Thiol Molecules Research Articles

Effects of thiacloprid, a neonicotinoid pesticide, on rat reproductive system: Pregnancy hormone disruption and abortion trends

Thiacloprid (TCL), commonly known as Biscaya, is among the most widely used pesticides in agriculture, designed to eliminate insects by targeting their nicotinic receptors. This study explores the effects of orally administering TCL (at a dose of 50 mg/kg) on the hormone secretion crucial for pregnancy and the factors influencing abortion throughout the early, middle, and late stages of pregnancy in female rats.Following TCL exposure, there were significant increases in levels of 17β-Estradiol, prostaglandins F2α and E2, and serum oxytocin hormone in different stages of pregnancy. In contrast, progesterone and endothelin-1 serum levels notably decreased during the initial and final stages of pregnancy. Additionally, TCL led to a substantial rise in lipid peroxidation levels and a decrease in total thiol molecules and total antioxidant capacity, especially in uterine tissue. Although TCL did not significantly affect the morphological characteristics of the delivered fetuses, it notably increased the number of abortions, especially during the second and third stages of pregnancy.In summary, our findings suggest that TCL elevates the risk of abortion in pregnant rats by disrupting the secretion of hormones crucial for fertility (such as 17β-Estradiol/progesterone) and by increasing the secretion of abortion-inducing hormones like prostaglandins and oxytocin. Furthermore, these effects may be associated with disruptions in the oxidant/antioxidant balance within the ovaries and uterus.

Gold nanoparticles decoration of zinc oxide nanowalls on flexible substrates

Metal oxide nanostructures decorated with noble metal nanoparticles are hybrid structures with a special interface that combines the unique properties of those two materials. Noble metal nanoparticles exhibit useful catalytic properties, and they can be functionalized with biomaterials. In this work, we use gold nanoparticles that can be functionalized using thiolated molecules bound to the metal surface. Zinc oxide nano-walls (NWs) are a high surface-to-volume ratio wide-bandgap semiconductor nanostructures that, due to their biocompatibility and non-toxicity characteristics, can be used in biosensing applications that involve contact with tissues and cells. ZnO nano-walls can be deposited from aqueous solutions at low temperatures, both on rigid and flexible substrates, using a simple and low-cost process that can be upscaled to high-volume production. In this work, we study the nucleation and growth of the ZnO nano-walls and we describe the gold nanoparticles decoration at three different schemes of surface functionalization. Among these schemes, we found that the process where ZnO nano-walls were deposited on polyimide substrates followed by activation using a self-assembled monolayer, resulted in a decoration with uniform size and distribution of gold nano-particles. That process was studied as a function of the growth temperature, solution concentration, and time. The morphology of the ZnO nano-walls was studied by Scanning Electron microscope imaging and the crystal structure was studied by X-ray diffraction.

Electrically driven cavity plasmons in Au nanowire over Au film

Light emission via inelastic tunneling electrons is appealing for integrated optoelectronic devices due to its femtosecond time scale that can in principle allow terahertz modulation bandwidth. It has gained renewed interest since 2015 due to the improved quantum efficiency, highly tunable emission wavelength, linewidth, or directionality once the electrodes are designed as a plasmonic nanocavity. However, efficient construction of stable tunnel junctions with desired plasmonic resonances is still technically challenging because of the subnanometer precision required in the electrical and optical design. Here, we demonstrate an easily accessible electrically driven cavity plasmon in metal-insulator-metal (MIM) tunnel junctions, comprised by a Au nanowire (NW) across two separate ultrasmooth Au electrodes. Two layers of self-assembled thiol molecule defines a reliable tunneling barrier. The contribution from the localized cavity plasmons to the total light emission is found to be dominant over that from the propagating surface plasmon polariton in the MIM waveguide, different from the traditional explanations. This work introduces a simplified method for constructing electrically driven cavity plasmons using crystalline metals, which holds promise for applications in in situ chemical or biosensing and the development of flexible light-emitting metasurfaces.

Cytosine analogues as DNA methyltransferase substrates.

DNA methyltransferases are drug targets for myelodysplastic syndrome (MDS), chronic myelomonocytic leukemia (CMML), acute myelogenous leukemia (AML)and possibly β-hemoglobinopathies. We characterize the interaction of nucleoside analogues in DNA with a prokaryotic CpG-specific DNA methyltransferase (M.MpeI) as a model for mammalian DNMT1 methyltransferases. We tested DNA containing 5-hydroxymethylcytosine (5hmC), 5-hydroxycytosine (5OHC), 5-methyl-2-pyrimidinone (in the ribosylated form known as 5-methylzebularine, 5mZ), 5,6-dihydro-5-azacytosine (dhaC), 5-fluorocytosine (5FC), 5-chlorocytosine (5ClC), 5-bromocytosine (5BrC)and 5-iodocytosine (5IC). Covalent complex formation was by far most efficient for 5FC. Non-covalent complexes were most abundant for dhaC and 5mZ. Surprisingly, we observed methylation of 5IC and 5BrC, and to a lesser extent 5ClC and 5FC, in the presence, but not the absence of small molecule thiol nucleophiles. For 5IC and 5BrC, we demonstrated by mass spectrometry that the reactions were due to methyltransferase driven dehalogenation, followed by methylation. Crystal structures of M.MpeI-DNA complexes capture the 'in' conformation of the active site loop for analogues with small or rotatable (5mZ) 5-substituents and its 'out' form for bulky 5-substituents. Since very similar 'in' and 'out' loop conformations were also observed for DNMT1, it is likely that our conclusions generalize to other DNA methyltransferases.

Enhanced synthesis of antibody-functionalized gold nanoparticles for multiplexed exosome detection via mass signal amplification in LDI-TOF MS.

We present a novel method for sensitive exosomal protein detection using organic matrix-free laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF MS) and gold nanoparticles (AuNPs) functionalized with mass tags for signal amplification (Am-tags). Target exosomes were captured by specific antibodies on AuNPs and a biochip, where the antibody-presenting AuNPs (Ab/Am-tag@AuNPs) contained excess Am-tags. LDI-TOF MS analysis revealed the mass signal of Am-tags on Ab/Am-tag@AuNPs, indicating the presence of target exosomes. Thus, the target signal was amplified by a large number of Am-tags, resulting in enhanced sensitivity. We optimized the protocol to prepare stable Ab/Am-tag@AuNPs, focusing on parameters such as the concentration and ratio of thiol molecules for AuNP functionalization, suitable solvents for the coupling reaction, and amount of antibodies conjugated to the AuNPs. Subsequently, we evaluated the ability of our method to detect exosomes isolated from three cell lines, NIH3T3, MCF7, and HeLa, using an anti-Rab5 immobilized gold chip and anti-CD63/Am-tag@AuNPs with LDI-TOF MS analysis. Calibration curves constructed for the three cell lines showed a linear relationship with an excellent limit of detection. Finally, we emphasized the versatility of our method for the quantitative detection of exosomal proteins CD63 and mucin 1 (MUC1) using two types of Am-tags. LDI-TOF MS analysis revealed the presence of CD63 and MUC1 at different expression levels in HeLa and MCF7 cancer cells. Our findings clearly indicate the potential of Ab/Am-tag@AuNPs as a sensitive and reliable approach for identifying biomarkers in exosomes, providing valuable insights into their utility in biomedical research and clinical settings.

Effect of multi-walled carbon nanotubes reinforcement on self-healing performance of natural rubber

Abstract This work is motivated by the desire to restore the quality of rubber-based product properties with the intention of prolonging the service life period, thus helping create a sustainable environment by proposing effective rubber waste management. This study experimentally investigated an intrinsically self-healing zinc thiolate grafted natural rubber (NRZT) compound filled with multi-walled carbon nanotubes (MWCNT) to assess its influence on mechanical properties and self-healing performance. The MWCNT loading varied to 0, 2, 4, 6, and 8 phr. The Equilibrium swelling test was used to quantify the amount of ionic and covalent crosslinks formed. Fourier Transform Infrared (FTIR) spectra were used to detect the presence of MWCNT in the compound. The mechanical properties computed by the tensile and tear strength tests showed that the incorporation of MWCNT increased both properties up to three and twofold, respectively. However, as expected, the elongation at break (Eb) value was reduced. The unfilled sample showed that it can heal up to ∼98 %, measured from the tensile strength. However, the healing efficiency obtained from tensile strength reduces to ∼88 % by incorporating 2 phr MWCNT. The Eb and its self-healing efficiency gradually decreased as the MWCNT amount increased. All samples showed outstanding properties under the tearing mode, where the healed samples produced higher tear strength (>100 % healing) than the initial value. Scanning Electron Microscopy (SEM) micrographs revealed a noticeable gap along the healed cut line with increased MWCNT numbers, possibly due to the lower reaction between polymerized zinc thiolate (PZTh) radicals with zinc thiolate (ZT) and rubber molecules. The work aims to investigate the influence of MWCNTs on the mechanical and healing performance of self-healing NR composites by comparing them to their unfilled sample.

Silymarin Improves Thyroid Function in Lithium-treated Bipolar Patients: A Randomized, Double-blind, Placebo-controlled Pilot Study

Background: Thyroid dysfunction is one of the most important side effects of lithium carbonate. Silymarin is a flavonolignan extracted from the milk thistle Silybum marianum (L.), which has remarkable antioxidant and therapeutic properties. This clinical trial study aimed to evaluate the effect of silymarin on thyroid function and serum antioxidant status in patients with lithium-treated bipolar disorder. Methods: Bipolar patients with a depression episode and a history of at least six months of lithium use were randomly divided into placebo-control (n=18) and intervention (n=19) groups. In addition to standard medication, patients in the intervention and control groups received silymarin (140 mg) and placebo tablets daily for ten weeks, respectively. Finally, thyroid function and serum antioxidant status were evaluated along with clinical signs at the beginning and the tenth week. Results: Following the administration of silymarin, a significant increase was observed in total antioxidant capacity (p = 0.004) and total thiol molecules (p = 0.005) levels in serum compared to the placebo group. Although silymarin had no significant effect on serum triiodothyronine (T3) and lithium levels, it could significantly improve the secretory status of thyroid-stimulating hormone (TSH; p = 0.002) and Thyroxine (T4; p = 0.02) hormones in comparison to the placebo group. Conclusion: The current study showed that silymarin might be effective for thyroid function in lithium- treated bipolar patients by improving body’s antioxidant status. Trial Registration Number: IRCT20190811044513N2

Gold(I)-Thiolate Coordination Polymers as Multifunctional Materials: The Case of Au(I)-p-Fluorothiophenolate.

Gold-sulfur interaction has vital importance in nanotechnologies and material chemistry to design functional nanoparticles, self-assembled monolayers, or molecular complexes. In this paper, a mixture of only two basic precursors, such as the chloroauric acid (HAu(III)Cl4) and a thiol molecule (p-fluorothiophenol (p-HSPhF)), are used for the synthesis of gold(I)-thiolate coordination polymers. Under different conditions of synthesis and external stimuli, five different functional materials with different states of [Au(I)(p-SPhF)]n can be afforded. These gold-thiolate compounds are (i) red emissive, flexible, and crystalline fibers; (ii) composite materials made of these red emissive fibers and gold nanoparticles; (iii) amorphous phase; (iv) transparent glass; and (v) amorphous-to-crystalline phase-change material associated with an ON/OFF switch of luminescence. The different functionalities of these materials highlight the great versatility of the gold(I) thiolate coordination polymers with easy synthesis and diverse shaping that may have great potential as sustainable phosphors, smart textiles, sensors, and phase change memories.

Molecular Templates on Surfaces by Exploiting Supramolecular Chemistry in Langmuir–Blodgett Monolayers

AbstractAttaining precise control over molecular arrangements is of paramount importance for numerous applications in nanotechnology, particularly in constructing molecular templates to accurately immobilize target materials on surfaces. A strategic combination of supramolecular and interfacial chemistry may serve to build a well‐organized molecular network, enabling the subsequent location of target molecules on specific positions of a surface. A supramolecular complex (compound 1) comprised of a melamine unit forming hydrogen bonds with dendritic arms terminated in a coumarin unit is utilized, which readily undergoes photodimerization. The research demonstrates the formation of well‐organized Langmuir films of compound 1 which can be transferred on substrates at low surface pressures adopting a lying‐flat orientation. Upon irradiation of the pristine films at 365 nm the coumarin units undergo photo‐cross linking, leading to the formation of a compact photo‐crosslinked film. Incubation of these photo‐crosslinked films in a solution containing 1‐hexanethiol results in the withdrawal of the melamine and the chemisorption of two thiol molecules per each melamine unit. The nanopores created by the removal of the melamine core are attributed to the disruption of hydrogen bonds in compound 1 by the thiols. This precisely defined molecular network holds significant promise as a template for orchestrating the arrangement of functional materials on surfaces.

The thiol/disulfide balance is shifted towards oxidation in psoriatic arthritis compared to controls and is associated with higher disease activity.

This study was designed to compare thiol/disulfide and ischemia-modified albumin (IMA) levels between psoriatic arthritis (PsA) and healthy controls and evaluate the correlation between these molecules and the disease activity scores used in PsA. A total of 63 PsA patients and 49 healthy volunteers were included in the study. Bath Ankylosing Spondylitis Disease Activity Index (BASDAI), modified disease activity score 28 (DAS28), and Bath Ankylosing Spondylitis Functional Index (BASFI) scores were used as disease activity indices for PsA patients. Calculations of native thiol (-SH), disulfide (-SS), and total thiol (-SH+-SS) molecules were made by the automatic spectrophotometric method, and the albumin cobalt binding test was used to measure IMA levels. In the PsA group, -SS/-SH and -SS/(-SH+-SS) levels were higher and -SH/(-SH+-SS) levels were lower than in controls. In the linear regression analysis, a significant correlation relationship was detected between DAS28-erythrocyte sedimentation rate (ESR) and -SS/(-SH+-SS) (β = 0.795, CI 95%, 0.196-1.395; P = .010), -SH/(-SH+-SS) (β = -0.475, CI 95%, 0.114-0.836; P = .010) and IMA (β = 3.932, CI 95%, 0.859-7.005; P = .013). Additionally, a significant correlation was detected between IMA and BASDAI and BASFI. In PsA, thiol/disulfide homeostasis has shifted in favor of disulfide as an oxidative indicator. Serum thiol/disulfide levels are correlated with PsA disease activity indices.

Improved resolution of 3-mercaptopropionate dioxygenase active site provided by ENDOR spectroscopy offers insight into catalytic mechanism

3-mercaptopropionate (3MPA) dioxygenase (MDO) is a mononuclear nonheme iron enzyme that catalyzes the O2-dependent oxidation of thiol-bearing substrates to yield the corresponding sulfinic acid. MDO is a member of the cysteine dioxygenase family of small molecule thiol dioxygenases and thus shares a conserved sequence of active site residues (Serine-155, Histidine-157, and Tyrosine-159), collectively referred to as the SHY-motif. It has been demonstrated that these amino acids directly interact with the mononuclear Fe-site, influencing steady-state catalysis, catalytic efficiency, O2-binding, and substrate coordination. However, the underlying mechanism by which this is accomplished is poorly understood. Here, pulsed electron paramagnetic resonance spectroscopy [1H Mims electron nuclear double resonance spectroscopy] is applied to validate density functional theory computational models for the MDO Fe-site simultaneously coordinated by substrate and nitric oxide (NO), (3MPA/NO)-MDO. The enhanced resolution provided by electron nuclear double resonance spectroscopy allows for direct observation of Fe-bound substrate conformations and H-bond donation from Tyr159 to the Fe-bound NO ligand. Further inclusion of SHY-motif residues within the validated model reveals a distinct channel restricting movement of the Fe-bound NO-ligand. It has been argued that the iron-nitrosyl emulates the structure of potential Fe(III)-superoxide intermediates within the MDO catalytic cycle. While the merit of this assumption remains unconfirmed, the model reported here offers a framework to evaluate oxygen binding at the substrate-bound Fe-site and possible reaction mechanisms. It also underscores the significance of hydrogen bonding interactions within the enzymatic active site.

Thiols Modulated Gold Nanorods Self-Assembly: Indirect Hydrophobic Effects Instead of Direct Electrostatic/Hydrogen Bonds Attraction.

For nanocrystals (NCs) self-assembly, understanding the chemical and supramolecular interactions among building blocks is significant for both fundamental scientific interests and rational nanosuperstructure construction. However, it has remained an extreme challenge for many self-assembly systems due to the lack of appropriately quantitative approaches for the corresponding exploration. Herein, by combination of the proposed colorimetric method for cationic surfactant quantitation and all-atom simulations, we manage to present a clear chemical picture for the thiol molecules modulated self-assembly of gold nanorods (GNRs), one of the earliest and most convenient methods for the fabrication of freestanding GNR self-assemblies. It is revealed that the self-assembly of GNRs is driven by the hydrophobic effects of the alkyl chains of the modified cationic surfactants, as their bilayer structure is destroyed by the added thiol molecules. In other words, the actual roles of the thiol molecules for causing GNRs assembly are indirectly inductive effects instead of the previously believed direct electrostatic attraction and/or hydrogen-bond linking effects of the binding thiol molecules. Furthermore, the GNRs exhibit diameter-dependent assembly behaviors: thicker GNRs tend to adopt the end-to-end assembly mode, while thin ones prefer the side-by-side assembly mode, further demonstrating that hydrophobic effects among the build blocks are the driving force for the GNRs assembly.

A paper-based point-of-care device for the detection of cysteine using gold nanoparticles from whole blood.

We present a colorimetric probe based on polyvinylpyrrolidone-capped gold nanoparticles (PVP-AuNPs) that is sensitive and selective for cysteine (Cys). A microfluidic paper-based analytical device (μ-PAD) with embedded dried PVP-AuNPs at the polyethersulfone (PES) paper surface is used for Cys detection. When thiol molecules attach to PVP-AuNPs in the presence of Cys, they clump together, and this causes the solution's color to shift from red to blue within 5 minutes. The device is capable of detecting Cys levels between 1.0 μM and 50.0 μM with a limit of detection (LOD) of 0.2 μM under optimized conditions. The stability of the μ-PAD was tested for 100 days, demonstrating re-dispersibility to detect Cys levels in blood. Dried PVP-AuNP-μPADs were integrated with blood plasma separation modules for point-of-care (POC) Cys detection. Consequently, the device shows potential as a self-sustaining, quantification platform with a recovery percentage ranging from 98.44 to 111.9 in clinical samples.

The thermodynamics of self-assembled monolayer formation: a computational and experimental study of thiols on a flat gold surface.

A methodology based on molecular dynamics simulations is presented to determine the chemical potential of thiol self-assembled monolayers on a gold surface. The thiol de-solvation and then the monolayer formation are described by thermodynamic integration with a gradual decoupling of one molecule from the environment, with the necessary corrections to account for standard state changes. The procedure is applied both to physisorbed undissociated thiol molecules and to chemisorbed dissociated thiyl radicals, considering in the latter case the possible chemical potential of the produced hydrogen. We considered monolayers formed by either 7-mercapto-4-methylcoumarin (MMC) or 3-mercapto-propanoic acid (MPA) on a flat gold surface: the free energy profiles with respect to the monolayer density are consistent with a transition from a very stable lying-down phase at low densities to a standing-up phase at higher densities, as expected. The maximum densities of thermodynamically stable monolayers are compared to experimental measures performed with reference-free grazing-incidence X-ray fluorescence (RF-GIXRF) on the same systems, finding a better agreement in the case of chemisorbed thiyl radicals.

Highly branched and ultrathin Au nanodendrites for reduction catalysis

Two-dimensional (2D) materials have garnered significant attention due to their distinctive physicochemical properties, with 2D noble metal nanodendrites being particularly intriguing in terms of their properties and functional prospects. However, the synthesis of ultrathin and highly branched gold nanodendrites (AuNDs) still poses challenges. In this study, we successfully achieved the synthesis of highly branched 2D AuNDs with a thickness of 4 nm by employing a carboxyl-functionalized C22-tailed surfactant along with the co-directing agent 2-mercaptonicotinic acid (2-MNA). The careful selection of specific thiol molecules such as 2-MNA is crucial for controlling the degree of branching and promoting the formation of ultrathin nanodendrites. Furthermore, we extended this method to synthesize alloy nanodendrites (AuAg NDs and AuCoAg NDs) using a similar approach. Due to their highly branched and ultrathin two-dimensional morphology, these prepared AuNDs exhibit excellent catalytic performance in the model reaction for 4-NP reduction. This thiol-induced synthesis strategy for AuNDs opens up new possibilities for designing other Au nanomaterials with an ultrathin morphology/structure.

Colloidal PbS Quantum Dot Photodiode Imager with Suppressed Dark Current.

Lead sulfide (PbS) colloidal quantum dots (CQDs) for photodetectors (PDs) have garnered great attention due to their potential use as low-cost, high-performance, and large-area infrared focal plane arrays. The prevailing device architecture employed for PbS CQD PDs is the p-i-n structure, where PbS CQD films treated with thiol molecules, such as 1,2-ethanedithiol (EDT), are widely used as p-type layers due to their favorable band alignment. However, PbS-EDT films face a critical challenge associated with low film quality, resulting in many defects that curtail the device performance. Herein, a controlled oxidization process is developed for better surface passivation of the PbS-EDT transport layer. The dark current density (Jd) of PbS CQD PDs based on optimized PbS-EDT layer shows a dramatic decrease by nearly 2 orders of magnitude. The increase of carrier lifetime and suppression of carrier recombination via controlled oxidation in PbS-EDT CQDs were confirmed by transient absorption spectra and electrochemical impedance spectra. The device based on the optimized PbS-EDT hole transport layer (HTL) exhibits a specific detectivity (D*) that is 3.4 times higher compared to the control device. Finally, the CQD PD employing oxidization PbS-EDT CQDs is integrated with a thin film transistor (TFT) readout circuit, which successfully accomplishes material discrimination imaging, material occlusion imaging, and smoke penetration imaging. The controlled oxidization strategy verifies the significance of surface management of CQD solids and is expected to help advance infrared optoelectronic applications based on CQDs.

Tuning Chemical Interface Damping: Competition between Surface Damping Pathways in Amalgamated Gold Nanorods Coated with Mesoporous Silica Shells.

The mechanism of mercury (Hg) amalgamation in gold nanorods coated with a mesoporous silica shell (AuNRs@mSiO2) and the effect of chemical treatments on the localized surface plasmon resonance (LSPR) spectral changes in single amalgamated AuNRs@mSiO2 remains unclear. In this study, we investigated Hg amalgamation and inward Hg diffusion in single AuNRs@mSiO2 without structural deformation via dark-field scattering spectroscopy and X-ray photoelectron spectroscopy. Then, we investigated the chemisorption of thiol molecules on single amalgamated AuNRs@Hg-mSiO2. Unlike previous studies on single AuNRs, the thiolation on single AuNRs@Hg-mSiO2 resulted in a redshift and line width narrowing of the LSPR peak within 1 h. To determine the chemical effect, we investigated the competition between two surface damping pathways: metal interface damping (MID) and chemical interface damping (CID). When we exposed amalgamated AuNRs@Hg-mSiO2 to 1-alkanethiols with three different carbon chain lengths for 1 h, we observed an increase in the line width broadening with longer chain lengths owing to enhanced CID, demonstrating the tunability of CID and LSPR properties upon chemical treatments. We also investigated the competition between the two surface damping pathways as a function of the time-dependent Au-Hg surface properties in AuNRs@Hg-mSiO2. The 24-h Hg treatment resulted in increased line width broadening compared to the 1-h treatment for the same thiols, which was attributed to the predominance of CID. This was in contrast to the predominance of MID under the 1-h treatment, which formed a core-shell structure. Therefore, this study provides new insights into the Hg amalgamation process, the effect of chemical treatments, competition between surface decay pathways, and LSPR control in AuNRs@mSiO2.

Shape-Induced Variations in Aromatic Thiols Adsorption on Gold Nanoparticle: A Novel Method for Accurate Evaluation of Adsorbed Molecules.

Nonspherical gold nanoparticles (GNPs) are increasingly used to enhance sensitivity and selectivity in analytical methods such as surface-enhanced Raman spectroscopy (SERS) for detecting trace biomarkers. However, there is limited research on the adsorption properties of aromatic thiols onto gold nanoparticles of different morphologies, where surface curvature varies significantly at the molecular level. In this study, we investigated the adsorption kinetics of 4-mercaptobenzoic acid, an aromatic molecule, on GNPs with different shapes using SERS. Our findings revealed significant differences in the adsorption behavior and binding site preferences of aromatic thiols on GNPs with distinct morphologies. While thiol molecules consider any surface site on nanospheres equally appealing, nanostars exhibit variations in curvature and surface energy, leading to initial binding with further repositioning from the tips of the nanostar after plasmon activation. To address these differences, we proposed a universal method to evaluate the quantity of tightly bound adsorbed molecules on GNPs independently of the particle size, shape, or concentration.

Evaluating the protective effect of metformin against diclofenac-induced oxidative stress and hepatic damage: In vitro and in vivo studies

Diclofenac (DIC) is one of the most commonly prescribed non-steroidal anti-inflammatory drugs and has been shown to cause oxidative stress and liver injury. The current study investigated protective effects of metformin against DIC-induced hepatic toxicity in both in vitro and in vivo models. For the in vitro study, HepG2 cells were exposed to DIC in the presence or absence of metformin. The effect of metformin on cell viability was evaluated by MTT assay. Oxidative stress parameters (malondialdehyde (MDA), total thiol molecules (TTM), and total antioxidant capacity (TAC)) were assessed. For the in vivo study, thirty-six male Wistar rats were randomly divided into 6 groups. These groups were normal saline, metformin (200 mg/kg), DIC (50 mg/kg/day), DIC + metformin (50, 100, and 200 mg/kg/day). Histopathological studies and serum levels of aspartate aminotransferase (AST), alanine aminotransferase (ALT), alkaline phosphatase (ALP), lactate dehydrogenase (LDH), albumin, direct and total bilirubin were measured. Also, oxidative stress parameters were assessed in liver tissue. Furthermore, expression of glutathione peroxidase (GPX)-1, −3, and −4, catalase (CAT), superoxide dismutase (SOD)-1, and −3 was examined using the real-time PCR method in hepatic tissue. In the in vitro study, metformin significantly prevented DIC-induced loss in cell viability in HepG2 cells. Metformin markedly reduced DIC-induced elevation of MDA levels and increased the TAC and TTM levels. In the in vivo study, metformin significantly prevented DIC-induced changes in hematological and histological markers. Administration of metformin significantly improved oxidative stress parameters in liver tissue. In addition, metformin increased the expression of antioxidant enzymes. Our results suggest that metformin exerts a significant protective effect against DIC-induced hepatic toxicity.

A synthetic thiol molecule releasing N-acetyl-l-cysteine and cysteamine drives early up-regulation of immunoproteasome subunits in the lymph nodes of mice infected with LP-BM5 leukemia retrovirus

Thiol molecules have been recently re-considered as drug candidates in viral infections because of their ability to induce redox changes which interfere with virus life cycle and modulate the host immune response. Little is known about the molecular mechanisms of their immunomodulatory properties.Here we show that I-152, a thiol molecule metabolized to release N-acetyl-l-cysteine and cysteamine and acting as a pro-glutathione agent, causes early up-regulation of immunoproteasome subunits in the lymph nodes of murine leukemia virus infected mice.This evidence suggests that the immunoproteasome may be modulated by thiol-based compounds with important implications in understanding redox-controlled immunoregulation.