Three-dimensional Geometric Morphometric Analysis Research Articles

The controversial case of a coastal Mesolithic tool: A geometric approach to the analysis of the Asturian pick

The Mesolithic period along the coast of the Cantabrian Region (Spain), known as the “Asturian,” is distinguished by the presence of shell middens and a particular lithic tool, the Asturian pick. Despite the tool’s archaeological significance, its technological and functional aspects have not been fully understood, resulting in ambiguous interpretations of its morphological relationships and utilitarian purposes. Our research aims to quantify and analyse the technological processes that have influenced the Asturian pick's form and investigate the selection criteria governing its morphology and choice of raw materials. A novel aspect of our approach is the use of digital methods, including photogrammetry and three-dimensional geometric morphometric analysis. We analysed a sample of Asturian picks, compared against a control group of different elements and raw material specimens. The findings corroborate the homogeneity and standardisation of the Asturian pick's design and unveil regional shape variations that correspond with the distinct raw materials available in each locality.

Drivers of morphological evolution in the toothed whale jaw

Toothed whales (odontocetes) emit high-frequency underwater sounds (echolocate)-an extreme and unique innovation allowing them to sense their prey and environment. Their highly specialized mandible (lower jaw) allows high-frequency sounds to be transmitted back to the inner ear. Echolocation is evident in the earliest toothed whales, but little research has focused on the evolution of mandibular form regarding this unique adaptation. Here, we use a high-density, three-dimensional geometric morphometric analysis of 100 living and extinct cetacean species spanning their ∼50-million-year evolutionary history. Our analyses demonstrate that most shape variation is found in the relative length of the jaw and the mandibular symphysis. The greatest morphological diversity was obtained during two periods of rapid evolution: the initial evolution of archaeocetes (stem whales) in the early to mid-Eocene as they adapted to an aquatic lifestyle, representing one of the most extreme adaptive transitions known, and later on in the mid-Oligocene odontocetes as they became increasingly specialized for a range of diets facilitated by increasingly refined echolocation. Low disparity in the posterior mandible suggests the shape of the acoustic window, which receives sound, has remained conservative since the advent of directional hearing in the aquatic archaeocetes, even as the earliest odontocetes began to receive sounds from echolocation. Diet, echolocation, feeding method, and dentition type strongly influence mandible shape. Unlike in the toothed whale cranium, we found no significant asymmetry in the mandible. We suggest that a combination of refined echolocation and associated dietary specializations have driven morphology and disparity in the toothed whale mandible.

A three-dimensional geometric morphometric analysis of the morphological transformation of Caiman lower jaw during post-hatching ontogeny.

Shape ontogenetic changes of the lower jaw in crocodylians are poorly understood. In order to answer some questions related to the inter- and intraspecific morphological variation of the mandible of two extant Caiman species, we performed a three-dimensional geometric morphometric approach. For this purpose, we used landmarks and semilandmarks on two ontogenetic mandibular series of 48 and 15 post-hatching specimens of C. yacare and C. latirostris, respectively. We have also examined the relationship between these anatomical transformations and ontogenetic shifts in diet. We performed a principal component analysis (PCA) for the two species, and regression and partial least squares (PLS) analyses for each species, separately. As a result, species were segregated along the PC1 with specimens of C. yacare showing more gracile mandibles, and specimens of C. latirostris more robust ones. The PC2 and regression analyses showed an age gradient and represented ontogenetic shape changes. Adult caiman mandibles are higher and wider than juvenile ones, and shape changes are more conspicuous in C. latirostris. The PLS analyses showed a significant relationship between shape and diet. Morphological changes of the PLS1 of block-1 match with those of the regression analysis for both species. We have detected morphological transformations in areas where the musculature in charge of mandibular movements is attached. Common morphological changes occurring during ontogeny seem to reflect the same mechanical properties required for crushing and killing in both species, driven by an ontogenetic shift in the diet from invertebrates to vertebrates. Additionally, interspecific differences were also found to be correlated to ontogenetic changes in diet and could be related to dissimilar feeding mechanical requirements (e.g., stiffness and toughness of the item consumed), and to different habitat preferences. Robust mandibles would be more suitable for shallow and fully vegetated environments, as it can be seen in C. latirostris, whereas slender jaws seem to be more suitable for more aquatic species such as C. yacare.

Dots on a screen: The past, present, and future of morphometrics in the study of nonavian dinosaurs.

Using morphometrics to study nonavian dinosaur fossils is a practice that predates the origin of the word "dinosaur." By the 1970s, linear morphometrics had become established as a valuable tool for analyzing intra- and interspecific variation in nonavian dinosaurs. With the advent of more recent techniques such as geometric morphometrics and more advanced statistical approaches, morphometric analyses of nonavian dinosaurs have proliferated, granting unprecedented insight into many aspects of their biology and evolution. I outline the past, present, and future of morphometrics as applied to the study of nonavian dinosaurs zeroing in on five aspects of nonavian dinosaur paleobiology where morphometrics has been widely utilized to advance our knowledge: systematics, sexual dimorphism, locomotion, macroevolution, and trackways. Morphometric methods are especially susceptible to taphonomic distortion. As such, the impact of taphonomic distortion on original fossil shape is discussed as are current and future methods for quantifying and accounting for distortion with the goal of reducing the taphonomic noise to biological signal ratio. Finally, the future of morphometrics in nonavian dinosaur paleobiology is discussed as paleobiologists move into a "virtual paleobiology" framework, whereby digital renditions of fossils are captured via methods such as photogrammetry and computed tomography. These primary data form the basis for three-dimensional (3D) geometric morphometric analyses along with a slew of other forms of analyses. These 3D specimen data form part of the extended specimen and help to democratize paleobiology, unlocking the specimen from the physical museum and making the specimen available to researchers across the world.

Reassessment of the human mandible from Banyoles (Girona, Spain)

Since the discovery of a human mandible in 1887 near the present-day city of Banyoles, northeastern Spain, researchers have generally emphasized its archaic features, including the lack of chin structures, and suggested affinities with the Neandertals or European Middle Pleistocene (Chibanian) specimens. Uranium-series and electron spin resonance dating suggest the mandible dates to the Late Pleistocene (Tarantian), approximately ca. 45–66 ka. In this study, we reassessed the taxonomic affinities of the Banyoles mandible by comparing it to samples of Middle Pleistocene fossils from Africa and Europe, Neandertals, Early and Upper Paleolithic modern humans, and recent modern humans. We evaluated the frequencies and expressions of morphological features and performed a three-dimensional geometric morphometric analysis on a virtual reconstruction of Banyoles to capture overall mandibular shape. Our results revealed no derived Neandertal morphological features in Banyoles. While a principal component analysis based on Euclidean distances from the first two principal components clearly grouped Banyoles with both fossil and recent Homo sapiens individuals, an analysis of the Procrustes residuals demonstrated that Banyoles did not fit into any of the comparative groups. The lack of Neandertal features in Banyoles is surprising considering its Late Pleistocene age. A consideration of the Middle Pleistocene fossil record in Europe and southwest Asia suggests that Banyoles is unlikely to represent a late-surviving Middle Pleistocene population. The lack of chin structures also complicates an assignment to H. sapiens, although early fossil H. sapiens do show somewhat variable development of the chin structures. Thus, Banyoles represents a non-Neandertal Late Pleistocene European individual and highlights the continuing signal of diversity in the hominin fossil record. The present situation makes Banyoles a prime candidate for ancient DNA or proteomic analyses, which may shed additional light on its taxonomic affinities.

Altering osteoclast numbers using CTSK models in utero affects mice offspring craniofacial morphology.

Bone remodelling during development and growth is important for craniofacial integrity of offspring. The aim of this study was to investigate the changes in offspring adult skull morphology when the osteoclasts number was altered in utero, using three-dimensional (3D) geometric morphometric analysis (GMA). We altered osteoclasts number in utero via two approaches. First, we generated heterozygous CtskCre ;DTAfl/+ (diphtheria toxin A) mice. Second, we altered Ctsk expression in vivo by injecting pregnant wild-type dams at embryonic day (E) 12.5 with in vivo siRNA specific for Ctsk. Mice were collected at 6 weeks and analysed using geometric morphometric analysis via computed tomography, histomorphometry and gene expression analysis. Altering osteoclasts number in utero affected the offspring adult skull morphology. Decreased Ctsk and osteoclast numbers were associated with a decrease in cranial vault height and an increase in mandibular body length. Changes in size and shape were observed with an increased number of osteoclasts in CtskCre ;DTAfl/+ mice, including an increase in cranial vault height, as well as a shortening of mandibular body length and ramus height. The findings of this study suggest that modulation of osteoclast numbers during pre- and post-natal development may be a previously unknown factor in the aetiology of skeletal malocclusions. An improved understanding of the factors affecting bone homeostasis during development and growth may help in the development of future therapies that would target the early intervention of skeletal malocclusion.

The tempo of cetacean cranial evolution

The evolution of cetaceans (whales and dolphins) represents one of the most extreme adaptive transitions known, from terrestrial mammals to a highly specialized aquatic radiation that includes the largest animals alive today. Many anatomical shifts in this transition involve the feeding, respiratory, and sensory structures of the cranium, which we quantified with a high-density, three-dimensional geometric morphometric analysis of 201 living and extinct cetacean species spanning the entirety of their ∼50-million-year evolutionary history. Our analyses demonstrate that cetacean suborders occupy distinct areas of cranial morphospace, with extinct, transitional taxa bridging the gap between archaeocetes (stem whales) and modern mysticetes (baleen whales) and odontocetes (toothed whales). This diversity was obtained through three key periods of rapid evolution: first, the initial evolution of archaeocetes in the early to mid-Eocene produced the highest evolutionary rates seen in cetaceans, concentrated in the maxilla, frontal, premaxilla, and nasal; second, the late Eocene divergence of the mysticetes and odontocetes drives a second peak in rates, with high rates and disparity sustained through the Oligocene; and third, the diversification of odontocetes, particularly sperm whales, in the Miocene (∼18-10 Mya) propels a final peak in the tempo of cetacean morphological evolution. Archaeocetes show the fastest evolutionary rates but the lowest disparity. Odontocetes exhibit the highest disparity, while mysticetes evolve at the slowest pace, particularly in the Neogene. Diet and echolocation have the strongest influence on cranial morphology, with habitat, size, dentition, and feeding method also significant factors impacting shape, disparity, and the pace of cetacean cranial evolution.

Temporomandibular joint shape in anthropoid primates varies widely and is patterned by size and phylogeny.

The temporomandibular joint is the direct interface between the mandible and the cranium and is critical for transmitting joint reaction forces and determining mandibular range of motion. As a consequence, understanding variation in the morphology of this joint and how it relates to other aspects of craniofacial form is important for better understanding masticatory function. Here, we present a detailed three-dimensional (3D) geometric morphometric analysis of the cranial component of this joint, the glenoid fossa, across a sample of 17 anthropoid primates, and we evaluate covariation between the glenoid and the cranium and mandible. We find high levels of intraspecific variation in glenoid shape that is likely linked to sexual dimorphism and joint remodeling, and we identify differences in mean glenoid shape across taxonomic groups and in relation to size. Analyses of covariation reveal strong relationships between glenoid shape and a variety of aspects of cranial and mandibular form. Our findings suggest that intraspecific variation in glenoid shape in primates could further be reflective of high levels of functional flexibility in the masticatory apparatus, as has also been suggested for primate jaw kinematics and muscle activation patterns. Conversely, interspecific differences likely reflect larger scale differences between species in body size and/or masticatory function. Results of the covariation analyses dovetail with those examining covariation in the cranium of canids and may be indicative of larger patterns across mammals.

Ovariectomized rat model and shape variation in the bony labyrinth.

Postmenopausal osteoporosis is a serious concern in aging individuals, but has not been explored for its potential to alter the shape of the inner ear by way of increased remodeling in the otic capsule. The otic capsule, or bony labyrinth, is thought to experience uniquely limited remodeling after development due to high levels of osteoprotegerin. On this basis, despite the widespread remodeling that accompanies osteoporosis, we hypothesize that both the shape and volume of the semicircular canals will resist such changes. To test this hypothesis, we conducted three-dimensional geometric morphometric shape analysis on microcomputed tomographic data collected on the semicircular canals of an ovariectomized (OVX) rat model. A Procrustes ANOVA found no statistically significant differences in shape between surgery and sham groups, and morphological disparity testing likewise found no differences in shape variation. Univariate testing found no differences in semicircular volume between OVX and control groups. The range of variation in the OVX group, however, is greater than in the sham group but this difference does not reach statistical significance, perhaps because of a combination of small effect size and low sample size. This finding suggests that labyrinthine shape remains a tool for assessing phylogeny and function in the fossil record, but that it is possible that osteoporosis may be contributing to intraspecific shape variation in the bony labyrinth. This effect warrants further exploration at a microstructural level with continued focus on variables related to remodeling.

Altering calcium and phosphorus supplementation in pregnancy and lactation affects offspring craniofacial morphology in a sex-specific pattern

The effects on offspring craniofacial bone morphology and accretion because of altered maternal exposure to dietary components such as calcium (Ca) and phosphorus (P) are unclear. The objective of this study was to investigate the changes in offspring skull morphology and tissue mineral density (TMD), including sex-specific changes, with exposure to a maternal diet high in Ca-to-P levels during gestation and lactation in mice. Time-mated FVB wild-type mice were fed a normal or experimental diet during gestation until weaning. The experimental diet contained a 3-fold increase in Ca and a 3-fold decrease in P (Ca:P molar ratio, 10.5) compared with normal mouse chow (Ca:P molar ratio, 1.5). The heads of 6-week-old control andexperimental offspring mice were collected and scanned using microcomputed tomography. Three-dimensional geometric morphometric analysis was performed to analyze changes in craniofacial morphology. TMD measurements were also analyzed. We observed subtle changes and no significant differences between offspring control and experimental skulls when we compared all samples. However, when we separated skulls by sex, we discovered significant differences in craniofacial morphology and TMD. Experimental female offspring possessed skulls that were smaller, narrower transversely, taller vertically, and decreased in TMD. Experimental male offspring possessed skulls that were larger, wider transversely, shorter vertically, and increased in TMD. Maternal exposure to diet and increased Ca:P molar ratio during gestation and lactation led to significant, sex-specific morphologic and TMD changes in 6-week-old mouse skulls.

New fossils of Australopithecus sediba reveal a nearly complete lower back.

Adaptations of the lower back to bipedalism are frequently discussed but infrequently demonstrated in early fossil hominins. Newly discovered lumbar vertebrae contribute to a near-complete lower back of Malapa Hominin 2 (MH2), offering additional insights into posture and locomotion in Australopithecus sediba. We show that MH2 possessed a lower back consistent with lumbar lordosis and other adaptations to bipedalism, including an increase in the width of intervertebral articular facets from the upper to lower lumbar column ('pyramidal configuration'). These results contrast with some recent work on lordosis in fossil hominins, where MH2 was argued to demonstrate no appreciable lordosis ('hypolordosis') similar to Neandertals. Our three-dimensional geometric morphometric (3D GM) analyses show that MH2's nearly complete middle lumbar vertebra is human-like in overall shape but its vertebral body is somewhat intermediate in shape between modern humans and great apes. Additionally, it bears long, cranially and ventrally oriented costal (transverse) processes, implying powerful trunk musculature. We interpret this combination of features to indicate that A. sediba used its lower back in both bipedal and arboreal positional behaviors, as previously suggested based on multiple lines of evidence from other parts of the skeleton and reconstructed paleobiology of A. sediba.

Comparing and combining sliding semilandmarks and weighted spherical harmonics for shape analysis.

Quantifying morphological variation is critical for conducting anatomical research. Three-dimensional geometric morphometric (3D GM) landmark analyses quantify shape using homologous Cartesian coordinates (landmarks). Setting up a high-density landmark set and placing it on all specimens, however, can be a time-consuming task. Weighted spherical harmonics (SPHARM) provides an alternative method for analyzing the shape of such objects. Here we compare sliding semilandmark and SPHARM analyses of the calcaneus of Gorilla gorilla gorilla (n=20), Pan troglodytes troglodytes (n=20), and Homo sapiens (n=20) to determine whether the SPHARM and sliding semilandmark analyses capture comparable levels of shape variation. We also compare both the sliding semilandmark and SPHARM analyses to a novel combination of the two methods, here termed SPHARM-sliding. In SPHARM-sliding, the vertices of the surface models produced from the SPHARM analysis (that are the same in number and relative location) are used as the starting landmark positions for a sliding semilandmark analysis. Calcaneal shape variation quantified by all three analyses was summarized using separate principal components analyses. Results were compared using the root mean square (RMS) and maximum distance between surface models of species averages scaled (up) to centroid size created from each analysis. The average RMS was 0.23mm between sliding semilandmark and SPHARM average surface models, 0.19mm between SPHARM and SPHARM sliding average surface models, and 0.22mm between sliding semilandmark and SPHARM sliding average surface models. Although results indicate that all three analyses are comparable methods for 3D shape analysis, there are advantages and disadvantages to each. While the SPHARM analysis is less time-intensive, it is unable to capture the same level of detail around the sharp edges of articular facets on average surface models as the sliding semilandmark analysis. The SPHARM analysis also does not allow for individual articular facets to be analyzed in isolation. SPHARM-sliding, however, captures the same level of detail as the sliding semilandmark analysis, and (as in the sliding semilandmark analysis) allows for the evaluation of individual portions of bone. SPHARM is a comparable method to a 3D GM analysis for small, irregularly shaped bones, such as the calcaneus, and SPHARM-sliding allows for an expedited set up process for a sliding semilandmark analysis.

Medial femoral trochlea flap reconstruction versus proximal row carpectomy for Kienböck's disease: a morphometric comparison.

Surgical options for advanced Kienböck's disease include proximal row carpectomy or lunate reconstruction with a medial femoral trochlea osteochondral flap. This study compares morphology of the proximal capitate and the medial femoral trochlear surfaces to the proximal lunate using three-dimensional geometric morphometric analysis. Virtual articular surfaces were extracted from MRI studies of ten healthy volunteers. Distances between corresponding points on the proximal lunate and proximal capitate or medial femoral trochlear surfaces were measured. In seven subjects, mean inter-surface distance for the medial femoral trochlea-proximal lunate pair was significantly lower than the proximal capitate-proximal lunate pairing. In three subjects, mean proximal capitate-proximal lunate distance was significantly lower. We conclude that the medial femoral trochlear flap was anatomically closer to the shape of the proximal lunate in the majority of the examined subjects. However, we found that in three out of ten cases, the proximal capitate was a better match.

Identification of Race: A Three-Dimensional Geometric Morphometric and Conventional Analysis of Human Fourth Cervical Vertebrae in Adult Malaysian Population

Introduction: Estimation of race plays a significant role in establishing personal identity in forensic anthropology. A cervical vertebra is one of the bones that is least researched in forensic applications. Our study aims to investigate the morphologic variations of the fourth cervical vertebrae (C4) between the different major races in the adult Malaysian population using a three-dimensional (3D) geometric morphometrics method. Methods: Computer tomography images of C4 vertebra, which consist of 386 subjects (169 Malay, 82 Chinese, and 135 Indian) were collected retrospectively from University of Malaya. Twenty-eight landmarks were placed on the images. Procrustes MANOVA, canonical variates analysis(CVA), discriminant function analysis (DFA), and linear measurement were performed using Planmeca Romexis, Checkpoint Stratovan, Morpho J, and Graphpad Prism software respectively to analyze the morphological variations of C4. Results: Procrustes MANOVA showed significant differences in the shape (p <0.0001) and centroid size (p = 0.0003) of the C4 vertebra between races. Canonical variate analysis showed significant differences for Mahalanobis (p <0.0001) and Procrustes (p <0.0001) distances among races. Besides that, a cross-validation value of 66.5% was demonstrated by discriminant function analysis. The use of linear measurements reveals no significant differences between the races, thesemeasurements are the vertebral body height, anterior-posterior length of the vertebral body, length of superior articular facet, and spinous process length. Both intra- and inter-observational reliabilities showed that acceptable human errors for measurement accuracy. Conclusions: Morphologic variations in the shape of C4 can assist in race estimation of the adult Malaysian population using the 3D geometric morphometric approach.

Reassessment of the phylogenetic relationships of the late Miocene apes Hispanopithecus and Rudapithecus based on vestibular morphology

Late Miocene great apes are key to reconstructing the ancestral morphotype from which earliest hominins evolved. Despite consensus that the late Miocene dryopith great apes Hispanopithecus laietanus (Spain) and Rudapithecus hungaricus (Hungary) are closely related (Hominidae), ongoing debate on their phylogenetic relationships with extant apes (stem hominids, hominines, or pongines) complicates our understanding of great ape and human evolution. To clarify this question, we rely on the morphology of the inner ear semicircular canals, which has been shown to be phylogenetically informative. Based on microcomputed tomography scans, we describe the vestibular morphology of Hispanopithecus and Rudapithecus, and compare them with extant hominoids using landmark-free deformation-based three-dimensional geometric morphometric analyses. We also provide critical evidence about the evolutionary patterns of the vestibular apparatus in living and fossil hominoids under different phylogenetic assumptions for dryopiths. Our results are consistent with the distinction of Rudapithecus and Hispanopithecus at the genus rank, and further support their allocation to the Hominidae based on their derived semicircular canal volumetric proportions. Compared with extant hominids, the vestibular morphology of Hispanopithecus and Rudapithecus most closely resembles that of African apes, and differs from the derived condition of orangutans. However, the vestibular morphologies reconstructed for the last common ancestors of dryopiths, crown hominines, and crown hominids are very similar, indicating that hominines are plesiomorphic in this regard. Therefore, our results do not conclusively favor a hominine or stem hominid status for the investigated dryopiths.

Comparative anatomy and 3D geometric morphometrics of the El Sidrón atlases (C1)

The first cervical vertebra (atlas, C1) is an important element of the vertebral column because it connects the cranial base with the cervical column, thus helping to maintain head posture and contributing to neck mobility. However, few atlases are preserved in the fossil record because of the fragility of this vertebra. Consequently, only eight well-preserved atlases from adult Neandertals have been recovered and described. Here, we present nine new atlas remains from the El Sidrón Neandertal site (Asturias, Spain), two of which (SD-1643 and SD-1605/1595) are sufficiently well preserved to allow for a detailed comparative and three-dimensional geometric morphometric analysis. We compared standard linear measurements of SD-1643 and SD-1605/1595 with those of other Neandertal atlases and carried out three-dimensional geometric morphometric analyses to compare size and shape of SD-1643 and SD-1605/1595 with those of 28 Pan (Pan troglodytes and Pan paniscus), a broad comparative sample of 55 anatomically modern humans from African and European populations, and other fossil hominins (Neandertals, Homo antecessor, Paranthropus boisei). The El Sidrón atlas fossils show typical features of the Neandertal atlas morphology, such as caudal projection of the anterior tubercle, gracility of both the posterior tubercle and the tuberosity for the insertion of the transverse ligament, and an anteroposteriorly elongated neural canal. Furthermore, when compared with atlases from the other taxa, Neandertals exhibit species-specific features of atlas morphology including a relatively lower lateral mass height, relatively narrower transverse foramina, and flatter and more horizontally oriented articular facets. Some of these features fit with previous suggestions of shorter overall length of the cervical spine and potential differences in craniocervical posture and mobility. Our results may support a different spinopelvic alignment in this species, as the atlas morphology suggests reduced cervical lordosis.

Effects of Multi-Generational Soft Diet Consumption on Mouse Craniofacial Morphology.

Variations in craniofacial morphology may arise as a result of adaptation to different environmental factors such as soft diet (SD), which lessens functional masticatory load. Prior studies have shown that changes in the masticatory muscle function associated with a switch to short-term SD led to changes in craniofacial morphology and alveolar bone architecture. However, the long-term effects of SD and the associated adaptive changes in craniofacial shape are unclear. Our novel study set out to profile prospective skull changes in mice fed with SDs over multiple generations using three-dimensional (3D) geometric morphometric analysis (GMA). Our results revealed that short-term SD consumption led to a significant decrease in craniofacial size, along with numerous shape changes. Long-term SD consumption over 15 continuous generations was not associated with changes in craniofacial size; however, shape analysis revealed mice with shortened crania and mandibles in the anteroposterior dimension, as well as relative widening in the transverse dimension compared to the average shape of all mice analyzed in our study. Moreover, changes in shape and size associated with different functional loads appeared to be independent – shape changes persisted after diets were switched for one generation, whereas size decreased after one generation and then returned to baseline size. Our study is the first to study the role of prolonged, multi-generational SD consumption in the determination of craniofacial size and shape.

Using three-dimensional geometric morphometric and dental topographic analyses to infer the systematics and paleoecology of fossil treeshrews (Mammalia, Scandentia)

AbstractTreeshrews are small, Indomalayan mammals closely related to primates. Previously, three-dimensional geometric morphometric analyses were used to assess patterns of treeshrew lower second molar morphology, which showed that the positions of molar landmarks covary with intraordinal systematics. Another analysis used dental topographic metrics to test patterns of functional dental morphology and found that molar curvature, complexity, and relief were an effective means for examining patterns of variation in treeshrew dietary ecology. Here, we build on these analyses by adding two fossil taxa,Prodendrogale yunnanicaQiu, 1986 from the Miocene of China andPtilocercus kylinLi and Ni, 2016 from the Oligocene of China. Our results show thatPr. yunnanicahad a dental bauplan more like that of a tupaiid than that of a ptilocercid, but that the extant tupaiids, includingTupaiaandDendrogale, are more similar to one another in this regard than any are toProdendrogale.This is contrary to our expectations asProdendrogaleis hypothesized to be most closely related toDendrogale. Ptilocercus kylin,which has been proposed to be the sister taxon ofPt. lowiiGray, 1848, is characterized by dental morphology like that ofPt. lowiiin crest and cuspal position but is interpreted to have been more frugivorous. It has been claimed thatPtilocercushas undergone little morphological change through time. Our results suggest thatPt. kylinwas more ecologically distinct fromPt. lowiithan previously proposed, providing a glimpse into a more complex evolutionary history of the group than had been inferred.

Testing Species Assignments in Extant Terebratulide Brachiopods: A Three-dimensional Geometric Morphometric Analysis of Long-Looped Brachidia.

Species of terebratulide brachiopods have been largely characterized qualitatively on the basis of morphology. Furthermore, species-level morphological variability has rarely been analyzed within a quantitative framework. The objective of our research is to quantify morphological variation to test the validity of extant named species of terebratulide brachiopods, focusing on the lophophore-supporting structures—the “long loops.” Long loops are the most distinctive and complex morphological feature in terebratellidine brachiopods and are considered to be phylogenetically and taxonomically informative. We studied eight species with problematic species identities in three genera distributed in the North Pacific: Laqueus, Terebratalia, and Dallinella. Given how geometrically complex long loops are, we generated 3D models from computed tomography (CT) scans of specimens of these eight species and analyzed them using 3D geometric morphometrics. Our goal was to determine ranges of variation and to test whether species are clearly distinguishable from one another in morphospace and statistically. Previous studies have suggested that some species might be overly split and are indistinguishable. Our results show that these extant species of terebratellidines can be reliably distinguished on the basis of quantitative loop morphometrics. Using 3D geometric morphometric methods, we demonstrate the utility of CT beyond purely descriptive imaging purposes in testing the morphometric validity of named species. It is crucial to treat species described and named from qualitative morphology as working hypotheses to be tested; many macroevolutionary studies depend upon the accurate assessment of species in order to identify and seek to explain macroevolutionary patterns. Our results provide quantitative documentation of the distinction of these species and thus engender greater confidence in their use to characterize macroevolutionary patterns among extant terebratellidine brachiopods. These methods, however, require further testing in extinct terebratellidines, which only rarely preserve the delicate long loop in three dimensions. In addition, molecular analyses of extant terebratellidines will test the species delimitations supported by the morphometric analyses presented in this study. [Species determination; morphological variability; 3D geometric morphometrics; terebratulide brachiopods; long loops.]

Three-dimensional geometric morphometric analysis of tooth shape in hypodontia: II size variation.

The study aimed to evaluate differences in tooth size between patients with hypodontia and those with normal complement of permanent teeth using three-dimensional geometric morphometric analysis. The number of anatomical landmarks was recorded on the clinical crown of the permanent teeth on three-dimensional scanned study models of hypodontia and in control subjects. The study sample comprised 120 patients with hypodontia (mild, moderate, severe) and 40 controls matched for age and sex. Tooth size differences were tested statistically using multivariate statistics. Size variation was for the most part found to be significant, especially when the control subjects were compared with the hypodontia groups. The explained variance among group membership was generally larger in the anterior and premolar region than in the molar region Sexual dimorphism was found less in the anterior region than in the posterior region; therefore, the sexes were pooled more often for teeth in the anterior region. Quantitative measurement of tooth size in patients with hypodontia may enhance the multidisciplinary management of these patients.