Thiol Form Research Articles

Nickel(II) complexes of novel thiosemicarbazone compounds: Synthesis, characterization, molecular modeling and in vitro antimicrobial activity

A series of novel thiosemicarbazone compounds, HL 1 , 2-(1-(2-phenyl-hydrazono)-propan-2-ylidene)hydrazine-carbothioamide (TPHP), HL 2 , N -methyl-2-(1-(2-phenyl-hydrazono)-propan-2-ylidene)hydrazinecarbothioamide (MTPHP) and, HL 3 , N -phenyl-2-(1-(2-phenyl-hydrazono)-propan-2-ylidene)hydrazinecarbothioamide (PTPHP) and their Ni(II) complexes have been synthesized and characterized using elemental analysis, magnetic susceptibility, molar conductance and spectral measurements. IR spectra indicate that the free ligands exist in the thione form rather than thiol form in the solid state. In all the studied complexes, all ligands behave as a tridenate anion with coordination involving the two azomethine nitrogens and the thiolate sulfur after deprotonation. The magnetic and spectral data indicates a square planar geometry for Ni(II) complexes. The structures of the free thiosemicarbazone ligands and their Ni(II) complexes have been modelled using parameterized PM3 semiempirical method. The free ligands and their Ni(II) chelates have been screened for their antimicrobial activities.

Atrazine-Based Self-Assembled Monolayers and Their Interaction with Anti-Atrazine Antibody: Building of an Immunosensor

As a part of our objective to build an immunosensor for the detection of the pesticide atrazine (ATZ) in environmental samples, we studied the self-assembling process of the disulfide derivative of the pesticide atrazine on a gold substrate. Atrazine-based self-assembled monolayers were characterized by ellipsometry, scanning tunneling microscopy, polarization-modulation infrared reflection-absorption spectroscopy (PM IRRAS), X-ray photoelectron spectroscopy and quartz crystal microbalance (QCM) measurements. Two different time constants for the adsorption process were observed, depending on the experimental method used. The QCM data reflect adsorption kinetics of the original disulfide compound, whereas ellipsometry and ex situ PM IRRAS refer to the formation of thiolate (ATZS) monolayers. In situ QCM data demonstrated the suitability of such monolayers for the detection of atrazine in aqueous samples. Exposure of the ATZS sensing surface to an anti-atrazine antibody (anti-ATZ IgG) resulted in complete coverage of the surface by antibody, whereas approximately half of the antibody molecules were displaced from the QCM sensor surface by further addition of atrazine into the solution.

Synthesis, Characterization, and Antimicrobial Activity oF The Ligand 3-Methylpyrazole- 4-Carboxaldehyde Thiosemicarbazone and Its Pd(II) Complex

The synthesis and characterization of a new palladium(II) complex [Pd(MePhPzTSC)2] and its corresponding ligand 3-methylpyrazole-4-carboxaldehyde thiosemicarbazone (MePhPzTSC) are described. The bidentate ligand is coordinated to Pd(II) through the azomethine nitrogen atoms and sulfur in the form of thiol by deprotonation of the NH-C = S. The antimicrobial activity of these new compounds was evaluated against gram-negative (Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa) and gram-positive (Staphylococcus aureus and Bacillus thuringiensis) bacteria and two yeast strains (Candida albicans and Saccharomyces cerevisiae). Coordination of the ligand to the metallic ion showed improved antimicrobial activity compared to the free ligand. For the gram-positive bacteria the antimicrobial activity of the complex was higher than that of the positive control used. [Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the following free supplemental files: Additional figures and tables]

Characterization of the reaction products, kinetics and mechanism of oxidation of the drug captopril by platinum(iv) complexes

Captopril, the first pharmaceutical drug designed, synthesized, and used primarily for the treatment of hypertension and congestive heart failure, is an angiotensin-converting-enzyme inhibitor and is also an antioxidant. On the other hand, the kinetic and mechanistic aspects for the oxidation of captopril are not well understood. The oxidation of captopril by cisplatin prodrug and a model compound, cis-[Pt(NH3)2Cl4] and trans-[PtCl2(CN)4]2−, was thus investigated in this work. A stopped-flow spectrometer was employed to follow the oxidation kinetics over a wide pH-range under the pseudo first-order conditions of [captopril] ≫ [Pt(IV)]. The oxidation by the Pt(IV) complexes displayed a second-order character, first-order each in [Pt(IV)] and in [captopril], whereas the metal-ion-catalyzed autooxidation made a very minor contribution to the overall kinetics in acidic media and was negligible in neutral media. Captopril was oxidized to form the captopril-disulfide as identified by ESI mass spectrometry under the conditions of the kinetic measurements. In the proposed reaction mechanism, the Pt(IV) complexes are reduced by the three protolytic captopril species in parallel as rate-determining steps, generating reactive species of chlorothiol and/or sulfenylchloride. The reactive species will be rapidly trapped, either directly or indirectly, by another molecule of captopril to form captopril-disulfide. The rate constants for the rate-determining steps have been derived, demonstrating that the fully deprotonated captopril is about 105 to 106 times more reactive than its corresponding thiol form toward the Pt(IV) complexes.

Heavy-Metal Content and Oxidative Damage in Hypsiboas faber: The Impact of Coal-Mining Pollutants on Amphibians

It has been identified worldwide that amphibians are experiencing massive population declines. This decrease could be further enhanced by the exposure of amphibians to pollutants, which would enhance reactive oxygen species production and cause subsequent alterations in oxidant defense levels. The present study was aimed at understanding the impact of mineral coal on amphibians. For this purpose, chemical elemental contents and oxidative stress indexes in Hypsiboas faber from coal-mining areas and in an unpolluted area in the Catarinense Coal Basin, Brazil, were assessed. The highest contents of sulfur, chlorine, iron, zinc, and bromine were registered in specimens from the coal-mining area, whereas the highest contents of potassium calcium, and silicon were registered in specimens from the control area. It was found that there was a significant increase (p<0.05) in the activity of super oxide dismutase (SOD) and glutathione peroxidase (GPx) in the animals from the coal-mining area, whereas the level of catalase showed no differences between the animal groups. The levels of TBARS showed no differences between the tested groups. However, carbonylation decreased significantly (p<0.05) in animals from the coal-mining area, and there was a significant increase (p<0.05) in the formation of total thiols in animals from the coal-mining area. In conclusion, the antioxidant system of H. faber is sensitive to pollutants present in coal-mining wastes, and its SOD and GPx activity may be a potential biomarker for monitoring the level of contaminants in the environment.

Comparison between the effects of diallyl tetrasulfide on human retina pigment epithelial cells (ARPE-19) and HCT116 cells

BackgroundDiallyl mono- and polysulfanes from garlic are known to induce an adaptive cell response and the formation of antioxidants in cancer cells. In the case of a severe ER stress and a failure in the response, cancer cells eventually go into apoptosis. Only little is known about the response of normal cells upon treatment. MethodsNormal ARPE-19 cells were treated with diallyl tetrasulfide to study their cellular response and the results were compared with those of HCT116 cancer cells. Cell viability was checked by an MTT assay and cytofluorimetry. The formation of superoxide radicals, H2O2 and thiols were determined and proteins involved in the ER stress response were also detected by Western blot analysis. ResultsWe found that diallyl tetrasulfide induced reactive oxygen species (ROS) in normal cells similar to cancer cells in a time (0 to 60min) and dose dependent manner (0 to 50μM). The level of heme oxigenase-1 (HO-1) was up-regulated in both cell types. Initially, we found a decrease in the total thiol level in both cell types but in contrast to cancer cells, normal cells recovered from the decrease in the total thiol concentration within 60min of treatment. ConclusionsThe recovery of the thiol concentration in normal cells treated with diallyl tetrasulfide seems to be responsible for the failure to induce the ER stress signalling pathway and finally apoptosis in normal cells. General SignificanceThe difference in the recovery of the thiol status might be an explanation for the anti-carcinogenic effects of garlic compounds.

Synthesis, spectral and structural characterization of Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) complexes with 2-mercapto-5-methyl-1,3,4-thiadiazole: A Zn(II) complex acting as a new sensitive and selective fluorescent probe for the detection of Hg2+ in H2O–MeOH medium

Five new complexes, [Ni(mthd)2(py)2] (1), [Cu(en)2](mthd)2 (2), [H2en][Hg(mthd)3]2·2H2O (3), [Cd(mthd)2(o-phen)2]2·H2O (4) and [Zn(mthd)2(bpy)] (5) (Hmthd=2-mercapto-5-methyl-1,3,4-thiadiazole), have been synthesized. All the complexes have been fully characterized by various techniques: elemental analyses, IR, electronic and fluorescent spectral data. The ligand is present in the deprotonated thiol form in the complexes [Cu(en)2](mthd)2 (2) and [Cd(mthd)2(o-phen)2]2·H2O (4). In complex 2, the ligand is ionically bonded, whereas it is covalently bonded through the sulfur in complex 4. In [Ni(mthd)2(py)2] (1) the ligand is N,S chelating bidentate bonded through the thiol sulfur and the thiadiazole ring nitrogen adjacent to it, forming a four membered chelate ring. The ligand is covalently bonded through the deprotonated thiadiazole ring nitrogen adjacent to the thiol sulfur in [Zn(mthd)2(bpy)] (5). The complex anion in [H2en][Hg(mthd)3]2·2H2O (3) has a triangular planar geometry, with bonding through the deprotonated thiolato sulfur atoms from the three ligands. [Zn(mthd)2(bpy)] (5) is highly fluorescent as compared to the other complexes and has been further used as a metal probe for sensing of Hg2+ in H2O–MeOH solution. Complex 5, upon interaction with Hg2+, shows a hypochromic shift in the absorption spectra whereas the emission spectra exhibited 75% quenching fluorescence behavior. The electrochemical studies also suggest the interaction of Hg(II) with the Zn(II) complex, probably via the free thione sulfur.

Higher alcohols from syngas using a K/Ni/MoS2 catalyst: Trace sulfur in the product and effect of H2S-containing feed

Two types of experiments have been performed related to the higher alcohol synthesis from syngas over a K–Ni–MoS2 catalyst which beforehand has been operated for 1000h on stream in sulfur-free syngas. In the first experimental part, sulfur-free syngas was used as feed and the condensed liquid product was found to contain 67ppmw sulfur, while the sulfur concentration in the gas was 19ppmv. The gas phase was found to contain mainly COS and H2S, while the liquid phase contained methanethiol (13.8ppmwS), ethanethiol (10.6ppmwS), dimethyl sulfide (21.3ppmwS), ethyl methyl sulfide (12.2ppmwS), unidentified sulfur compounds (7.9ppmwS) together with some dissolved COS (0.5ppmwS) and H2S (1.2ppmwS).In the second experimental part, the effect of feeding syngas containing 170ppm H2S compared to a sulfur-free syngas was studied, while all products were carefully monitored online. The presence of H2S in the syngas was found to increase CO conversion, but the largest change was found in product selectivity. The hydrocarbon selectivity greatly increased at the expense of alcohol selectivity, while the alcohol distribution shifted towards longer alcohols (increased C2+OH/MeOH ratio). From product yields it became clear that most of the increased CO conversion with H2S in the feed was due to increased methane formation (and CO2 formation due to the water–gas shift reaction). The presence of H2S in the feed greatly increased the concentration of all sulfur compounds. Together with COS, formation of thiols (methanethiol and ethanethiol) was especially favored by the presence of H2S. The thioether concentration also increased, however, to a much lower extent.

Evaluation of DNA-binding, DNA cleavage, antioxidant and cytotoxic activity of mononuclear ruthenium(II) carbonyl complexes of benzaldehyde 4-phenyl-3-thiosemicarbazones

Two 4-phenyl-3-thiosemicarbazone ligands, (E)-2-(2-chlorobenzylidene)-N-phenylhydrazinecarbothioamide (HL1) and (E)-2-(2-nitrobenzylidene)-N-phenylhydrazinecarbothioamide (HL2), and its ruthenium(II) complexes were synthesized and characterized by physico-chemical and spectroscopic methods. The Schiff bases act as bidentate, monobasic chelating ligands with S and N as the donor sites and are preferably found in the thiol form in all the complexes studied. The molecular structure of HL1 and HL2 were determined by single crystal X-ray diffraction method. DNA binding of the compounds was investigated by absorption spectroscopy which indicated that the compounds bind to DNA via intercalation. The oxidative cleavage of the complexes with CT-DNA inferred that the effects of cleavage are dose dependent. Antioxidant study of the ligands and complexes showed significant antioxidant activity against DPPH radical. In addition, the in vitro cytotoxicity of the ligands and complexes assayed against HeLa and MCF-7 cell lines showed higher cytotoxic activity with the lower IC50 values indicating their efficiency in killing the cancer cells even at low concentrations.

Identification of Pharmacological Modulators of HMGB1-Induced Inflammatory Response by Cell-Based Screening

High mobility group box 1 (HMGB1), a highly conserved, ubiquitous protein, is released into the circulation during sterile inflammation (e.g. arthritis, trauma) and circulatory shock. It participates in the pathogenesis of delayed inflammatory responses and organ dysfunction. While several molecules have been identified that modulate the release of HMGB1, less attention has been paid to identify pharmacological inhibitors of the downstream inflammatory processes elicited by HMGB1 (C23-C45 disulfide C106 thiol form). In the current study, a cell-based medium-throughput screening of a 5000+ compound focused library of clinical drugs and drug-like compounds was performed in murine RAW264.7 macrophages, in order to identify modulators of HMGB1-induced tumor-necrosis factor alpha (TNFα) production. Clinically used drugs that suppressed HMGB1-induced TNFα production included glucocorticoids, beta agonists, and the anti-HIV compound indinavir. A re-screen of the NIH clinical compound library identified beta-agonists and various intracellular cAMP enhancers as compounds that potentiate the inhibitory effect of glucocorticoids on HMGB1-induced TNFα production. The molecular pathways involved in this synergistic anti-inflammatory effect are related, at least in part, to inhibition of TNFα mRNA synthesis via a synergistic suppression of ERK/IκB activation. Inhibition of TNFα production by prednisolone+salbutamol pretreatment was also confirmed in vivo in mice subjected to HMGB1 injection; this effect was more pronounced than the effect of either of the agents administered separately. The current study unveils several drug-like modulators of HMGB1-mediated inflammatory responses and offers pharmacological directions for the therapeutic suppression of inflammatory responses in HMGB1-dependent diseases.

A DFT study on the structure-reactivity relationship of thiophosphorus acids as flotation collectors with sulfide minerals: Implication of surface adsorption

Thiophosphorous compounds: diisobutyl dithiophosphate (DIBDTPA), diisobutyl dithiophosphinate (DIBDTPI), diisobutyl monothiophosphate (DIBMTPA) and diisobutyl monothiophosphinate (DIBMTPI) are widely used as flotation collectors and corrosion inhibitors, though the true nature of their bonding mechanisms to solid surfaces is still unclear. Using density functional theory (DFT) calculations, this study investigates the structure-reactivity relationship of these thiophosphorus molecules as flotation collectors with sulfide minerals. The results indicate that the O atom(s) bonded to the P atom in thiophosphorus molecules can significantly impact the chemical reactivity of the S atom(s) in the four reagents, and for DIBMTPA and DIBMTPI, they could even attend the chemical bond formation with metal atoms. The reactive power of the four compounds to mineral surfaces of Cu, Au, Ag and Pb sulfides is predicted to be DIBDTPI≫DIBMTPI≥DIBDTPA>DIBMTPA, and their flotation selectivity against pyrite and sphalerite is suggested as DIBDTPA<DIBDTPI<DIBMTPI<DIBMTPA. Moreover, the thione form of acid or ion species of DIBMTPA or DIBMTPI is more stable than its thiol form, and in aqueous phases, the ionized thione of the four thiophosphorus collectors exhibits the strongest affinity to mineral surfaces. The theoretical results provide an atomic level understanding of the adsorption activity and selectivity of the four thiophosphorus molecules to metal sulfide minerals and a potential approach to molecular design of new thiophosphorous compounds for improving the flotation recovery of them.

New Insight into Intermediate Precursors of Brust–Schiffrin Gold Nanoparticles Synthesis

There is an ongoing intensive debate on the mechanism of gold nanoparticles formation regarding the intermediate precursors prior to the addition of reducing agent. A new detailed view of the widely used Brust–Schiffrin two-phase method to prepare gold nanoparticles is presented here. Precursor species of these reactions have been identified and quantified by NMR, UV–visible, Fourier-transform Raman spectroscopy, etc. We demonstrate that tetraalkylammonium gold complexes ([TOA][AuX2]) and soluble gold thiolate ([TOA][AuSRX] and [TOA][Au(SR)2]) were detectable as the precursors by NMR spectroscopy. Their relative contents depend on the concentration of reactants. Higher concentration of the reactants is favorable for the formation of soluble thiolate. Polymeric gold thiolate [Au(I)SR]n could eventually precipitate from the solution under specific conditions. The clear mechanism presented here is of great significance to tailor the size and properties of the final products.

Future of Cholesteryl Ester Transfer Protein (CETP) Inhibitors: A Pharmacological Perspective

In almost 30years since the introduction of HMG-CoA reductase inhibitors (statins), no other class of lipid modulators has entered the market. Elevation of high-density lipoprotein-cholesterol (HDL-C) via inhibiting cholesteryl ester transfer protein (CETP) is an attractive strategy for reducing the risk of cardiovascular events in high-risk patients. Transfer of triglyceride and cholesteryl ester (CE) between lipoproteins is mediated by CETP; thus inhibition of this pathway can increase the concentration of HDL-C. Torcetrapib was the first CETP inhibitor evaluated in phase III clinical trials. Because of off-target effects, torcetrapib raised blood pressure and increased the concentration of serum aldosterone, leading to higher cardiovascular events and mortality. Torcetrapib showed positive effects on cardiovascular risk especially in patients with a greater increase in HDL-C and apolipoprotein A-1 (apoA-1) levels. The phase III clinical trial of dalcetrapib, the second CETP inhibitor that has entered clinical development, was terminated because of ineffectiveness. Dalcetrapib is a CETP modulator that elevated HDL-C levels but did not reduce the concentration of low-density lipoprotein cholesterol (LDL-C). Both heterotypic and homotypic CE transfer between lipoproteins are mediated by some CETP inhibitors, including torcetrapib, anacetrapib, and evacetrapib, while dalcetrapib only affects the heterotypic CE transfer. Dalcetrapib has a chemical structure that is distinct from other CETP inhibitors, with a smaller molecular weight and a lack of trifluoride moieties. Moreover, dalcetrapib is a pro-drug that must be hydrolyzed to a pharmacologically active thiol form. Two other CETP inhibitors, anacetrapib and evacetrapib, are currently undergoing evaluation in phase III clinical trials. Both molecules have shown beneficial effects by increasing HDL-C and decreasing LDL-C concentration. The success of anacetrapib and evacetrapib remains to be confirmed upon the completion of phase III clinical trials in 2017 and 2015, respectively. Generally, the concentration of HDL-C has been considered a biomarker for the activity of CETP inhibitors. However, it is not clear whether a fundamental relationship exists between HDL-C levels and the risk of coronary artery diseases. The most crucial role for HDL is cholesterol efflux capacity in which HDL can reverse transport cholesterol from foam cells in atherosclerotic plaques. In view of the heterogeneity in HDL particle size, charge, and composition, the mere concentration of HDL-C may not be a good surrogate marker for HDL functionality. Recent clinical studies have reported that increased HDL functionality inversely correlates with the development of atherosclerotic plaque. Future development of CETP inhibitors may therefore benefit from the use of biomarkers of HDL functionality.

Mixed ligand ruthenium(III) complexes of benzaldehyde 4-methyl-3-thiosemicarbazones with triphenylphosphine/triphenylarsine co-ligands: Synthesis, DNA binding, DNA cleavage, antioxidative and cytotoxic activity

The new ruthenium(III) complexes with 4-methyl-3-thiosemicarbazone ligands, (E)-2-(2-chlorobenzylidene)-N-methylhydrazinecarbothioamide (HL1) and (E)-2-(2-nitrobenzylidene)-N-methylhydrazinecarbothioamide (HL2), were prepared and characterized by various physico-chemical and spectroscopic methods. The title compounds act as bidentate, monobasic chelating ligands with S and N as the donor sites and are preferably found in the thiol form in all the complexes studied. The molecular structure of HL1 and HL2 were determined by single crystal X-ray diffraction method. DNA binding of the ligands and complexes were investigated by absorption spectroscopy and IR spectroscopy. It reveals that the compounds bind to nitrogenous bases of DNA via intercalation. The oxidative cleavage of the complexes with CT-DNA inferred that the effects of cleavage are dose dependent. Antioxidant study of the ligands and complexes showed the significant antioxidant activity against DPPH radical. In addition, the in vitro cytotoxicity of the ligands and complexes against MCF-7 cell line was assayed which showed higher cytotoxic activity with the lower IC50 values indicating their efficiency in killing the cancer cells even at low concentrations.

Ga and As competition for thiolate formation at p-GaAs(1 1 1) surfaces

Self-assembled layers of 4,4′-thio-bis-benzene-thiolate spontaneously adsorbed on p-doped GaAs(111)A and GaAs(111)B electrodes were examined by EIS, XPS, and AFM investigations. XPS data provide evidence that (i) both As and Ga atoms are involved in the thiolate formation no matter which one is prevailing on the semiconducting surface and (ii) only one of the two thiol groups participates in the chemisorption bond. EIS and AFM results point to a more stable thiolate layer formed on the As-terminated surface than that formed on the Ga-terminated surface due to stronger self-assembling effects developed between the adsorbed species.

Kinetics and mechanism of reactions of the drug tiopronin with platinum(IV) complexes

Tiopronin, a synthetic thiol-containing drug being used in treatments of cystinuria and certain types of rare arthritis, is also a hepatoprotective and a detoxifying agent. Many analytical methods have been developed based on its redox chemistry with metal ions/complexes, but the kinetic and mechanistic aspects are poorly understood. In this work, the oxidation of tiopronin by cisplatin prodrug and a model compound, cis-[Pt(NH3)2Cl4] and trans-[PtCl2(CN)4]2−, was investigated. The oxidation kinetics was followed by a stopped-flow spectrophotometer over a wide pH range under the pseudo first-order conditions of [Tiopronin]≫[Pt(IV)]. Time-resolved spectra were also recorded for both Pt(IV) complexes, enabling to establish an overall second-order rate law: −d[Pt(IV)]/dt=k′[Tiopronin][Pt(IV)], where k′ pertains to observed second-order rate constants. Under the kinetic conditions, tiopronin was oxidized to form the tiopronin-disulfide exclusively as identified by mass spectrometry. A reaction mechanism was proposed, involving parallel reductions of the Pt(IV) complexes by the three protolytic tiopronin species as rate-determining steps. The rate constants for the rate-determining steps were derived. The fully deprotonated tiopronin is about 4×104 more reactive than its corresponding thiol form for both Pt(IV) complexes; the huge reactivity difference orchestrates closely with the fact that the nucleophilicity of thiolate is much higher than the corresponding thiol. Hence, the attack of the sulfur atom in thiol/thiolate of tiopronin on the axially-coordinated chloride in the Pt(IV) complexes is nucleophilic in nature in the rate-determining steps, resulting in a bridge formation and a subsequent bridged electron-transfer.

Structural, spectral analysis and DNA studies of heterocyclic thiosemicarbazone ligand and its Cr(III), Fe(III), Co(II) Hg(II), and U(VI) complexes

The paper presents a combined experimental and computational study of novel Cr(III), Fe(III), Co(II), Hg(II) and U(VI) complexes of (E)-2-((3-hydroxynaphthalen-2-yl)methylene)-N-(pyridin-2-yl)hydrazinecarbothioamide (H2L). The ligand and its complexes have been characterized by elemental analyses, spectral (IR, UV–vis, 1H NMR and 13C NMR), magnetic and thermal studies. IR spectra show that H2L is coordinated to the metal ions in a mononegative bi or tri manner. The structures are suggested to be octahedral for all complexes except Hg(II) complex is tetrahedral. Theoretical calculations have been performed to obtain IR spectra of ligand and its complexes using AM1, MM, Zindo/1, MM+ and PM3, methods. Satisfactory theoretical–experimental agreements were achieved by MM method for the ligand and PM3 for its complexes. DOS calculations carried out by MM (ADF) method for ligand Hg complex from which we concluded that the thiol form of the ligand is more active than thione form and this explains that the most complexation take place in that form. The calculated IR vibrations of the metal complexes, using the PM3 method was the nearest method for the experimental data, and it could be used for all complexes. Also, valuable information are obtained from calculation of molecular parameters for all compounds carried out by the previous methods of calculation (electronegativity of the coordination sites, net dipole moment of the metal complexes, values of heat of formation and binding energy) which approved that the complexes are more stable than ligand. The low value of ΔE could be expected to indicate H2L molecule has high inclination to bind with the metal ions. Furthermore, the kinetic and thermodynamic parameters for the different decomposition steps were calculated using the Coats–Redfern and Horowitz–Metzger methods. Finally, the biochemical studies showed that, complex 2, 4 have powerful and complete degradation effect on DNA. For the foremost majority of cases the activity of the ligand is greatly enhanced by the presence of a metal ion. Thus presented results may be useful in design new more active or specific structures.

Synthesis of rGO–Ag nanoparticles for high-performance SERS and the adsorption geometry of 2-mercaptobenzimidazole on Ag surface

The sliver nanoparticles (AgNPs) with diameters of 30∼50 nm were self-assembled onto the surfaces of reduced graphene oxide (rGO) sheets simply by mixing AgNO3 aqueous solution and GO dispersion via a synchronous reduction process. Structure and morphology of the rGO–AgNPs hybrids were well characterized. More significantly, the surface-enhanced Raman scattering (SERS) spectrum of 2-mercaptobenzimidazole (MBI) adsorbed on the solid rGO–AgNPs surface shown that the rGO–AgNPs system gives a very strong SERS intensity at in-plane vibrational modes in comparison to the out-of-plane vibrational modes. This large enhancement effect is most likely a result of charge-transfer (CT) mechanism. Based on the surface selection rules and the information provided by the highly enhanced in-plane vibrational modes, it can be found that MBI molecule was adsorbed on AgNPs surface as a thiol form via the sulphur and nitrogen atoms with a slightly tilted geometric conformation.

In vivo evaluation of drug-drug interactions linked to UGT inhibition: the effect of probenecid on dalcetrapib pharmacokinetics

To assess the effect of the UGT inhibitor probenecid on the pharmacokinetics of dalcetrapib, an investigational drug whose pharmacologically active thiol form undergoes glucuronidation (fm UGT ≥ 0.25). A two-way crossover study in 20 healthy subjects. Subjects received a single 600 mg dose of dalcetrapib with or without probenecid (500 mg 4 times daily for 6 days). AUC∞ and Cmax of dalcetrapib thiol were increased by 14% and 21%, respectively, by co-administration of probenecid. This case study illustrates the difficulty in predicting clinically relevant drug-drug interactions for UGT substrates based only on the fraction metabolized by glucuronidation.

Catalytic Characterization of Human Microsomal Glutathione S-Transferase 2: Identification of Rate-Limiting Steps

Microsomal glutathione S-transferase 2 (MGST2) is a 17 kDa trimeric integral membrane protein homologous to leukotriene C4 synthase (LTC4S). MGST2 has been suggested to catalyze the biosynthesis of the pro-inflammatory mediator leukotriene C4 (LTC4) in cells devoid of LTC4S. A detailed biochemical study of MGST2 is critical for the understanding of its cellular function and potential role as an LTC4-producing enzyme. Here we have characterized the substrate specificity and catalytic properties of purified MGST2 by steady-state and pre-steady-state kinetic experiments. In comparison with LTC4S, which has a catalytic efficiency of 8.7 × 10(5) M(-1) s(-1), MGST2, with a catalytic efficiency of 1.8 × 10(4) M(-1) s(-1), is considerably less efficient in producing LTC4. However, the two enzymes display a similar KM(LTA4) of 30-40 μM. While LTC4S has one activated glutathione (GSH) (forming a thiolate) per enzyme monomer, the MGST2 trimer seems to display only third-of-the-sites reactivity for thiolate activation, which in part would explain its lower catalytic efficiency. Furthermore, MGST2 displays GSH-dependent peroxidase activity of ∼0.2 μmol min(-1) mg(-1) toward several lipid hydroperoxides. MGST2, but not LTC4S, is efficient in catalyzing conjugation of the electrophilic substrate 1-chloro-2,4-dinitrobenzene (CDNB) and the lipid peroxidation product 4-hydroxy-2-nonenal with GSH. Using stopped-flow pre-steady-state kinetics, we have characterized the full catalytic reaction of MGST2 with CDNB and GSH as substrates, showing an initial rapid equilibrium binding of GSH followed by thiolate formation. Burst kinetics for the CDNB-GSH conjugation step was observed only at low GSH concentrations (thiolate anion formation becoming rate-limiting under these conditions). Product release is rapid and does not limit the overall reaction. Therefore, in general, the chemical conjugation step is rate-limiting for MGST2 at physiological GSH concentrations. MGST2 and LTC4S exhibit distinct catalytic and mechanistic properties, reflecting adaptation to broad and specific physiological functions, respectively.