Three-dimensional Visualization Technology Research Articles

Three-dimensional visualization technology for guiding one-step percutaneous transhepatic cholangioscopic lithotripsy for the treatment of complex hepatolithiasis.

Biliary stone disease is a highly prevalent condition and a leading cause of hospitalization worldwide. Hepatolithiasis with associated strictures has high residual and recurrence rates after traditional multisession percutaneous transhepatic cholangioscopic lithotripsy (PTCSL). To study one-step PTCSL using the percutaneous transhepatic one-step biliary fistulation (PTOBF) technique guided by three-dimensional (3D) visualization. This was a retrospective, single-center study analyzing, 140 patients who, between October 2016 and October 2023, underwent one-step PTCSL for hepatolithiasis. The patients were divided into two groups: The 3D-PTOBF group and the PTOBF group. Stone clearance on choledochoscopy, complications, and long-term clearance and recurrence rates were assessed. Age, total bilirubin, direct bilirubin, Child-Pugh class, and stone location were similar between the 2 groups, but there was a significant difference in bile duct strictures, with biliary strictures more common in the 3D-PTOBF group (P = 0.001). The median follow-up time was 55.0 (55.0, 512.0) days. The immediate stone clearance ratio (88.6% vs 27.1%, P = 0.000) and stricture resolution ratio (97.1% vs 78.6%, P = 0.001) in the 3D-PTOBF group were significantly greater than those in the PTOBF group. Postoperative complication (8.6% vs 41.4%, P = 0.000) and stone recurrence rates (7.1% vs 38.6%, P = 0.000) were significantly lower in the 3D-PTOBF group. Three-dimensional visualization helps make one-step PTCSL a safe, effective, and promising treatment for patients with complicated primary hepatolithiasis. The perioperative and long-term outcomes are satisfactory for patients with complicated primary hepatolithiasis. This minimally invasive method has the potential to be used as a substitute for hepatobiliary surgery.

Chip-scale integrated holographic devices based on top-emitting vertical cavity surface emitting lasers.

Holography technology is considered the ultimate three-dimensional (3D) visualization technology in the future. However, conventional methods for achieving holography generally utilize discrete optical components and off-chip laser sources, resulting in a large size and high complexity, which are undesirable for practical applications. In this Letter, chip-scale integrated holographic devices are realized by integrating top-emitting vertical cavity surface emitting lasers (VCSELs) with micro holograms printed by 3D femtosecond laser nanoprinting technology. The VCSELs are designed to operate in a single fundamental mode with a Gaussian emission profile. Then the Gaussian beams are phase-modulated by the integrated micro holograms designed by the Gerchberg-Saxton (GS) algorithm and the target holographic images can be displayed behind the holograms. Such integrated holographic devices are of micron size and can be easily scaled into arrays with arbitrary channels on-demand, which are important for achieving miniaturized and portable holographic imaging systems.

An unsupervised learning model based on CT radiomics features accurately predicts axillary lymph node metastasis in breast cancer patients: diagnostic study.

The accuracy of traditional clinical methods for assessing the metastatic status of axillary lymph nodes (ALNs) is unsatisfactory. In this study, the authors propose the use of radiomic technology and three-dimensional (3D) visualization technology to develop an unsupervised learning model for predicting axillary lymph node metastasis in patients with breast cancer (BC), aiming to provide a new method for clinical axillary lymph node assessment in patients with this disease. In this study, we retrospectively analyzed the data of 350 patients with invasive BC who underwent lung-enhanced computed tomography (CT) and axillary lymph node dissection surgery at the Department of Breast Surgery of the Second Xiangya Hospital of Central South University. The authors used 3D visualization technology to create a 3D atlas of ALNs and identified the region of interest for the lymph nodes. Radiomic features were subsequently extracted and selected, and a prediction model for ALNs was constructed using the K-means unsupervised algorithm. To validate the model, the authors prospectively collected data from 128 BC patients who were clinically evaluated as negative at our center. Using 3D visualization technology, we extracted and selected a total of 36 CT radiomics features. The unsupervised learning model categorized 1737 unlabeled lymph nodes into two groups, and the analysis of the radiomic features between these groups indicated potential differences in lymph node status. Further validation with 1397 labeled lymph nodes demonstrated that the model had good predictive ability for axillary lymph node status, with an area under the curve of 0.847 (0.825-0.869). Additionally, the model's excellent predictive performance was confirmed in the 128 axillary clinical assessment negative cohort (cN0) and the 350 clinical assessment positive (cN+) cohort, for which the correct classification rates were 86.72 and 87.43%, respectively, which were significantly greater than those of clinical assessment methods. The authors created an unsupervised learning model that accurately predicts the status of ALNs. This approach offers a novel solution for the precise assessment of ALNs in patients with BC.

Evaluating the use of three-dimensional reconstruction visualization technology for precise laparoscopic resection in gastroesophageal junction cancer.

Laparoscopic gastrectomy for esophagogastric junction (EGJ) carcinoma enables the removal of the carcinoma at the junction between the stomach and esophagus while preserving the gastric function, thereby providing patients with better treatment outcomes and quality of life. Nonetheless, this surgical technique also presents some challenges and limitations. Therefore, three-dimensional reconstruction visualization technology (3D RVT) has been introduced into the procedure, providing doctors with more comprehensive and intuitive anatomical information that helps with surgical planning, navigation, and outcome evaluation. To discuss the application and advantages of 3D RVT in precise laparoscopic resection of EGJ carcinomas. Data were obtained from the electronic or paper-based medical records at The First Affiliated Hospital of Hebei North University from January 2020 to June 2022. A total of 120 patients diagnosed with EGJ carcinoma were included in the study. Of these, 68 underwent laparoscopic resection after computed tomography (CT)-enhanced scanning and were categorized into the 2D group, whereas 52 underwent laparoscopic resection after CT-enhanced scanning and 3D RVT and were categorized into the 3D group. This study had two outcome measures: the deviation between tumor-related factors (such as maximum tumor diameter and infiltration length) in 3D RVT and clinical reality, and surgical outcome indicators (such as operative time, intraoperative blood loss, number of lymph node dissections, R0 resection rate, postoperative hospital stay, postoperative gas discharge time, drainage tube removal time, and related complications) between the 2D and 3D groups. Among patients included in the 3D group, 27 had a maximum tumor diameter of less than 3 cm, whereas 25 had a diameter of 3 cm or more. In actual surgical observations, 24 had a diameter of less than 3 cm, whereas 28 had a diameter of 3 cm or more. The findings were consistent between the two methods (χ2 = 0.346, P = 0.556), with a kappa consistency coefficient of 0.808. With respect to infiltration length, in the 3D group, 23 patients had a length of less than 5 cm, whereas 29 had a length of 5 cm or more. In actual surgical observations, 20 cases had a length of less than 5 cm, whereas 32 had a length of 5 cm or more. The findings were consistent between the two methods (χ2 = 0.357, P = 0.550), with a kappa consistency coefficient of 0.486. Pearson correlation analysis showed that the maximum tumor diameter and infiltration length measured using 3D RVT were positively correlated with clinical observations during surgery (r = 0.814 and 0.490, both P < 0.05). The 3D group had a shorter operative time (157.02 ± 8.38 vs 183.16 ± 23.87), less intraoperative blood loss (83.65 ± 14.22 vs 110.94 ± 22.05), and higher number of lymph node dissections (28.98 ± 2.82 vs 23.56 ± 2.77) and R0 resection rate (80.77% vs 61.64%) than the 2D group. Furthermore, the 3D group had shorter hospital stay [8 (8, 9) vs 13 (14, 16)], time to gas passage [3 (3, 4) vs 4 (5, 5)], and drainage tube removal time [4 (4, 5) vs 6 (6, 7)] than the 2D group. The complication rate was lower in the 3D group (11.54%) than in the 2D group (26.47%) (χ2 = 4.106, P < 0.05). Using 3D RVT, doctors can gain a more comprehensive and intuitive understanding of the anatomy and related lesions of EGJ carcinomas, thus enabling more accurate surgical planning.

Research on 3D Human Motion Visualization for Immersive Teaching Mechanism - 3D Pose Reconstruction form the Tradition Motion Video for Teaching and Evaluation

Objective: Based on the three-dimensional (3D) visualization technology of human motion, the immersive teaching mechanism of human motion was proposed. At present, the training and learning of human motion could not observe the 3D information of its posture due to the issue of two-dimensional (2D) perspective, which had many shortcomings. Methods: This article proposed new teaching mechanisms, including personal immersive assisted instruction, multi person immersive interactive teaching, and immersive teaching evaluation method for motion learning. The design of the three methods were carried out in the background of artificial intelligence (AI). Results: Combining with current advanced AI algorithms, the concept of visualizing 3D human motion for immersive teaching method was conceived, and a specific implementation framework diagram and description of the main work of each teaching mechanism are provided. The personal immersive assisted instruction method would be a powerful tool for enhancing individual learning experiences in the realm of 3D human motion visualization. The multi-person immersive interactive teaching took 3D human motion visualization to the next level by facilitating collaborative learning experiences. The immersive teaching evaluation method for human motion training was pivotal for assessing the effectiveness of these immersive techniques. Conclusion: After the evaluation and analysis, this mechanism had been proven to be an effective teaching mechanism for pose learning. 3D human motion visualization for the immersive teaching held the promising prospects in the field of education and instructional practices.

Efficacy of hepatectomy for hepatolithiasis using 3D visualization combined with ICG fluorescence imaging: A retrospective cohort study.

Hepatolithiasis is a complex condition that poses challenges and difficulties in surgical treatment. Three-dimensional visualization technology combined with fluorescence imaging (3DVT-FI) enables accurate preoperative assessment and real-time intraoperative navigation. However, the perioperative outcomes of 3DVT-FI in hepatolithiasis have not been reported. We aim to evaluate the efficacy of 3DVT-FI in the treatment of hepatolithiasis. A retrospective analysis was performed on 128 patients who underwent hepatectomy for hepatolithiasis at the Department of Hepatobiliary Surgery, Zhujiang Hospital, between January 2017 and December 2022. Among them, 50 patients underwent hepatectomy using 3DVT-FI (3DVT-FI group), while 78 patients underwent conventional hepatectomy without 3DVT-FI (CH group). The operative data, postoperative liver function indices, complication rates and stone residue were compared between the two groups. There were no significant differences in preoperative baseline data between the two groups (p>0.05). Compared with the CH group, the 3DVT-FI group exhibited lower intraoperative blood loss (140.00±112.12 vs. 225.99±186.50mL, p=0.001), and a lower intraoperative transfusion rate (8.0% vs. 23.1%, p=0.027). The overall incidence of postoperative complications did not differ significantly (22.0% vs. 35.9%, p=0.096). The 3DVT-FI group was associated with a lower immediate residual stone rate (16.0% vs. 34.6%, p=0.021). There were no perioperative deaths in the 3DVT-FI group, while one perioperative death occurred in the CH group. The 3DVT-FI may offer significant benefits in terms of surgical safety, reduced intraoperative bleeding and decreased stone residue during hepatectomy for hepatolithiasis.

Spatial distribution pattern of local tumor progression analysis after microwave ablation of hepatocellular carcinoma based on three-dimensional magnetic resonance imaging

Objective: To investigate the spatial distribution pattern of local tumor progression (LTP) for hepatocellular carcinoma (HCC) ≤5 cm after microwave ablation. Methods: A retrospective analysis was performed on 169 HCCs with matched MRI before and after ablation from December 2009 to December 2019. A tumor MRI was reconstructed using three-dimensional visualization technology. LTP was classified as contact or non-contact, early or late stage, according to whether LTP was in contact with the edge of the ablation zone and the occurrence time (24 months). The tumor-surrounded area was divided into eight quadrants by using the eight-quadrant map method. An analysis was conducted on the spatial correlation between the quadrant where the ablative margin (AM) safety boundary was located and the quadrant where different types of LTP occurred. The t-test, or rank-sum test, was used for the measurement data. 2-test for count data was used to compare the difference between the two groups. Results: The AM quadrant had a distribution of 54.4% LTP, 64.2% early LTP stage, and 69.1% contact LTP, suggesting this quadrant was much more concentrated than the other quadrants (P < 0.001). Additionally, the AM quadrant had only 15.2% of non-contact type LTP and 17.1% of late LTP, which was not significantly different from the average distribution probability of 12.5% (100/8%) among the eight quadrants (P = 0.667, 0.743). 46.6% of early contact type LTP was located at the ablation needle tip, 25.2% at the body, and 28.1% at the caudal, while the location distribution probabilities of non-early contact LTP were 34.8%, 31.8%, and 33.3%, respectively. Conclusion: LTP mostly occurs in areas where the ablation safety boundary is the shortest. However, non-contact LTP and late LTP stages exhibit the feature of uniform distribution. Thus, this type of LPT may result from an inadequate non-ablation safety boundary.

Comparing the impact of three-dimensional digital visualization technology versus traditional microscopy on microsurgeons in microsurgery: a prospective self-controlled study.

Emerging three-dimensional digital visualization technology (DVT) provides more advantages than traditional microscopy in microsurgery; however, its impact on microsurgeons' visual and nervous systems and delicate microsurgery is still unclear, which hinders the wider implementation of DVT in digital visualization for microsurgery. Forty-two microsurgeons from the Zhongshan Ophthalmic Center were enrolled in this prospective self-controlled study. Each microsurgeon consecutively performed 30min conjunctival sutures using a three-dimensional digital display and a microscope, respectively. Visual function, autonomic nerve activity, and subjective symptoms were evaluated before and immediately after the operation. Visual functions, including accommodative lag, accommodative amplitude, near point of convergence and contrast sensitivity function (CSF), were measured by an expert optometrist. Heart rate variability was recorded by a wearable device for monitoring autonomic nervous activity. Subjective symptoms were evaluated by questionnaires. Microsurgical performance was assessed by the video-based Objective Structured Assessment of Technical Skill (OSATS) tool. Accommodative lag decreased from 0.63 (0.18) diopters (D) to 0.55 (0.16) D ( P =0.014), area under the log contrast sensitivity function increased from 1.49 (0.15) to 1.52 (0.14) ( P =0.037), and heart rate variability decreased from 36.00 (13.54) milliseconds (ms) to 32.26 (12.35) ms ( P =0.004) after using the DVT, but the changes showed no differences compared to traditional microscopy ( P >0.05). No statistical significance was observed for global OSATS scores between the two rounds of operations [mean difference, 0.05 (95% CI: -1.17 to 1.08) points; P =0.95]. Subjective symptoms were quite mild after using both techniques. The impact of DVT-based procedures on microsurgeons includes enhanced accommodation and sympathetic activity, but the changes and surgical performance are not significantly different from those of microscopy-based microsurgery. Our findings indicate that short-term use of DVT is reliable for microsurgery and the long-term effect of using DVT deserve more consideration.

Light Field Visualization for Training and Education: A Review

Three-dimensional visualization technologies such as stereoscopic 3D, virtual reality, and augmented reality have already emerged in training and education; however, light field displays are yet to be introduced in such contexts. In this paper, we characterize light field visualization as a potential candidate for the future of training and education, and compare it to other state-of-the-art 3D technologies. We separately address preschool and elementary school education, middle and high school education, higher education, and specialized training, and assess the suitability of light field displays for these utilization contexts via key performance indicators. This paper exhibits various examples for education, and highlights the differences in terms of display requirements and characteristics. Additionally, our contribution analyzes the scientific-literature-related trends of the past 20 years for 3D technologies, and the past 5 years for the level of education. While the acquired data indicates that light field is still lacking in the context of education, general research on the visualization technology is steadily rising. Finally, we specify a number of future research directions that shall contribute to the emergence of light field visualization for training and education.

Precision Surgery: Three-dimensional Visualization Technology in the Diagnosis and Surgical Treatment of Abdominal Cancer

Precision Surgery: Three-dimensional Visualization Technology in the Diagnosis and Surgical Treatment of Abdominal Cancer

Application of three-dimensional visualization technology in phacoemulsification benefits the dry eye symptoms of patients after cataract surgery.

To investigate the effects of the three-dimension visualization system on dry eye in patients after cataract phacoemulsification. Seventy-one patients (104 eyes) were enrolled in this study and assigned to the conventional microscopic group (CM group) or three-dimension group (3D group). Ocular Surface Disease Index, The Schirmer I test (SIt), lipid layer thickness (LLT), noninvasive tear breakup time (NIBUT) and other factors associated with dry eye were recorded before and 1 week and 1 month after surgery. The operation time and intraoperative light intensity (ILI) were also recorded. The ILI in the 3D group was significantly lower than that in the CM group (33% vs. 60%, p < 0.01). There was an interaction (group and time) effect for first NIBUT (NIBUT-F), average NIBUT (NIBUT-Ave), tear meniscus height (TMH) and the score of eye redness (Pinteraction < 0.05). The main effects of group on SIt, LLT, NIBUT-F, NIBUT-Ave and the score of eye redness were significant (Pgroup < 0.05). In the CM group, SIt, LLT, NIBUT-F, NIBUT-Ave, TMH were lower than those of the 3D group, the score of eye redness was higher than that of the 3D group at 1 week and 1 month after surgery (all p < 0.05). The changes in NIBUT-F and NIBUT-Ave between before surgery and 1 week after surgery showed negative correlations with ILI (p < 0.01). Compared with microscopic surgery, the 3D visualization system can provide better tear film stability for patients after cataract surgery.

Modern Image-Guided Surgery: A Narrative Review of Medical Image Processing and Visualization.

Medical image analysis forms the basis of image-guided surgery (IGS) and many of its fundamental tasks. Driven by the growing number of medical imaging modalities, the research community of medical imaging has developed methods and achieved functionality breakthroughs. However, with the overwhelming pool of information in the literature, it has become increasingly challenging for researchers to extract context-relevant information for specific applications, especially when many widely used methods exist in a variety of versions optimized for their respective application domains. By being further equipped with sophisticated three-dimensional (3D) medical image visualization and digital reality technology, medical experts could enhance their performance capabilities in IGS by multiple folds. The goal of this narrative review is to organize the key components of IGS in the aspects of medical image processing and visualization with a new perspective and insights. The literature search was conducted using mainstream academic search engines with a combination of keywords relevant to the field up until mid-2022. This survey systemically summarizes the basic, mainstream, and state-of-the-art medical image processing methods as well as how visualization technology like augmented/mixed/virtual reality (AR/MR/VR) are enhancing performance in IGS. Further, we hope that this survey will shed some light on the future of IGS in the face of challenges and opportunities for the research directions of medical image processing and visualization.

Construction and Clinical Application of Digital Intelligent Diagnosis and Treatment System for Hepatocellular Carcinoma

Abstract: In the past 20 years, with the emergence and update of digital intelligent technology, the diagnosis and treatment of hepatocellular carcinoma (HCC) have undergone profound changes. Three-dimensional visualization technology has revolutionized the traditional two-dimensional diagnosis and treatment model of HCC and realized preoperative visualization of tumors and complex liver anatomy. The emergence of ICG fluorescence imaging has realized intraoperative tumor boundary visualization from the molecular and cellular levels. Augmented reality (AR) and mixed reality (MR) technology can realize the three-dimensional visualization of anatomical structures in surgical navigation. Traditional experiential surgery has been transformed into modern intelligent navigation surgery, and surgery has stepped into a new era of digital intelligent technology. In addition, artificial intelligence, molecular imaging and nanoprobes are also expected to achieve early diagnosis and treatment of HCC and improve the prognosis of patients. This article reviews the latest application of digital intelligent diagnosis and treatment technology related to diagnosing and treating HCC, hoping to help achieve accurate diagnosis and treatment of HCC.

A Novel Strategy for Constructing Large-Scale Forest Scene: Integrating Forest Hierarchical Models and Tree Growth Models to Improve the Efficiency and Stability of Forest Polymorphism Simulation

Modeling large-scale scenarios of diversity in real forests is a hot topic in forestry research. At present, there is a common problem of simple and poor model scalability in large-scale forest scenes. Forest growth is often carried out using a holistic scaling approach, which does not reflect the diversity of trees in nature. To solve this problem, we propose a method for constructing large-scale forest scenes based on forest hierarchical models, which can improve the dynamic visual effect of large-scale forest landscape polymorphism. In this study, we constructed tree hierarchical models of corresponding sizes using the detail attribute data of 29 subplots in the Shanxia Experimental Forest Farm in Jiangxi Province. The growth values of trees of different ages were calculated according to the hierarchical growth model of trees, and the growth dynamic simulation of large-scale forest scenes constructed by the integrated model and hierarchical model was carried out using three-dimensional visualization technology. The results indicated that the runtime frame rate of the scene constructed by the hierarchical model was 30.63 fps and the frame rate after growth was 29.68 fps, which met the operational requirements. Compared with the traditional integrated model, the fluctuation value of the frame rate of the hierarchical model was 0.036 less than that of the integrated model, and the scene ran stably. The positive feedback rate of personnel evaluation reached 95%. In this study, the main conclusion is that our proposed method achieves polymorphism in large-scale forest scene construction and ensures the stability of large-scale scene operation.

Using a Portable Autostereoscopic Screen to Improve Anatomy Teaching and Learning

Conventional anatomical models and cadaveric specimens can be time-consuming and resource intensive for any anatomical institute. In recent years, there has been a push for more flexible and varied approaches to teaching, including problem-based and computer-aided learning, which includes web-based anatomical models or the use of three-dimensional visualization technology. With advances in hardware, autostereoscopic (AS) 3D screens have become more affordable, portable, and accessible to individuals, not just institutes. At King’s College London (KCL), we developed the Virtual Anatomy and Histology (VAH) platform—an online resource which focuses on perspective volumetric 3D viewing of medical scan data and 3D models to facilitate the online teaching and learning of anatomy. This paper presents the features of VAH and details a study that was conducted in 2022, to evaluate the VAH 3D AS viewer configured with The Looking Glass Portrait (TLG) (Looking Glass, New York, NY, USA) 8-inch AS display. We tested the hypothesis that using an AS display can improve spatial understanding of cardiovascular anatomy. A cardiovascular 3D textured model was used from our gallery to carry out a spatial test. Twenty current healthcare students at King’s participated in the study and completed a structured questionnaire. Results showed that 47.6% and 52.4% of participants agreed and strongly agreed, respectively, that identifying anatomical structures was easier in 3D compared to 2D. Qualitative feedback was positive as most students found King’s VAH and TLG display “useful for people who need help with spatial understanding” and that “it was a good tool to test your anatomical knowledge”. In conclusion, based on the quantitative results and feedback, we are optimistic that King’s VAH and portable AS displays can be beneficial in anatomy education. With the increasing availability of such systems and competitive pricing, this technology is likely to have a significant impact in education in coming years.

3D visualization technologies for virtual 3D reconstruction of the Earth's history

The work is devoted to the study of the possibilities of three-dimensional visualization technologies in browsers that allow for reconstruction of various time segments of the Earth and subsequent modular integration into the high-tech popular science Internet portal "History of the Earth: geological perspective" [1]. The possibilities of interaction of augmented reality with this portal are shown. An important goal of the work is to popularize modern scientific geological knowledge based on the use of popular scientific multimedia content and appropriate software. The Internet resource is aimed at a wide range of Internet users.

Application of the combination of three-dimensional visualization with a problem-based learning mode of teaching to spinal surgery teaching

ObjectiveTo explore the application of the combination of three-dimensional visualization technology with a problem-based learning mode of teaching in clinical teaching related to spinal surgery.MethodsA total of 106 5-year undergraduate students who majored in clinical medicine were selected as research subjects, and practiced in the Orthopaedics Department of the Affiliated Hospital of Xuzhou Medical University in 2021. These students were randomly divided into an experimental group and a control group, with 53 students in each group. The experimental group received a combination of three-dimensional visualization technology with the PBL teaching mode, while the control group was treated with the traditional teaching method. The teaching effects exhibited by these two groups were compared using tests and questionnaires that were administered after the teaching was completed.ResultsThe theoretical test total scores of students in the experimental group were higher than those of students in the control group. The students in the two groups self-rated their classroom achievements, and the results attained by students in the experimental group were higher than those obtained by students in the control group (P < 0.05). The scores reported by students in the experimental group for interest in learning, classroom atmosphere, classroom interaction and teaching satisfaction were higher than those reported by students in the control group (P < 0.05).ConclusionThe application of a combination of 3D visualization technology with the PBL teaching mode to spinal surgery teaching can improve students’ learning efficiency and interest and is conducive to cultivating students’ clinical thinking.

Application of three-dimensional visualization technology in laparoscopic pyeloplasty for ureteropelvic junction obstruction caused by crossing vessels: a retrospective comparative cohort study.

Ureteropelvic junction obstruction (UPJO) caused by crossing vessels is a common upper urinary tract abnormal development in which the vessels compress the upper segment of the ureter leading to different grades of hydronephrosis. Compared with routine computed tomography (CT) examination, three-dimensional visualization technology (3DVT) can help surgeons better understand the anatomical structure of the target surgical area. The aim of this study was to investigate the clinical value of 3DVT for the diagnosis, preoperative surgical planning, perioperative outcomes, and patient education of UPJO caused by crossing vessels. In this study, we retrospectively analyzed the clinical data of 28 patients who were admitted to the Department of Urology in Xiangya Hospital between January 2016 and December 2021 presenting with UPJO caused by crossing vessel compression. Among the 28 patients included, 13 patients underwent preoperative 3DVT and 15 patients underwent routine computed tomography (CT) scans. After the initial evaluation, all patients received standardized dismembered LP. The 2 groups of patients were compared in terms of demographic parameters, intraoperative data, and perioperative results. After surgery, all patients were asked to complete a Likert scale questionnaire to gain insight into their understanding of the disease and surgery, as well as their satisfaction with the use of different imaging techniques. There were no statistically significant differences in age, gender, body mass index (BMI), side of obstruction, blood vessel compressing the ureteropelvic junction (UPJ), mean duration of hospitalization, and surgical efficacy between the 2 groups. However, the 3DVT group experienced a significant reduction in operation duration (120.8±7.0 versus 144.0±7.9 min, P=0.039), time required for dismemberment of the UPJ (14.8±1.7 versus 24.0±2.2 min, P=0.004), and the amount of intraoperative blood loss (60.8±10.5 versus 95.3±11.9 mL, P=0.041). The 3DVT group was also notably superior to the conventional CT group in terms of the overall levels of patient satisfaction and understanding of the disease and surgery. 3DVT is a helpful preoperative examination tool which can clearly show the anatomical relationship between crossing vessels and the UPJ. In addition, 3DVT can also help patients better understand their conditions and surgical plans, thereby improving patient satisfaction.

Hyper accuracy three-dimensional (HA3D™) technology for planning complex liver resections: a preliminary single center experience

Three-dimensional visualization technology (3DVT) has been recently introduced to achieve a precise preoperative planning of liver surgery. The aim of this observational study was to assess the accuracy of 3DVT for complex liver resections. 3DVT with hyper accuracy three-dimensional (HA3D™) technology was introduced at our institution on February 2020. Anatomical characteristics were collected from two-dimensional imaging (2DI) and 3DVT, while intraoperative and postoperative outcomes were recorded prospectively. A total of 62 patients were enrolled into the study. 3DVT was able to study tumor extension and liver anatomy, identifying at least one vascular variation in 37 patients (59.7%). Future remnant liver volume (FRLV) was measured using 2DI and 3DVT. The paired samples t test assessed positive correlation between the two methods (p < 0.001). At least one vessel was suspected to be invaded by the tumor in 8 (15.7%) 2DI cases vs 16 (31.4%) 3DVT cases, respectively. During surgery, vascular invasion was detected in 17 patients (33.3%). A total of 73 surgical procedures were proposed basing on 2DI, including 2 alternatives for 16 patients. After 3DVT, the previously planned procedure was changed in 15 cases (29.4%), due to the clearer information provided. A total of 51 patients (82%) underwent surgery. The most frequent procedure was right hepatectomy (33.3%), followed by left hepatectomy (23.5%) and left trisectionectomy (13.7%). Vascular resection and reconstruction were performed in 10 patients (19.6%) and portal vein was resected in more than half of these cases (66.7%). 3DVT leads to a more detailed and tailored approach to complex liver surgery, improving surgeons’ knowledge of liver anatomy and accuracy of liver resection.Graphical abstract

Study on digital protection and innovative design of Qin opera costumes

Qin opera culture has a long history in China for thousands of years. It is the ancestor of Chinese opera. However, with the development of modern technology and the rise of new media, the protection and inheritance of traditional Qin opera culture is facing a new challenge and opportunity, its costume culture is the same. This paper analyzes the style and structure of Qin opera costumes, extracts the colors of the costumes, summarizes the costume patterns, and then uses the three-dimensional (3D) virtual visualization technology to virtually restore the Qin opera costume, and innovates the Qin opera costume. In this paper, twelve sets of traditional Qin opera costumes are virtually restored, and on this basis, the digital protection and innovative design of Qin opera series costumes are carried out, and all the restored costumes are displayed digitally in an all-round way. The combination of Qin opera costume and digital protection extends the application scope of virtual visualization technology and enriches the transmission mode of Qin opera costume. This study inherits and protects the traditional Qin opera costume culture better.