Thiol-modified Hyaluronic Acid Research Articles

Artificial mucus layer formed in response to ROS for the oral treatment of inflammatory bowel disease.

The artificial mucus layer, such as hydrogels, used to repair the damaged intestinal barrier, is a promising treatment for inflammatory bowel disease (IBD). However, the currently reported hydrogel-based artificial barriers are administered via rectal injection, causing unnecessary discomfort to patients. Herein, we report an oral hydrogel precursor solution based on thiol-modified hyaluronic acid (HASH). Owing to the reactive oxygen species (ROS)-responsive gelling behavior, our precursor solution formed an artificial mucus coating over the inflamed regions of the intestines, blocking microbial invasion and reducing abnormally activated immune responses. Notably, HASH also modulated the gut microbiota, including increasing the diversity and enhancing the abundance of short-chain fatty acid-associated bacteria, which play a key role in gut homeostasis. We believe that the ROS-responsive artificial mucus layer is a promising strategy for the oral treatment of IBD.

An injectable COL6-crosslinked HA-DTPH hydrogel promotes spinal tract-like structure organization during spinal cord regeneration

Serious spinal cord injury (SCI) often leads to disorganized axon regeneration, impeding the accurate projection of neural signals. This study aims to rebuild spinal tracts by targeting the collagen VI (COL6)-induced axonal fasciculation pathway, which is active during spinal cord development but diminishes in regenerating spinal cord. A thiol-modified hyaluronic acid hydrogel crosslinked with COL6 (HAPC) is proposed to reactivate spinal tract morphogenesis for regeneration. Neurites cultured on the HAPC substrate exhibited a straight-bundled pattern, contrasting with the straggly pattern observed in control groups that lacked COL6. The dynamics of axonal aggregation and proximal retraction are determined to drive the formation of straight axon bundles. Experiments on a rat spinal cord transection model demonstrates that treatment with HAPC significantly induces the organization of spinal tract-like structures and promotes the targeted projection of 5-Hydroxytryptamine (5-HT) axons, along with improved functional recovery. These findings highlight the role of COL6 in spinal tract self-organization and the potential of HAPC for treating clinical SCI.

Double crosslinked hyaluronic acid and collagen as a potential bioink for cartilage tissue engineering

The avascular nature of hyaline cartilage results in limited spontaneous self-repair and regenerative capabilities when damaged. Recent advances in three-dimensional bioprinting have enabled the precise dispensing of cell-laden biomaterials, commonly referred to as ‘bioinks’, which are emerging as promising solutions for tissue regeneration. An effective bioink for cartilage tissue engineering needs to create a micro-environment that promotes cell differentiation and supports neocartilage tissue formation. In this study, we introduced an innovative bioink composed of photocurable acrylated type I collagen (COLMA), thiol-modified hyaluronic acid (THA), and poly(ethylene glycol) diacrylate (PEGDA) for 3D bioprinting cartilage grafts using human nasal chondrocytes. Both collagen and hyaluronic acid, being key components of the extracellular matrix (ECM) in the human body, provide essential biological cues for tissue regeneration. We evaluated three formulations – COLMA, COLMA+THA, and COLMA+THA+PEGDA – for their printability, cell viability, structural integrity, and capabilities in forming cartilage-like ECM. The addition of THA and PEGDA significantly enhanced these properties, showcasing the potential of this bioink in advancing applications in cartilage repair and reconstructive surgery.

Biphasic release of betamethasone from an injectable HA hydrogel implant for alleviating lumbar disc herniation induced sciatica

Epidural steroid injection (ESI) is a common therapeutic approach for managing sciatica caused by lumbar disc herniation (LDH). However, the short duration of therapeutic efficacy and the need for repeated injections pose challenges in LDH treatment. The development of a controlled delivery system capable of prolonging the effectiveness of ESI and reducing the frequency of injections, is highly significant in LDH clinical practice. In this study, we utilized a thiol-ene click chemistry to create a series of injectable hyaluronic acid (HA) based release systems loaded with diphasic betamethasone, including betamethasone dipropionate (BD) and betamethasone 21-phosphate disodium (BP) (BD/BP@HA). BD/BP@HA hydrogel implants demonstrated biocompatibility and biodegradability to matched neuronal tissues, avoiding artificial compression following injection. The sustained release of betamethasone from BD/BP@HA hydrogels effectively inhibited both acute and chronic neuroinflammation by suppressing the nuclear factor kappa-B (NF-κB) pathway. In a mouse model of LDH, the epidural administration of BD/BP@HA efficiently alleviated LDH-induced sciatica for at least 10 days by inhibiting the activation of macrophages and microglia in dorsal root ganglion and spinal dorsal horn, respectively. The newly developed HA hydrogels represent a valuable platform for achieving sustained drug release. Additionally, we provide a simple paradigm for fabricating BD/BP@HA for epidural injection, demonstrating greater and sustained efficiency in alleviating LDH-induced sciatica compared to traditional ESI and displaying potentials for clinical translation. This system has the potential to revolutionize drug delivery for co-delivery of both soluble and insoluble drugs, thereby making a significant impact in the pharmaceutical industry. Statement of SignificanceLumbar disc herniation (LDH) is a common degenerative disorder leading to sciatica and spine surgery. Although epidural steroid injection (ESI) is routinely used to alleviate sciatica, the efficacy is short and repeated injections are required. There remains challenging to prolong the efficacy of ESI. Herein, an injectable hyaluronic acid (HA) hydrogel implant by crosslinking acrylated-modified HA (HA-A) with thiol-modified HA (HA-SH) was designed to achieve a biphasic release of betamethasone. The hydrogel showed biocompatibility and biodegradability to match neuronal tissues. Notably, compared to traditional ESI, the hydrogel better alleviated sciatica in vivo by synergistically inhibiting the neuroinflammation in central and peripheral nervous systems. We anticipate the injectable HA hydrogel implant has the potential for clinical translation in treating LDH-induced sciatica.

Thiol-modified hyaluronic acid improves the physical stability of curcumin-zein nanoparticles by forming disulfide bonds with zein.

Zein-based nanoparticles have been developed in the food industry. However, their poor pH stability and unfavorable ionic strength stability remain a challenge even with the use of polysaccharides (such as hyaluronic acid) as stabilizers. To address this shortcoming, an improved strategy based on the disulfide bonds between thiol-modified hyaluronic acid (HASH) and zein was proposed. In this study, curcumin-zein nanoparticles (ZNs-HASH) were prepared with HASH as a stabilizer. The ZNs-HASH displayed similar particle sizes and spherical structures with ZNs and ZNs-HA (HA as a stabilizer). The Fourier transform infrared spectroscopy demonstrated the formation of disulfide bonds between zein and HASH. Among the three formulations tested, ZNs-HASH exhibited the highest pH and salt ion stability and the strongest antioxidant capacity. This study provided new insights for the improvement of physical stability of zein nanoparticles and the development of oral bioactive substances by chemical modification of natural polysaccharides.

Hyaluronic acid-based injectable nanocomposite hydrogels with photo-thermal antibacterial properties for infected chronic diabetic wound healing

A hydrogel wound dressing with a single functionality fails to meet the requirements for successful clinical treatment of chronic diabetic wounds that generally possess complicated microenvironments. A multifunctional hydrogel is thus highly desirable for improved clinical treatment. For this purpose, we reported herein construction of an injectable nanocomposite hydrogel with self-healing and photo-thermal properties as an antibacterial adhesive via dynamic Michael addition reaction and electrostatic interactions among three building moieties, i.e., catechol and thiol-modified hyaluronic acid (HA-CA and HA-SH), poly(hexamethylene guanidine) (PHMG), and black phosphorus nanosheets (BPs). An optimized hydrogel formulation eliminated over 99.99 % of bacteria (E. coli and S. aureus) and exhibited a free radical scavenging capability >70 % as well as photo-thermal properties in addition to viscoelastic characteristics, degradation properties in vitro, good adhesion and self-adaptation capacity. Wound healing experiments in vivo further confirmed the better performance of the developed hydrogels than that of a commercially available dressing (Tegaderm™) in promoting the healing of infected chronic wounds by preventing wound infection, decreasing inflammation, supporting collagen deposition, facilitating angiogenesis, and improving granulation tissues formation in the wound sites. Overall, the HA-based injectable composite hydrogels developed herein represent promising multifunctional wound dressings for infected diabetic wound repair.

In VitroExpansion of Antigen-Specific CD8+ T Cells from Human PBMCs Using Artificial T-cell Stimulating Microparticles

Abstract While current T cell-based immunotherapies have shown moderate success, clinical translation of these methods has been hindered by biological variability, limited efficacy, and high expense. Here, we create a novel T cell stimulating platform for antigen-specific CD8+ T cell activation and expansion, eliminating the extensive ex vivoexpansion steps and thus making it accessible for many more cancer patients. The scaffold is formed using thiol-modified hyaluronic acid cross-linked with PEGDA, magnetic dextran nanoparticles, as well as DTT-reduced MHC-Ig dimer HLA-A*02 (A2) and anti-CD28. The gel is passed through a mesh device to form microparticles (MPs), which are then passively loaded with peptides (here, CMV and MART1) for ease of multiple expansions. They were plated with human PBMCs thawed overnight in culture media supplemented with human AB serum and a cocktail of cytokines (IL-1b, IL-2, IL-4, IL-6, and IFNγ). On days 7 and 14, cells were harvested and analyzed for proliferation of antigen-specific cells. After fourteen days of culturing PBMCs with A2 MPs, we could detect a significant expansion of antigen-specific T cells via flow cytometry. When stimulated with peptide-pulsed target cells for an intracellular cytokine assay, they expressed one or more of IFNγ, TNFα, and IL-2, demonstrating their polyfunctionality. We also observed a greater population of memory T cells, which indicates that these cells may persist longer in the body. We have developed a biomaterial-based T cell activation platform that provides critical signals, mimicking the lymph nodes. These MPs are effective in expanding antigen-specific T cells from human PBMCs, and these cells have robust killing of target splenocytes.

Bone Formation on Murine Cranial Bone by Injectable Cross-Linked Hyaluronic Acid Containing Nano-Hydroxyapatite and Bone Morphogenetic Protein.

New injection-type bone-forming materials are desired in dental implantology. In this study, we added nano-hydroxyapatite (nHAp) and bone morphogenetic protein (BMP) to cross-linkable thiol-modified hyaluronic acid (tHyA) and evaluated its usefulness as an osteoinductive injectable material using an animal model. The sol (ux-tHyA) was changed to a gel (x-tHyA) by mixing with a cross-linker. We prepared two sol-gel (SG) material series, that is, x-tHyA + BMP with and without nHAp (SG I) and x-tHyA + nHAp with and without BMP (SG II). SG I materials in the sol stage were injected into the cranial subcutaneous connective tissues of mice, followed by in vivo gelation, while SG II materials gelled in Teflon rings were surgically placed directly on the cranial bones of rats. The animals were sacrificed 8 weeks after implantation, followed by X-ray analysis and histological examination. The results revealed that bone formation occurred at a high rate (>70%), mainly as ectopic bone in the SG I tests in mouse cranial connective tissues, and largely as bone augmentation in rat cranial bones in the SG II experiments when x-tHyA contained both nHAp and BMP. The prepared x-tHyA + nHAp + BMP SG material can be used as an injection-type osteoinductive bone-forming material. Sub-periosteum injection was expected.

Hyaluronic acid-based hydrogels show promise as bio-ink in the 3D printing of tissues

Stiffness and bioactivity of biomaterial, thiol-modified hyaluronic acid, is tuned in a cell-friendly system suited to 3D printing and cell encapsulation.

Hyaluronic acid-based hydrogels with independently tunable mechanical and bioactive signaling features.

Extracellular matrix provides critical signaling context to resident cells through mechanical and bioactive properties. To realize the potential of tissue engineering and regenerative medicine, biomaterials should allow for the independent control of these features. This study investigates a hydrogel system based on thiol-modified hyaluronic acid (HA-S) and polyethylene glycol diacrylate (PEGDA). The mechanical properties of HAS-PEGDA are dictated by two cytocompatible crosslinking reactions that occur at distinct time points: a rapid, Michael-type nucleophilic addition reaction between HA-thiols and PEG-acrylates and a prolonged maturation of disulfide crosslinks from remaining thiols. It is hypothesized that these reactions would enable the independent tuning of the mechanical and bioactive features of HAS-PEGDA. Rheological studies confirmed that initial gelation reached completion by 1 day, at which point the shear modulus was proportional to the concentration of PEGDA. Over time, the shear modulus evolved dramatically, and final stiffness depended on the availability of HA-thiols. The addition of PEG-monoacrylate (PEGMA) after the initial gelation occupied a percentage of remaining thiols to prevent disulfide crosslinking, decreasing the steady-state stiffness in a dose-dependent manner. A fraction of the PEGMA was then replaced with acrylated peptide ligands to introduce specific bioactivity to the otherwise non-cell-adhesive network. The degree of latent stiffening was controlled by the total amount of peptide-PEGMA, while adhesivity was tuned with the balance of bioactive and inactive peptides. The functional effects of the tunable mechanical and bioadhesive ligand properties were confirmed with assays of cell adhesion and morphology.

A conductive and biodegradable hydrogel for minimally delivering adipose-derived stem cells

Injectable hydrogel is one of the most important biomaterials for tissue engineering and drug delivery. However, it is still a challenge to obtain an injectable hydrogel with conductive property on account of the poor water solubility of conductive polymers Here, a conductive hydrogel with controllable biodegradability was constructed for minimally delivering adipose mesenchymal stem cells (ADSCs). Firstly, a disulfide containing and hyperbranched polymer structure poly(β-amino ester) (PBAE) with multi-acrylate end groups was synthesized by poly(ethylene glycol) diacrylate(PEGDA) and cystamine, and then tetraaniline (TA) was grafted on the PBAE chain to obtain a conductive PBAE-TA polymer. PBAE-TA shows a good water solubility, which can be crosslinked by thiol-modified hyaluronic acid (HA-SH) due to the click reaction between acrylate and thiol to in situ form a hydrogel within 1 min. The hydrogel illustrates a good electrical conductivity of 9.6×10−3 S/cm and a controllable biodegradable behavior in dithiothreotol (DTT) solution. PBAE-TA HA-SH hydrogel was subcutaneously injected for delivering ADSCs. The gene expression of Cx43 and TGF-β1 were up-regulated by PBAE-TA/HA-SH hydrogel, suggesting an enhancement in the electrical coupling and an anti-inflammatory property. This injectable, biodegradable, and conductive hydrogel can effectively deliver stem cells, which might be used in skin, muscle, and myocardium regeneration.

Functionalization of hyaluronic acid hydrogels with ECM-derived peptides to control myoblast behavior

Volumetric muscle loss (VML) occurs when skeletal muscle injury is too large for the body to fully self-repair. Typically, fibrotic tissue fills the void, which reduces muscle functionality and limb movement. Although a wide variety of natural and synthetic scaffolds have been studied with the purpose of providing the appropriate structural support, to date no scaffold has significantly restored muscle functionality after VML. Satellite cells, adult stem cells within the muscle capable of restoring smaller injuries, are sensitive to the stiffness and composition of the surrounding environment. Scaffolds that only address structural support are not sufficient to restore functionality and instead need to be designed to both promote satellite cell activation and prevent excessive fibroblast recruitment. The objective of this study was to design a scaffold that mimicked the regenerative environment and determine how the biomechanical properties differentially influence myogenic precursor and connective tissue cells. One of the main extracellular matrix (ECM) molecules upregulated during regeneration is hyaluronic acid (HA). Therefore, thiol-modified HA and poly(ethylene glycol) diacrylate hydrogels were generated and functionalized with peptides based on ECM known to influence regeneration, including fibronectin, laminin and tenascin-C. Scaffolds with different stiffness were created by varying HA content. The influence of HA stiffness and peptide functionalization on myogenic precursor and connective tissue cell proliferation, migration and gene expression was quantified. Our results indicated that HA hydrogels functionalized with the laminin peptide, IKVAV, show potential due to the enhanced promotion of myogenic cell behaviors including migration, proliferation and an increase in relevant transcription factors. Statement of SignificanceThe goal of this study was to identify hyaluronic acid (HA) hydrogels with peptide and stiffness combinations that will direct muscle-derived cells towards regenerating phenotypes. While the interaction of skeletal muscle with RGD-functionalized HA hydrogels has been investigated, none of the other peptides described in this study had been used in the context of HA-based scaffolds and skeletal muscle-derived cells. Notably, the response of cells to variations in mechanics was dependent on ECM coating and lineage. The 3% HA functionalized with the laminin peptide, IKVAV, showed the most promise for future in vivo studies, as these hydrogels best promoted myoblast cell proliferation, attachment and spreading, enhanced migration over connective tissue cells and upregulated transcription factors associated with activated satellite cells.

A π-π conjugation-containing soft and conductive injectable polymer hydrogel highly efficiently rebuilds cardiac function after myocardial infarction.

Previous studies suggested that a stiffer hydrogel system exhibited a better performance to promote heart function after myocardial infarction (MI). However, the nature of myocardium, a tissue that alternately contracts and relaxes with electrical impulses, leads us to hypothesize that a soft and conductive hydrogel may be in favor of mechanical and electrical signals transmission to enhance heart function after MI. In this work, π-π conjugation interaction was first employed to produce a soft injectable hydrogel with conductive property. Melamine with π-π conjugation ring was used as a core to synthesize a multi-armed crosslinker PEGDA700-Melamine (PEG-MEL), which could crosslink with thiol-modified hyaluronic acid (HA-SH) to form an injectable hydrogel rapidly. By incorporating graphene oxide (GO), the injectable PEG-MEL/HA-SH/GO hydrogel exhibited a soft (G'=25Pa) and anti-fatigue mechanical property and conductive property (G=2.84×10-4S/cm). The hydrogel encapsulating adipose tissue-derived stromal cells (ADSCs) was injected into MI area of rats. The significant increase in α-Smooth Muscle Actin (α-SMA) and Connexin 43 (Cx43) expression confirmed that the gel efficiently promoted the transmission of mechanical and electrical signals. Meanwhile, a significant improvement of heart functions, such as distinct increase of ejection fraction (EF), smaller infarction size, less fibrosis area, and higher vessel density, was achieved.

Poly(ethylene glycol)-Based Hyperbranched Polymer from RAFT and Its Application as a Silver-Sulfadiazine-Loaded Antibacterial Hydrogel in Wound Care.

A multifunctional branched copolymer was synthesized by Reversible Addition-Fragmentation Chain Transfer polymerization (RAFT) of poly(ethylene glycol) diacrylate (PEGDA Mn = 575) and poly(ethylene glycol) methyl methacrylate (PEGMEMA Mn = 500) at a feed molar ratio of 50:50. Proton nuclear magnetic resonance spectroscopy (1H NMR) confirmed a hyperbranched molecular structure and a high degree of vinyl functionality. An in situ cross-linkable hydrogel system was generated via a "click" thiol-ene-type Michael addition reaction of vinyl functional groups from this PEGDA/PEGMEMA copolymer system in combination with thiol-modified hyaluronic acid. Furthermore, encapsulation of antimicrobial silver sulfadiazine (SSD) into the copolymer system was conducted to create an advanced antimicrobial wound care dressing. This hydrogel demonstrated a sustained antibacterial activity against the bacterial strains Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli in comparison to the direct topical application of SSD. In addition, in vitro toxicology evaluations demonstrated that this hydrogel-with low concentrations of encapsulated SSD-supported the survival of embedded human adipose derived stem cells (hADSCs) and inhibited growth of the aforementioned pathogens. Here we demonstrate that this hydrogel encapsulated with a low concentration (1.0% w/v) of SSD can be utilized as a carrier system for stem cells with the ability to inhibit growth of pathogens and without adverse effects on hADSCs.

PDGF-BB Delays Degeneration of the Intervertebral Discs in a Rabbit Preclinical Model.

Preclinical animal study. Determine the in vivo effects of platelet-derived growth factor BB (PDGF-BB) delivered in a thiol-modified hyaluronic acid (TMHA) hydrogel on intervertebral disk (IVD) degeneration. IVD degeneration is a worldwide health concern and remains without an effective treatment. Several in vitro studies have demonstrated the potential of PDGF-BB, a primary component of platelet-rich plasma, as a therapy for IVD degeneration. Our hypotheses were that treatment of injured IVDs with PDGF would inhibit degeneration and that administration of PDGF in a TMHA hydrogel would improve its efficacy. IVD degeneration was induced using the rabbit annular puncture model. Four weeks after injury, IVDs were treated with either PDGF-BB or PDGF-BB delivered within a TMHA hydrogel. The efficacy of treatment was determined using x-ray, MRI, histology, and biomechanical testing. At 4 weeks after treatment, cell apoptosis and deposition of matrix containing type III collagen a1 (Col3a1) was demonstrated in both the nucleus pulposus and annulus fibrosus, while this was inhibited by PDGF. At 8 weeks after treatment, disc area and MRI indices of injured IVDs treated with PDGF were significantly higher (P < 0.05) than those treated with the TMHA alone. Similarly, degenerative scores for saline- and TMHA-treated IVDs demonstrated significantly more degeneration (P < 0.05) than PDGF-treated IVDs at 8 weeks. Biomechanical assessments found fewer indicators of degeneration in PDGF-TMHA-treated IVDs at both 4 and 8 weeks post-treatment, compared to saline-, TMHA-, and PDGF-only-treated IVDs. Both PDGF- and PDGF-TMHA-treated IVDs also demonstrated a significant increase (P < 0.05) in compressive strength to failure, compared with controls at 8 weeks post-treatment. The results of this study suggest that PDGF-BB significantly decreases disc degeneration and when delivered in a TMHA gel scaffold, helps prevent both apoptosis and Col3 matrix production, while maintaining disc structure and biomechanical function. NA.

Viscoelasticity of hyaluronic acid-gelatin hydrogels for vocal fold tissue engineering.

Crosslinked injectable hyaluronic acid (HA)-gelatin (Ge) hydrogels have remarkable viscoelastic and biological properties for vocal fold tissue engineering. Patient-specific tuning of the viscoelastic properties of this injectable biomaterial could improve tissue regeneration. The frequency-dependent viscoelasticity of crosslinked HA-Ge hydrogels was measured as a function of the concentration of HA, Ge, and crosslinker. Synthetic extracellular matrix hydrogels were fabricated using thiol-modified HA and Ge, and crosslinked by poly(ethylene glycol) diacrylate. A recently developed characterization method based on Rayleigh wave propagation was used to quantify the frequency-dependent viscoelastic properties of these hydrogels, including shear storage and loss moduli, over a broad frequency range; that is, from 40 to 4000 Hz. The viscoelastic properties of the hydrogels increased with frequency. The storage and loss moduli values and the rate of increase with frequency varied with the concentrations of the constituents. The range of the viscoelastic properties of the hydrogels was within that of human vocal fold tissue obtained from in vivo and ex vivo measurements. Frequency-dependent parametric relations were obtained using a linear least-squares regression. The results are useful to better fine-tune the storage and loss moduli of HA-Ge hydrogels by varying the concentrations of the constituents for use in patient-specific treatments.

Performance of an in situ formed bioactive hydrogel dressing from a PEG-based hyperbranched multifunctional copolymer

Hydrogel dressings have been widely used for wound management due to their ability to maintain a hydrated wound environment, restore the skin’s physical barrier and facilitate regular dressing replacement. However, the therapeutic functions of standard hydrogel dressings are restricted. In this study, an injectable hybrid hydrogel dressing system was prepared from a polyethylene glycol (PEG)-based thermoresponsive hyperbranched multiacrylate functional copolymer and thiol-modified hyaluronic acid in combination with adipose-derived stem cells (ADSCs). The cell viability, proliferation and metabolic activity of the encapsulated ADSCs were studied in vitro, and a rat dorsal full-thickness wound model was used to evaluate this bioactive hydrogel dressing in vivo. It was found that long-term cell viability could be achieved for both in vitro (21days) and in vivo (14days) studies. With ADSCs, this hydrogel system prevented wound contraction and enhanced angiogenesis, showing the potential of this system as a bioactive hydrogel dressing for wound healing.

Influence of cross-linked hyaluronic acid hydrogels on neurite outgrowth and recovery from spinal cord injury

Therapies that use bioactive materials as replacement extracellular matrices may hold the potential to mitigate the inhibition of regeneration observed after central nervous system trauma. Hyaluronic acid (HA), a nonsulfated glycosaminoglycan ubiquitous in all tissues, was investigated as a potential neural tissue engineering matrix. Chick dorsal root ganglia were cultured in 3D hydrogel matrices composed of cross-linked thiol-modified HA or fibrin. Samples were cultured and images were acquired at 48-, 60-, and 192-hour time points. Images of all samples were analyzed at 48 hours of incubation to quantify the extent of neurite growth. Cultures in crosslinked thiolated HA exhibited more than a 50% increase in neurite length compared with fibrin samples. Furthermore, cross-linked thiolated HA supported neurites for the entire duration of the culture period, whereas fibrin cultures exhibited collapsed and degenerating extensions beyond 60 hours. Two concentrations of the thiolated HA (0.5 and 1%) were then placed at the site of a complete thoracic spinal cord transection in rats. The ability of the polymer to promote regeneration was tested using motor evoked potentials, retrograde axonal labeling, and behavioral assessments. There were no differences in any of the parameters between rats treated with the polymer and controls. The use of a cross-linked HA scaffold promoted robust neurite outgrowth. Although there was no benefit from the polymer in a rodent spinal cord injury model, the findings in this study represent an early step in the development of semisynthetic extracellular matrice scaffolds for the treatment of neuronal injury.

Disulfide cross-linked hyaluronan hydrogels.

A new disulfide cross-linking strategy was developed to prepare hyaluronic acid (HA) hydrogel from thiol-modified HA. First, dithiobis(propanoic dihydrazide) (DTP) and dithiobis(butyric dihydrazide) (DTB) were synthesized and then coupled to HA with carbodiimide chemistry. Next, disulfide bonds of the initially formed gel were reduced using dithiothreitol (DTT) to give, after exhaustive dialysis, the corresponding thiol-modified macromolecular derivatives HA-DTPH and HA-DTBH. The degree of substitution of HA-DTPH and HA-DTBH could be controlled from 20% to 70% of available glucuronate carboxylic acid groups. The pK(a) values of the HA-thiol derivatives were determined spectrophotometrically to be pK(a) = 8.87 (HA-DTPH) and pK(a) = 9.01 (HA-DTBH). The thiol groups could be oxidized in air to reform disulfide linkages, which resulted in HA-DTPH and HA-DTBH hydrogel films. Further oxidation of these hydrogels with dilute H(2)O(2) created additional cross-links and afforded poorly swellable films. The disulfide cross-linking was reversible, and films could be again reduced to sols with DTT. Release of blue dextran from cross-linked films was used as a model for drug release. The rapid gelation of the HA-DTPH solution under physiological conditions was also achieved, which demonstrated the capacity for in situ cell encapsulation. Thus, L-929 murine fibroblasts were encapsulated in HA-DTPH hydrogel; these cells remained viable and proliferated during 3 days of culture in vitro.