Three-dimensional Cephalometric Analysis Research Articles

The Reproducibility of Reference Landmarks in the External Acoustic Meatus (EAM) on Cone Beam Computed Tomography (CBCT) Images.

Objective: The aim of the present study is to identify a more reliable reference point in three-dimensional cephalometric analysis to replace the Porion point used in two-dimensional analysis, enhancing the accuracy of assessments. Methods: The methodology assessed potential alternative landmarks for three-dimensional cephalometric analysis. Utilizing a segmenting technique, anatomical landmarks were accurately pinpointed from the external acoustic meatus of 26 Cone Beam Computed Tomography (CBCT) scans. These landmarks were chosen for their clear and unambiguous detectability. To assess reproducibility, each landmark was replicated twice with a one-week interval by a master's student. Reproducibility was quantitatively evaluated by analyzing the absolute difference per axis. Results: Five possible candidate landmarks were identified: the most anterior, posterior, superior, and inferior points of the external acoustic meatus (EAM) and a notch delineating the epitympanic recess. The reproducibility of pinpointing these landmarks ranged from 0.56 mm to 2.2 mm. The absolute mean differences between measurements were 0.46 mm (SD 0.75) for the most anterior point, 0.36 mm (SD 0.44) for the most posterior point, 0.25 mm (SD 0.26) for the most superior point, 1.11 mm (SD 1.03) for the most inferior point, and 0.78 mm (SD 0.57) for the epitympanic notch. Conclusions: The most superior point of the EAM might successfully replace the Porion as an anatomical reference.

Pilot study for three-dimensional cephalometric Enlow's counterpart analysis: Vertical track. Two-dimensional and three-dimensional comparison.

The introduction of cone beam computed tomography (CBCT) in dentistry has given orthodontists the possibility of studying craniofacial structures in three dimensions. Despite the possibility to obtain lateral cephalograms synthesized from CBCT, this approach still does not provide a fully three-dimensional evaluation of the patient's anatomy. While there has been some success in adapting traditional two-dimensional cephalometric analyses to three dimensions, the specific application of Enlow's cephalometric analysis using CBCT remains unexplored. This pilot study aims to introduce a novel approach for performing Enlow's vertical track analysis using CBCT images. Eighteen CBCT images of skeletal Class I (ANB = 2 ± 2) subjects (12 males and 6 females, aged from 9 to 19 years) with no history of previous orthodontic treatment were selected. For each subject, 2D Enlow's vertical track analysis was performed on lateral cephalograms extracted from the CBCT images, and separately, 3D vertical track analysis was directly performed on the CBCT images. To validate the proposed method, we compared the differences between the posterior vertical counterpart (PVC) and the middle vertical counterpart (MVC), as well as between the middle vertical counterpart (MVC) and the anterior vertical counterpart (AVC), as obtained from both the two-dimensional and three-dimensional analyses. The Kolmogorov-Smirnov normality test was applied for each variable to check whether data were normally distributed and a paired Student's t-test was performed. The level of statistical significance was .05. The comparison between three-dimensional PVC-MVC (-0.43 ± 0.37 cm) and two-dimensional PVC-MVC (-0.53 ± 0.36 cm) revealed no statistical difference (P = .27). Similarly, no significant difference (P = .28) was observed between two-dimensional MVC-AVC (-0.56 ± 0.34 cm) and three-dimensional MVC-AVC (-0.47 ± 0.37 cm). The method proposed by this study to realize the vertical track analysis on 3D images is valid and superimposable on that described by Enlow on lateral cephalograms.

Three-dimensional cephalometric analysis of virtual dentoskeletal model

Three-dimensional cephalometric analysis of virtual dentoskeletal model

Definition of New Three-Dimensional Cephalometric Analysis of Maxillomandibular Sagittal Relationship for Orthodontics and Orthognathic Surgery: Normative Data Based on 700 CBCT Scans.

The objective of the study was to define the norm of new 3-dimensional cephalometric analysis of maxillomandibular sagittal relationship with the patient in Natural Head Position. A cross-sectional study was performed using 700 consecutives cone beam computed tomography datasets of pre-orthodontic patients received for three-dimensional craniofacial analysis. To stablish the clinical norm of the new sagittal reference (linear distance A-B), the correlation with the gold standard (ANB angle) was estimated with the Pearson's correlation coefficient. Subsequently, the prognostic values of the linear distance A-B was calculated to define the clinical norm. The sample was composed by 463 women (66.1%) and 237 men (33.9%). The mean age was 30 ± 14,5 years old (range 6-71y old). According to the skeletal class classification (ANB), 46.1% (323) were class I, 42% (294) class II, and 11.9% (83) class III. The regression model found that each additional grade of the ANB angle imply a mean increase of 1.24mm of the distance A-B ( P <0.001). The normative value of the linear distance A-B was obtained through the prognostic values of the distance for the limits of the ANB norm 0 to 4. These values were on the range of 0.52 to 5.48mm. Therefore, the clinical norm for cephalometric maxillomandibular sagittal relationship using linear distance from point A-B is: 3±2.48mm. With this new approach, we can define the skeletal sagittal relationship of the patient in natural head position overcoming the limitations of using intracranial or occlusal plane references improving the diagnosis and orthognathic surgical planning process.

Features of three-dimensional cephalometric analysis according to cone beam computed tomography data in patients with class II malocclusion

The most accurate method of diagnostic examination of an orthodontic patient is cone beam computed tomography (CBCT), which allows measurements in three planes. When conducting cephalometric analysis, it is necessary to evaluate both angular and linear cephalometric parameters to make a diagnosis and plan of orthodontic treatment. Purpose of the study: to determine the main morphometric features of class II malocclusion of the dentoalveolar and gnathic forms and to highlight the most informative cephalometric parameters of three-dimensional analysis based on CBCT data. Materials and methods of research. The material studied was data from 30 CBCT scans, which were studied in the Dolphin Imaging &amp; Management Solutions program. All patients were divided into two groups: the first group consisted of 15 patients with distal occlusion and the first skeletal class, the second group — 15 patients with distal occlusion and the second skeletal class.Results. In patients of the second group, a more posterior position of the lower jaw is noted (the SNB parameter was 77.9±2.93°) against the background of a more anterior position of the upper jaw (the SNA parameter was 83.05±3.10°), as well as an elongation of the base of the upper jaw (CoA parameter was 84.7±0.83 mm) and shortening of the effective length of the lower jaw (Co-Gn parameter was 104±2 mm). Conclusion. In patients with a distal gnathic bite, more pronounced skeletal and dentoalveolar changes are observed. When performing three-dimensional cephalometry, it is necessary to carry out a comprehensive cephalometric analysis with Co-A calculation (total length of the upper jaw), Co-Gn (effective length of the lower jaw)

Mandibular stability and condylar changes following orthognathic surgery in mandibular hypoplasia patients associated with preoperative condylar resorption.

To evaluate postoperative mandibular stability and condylar changes in patients with mandibular hypoplasia and preoperative condylar resorption (CR) undergoing orthognathic surgery. Fifty-four patients were included in this retrospective study. Computed tomography (CT) scans were acquired preoperatively (T0), 2-7days immediate postoperatively (T1), and at least 1year postoperatively (T2). Three-dimensional (3D) cephalometric analysis and measurements of condylar angle, volume, and position (joint spaces) were performed. A 2-mm mandibular relapse was deemed clinically acceptable. We also analyzed the correlations between relapse and postoperative CR and susceptible factors using a multivariate logistic regression model. The results showed one year after the surgery, the average mandibular relapse was 1.0mm (p < 0.05), and the average reduction of condylar volume was 152.4 mm3 (12.7%). Condyle-fossa relationships were improved immediately after the surgery, with a tendency of returning to their original state in the follow-up (p < 0.05). Anteroposterior advancement at point B (B-CP advancement) at T1 and superior joint space (SJS) at T0 were significantly correlated with mandibular relapse, and postoperative CR was mainly associated with vertical increasement at point B (B-AP increasement) at T1. The optimal cut-off values were as follows: 1.6mm for SJS, 4.2mm for B-CP advancement, and 1.8mm for B-AP increasement. Concomitant advancement Genioplasty showed no significant correlation with relapse and postoperative CR. While patients with mandibular hypoplasia and preoperative CR were vulnerable to further condylar resorption after mandibular advancement, the treatment outcomes were generally clinically acceptable. Postoperative relapse was associated with a larger than 4.2mm of mandibular advancement measured at B-CP and a larger than 1.6mm of superior joint space measured at SJS, and postoperative CR was associated with a larger than 1.8mm of mandibular vertical increasement measured at B-AP. The findings of this study suggested that the mandibular advancement might be limited to 5mm for patients with preoperative CR. A concomitant advancement genioplasty might also be considered to achieve a better facial profile in these patients.

A cone beam computed tomography study based on three-dimensional cephalometric analysis of relationships between the lip-line and jaw deformity

ObjectiveThe aim of this study was to use the cone beam computed tomography (CBCT) to study the relationships between the lip-line and mandible deformity. DesignCBCT data of 20 patients with jaw deformity (experimental group) and 20 patients without mandible deformity (control group) were selected. Use three-dimensional cephalometry to measure the reconstructed images of CBCT data simulated by the Materialise Interactive Medical Image Control System (Mimics), mark the related points, lines and planes of the three-dimensional craniomaxillofacial structure, and measure relevant distances and angles. The T-test, Pearson correlation analysis and Linear regression were used to analyze the characteristics of the lip-line and jaw deformity. ResultsThere was a significant difference in the lip-line between mandible deformity group and control group. Significant positive correlations could been found among the lip-line cant, the occlusal plane cant, the mandibular plane cant and the degree of mandible deformity (r=0.964, 0.942, 0.611, P < 0.01). A linear relationship was found between the left lip-line cant Y and the menton deviation X [the mandible deflection to the right was defined as positive, and the left lip-line below frankfort horizontal was viewed as positive] as Y= 0.340 + 0.505X. ConclusionsThe lip-line of patients with jaw deformity was inclined, and the lip-line cant was positively correlated with the degree of mandible deformity, and there was a certain linear relationship between the two, which could provide a theoretical reference for clinicians to diagnose and treat patients with mandible deformity.

Three-Dimensional Cephalometric Analysis of Skeletal and Dental Effects in Patients Undergoing Transpalatal Distraction

The present study aimed to assess dental and skeletal effects after transpalatal distraction using 3D cephalometry methodology. The study group comprised 34 patients (mean age 27.7 years) who were diagnosed with transverse skeletal maxillary deficiency of at least 7 mm. Computed tomography scans were obtained before surgical procedure (T1), after completion of expansion (T2) and at 6-month follow-up (T3). Computed tomography scans were imported into Dolphin Imaging software version 11.7 (Chatsworth, CA, USA). Three-dimensional skull models were oriented according to the Frankfurt horizontal plane, midsagittal plane (passing through the skeletal nasion) and frontal plane (passing through the right and left porion). Cephalometric landmarks related to skeletal, and dental structures were traced and linear and angular measurements were calculated. Following transpalatal distraction N-ANS and S-PNS distances increased by 1.27 mm and 0.54 mm, respectively. Skeletal expansion at the canine region (ARCR-ARCL) was 8.43 mm at T2 and 6.39 mm at T3. Expansion at the distal part of the maxilla (ARMR-ARML) was 5.95 mm at T2 and 4.81 mm after retention. The highest increase in maxillary arch width at T2 was observed at canines (8.74 mm), lower at premolars (8.33 mm) and the lowest at molars (6.76 mm). There is no anteroposterior movement of maxilla following transpalatal distraction; however, the maxilla shifts downward which is particularly marked anteriorly. Skeletal and dental expansion in the transversal plane occurs in a V-shaped manner, with more expansion at the anterior part of the maxilla.

A three-dimensional cephalometric analysis of Japanese adults and its usefulness in orthognathic surgery: A retrospective study

This study aimed to establish a three-dimensional (3D) cephalometric analysis of craniofacial morphology and discuss its theoretical usefulness in orthognathic patients.Cone-beam computed tomography (CBCT) images of Japanese subjects with skeletal Class I malocclusion before treatment were selected from among 1000 patients so that samples matched a historic 2D cephalometric cohort with normal occlusion using propensity score matching. In each CBCT image, 67 3D measurements were calculated based on manually identified landmarks. The mean and standard deviation of the measurements were calculated and used as the normative range for each sex. To confirm the usefulness of the 3D measurements, pre- and post-treatment CT data of nine jaw deformity patients who underwent orthognathic surgery with two-dimensional planning (2DP) in the past were used. Pre- and post-treatment CT values were evaluated with a paired t-test as well as a Z-score, which was calculated using the aforementioned normative range, and then categorized into five groups (“deteriorated”, “no improvement”, “over-treatment”, “no change”, “improvement”) with −1 < Z-score < 1 considered normal.Fifty-six patients were matched to normal skeletal 1 subjects. The normative range of 67 items indicating 3D craniofacial morphology of the Japanese was calculated. Postoperatively, the horizontal position of the pogonion to the mid-sagittal plane significantly decreased (p = 0.043) and “improved”; however, the ramus axis on the right side significantly increased (p = 0.005) and “deteriorated”. Maxillary yaw and the horizontal position of the gonion also tended to “deteriorated”.The normative range for the 3D cephalometric analysis in Japanese has been established. Given findings of deteriorated maxillomandibular yawing after surgery when using conventional 2DP, 3D cephalometric measurements should be used when planning jaw positions after surgery for orthognathic patients.

PSI-Guided Mandible-First Orthognathic Surgery: Maxillo-Mandibular Position Accuracy and Vertical Dimension Adjustability.

In orthognathic surgery, patient-specific osteosynthesis implants (PSIs) represent a novel approach for the reproduction of the virtual surgical planning on the patient. The aim of this study is to analyse the quality of maxillo-mandibular positioning using a hybrid mandible-first mandibular-PSI-guided procedure on twenty-two patients while the upper maxilla was fixed using manually bent stock titanium miniplates. The virtual surgical plan was used to design PSIs and positioning guides, which were then 3D printed using biocompatible materials. A Cone Beam Computed Tomography (CBCT) scan was performed one month after surgery and postoperative facial skeletal models were segmented for comparison against the surgical plan. A three-dimensional cephalometric analysis was carried out on both planned and obtained anatomies. A Spearman correlation matrix was computed on the calculated discrepancies in order to achieve a more comprehensive description of maxillo-mandibular displacement. Intraoperatively, all PSIs were successfully applied. The procedure was found to be accurate in planned maxillo-mandibular positioning reproduction, while maintaining a degree of flexibility to allow for aesthetics-based verticality correction in a pitch range between −5.31 and +1.79 mm. Such a correction did not significantly affect the achievement of planned frontal symmetry.

Three-Dimensional Cephalometric Landmarking and Frankfort Horizontal Plane Construction: Reproducibility of Conventional and Novel Landmarks.

In some dentofacial deformity patients, especially patients undergoing surgical orthodontic treatments, Computed Tomography (CT) scans are useful to assess complex asymmetry or to plan orthognathic surgery. This assessment would be made easier for orthodontists and surgeons with a three-dimensional (3D) cephalometric analysis, which would require the localization of landmarks and the construction of reference planes. The objectives of this study were to assess manual landmarking repeatability and reproducibility (R&R) of a set of 3D landmarks and to evaluate R&R of vertical cephalometric measurements using two Frankfort Horizontal (FH) planes as references for horizontal 3D imaging reorientation. Thirty-three landmarks, divided into “conventional”, “foraminal” and “dental”, were manually located twice by three experienced operators on 20 randomly-selected CT scans of orthognathic surgery patients. R&R confidence intervals (CI) of each landmark in the -x, -y and -z directions were computed according to the ISO 5725 standard. These landmarks were then used to construct 2 FH planes: a conventional FH plane (orbitale left, porion right and left) and a newly proposed FH plane (midinternal acoustic foramen, orbitale right and left). R&R of vertical cephalometric measurements were computed using these 2 FH planes as horizontal references for CT reorientation. Landmarks showing a 95% CI of repeatability and/or reproducibility > 2 mm were found exclusively in the “conventional” landmarks group. Vertical measurements showed excellent R&R (95% CI < 1 mm) with either FH plane as horizontal reference. However, the 2 FH planes were not found to be parallel (absolute angular difference of 2.41°, SD 1.27°). Overall, “dental” and “foraminal” landmarks were more reliable than the “conventional” landmarks. Despite the poor reliability of the landmarks orbitale and porion, the construction of the conventional FH plane provided a reliable horizontal reference for 3D craniofacial CT scan reorientation.

Three-dimensional analysis of lip soft tissue changes and related jaw changes in patients with skeletal class III malocclusion and facial asymmetry.

To investigate three-dimensional soft tissue changes of lips and related jaw changes in patients with skeletal class III malocclusion and facial asymmetry using cone-beam computerized tomography (CBCT). This study included 46 CBCT scans of patients with aforementioned character before (T1) and 6-12 months after orthognathic surgery (T2). Subjects were divided into 2 groups according to two types of orthognathic surgery namely, the one-jaw surgery group who underwent bilateral sagittal splint ramus osteotomy (BSSRO) and the two-jaw surgery group who underwent Le Fort I osteotomy and BSSRO. Mimics 19.0 software are used for model reconstruction, landmark location and three-dimensional cephalometric analysis. Descriptive statistics and correlation analyses are used to investigate jaw hard tissue and lip soft tissue changes. In one-jaw group, the mandible shows changes in contour and position (p < 0.05), and the surgery causes changes of lip structure on the deviated side. While in two-jaw group, jaws only show changes in spatial position, and surgery changes contour of bilateral lips and nasolabial angle (p < 0.05). At the same time, lip symmetry increases significantly in both groups postoperatively. Orthognathic surgery can improve lip aesthetics in patients with skeletal class III malocclusion and facial asymmetry. However, changes induced by two surgical approaches are different. Surgeons should have a clear acquaintance with this difference to deal with different situations.

Cone-beam Computed Tomography-based three-dimensional cephalometric analysis of mandible symmetry and the occlusal plane of adult patients with high-angle skeletal class III malocclusion and jaw deformity

ObjectiveTo use cone beam computed tomography (CBCT) scans to analyze mandibular symmetry, the occlusal plane and their correlations in patients with high-angle skeletal class III malocclusion and jaw deformity. DesignReconstructed images simulated of CBCT data of 20 adult patients with high-angle skeletal class III malocclusion and jaw asymmetry (Experimental group) and 20 adult patients of skeletal class I with normal faces (Control group) were measured with a three-dimensional (3D) geometric morphological measurement system. Related landmarks, lines and planes were marked and relevant distances and angles of 3D craniofacial structures were measured. The Student t-test was performed to assess symmetry. With the help of the Pearson correlation and Linear regression, we explored the correlations and other relationships among them. ResultsCompared with control group, the symmetrical differences in experimental group were concentrated in condyle, coracoid process, mandibular angle, mandibular first molar area and the chin (P < 0.05). A strong positive correlation was found between the degree of mandibular deviation and the inclination of the occlusal plane in the coronal position (r = 0.860, P < 0.001) and a linear relationship between them was found: Y = 1.300 + 0.419X (the inclination of occlusal plane was Y, and the mandibular deviation was X). ConclusionsCertain characteristics of mandibular symmetry and the occlusal plane were found in patients with high-angle skeletal class III malocclusion and jaw asymmetry. These findings provide references for doctors to pay attention to the degree and location of mandibular asymmetry and to determine the occlusal plane.

DL-inferencing for 3D Cephalometric Landmarks Regression task using OpenVINO

In this paper, we evaluate the performance of the Intel Distribution of OpenVINO toolkit in practical solving of the problem of automatic three-dimensional Cephalometric analysis using deep learning methods. This year, the authors proposed an approach to the detection of cephalometric landmarks from CT-tomography data, which is resistant to skull deformities and use convolutional neural networks (CNN). Resistance to deformations is due to the initial detection of 4 points that are basic for the parameterization of the skull shape. The approach was explored on CNN for three architectures. A record regression accuracy in comparison with analogs was obtained. This paper evaluates the perfor- mance of decision making for the trained CNN-models at the inference stage. For a comparative study, the computing environments PyTorch and Intel Distribution of OpenVINO were selected, and 2 of 3 CNN architectures: based on VGG for regression of cephalometric landmarks and an Hourglass-based model, with the RexNext backbone for the land- marks heatmap regression. The experimental dataset was consist of 20 CT of patients with acquired craniomaxillofacial deformities and was in- clude pre- and post-operative CT scans whose format is 800x800x496 with voxel spacing of 0.2x0.2x0.2 mm. Using OpenVINO showed a great increase in performance over the PyTorch, with inference speedup from 13 to 16 times for a Direct Regression model and from 3.5 to 3.8 times for a more complex and precise Hourglass model.

Three-Dimensional Cephalometric Analysis: The Changes in Condylar Position Pre- and Post-Orthognathic Surgery With Skeletal Class III Malocclusion

The study includes 21 adult patients with skeletal class III malocclusion who underwent orthognathic surgery and had computed tomography images records presurgery (T0) up to 6 months after the surgery (T1). The computed tomography images were analyzed three-dimensionally using the Proplan CMF 3.0 software. Different skeletal and dental parameters were used in analyzing the cephalometric analysis of the patients. The change in the condylar axis angle was evaluated on 3 planes: axial, coronal, and sagittal. The anteroposterior position of the condyle in relation to the glenoid fossa was evaluated in the sagittal plane. ∠SNB, ∠ANB, ∠Left Y-axis, ∠Right Y-axis were statistically significant (P < 0.01). Significant differences on the condylar axis angle were found between the groups on the sagittal plane (P < 0.05) whereas no significant differences were noted on the axial and the coronal plane. In the anteroposterior condylar position related to the glenoid fossa, the condyle exhibited different displacement on different condyles. The right condyle exhibited more of the posterior displacement whereas the left condyle exhibited more of anterior displacement of the condyle in relation to the glenoid fossa. Numerous studies have done regarding the changes after postsurgery using the two-dimensional cephalometric analysis. Using the 3D techniques helps us to identify the cephalometric point more accurately which thus enhances the accuracy in the cephalometric analysis. However, care should be taken not to change the axis of rotation of the condyle to prevent from the treatment relapse and to avoid temporo-mandibular disorders.

Cephalometric Landmark Regression with Convolutional Neural Networks on 3D Computed Tomography Data

In this paper, we address the problem of automatic three-dimensional cephalometric analysis. Cephalometric analysis performed on lateral radiographs doesn’t fully exploit the structure of 3D objects due to projection onto the lateral plane. With the development of three-dimensional imaging techniques such as CT, several analysis methods have been proposed that extend to the 3D case. The analysis based on these methods is invariant to rotations and translations and can describe difficult skull deformation, where 2D cephalometry has no use. In this paper, we provide a wide overview of existing approaches for cephalometric landmark regression. Moreover, we perform a series of experiments with state of the art 3D convolutional neural network (CNN) based methods for keypoint regression: direct regression with CNN, heatmap regression and Softargmax regression. For the first time, we extensively evaluate the described methods and demonstrate their effectiveness in the estimation of Frankfort Horizontal and cephalometric points locations for patients with severe skull deformations. We demonstrate that Heatmap and Softargmax regression models provide sufficient regression error for medical applications (less than 4 mm). Moreover, the Softargmax model achieves 1.15° inclination error for the Frankfort horizontal. For the fair comparison with the prior art, we also report results projected on the lateral plane.

Three-dimensional acquisition technologies for facial soft tissues – Applications and prospects in orthognathic surgery

The management of patients with dento-maxillofacial deformities is based on assessments of the dental occlusion – facial skeleton – soft tissues triad. As societal demands and surgical practices have evolved, facial soft tissues have moved to the forefront of considerations in orthognathic surgery. Techniques are therefore required to analyze facial soft tissues objectively and reproducibly, for diagnosis, preoperative planning, and follow-up. Several technologies are currently capable of providing three-dimensional (3D) models of the face, either by 3D reconstruction of traditional computed tomography or cone beam computed tomography data, or directly by stereophotogrammetry, laser scanning or structured light scanning. Multimodal image registration techniques allow bone base, dental occlusion and facial soft tissue information to be combined in a 3D virtual patient. Three-dimensional cephalometric analysis of the facial skeleton and skin is now perfectly integrated in virtual planning and is gradually gaining in automation and accuracy. Photorealistic 3D simulations allow optimal soft tissue planning and facilitate physician-patient communication. Finally, these facial modeling techniques facilitate post-operative studies of soft tissues, which generally involve comparisons of volumetric data. There are many research avenues to pursue and technical improvements are to be expected, particularly through the development of big data and artificial intelligence approaches.

Relationship between pterygomaxillary fissure morphology and maxillary/mandibular position : A cone beam computed tomography assessment.

The aim of this study was to investigate the possible correlation between maxillary and mandibular positioning via cephalometric analysis with pterygomaxillary fissure (PMF) morphology using cone beam computed tomography (CBCT). In this study, CBCT images from 825 individuals (448 female, 377 male; age range was 18-91years with this cohort) were analyzed; PMF length and width were measured. Three-dimensional cephalometric analysis was also performed using cephalometric analysis software. The landmarks and measurements in relation to maxillary and mandibular positions were identified and performed for the cephalometric analysis. Analysis of variance (ANOVA) was used for comparison of the parameters, while the Bonferroni test was used for multiple comparisons. Pearson's test was also used to assess the correlations between the parameters. The results showed that males had significantly larger PMF length (p < 0.001) and width (p < 0.001) compared to females. The mean PMF length was 17.7 mm (standard deviation [SD]3.2 mm) for right and 17.7 mm (SD3.3 mm) for left but were not significantly different (p > 0.05). In terms of the cephalometric measurements, asignificant correlation was found between upper central incisor (U1toAperp2D) and posterior facial height (PostFaceHtSGo2D) and PMF length, while correlations were found between PMF width and several cephalometric parameters such as lower lip (LwLiptoEPln2D and LwLiptoHLine2D) and occlusal plane (OPtoFHAng2D) (p < 0.05). Asignificant relationship was observed between PMF morphology and the position of the maxilla or mandible. PMF lengths and widths were larger in males than females. Posteroanterior maxillary and mandibular lengths and posterior facial height are associated with PMF length and width.

Computer-Aided Planning in Orthognathic Surgery: A Comparative Study with the Establishment of Burstone Analysis-Derived 3D Norms.

Three-dimensional (3D) computer-aided simulation has revolutionized orthognathic surgery treatment, but scarce 3D cephalometric norms have been defined to date. The purposes of this study were to (1) establish a normative database of 3D Burstone cephalometric measurements for adult male and female Chinese in Taiwan, (2) compare this 3D norm dataset with the two-dimensional (2D) Burstone norms from Caucasian and Singaporean Chinese populations, and (3) apply these 3D norms to assess the outcome of a computer-aided simulation of orthognathic surgery. Three-dimensional Burstone cephalometric analysis was performed on 3D digital craniofacial image models generated from cone-beam computed tomography datasets of 60 adult Taiwanese Chinese individuals with normal occlusion and balanced facial profile. Three-dimensional Burstone analysis was performed on 3D image datasets from patients with skeletal Class III pattern (n = 30) with prior computer-aided simulation. Three-dimensional Burstone cephalometric measurements showed that Taiwanese Chinese males had significantly (p < 0.05) larger anterior and posterior facial heights, maxillary length, and mandibular ramus height than females, with no significant (p > 0.05) difference for facial soft-tissue parameters. The 3D norm dataset revealed Taiwanese Chinese-specific facial characteristics, with Taiwanese presenting (p < 0.05) a more convex profile, protrusive maxillary apical bases, protruding mandible, protruding upper and lower lips, and a shorter maxillary length and lower facial height than Caucasians. Taiwanese had significantly (p < 0.05) larger maxillary projection, vertical height ratio, lower face throat angle, nasolabial angle, and upper lip protrusion than Singaporean Chinese. No significant (p > 0.05) difference was observed between 3D norms and computer-aided simulation-derived 3D patient images for horizontal skeletal, vertical skeletal, and dental measurements, with the exception of two dental parameters (p < 0.05). This study contributes to literature by providing gender- and ethnic-specific 3D Burstone cephalometric norms, which can assist in the multidisciplinary-based delivery of orthodontic surgical care for Taiwanese Chinese individuals worldwide, including orthodontic management, computer-assisted simulation, and outcome assessment.

Comparison of a tridimensional cephalometric analysis performed on 3T-MRI compared with CBCT: a pilot study in adults

ObjectiveSince the introduction of cone-beam computed tomography (CBCT) in dentistry, this technology has enabled distortion-free three-dimensional cephalometric analysis for orthodontic and orthognathic surgery diagnosis. However, CBCT is associated with significantly higher radiation exposure than traditional routine bidimensional examinations for orthodontic diagnosis, although low-dose protocols have markedly reduced radiation exposure over time.The objective of this preliminary feasibility study is to compare the accuracy and diagnostic capabilities of an already-validated three-dimensional cephalometric analysis on CBCT to those of an analysis on 3-T magnetic resonance imaging (3T-MRI) to assess whether the latter can deliver a comparable quality of information while avoiding radiation exposure.Materials and methodsIn order to test the feasibility of three-dimensional cephalometry on 3T-MRI, 18 subjects (4 male; 14 female) with mean age 37.8 ± SD 10.2, who had undergone both maxillofacial CBCT and maxillofacial 3T-MRI for various purposes within 1 month, were selected from the archive of the Department of Dentistry and Maxillofacial Surgery of Fondazione Ospedale Policlinico Maggiore, IRCCS, Milano, Italy.A three-dimensional cephalometric analysis composed of ten midsagittal and four bilateral landmarks and 24 measurements (11 angular, 13 linear) was performed on both scans using Mimics Research® v. 17.0 (NV, Technologielaan 15, 3001 Leuven, Belgium). Cephalometric analysis was performed twice by two independent orthodontists for each scan, and each orthodontist repeated the measurements 3 weeks later. Statistical analysis was performed with SPSS® 20.00 for Windows (IBM® Corporation, Sommers, NY, USA). A Bland-Altman test for each cephalometric value was performed to assess the agreement between the procedures. The intraclass correlation coefficient (ICC) was used to assess interobserver and intraobserver reliability. The coefficient of variation was used to evaluate precision.ResultsBoth procedures showed good reliability, with mean intraobserver ICCs of 0.977/0.971 for CBCT and 0.881/0.912 for MRI. The average interobserver ICCs were 0.965 for CBCT and 0.833 for MRI. A Bland-Altman analysis for the cephalometric tracing revealed a similar range of agreement between the two modalities; the bias range (mean ± SD) was − 0.25–0.66 mm (0.174 ± 0.31) for distances and − 0.41–0.54° (0.12 ± 0.33) for angles.ConclusionsWithin the main limitation of this pilot study, that is, the small sample, it is possible to state that cephalometric measurements on 3T-MRI seem to possess adequate reliability and repeatability and that they show satisfying agreement with values measured on CBCTs. An MRI examination does not expose patients to ionizing radiation and could provide an alternative to CBCT for three-dimensional cephalometrics in the future.