Thin Surface Layer Research Articles

Advancing Multi‐Optical Performances in Lanthanide‐Doped Fluoride Core@Shell Nanoarchitectures by Minimizing Cation Intermixing

AbstractCore/shell structures are widely employed to enhance photoluminescence efficiency and manipulate excitation dynamics in lanthanide‐doped fluoride nanoparticles (NPs). However, prominent cation intermixing leads to significant deviations from the expected optical performances, presenting a formidable challenge in a deeper understanding of the chemical processes involved, as well as developing efficient suppression methods. Here, a reliable and facile multi‐optical reference strategy to reveal the integral cation intermixing processes is designed. This strategy analyzes the presence of Ce3+ ions in the core (or shell) and their influences on near‐infrared light‐triggered upconversion (UC), ultraviolet (UV)‐activated downshifting (DS), and X‐ray‐excited optical/persistent luminescence (XEOL/XEPL) of Tb3+ ions in the shell (or core). The results demonstrate that a thin surface layer of core NPs dissolves to reach dissolution equilibrium, which then distributes throughout the entire shell layer, rather than being confined to an interfacial region. It is further developed an improved technique to greatly inhibit cation intermixing by successive shell growth with excessive cation precursors, enabling superior multi‐optical performances, including UC, DS, XEOL/XEPL, and time‐dependent multicolor evolution. The findings significantly advance the development of lanthanide‐doped fluoride core/shell NPs with superior optical performances, broadening their potential applications in bio‐medicine, healthcare, industrial inspection, and optical information science.

Mass transfer during drop impact on a thin film

We conducted an axisymmetric numerical study of drop impact on a thin film of the same liquid in order to generate maps identifying the fluid elements in the drop and film that are transferred to the corolla during impact. We find that mass contribution from the drop comes from a surprisingly thin surface layer on the drop, and furthermore, that the shape of this layer in the drop and the film scales with film thickness, not the Weber number and Reynolds number as one might expect. The maps could be used to tailor drop composition for applications such as coatings or encapsulations.

Analysis of Microstructural Changes, Morphology and Optical Properties of the Surface of Copper Oxide Thin Layers due to Annealing for Use in Optoelectronic Devices

Analysis of Microstructural Changes, Morphology and Optical Properties of the Surface of Copper Oxide Thin Layers due to Annealing for Use in Optoelectronic Devices

Morphological and molecular characterization of Prorocentrum bidens (formerly known as P. compressum) and description of the closely related Prorocentrum bisaeptum sp. nov. (Prorocentrales, Dinophyceae)

ABSTRACT The genus Prorocentrum is diverse and comprises mostly marine dinoflagellates with a worldwide distribution. One large, common and easily recognizable planktonic species of Prorocentrum was known for a long time as P. compressum. This name, however, is incorrectly linked to a basionym of a diatom. The confusing taxonomy of the now also lectotypified diatom name was recently resolved, and the next younger available name, Prorocentrum bidens, was proposed for the dinoflagellate species. Based on multiple strains from various localities we here provide the first detailed morphological study of P. bidens thereby propagating the correct nomenclature of this species. The cells of one strain differed consistently from material assigned to P. bidens, and Prorocentrum bisaeptum sp. nov. is described here to represent this closely related species. Both species possessed two pyrenoids per chloroplast and shared the arrangement of ten periflagellar platelets, including subdivisions of platelets 6 and 8. Cells of both species were either fully motile or, in an encapsulated stage, enclosed with actively beating flagella in a hyaline flexible envelope bounded by a thin surface layer. Prorocentrum bisaeptum differs from P. bidens by a more elongated shape of the cells and by a smooth (not foveate) surface of the thecal plates. Most importantly, one to four cells of P. bisaeptum are consistently enclosed within two nesting envelopes, whereas there is only one such structure tightly surrounding one or two cells of P. bidens. This study increases and improves our knowledge of the diversity within this important group of planktonic organisms.

A novel nanofiltration membrane with a dual-charged layer to simultaneously remove anions and cations from acid mine drainage

A novel nanofiltration (NF) membrane with a positively and negatively dual-charged layer was finely designed in this study. The membrane was prepared by co-deposition of 4-tert-butylpyrocatechol (TBC) and polyethyleneimine (PEI) and electrostatic interaction to assemble positively and negatively charged functional layers on a substrate which is polyamide (PA)-based NF membrane. The NF membrane achieved excellent retention capacity through the combined effects of Donnan repulsion and electrostatic field trapping. The prepared membrane had a dense but thin surface layer with an average pore size of 0.84 nm, enabling an improved membrane flux of 8.66 L/(m2·h·bar) and high rejection to divalent inorganic salt ions (93.56 % Mg2+, 99.56 % SO42-). The membrane was used to treat acid mine drainage (AMD) and achieved an excellent retention capacity for ions in AMD (93.25 % Mg2+, 91.58 % Ca2+, 94.22 % Mn2+, 95.96 % SO42-), meeting industrial wastewater discharge standards. In addition, the NF membrane demonstrated good anti-fouling performance during the AMD treatment and significant potential for environmental remediation applications.

Effect of High Polymer, Crumb Rubber, and Epoxy-Modified Asphalt Binders on Laboratory Performance of Open-Graded Friction Course Mixtures

Open-graded friction course (OGFC) is a thin asphalt mixture surface layer. It is gap-graded with a high percentage of coarse aggregates that are nearly uniform in size, resulting in a high percentage of interconnected air voids and asphalt binder, which provides improved skid resistance, visibility, and decreased pavement–tire noise. However, construction personnel at the Louisiana Department of Transportation and Development reported that conventional OGFC mixtures have durability issues and shorter service life, compared with thin asphalt mixture lifts. Hence, effects of different asphalt binder types on the performance of OGFC mixtures were evaluated. Five types of asphalt binder were utilized: conventional styrene-butadiene-styrene (SBS) asphalt binder PG 76-22M; high SBS content asphalt binder PG 88-28; diluted epoxy asphalt (EA) binder with two different dosages (25% and 50%); and a hybrid modified asphalt binder prepared with SBS and crumb rubber modifier PG 76-22G. The optimal aggregate structures were determined based on minimum required air voids and voids in coarse aggregate. Physical and mechanical tests were conducted to assess the performance of OGFC mixtures, including draindown, permeability, loaded wheel track, and Cantabro abrasion loss. Results indicate that OGFC mixtures incorporating diluted EA binder exhibited lower draindown values than mixtures containing PG 76-22M and PG 88-28. Moreover, mixtures with PG 88-28 and 50% EA binders demonstrated improved resistance to rutting. Mixtures with 50% EA and PG 88-28 binders demonstrated improved durability, compared with mixtures with PG 76-22M for unaged and aged conditioning, as measured by Cantabro abrasion loss values.

Characterization of alane (AlH3) thin films grown by atomic layer deposition for hydrogen storage applications

Alane (AlH3) is an increasingly favored material for hydrogen and energy storage. It has demonstrated its potential in various applications, including rocket fuel, explosives, reducing agents, and serving as a viable source of hydrogen for portable fuel cells. In this study, we present the fabrication, morphology and elemental characterization of an AlH3 thin film grown through atomic layer deposition using a dimethylethylamine alane (DMEAA; AlH3N(CH3)2(CH2CH3)) precursor. The AlH3 thin film exhibited a rough surface with a white-like appearance, forming coarse grains as observed via scanning electron microscopy. X-ray diffraction confirmed the presence of AlH3 and it was compared with an aluminum thin film. Energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy confirmed the presence of pure AlH3 under a very thin aluminum oxide surface layer. Additionally, we propose a dissociation reaction mechanism based on the DMEAA precursor. Our work contributes to the advancement of hydrogen storage materials and energy-related applications that necessitate high hydrogen storage capacity and energy efficiency.

Divertor heat load estimates on NSTX and DIII-D using new and open-source 2D inversion analysis code

A thermography inversion algorithm has been developed in the open-source Python-based computer code, HYPERION, to calculate the heat flux incident on plasma-facing components (PFCs) in axisymmetric tokamaks. The chosen mesh size at the surface significantly affects the calculated transient heat flux results. The calculated transient heat flux will exceed the real value when the mesh size tends to zero but will underestimate the real value when the mesh size is large. A criterion for determining the appropriate mesh size for the transient heat flux calculation will be discussed. The numerical scheme for HYPERION uses a 2D fully implicit finite-difference approach, allowing temperature-dependent thermal properties of PFC materials. The inversion algorithm is benchmarked against established heat flux calculation codes, TACO and THEODOR, based on thermography data from NSTX and DIII-D respectively. The primary benefits of HYPERION compared to TACO and THEODOR are that it is open-source and it allows for the optimization of mesh thickness along the substrate. The algorithm also accounts for the thermal properties of thin surface layers that characteristically form on PFCs due to plasma-material interactions. The agreement between HYPERION and THEODOR is excellent, as the percent difference between the codes is ∼5% on average in the case of the DIII-D data for moderate to high heat flux. Verification tests with TACO show slightly higher average percent differences of 8% and 12%. In using HYPERION to study filaments in heat flux, the initial results indicate that small ELMs filaments significantly broaden the divertor heat flux, and decrease divertor peak flux. Compared to the inter-ELM, the small ELM filaments decrease the divertor peak surface temperature. With intermittent divertor filaments, the divertor heat flux width is comparable with that found in L-mode.

Time domain reflectometry coil probes for measuring thin surface layer soil moisture: Field tests over 21 years (2002–2022) under highly variable climate conditions in Mongolia

A coil probe (CP) for time-domain reflectometry (TDR) with a sensor length of 40 mm (CP40) was developed for long-term field soil moisture measurements in a thin surface soil layer (0–3 cm depth). In laboratory, soil moisture measurements of CP40 were nearly identical to those of a traditional two-rod type TDR (2RTDR) probe (rod length: 15 cm, diameter: 0.3 cm, spacing: 3 cm). The CP40 measurement accuracy was between 0.01 m3/m3 and 0.03 m3/m3. For long-term field soil moisture measurements, five CP40 units were installed in the highly wetted soil at the Sanzai site (SS), which is in the permafrost area of the Taiga, and dry soil at the Mandalgobi site (MGS) in the semi-arid area of Mongolia. Four units accurately measured soil moisture at both sites over six years (2002–2007and 2008–2009). Three units succeeded in conducting precisely continuous soil moisture measurements between 2008 and 2022 at the MGS. Two units successfully measured soil moisture over 21 years at both the sites. The representativeness of the CP40 soil moisture measurements in highly wetted soils was low because of heavy rainfall and soil heterogeneity. The accuracy of CP40 soil moisture measurements in highly wetted soils was slightly lower than that of the traditional 2RTDR probe. However, the accuracy of the CP40 soil-moisture measurements in the dry soil was comparable to that of the traditional 2RTDR probe. CP40 units are durable and their field soil moisture measurements demonstrate stable and precise performance (bias, RMSE), even under severe environmental conditions.

Enhanced Antibacterial Properties of Titanium Surfaces through Diversified Ion Plating with Silver Atom Deposition.

In this study, we investigate the antibacterial effect of silver atoms implanted into a thin surface layer of titanium at low energies using an alternative ion plating technology called Diversified Ion Plating. Silver atoms were incorporated into titanium samples using reactive low-voltage ion plating at 2 keV and 4 keV. Surface modifications and morphology were evaluated using wettability, profilometry measurements, and energy-dispersive spectroscopy. For a precise determination of the quantity and depth of implanted silver atoms on titanium surfaces, a combination of experimental techniques such as Rutherford Backscattering Spectrometry along with Monte Carlo simulations were utilized. To assess the antibacterial effects of the silver atoms incorporated into pure titanium surfaces, bacterial suspension immersion tests were performed with a standard strain of Staphylococcus aureus (ATCC 12600). The outcomes indicate that titanium surfaces implanted with silver atoms were more effective in inhibiting the growth of Staphylococcus aureus than pure titanium surfaces. Better results were found when the deposition was performed at 4 keV, indicating that a deeper implantation of silver, spanning a few nanometers, can result in a longer and more effective release of silver atoms. These findings suggest the potential for the development of new, cost-effective biomaterials, paving the way for improved implant materials in various health-related applications.

Feature-based maximum entropy for geophysical properties of the seabeda).

The coherent recombination of a direct and seabed reflected path is sensitive to the geophysical properties of the seabed. The concept of feature-based inversion is used in the analysis of acoustic data collected on a vertical line array (VLA) on the New England continental shelf break in about 200 m of water. The analysis approach for the measurements is based on a ray approach in which a direct and bottom reflected path is recombined, resulting in constructive and destructive interference of the acoustic amplitudes with frequency. The acoustic features have the form of prominent nulls of the measured received levels as a function of frequency as a broadband (500-4500 Hz) source passes the closest point of approach to the VLA. The viscous grain shearing (VGS) model is employed to parameterize a two-layer seabed model. The most likely seabed is a sand sediment with a porosity of about 0.42. There is a possibility of a thin (less than 0.5 m) surface layer having a slightly higher porosity between 0.45 and 0.50. Using the estimates for the VGS parameters inferred from the short-range frequency features, a normal mode model is used to predict the received acoustic levels over larger range scales.

Parameters of the Ultimately Thin Surface Layer of Liquid Argon

Parameters of the Ultimately Thin Surface Layer of Liquid Argon

Preventing columnar grains growth during hybrid wire arc additive manufacturing of austenitic stainless steel 316L

AbstractWire arc additive manufacturing (WAAM) is an efficient technique for producing medium to large‐size components, due to its accessibility and sustainability in fabricating large‐scale parts with high deposition rates, employing low‐cost and simple equipment, and achieving high material efficiency. Consequently, WAAM has garnered attention across various industrial sectors and experienced significant growth, particularly over the last decade, as it addresses and mitigates challenges within production markets. One of the primary limitations of WAAM is its thermal history during the process, which directly influences grain formation and microstructure heterogeneity in the resulting part. Understanding the thermal cycle of the WAAM process is thus crucial for process improvement. Typically, fabricating a part using WAAM results in a microstructure with three distinct zones along the build direction: an upper zone (thin surface layer) with fine grains, a middle zone dominated by undesirably long and large columnar grains covering more than 90% of the produced part, and a lower zone with smaller to intermediate columnar grains closer to the substrate material. These zones arise from variations in cooling rates, with the middle zone exhibiting the lowest cooling rate due to 2D conduction heat transfer. Consequently, producing a component with a microstructure comprising three different zones, with a high fraction of large and long columnar grains, significantly impacts the final mechanical properties. Therefore, controlling the size and formation of these grain zones plays a key role in improving WAAM. The aim of this work is to investigate the formation of undesired columnar grains in austenitic stainless steel 316L during WAAM and propose a simple hybrid technique by combining WAAM with a hot forging process (with or without interlayer cooling time). This approach targets the disruption of the solidification pattern of columnar grain growth during deposition progression and aims to enhance the microstructure of WAAM components.

β-Phase Crystallinity, Printability, and Piezoelectric Characteristics of Polyvinylidene Fluoride (PVDF)/Poly(methyl methacrylate) (PMMA)/Cyclopentyl-Polyhedral Oligomeric Silsesquioxane (Cp-POSS) Melt-Compounded Blends.

Poly(vinylidene fluoride) (PVDF) is a semicrystalline polymer that exhibits unique piezoelectric characteristics along with good chemical resistance and high thermal stability. Layer-based material extrusion (MEX) 3D printing of PVDF is desired to create complex structures with piezoelectric properties; however, the melt processing of PVDF typically directs the formation of the α crystalline allomorph, which does not contribute to the piezoelectric response. In this work, PVDF was compounded with poly(methyl methacrylate) (PMMA) and cyclopentyl-polyhedral oligomeric silsesquioxane (Cp-POSS) nanostructured additives in binary and ternary blends to improve MEX printability while maintaining piezoelectric performance. Overall crystallinity and β phase content were evaluated and quantified using a combination of attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and differential scanning calorimetry (DSC). Enhancement of MEX printability was measured by quantifying the interlayer adhesion and warpage of printed parts. All blends studied contained a significant percentage of β allomorph, but it could be detected by ATR-FTIR only after the removal of a thin surface layer. Inclusion of 1% Cp-POSS and up to 10% PMMA in blends with PVDF improved interlayer adhesion (2.3-3.6x) and lowered warpage of MEX printed parts compared to neat PVDF. The blend of 1% Cp-POSS/1% PMMA/PVDF was demonstrated to significantly improve the quality of MEX printed parts while showing similar piezoelectric performance to that of neat PVDF (average piezoelectric coefficient 24 pC/N). MEX printing of PVDF blends directly into usable parts with significant piezoelectric performance while reducing the challenges of printing the semicrystalline polymer opens the potential for application in a number of high value sectors.

Performance evolution and mechanism of asphalt crack sealant under UV aging: A continuity study

Asphalt crack repair materials, known as crack sealants, are directly exposed to ultraviolet (UV) radiation in asphalt pavements. This exposure causes the gradual aging and deterioration of both their surface and internal properties. To study this phenomenon, the sealant was subjected to UV irradiation for a range of 0–385 hours, with the basic properties of the aged sealant tested every 55 hours. Several techniques were employed to investigate the changes in the internal chemical composition of the sealant, including Fluorescence microscopy (FM), gel permeation chromatography (GPC) and Fourier transform infrared spectroscopy (FT-IR). The results revealed that the UV aging of the sealant mainly occurs in the thinner surface layer, which becomes progressively lighter in color. Notably, obvious surface cracks form after aging process. The cone penetration and softening point of the sealant exhibit an exponential or logarithmic change corresponding to the aging time. The most pronounced changes occur during the early stages of UV aging, with the properties tending to stabilize after approximately 220 h of aging. In addition, the FM images showed that the dispersed polymer particles within the sealant gradually transform into a continuous network structure after aging over time. The GPC spectrum of the aged sealant shifts to the left, indicating an increase in molecular weight, particularly in the polymer modifier. This is consistent with the transformation observed in the FT-IR analysis, which demonstrates that UV irradiation leads to the breaking and recombination of polymer chemical bonds in the sealant. The FT-IR analysis reveals the conversion of monosubstituted benzene to polysubstituted benzene in the polymer modifier, which also correlates with the formation of the network structure observed in the FM images and the increase in molecular weight detected in the GPC spectrum of the polymer modifier.

Investigations of optical and thermal properties of surface layers of Cd1−xBexTe samples by the photoacoustic method

The work presents the results of a research on the photoacoustic spectra of thin surface layers of Cd1−xBexTe crystals formed by grinding and polishing their surfaces. As a result of matching the theoretical and experimental photoacoustic spectra, thermal and optical parameters of these layers were determined. Thermal parameters of the surface layers, such as thermal conductivity and thermal diffusivity, turned out to be much worse than the analogous parameters of the substrate. The increase in the optical absorption of surface layers for photon energies below Eg was also determined. Eg was also determined.

Flash heating process for efficient meat preservation

Maintaining food safety and quality is critical for public health and food security. Conventional food preservation methods, such as pasteurization and dehydration, often change the overall organoleptic quality of the food products. Herein, we demonstrate a method that affects only a thin surface layer of the food, using beef as a model. In this method, Joule heating is generated by applying high electric power to a carbon substrate in <1 s, which causes a transient increase of the substrate temperature to > ~2000 K. The beef surface in direct contact with the heating substrate is subjected to ultra-high temperature flash heating, leading to the formation of a microbe-inactivated, dehydrated layer of ~100 µm in thickness. Aerobic mesophilic bacteria, Enterobacteriaceae, yeast and mold on the treated samples are inactivated to a level below the detection limit and remained low during room temperature storage of 5 days. Meanwhile, the product quality, including visual appearance, texture, and nutrient level of the beef, remains mostly unchanged. In contrast, microorganisms grow rapidly on the untreated control samples, along with a rapid deterioration of the meat quality. This method might serve as a promising preservation technology for securing food safety and quality.

Zero Voltage-Degradation of Li2MnO3 with Ultrathin Amorphous Li─Mn─O Coating.

Manganese-based lithium-rich layered oxides (Mn-LLOs) are promising candidate cathode materials for lithium-ion batteries, however, the severe voltage decay during cycling is the most concern for their practical applications. Herein, an Mn-based composite nanostructure constructed Li2MnO3 (LMO@Li2MnO3) is developed via an ultrathin amorphous functional oxide LixMnOy coating at the grain surface. Due to the thin and universal LMO amorphous surface layer etched from the lithiation process by the high-concentration alkaline solution, the structural and interfacial stability of Li2MnO3 are enhanced apparently, showing the significantly improved voltage maintenance, cycle stability, and energy density. In particular, the LMO@Li2MnO3 cathode exhibits zero voltage decay over 200 cycles. Combining with ex situ spectroscopic and microscopic techniques, the Mn2+/4+ coexisted behavior of the amorphous LMO is revealed, which enables the stable electrochemistry of Li2MnO3. This work provides new possible routes for suppressing the voltage decay of Mn-LLOs by modifying with the composite functional unit construction.

DeepDOF-SE: affordable deep-learning microscopy platform for slide-free histology

Histopathology plays a critical role in the diagnosis and surgical management of cancer. However, access to histopathology services, especially frozen section pathology during surgery, is limited in resource-constrained settings because preparing slides from resected tissue is time-consuming, labor-intensive, and requires expensive infrastructure. Here, we report a deep-learning-enabled microscope, named DeepDOF-SE, to rapidly scan intact tissue at cellular resolution without the need for physical sectioning. Three key features jointly make DeepDOF-SE practical. First, tissue specimens are stained directly with inexpensive vital fluorescent dyes and optically sectioned with ultra-violet excitation that localizes fluorescent emission to a thin surface layer. Second, a deep-learning algorithm extends the depth-of-field, allowing rapid acquisition of in-focus images from large areas of tissue even when the tissue surface is highly irregular. Finally, a semi-supervised generative adversarial network virtually stains DeepDOF-SE fluorescence images with hematoxylin-and-eosin appearance, facilitating image interpretation by pathologists without significant additional training. We developed the DeepDOF-SE platform using a data-driven approach and validated its performance by imaging surgical resections of suspected oral tumors. Our results show that DeepDOF-SE provides histological information of diagnostic importance, offering a rapid and affordable slide-free histology platform for intraoperative tumor margin assessment and in low-resource settings.

Fabrication and Optimization of Primary Batteries Using Ni/Graphene Nanosheet Electrodes

This study aims to investigate the impact of varying the mass ratio of Ni to Graphene Nano Sheets (GNS) and how incorporating GNS affects the performance of a primary battery prototype (Ni/GNS//electrolyte//GNS). The primary battery prototype was developed using both impregnation and alloy methods. Different mass ratios of Ni/GNS to electrolyte to GNS were tested, including ratios of 1:2:1 (A), 2:2:1 (B), 1:2:2 (C), 2:1:2 (D), and 1:1:2 (E). The characterization of GNS, Ni/GNS, and the primary battery prototype involved using X-Ray Diffraction (XRD) and Scanning Electron Microscope-Energy Dispersive X-Ray (SEM-EDX) instruments. A multimeter was employed to measure electrical conductivity, energy density, and power density. A potentiostat/galvanostat was used to measure cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). XRD analysis showed a broad and weak peak at 2θ= 24.32° for GNS, confirming its successful synthesis. Additionally, a peak at 2θ = 43.5° indicated effective deposition of Ni on the GNS surface in Ni/GNS. The SEM-EDX results supported the XRD findings, showing regularly spaced pores and a thin surface layer in GNS. Notably, white spots on the graphene surface in Ni/GNS indicated successful Ni deposition. In terms of electrical conductivity, the highest value was observed in the primary battery prototype for sample D (2:1:2), which measured 1.11 S/cm2. These results were also supported by measurements of energy density and power density in sample D, which achieved the highest values among all samples, with 144,788 Wh/kg and 252,500 W/kg, respectively. Moreover, the CV and EIS measurements remained stable at 0.30 kΩ and 0.88 kΩ, suggesting that GNS could potentially conduct electrons owing to its electrical conductivity.