Through Transmission Electron Microscopy Research Articles

Zein/fucoidan-coated phytol nanoliposome: preparation, characterization, physicochemical stability, in vitro release, and antioxidant activity.

To improve phytol bioavailability, a novel method of magnetic stirring and high-pressure homogenization (HPH) combination was used to prepare zein/fucoidan-coated phytol nanoliposomes (P-NL-ZF). The characterization, the simulated in vitro digestion, and the antioxidant activity of these phytol nanoliposomes from the different processes have been studied. Based on the results of dynamic light scattering (DLS) and gas chromatography-mass spectrometer (GC-MS) analysis, P-NL-ZF prepared through the combination of magnetic stirring and HPH exhibited superior encapsulation efficiency at 76.19% and demonstrated exceptional physicochemical stability under a series of conditions, including storage, pH, and ionic in comparison to single method. It was further confirmed that P-NL-ZF by magnetic stirring and HPH displayed a uniform distribution and regular shape through transmission electron microscopy (TEM). Fourier-transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) analysis showed that electrostatic interactions and hydrogen bonding were the primary driving forces for the formation of composite nanoliposomes. Additionally, an in vitro digestion study revealed that multilayer composite nanoliposomes displayed significant and favorable slow-release properties (58.21%) under gastrointestinal conditions compared with traditional nanoliposomes (82.36%) and free phytol (89.73%). The assessments of chemical and cell-based antioxidant activities demonstrated that the coating of zein/fucoidan on phytol nanoliposomes resulted in enhanced effectiveness in scavenging activity of ABTS free radical and hydroxyl radical and mitigating oxidative damage to HepG2 cells. Based on our studies, the promising delivery carrier of zein/fucoidan-coated nanoliposomes is contributed to the encapsulation of hydrophobic natural products and enhancement of their biological activity. © 2024 Society of Chemical Industry.

First integration of Ni barrier layer for enhanced threshold switching characteristics in Ag/HfO2-based TS device

Utilizing Ag/HfO2 with nickel (Ni) as a barrier layer, a novel threshold switching (TS) device is devised to overcome challenges such as low reliability, high threshold voltage, and high leakage current. Compared against an Ag/Ti/HfO2-based TS device, the Ag/Ni/HfO2-based TS device exhibits improved electrical characteristics: yield enhancement from 31.7 % to 40.0 %, enhanced endurance from ∼10 cycles to ∼300 cycles, and suppression in off-state current (IOFF) from 1.2 × 10−7 A to 5.2 × 10−10 A under a high compliance current (e.g., 10−4 A). The results obtained through transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and atomic force microscopy (AFM) support the evidence of those accomplishments. Reducing the effective area of the TS device improves control over erratically generated filaments and the electric field within the switching layer, resulting in enhanced performance such as a reduced threshold voltage (VTH ∼0.35 V), minimized VTH variability (∼0.01 V), decreased a threshold current (ITH, i.e., the leakage current in the off-state before activation, ∼5.2 × 10−10 A), and maximum conductance (∼5.0 × 10−5 S) of low-resistance state. These findings suggest that the optimized Ag/Ni/HfO2-based TS device can serve as a practical solution for low-power applications.

Exosome miR-4738-3p-mediated regulation of COL1A2 through the NF-κB and inflammation signaling pathway alleviates osteoarthritis low-grade inflammation symptoms.

This study aimed to elucidate the roles of microRNA (miR)-4738-3p and the collagen type I alpha 2 chain (COL1A2) gene in the pathogenesis of osteoarthritis (OA) through bioinformatics analysis and cellular assays. The GSE55235 dataset was analyzed using the weighted gene co-expression network analysis (WGCNA) method to identify gene modules associated with OA. Key overlapping genes were identified from these modules and the GSE55235-differential expressed genes (DEGs). The expression levels of selected genes were determined in C28/I2 cells using the quantitative real-time polymerase chain reaction (qRT-PCR). The interaction between miR-4738-3p and COL1A2 was examined in the context of interleukin 1 beta (IL-1β) induction. Exosome characterization was achieved through transmission electron microscopy (TEM), western blotting (WB), and other analyses. The study also investigated the functional relevance of miR-4738-3p in OA pathology through various molecular and cellular assays. Our findings revealed that the green module exhibited a strong correlation with the OA phenotype in the GSE55235 dataset, with COL1A2 emerging as a hub gene and miR-4738-3p as its key downstream target. IL-1β induction suggested that COL1A2 is involved in inflammation and apoptosis, while miR-4738-3p appeared to play an antagonistic role. The analysis of exosomes underscored the significance of miR-4738-3p in cellular communication, with an enhanced level of exo-miR-4738-3p antagonizing IL-1β-induced inflammation and promoting cell survival. Conversely, a reduction in exo-miR-4738-3p led to increased cell damage. This study established a clear regulatory relationship between miR-4738-3p and COL1A2, with the nuclear factor kappa B (NF-κB) signaling pathway playing a central role in this regulation. The miR-4738-3p significantly influences the OA-associated inflammation, primarily through modulation of COL1A2 and the NF-κB pathway. Therefore, targeting miR-4738-3p offers a potential therapeutic approach for OA, with exosome miR-4738-3p presenting a promising strategy.

The effect of molecular weight of chitosan on the size of chitosan-Cu2+ complex-stabilized sulfur nanoparticles

Chitosan (CS) samples with average molecular weight (Mw) of 80.4, 61.8, and 45.2 kDa were prepared by the heterogeneous degradation of CS using 1% H2O2 solution under ambient conditions. The degree of deacetylation (DD) of the resultant CS was almost unchanged compared with that of the original CS. The sulfur nanoparticles (SNPs) were prepared by acidification of sodium thiosulfate (Na2S2O3) in a CS-Cu2+ complex solution. The influence of Mw CS on the size of SNPs was investigated. The average size of the SNPs/CS-Cu2+ complexes measured through Transmission electron microscopy (TEM) images was 25.1, 32.3, and 48.3 nm for using CS with Mw of 80.4, 61.8, and 45.2 kDa, respectively. The obtained SNPs/CS-Cu2+ complexes were also characterized by Ultraviolet-visible (UV-Vis), Fourier-transform infrared (FTIR), and x-ray diffraction (XRD) measurements. The synthetic method is favorable for large-scale production. Furthermore, the SNPs/CS-Cu2+ complex can be used as an agent for controlling plant disease in agriculture.

Surface-Pore-Modified N-Doped Amorphous Carbon Nanospheres Tailored with Toluene as Anode Materials for Lithium-Ion Batteries.

The surface modification of amorphous carbon nanospheres (ACNs) through templates has attracted great attention due to its great success in improving the electrochemical properties of lithium storage materials. Herein, a safe methodology with toluene as a soft template is employed to tailor the nanostructure, resulting in ACNs with tunable surface pores. Extensive characterizations through transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption/desorption isotherms elucidate the impact of surface pore modifications on the external structure, morphology, and surface area. Electrochemical assessments reveal the enhanced performance of the surface-pore-modified carbon nanospheres, particularly ACNs-100 synthesized with the addition of 100 μL toluene, in terms of the initial discharge capacity, rate performance, and cycling stability. The interesting phenomenon of persistent capacity increase is ascribed to lithium ion movement within the graphite-like interlayer, resulting in ACNs-100 experiencing a capacity upswing from an initial 320 mAh g-1 to a zenith of 655 mAh g-1 over a thousand cycles at a rate of 2 C. The findings in this study highlight the pivotal role of tailored nanostructure engineering in optimizing energy storage materials.

Engineering a Hierarchy of Disorder: A New Route to Synthesize High-Performance 3D Nanoporous All-Carbon Materials*.

We report a new nanoporous amorphous carbon (NAC) structure that achieves both ultrahigh strength and high electrical conductivity, which are usually incompatible in porous materials. By using modified spark plasma sintering, we create three amorphous carbon phases with different atomic bonding configurations. The composite consists of an amorphous sp2-carbon matrix mixed with amorphous sp3-carbon and amorphous graphitic motif. NAC structure has isotropic electrical conductivity of up to 12,000 S/m, a Young's modulus of up to ∼5GPa, and Vickers hardness of over 900MPa. These properties are superior to those of existing conductive nanoporous materials. Direct investigation of the multiscale structure of this material through transmission electron microscopy (TEM), electron energy loss spectroscopy (EELS), and machine learning-based electron tomography revealed that the origin of the remarkable material properties is the well-organized sp2/sp3 amorphous carbon phases with a core-shell-like architecture, where the sp3-rich carbon forms a resilient core surrounded by a conductive sp2-rich layer. Our research not only introduces novel material with exceptional properties, but also opens new opportunities for exploring amorphous structures and designing high-performance materials. This article is protected by copyright. All rights reserved.

Structural, dielectric and magnetic properties of MnFe2O4/ MWCNTs based nanocomposites for technological applications

In this paper, the manganese ferrite/MWCNTs nanocomposites were prepared by functionalizing with MWCNTs in various wt% from x = 0 to x = 25. First the nanoparticles of manganese ferrites have been composed by means of sol-gel self-combustion route. Nanocomposites with manganese ferrite/MWCNTs were synthesized by ultra-sonication. The crystalline structures of the nanocomposites were confirmed using the x-ray diffraction techniques (XRD). The crystallite size of the prepared nanocomposites was determined and found in the range of 9.1 to 9.4 nm. FTIR analysis assisted to get the vibration bands at tetra- and octahedral sites. Furthermore, confirmation of the linkage between MnFe2O4 and MWCNTs and morphology of the prepared was investigated through transmission electron microscopy (TEM). The relaxation mechanism of the prepared nanocomposites for the applied frequency range from 1 MHz to 3 GHz has been investigated. The relaxation behavior due to hopping of electrons in GHz are the interest for this research work. The dielectric constant at high frequency is useful for the nanocomposites that can be used in high frequency devices. The magnetic properties of the prepared nanocomposites were also investigated with applying magnetic field. The soft magnetic nature of the prepared nanocomposites makes the excellent choice for the waste water treatment application.

FNDC5/irisin ameliorates bone loss of type 1 diabetes by suppressing endoplasmic reticulum stress‑mediated ferroptosis

BackgroundFerroptosis is known to play a crucial role in diabetic osteopathy. However, key genes and molecular mechanisms remain largely unclear. This study aimed to identify a crucial ferroptosis-related differentially expressed gene (FR-DEG) in diabetic osteopathy and investigate its potential mechanism.MethodsWe identified fibronectin type III domain-containing protein 5 (FNDC5)/irisin as an essential FR-DEG in diabetic osteopathy using the Ferroptosis Database (FerrDb) and GSE189112 dataset. Initially, a diabetic mouse model was induced by intraperitoneal injection of streptozotocin (STZ), followed by intraperitoneal injection of irisin. MC3T3-E1 cells treated with high glucose (HG) were used as an in vitro model. FNDC5 overexpression plasmid was used to explore underlying mechanisms in vitro experiments. Femurs were collected for micro-CT scan, histomorphometry, and immunohistochemical analysis. Peripheral serum was collected for ELISA analysis. Cell viability was assessed using a CCK-8 kit. The levels of glutathione (GSH), malondialdehyde (MDA), iron, reactive oxygen species (ROS), and lipid ROS were detected by the corresponding kits. Mitochondria ultrastructure was observed through transmission electron microscopy (TEM). Finally, mRNA and protein expressions were examined by quantitative real‐time PCR (qRT‐PCR) and western blot analysis.ResultsThe expression of FNDC5 was found to be significantly decreased in both in vivo and in vitro models. Treatment with irisin significantly suppressed ferroptosis and improved bone loss. This was demonstrated by reduced lipid peroxidation and iron overload, increased antioxidant capability, as well as the inhibition of the ferroptosis pathway in bone tissues. Furthermore, in vitro studies demonstrated that FNDC5 overexpression significantly improved HG-induced ferroptosis and promoted osteogenesis. Mechanistic investigations revealed that FNDC5 overexpression mitigated ferroptosis in osteoblasts by inhibiting the eukaryotic initiation factor 2 alpha (eIF2α)/activated transcription factor 4 (ATF4)/C/EBP-homologous protein (CHOP) pathway.ConclusionsCollectively, our study uncovered the important role of FNDC5/irisin in regulating ferroptosis of diabetic osteopathy, which might be a potential therapeutic target.

Synthesis and Sensing Response of Magnesium Antimoniate Oxide (MgSb2O6) in the Presence of Propane Atmospheres at Different Operating Voltages.

Nanoparticles of MgSb2O6 were synthesized using a microwave-assisted wet chemistry method, followed by calcination at 700 °C. Their ability to detect different concentrations of propane gas (C3H8) at various operating voltages was evaluated. The material's crystalline phase was identified using X-ray powder diffraction (XRD). The morphology was analyzed by scanning electron microscopy (SEM), finding bar- and polyhedron-type geometries. Through transmission electron microscopy (TEM), we found particle sizes of 8.87-99.85 nm with an average of ~27.63 nm. Employing ultraviolet-visible (UV-Vis) spectroscopy, we found a band gap value of ~3.86 eV. Thick films made with MgSb2O6 powders were exposed to atmospheres containing 150, 300, 400, and 600 ppm of propane gas for dynamic testing. The time-dependent sensitivities were ~61.09, ~88.80, ~97.65, and ~112.81%. In addition, tests were carried out at different operating voltages (5-50 V), finding very short response and recovery times (~57.25 and ~18.45 s, respectively) at 50 V. The excellent dynamic response of the MgSb2O6 is attributed mainly to the synthesis method because it was possible to obtain nanometric-sized particles. Our results show that the trirutile-type oxide MgSb2O6 possesses the ability, efficiency, and thermal stability to be applied as a gas sensor for propane.

PEGylated mesoporous silica core–shell redox-responsive nanoparticles for delivering paclitaxel to breast cancer cells

Controlling the drug release and restricting its presence in healthy organs is extremely valuable. In this study, mesoporous silica nanoparticles (MSN) as the core, loaded with paclitaxel (PTX), were coated with a non-porous silica shell functionalized with disulfide bonds. The nanoparticles were further coated with polyethylene glycol (PEG) via disulfide linkages. We analyzed the physicochemical properties of nanoparticles, including hydrodynamic size via Dynamic Light Scattering (DLS), zeta potential, X-ray Diffraction (XRD) patterns, Fourier-Transform Infrared (FTIR) spectra, and imaging through Transmission Electron Microscopy (TEM) and Scanning Electron Microscopy (SEM). The drug release profile in two distinct glutathione (GSH) concentrations of 2 µM and 10 µM was measured. The cellular uptake of nanoparticles by MCF-7 cell line was determined using Confocal Laser Scanning Microscopy (CLSM) images and flow cytometry. Furthermore, the cell viability and the capability of nanoparticles to induce apoptosis in MCF-7 cell line were studied using the MTT assay and flow cytometry, respectively. Our investigations revealed that the release of PTX from the drug delivery system was redox-responsive. Also, results indicated an elevated level of cellular uptake and efficient induction of apoptosis, underscoring the promising potential of this redox-responsive drug delivery system for breast cancer therapy.

Optimisation Studies of Mesoporous Silica Nanoparticle as a Drug Carrier for Gemcitabine: Enhancing Therapeutic Effectiveness in Pancreatic Cancer

Pancreatic cancer, often referred to as “the silent killer”, presents with minimal or no symptoms in its early stages, leading to late detection when surgical resection is no longer the optimal treatment option. Gemcitabine (GEM), one of the leading chemotherapeutic drug for advanced stages of cancer, is a crucial treatment for pancreatic cancer. However, the low 5-year survival rate of pancreatic cancer patients highlight the limited effectiveness of current treatments. In recent years, mesoporous silica nanoparticles (MSNP) have garnered significant attention in both scholarly and pharmaceutical fields due to their unique combination of properties including stable porous structure and high loading capacities. This research aims to investigate the potential of MSNP as a carrier for anticancer drugs, specifically GEM. MSNP was successfully synthesized in the laboratory using sol-gel method with tetraethyl orthosilicate (TEOS) as silica source and cetyltrimethylammonium bromide (CTAB) as surfactant template. Comprehensive morphological and physical characterizations of the MSNP product were performed through transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) spectroscopy, element mapping, X-ray diffractometry (XRD), and accelerated surface area porosimetry (ASAP). The results demonstrate that MSNP exhibits desirable properties for drug loading, including a stable mesoporous structure with pore size of ~ 4.94 nm, a high surface area of about 278.32 m²/g, and average particle diameter of approximately 85 nm. The effects of incubation time and initial GEM concentrations were studied to determine the optimal drug loading parameters for the MSNP vehicle. The successful loading of up to 24 µg of GEM in 1 mg of MSNP achieved in an optimized incubation time of 2 hour, validates the tremendous potential of MSNP as a potential anticancer drug carrier in pancreatic cancer treatment. These findings provide a valuable reference for future research and investigations in this promising field.

Enhancing Benzo[a]pyrene Degradation by Pantoea dispersa MSC14 through Biostimulation with Sodium Gluconate: Insights into Mechanisms and Molecular Regulation.

We investigated biostimulation as an effective strategy for enhancing the degradation efficiency of recalcitrant organic compounds, with MSC14 (a novel polycyclic aromatic hydrocarbon degrading bacterium Pantoea dispersa MSC14) as the study material. Here, we investigated the impact of sodium gluconate on MSC14-mediated degradation of B[a]p. This study focused on the application of sodium gluconate, a biostimulant, on MSC14, targeting Benzo[a]pyrene (B[a]p) as the model pollutant. In this study, the novel PAHs-degrading bacterium P. dispersa MSC14 demonstrated the capability to degrade 24.41% of B[a]p after 4 days. The addition of the selected sodium gluconate stimulant at a concentration of 4 g/L stimulated MSC14 to degrade 54.85% of B[a]p after 16 h. Intermediate metabolites were analyzed using gas chromatography-mass spectrometry to infer the degradation pathway. The findings indicated that sodium gluconate promoted the intracellular transport of B[a]p by MSC14, along with the secretion of biosurfactants, enhancing emulsification and solubilization capabilities for improved B[a]p dissolution and degradation. Further analysis through transmission electron microscopy (TEM) and scanning electron microscopy (SEM) revealed the formation of a biofilm by MSC14 and an increase in flagella as a response to B[a]p stress. Transcriptome profiling elucidated the interplay of quorum sensing systems, chemotaxis systems, and flagellar systems in the degradation mechanism. Additionally, the study uncovered the molecular basis of B[a]p transport, degradation pathways, metabolic changes, and genetic regulation. In summary, the addition of sodium gluconate promotes the degradation of B[a]p by P. dispersa MSC14, offering the advantages of being rapid, efficient, and cost-effective. This research provides an economically viable approach for the remediation of petroleum hydrocarbon pollution, with broad potential applications.

Highly efficient supported bimetallic Au‐Pd catalysts for oxidative esterification of methacrolein to methyl methacrylate

AbstractAu‐Pd alloy particles supported on TiO2 were synthesized by the sol‐immobilized method and their confirmation was achieved through transmission electron microscope (TEM) and energy dispersive spectrometer (EDS) mapping. The samples were subjected to oxidative esterification of methacrolein with methanol to methyl methacrylate (MMA). Notably, a remarkable enhancement of catalytic performance was found in the presence of Pd. Among the samples tested, the sample Au0.25Pd0.75/TiO2 exhibited the highest catalytic performance. The interaction between Au and Pd demonstrated a synergistic effect, with Pd contributing to the stability of Au nanoparticles and strengthening the production of active oxygen species, which facilitated the efficient removal of hydrogen from intermediate hemiacetal. Furthermore, a probable reaction mechanism was proposed to explain these observations.

Effects of Co3C formation on the catalytic performance for Fischer-Tropsch synthesis over Co/SiO2 catalysts

Cobalt carbides demonstrate higher selectivity towards light olefins and alcohols in the Fischer-Tropsch synthesis (FTS). In this study, we present an investigation of a series of supported cobalt catalysts that were carburized with CO for different time. The presence of Co3CCo, Co and Co2CCo phases in these catalysts was confirmed through Transmission Electron Microscopy (TEM). The Co/SiO2-RC-0.5 h catalyst with both Co3C and Co structure exhibits the highest CO conversion for the FTS reaction. By utilizing the chemisorption techniques, we studied the structure-performance relationships between the phase and activity, and confirmed that Co3C has the highest intrinsic activity, which is beneficial for CO activation. This study provides further insight into the positive effects of Co3C on the FTS reaction and guides us in the rational design of high active Co-based FTS catalysts.

Ultrastructural and morphological studies on variables affecting Escherichia coli with selected commercial antibiotics

BackgroundMany studies reported the effects of antibiotic exposure on E. coli bacterial growth and cell modification. However, scarce descriptive information on ultrastructural effects upon exposure of commercial antibiotics. MethodsThis study described the morphological and ultrastructural alterations caused by selected antibiotics (amoxicillin-clavulanate, ceftriaxone, polymyxin B, colistin, gentamicin, and amikacin) that targeted cell wall, plasma membrane, and cytoplasmic density, and also proteins synthesis. We determined extracellular morphological changes of exposure through scanning electron microscopy (FESEM) and intracellular activities through transmission electron microscopy (TEM) investigation. ResultsFESEM and TEM micrograph of E. coli exposed with selected antibiotics shows ultrastructural changes in beta-lactam class (amoxicillin-clavulanate, ceftriaxone) elongated the cells as the cell wall was altered as it inhibits bacterial cell wall synthesis, polymyxin class (polymyxin B, colistin) had plasmid and curli-fimbriae as it breaking down the plasma/cytoplasmic membrane, and aminoglycoside class (gentamicin, and amikacin) reduced ribosome concentration as it inhibits bacterial protein synthesis by binding to 30 s ribosomes. ConclusionMorphological and ultrastructural alterations of E. coli’s mechanism of actions were translated and depicted. This study could be reference for characterization studies for morphological and ultrastructural of E. coli upon exposure to antimicrobial agents.

Biosynthesis and characterization of silver nanoparticles synthesized using extracts of Agrimonia eupatoria L. and in vitro and in vivo studies of potential medicinal applications.

This research explores the synthesis, characterization, and biological activities of silver nanoparticles (AgNPs) derived from acetone (AgNPs-acetone) and aqueous (AgNPs-H2O) extracts of Agrimonia eupatoria. The nanoparticles exhibit isometric morphology and uniform size distribution, as elucidated through Transmission Electron Microscopy (TEM) and high-resolution TEM (HRTEM) analyses. The utilization of Scanning Transmission Microscopy (STEM) with High-Angle Annular Dark-Field (HAADF) imaging and energy dispersive spectrometry (EDS) confirms the crystalline nature of AgNPs. Fourier Transform Infrared (FTIR) analysis reveals identical functional groups in the plant extracts and their corresponding AgNPs, suggesting the involvement of phytochemicals in the reduction of silver ions. Spectrophotometric monitoring of the synthesis process, influenced by various parameters, provides insights into the kinetics and optimal conditions for AgNP formation. The antioxidant activities of the plant extracts and synthesized AgNPs are evaluated through DPPH and ABTS methods, highlighting AgNPs-acetone as a potent antioxidant. Third-instar larvae exposed to the extracts have differential effects on DNA damage, with the acetone extract demonstrating antigenotoxic properties. Similarly, biosynthesized AgNPs-acetone displays antigenotoxic effects against EMS-induced DNA damage. The genotoxic effect of water extract and AgNPs-acetone was dose-dependent. Hemolytic potential is assessed on rat erythrocytes, revealing that low concentrations of AgNPs-acetone and AgNPs-H2O had a nontoxic effect on erythrocytes. Cytotoxicity assays demonstrate time-dependent and dose-dependent effects, with AgNPs-acetone exhibiting superior cytotoxicity. Proapoptotic activity is confirmed through apoptosis induction, emphasizing the potential therapeutic applications of AgNPs. The antimicrobial activity of AgNPs reveals concentration-dependent effects. AgNPs-H2O display better antibacterial activity, while antifungal activities are comparable between the two nanoparticle types.

Study on Quench Sensitivity during Isothermal Treatment of 7A65 Aluminum Alloy.

The quenching sensitivity of 7A65 aluminum alloy was investigated using interrupted quenching experiments. The time-temperature transformation (TTT) and time-temperature performance (TTP) curves of the alloy were determined. The results indicate that the nose temperature is about 320 °C and the quenching sensitivity temperature range is from 240 °C to 360 °C. During the isothermal treatment, the supersaturated solid solution resolves to the equilibrium phase of η (MgZn2), and the precipitation rate is the largest at about 320 °C. Through transmission electron microscope (TEM) observation and X-ray diffraction (XRD) tests, it was found that with the extension of the isothermal holding time, the originally dispersed η' phase gradually decreases until disappear, and the number of η phase increases and gradually grows up at the grain boundary or around the Al3Zr particles. The rod-like η phase at the grain boundary is distributed from discontinuous distribution to chain-like continuous distribution, and the precipitation free zone (PFZ) is gradually generated and widened as the holding time is extended. At the nose temperature, the driving force of nucleation is high, and the diffusion rate is fast, which promotes the precipitation and growth of η phases. The coarse η phase weakens the mechanical properties. According to the results, it is recommended to increase the cooling rate at the sensitivity temperature range to reduce the precipitation of the η phase and decrease the quenching cooling rate from solution temperature to 360 °C to reduce residual stresses in the components.

Tangzhiqing decoction attenuates cognitive dysfunction of mice with type 2 diabetes by regulating AMPK/mTOR autophagy signaling pathway

Ethnopharmacological relevanceTangzhiqing decoction (TZQD) is an effective prescription developed by Jiangsu Province Hospital of Chinese Medicine for the treatment of diabetes mellitus (DM) and its complications, which has a clear cerebral protective effect on mice with diabetic cognitive dysfunction, but its specific mechanism has not been well elucidated. Aims of the studyThis study aims to verify the protection of TZQD on cognitive function in mice with type 2 diabetes mellitus (T2DM) and explore the possible underlying mechanisms. Materials and methodsSix active ingredients in TZQD were detected using high-performance liquid chromatography analysis. In vivo experiments, the protection of TZQD on cognitive function and hippocampal neurons in type 2 diabetes mice was verified to obtain the optimal intervention dose of TZQD. TZQD and 3-methyladenine (3 MA) respectively or jointly intervened in mice with T2DM for 12 weeks, followed by detecting the cognitive difference, hippocampus cornu ammonis 1 (CA1) region injury, and hippocampal neuronal apoptosis in each group. Simultaneously, the investigation of autophagosome formation and organelle impairment in hippocampal neurons, along with the examination of AMPK/mTOR pathway proteins and autophagy-related proteins, was conducted to elucidate the potential mechanisms, through which TZQD modulates autophagy and enhances cognitive function. In vitro experiments, TZQD-containing serum and AMPK inhibitor Compound C (CC) were used to intervene in mouse hippocampal neuron HT22 cells under high glucose environment, further clarifying the regulatory role of TZQD on the AMPK/mTOR pathway and its impact on HT22 cell apoptosis and autophagy. ResultsIn vivo experiment results showed that TZQD had an obvious hypoglycemic effect. Different doses of TZQD could improve cognitive function and hippocampus damage in diabetes mice, with the middle dose of TZQD showing the best effect. TZQD increased the swimming speed of diabetes mice, improved their spatial recognition and memory ability, and reduced hippocampal neuronal apoptosis, Nissl body injury, and p-tau217 protein deposition. In addition, through transmission electron microscopy (TEM), immunofluorescence, and Western blot (WB) detection, TZQD significantly improved the organelle damage of hippocampal neurons in diabetes mice, promoted the formation of autophagy lysosomes, increased the expression of autophagy-related proteins like Beclin 1, LC3II/LC3I, LAMP1, and LAMP2, reduced the level of P62 and promoted autophagy flow, which, however, were all significantly weakened by 3 MA. Meanwhile, TZQD regulated the expressions of AMPK/mTOR pathway proteins. In vitro experimental study results showed that TZQD can regulate the expression ratio of p-AMPK/AMPK alpha 1 and p-mTOR/mTOR in HT22 cells under high glucose conditions and improved the morphology and vitality of HT22 cells. By employing techniques such as monodansylcadaverine (MDC) staining, Lysosomal red fluorescent probe staining, and Annexin V-FITC/PI double staining, the investigation revealed that TZQD administration resulted in enhanced autophagosome formation, preservation of a lysosomal acidic milieu, and consequent mitigation of HT22 cell apoptosis under high glucose conditions. ConclusionsTZQD can regulate the AMPK/mTOR pathway to activate autophagy to attenuate hippocampal neuronal apoptosis, thereby protecting cognitive function in diabetic mice.

Subendocardial “ischemic-like” state in patients with severe aortic stenosis: Insights from myocardial histopathology and ultrastructure

Myocardial adaptation to severe aortic stenosis (AS) is a complex process that involves myocardial fibrosis (MF) beyond cardiomyocyte hypertrophy. Perfusion impairment is believed to be involved in myocardial remodeling in chronic pressure overload. To describe morphological and ultrastructural myocardial changes at endomyocardial tissue sampling, possibly reflecting subendocardial ischemia, in a group of patients with severe AS referred to surgical aortic valve replacement (AVR), with no previous history of ischemic cardiomyopathy. One-hundred-fifty-eight patients (73 [68-77] years, 50% women) referred for surgical AVR because of severe symptomatic AS with preoperative clinical and imaging study and no previous history of ischemic cardiomyopathy. Intra-operative septal endomyocardial sampling was obtained in 129 patients. Tissue sections were stained with Masson´s Trichrome for MF quantification and periodic acid-Schiff (PAS) staining was performed to assess the presence of intracellular glycogen. Ultrastructure was analyzed through Transmission electron microscopy (TEM). MF totalized a median fraction of 11.90% (6.54-19.97%) of EMB, with highly prevalent perivascular involvement (95.3%). None of the samples had histological evidence of myocardial infarction. In 58 patients (45%) we found subendocardial groups of cardiomyocytes with cytoplasmatic enlargement, vacuolization and myofiber derangement, surrounded by extensive interstitial fibrosis. These cardiomyocytes were PAS positive, PAS-diastase resistant and Alcian Blue/PAS indicative of the presence of neutral intracellular glyco-saccharides. At TEM there were signs of cardiomyocyte degeneration with sarcomere disorganization and reduction, organelle rarefaction but no signs of intracellular specific accumulation. Almost half of the patients with severe AS referred for surgical AVR have histological and ultrastructural signs of subendocardial cardiomyocyte ischemic insult. It might be inferred that local perfusion imbalance contributes to myocardial remodeling and fibrosis in chronic pressure overload.

Electrospun Core-Sheath Nanofibers with a Cellulose Acetate Coating for the Synergistic Release of Zinc Ion and Drugs.

Precisely modulating the synergistic release behavior of multiple bioactive substances has emerged as a formidable challenge in recent years. In this work, we successfully prepared core-sheath nanofibers, where a thin cellulose acetate (CA) coating enrobed the core. Curcumin (Cur) was encapsulated in the core layer as a model drug, while zinc oxide (ZnO) nanoparticles were loaded on the sheath layer. The prepared fiber exhibited a straight cylindrical morphology containing nanoparticles, and the distinct core-sheath nanostructure was demonstrated through transmission electron microscopy (TEM). X-ray diffraction (XRD) and Fourier transform infrared (FTIR) were conducted to study the physical state and compatibility among CA, Cur, and ZnO. Drug release data indicated that core-sheath nanofibers were able to decelerate the rate of drug release, and the thickness of the sheath layer increased in the presence of ZnO particles. Most remarkably, these core-sheath nanofibers exhibited the remarkable ability to sustain the release of drugs and zinc ion (Zn2+), the two-day synergistically release behavior leading to a significant increase in cell proliferation. This material preparation strategy for the synergistic and controlled release of two bioactive substances is instructive for the exploration of innovative and versatile drug delivery systems.