Three-dimensional Fluorescence Spectra Research Articles

Characterization of the structural and molecular interactions of Ferulic acid ethyl ester with human serum albumin and Lysozyme through multi-methods

Ferulic acid ethyl ester (FAEE) is an essential raw material for the formulation of drugs for cardiovascular and cerebrovascular diseases and leukopenia. It is also used as a fixed aroma agent for food production due to its high pharmacological activity. In this study, the interaction of FAEE with Human serum albumin (HSA) and Lysozyme (LZM) was characterized by multi-spectrum and molecular dynamics simulations at four different temperatures. Additionally, the quenching mechanism of FAEE-HSA and FAEE-LZM were explored. Meanwhile, the binding constants, binding sites, thermodynamic parameters, molecular dynamics, molecular docking binding energy, and the influence of metal ions in the system were evaluated. The results of Synchronous fluorescence spectroscopy, UV–vis spectroscopy, CD, three-dimensional fluorescence spectrum, and resonance light scattering showed that the microenvironment of HSA and LZM and the protein conformation changed in the presence of FAEE. Furthermore, the effects of some common metal ions on the binding constants of FAEE-HSA and FAEE-LZM were investigated. Overall, the experimental results provide a theoretical basis for promoting the application of FAEE in the cosmetics, food, and pharmaceutical industries and significant guidance for food safety, drug design, and development.

New 3-D Fluorescence Spectral Indices for Multiple Pigment Inversions of Plant Leaves via 3-D Fluorescence Spectra

High-sensitivity fluorescence monitoring has been widely used in agriculture and environmental science. However, the active fluorescence detection information of leaf segments mainly focuses on total chlorophyll, and the fluorescence information of chlorophyll a, chlorophyll b, and some other pigments has not been explored. This only considers the fluorescence spectrum characteristics at a single wavelength or the fluorescence integral from a range of wavelength regions and does not completely consider the linkage relation between the excitation, emission, and interference information. In this paper, the three-dimensional fluorescence spectrum, containing the excitation and emission fluorescence spectra, and the corresponding multiple pigment characteristics from the upgraded LOPEX_ZJU database were collected. The linkages of excitation and emission of the three-dimensional fluorescence spectra of these pigments were analyzed for the newly built multiple pigment 3-D fluorescence spectral indices (3-D FSIs), including those of chlorophyll a, chlorophyll b, carotenoid, anthocyanin, and flavonoid 3-D FSIs. Then, these pigment inversion models were established and validated. The results show that the 3-D FSIs performances for the photosynthetic pigment content inversion (including chlorophyll a and b, and carotenoids) were much better than those for the photo-protective pigments (including anthocyanins and flavonoids) from the 3-D fluorescence spectra of these plant leaves. Here, the 3-D fluorescence normalization index (FNI ((F430,690-F430,763)/(F430,690+F430,763))) for the chlorophyll a inversion model has a high accuracy, the RMSE is 2.96 μg/cm2, and the 3-D fluorescence reciprocal difference index (FRI (F650,704/F650,668) for the chlorophyll b model has an encouraging RMSE (2.01 μg/cm2). The RMSE of the 3-D fluorescence ratio index (FRI (F500,748/F500,717)) for the carotenoid inversion is 3.77 μg/cm2 RMSE. Only FRI (F370,615/F370,438) was selected for the modeling and validating evaluation of the leaf Flas content inversion, but the evaluation metrics were not good, with an RMSE (151.13 μg/cm2). For Ants, although there was a 3-D FSI (FRDI (1/F540,679-1/F540,557)), and its evaluation metrics, with an RMSE (2.8 μg/cm2), were at or over 0.05 level, the validating evaluation metric VC (98.3577%) was not encouraging. These results showed that fluorescence, as a nondestructive and efficient detection method, could determine the contents of chlorophyll a, chlorophyll b, and carotenoid in plant leaves, providing a new method to detect plant information. It can also provide a potential chance for the fluorescence images of fine photo-protective pigments, especially chlorophyll a and b, using the special active fluorescence excitation light source and a few fluorescence imaging channels from the optimal FSIs.

Synergistic effects of air–liquid flow and electric field on membrane performance

High-level membrane fouling control is required in various membrane processes. Different techniques have been proposed for membrane fouling control, while the synergistic effects of the techniques are less explored. We proposed a novel membrane fouling control approach by applying slug flow and an electric field simultaneously. In contrast to synthetic bulk solutions, surface water containing different particles with various properties was applied. Results showed that transmembrane pressure (TMP) increased from 8 kPa to 10 kPa in 30 min at an optimized air velocity, showing a significant increasing trend. Nevertheless, by applying an electric field with a voltage ranging from 0.5 V to 1.0 V, TMP remained relatively constant over 120 min of filtration with a permeate flux at 100 L/m2.h, showing that a significant membrane fouling control effect was achieved. Particle size and zeta potential of permeate decreased and increased respectively by applying the bubbles, while the effects were enhanced significantly when an electric field was further applied. Furthermore, three-dimensional fluorescence spectrum confirmed that the amount of membrane foulant was reduced significantly by the synergistic effect. This study proved that microparticles were affected by the slug flow and the electric field affected nanoparticles respectively. By this way, the novel approach was effective in enhancing membrane performance by tackling membrane foulants with different properties. This study also contributed to a better understanding of corresponding membrane fouling process in membrane bioreactors.

Mechanistic insights of efficient aromatic organic compounds oxidation using biochar derived from coking wastewater sludge

Coking wastewater sludge possessed potential environmental hazards and pyrolysis was a desirable approach which could converted it into one functional carbonous material. The sludge-based biochar (SC-N3) originated from the feedstock of sludge from the regenerated water treatment had various iron-containing species and exhibited the effective catalytic ability. Compared with the degradation of the four pollutants (i.e., phenol, pyridine, quinoline and indole) alone, the mixed of the four pollutants in simulated coking wastewater exhibited a prominent different degradation trend, where the removal rates of indole and quinoline were enhanced from 45% and 30% to 98.9% and 82.3%, respectively. The quinone intermediates from phenol degradation, played a critical role in enhancing the removal rates of indole and quinoline as the electron transfer medium. Both the free radical pathway dominated by •OH and non-radical pathway with 1O2 play the main role in indole degradation, while •OH was the main factor in the catalytic degradation of phenol, quinoline and pyridine. By analysis the intermediates elucidated by Fourier transform ion cyclotron resonance mass spectrometry and three-dimensional excitation-emission matrix fluorescence spectra, the degradation molecular characteristics and pathways of the four pollutants in simulated coking wastewater were deciphered. The findings indicated that the catalyst SC-N3 prepared from the coking wastewater sludge presented unique catalytic properties and possessed a promising application in the degradation of refractory wastewater.

The interaction between troxerutin and pepsin was studied by multispectral method and molecular docking simulation

The mechanism of action and quenching mode between troxerutin and pepsin were investigated in this study using ultraviolet-visible absorption spectroscopy, Fourier transform infrared spectroscopy, fluorescence spectroscopy, three-dimensional fluorescence spectroscopy, synchronous fluorescence spectroscopy, circular binary chromatography, and molecular docking simulation. The fluorescence spectroscopy results demonstrated a reduction in the fluorescence intensity of pepsin upon addition of troxerutin, indicating its quenching effect on pepsin. By employing the Stern-Volmer equation to determine KSV and Kq values, it can be inferred that troxerutin exhibits static quenching as the predominant mode of interaction with pepsin. By conducting experiments, the binding constant KA and the number of binding sites n for troxerutin and pepsin were determined, with the number of binding sites n being close to 1, indicating the presence of a specific binding site between troxerutin and pepsin. Thermodynamic analysis was employed to calculate the thermodynamic parameters at 298 K. The negative values of ΔH and ΔS suggest that van der Waals forces and hydrogen bonding are predominant in mediating the interaction between troxerutin and pepsin. The negativity of ΔG indicates the spontaneity of the reaction. The results of molecular docking simulations demonstrate that troxerutin binds to the central active region of pepsin, with hydrogen bonds, van der Waals forces, hydrophobic interactions and adverse collisions contributing to the binding forces between troxerutin and pepsin. Based on the analysis of UV–vis absorption spectrum, three-dimensional fluorescence spectrum, synchronous fluorescence spectrum, and infrared spectrum, it is evident that troxerutin modulates the microenvironment surrounding tryptophan amino acid residues in pepsin. This modulation leads to a reduction in polarity and hydrophilicity while increasing hydrophobicity, consequently inducing alterations in the secondary structure of pepsin. By measuring the binding distance, it is calculated that 0.5 R0 < r < 1.5 R0 and r < 7 nm, indicating the occurrence of non-radiative energy transfer between troxerutin and pepsin. Analysis of the circular dichroism spectrum confirms that pepsin predominantly adopts a β-folded (β-sheet) conformation, providing evidence for the interaction between troxerutin and pepsin. Furthermore, troxerutin induces alterations in the microenvironment of pepsin's structure, ultimately resulting in changes to its secondary structure. These findings shed light on the binding mechanism underlying troxerutin and pepsin interactions while offering valuable reference data for future research and applications involving troxerutin.

S-type heterojunction enhance the photocatalytic activity of TiO2/AgBr/Ag using loofah sponge as template towards ciprofloxacin degradation

Photocatalyst TiO2/AgBr/Ag (TBA) composites using loofah sponge as a template were successfully prepared for the first time. The photocatalytic activities of the TBA composites were evaluated by removing ciprofloxacin (CIP) under visible light. The PDOS shows that the valence band edge of TBA-30 is primarily composed of Ti 3d atom states, with small contributions from O 2p atom states. The conduction band edge is dominated by Ag 4d and O 2p atom states, with minor contributions from Br 4p atom states. TBA-30 composites demonstrate outstanding photocatalytic performance, degrading 87% of the target within 180 min. The degradation rate of CIP decreased to 70.19% after five runs, Furthermore, the TOC removal efficiency of CIP reached 84.2% in the end. CIP intermediates and degradation pathway were determined by GC-MS. Three-dimensional excitation-emission matrix fluorescence spectra (3D EEM) were used to study the degradation of CIP molecules. Trapping experiments and electron paramagnetic resonance (EPR) characterisation identified superoxide (·O2-) and photogenerated holes (h+) as the primary active radicals. Furthermore, formed S-type heterojunction and Ag as the electron capture site enhanced the separation efficiency of photoinduced electron-hole pairs. The DFT calculation was used to study the electron transport performance of TBA-30 by calculating the charge density difference.

Comparison of treatment performance and microbial community evolution of typical dye wastewater by different combined processes

The degradation of typical dye wastewater is a focus of research in the printing and dyeing industry. In this study, a combined micro-electrolysis and microbial treatment method was established to treat refractory dye wastewater, and the pivotal factors in the microbial treatment were optimized. In the series and coupled modes, the removal rates of chroma reached 98.75% and 92.50%, and the removal rates of chemical oxygen demand (COD) reached 96.17% and 82.29%, respectively. The high-throughput sequencing results showed that the microbial communities in the microbial system varied at different treatment stages. From the culture stage to the domestication stage, the dominant phylum was Proteobacteria; however, the community abundance of microorganisms decreased. A combination of micro-electrolysis and biological methods can alter the characteristics of the microbial community, increase the number of dominant phyla, and increase the abundance of microorganisms. The degradation effect of the series mode and the overall strengthening effect of micro-electrolysis on the microorganisms were better than those of the coupled mode. In actual wastewater, the maximum removal rates of chroma, COD, total nitrogen (TN), ammonia nitrogen (NH3-N), and total phosphorus (TP) are 97.50%, 98.90%, 94.35%, 93.95%, and 91.17%, respectively. Three-dimensional fluorescence spectrum analysis showed that microbial processes could significantly degrade fluorescent components in wastewater, and methanogenic active enzymes in anaerobic processes could continue to react. The combined process can realize the efficient treatment of toxic dye wastewater by reducing the toxicity of wastewater and efficiently degrading organic matter, which has important guiding significance for the treatment of refractory dye wastewater.

Iron-mediated DAMO–anammox process: Revealing the mechanism of electron transfer

The nitrate denitrifying anaerobic methane oxidation–anaerobic ammonia oxidation (DAMO–anammox) can accomplish nitrogen removal and methane (CH4) reduction. This process greatly contributes to carbon emission mitigation and carbon neutrality. In this study, we investigated the electron transfer process of functional microorganisms in the iron-mediated DAMO–anammox system. Fe3+ could be bound to several functional groups (-CH3, COO-, –CH) in extracellular polymeric substance (EPS), and the functional groups bound were different at different iron concentration. Fe3+ underwent reduction reactions to produce Fe2+. Most Fe3+ and Fe2+ react with microorganisms and formed chelates with EPS. Three-dimensional fluorescence spectra showed that Fe3+ affected the secretion of tyrosine and tryptophan, which were essential for cytochrome synthesis. The presence of Fe3+ accelerated c-type cytochrome-mediated extracellular electron transfer (EET), and when more Fe3+ existed, the more cytochrome C expressed. DAMO archaea (M. nitroreducens) in the system exhibited a high positive correlation with the functional genes (resa and ccda) for cytochrome c synthesis. Some denitrifying microorganisms showed positive correlations with the abundance of riboflavin. This finding showed that riboflavin secreted by functional microorganisms acted as an electron shuttle. In addition, DAMO archaea were positively correlated with the hair synthesis gene pily1, which indicated that direct interspecies electron transfer (DIET) may exist in the iron-mediated DAMO–anammox system.

Salinity-mediated enhancement of quaternary ammonium compounds resistance and removal in endophytic bacteria LSE01

The widespread usage of quaternary ammonium compounds (QACs) as disinfectants during the COVID-19 pandemic poses significant environmental risks, such as toxicity to organisms and the emergence of superbugs. In this study, different inorganic salts (NaCl, KCl, CaCl2, MgCl2) were used to induce endophytes LSE01 isolated from hyperaccumulating plants. After five generations of cultivation under 80 g/L NaCl, the minimum inhibitory concentration (MIC) of LSE01 to QACs increased by about 3-fold, while its degradation extent increased from 8% to 84% for C12BDMA-Cl and 5%–89% for C14BDMA-Cl. Transmission electron microscopy (TEM) and three-dimensional fluorescence spectra indicated that the cells induced by high concentration of salt caused plasmolysis and secreted more bound extracellular polymeric substances (B-EPS); these changes are likely to be an important reason for the observed increased resistance and enhanced degradation extent of LSE01 to QACs. Our findings suggest that salt-induction could be an effective way to enhance the resistance and removal of toxic organic pollutants by functional microorganisms.

Impact of stepwisely reducing settling time on the formation and performance of aerobic granular sludge

The impact of gradually reducing the settling time strategy on the formation, performance, and microbial succession of aerobic granular sludge (AGS) was investigated in a sequencing batch reactor (SBR). The results showed that the short settling time accelerated the granulation of AGS and the granulation was completed within 35 d. When the settling time was 10 min, the granular sludge had good settling performance and significant biological activity, and the average particle size and integrity coefficient increased to 1.017 mm and 93.3 %. The shortening of settling time stimulated bacteria to secrete more extracellular polymeric substances (EPS). Three-dimensional fluorescence spectrum analysis showed that aromatic proteins had high fluorescence intensity. According to the analysis of high-throughput sequencing, Rhodanobacter and Klebsiella were the dominant bacteria, and carbohydrate metabolism and amino acid metabolism were significantly enhanced, which may play an important role in maintaining the stability of AGS.

Fluorescence spectroscopy detection of carbendazim residue in cucumber juice based on BC

Excessive residues of the carbendazim pesticide in food will cause food safety issues. Particularly, cucumber is one of the common vegetables with carbendazim residues. This study, using fluorescence spectroscopy technology, explored the residues of carbendazim in cucumbers. First, a fluorescence spectrophotometer was used to scan and obtain the three-dimensional fluorescence spectra of carbendazim standard and four carbendazim formulations. Analyzing and comparing their respective fluorescence characteristics, fluorescence peak 1: Ex/Em=245/300–320 nm and fluorescence peak 2: Ex/Em=280/300–320 nm have been identified as the fluorescence characteristic peaks of carbendazim, and the optimal excitation wavelengths Ex=245 nm and Ex=280 nm with carbendazim specificity was screened. Subsequently, two-dimensional fluorescence spectroscopy was performed on the carbendazim and cucumber-carbendazim mixed solutions using the optimal excitation wavelength. In order to obtain more effective two-dimensional spectral data, the original fluorescence spectrum of the cucumber-carbendazim mixed solution was subjected to Blank Correction (BC), significantly reducing the impact of cucumber's own fluorescent characteristics on the carbendazim fluorescent peak in the mixed solution. Polynomial models and linear prediction models were developed based on the concentration of carbendazim and the fluorescence peak intensity values obtained after BC. The detection limit value of carbendazim residues in the cucumber-carbendazim mixed system included the maximum pesticide residue limit specified by national food safety regulations. This research provides valuable data and technical support for efficient detection of pesticide residues in cucumbers.

Unveiling the molecular interaction of hepatitis B virus inhibitor, entecavir with human serum albumin through computational, microscopic and spectroscopic approaches

Molecular docking, molecular dynamics (MD) simulation, atomic force microscopy (AFM) and multi-spectroscopic techniques were selected to unveil the molecular association between the hepatitis B virus (HBV) inhibitor, entecavir (ETR), and the major blood plasma transporter, human serum albumin (HSA). The entire docking and simulation analyses recognized ETR binding to subdomain IIA (Site I) of HSA through hydrogen bonds, hydrophobic and van der Waals forces while maintaining the complex’s stability throughout the 100 ns. A gradual lessening in the Stern-Volmer quenching constant ( K sv ) with rising temperatures registered ETR-induced quenching of HBV fluorescence as static quenching, thus advising complexation between ETR and HSA. The further advocation of this conclusion was seen from a larger value of the biomolecular quenching rate constant (( kq ) > 1010 M−1s−1), changes in the spectra (UV-Vis absorption) of HSA following ETR inclusion and ETR-induced swelling of HSA in the AFM results. The ETR appeared to bind to HSA with moderate affinity ( K a = 1.87 − 1.19 × 10 4 M−1) at 290, 300 and 310 K. Significant alterations in the protein’s secondary and tertiary structures, including changes in the protein’s Tyr/Trp microenvironment, were also detected by circular dichroism and three-dimensional fluorescence spectra when the protein was bound to ETR. The findings of the drug displacement study backed the docking results of Site I as ETR's preferred binding site in HSA. Communicated by Ramaswamy H. Sarma

Characterization of the interactions between Fulvic acid and Trypsin with Spectroscopic and Molecular Docking technology.

The interaction mechanism between trypsin and fulvic acid was analyzed by multispectral method and molecular docking simulation. The fluorescence spectra showed that fulvic acid induced static quenching of trypsin. The validity of this conclusion was further substantiated through the computation of the binding constants. The thermodynamic parameters show that the reaction is mainly controlled by van der Waals force and hydrogen bond force, and the reaction is spontaneous. In addition, based on the obtained binding distance, there may be a non-radiative energy transfer between the two. The ultraviolet spectrum showed that fulvic acid could shift the absorption peak of trypsin, indicating that fulvic acid had an effect on the secondary structure of trypsin. According to the synchronous fluorescence spectrum results, fulvic acid primarily interacts with tryptophan residues in trypsin and induces alterations in their microenvironment. Three-dimensional fluorescence spectrum and circular dichroism further proves this conclusion. The molecular docking simulation reveals that the interaction between the two groups primarily arises from hydrogen bonding and van der Waals forces. The findings suggest that FA has the ability to induce conformational changes in trypsin's secondary structure.

In vitro inhibitory effect of five natural sweeteners on α-glucosidase and α-amylase.

A promising and efficacious approach to manage diabetes is inhibiting α-glucosidase and α-amylase activity. Therefore, the inhibitory activities of five natural sweeteners (mogrosides (Mog), stevioside (Ste), glycyrrhizinic acid (GA), crude trilobatin (CT), and crude rubusoside (CR)) against α-glucosidase and α-amylase and their interactions were evaluated in vitro using enzyme kinetics, fluorescence spectroscopy, Fourier infrared spectroscopy, and molecular docking. The inhibitor sequence was CT > GA > Ste, as GA competitively inhibited α-glycosidase activity while CT and Ste exhibited mixed inhibitory effects. Compared to a positive control acarbose, the inhibitory activity of CT was higher. For α-amylase, the mixed inhibitors CT, CR, and Mog and the competitive inhibitor Ste effectively inhibited the enzyme, with the following order: CT > CR > Ste > Mog; nevertheless, the inhibitors were slightly inferior to acarbose. Three-dimensional fluorescence spectra depicted that GA, CT, and CR bound to the hydrophobic cavity of α-glucosidase or α-amylase and changed the polarity of the hydrophobic amino acid-based microenvironment and structure of the polypeptide chain backbone. Infrared spectroscopy revealed that GA, CT, and CR could disrupt the secondary structure of α-glucosidase or α-amylase, which decreased enzyme activity. GA, trilobatin and rubusoside bound to amino acid residues through hydrogen bonds and hydrophobic interactions, changing the conformation of enzyme molecules to decrease the enzymatic activity. Thus, CT, CR and GA exhibit promising inhibitory effects against α-glucosidase and α-amylase.

Determination of phenolic compounds in water using a multivariate statistical analysis method combined with three-dimensional fluorescence spectroscopy.

Phenolic compounds are toxic chemical pollutants present in water. Three-dimensional fluorescence spectroscopy analysis is an effective and rapid method for real-time phenol monitoring in aquatic environments. However, similar chemical structures of phenols result in highly overlapping three-dimensional fluorescence spectra. Therefore, it is extremely difficult to analyze and quantify the concentration of components in a mixture system that includes two or more phenolic compounds. In this article, we study the mixed phenol system containing phenol, o-cresol, p-cresol, m-cresol, catechol, and resorcinol combined with excitation-emission matrix (EEM) fluorescence data. A multivariate statistical method called best linear unbiased prediction (BLUP) is proposed to analyze the spectra with the aim to achieve quantitative results and a trilinear decomposition algorithm called parallel factor analysis (PARAFAC) was used for comparison. Two experiments with different calibration samples were set to validate the effectiveness of BLUP through recovery, ARecovery (Average Recovery), AREP (Average Relative Error of Prediction), and RMSE (Root Mean Square Error). Overall, the average recovery of each component in experiment 1 and experiment 2 ranged from 95.91% to 111.62% and 82.91% to 129.02%, respectively. Based on the results of the experiments, the concentration of phenolic compounds in water can be quantitatively determined by combining three-dimensional fluorescence spectroscopy with the BLUP method.

Effect of Chloramphenicol as Antibiotic on the Structure and Function of Pepsin and Its Mechanism of Action.

The interaction between chloramphenicol (CHL) and pepsin (PEP), as well as the impact of CHL on PEP conformation, were investigated using spectroscopic techniques and molecular docking simulations in this study. The experimental results demonstrate that CHL exhibits a static quenching effect on PEP. The thermodynamic parameters indicate that the reaction between CHL and PEP is spontaneous, primarily driven by hydrogen bonding and van der Waals forces. Moreover, the binding distance of r<7 nm suggests the occurrence of Förster's non-radiative energy transfer between these two molecules. In the synchronous fluorescence spectrum, the maximum fluorescence intensity of PEP produced a redshift phenomenon, indicating that CHL was bound to tryptophan residues of PEP. The addition of CHL induces changes in the secondary structure of PEP, as confirmed by the observed alterations in peak values in three-dimensional fluorescence spectra. The UV spectra reveal a redshift of 3 nm in the maximum absorption peak, indicating a conformational change in the secondary structure of PEP upon addition of CHL. Circular dichroism analysis demonstrates significant alterations in the α-helix, β-sheet, β-turn, and random coil contents of PEP before and after CHL incorporation, further confirming its ability to modulate the secondary structure of PEP.

Comparison and Three-Dimensional Fluorescence Spectrum Analysis of Activated Sludge Treatment with Fenton and UV-Fenton.

This study investigated the effects of single Fenton and Fenton and UV combined processes on the cracking degree of anaerobic sludge under the same conditions. The optimal experimental conditions were obtained by repeated determination of Fe2+ dosage, H2O2 dosage and reaction time, so as to achieve the maximum cracking of sludge. In addition, this study applied three-dimensional fluorescence spectrum analysis technology to analyze the organic matter leached from the treated sludge, and different regions of the three-dimensional fluorescence spectra were analyzed and compared for each treatment condition. Repeated experiments showed that the optimal conditions for Fenton are a pH of 3, reaction time of 40 min, 1.4 g/L of Fe2+ and 9 g/L of H2O2. The Fenton process cracking yielded a protein concentration of 0.66 mg/L and sCOD of 5489 mg/L, and the UV-Fenton pretreatment yielded a protein concentration of 0.74 mg/L and sCOD of 5856 mg/L. The sludge particle size was reduced from the original 54.52 mm to 40.30 mm and 36.37 mm, respectively. In addition to these parameters, it was also demonstrated that the Fenton process has a strong cracking effect on sludge by indicators such as the SEM and sludge water content and that UV irradiation can play a role in assisting and helping sludge cracking.

Characteristics of Microplastic-derived Dissolved Organic Matter(MPDOM) and the Complexation Between MPDOM and Sulfadiazine/Cu2

Microplastic-derived dissolved organic matter(MPDOM) during the aging process could be complexed with organic pollutants, heavy metals, and other contaminants and thus affect their migration and transformation. In this study, two types of microplastics, polyethylene terephthalate(PET) and polystyrene(PS), were selected to investigate the spectral properties of MPDOM and their effect on the complexation between MPDOM and sulfadiazine(SDZ)/copper ion(Cu2+) using the fluorescence quenching method, various spectroscopic analysis techniques, and the Ryan-Weber quenching model. The results of UV-vis absorption spectroscopy analysis showed that the molecular weight of the two MPDOMs decreased; the aromaticity and humification increased; and the carboxyl, carbonyl, hydroxyl, and ester substituents on aromatic rings increased after aging. The fluorescence quenching process between MPDOM and SDZ/Cu2+ was static quenching. After quenching, the aromaticity and humification of the two MPDOMs were similar, and the molecular weights were comparable. Combined with three-dimensional fluorescence spectra and parallel factor analysis, two humic-like components and one protein-like component were identified. In addition, the protein-like components of MPDOM reacted preferentially with SDZ and were more sensitive to Cu2+. The results of the Ryan-Weber quenching model revealed that the binding ability of humic-like components to PET-DOM was higher in both SDZ and Cu2+ quenching systems, but the binding ability of MPDOM in the SDZ quenching system was generally stronger than that in the Cu2+ system.

Synthesis, biological evaluation and action mechanism of 7H-[1,2,4] triazolo [3,4-b] [1,3,4] thiadiazine-phenylhydrazone derivatives as α-glucosidase inhibitors

In our work, several 7H-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazine-phenylhydrazone derivatives as α-glucosidase inhibitors (α-GIs) were synthesized and characterized by 1H NMR, 13C NMR, and HRMS spectrum. Then, their bio-activity against the α-glucosidase (α-Glu) was further evaluated. Among them, almost all compounds displayed better bio-activity with IC50 from 31.23 ± 0.89 to 213.50 ± 4.19 μM than acarbose (IC50 = 700.20 ± 10.55 μM). In particular, compound 5o showed the best potency to inhibit α-Glu in a mixed manner. Moreover, the action mechanisms of 5o were further clarified including fluorescence quenching, circular dichroism spectra, three-dimensional fluorescence spectra, molecular docking, etc. All mechanism studies revealed that 5o could arouse the changed secondary structure of α-Glu to hinder enzyme catalytic activity. It was observed from an in vivo study that 5o of 20 mg/kg could significantly decrease by 24.45 % postprandial blood glucose in mice vs. the control. Meanwhile, 5o had low drug-drug interaction potential and was likely to be an orally active compound. Moreover, 5o was observed to be no obvious cytotoxicity to HEK-293 cells. In summary, compound 5o exhibited one potential to be further applied as an antidiabetic drug.

Enhancing anaerobic digestion of waste activated sludge by dielectric barrier discharge pretreatment: Nutrient release, sludge hydrolysis and microbial community succession

A dielectric barrier discharge (DBD) pretreatment of waste activated sludge (WAS) was developed for boosting the releasing of organic matter from floc structures and microbial cells. The changes of protein and polysaccharide in different extracellular polymeric substances layers of SCOD releasing from sludge were determined by using three-dimensional fluorescence spectra. Significantly improved cumulative methane production was achieved via enhancing anaerobic digestion, which was 83.5% higher than that of the control. The formed ∙OH radicals play a key role in sludge hydrolysis, thus improving the biodegradability of WAS. Furthermore, high-throughput sequencing analysis showed that DBD pretreatment improved the relative abundances of the main functional microbes with respect to sludge hydrolysis and anaerobic digestion. Therefore, this study verifies the feasibility of DBD pretreatment in sludge hydrolysis and is expected to provide a practical new technology for anaerobic digestion of WAS.