Thin Metasurface Research Articles

Multi-band ultrathin reflective metasurface for linear and circular polarization conversion in Ku, K, and Ka bands

Linear polarization (LP) and circular polarization (CP) holds paramount importance in Ku, K, and Ka bands for satellite based communication, and remote sensing applications. Satellite based remote sensing applications face challenges like atmospheric attenuation, noise & interference, and signal degradation. Moreover, satellite based communication application demands CP in two distinct, non-adjacent frequency bands with orthogonal polarizations at greater oblique angles, considering the unpredictable incidence angles of electromagnetic (EM) waves. Addressing these challenges, an innovative metasurface polarization converter is proposed to operate efficiently across the Ku-band (13.5–18.0 GHz), K-band (18.0–26.5 GHz), and Ka-band (26.5–38.5 GHz) frequency ranges. The converter achieves left-handed circular polarization (LHCP) in the Ku- and Ka-bands within the frequency ranges of 14.57–15.65 GHz and 27.47–33.85 GHz for y-polarized incident EM waves. Additionally, it provides right-handed circular polarization (RHCP) in the K- and Ka-bands at 17.27–23.92 GHz and 35.87–38.32 GHz for y-polarized incident EM waves. The LP conversion ratio exceeds 95% in the frequency bands of 15.97–16.85 GHz, 24.70–26.65 GHz, and 34.37–35.45 GHz for y-polarized, LHCP, and RHCP incident EM waves, respectively. The metasurface exhibits robust performance up to incidence angles of 45 degrees under oblique conditions. Experimental validation using traditional board-circuit manufacturing demonstrates close agreement between measured co- and cross-polarized reflection coefficients and simulations in the 13.5–18 GHz, and 24–38.5 GHz frequency range. Thin metasurface with a thickness of only 0.64 = 0.013λo mm, the proposed design outperforms existing studies in the literature, establishing its competitive edge in terms of structure and performance.

Intrinsic Superchirality in Planar Plasmonic Metasurfaces.

Plasmonic metasurfaces with spatial symmetry breaking are crucial materials with significant applications in fields such as polarization-controlled photonic devices and nanophotonic platforms for chiral sensing. In this paper, we introduce planar plasmonic metasurfaces, less than one-tenth of a wavelength thick, featuring nanocavities formed by three equilateral triangles. This configuration creates uniform, thin metasurfaces. Through a combination of experimental measurements and numerical modeling, we demonstrate the inherent superchirality of these plasmonic metasurfaces. We address the challenge of achieving a strong enhancement of optical chirality in the visible spectrum, reaching levels comparable to those of 3D chiral metasurfaces.

Thin film resonant metasurface absorbers using patch-based arrays on liquid crystal polymer substrates for centimeter-wave applications

This paper reports the design and development of thin-film resonant absorbers for narrowband and multiband operation in the frequency regions centered at 10 GHz. The structure of the resonant metasurface absorber (RMA) is based on a liquid crystal polymer (LCP) thin-film spacer with a copper patch array on the front surface and un-patterned copper film on the back surface of the LCP film. The design and simulation works were carried out using full-wave analysis of the RMA characteristics. The copper-based periodic patch array acts as a metasurface. The perfect RMA for a given LCP film thickness can be obtained through impedance optimization by adjustment of the dimensions of the lattice periods. The electric and magnetic field distributions were studied. The resonant film absorber based on a 100 μm thick LCP film has an electrical thickness of λ/300 at 10 GHz. The experimental work was conducted using a narrowband RMA prototype consisting of 11×11 cells. The measured result of the resonant absorption is at 10.1 GHz, which is in close agreement with the design frequency of 10 GHz. For multiband functionality, double- and quad-band film resonant absorbers have been designed based on a coplanar supercell utilizing the superposition of the resonance effect. The LCP film-based absorbers have the potential to be used in EM shielding and sensing applications in centimeter-wave applications.

Excitonic van der Waals Metasurfaces for Resonant Wavefront Shaping at Deep Subwavelength Thickness Scale.

Dielectric phase gradient metasurfaces have emerged as promising candidates to shrink bulky optical elements to subwavelength thickness scale based on dielectric meta-atoms. These meta-atoms strongly interact with light, thus offering excellent phase manipulation of incident light. However, to fulfill 2π phase control using meta-atoms, the metasurface thickness, to date, is limited to the order of 102 nm. Here, we present the thickness scaling down of phase gradient metasurfaces to <λ/20 by using excitonic van der Waals metasurfaces. High-refractive-index enabled by exciton resonances and symmetry-breaking nanostructures in the patterned layered tungsten disulfide (WS2) corporately enable quasibound states in the continuum in WS2 metasurfaces, which consequently yield complete phase regulation of 2π with the thickness down to 35 nm. To illustrate the concept, we have experimentally demonstrated beam steering, focusing, and holographic display using WS2 metasurfaces. We envision our results unveiling new venues for ultimate thin phase gradient metasurfaces.

Broadband acoustic illusion coating based on thin conformal metasurface

Acoustic metasurface with rationally distributed phase manipulating characteristic provides a promising platform to reshape the wavefront of scattering wave. Such acoustic illusion carpet suffers from limitation of narrow bandwidth and relatively large volume to contain the object to be hidden. Here, we propose and experimentally demonstrate broadband conformal acoustic illusion coatings composed of subwavelength-thick metacells that are designed by two types of modified Helmholtz resonators with 2π reflection phase. By deliberate design of reflection phase distributions of illusion coating, the reflected wavefront can be reshaped between trapezoid and triangles and vice versa. Furthermore, an enlarged illusion is obtained by this methodology. More importantly, the illusion behaviors are verified both numerically and experimentally from 3000Hz to 4500Hz, resulting in relatively broad bandwidth up to 40.5%, which is definitely of extreme importance for potential applications.

Intrinsic nonlinear geometric phase in SHG from zincblende crystal symmetry media

Abstract We demonstrate that AlGaAs thin films and metasurfaces generate a distinct intrinsic nonlinear geometric phase in their second harmonic signals, differing significantly from previous studies on nonlinear dielectric, plasmonic, or hybrid metasurfaces. Unlike conventional observations, our study reveals that the second harmonic phase remains unaffected by the linear optical response at both pump and harmonic wavelengths, introducing a novel realm of achievable phase functions yet to be explored. Furthermore, we explore the interplay between this intrinsic nonlinear geometric phase and the geometric phase induced by rotations of nanoresonators within metasurface arrangements. Our findings extend the capabilities of nonlinear wavefront shaping metasurfaces, exploiting phase manipulation to uncover unique phenomena exclusive to the nonlinear regime.

Hybrid ultrathin metasurface for broadband sound absorption

To this day, achieving broadband low-frequency sound absorption remains a challenge even with the possibilities promised by the advent of metamaterials and metasurfaces, especially when size and structural restrictions exist. Solving this engineering challenge relies on stringent impedance matching and coupling of the multiple independent local resonators in metasurface absorbers. In this Letter, we present an innovative design approach to broaden the sound absorption bandwidth at low-frequency regime. A hybrid metasurface design is proposed where four coupled planar coiled resonators are also coupled to a well-designed thin planar cavity. This hybrid metasurface creates a broad sound absorption band (130–200 Hz) that is twice as wide as that of the traditional single layer metasurface utilizing four coiled cavities at a deep subwavelength thickness (∼λ/51). This design strategy opens routes toward engineering a class of high-performance thin metasurfaces for ultra-broadband sound absorption, while keeping the planar size unchanged.

Surface-Guided Crystallization of Xanthine Derivatives for Optical Metamaterial Applications.

Numerous bio-organisms employ template-assisted crystallization of molecular solids to yield crystal morphologies with unique optical properties that are difficult to reproduce synthetically. Here, a facile procedure is presented to deposit bio-inspired birefringent crystals of xanthine derivatives on a template of single-crystal quartz. Crystalline sheets that are several millimeters in length, several hundred micrometers in width, and 300-600nm thick, are obtained. The crystal sheets are characterized with a well-defined orientation both in and out of the substrate plane, giving rise to high optical anisotropy in the plane parallel to the quartz surface, with a refractive index difference Δn ≈ 0.25 and a refractive index along the slow axis of n ≈ 1.7. It is further shown that patterning of the crystalline stripes with a tailored periodic grating leads to a thin organic polarization-dependent diffractive meta-surface, opening the door to the fabrication of various optical devices from a platform of small-molecule based organic dielectric crystals.

Electromagnetic characterization of a metasurface composed of thin circular dielectric disk under normal incidence

Electromagnetic characterization of a metasurface composed of circular dielectric disks under normal incidence is presented. A dielectric disk is assumed to be infinitesimally thin with moderate values of the relative permittivity so that it can be modeled as an electric dipole. Thus, for the considered infinitesimally thin metasurface, normal electric surface polarization current is negligible. An analytic expression of electric polarizability of a thin circular dielectric disk has been derived for completeness. For most of the presented results, it is assumed that dielectric disk is made of realistic materials. Some interesting applications of realistic metasurfaces as a transparent sheet and a perfect reflector have also been discussed.

Dual-Channel Switchable Metasurface Filters for Compact Spectral Imaging with Deep Compressive Reconstruction.

Spectral imaging technology, which aims to capture images across multiple spectral channels and create a spectral data cube, has been widely utilized in various fields. However, conventional spectral imaging systems face challenges, such as slow acquisition speed and large size. The rapid development of optical metasurfaces, capable of manipulating light fields versatilely and miniaturizing optical components into ultrathin planar devices, offers a promising solution for compact hyperspectral imaging (HSI). This study proposes a compact snapshot compressive spectral imaging (SCSI) system by leveraging the spectral modulations of metasurfaces with dual-channel switchable metasurface filters and employing a deep-learning-based reconstruction algorithm. To achieve compactness, the proposed system integrates dual-channel switchable metasurface filters using twisted nematic liquid crystals (TNLCs) and anisotropic titanium dioxide (TiO2) nanostructures. These thin metasurface filters are closely attached to the image sensor, resulting in a compact system. The TNLCs possess a broadband linear polarization conversion ability, enabling the rapid switching of the incidence polarization state between x-polarization and y-polarization by applying different voltages. This polarization conversion facilitates the generation of two groups of transmittance spectra for wavelength-encoding, providing richer information for spectral data cube reconstruction compared to that of other snapshot compressive spectral imaging techniques. In addition, instead of employing classic iterative compressive sensing (CS) algorithms, an end-to-end residual neural network (ResNet) is utilized to reconstruct the spectral data cube. This neural network leverages the 2-frame snapshot measurements of orthogonal polarization channels. The proposed hyperspectral imaging technology demonstrates superior reconstruction quality and speed compared to those of the traditional compressive hyperspectral image recovery methods. As a result, it is expected that this technology will have substantial implications in various domains, including but not limited to object detection, face recognition, food safety, biomedical imaging, agriculture surveillance, and so on.

Ultra-Wideband Electromagnetic Composite Absorber Based on Pixelated Metasurface with Optimization Algorithm.

An ultra-wideband electromagnetic (EM) absorber is proposed. The proposed absorber consists of two thin metasurfaces, four dielectric layers, a glass fiber reinforced polymer (GFRP), and a carbon fiber reinforced polymer (CFRP) which works as a conductive reflector. The thin metasurfaces are accomplished with 1-bit pixelated patterns and optimized by a genetic algorithm. Composite materials of GFRP and CFRP are incorporated to improve the durability of the proposed absorber. From the full-wave simulation, more than 90% absorption rate bandwidth is computed from 2.2 to 18 GHz such that the fractional bandwidth is about 156% for the incidence angles from 0° to 30°. Absorptivity is measured using the Naval Research Laboratory (NRL) arch method in an EM anechoic environment. It was shown that the measured results correlated with the simulated results. In addition, the proposed absorber underwent high temperature and humidity tests under military environment test conditions in order to investigate its durability.

Wide Dual-Band Circularly Polarized Diecletric Resonator: Innovative Integration of a Single Hybrid Feed and Thin Grounded Metasurface.

This article presents an application of a grounded substrate-based metasurface for hosting dielectric resonators (DRs), enabling a wide dual-band circularly polarized (CP) operation. The antenna structure comprises centrally positioned rectangular DRs, one above the other, along with a 7 × 7 square-slotted metasurface. The metasurface and DRs are hosted above a grounded substrate, which is fed through a single coaxial feed placed at a specific angle, employing a modified upper probe of the coaxial feed. The proposed hybrid technique utilizes the combined benefits of the feed angle and a well-matched metasurface, resulting in performance improvement. Notably, a measured impedance bandwidth of 88.1% for |S11| is achieved within the frequency range of 4.0 GHz to 10.3 GHz. Furthermore, the antenna design exhibits two overlapping measured 3-dB axial ratio (AR) bandwidths: 23.62% from 4.25 GHz to 5.4 GHz and 5.12% from 7.6 GHz to 8 GHz. The peak gain of the antenna is measured at 8.4 dBic. Consequently, this innovative single-feed antenna design, characterized by its compact profile, holds significant potential for realizing multi-band operations. Furthermore, the developed antenna is well-suited for deployment in indoor radio links and INSAT applications.

Rayleigh waves in an elastic half-space with a hard sphere-filled metasurface

In spite of extensive recent research on surface waves in metamaterials, Rayleigh waves with a metasurface layer filled with coated or uncoated hard spheres seem to be explored. In this work, based on an effective medium model for hard sphere-filled metacomposites, an analysis is given for Rayleigh surface waves of an elastic half-space covered by a thin metasurface layer filled with coated or uncoated hard spheres. Explicit Rayleigh wave speed-frequency relation is derived, and the lower and upper bounds of bandgap for Rayleigh waves are determined explicitly. Several examples based on physically relevant material constants are discussed, with clear general conclusions on Rayleigh waves with a thin elastic layer filled with coated or uncoated hard spheres.

Compact and scalable polarimetric self-coherent receiver using a dielectric metasurface

Polarimetric self-coherent systems using direct-detection-based Stokes-vector receivers (SVRs) are a promising technology to meet both the cost and capacity requirements of short-reach optical interconnects. However, conventional SVRs require a number of optical components to detect the state of polarization at high speed, resulting in substantially more complicated receiver configurations compared with the current intensity-modulation–direct-detection counterparts. Here, we demonstrate a simple and compact polarimetric self-coherent receiver based on a thin dielectric metasurface and a photodetector array (PDA). With a single 1.05-µm-thick metasurface device fabricated on a compact silicon-on-quartz chip, we implement functionalities of all the necessary passive components, including a 1×3 splitter, three polarization beam splitters with different polarization bases, and six focusing lenses. Combined with a high-speed PDA, we demonstrate self-coherent transmission of 20-GBd 16-ary quadrature amplitude modulation and 50-GBd quadrature phase-shift keying signals over a 25-km single-mode fiber. Owing to the surface-normal configuration, it can easily be scaled to receive spatially multiplexed channels from a multicore fiber or a fiber bundle, enabling compact and low-cost receiver modules for future highly parallelized self-coherent systems.

A Performance-Enhanced Antenna for Microwave Biomedical Applications by Using Metasurfaces

In this article, we introduce a novel antenna employing specifically designed metasurfaces to improve the radiating performance in close proximity to the human body, as required in microwave biomedical applications. We first present design guidelines to realize a thin metasurface acting as an impedance matching layer between the radiating element and the biological tissue, based on the transmission line equivalent model. Additionally, for the first time to the best of our knowledge, we combine an artificial magnetic conductor (AMC) as the backing element of the antenna, to improve the gain and reduce the undesired back radiation. To validate the proposed approach, we conceived a numerical test-case consisting of a bow-tie antenna operating close to a biological phantom at 2.56 GHz. Numerical simulations demonstrated the performance enhancement in terms of higher field penetration within tissues and better radiating behavior when the bow-tie antenna is working in the presence of both the metasurfaces. Furthermore, measurements carried out over fabricated prototypes confirmed the numerical results, validating the overall design procedure. The herein presented methodology can be helpful in several applications when the radiating elements operate in close proximity to biological tissues, as in medical imaging, on- body communication, mobile phones, and consumer devices.

Realizing efficient asymmetric transmission using optical activity of ultrathin chiral metasurfaces for K‐band applications

AbstractAn elliptical chiral split‐ring‐resonator‐based bilayer thin metasurface is introduced in this paper. The proposed metasurface realizes strong electromagnetic (EM) activity with asymmetric transmission in the K‐band of the microwave regime. The efficiency is more than 80% over a range of frequencies from 18.6 to 20.8 GHz. Angular stability up to 60° makes the structure robust for practical applications. The structure also exhibits a negative refractive index for circularly polarized wave due to the strong chirality factor. Polarization azimuth rotation angle of 90° and ellipticity of 0° reveal the pure EM/optical activity. Furthermore, the simulation and measured results also affirmed orthogonal pure linear polarization transformation. The proposed chiral metasurface finds applications in radar and satellite belonging to K‐band.

Metasurface supporting quasi-BIC for optical trapping and Raman-spectroscopy of biological nanoparticles.

Optical trapping combined with Raman spectroscopy have opened new possibilities for analyzing biological nanoparticles. Conventional optical tweezers have proven successful for trapping of a single or a few particles. However, the method is slow and cannot be used for the smallest particles. Thus, it is not adapted to analyze a large number of nanoparticles, which is necessary to get statistically valid data. Here, we propose quasi-bound states in the continuum (quasi-BICs) in a silicon nitride (Si3N4) metasurface to trap smaller particles and many simultaneously. The quasi-BIC metasurface contains multiple zones with high field-enhancement ('hotspots') at a wavelength of 785 nm, where a single nanoparticle can be trapped at each hotspot. We numerically investigate the optical trapping of a type of biological nanoparticles, namely extracellular vesicles (EVs), and study how their presence influences the resonance behavior of the quasi-BIC. It is found that perturbation theory and a semi-analytical expression give good estimates for the resonance wavelength and minimum of the potential well, as a function of the particle radius. This wavelength is slightly shifted relative to the resonance of the metasurface without trapped particles. The simulations show that the Q-factor can be increased by using a thin metasurface. The thickness of the layer and the asymmetry of the unit cell can thus be used to get a high Q-factor. Our findings show the tight fabrication tolerances necessary to make the metasurface. If these can be overcome, the proposed metasurface can be used for a lab-on-a-chip for mass-analysis of biological nanoparticles.

Multifunctional Full-Space Metahologram Employing a Monolayer Phase-Encoding Metasurface

Full-space metasurfaces exhibit considerable capacities in the fields of electromagnetic wave-front tailoring due to their functional and spatial integration, and extensive applications in modern communication systems. However, almost all metasurfaces for wave-front tailoring are implemented by multilayer dielectric cascade structures, which not only present imperfections in the cost and manufacturing process, but are also detrimental to integration. As such, it is highly desirable to actualize a high-performance metasurface that merely relies on elaborated designs and simple manufacturing process. This study combines frequency multiplexing, spatial channel multiplexing, and polarization multiplexing to propose a full-space metahologram with four different information channels based on a thin double-face copper-cladded metasurface. Exploiting the propagation phase, linear-polarized incident waves can be independently manipulated for the reflection semispace. Integrating the Pancharatnam-Berry (PB) phase, circular-polarized incident waves are tailored for the transmission semispace. To validate the concept, a metahologram sample is fabricated and tested. The experimental results are fully consistent with theoretical calculations and numerical simulation results. The metasurface has a useful role in multifunctional metadevices, and paves the way for potential applications in the fields of antennas and communication systems.

Omnidirectional, thin metasurface exhibiting selective absorption for un-polarized broadband incidence.

Thin devices with large areas have strong and omnidirectional absorption over a wide bandwidth and are in demand for applications such as energy harvesting, structural color, and vehicle LiDAR (laser detection and ranging). Despite persistent efforts in the design and fabrication of such devices, the simultaneous realization of all these desired properties remains a challenge. In this study, a 190-nm-thick metasurface with an area of 3 cm2, incorporating dielectric cylinder arrays, a chromium layer, a silicon nitride (SiNx) layer, and an aluminum layer is theoretically and experimentally demonstrated. The developed device achieves an average absorptivity of ∼99% (97% in the experiment) in the entire visible spectrum 400-700 nm. Moreover, it exhibits strong absorption over a wide range of incident angles (∼91% and 90% at 60° in the calculation and experiment, respectively). Importantly, the feasibility of applying the developed metasurface absorber to solar thermophotovoltaics and vehicle LiDAR (laser detection and ranging) has been explored. Moreover, the photoresist can be replaced by other glues and easily scaled up to a large area using the roll-to-roll nanoimprinting process. With the excellent spectral properties and performance, this device is promising for large-area applications.

Flexible microfluidic nanoplasmonic sensors for refreshable and portable recognition of sweat biochemical fingerprint

Wearable sweat sensors with various sensing systems can provide noninvasive medical diagnostics and healthcare monitoring. Here, we demonstrate a wearable microfluidic nanoplasmonic sensor capable of refreshable and portable recognition fingerprint information of targeted biomarkers including urea, lactate, and pH in sweat. A miniature, thin plasmonic metasurface with homogeneous mushroom-shaped hot spots and high surface-enhanced Raman scattering (SERS) activity is designed and integrated into a microfluidics platform. Compared to conventional wearable SERS platforms with the risk of mixed effect between new and old sweat, the microfluidic SERS system allows sweat administration in a controllable and high temporal-resolution fashion, providing refreshable SERS analysis. We use a portable and customized Raman analyzer with a friendly human-machine interface for portable recognition of the spectroscopic signatures of sweat biomarkers. This study integrates epidermal microfluidics with portable SERS molecular recognition, presenting a controllable, handy, and dynamical biofluid sensing system for personalized medicine.