Tibial Width Research Articles

Factors Contributing to Graft Matching in a Patellar Osteochondral Allograft Selection Model (211)

Objectives:Patellar osteochondral allograft (OA) transplantation has been shown to be a successful treatment in patients with isolated patellar cartilage injury. Currently, there is minimal guidance in anatomic and sizing factors that portend similar patellar surface topography. The most commonly utilized patellar sizing criteria to match the donor and recipient is radiographic tibial width. Our hypothesis is that specific patella anatomic factors will better predict surface topography matching. To our knowledge, no prior study has investigated the topography of the patella and what intrinsic factors of the graft and the recipient affect matching of the chondral and osseous layers between the graft and defect.Methods:Computed tomography (CT) images of the specimens were acquired and three-dimensional (3D) CT models of the patella were then created and exported into point-cloud models using a 3D reconstruction software program. Circular articular cartilage and subchondral bone defect models were created in each point-cloud model of the recipient patella with a diameter of 18 mm and 22.5 mm at 3 locations: the medial, central, and lateral portions of the patellar surface. Circular articular cartilage and subchondral bone graft models were created on all possible locations on the articular cartilage surface models of the donor patellae (Figure 1). The graft models were virtually placed on the surface of the defect model. Orientation of the graft model was adjusted so that its axis matched that of the defect site. Least distances between the graft and the defect articular surface models were calculated and were defined as the shortest distance from the point in question to the corresponding point in space. A mean value of the least distances was calculated for each position of the graft model. The mean least distance of subchondral bone surface in each point was calculated simultaneously. The graft model was then rotated 360° around the axis perpendicular to the articular cartilage surface in 1° increments, and the least distance of articular cartilage surface and the resulting least distance of subchondral bone surface were calculated at each rotating angle. This procedure was repeated for all points in the articular surface model of the donor patella. Step-off was then calculated as the least mean square difference between the defect and graft along the periphery. Stepwise linear regression was used for each defect location to analyze which variables predict degree of mismatch in millimeters.Results:A total of 16 patella were utilized in analysis. Comparison of cartilage least mean square distances between locations demonstrated that the lateral location had significantly less surface incongruity compared to the other two locations (vs medial: p = .0038, vs central: p = .0046). In addition, significant differences in subchondral bone distances were observed between the locations (lateral vs medial: p = .0007, lateral vs central: p < .0001, medial vs central: p < .0001) (Table 1). The associations of six anatomic and morphologic variables with cartilage mismatch, bone mismatch, and step-off for 18 mm and 22.5 mm defects are presented in Tables 2 and Table 3. All variables were analyzed as the difference in value between the recipient and donor. For both lesion sizes, cartilage step-off was the most susceptible to variable differences. Compared to the 18 mm defect group, the 22.5 mm defects were more affected (higher coefficients) by the same differences in variables. Differences in tibial width were associated mismatch for central lesions (eg. 22.5mm defect coefficient: -0.026, p < .001), while cartilage width was associated with mismatch for lateral lesions. (eg. 22.5 mm defect coefficient: -0.034, p < .023).Conclusions:Multiple clinically relevant factors were found to affect graft and defect chondral mismatch and to a lesser extent osseous mismatch. For all three locations at both defect sizes, step-off was the most susceptible to differences in patellar morphology between the donor and recipient. In addition, differences in tibial width, a commonly used metric for patellar graft matching, did not significantly predict chondral mismatch for lateral and medial sized lesions. These findings should be considered when selecting and preparing the graft in a patella osteochondral allograft procedure.

The Effect of Patellar Surface Morphology On Subchondral Bone Alignment When Matching Patellar Osteochondral Allografts (206)

The Effect of Patellar Surface Morphology On Subchondral Bone Alignment When Matching Patellar Osteochondral Allografts (206)

Measuring Proximal Tibial Metaphyseal Width and Lateral Epiphyseal Height Improves Determination of Remaining Growth in Children.

Accurate assessments of skeletal maturity is of critical importance to guide type and timing of orthopaedic surgical interventions. Several quantitative markers of the proximal tibia were recently developed using historical knee radiographs. The purpose of the present study was to determine which marker would be most effective in assessment of full-length radiographs in a modern pediatric patient population. All full-length radiographs at our institutions between 2013 and 2018 were reviewed. Inclusion criteria for our study required that the child reached final height as defined by 2 consecutive unchanged heights, at least 6 months apart, after age 16 for boys and 14 for girls. Patients with metabolic bone disease, prior surgery such as epiphysiodesis, or previous infections around the knee were excluded. Summary statistics for each of the 3 proximal tibial ratios were calculated and multiple linear regression was performed with percent of growth remaining as a dependent variable. A recommended regression model is presented and evaluated. A total of 692 full-length radiographs met inclusion criteria. Proximal tibial ratios were calculated and averaged values for each percent of growth remaining was presented. Multiple linear regression demonstrated that using all 3 variables led to overfitting of the model so tibial metaphyseal width/lateral tibial epiphyseal height was selected as the optimal ratio for use by clinicians. The optimal model for determining growth was found to have R2=0.723 in the developmental set and R2=0.762 in an excluded validation set. This study demonstrates that the proximal tibial metaphyseal width/lateral tibial epiphyseal height is the ideal measurement for clinicians seeking to determine growth remaining in children. It presents average values between 0% and 25% of growth remaining. This study also develops and validates a multivariable regression model for determining percentage of growth remaining in children that will allow for quantitative determination of growth using full-length radiographs. Level III.

Evaluation of anatomical axis-joint center distance and anatomical axis-joint center ratio in distal femur and proximal tibia in coronal plane of Indian population

BackgroundRadiographic evaluation of the anatomical geometry of the bone is important for executing reconstructive surgeries like deformity correction, limb lengthening and joint replacements. Various studies have been done in the past to define the anatomic placement of implant inside the bone. The aim of this study is to evaluate the distance between the anatomical axis and joint center of the distal femur (aJCD-f) and proximal tibia (aJCD-t) along with the ratio of anatomical axis-joint center distance of distal femur (aJCR-f) and proximal tibia (aJCR-t) of the skeletally mature individual of Indian population along with its application in day to day practice. MethodsData is procured from the standard radiographs of the knee on large films. The anatomical axis is drawn on both sides of tibia and femur in a standard fashion. These lines intersect the horizontal drawn line at the intercondylar notch of femur and joint orientation line of the tibia. The aJCD-f, aJCD-t, aJCR-f, aJCR-t are then measured. Also the center of the inter-spinous distance of the tibia is measured from the anatomical axis (aSCD-t). ResultsA total of 182 x-rays of skeletally mature individual were included with mean age of 46.35 ± 13.93 years. Of them 81 were males and 101 were females. There were 89 x-ray of left side and 93 x-ray of right side. The mean width of the femur at the intercondylar notch is found to be 76.78 mm (±7.40). The mean aJCD-f is found to be 3.87 mm (±2.44), aJCR-f to be 0.50 (±0.06). The mean width of the tibia is found to be 76.80 mm (±6.48). The aJCD-t is found to be 2.20 mm (±1.41), aJCR-t to be 0.50 (±0.03). The aSCD-t at the level of tibial spine is found to be −0.23 mm (±2.84). There was significant difference in the width of the femoral condyle of males 82.13 mm (±0.65) and females 72.48 mm (±0.55). Males showed mean aJCD-f of 3.59 mm (±2.42) and females showed 4.10 mm (±2.46). The aJCR-f is found to be significantly different between males 0.49 (±0.05) and females 0.51 (±0.07). There is significant difference between the width of the proximal tibia between males 80.83 mm (±0.68) and females 73.56 mm (±0.46). The aJCD-t of males and females is found to be 2.28 mm (±1.25) and 2.16 mm (±1.54) respectively. The aJCR-t is found to be significantly different between males 0.49 (±0.03) and females 0.50 (±0.04). While the mean distance of the anatomical axis from the lateral tibial spine is 0.23 mm lateral to the center of the inter-spinous distance and is found to be same in both males and females −0.23 mm (±2.84). ConclusionThe coronal plane parameter like aJCD, aJCR of femur and tibia and aSCD-t of tibia can be a useful parameter to calculate in the ‘real world’ settings for reconstructive surgeries like deformity correction, nailing through the knee for femur and tibia as well as replacement surgeries around knee.

GROWTH OF THE PEDIATRIC KNEE MENISCUS: A CADAVERIC STUDY

Background:The menisci of the knee play a critical role in maintaining structural integrity, as well as in load bearing and shock absorption. In adolescent patients, meniscal tear is a very common sports injury, and is frequently associated with concomitant traumatic injuries including tibial eminence fracture or ACL tear. The incidence of pediatric meniscal tears is increasing, and anatomic studies to guide repair, saucerization and transplantation do not exist.Hypothesis/Purpose:This study’s purpose was to evaluate meniscus dimensions in the developing meniscus and provide anatomic parameters for repair, saucerization, resection, transplantation.Methods:From images of 29 dissected cadaveric knee specimens between 1 month and 132 months of age obtained on a copy stand (14 left knee, 15 right knee), we made direct length measurements from the inner to outer meniscus rim at 45 degree intervals (12, 1:30/10:30, 3:00/9:00, 4:30/7:30 o’clock, 6 o’clock) using Autodesk Fusion 360 software (Figure 1.1). We also measured width between the outer medial and lateral meniscus rims, as well as CT measurements of coronal and sagittal width of the tibial plateau using OsiriX DICOM software. Generalized linear models were used to evaluate the associations of meniscal length measurements with age, tibial width, and meniscal width measurements. All statistical analyses were completed with a two-sided level of significance of 0.05.Results:All radial length measurements were predicted to increase significantly with age (p < 0.01), as coronal tibial width increases (p < 0.05), and as lateral-medial meniscal width increases (p < 0.001) (Figure 1.2). Other than the lateral 3 o’clock measurement (p = 0.119), all radial measurements were predicted to increase significantly as sagittal tibial width increases (p < 0.05). The posterior zones of the medial meniscus (6:00, 4:30/7:30) were found to increase in radial length at a faster rate than the anterior zones. The anterior zones of the medial meniscus (12:00, 1:30/10:30) had the slowest rate of growth.Discussion/Conclusion:Meniscus radial length is related to age, tibial plateau width, and lateral-medial meniscus width. Radial dimensions from normal lateral menisci may allow the surgeon to obtain ideal size of resection, saucerization of discoid menisci. The growth of medial meniscus posterior zones is greater than the anterior zones. This may be attributed to increased posterior region load bearing which increases with ambulation in the developing child. Improved anatomic understanding may help surgeons plan for discoid resection/saucerization/repair, and also support appropriate selection of meniscus allograft for transplantation.Figure 1.1.Figure 1.2.

Use of the forgotten joint score (FJS)-12 to evaluate knee awareness after isolated anterior cruciate ligament reconstruction with and without meniscus repair or partial meniscectomy.

The aim of this study was to compare knee awareness, based on the FJS-12 score, among three patient groups: Anterior cruciate ligament reconstruction (ACLR), ACLR + meniscus repair and ACLR + partial meniscectomy. The relationship between FJS-12 scores and scores on other instruments (Lysholm Knee Scoring Scale, Tegner Activity Level Scale, KOOS and WOMAC) was also evaluated. Forty-three patients were divided into group A (isolated ACLR) group B (ACLR + meniscectomy) and group C (ACLR + meniscus repair). Graft thickness, femoral tunnel width, tibial tunnel width, tibial screw thickness and follow-up time were evaluated in all three groups. The subjective knee scores (KOOS, WOMAC, Lysholm Knee Scoring Scale, Tegner Activity Level Scale and FJS-12) of the groups were then compared. FJS-12 scores of 43 patients were evaluated. The mean age was 26.1 ± 6.5years (range: 18-40years). Group A: 23; group B: 9 and group C include 11 patients. The mean FJS-12 score of group B (median: 100 [range: 98-100]) was higher than that the others. Spearman's rho test showed that the FJS-12 is highly compatible with the other scores. According to this study, FJS-12 and the other scoring systems showed that ACLR with partial meniscectomy is the most effective surgical method to restore normal sensation in the knee.

Comparison of outcomes of ORIF versus bidirectional tractor and arthroscopically assisted CRIF in the treatment of lateral tibial plateau fractures: a retrospective cohort study

BackgroundLateral tibial plateau fractures (TPFs) are often treated with conventional open reduction and internal fixation (ORIF) through standard anterolateral sub-meniscal arthrotomy. There has been increasing support for “bidirectional rapid redactor” device-assisted closed reduction and internal fixation (CRIF) for treating TPFs. The aim of the present study is to compare the clinical and radiological outcomes between CRIF and ORIF procedures.MethodsWe performed a retrospective cohort study of 55 lateral TPF patients (Schatzker types I–III) who accepted surgical treatment at our trauma level 1 center between January 2016 and January 2018. They were divided into the CRIF group (32 patients) and the ORIF group (23 patients) based upon the different surgical protocols. The patients’ clinical outcome analysis was evaluated by using the Knee Society Score (KSS) and Rasmussen’s clinical score. For radiological assessment, changes in tibial plateau width (TPW), articular depression depth (ADD), medial proximal tibial angle (MPTA), and posterior tibial slope angle (PTSA) were evaluated using radiographs and computed tomography (CT) scan.ResultsThe CRIF group had a mean follow-up of 28.9 months, and the ORIF group had a mean follow-up of 30.7 months (p>0.05). Furthermore, there was no statistically significant difference in terms of age, gender, injury mechanism, follow-up time, time interval from injury to surgery, and Schatzker classification in the two groups. With respect to the clinical outcomes including the KSS score and Rasmussen’s clinical score, there was also no significant difference (p>0.05). Nevertheless, the CRIF group had lower intra-operative blood loss, shorter hospitalization days, and better range of movement of the knee joint than the ORIF group (p<0.05). Furthermore, CRIF had better radiological results when compared to the ORIF group using Rasmussen’s radiological score (p<0.05), although no significant difference was observed in TPW, ADD, MPTA, and PTSA between the two groups (p>0.05).ConclusionThe present study showed that CRIF could achieve comparable clinical outcomes and better radiological results for treating lateral TPFs as compared with conventional ORIF.

Does Proximal Placement of the Syndesmotic Reduction Clamp Affect the Optimal Position for the Medial Tine? A Cadaveric Pilot Study

Sagittal plane syndesmotic malreduction is associated with off-axis, eccentric reduction clamping and preferential placement of the medial tine anteriorly has been proposed to minimize the malreduction risk. Although clamp placement 1cm proximal to the plafond is recommend, no previous study has assessed whether differences in the anatomic position of the fibula within the incisura (eccentric 1cm superior and concentric 2 cm superior to the tibial plafond) affect the optimal position for the clamps medial tine during reduction of the syndesmosis. The purpose of the present cadaveric pilot study was to evaluate and compare the sagittal syndesmotic malreduction rate with various clamping vectors, 1cm and 2cm from the tibial plafond, respectively. Six through the knee cadaveric specimens were obtained. Kirschner wires and a surgical maker were used to denote placement of the reduction clamp laterally on the peroneal ridge of the fibula, and medially within the anterior, middle, and posterior thirds (Zones A, B, C) of tibia's width; 1 cm and 2 cm from the plafond. CT scans were obtained as controls, followed by destabilization of the syndesmosis. Reductions were then performed sequentially at each level (1 cm, 2 cm) and zone (A, B, C); and CT scans repeated for assessment. In most specimens (n = 5), an eccentric (1 cm) to concentric (2 cm) positional transition was observed within incisura fibularis. The transition altered the resulting fibular displacements in some specimens (2A anterior, vs 2B posterior), resulting in a higher malreduction rate with anterior (zone 2A, 33%) vs central (Zone 2B, 17%) positioning of medial tine. Although no definitive conclusions can be reached from the present pilot study, future studies with a greater number of specimens and clamping vectors are warranted to determine whether positional transitions of the fibula within the incisura fibularis affect the optimal position for the clamps medial tine.

Medial meniscus extrusion is more strongly associated with tibial osteophyte width than the femur in osteoarthritis of the KNEE

Purpose: Medial meniscus extrusion (MME) has been suggested to be a risk factor for the progression of knee osteoarthritis (knee OA). However, its pathophysiological mechanism remains unclear. Anatomically, meniscus attaches to the femur by menisco-femoral ligament and to the tibial plateau by menisco-tibial ligament (coronary ligament). In particular, the menisco-tibial ligament plays an important role for the stability of meniscus to the tibial plateau. As osteophyte is formed in the similar process which is observed in an endochondral ossification, osteophyte is composed of not only bone part but also cartilage part at the peripheries of the articular cartilage.

Patient Height may Predict the Length of the Anterior Cruciate Ligament: A Magnetic Resonance Imaging Study

PurposeThe purpose of this study was to measure the length and width of anterior cruciate ligament (ACL) tibial footprint using magnetic resonance imaging (MRI) and to evaluate correlation between patients’ weight and height with the tibial footprint size.MethodsIn total, 207 eligible patients underwent MRI scanning from June 2018 to June 2020. One hundred seventeen knees from patients aged 18 to 40 years old with intact ACL were included in this study. Data of weight, height, body mass index (BMI) from physical examination and tibial footprint length and width from MRI were obtained. Relationship of ACL tibial footprint length <14 mm and association between ACL tibial footprint sizes of MRI with height, weight, and BMI were analyzed.ResultsThe ACL tibial footprint length and width were, respectively, 11.9 ± 1.8 mm and 10 ± 1.5 mm. Proportion of ACL footprint <14 mm in length was 89.7%. Patient height ≥170 cm was the best predictor of ACL tibial footprint length <14 mm (P = .025). There was a statistically significant relationship between the height of the patients and the length of the ACL tibial footprint. The length of the ACL tibial footprint could be predicted by the formula: length = −7.362 + 11.48 × (height in meters).ConclusionThe height of the patients may predict the length of the ACL tibial footprint. Although patient’s age, sex, and BMI correlate poorly with ACL tibial footprint width, there was no correlation between patient’s weight and ACL tibial footprint size.Clinical RelevanceBefore ACL reconstruction surgery, an estimation of ACL tibial footprint size might aid in the graft harvesting preparation.

Current Measurement Strategies of Coronal Tibiofemoral Subluxation: A Systematic Review of Literature.

OBJECTIVE. Coronal tibiofemoral (TF) subluxation has generated interest in the last several years due to newfound clinical implications of its presence. However, controversy within the literature concerning how to measure and calculate coronal TF subluxation on radiographic imaging remains. The purpose of this study was to describe how coronal TF subluxation is being measured and calculated in the literature with the goal of describing a reproducible and validated technique for clinical adoption. MATERIALS AND METHODS. A PubMed literature search was performed in March 2020 according to PRISMA guidelines. The terms "tibiofemoral subluxation" and "tibial femoral subluxation" were included in the search. Criteria of interest included radiographic view and evaluation, anatomic landmarks used, and measurement validity. RESULTS. Review of relevant literature resulted in 744 articles, 16 of which met our inclusion criteria. A wide range of measuring techniques, anatomic landmarks, and radiographic views were used with varying validity. Full-limb radiographic views were the most common. Six studies measured the translation of the mechanical axes of the tibia and femur. Eight studies measured the translation of either femoral condyle in reference to the tibial plateau. Coordinate-based software with the iterative closest point algorithm was used in two studies. Whether coronal TF subluxation should be divided by tibial plateau width to account for knee size was controversial. CONCLUSION. A variety of approaches exist for diagnosing and quantifying coronal TF subluxation because of the lack of clear anatomic landmarks within the TF joint that can be used to measure coronal TF subluxation in the horizontal plane. Even when using the same anatomic landmarks, studies varied on how to measure coronal TF subluxation radiographically and whether knee size should be accounted for. Further studies are necessary to standardize (via inter- and intraobserver validation with a control group) an easy, reproducible, and minimally biased approach to measuring coronal TF subluxation on radiographic imaging. We believe our systematic review succinctly provides the necessary information to either develop such a tool or encourage future studies to compare existing techniques to find the most reliable and clinically useful approach for evaluating coronal TF subluxation.

Biomechanical Basis of Predicting and Preventing Lower Limb Stress Fractures During Arduous Training.

Stress fractures at weight-bearing sites, particularly the tibia, are common in military recruits and athletes. This review presents recent findings from human imaging and biomechanics studies aimed at predicting and preventing stress fractures. Peripheral quantitative computed tomography (pQCT) provides evidence that cortical bone geometry (tibial width and area) is associated with tibial stress fracture risk during weight-bearing exercise. The contribution of bone trabecular microarchitecture, cortical porosity, and bone material properties in the pathophysiology of stress fractures is less clear, but high-resolution pQCT and new techniques such as impact microindentation may improve our understanding of the role of microarchitecture and material properties in stress fracture prediction. Military studies demonstrate osteogenic outcomes from high impact, repetitive tibial loading during training. Kinetic and kinematic characteristics may influence stress fracture risk, but there is no evidence that interventions to modify biomechanics can reduce the incidence of stress fracture. Strategies to promote adaptive bone formation, in combination with improved techniques to assess bone strength, present exciting opportunities for future research to prevent stress fractures.

Chipping corrective osteotomy for reconstruction of malunion with angular deformity of the lower extremity: Technical tips and preliminary clinical results.

Significant functional disturbance, deformity, and malalignment may occasionally develop after healing of a fracture, especially one involving the lower extremities. This study sought to provide preliminary evidence of the effectiveness of chipping corrective osteotomy (CCO), which does not require autologous bone grafting, for treating malunion with lower extremity angular deformity. We retrospectively reviewed clinical and radiologic results of 6 male patients (median age 48.5 years) treated with CCO for femoral and tibial malunion (4 femurs, 4 tibias) with angular deformity in the coronal plane. In performing CCO, we applied a temporary external fixator to correct the deformity; definitive fixation was performed using a locking plate. Time to consolidation after the surgery was recorded. The Mikulicz line was evaluated before surgery and at final follow-up in each patient to confirm a change in alignment of the affected lower extremity. We measured the score taken as the ratio of the distance between the medial tibial joint surface and the Mikulicz line to the width of the tibial plateau. Median follow-up duration was 34 months. Bone healing was achieved by a median of 3.5 months postoperatively. Correction of the mechanical axis in the affected lower extremity was achieved in all 6 patients. Median score by the length from the tibial medial joint surface to the Mikulicz line to the tibial plateau width was 7.7% preoperatively and 25.7% at final follow-up. These preliminary findings suggest that CCO is potentially useful for treating malunion with lower extremity angular deformity. Further evaluation in a larger series is needed to clarify the usefulness of CCO in correction of angular malunion.

Radiographic assessment of bone tunnels after anterior cruciate ligament reconstruction: A comparison of hamstring tendon and bone-patellar tendon-bone autografting technique.

Objectives This study aims to compare the postoperative change of femoral and tibial tunnel widths after hamstring tendon (HT) and bone-patellar tendon-bone (BPTB) autografting in primary anterior cruciate ligament (ACL) reconstruction surgery with the anteromedial portal technique.Patients and methods This case-control and retrospective study included 39 patients (36 males, 3 females; mean age 30.1±7.9; range, 17 to 44 years) who underwent primary ACL reconstruction surgery with either BPTB autografting method (BPTB group, n=18) or HT autografting method (HT group, n=21) between March 2014 and December 2016. Femoral fixation was achieved with bioabsorbable screw in BPTB group and endobutton in HT group. Tibial fixation was achieved with bioabsorbable interference screw in both groups. Femoral and tibial tunnel widths of groups were compared on digital radiographs.Results When we compared the baseline values with the second-year results, the mean of femoral tunnel widths were significantly lower on radiographs at the second-year evaluation in both groups (p<0.001 for all). However, the means of tibial tunnel widths were significantly lower only in the BPTB group (p<0.001 for BPTB group and p=0.616 for HT group). Change levels of anteroposterior and lateral widths were more prominent in BPTB group than HT group (p<0.001 for all).Conclusion Changes in tunnel widths show us superior ossification in BPTB grafting. This can be explained by superior bone-to-bone healing. As a result of radiological evaluation, we think that BPTB grafting can be more strong and durable.

Defining the role of TT-TG and TT-PCL in the diagnosis of lateralization of the Tibial tubercle in recurrent patellar dislocation

BackgroundThe radiological indicators can help doctors determine whether to make tibial tubercle transfer. But which indicator is better is still in question.Methods117 knees in 103 patients who had undergone patellar surgery and 60 knees in 58 patients who had no history of patellar dislocation from 2014 to 2019 were analyzed. Significant differences of tibial tubercle–trochlear groove (TT-TG) on CT and tibial tubercle–posterior cruciate ligament (TT-PCL) on MRI between the case group and the control group were estimated by an unpaired t test. Significant differences between TT-TG on CT and TT-TG on MRI were estimated by a paired t test. The correlation between TT-PCL on MRI and tibial width was estimated by Pearson test. Receiver operating characteristic (ROC) curves and the area under the ROC curve (AUC) were measured to assess the diagnostic accuracy of TT-TG and TT-PCL on MRI.ResultsThe intraclass correlation coefficient (ICC) for TT-TG between CT and MRI evaluated by two raters was were 0.566. When comparing TT-TG on CT with that on MRI, the mean difference was 2.5 mm (p< 0.001). The mean TT-TG difference on CT between the case group and the control group was 5.3 mm, which was significantly bigger than the mean TT-PCL difference on MRI of 1.2 mm(p< 0.001). AUC of TT-TG on CT and TT-PCL were 0.838 and 0.580 (P< 0.001). TT-PCL correlated with tibial width (r=0.450, P< 0.001).ConclusionA statistically significance and a fair ICC proved that TT-TG could not be used interchangeably. The bigger mean difference between the case group and the control group and better AUC proved that TT-TG on CT might be an indicator more suitable for measuring the lateralization of the tibial tubercle. And TT-PCL should be considered as an individual parameter because of the significant correlation between TT-PCL and tibial width.

The Ratio of the Distal Femur Width to the Tibial Plateau Width with Advancing Age

Historically, intraoperative analysis of knee fracture procedures relied upon a fluoroscopic reduction assessment by the surgeon. This is a subjective assessment due to the lack of linear measurement reference data. Compared with the knee, the ankle and wrist have well-established bony anatomical relationships to guide reduction assessment during fracture treatment. The purpose of this study was to (1) determine the width ratios in the knee (plateau to femur) with aging, and (2) determine knee width changes with aging. One-hundred and fifty consecutive uninjured knee radiographs were reviewed. In all age groups, the width ratio of the articular distal femoral (ADF) to the articular tibial plateau (ATP) is greater than 1.0 and between 1.03 and 1.05. The tibia plateau width is on average 9.34 mm wider and the femoral width is 8.0 mm wider in the 61 to 80 age group than the ATP and the ADF in the younger age groups. In conclusion, the articular tibial plateau width and the articular distal femoral width are nearly equal across ages 20 to 80 years. An absolute articular width value by age cannot be assigned because articular widths change with aging.

IS THE "U-SIGN" RADIOLOGIC FEATURE OF A POSTERIOR CRUCIATE LIGAMENT TIBIAL AVULSION FRACTURE?

ABSTRACTObjective: By analyzing our cases of posterior cruciate ligament (PCL) tibial avulsion fracture, we noted that a U-shaped image was present in the anteroposterior plain radiographs view of the affected knee, even in cases where the profile view of the knee had been inconclusive as to tibial PCL avulsion fracture, a “hidden” fracture. Therefore, we aimed to investigate whether there was an anatomical correlation between this radiological U sign and the tibial insertion of the PCL and to ascertain the intra- and inter-rater reliability of this sign in clinical practice.Methods: The data of the widths and heights area of the PCL tibial insertion area, and the U sign area were measured and compared to the largest width of the tibia. Two moreover, the reliability and reproducibility of this imaging were analyzed.Results: The areas height of the U-sign area and the anatomical insertion area of the posterior cruciate ligament showed no difference, and both were topographically located in the two central quarters of the proximal end of the tibia. The radiographic assessment showed excellent Kappa agreement rates between interobserver and intraobserver, with high reliability and reproducibility.Conclusion: The U sign is a radiographic feature of PCL tibial avulsion fracture seen on the radiograph AP view, there is a high association between the ratios of the U-sign area height in the X-ray and the anatomical height of the PCL tibial insertion site MRI with the largest width of the proximal tibia. The radiographic U sign showed excellent rates of interobserver and intraobserver agreement with Kappa values higher than 0.8. Level of Evidence IV; Dignostic Studies - Investigating a Diagnostic Test.

Three dimensional modeling and quantitative analysis of long bone parameters of rabbit using micro-computed tomography.

Micro-computed tomography (µCT), a modern imaging technique, provides detailed information on the bone morphology of small animal models. The objectives are 1) to produce three dimensional (3D) models from µCT images of femoral and tibial bones of New Zealand rabbits, and 2) to estimate and compare morphometric and volumetric results among genders as well as left and right sides. A total of twenty adult New Zealand rabbits (10 females, 10 males, aged 12-18 weeks, weight= 2.5-3 kg) were used for this study. ‏‏Three dimensional reconstructed models of the femoral and tibial bones of rabbits were created from cross-sectional images of µCT using the 3D Slicer program. Anatomical structures were determined on these 3D bone models. Afterward, morphometric parameters such as length, thickness, and width of various parts of the bones were calculated with volume and volume ratio values of cortical bone, trabecular bone, and medullary cavity. The gender*laterality interaction term was found statistically significant in measurements of femoral diaphysis diameter (FDD), internal femoral diaphysis diameter (IFDD), femoral head diameter (FHD), tibial diaphysis diameter (TDD), tibial distal width (TDH), and tibial proximal width (TPW) (P<0.001). The gender*laterality interaction term was not significant in volume and volume fraction values of cortical bone, trabecular bone, and medullary cavity (P>0.05). It is thought that the study will contribute to the orthopedic experimental studies of rabbits for femoral and tibial bones and will bring a modern perspective to the field of veterinary anatomy.

EFFECT OF PHYTASE ENZYME AND CITRIC ACID ON PRODUCTIVE PERFORMANCE, NUTRIENT RETENTION AND TIBIA BONE OF BROILER CHICKS FED LOW AVAILABLE PHOSPHORUS DIET

The study investigate the effect of feeding low available phosphorus (AP) diet supplemented with three levels of microbial phytase (MP) and /or three levels of citric acid (CA) on broiler performance, tibia bone and nutrient retention. Four hundred day- old Ross broiler chicks were randomly allocated into ten treated groups, with four replicates of 10 birds each. The chicks were fed ten different diets as normal phosphorus 0.45% AP (positive control, PC) and nine groups with phosphorus deficient diets 0.25% AP (negative control, NC) supplemented with three CA levels as 0%, 1% or 2% and / or MP levels 0, 500 and 1000 FTU/Kg. The results indicated that supplementation of MP and /or CA into NC diet significantly improved body gain of chicks. Feed intake significantly increased due to adding 1% CA and MP levels into NC diet. Feed conversion ratio improved due to supplementing MP or CA into NC diet. There is no significant effect on tibia width and breaking strength by adding MP and/or CA into NC diet. Adding MP into NC diet significantly improved tibia length, weight, and ash content while, citric acid affected significantly at the first stage of growth only. Blood phosphorus increased significantly by supplementing MP into NC diet at the 5th week of age, while blood calcium was not affected significantly by MP and/or CA. Tibia calcium of chicks fed NC diet was higher than those fed PC diet or NC diet enriched with MP and/or CA. Tibia phosphorus did not response clearly for adding MP or CA into NC diet. Nitrogen and calcium retention of chicks fed NC were significantly lower than those fed PC or NC diet supplemented with 1000 FTU/kg MP and CA. Phosphorus retention of chicks fed NC diet was significantly similar for those fed PC or NC diets supplemented with MP and/or CA. It can be concluded that adding MP at 500 FTU/kg level with 1% CA into NC diet was effectiveness to improve body weight gain and tibia bone characteristics as like as those fed PC or NC diet enriched with 1000 FTU/kg MP.

Is the fibula positioned posteriorly in weight-bearing in individuals with chronic ankle instability? A case control study

ABSTRACT Background: Clinically, a discrepancy of fibular position in relation to the tibia has been proposed as a factor in the persistence of chronic ankle instability (CAI). Previous studies have produced conflicting findings, perhaps due to varying radiological methods and measurement of participants in non-weight-bearing positions. Objectives: To compare normalized-fibular position in weight-bearing in individuals with CAI with healthy controls. Design: A weight-bearing lateral X-ray was taken of the affected ankle of 33 adults with CAI and 33 matched controls. The distance between the anterior edges of the distal fibula and tibia was recorded, and then normalized as a proportion of maximal tibial width. Normalized-fibular position was compared between groups using independent t-tests. Intra-class correlation coefficients (ICC2,1) were calculated to determine reliability of measurements. A receiver-operating characteristic (ROC) curve was used to determine sensitivity, specificity, and a cutoff score to differentiate individuals with CAI from controls using normalized-fibular position. Results: Normalized fibular position was significantly different (CAI, 29.7 (6.6)%; healthy, 26.7 (4.8)%) between the groups. Measurement of intra-rater (0.99, 95%CI = 0.98 to 1.00) and inter-rater (0.98, 95%CI = 0.96 to 0.99) reliability were both excellent. The threshold normalized-fibular position was 27%, with a score more than 27% indicating a greater chance of being in the CAI group. Sensitivity was 69.7% and specificity was 54.5% for this threshold. Conclusion: A slightly posteriorly positioned fibula in relation to the tibia was observed in people with CAI. Specificity/sensitivity scores for normalized-fibular position indicate that it has little ability to predict CAI alone.