Three-way Analysis Research Articles

Apically extruded debris evaluation with the use of ProTaper Ultimate and TruNatomy files systems with and without glider preparation in primary tooth.

Information regarding the influence of resorption and glide paths on debris extrusion in primary teeth is lacking. Therefore, we evaluated debris extrusion with and without resorption and with and without the use of a path file in primary molar teeth prepared with ProTaper Ultimate (PTU) Prime and TruNatomy (TRN) Prime rotary file systems. Forty resorbed and forty non-resorbed primary molar teeth were collected. Both groups were divided into four subgroups (n = 10). The Eppendorf tubes were weighed pre-debris. The distal canals of the teeth were prepared with PTU Prime and TRN Prime file systems, with and without the use of path files. The debris-filled tubes were weighed, and the weight of only the extruded debris was calculated by subtraction. The data were analyzed using a three-way analysis of variance (ANOVA) test. The presence of tooth resorption significantly increased debris extrusion, and the use of a path file significantly decreased debris extrusion (p < 0.001). The binary and ternary interactions of the three evaluated parameters among the groups showed no significant differences in terms of the amount of debris extruded (p > 0.05). While debris extrusion was observed in all groups, the use of a glide path file in primary teeth before the preparation process resulted in less debris extrusion.

Optic Nerve Head Morphological Variation in Craniosynostosis: A Cohort Study

To evaluate optic nerve head morphology in children with craniosynostosis versus healthy controls. Single-centre, prospective cohort study METHODS: Handheld optical coherence tomography (OCT) was performed in 110 eyes of 58 children (aged 0-13 years) with craniosynostosis. Inclusion criteria were as follows: normal intracranial pressure (ICP) on invasive overnight monitoring, or clinically stable ICP. The latter was defined as stable VA within 1 logMAR line and no papilloedema on fundoscopy for at least four months following OCT, and normal/stable visual evoked potentials. Control data for 218 eyes of 218 children were obtained from a published normative dataset. The main outcome measures were disc width, cup width, rim width and retinal nerve fibre layer (RNFL) thickness (nasal and temporal). Outcome measures were compared using three-way linear mixed model regression analysis (FGFR 1/2-associated craniosynostosis, non-FGFR 1/2-associated craniosynostosis, and controls). Out of 63 eligible children with craniosynostosis, handheld OCT imaging was successful in 110 eyes of 58 children (92%). Of these, 22 (38%) were female. Median subject age at OCT examination was 53 months (range: 2 to 157; IQR: 39 to 73). Twelve children (21%) had FGFR1/2-associated syndromes (Crouzon, n=6; Apert, n=4; Pfeiffer, n=2). Control data were available for 218 eyes of 218 healthy children. 122 controls (56%) were female. Median control age at OCT examination was 20 months (range: 0 to 163; IQR: 6 to 59). When comparing optic nerve head morphology in craniosynostosis (n=58) versus controls (n=218), disc width was 6% greater (p=0.001), temporal cup width was 13% smaller (p=0.027), rim width was 16% greater (p<0.001) and temporal RNFL was 11% smaller (p=0.027). When comparing FGFR1/2-associated syndromes (Crouzon, Apert and Pfeiffer syndromes, n=12) to the rest of the craniosynostosis group (n=46), disc width was 10% smaller (p=0.014) and temporal cup width was 38% smaller (p=0.044). This cohort demonstrated morphological differences of the optic nerve head in craniosynostosis, most markedly in Crouzon, Apert and Pfeiffer syndromes. These findings could help improve ophthalmological monitoring and surgical decision-making in children with craniosynostosis. Further work on longitudinal optic nerve head changes in syndromic and non-syndromic craniosynostosis would be valuable.

Clinical cut-off scores for the Borderline Personality Features Scale for Children to differentiate among adolescents with Borderline Personality Disorder, other psychopathology, and no psychopathology: a replication study

BackgroundDespite being one of the most popular measures of borderline pathology in adolescents, only one study has evaluated clinical cut-off scores for the Borderline Personality Features Scale for Children (BPFS-C) using a small sample without a healthy comparison group (Chang B, Sharp C, Ha C. The Criterion Validity of the Borderline Personality Features Scale for Children in an Adolescent Inpatient Setting. J Personal Disord. 2011;25(4):492–503. https://doi.org/10.1521/pedi.2011.25.4.492.). The purpose of the current study was to replicate and improve on the limitations of the prior study conducted by Chang et al. to more definitively establish clinical cut-off scores for the self- and parent-report versions of the BPFS-C to detect clinical and sub-clinical borderline personality disorder (BPD) in a large sample of adolescents with BPD, other psychopathology, and no psychopathology.MethodsA total of 900 adolescents ranging from ages 12–17 participated in this study. The clinical sample consisted of 622 adolescents recruited from an inpatient psychiatric facility, and the healthy control sample consisted of 278 adolescents recruited from the community. All participants completed the BPFS-C and were administered the Child Interview for DSM-IV Borderline Personality Disorder (CI-BPD).ResultsUsing three-way ROC analyses, cut-off scores on the self- and parent-report versions of the BPFS-C distinguishing adolescents with BPD from those with subclinical BPD, and those with subclinical BPD from healthy adolescents were established.ConclusionsThese findings support the use of both versions of the BPFS-C to detect adolescents with BPD and sub-clinical BPD.

When does entrepreneurial leadership enhance supply chain resilience? A three-way interaction analysis

PurposeThe research on entrepreneurial leadership (EL) and supply chain resilience (SCR) relationship is still in its exploration stage. Previous research indicates that EL is important for enhancing supply chain performance, including its resilience. However, the conditions through which EL affects SCR remain unclear. The purpose of this study is to examine the effect of EL on SCR in the context of SMEs, in addition to explore the combined moderating effects of big data analytics capability (BDAC) and environmental dynamism (ED) in the EL–SCR relationship.Design/methodology/approachHierarchical regression analysis via PROCESS Macro was used to analyze the data collected from manufacturing SMEs in India.FindingsThe findings reveal that EL positively and significantly affects SCR. Importantly, BDAC actually positively moderates the EL–SCR relationship regardless of the level of dynamism of the business environment.Originality/valueThis research expands the existing body of knowledge on EL and SCR within the context of developing countries. The findings offer useful insights for SME managers and decision-makers, who are anticipated to consider the adoption of BDAC in their firms. This has implications that with BDAC adoption, it is anticipated that SMEs will be able to take advantage of the full potential of EL to enhance their SCR regardless of the level of dynamism of the business environment.

Investigating Genetic Overlap between Alzheimer's Disease, Lipids, and Coronary Artery Disease: A Large-Scale Genome-Wide Cross Trait Analysis.

There is evidence to support a link between abnormal lipid metabolism and Alzheimer's disease (AD) risk. Similarly, observational studies suggest a comorbid relationship between AD and coronary artery disease (CAD). However, the intricate biological mechanisms of AD are poorly understood, and its relationship with lipids and CAD traits remains unresolved. Conflicting evidence further underscores the ongoing investigation into this research area. Here, we systematically assess the cross-trait genetic overlap of AD with 13 representative lipids (from eight classes) and seven CAD traits, leveraging robust analytical methods, well-powered large-scale genetic data, and rigorous replication testing. Our main analysis demonstrates a significant positive global genetic correlation of AD with triglycerides and all seven CAD traits assessed-angina pectoris, cardiac dysrhythmias, coronary arteriosclerosis, ischemic heart disease, myocardial infarction, non-specific chest pain, and coronary artery disease. Gene-level analyses largely reinforce these findings and highlight the genetic overlap between AD and three additional lipids: high-density lipoproteins (HDLs), low-density lipoproteins (LDLs), and total cholesterol. Moreover, we identify genome-wide significant genes (Fisher's combined p value [FCPgene] < 2.60 × 10-6) shared across AD, several lipids, and CAD traits, including WDR12, BAG6, HLA-DRA, PHB, ZNF652, APOE, APOC4, PVRL2, and TOMM40. Mendelian randomisation analysis found no evidence of a significant causal relationship between AD, lipids, and CAD traits. However, local genetic correlation analysis identifies several local pleiotropic hotspots contributing to the relationship of AD with lipids and CAD traits across chromosomes 6, 8, 17, and 19. Completing a three-way analysis, we confirm a strong genetic correlation between lipids and CAD traits-HDL and sphingomyelin demonstrate negative correlations, while LDL, triglycerides, and total cholesterol show positive correlations. These findings support genetic overlap between AD, specific lipids, and CAD traits, implicating shared but non-causal genetic susceptibility. The identified shared genes and pleiotropic hotspots are valuable targets for further investigation into AD and, potentially, its comorbidity with CAD traits.

Dosiomics-based detection of dose distribution variations in helical tomotherapy for prostate cancer patients: influence of treatment plan parameters.

The stability of dosiomics features (DFs) and dose-volume histogram (DVH) parameters for detecting disparities in helical tomotherapy planned dose distributions was assessed. Treatment plans of 18 prostate patients were recalculated using the followings: field width (WF) (2.5 vs. 5), pitch factor (PF) (0.433 vs. 0.444), and modulation factor (MF) (2.5 vs. 3). From each of the eight plans per patient, ninety-three original and 744 wavelet-based DFs were extracted, using 3D-Slicer software, across six regions including: target volume (PTV), pelvic lymph nodes (PTV-LN), PTV + PTV-LN (PTV-All), one cm rind around PTV-All (PTV-Ring), rectum, and bladder. For the resulting DFs and DVH parameters, the coefficient of variation (CV) was calculated, and using hierarchical clustering, the features were classified into low/high variability. The significance of parameters on instability was analyzed by a three-way analysis of variance. All DF's were stable in PTV, PTV-LN, and PTV-Ring (average CV ( ≤0.36). Only one feature in the bladder ( =0.9), rectum ( =0.4), and PTV-All ( =0.37) were considered unstable due to change in MF in the bladder and WF in the PTV-All. The value of for the wavelet features was much higher than that for the original features. Out of 225 unstable wavelet features, 84 features had ≥1. The CVs for all the DVHs remained very small ( <0.06). This study highlights that the sensitivity of DFs to changes in tomotherapy planning parameters is influenced by the region and the DFs, particularly wavelet features, surpassing the effectiveness of DVHs.

Immediate effect of different herbal solutions on tensile strength of suture materials in oral cavity

This pilot study evaluated the immediate effect of different herbal solutions in oral use on the tensile strength of the sutures used in oral surgical procedures. Three frequently used suture materials, polyglactin 910 (PGA), poliglecaprone (PGCL), and polypropylene (PP), were chosen in a 4-0-gauge size. The sutures' tensile stress was evaluated before being immersed (baseline) and after immersion at 24 h, 1 week, and 2 weeks in four different media: artificial saliva, chlorhexidine, Commiphora myrrh, and frankincense. The tensile strength was assessed by applying a 50 N load at a standardized speed of 2 mm/min. The data were analyzed using one-way and three-way analysis of variance (ANOVA) and the Tukey post hoc test with a significance level of p ≤ 0.05 significance level. The mean values of the maximum load showed a significant statistical difference across the three types of sutures (PGA, PGCL, and PP). The mean tensile strength of the PP suture was statistically lower than that of the other sutures. There was a statistically significant difference in the mean tensile strength of the PGA suture when stored in chlorohexidine media and the PGCL suture for frankincense media. The tensile strength for all sutures was the lowest value when immersed in Commiphora myrrh media. Home-prepared herbal solutions can affect the tensile strength and maximum load of suture materials. Careful and controlled use of herbal solutions after any dental surgical procedures is advisable.

Influence of various fabrication techniques and porcelain firing on the accuracy of metal-ceramic crowns

BackgroundThe fit of a metal-ceramic restoration is essential to its long-term durability. Regarding marginal and internal fit, there is not enough information about the technologies used in the production of metal-ceramic restorations. The aim of this in vitro study is to compare, both before and after porcelain firing, the marginal, axial, axio-occlusal, and occlusal fit of metal-ceramic restorations manufactured using casting, additive or subtractive computer-aided design, and computer-aided manufacturing techniques (CAD/CAM).MethodsCAD/CAM were used to create 50 prepared maxillary first molar-shaped Co-Cr die models, which were randomly divided into 5 groups (n = 10). Cobalt-chrome copings were produced by casting (C), hard metal milling (HM), soft metal milling (SM), selective laser melting (SLM), and selective laser sintering (SLS) techniques. Before and after porcelain firing, discrepancies of the copings were measured using the silicone replica technique. The data obtained by measurements with a stereomicroscope at x80 magnification were analyzed statistically in the SPSS program. The ROBUST three-way analysis of variance (ANOVA) method was used to compare the discrepancy values.ResultsThere were statistically significant differences among fabrication methods (P < .001). The HM method showed the highest discrepancy (90.1 μm), and the C (63 μm) method showed the lowest discrepancy in terms of the die model- crown fit. The C, SLS, and SM methods (63 μm; 61.6 μm; 67.7 μm) were statistically similar (P > .001). The highest discrepancy was observed on the occlusal area (87.1 μm), and the lowest discrepancy was observed on the axial area (47.7 μm) of the coping. Porcelain firing had a decrease in the discrepancy values (P = .001).ConclusionAll CAD/CAM techniques are appropriate for clinical use; selective laser sintering and soft milling can be the more recommended methods for the compatibility of metal-porcelain restorations, as they have lower discrepancy values than the SLM and HM methods.

A study on the effectiveness of narrative image types, message framing, and psychological distance in enhancing young people's self-efficacy in marine garbage recycling

Intentional or unintentional littering, especially among young people, poses a threat to the marine environment. It is, therefore, necessary to enhance awareness of marine environmental protection among youth groups. This study explored the interaction between visual image types (photograph vs. cartoon), message framing (positive vs. negative), and psychological distance (human vs. turtle). A three-way analysis of variance (ANOVA) and regression analysis were used to verify the hypotheses. The key findings of the research were as follows: (1) Among the eight information construction methods, cartoons combined with turtles and presented with positive outcomes were the best way to communicate, i.e., cartoons showing animals in a friendly and positive way were the most effective form of marine garbage recycling for young people, and (2) Young people's preference for information will promote their self-efficacy in marine garbage recycling. The implications of these findings for developing marine protection information communication education for youth groups are also proposed.

Trisection-fusion and fusion-trisection methods of three-way conflict analysis with Pythagorean fuzzy information

A basic task of Pawlak conflict analysis is to cluster agents based on their attitudes towards various issues. When ratings of agents are imprecise and uncertain, for example, as represented by a Pythagorean fuzzy situation table, single-measure based methods fall short in ensuring the accuracy of agent clusters. Multi-measure based conflict analysis methods are more effective for generating higher-quality agent clusters. The objective of this paper is to propose two new multi-measure based methods under uncertainty represented by Pythagorean fuzzy sets. We introduce three distinct conflict measures regarding an issue by leveraging the maximum positive and negative agents. The first measure is based on support degrees, the second measure incorporates opposition degrees, and the third measure considers both support and opposition degrees. These measures trisect a set of agents into three disjoint coalitions concerning an individual issue. For multiple issues, we propose two models by combing the two fundamental tasks, namely, trisection and fusion. A trisection-fusion model amalgamates a family of trisections generated from multiple issues based on conflict measures regarding single issues. Matrix representations of trisections are provided, and trisection fusions are transformed into a series of matrix operations. A fusion-trisection model trisects the set of agents according to fused conflict measures on multiple issues. To demonstrate the value of the two models, we apply them in assisting decision-makers in Hunan Province, China, to adjust development plans. The experimental results show that multi-measure based models offer decision-makers more comprehensive guidance.

Attentional Bias for Opioids in Taiwanese Heavy Smokers with Chronic Noncancer Pain.

Background and Objectives: Attentional bias (AB) for addictive substances is a feature of attention found in individuals with substance misuse or diagnosed with substance use disorders. When AB exists, the attention of the addicted individual may be quickly oriented to cues related to the addictive substance or be maintained on these cues for a longer time. AB toward opioids was found in Western samples of smokers with chronic noncancer pain. The level of AB was dose-responsive. However, similar studies in the Taiwanese population are lacking. This study compared the patterns of AB for opioid analgesics in Taiwanese participants with chronic noncancer pain to that of individuals without pain. This study aimed to investigate if AB toward opioids is presented in Taiwanese heavy smokers who are on long-term opioid therapy for pain control. Materials and Methods: Participants were grouped into chronic noncancer pain smokers, chronic pain nonsmokers, and smokers without pain, according to smoking habits and whether or not on long-term opioid therapy for pain control. Each participant completed demographic questionnaires, mood scales, and the opioid-related visual probe task. Differences in AB among the groups were compared using a three-way analysis of covariance controlling for daily cigarette consumption. Results: Chronic noncancer pain smokers (n = 17) and chronic pain nonsmokers (n = 16) displayed more severe levels of depression, anxiety, and pain, compared to smokers without pain (n = 28). Only did chronic pain nonsmokers show significant AB for opioid cues that were displayed for a short time. Analysis on reaction time found that smokers without pain consistently responded faster to the tasks. No difference in reaction time was found between the pain groups. Conclusions: The current study did not fully replicate findings from studies that were based in Western countries. Formulary availability and regulatory limitations might have affected patient's perception of prescription opioids in Taiwan. However, chronic pain nonsmokers exhibited initial orientation toward opioid-related cues when daily cigarette consumption was accounted for. According to previous research, this AB for shortly displayed opioid cues can be associated with the expectation of pain relief. The current finding also indicated general psychomotor retardation in individuals who were on long-term use of opioids.

Construction projects: interactions of the causes of delays

PurposeThis review paper aims to highlight the causes of delays (COD) and their interactions in construction projects, potentially aiding in timely completion and waste reduction through early anticipation.Design/methodology/approachForty-seven global literature were examined in detail to identify CODS and its interactions using the systematic literature review (SLR) method that utilised the PRISMA guidelines to ensure the studies reviewed were adequate to safeguard the robustness and comprehensiveness. Three-way analysis, such as Pareto, degree of centrality and loops, was undertaken to identify the critical Level 1,2 and 3 CODS that affect the Construction projects.FindingsThe research findings demonstrate that 65 CODs in eight categories affect construction projects. The CODs act in coherence rather than silos; the CLD displays complex interconnections of 44 factors obtained through the pairwise comparison of the 47 identified literature of the SLR. Through its systematic analysis of interaction loops, this research identified Ten level 1 critical CODs, two second-level critical CODs and 4 Third-level critical CODs. “Contractors' excessive workload/beyond potential/inadequate experience” emerged as the top COD that affects scheduling and project delay.Research limitations/implicationsThe study limitations include using only English articles and a restricted number of databases. However, the chosen databases were reputable and underwent thorough peer review processes. This study may have limitations due to the SLR, which means that factors affecting COD and interactions may vary by country, and future research is suggested for validation.Practical implicationsThis study identified interactions of construction delays that potentially support scheduling risk management during the early stage of the project and reduce waste to improve sustainability. The theoretical implications of SLR-based research include helping develop a framework that would potentially have all COD in the current scenario and aid future academic and industrial research factor-wise and country-wise in aiding sustainability. This will support and provide construction professionals and academia with knowledge of the COD related to factors and their interactions to be considered in the early assessment and management of future projects and improve sustainability.Originality/valueMost literature studies the factors or causes of construction delays that affect construction projects. The CODs primarily do not operate in silos but combine with other causes to enhance their influence on delays. Hence, it is of utmost importance to study the interactions of COD to enhance the knowledge in the construction field that would aid in schedule repair and, in turn, on-time project delivery. The study is the first related to COD and their interactions in construction projects in the digital era.

Instrumental and Visual Evaluation of the Chameleon Effect of Single-shaded Composite Resins.

To evaluate the shade-matching ability of single-shade resin-based composite restorations in different thicknesses using both instrumental and visual techniques. Cavities with 4 mm diameter and 2 mm (n=96) or 3 mm (n=96) depth were prepared in acrylic incisor teeth of shades A2, A3, B3, and C2 and restored with three single-shade resin composites, Omnichroma (Tokuyama Dental America, Encinitas, CA, USA [OM]), Vittra APS Unique (FGM Dental Group, Joinville, SC, Brazil [VU]), Zenchroma (President Dental, Allershausen, Germany [ZC]), and a microhybrid resin composite (Filtek 3M Z250 3M ESPE, St Paul, MN, USA [FZ]) of A2, A3, B3, and C2 shades. Readings were obtained using VITA Easyshade V spectrophotometer for the teeth and restorations. The CIEDE2000 (ΔE00) color difference formula was used, and the values were assessed using three-way analysis of variance (ANOVA). Forty-eight evaluators graded the shade match of 32 different specimens visually as (A) best shade match, (B) intermediate shade match, and (C) poor shade match. FZ material achieved satisfactory matches for both thicknesses, across all shades, and OM material demonstrated statistically significant lower shade matches than the ZC and the FZ materials (p<0.05). VU exhibited poor shade match with the highest ΔE00 value on C2 shade. According to the visual examination, the best shade matches were observed for FZ on A3-shade and ZC on C2-shade teeth. Shade matching for 2 mm and 3 mm-thick composite resin restorations is material- and tooth-shade dependent.

CSR, Digital Transformation, and Internal Control: Three-Way Interaction Effect on the Firm Value of Chinese Listed Companies

CSR has become a key issue for the qualitative growth of the Chinese economy, while digital transformation has emerged as a crucial strategy for enhancing company competitiveness. Thus, the complex impact of CSR and digital transformation on the firm value is an important research topic. This study analyzes the moderating effect of digital transformation and the three-way interaction effect of internal control on the CSR–firm value relationship. A hierarchical multiple regression analysis of Chinese listed companies shows a significant positive relationship between CSR and the firm value and a positive moderating effect of digital transformation on the CSR–firm value relationship. According to the three-way interaction analysis results, internal control strengthens the moderating effect of digital transformation, which strengthens the positive relationship between CSR and the firm value. This study has academic value as the first to present and empirically analyze a research model on the complementary effects of CSR, DT, and internal control on the firm value. It also presents corporate strategies to respond to changes in the business environment and provides political implications for promoting corporate and social development together.

Effects of Muscular Fatigue on Position Sense in Two Phases of the Menstrual Cycle.

It is generally accepted that local muscular fatigue can negatively affect position sense. Interestingly, it has been proposed that in women, position sense and neuromuscular coordination may be affected by fluctuations of estrogen and progesterone levels. The aim of this study was to examine the possible effect of localized muscle fatigue on knee joint position sense at two phases of the menses: follicular and luteal. Twenty physically active females aged 19-30 years, with normal menses, volunteered for this study. An isokinetic dynamometer was used to evaluate proprioception and perform the fatigue protocol of the knee extensors and flexors. Knee proprioception at rest and after fatigue at three knee target angles (30°, 45°, 60°) was measured. A three-way ANOVA analysis with repeated measures was performed. The results showed that the main effect of fatigue was significant, but no main effect of the menstrual cycle phase was found. Additionally, a main effect was found for the target angle (more flexed target knee joint angles were associated with larger angular error deviations). In conclusion, localized muscle fatigue can significantly reduce the accuracy of active knee joint repositioning in both the luteal and the follicular menstrual phases in young, physically active healthy women.

Real-world outcomes of lobectomy, segmentectomy and wedge resection for the treatment of stage c-IA lung carcinoma.

To determine safety and survival outcomes associated with lobectomy, segmentectomy and wedge resection for early-stage lung cancer by quiring the French population-based registry EPIdemiology in THORacic surgery (EPITHOR). Retrospective analysis of 19 452 patients with stage c IA lung carcinoma who underwent lobectomy, segmentectomy or wedge resection between 2016 and 2022 with curative-intent. Main outcome measures were 90-day mortality and 5-year overall survival estimates. Proportional hazards regression and propensity score matching were used to adjust outcomes for key patient, tumour and practice environment factors. The treatment distribution was 72.2% for lobectomy, 21.5% for segmentectomy and 6.3% for wedge. Unadjusted 90-day mortality rates were 1.6%, 1.2% and 1.1%, respectively (P = 0.10). Unadjusted 5-year overall survival estimates were 80%, 78% and 70%, with significant inter-group survival curves differences (P < 0.0001). Multivariable proportional hazards regression showed that wedge was associated with worse overall survival [adjusted hazard ratio (AHR), 1.23 (95% confidence interval 1.03-1.47); P = 0.021] compared with lobectomy, while no significant difference was disclosed when comparing segmentectomy to lobectomy (1.08 [0.97-1.20]; P = 0.162). The three-way propensity score analyses confirmed similar 90-day mortality rate for wedge resection and segmentectomy compared with lobectomy (hazard ratio: 0.43; 95% confidence interval 0.16-1.11; P = 0.081 and 0.99; 0.48-2.10; P = 0.998, respectively), but poorer overall survival (1.45; 1.13-1.86; P = 0.003 and 1.31; 1-1.71; P = 0.048, respectively). Wedge resection was associated with comparable 90-day mortality but lower overall survival when compared to lobectomy. Overall, all types of sublobar resections may not offer equivalent oncologic effectiveness in real-world settings.

GABA-edited MEGA-PRESS at 3 T: Does a measured macromolecule background improve linear combination modeling?

The J-difference edited γ-aminobutyric acid (GABA) signal is contaminated by other co-edited signals-the largest of which originates from co-edited macromolecules (MMs)-and is consequently often reported as "GABA+." MM signals are broader and less well-characterized than the metabolites, and are commonly approximated using a Gaussian model parameterization. Experimentally measured MM signals are a consensus-recommended alternative to parameterized modeling; however, they are relatively under-studied in the context of edited MRS. To address this limitation in the literature, we have acquired GABA-edited MEGA-PRESS data with pre-inversion to null metabolite signals in 13 healthy controls. An experimental MM basis function was derived from the mean across subjects. We further derived a new parameterization of the MM signals from the experimental data, using multiple Gaussians to accurately represent their observed asymmetry. The previous single-Gaussian parameterization, mean experimental MM spectrum and new multi-Gaussian parameterization were compared in a three-way analysis of a public MEGA-PRESS dataset of 61 healthy participants. Both the experimental MMs and the multi-Gaussian parameterization exhibited reduced fit residuals compared to the single-Gaussian approach (p = 0.034 and p = 0.031, respectively), suggesting they better represent the underlying data than the single-Gaussian parameterization. Furthermore, both experimentally derived models estimated larger MM fractional contribution to the GABA+ signal for the experimental MMs (58%) and multi-Gaussian parameterization (58%), compared to the single-Gaussian approach (50%). Our results indicate that single-Gaussian parameterization of edited MM signals is insufficient and that both experimentally derived GABA+ spectra and their parameterized replicas improve the modeling of GABA+ spectra.

The impact of history of depression and access to weapons on suicide risk assessment: a comparison of ChatGPT-3.5 and ChatGPT-4.

The aim of this study was to evaluate the effectiveness of ChatGPT-3.5 and ChatGPT-4 in incorporating critical risk factors, namely history of depression and access to weapons, into suicide risk assessments. Both models assessed suicide risk using scenarios that featured individuals with and without a history of depression and access to weapons. The models estimated the likelihood of suicidal thoughts, suicide attempts, serious suicide attempts, and suicide-related mortality on a Likert scale. A multivariate three-way ANOVA analysis with Bonferroni post hoc tests was conducted to examine the impact of the forementioned independent factors (history of depression and access to weapons) on these outcome variables. Both models identified history of depression as a significant suicide risk factor. ChatGPT-4 demonstrated a more nuanced understanding of the relationship between depression, access to weapons, and suicide risk. In contrast, ChatGPT-3.5 displayed limited insight into this complex relationship. ChatGPT-4 consistently assigned higher severity ratings to suicide-related variables than did ChatGPT-3.5. The study highlights the potential of these two models, particularly ChatGPT-4, to enhance suicide risk assessment by considering complex risk factors.

CSR perceptions, meaningful work and innovative behaviors: the moderated mediation effects of co-worker instrumental and emotional support

PurposeThis study examines the role of meaningful work in mediating the relationship between employees’ perceptions of corporate social responsibility (CSR) and innovative behavior. This study further examines how co-worker support, both instrumental and emotional, moderates the meaningful work–innovative behavior relationship.Design/methodology/approachUtilizing survey data from 355 employees in South Korea with a two-wave longitudinal design, path modeling with the M-plus PROCESS macro was performed to analyze the mediation and second-stage moderated mediation effects.FindingsThe results showed that the relationship between employee CSR perceptions and innovative behavior was mediated by meaningful work. Co-worker instrumental support strengthened the meaningful work–innovative behavior relationship, whereas co-worker emotional support had no significant moderating effect. The three-way interaction analysis indicated that the meaningful work–innovative behavior relationship was weakest when co-worker instrumental support was low. Additionally, instrumental support by co-workers moderated the indirect effect of CSR perceptions on innovative behavior via meaningful work.Originality/valueThis research contributes to the literature on CSR perceptions and meaningful work. Our focus on meaningful work as a key psychological mechanism provides insights into how and why employee CSR perceptions promote desirable outcomes including innovative behavior, an underexplored yet important outcome. Furthermore, by identifying co-worker instrumental support as a significant boundary condition, this study contributes to a more nuanced understanding of the social context that promotes innovative behavior.

Viral load in hospitalized infants with respiratory syncytial virus bronchiolitis: a three-way comparative analysis.

Viral load measurement ofRespiratory syncytial virus (RSV) in acute bronchiolitis depends on specimen collection, viral load quantification, and transport media.The aim of this study wasto investigate viral load in three-way-comparative analyses; nasal swab versus nasal wash, quantitative real-time polymerase chain reaction (RT-PCR) versus cell tissue culture, and various transport media.A prospective cohort study of infants aged < 12 months, admitted to the Soroka Medical Center, due to acute bronchiolitis, was conducted. Two nasal swabs and two nasal wash samples (in UTM and VCM) were collected from each infant upon admission and after 48h. Samples were immediately stored at -80 °C and tested at Viroclinics DDL (Rotterdam, Netherlands). Quantitative RT-PCR and quantitative virus culture were performed using tissue culture infective dose (TCID50). Spearman's correlation coefficient test assessed the correlation between the different methods, viral load, and clinical severity score. One hundred samples were collected from 13 infants (mean age 5.7 ± 3.8 months, 46% males). Twelve patients were RSV-A positive, and one was RSV-B positive. A high correlation was found between transport media- UTM and VCM (0.92, P < 0.001) and between nasal swabs and nasal wash samples (0.62, P = 0.02). RSV signals were higher in nasal wash than in swabs. PCR signals were lower in the second collection compared to the first. No correlation was found between viral load and clinical severity. Conclusion: RSV viral load is comparable across nasal wash, nasal swabs, and various transport media. However, it did not correlate with clinical severity, probably due to the limited sample size. Broader analyses are warranted. What is Known: • Viral load measurement in Respiratory Syncytial Virus (RSV) bronchiolitis depends on specimen collection, viral load quantification, and transport media. • The COVID-19 pandemic underscored the paramount significance of proper specimen collection, notably through nasal swabs. What is New: • RSV viral load was investigated in three-way-comparative analyses. • RSV viral load correlated well across PCR and tissue culture, nasal wash and swabs, and various transport media.RSV viral load did not correlate with clinical severity.