Differential Scanning Calorimetry Thermogravimetric Analysis Research Articles

Nano silicated-FeAl2O4 functionalized by DL-alaninium nitrate ionic liquid (FeAl2O4-SiO2@[DL-Ala][NO3]) as versatile promotor for aqua-mediated synthesis of spiro[chromenopyrazole-indene-triones and spiro[chromenopyrazole-indoline-diones

In this work, the spinel FeAl2O4 was prepared and functionalized step-by-step with silica and alaninium nitrate ionic liquid ([DL-Ala][NO3]) to produce a bio-based multi-layered nanostructure (nano FeAl2O4-SiO2@[DL-Ala][NO3]). The obtained magnetized inorganic-bioorganic nanohybrid characterized by Fourier transform infrared spectroscopy (FT-IR), vibrating-sample magnetometry (VSM), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDAX), transmission electron microscopy (TEM), thermogravimetric analysis/differential scanning calorimetry (TGA/DSC), X-ray fluorescence (XRF), and X-Ray diffraction (XRD) analysis. A facile synthesis of some tricyclic dihydro-spiro[chromeno[2,3-c]pyrazole-4,2′-indene]triones and dihydro-spiro[chromeno[2,3-c]pyrazole-4,3′-indoline]diones via domino four-component one-pot reaction of various hydrazine derivatives, ethyl acetoacetate, heterocyclic 1,2-ketones (ninhydrin, isatin, 5-bromoisatin) and cyclic 1,3-diketones (dimedone and 1,3-cyclohexanedine), examined in the presence of nano FeAl2O4-SiO2@[DL-Ala][NO3] nanohybrid in refluxing aqueous media, successfully. The multi-aspect characteristics of the nanohybrid which consist of magnetized inorganic and bioorganic parts, could be the reason of its special catalytic efficacy. The recovery and reusability of the FeAl2O4-SiO2@[DL-Ala][NO3] magnetized nanoparticles (MNPs) were performed in two runs without significant activity loss.

Elaborating NH-Bridged Nitrogen-Rich Energetic Materials via Base-Mediated Dimroth Rearrangement: Synthesis, Characterization, and Performance Study.

The pursuit of heat-resistant energetic materials featuring high thermostability and energy has gained keen interest in recent years owing to their use in coal mining and aerospace domains. In this study, we synthesized 4-((4,6-diamino-1,3,5-triazin-2-yl) amino)-1H-1,2,3-triazole-5-carbonitrile (6) and its perchlorate and nitrate energetic salts (6a and 6b) by incorporating amino bridging (-NH-) using the Dimroth rearrangement (DR) from inexpensive starting materials as a heat-resistant energetic materials. All of the compounds were thoroughly characterized by infrared (IR), NMR, elemental analysis (EA), high-resolution mass spectrometry (HRMS), and thermogravimetric analysis-differential scanning calorimetry (TGA-DSC) studies. Compounds 6a and 6b showed good densities (1.81 and 1.80 g cm-3), detonation performance (VOD = 7505 and 8257 m s-1, DP = 23.47 and 24.41 GPa), insensitivity to mechanical stimuli (IS = 40 J and FS = >360 N), and excellent thermal stability (Td = 307 and 334 °C), surpassing presently used heat-resistant explosive HNS (318 °C). The molecular electrostatic potentials and noncovalent interactions were pursued to understand possible interaction sites and structure-directing interactions in these salts. Their facile synthetic approach, good energetic performance, and outstanding thermal stability indicate that they are the ideal combination for replacing current benchmark heat-resistant explosive HNS. Additionally, this study highlights the use of classical DR for making new energetic materials with fine-tuned properties.

Synthesis, characterization and structural analysis of complexes from 2,2':6',2''-terpyridine derivatives with transition metals.

The synthesis and structural characterization of three families of coordination complexes synthesized from 4'-phenyl-2,2':6',2''-terpyridine (8, Ph-TPY), 4'-(4-chlorophenyl)-2,2':6',2''-terpyridine (9, ClPh-TPY) and 4'-(4-methoxyphenyl)-2,2':6',2''-terpyridine (10, MeOPh-TPY) ligands with the divalent metals Co2+, Fe2+, Mn2+ and Ni2+ are reported. The compounds were synthesized from a 1:2 mixture of the metal and ligand, resulting in a series of complexes with the general formula [M(R-TPY)2](ClO4)2 (where M= Co2+, Fe2+, Mn2+ and Ni2+, and R-TPY= Ph-TPY, ClPh-TPY and MeOPh-TPY). The general formula and structural and supramolecular features were determinated by single-crystal X-ray diffraction for bis(4'-phenyl-2,2':6',2''-terpyridine)nickel(II) bis(perchlorate), [Ni(C21H15N3)2](ClO4)2 or [Ni(Ph-TPY)2](ClO4)2, bis[4'-(4-methoxyphenyl)-2,2':6',2''-terpyridine]manganese(II) bis(perchlorate), [Mn(C22H17N3O)2](ClO4)2 or [Mn(MeOPh-TPY)2](ClO4)2, and bis(4'-phenyl-2,2':6',2''-terpyridine)manganese(II) bis(perchlorate), [Mn(C21H15N3)2](ClO4)2 or [Mn(Ph-TPY)2](ClO4)2. In all three cases, the complexes present distorted octahedral coordination polyhedra and the crystal packing is determined mainly by weak C-H...π interactions. All the compounds (except for the Ni derivatives, for which FT-IR, UV-Vis and thermal analysis are reported) were fully characterized by spectroscopic (FT-IR, UV-Vis and NMR spectroscopy) and thermal (TGA-DSC, thermogravimetric analysis-differential scanning calorimetry) methods.

Synthesis of Cu-MOF-derived complex copper–chromium oxides and their catalytic study on the thermal decomposition of ammonium perchlorate

In this work, a series of complex copper-chromium oxides were prepared by adjusting the molar ratio of Cr3+/Cu2+ using MOF-199 as a template. X-ray diffraction (XRD), scanning electron microscopy (SEM), Transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) were used to characterize the structure, microscopic morphology and valence information of the samples. The specific surface area of the sample was estimated by the Brunauer-Emmett-Teller method (BET), and the pore size parameters of the sample were obtained by using the Barrett-Joyner-Halenda (BJH) model. The effect of the samples on the thermal decomposition process of ammonium perchlorate (AP) was investigated by differential scanning calorimetry-thermogravimetric analysis. The results show that the copper and chromium oxides in the complex exhibit good catalytic effects. Among them, CuCr(0.8) had the best catalytic effect, reducing the peak pyrolysis temperature of AP by 95.7 °C, increasing the heat release by 817 J/g, and reducing the reaction activation energy by 62.4 kJ/mol. Real-time FTIR was used to characterize the gas products during the thermal decomposition of AP, and the gas products of AP with CuCr(0.8) catalyst were different from those of pure AP, which may also be the reason for the increase of AP heat release after adding CuCr(0.8) catalyst.

Trinitromethyl-Substituted 1H-1,2,4-Triazole Bridging Nitropyrazole: A Strategy of Utterly Manipulable Nitration Achieving High-Energy Density Material.

Nitro groups have been demonstrated to play a decisive role in the development of the most powerful known energetic materials. Two trinitromethyl-substituted 1H-1,2,4-triazole bridging nitropyrazoles were first synthesized by straightforward routes and were characterized by chemical (MS, NMR, IR spectroscopy, and single-crystal X-ray diffraction) and experimental analysis (sensitivity toward friction, impact, and differential scanning calorimetry-thermogravimetric analysis test). Their detonation properties (detonation pressure, detonation velocity, etc.) were predicted by the EXPLO5 package based on the crystal density and calculated heat of formation with Gaussian 09. These new trinitromethyl triazoles were found to show suitable sensitivities, high density, and highly positive heat of formation. The combination of exceedingly high performances superior to those of HMX (1,3,5,7-tetranitrotetraazacyclooctane), and its straightforward preparation highlights compound 8 as a promising high-energy density material (HEDM). This work supports the effectivity of utterly manipulable nitration and provides a generalizable design synthesis strategy for developing new HEDMs.

Kinetic Analysis of the Reaction of Micrometer-Sized Al-Mg Alloy Particles in a Water Vapor Atmosphere.

This study investigated the reaction mechanism of aluminum-magnesium (Al-Mg) alloy particles with water (Al-Mg/H2O) through thermogravimetric analysis-differential scanning calorimetry experiments and kinetic analysis using isoconversional methods and the master plot technique to determine the reaction mechanism function, with the aim of providing insights to support metal powder/water ramjet engine design and combustion characteristics. The results showed that the Al-Mg/H2O reaction occurred in two distinct stages, with stage 1 primarily involving the reaction of Mg elements in the L(Al-Mg) alloy with water while Al played a leading role in stage 2. Notably, the reaction temperatures of Al-Mg particles were significantly lower than those for either Al or Mg particles alone in a water vapor environment. Additionally, the activation energy of stage 1 was lower than that for the individual Al and Mg particles and decreased with increasing Mg content in stage 2. Furthermore, the concentration of Mg in the alloy was found to have a major influence on the reaction mechanism, which followed a random nucleation and growth model. Overall, this work elucidated an alternating endothermic and exothermic staged reaction process for Al-Mg/H2O dominated first by Mg and then Al with kinetic insights providing theoretical support for optimizing Al-Mg alloy compositions for improved ignition and combustion performance in metal powder/water ramjet engines.

Research on the inerting mechanism of sucrose dust explosion by sodium bicarbonate

Sucrose dust is prone to explosion accidents during the production process. This research utilized sodium bicarbonate (NaHCO3) to prevent the explosion of sucrose dust. Based on the minimum ignition temperature of sucrose dust cloud (MITc), combined with thermogravimetric analysis-differential scanning calorimetry (TG-DSC) and pyrolysis-gas chromatography-mass spectrometry (PY-GCMS), the differences of combustion processes and combustion products between sucrose dust and sucrose-NaHCO3 mixed dust were comprehensively compared. Also, the mechanisms of sucrose dust explosion and NaHCO3 inerting sucrose dust were systematically studied. It showed that NaHCO3 powder contributed to a higher MITc of sucrose dust and activation energy of sucrose oxidation reaction, with a reduction in exothermic enthalpy and entropy changes. NaHCO3 interfered with the entire burning process of sucrose dust by playing an important role in physical inhibition, and producing sodium-containing compounds to capture free radicals from the bond breakage of sucrose. It limits the reaction pathway and progress of sucrose pyrolysis and therefore against burning. Additionally, the mass fraction and particle size of NaHCO3 impact the inerting ability by increasing the amount and accelerating the procedure rate of products, respectively. The increase in mass fraction works better in macroscopic phenomena, while the decrease in particle size is more significant in reaction kinetics and thermodynamic parameters.

Fabrication of Al@AIH@PVDF metastable composite film with enhanced laser ignition ability and combustion performance

Laser ignition technology has garnered significant attention for energetic materials in recent years, offering advantages over traditional electrical initiation methods, notably in mitigating issues related to stray currents and electromagnetic interference. Moreover, it can facilitate multi-point synchronous ignition. However, the persistent challenges of high ignition thresholds and delays in energetic materials necessitate effective resolutions. In this study, we address these challenges by converting the inert Al2O3 layer on the surface of aluminum powder into the active compound Aluminum Iodate Hexahydrate ([Al(H2O)6](IO3)3(HIO3)2, AIH) to prepare an Al@AIH@PVDF energetic composite film (ECF) with the aim of reducing the laser ignition threshold and delay of Al@PVDF ECF. The Al@AIH@PVDF ECF was synthesized through a simple wet chemistry method and a rapid evaporation process suing a simple, environmental-friendly, and cost-effective way. Differential scanning calorimetry-thermogravimetric analysis (DSC-TG) results demonstrate a lower exothermic reaction temperature (161 °C) and higher heat release (2900 J g−1) for Al@AIH@PVDF ECF. Laser ignition tests reveal a reduced laser ignition delay (11 ms) and threshold (1.59 J cm−2) for Al@AIH@PVDF ECF. Combustion experiments showcase elevated combustion flame temperature (3090 K), burning rate (4.11 cm s−1), and smaller condensed combustion products, while effectively igniting CL-20. Pressure tests indicate higher maximum combustion pressure (3.24 MPa) and pressure rise rate (4.05 GPa s−1) for Al@AIH@PVDF ECF. Finally, the reaction process and mechanism of Al@AIH@PVDF ECF was also investigated and proposed.

Tin-antimony/carbon composite porous fibers: electrospinning synthesis and application in sodium-ion batteries

In this work, tin-antimony/carbon composites porous fibers were successfully synthesized by an electrospinning method combined with two-step heat treatment processes, in which SnCl2 and SbCl3 were used as tin and antimony sources, and polyacrylonitrile (PAN) and polymethyl methacrylate (PMMA) were used as binders and pore-forming agents. The as-synthesized tin-antimony/carbon composites were systematically characterized by x-ray Diffraction (XRD), Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM), Energy-Dispersive Spectrometer (EDS), x-ray Photoelectron Spectroscopy (XPS), and Thermogravimetric Analysis-Differential Scanning Calorimetry (TG-DSC). The results indicate that the composite material consists of one-dimensional nitrogen-doped carbon porous fibers as the main matrix, with a three-dimensional network structure in which Sn, SnO2, and SnSb particles are encapsulated. Furthermore, the tin-antimony/carbon composites porous fibers were utilized as self-supported negative electrode for sodium-ion batteries. The results showed that the SNbM-2 sample electrode calcined at 800 °C demonstrated the best cycling stability and rate capability among all the sample electrodes, with a discharge capacity of 319.5 mAh·g−1 maintained after 100 cycles at a current density of 0.1 A·g−1. The excellent electrochemical performance of the SNbM-2 sample electrode is benefited from its unique porous structure and the carbon fiber network structure encapsulating Sn, SnO2, and SnSb particles, which could effectively shorten the Na+ ion transport distance and mitigate electrode volume expansion.

Pozzolanic performance and characteristic analysis of binary blended cement incorporating ceramic polishing sludge

The waste generated during ceramic polishing is typically disposed of in landfills rather than being recycled within the production facility, potentially causing environmental harm. This study aims to enhance industrial waste utilization and reduce CO2 emissions in the cement industry by investigating the feasibility of incorporating ceramic sludge from polishing processes into an innovative binary blended cement. Different binders were prepared with varying amounts of ceramic polishing sludge (CPS), ranging from 10% to 50%, and tested against the ASTM C595 standards. The results were compared with those of ordinary Portland cement (OPC). This approach involves evaluating the pozzolanic activity and conducting an advanced characterization assessment of CPS and binary blended ceramic polishing sludge cement (CPSC) paste. This study employed a combination of physical, mechanical, and chemical tests, including setting time, particle size distribution (PSD), Brunauer-Emmett-Teller (BET) specific surface area, compressive strength, X-ray diffraction (XRD), scanning electron microscopy (SEM), heat of hydration, and differential scanning calorimetry/thermogravimetric analysis (DSC/TGA). The results indicated that CPS can be used as a pozzolanic material to create innovative binders with properties comparable to those of OPC. The Strength Activity Index (SAI) values affirmed the pozzolanic properties of CPS, exceeding 75% for up to 40% CPS replacement. Incorporating CPS in the blended cement resulted in a slower rate of cement hydration, leading to prolonged setting times and reduced early strength development. Although the compressive strength decreased with increasing CPS content, it remained within the acceptable ASTM C595 limits with up to 50% replacement. Nevertheless, the optimal replacement level of OPC with CPS was determined to be 50%. Furthermore, CPS substitution reduced the dry density and improved the water absorption and apparent porosity, reflecting microstructural changes. The SEM images revealed that the blended CPSC had a lower apparent porosity than the pure OPC. The DSC/TGA analysis demonstrated that the blended cement had a lower calcium hydroxide content and higher silica than pure OPC.

Facile synthesis and physical properties of magnesium dititanate nanoparticles for antibacterial applications

AbstractThe modified aqueous co-precipitation approach was used to successfully manufacture magnesium dititanate (MgTi2O5) nanoparticles. Thermogravimetric analysis/differential scanning calorimetry (TG/DSC) was used to clearly reveal the thermal stability. Moreover, pseudobrookite structure, and surface morphology of MgTi2O5 nanoparticles were determined using X-ray diffraction (XRD), transmission electron microscope (TEM), and Fourier-transform infrared (FT-IR), and scanning electron microscope (SEM) techniques, respectively. The average size of the crystallites calculated by Scherer approach was compared to Williamson-Hall and TEM images results. The optical band gap of MgTi2O5 nanoparticles was found to be 3.81 eV for direct transitions. The effect of temperature on the conductivity of DC electricity was tested between the rages 303–503 K. The data on antibacterial activity showed that MgTi2O5 nanoparticles were antimicrobial and stopped the test microorganisms from growing. These findings revealed that MgTi2O5 will be extensively promising in environmental pollution control and antibacterial research.

Impact of preparation methods on the performance of Cu/Ni/Zr catalysts for methanol decomposition

Utilizing waste heat from engine exhausts to decompose methanol into a hydrogen (H2) and carbon monoxide (CO) mixture, subsequently reintroduced into the engine, offers a significant potential to enhance engine efficiency and reduce emissions. The efficacy of the catalyst is crucial, as it directly influences the composition of the decomposition gases, thereby impacting energy conservation and emissions reduction. This study investigates the impact of various preparation methods for the self-developed Cu/Ni/Zr catalyst for methanol hydrogenation decomposition. These techniques include the co-precipitation method, co-impregnation method, and citrate complexation method, evaluated within a temperature spectrum of 220 °C–320 °C. Employing analytical methods such as x-ray Photoelectron Spectroscopy (XPS), x-ray Diffraction (XRD), Thermogravimetric Analysis-Differential Scanning Calorimetry (TGA-DSC), Brunauer–Emmett–Teller (BET), Temperature-Programmed Reduction (TPR), and Scanning Electron Microscopy (SEM) analysis, the study elucidates the mechanism of methanol decomposition catalyzed by Cu/Ni/Zr. The findings indicate that the catalyst’s activity, in terms of decomposition rate and hydrogen content, ranks in descending order from the co-impregnation method, followed by the citrate complexation method, to the co-precipitation method.

Biopolymer hydrogel matrices for the stabilization and in-vitro delivery of anti-cancer polyoxometalate [CoW11O39(CpTi)]7−

In the present study, the polyoxometalate (POM), [CoW11O39(CpTi)]7−, known for its significant anti-cancer activity and relatively low toxicity compared to established organic drugs such as CP and 5FU, is investigated. However, it is acknowledged that POMs inherently exhibit toxicity to living cells due to the presence of heavy and toxic metal ions within their core structures and their limited selectivity toward biological targets. Consequently, a methodology to mitigate this toxicity is sought by encapsulating these POMs within hydrogel matrices, with the intention to facilitate slow, sustained release and enhanced target specificity. In this study, the hydrogel of the well-researched anti-cancer POM, K6H[CoW11O39(CpTi)] (hereafter abbreviated as CoW11CpTi), is synthesized through the electrostatic interaction of the positively charged carboxymethyl chitosan (CMC), carboxymethyl cellulose (CMCell), and gelatin, which serve as hydrogelators. Subsequent characterization of the resultant CMC-CoW11CpTi, CMCell-CoW11CpTi, and gelatin-CoW11CpTi gels is performed utilizing Fourier Transform Infrared Spectroscopy (FT-IR), Differential Scanning Calorimetry/Thermogravimetric Analysis (DSC/TGA), Electron Spin Resonance (ESR) Spectroscopy, Scanning Electron Microscopy (SEM), and Tgel analysis. Among these, the gelatin-CoW11CpTi gel demonstrates the highest stability, retaining its structural integrity for in excess of 10 days. In addition, cytotoxicity assays are conducted on an assortment of cell lines including NRK52e (Rattus norvegicus kidney cell line), MDA-MB-231 (human breast adenocarcinoma), and MCF-7 (human breast epithelial adenocarcinoma). It is observed that the release of POM from the hydrogel matrices under physiological pH conditions exhibits a slow and sustained profile. This study therefore offers a promising approach for the effective delivery of POMs in cancer therapy.

Preparation of [BMIM]HSO4@SiO2 Ionic Liquid Microcapsules and Application to CO2 Adsorption

Carbon emissions are closely related to global climate change and have gradually become a focus of attention. Carbon capture is an effective way to reduce carbon emissions, ionic liquid microcapsules (ILM) have great potential as a CO2 capture material. [BMIM]HSO4@SiO2 ionic liquid microcapsules were prepared by in situ polymerization, and the microcapsule samples were characterized using thermo-gravimetric analysis & differential scanning calorimetry (TG/DSC), scanning electron microscopy (SEM), laser particle size analysis and surface area analyser. The microcapsules on the CO2 adsorption properties were investigated. The results showed that the microcapsule particles have a smooth spherical morphology and uniform size, the average particle size was 146 μm. The TG/DSC showed the microcapsules have better thermal stability. From 273 K isothermal adsorption curve of microcapsules, the sample can reach the maximum adsorption capacity of 4.87 cm3/g STP (standard pressure).

Research on even-odd effects of bio-based Nylon nF salts

Nylon nF is a type of bio-based Nylon, whose raw materials NH2-(CH2)n-NH2 and 2,5-furandicarboxylic acid (FDCA) are both prepared by biological methods. The Nylon nF salts (PAnF salts) are the monomer salts before the polymerization of Nylon nF, whose product quality has a significant impact on the properties of Nylon nF. In this study, Nylon nF salts of FDCA and seven NH2-(CH2)n-NH2 diamines were synthesized. The crystal structures and thermodynamic behaviors of these Nylon salts were determined and analyzed by single crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD), and thermogravimetric analysis-differential scanning calorimetry (TG-DSC). Based on the analysis of melting point and solubility data, it was found that there is a significant even–odd effect between Nylon nF salts (n = 4–10). Moreover, the lattice energy and solvation energy in methanol of these Nylon salts were calculated by Materials Studio (MS) and Gaussian, respectively. The results indicated that there was also an even–odd effect in the lattice energy of Nylon nF salts. It is speculated that these even–odd phenomena were related to the symmetry of the ligand diamines and the stacking mode of Nylon salts. The study of the even–odd effect is significant in predicting and designing the physicochemical properties of cocrystals.

Impact of H2O on CO2 adsorption and co-adsorption: Mechanism and high-performance adsorbents for efficient H2O-CO2 capture

Physical adsorbents used for CO2 capture from air directly and wet CO2 flue gas have limited effectiveness due to competitive adsorption of H2O and CO2. Therefore, it is crucial to understand the impact of H2O on CO2 adsorption and investigate the co-adsorption mechanism in order to enhance the screening, design, and optimization of carbon capture systems. Herein, heat treatments are performed on commercial NaX zeolites to modify the composition of the O-T-O (T = Al, Si) framework. Our systematic investigation based on thermogravimetric analysis/differential scanning calorimetry (TG-DSC), infrared spectroscopy (IR), solid-state nuclear magnetic resonance (SSNMR), and density-functional theory (DFT) calculation, the connection between the structure of NaX zeolite and H2O and CO2 adsorption/desorption is established. The heat-induced changes in the O-T-O (T = Al, Si) framework produce movements of the loaded Na+ ions. Hydrogen bonds formed by agglomerated adsorbed H2O constitute the primary source of desorption heat, which adversely affects CO2 mass transfer and adsorption. Our findings illustrate that modifying the distribution of Na+ ions in the O-T-O (T = Al, Si) framework can reduce the CO2 adsorption energy and prevent the formation of water agglomerates. Our findings provide insights into the design of efficient and high-capacity adsorbents for CO2 capture that can be operated in the presence of H2O.

Synthesis and mechanism study of an environmentally friendly filtrate reducing agent from humic acid and organic silicon

AbstractIn this study, organic silicon was introduced to humic acid for the first time, and set the novel polymer NaHm/AMPS/AM/TSP‐L12 (HASSi) as an environmentally friendly filtrate reducing agent, which was developed by using silica modified material (TSP‐L12), sodium humic acid (NaHm), 2‐acrylamido‐2‐methylpropanesulfonic acid sodium (AMPS), and acrylamide (AM) as raw materials. The molecular structure, chemical composition of HASSi has been investigated and results show that HASSi shows the chemical structure was conformed to the molecular design. Differential scanning calorimetry–thermogravimetric analysis results illustrate that thermal decomposition temperature of HASSi under nitrogen was 250°C. Though temperature resistance evaluations, HASSi could withstand temperature up to 230°C. Salt and calcium resistance evaluations confirmed its resistance of NaCl could reach up to 5% and CaCl2 to 0.5%. The filtrate reduce mechanism of HASSi was investigated through various methods, including scanning electron microscope analysis of HASSi aqueous solution, microstructure of filter cake, measurements of zeta potential, and particle size distribution, results showed that HASSi participation in the formation of mud cakes and illustrated an excellent filtration reduction effect. In addition, HASSi was identified as an environmentally friendly filter loss reducing agent through environmental performance evaluation, which shows a great application prospect in oilfield.

Optical and luminescent characteristics of thermally stable new Eu3+ doped potassium tungstate tellurite glasses for epoxy-free luminescent devices

Transparent, Eu3+ doped potassium tungstate tellurite (TKWZBiEu) glass matrices were successfully synthesized via employing the traditional melt quenching method and their thermal, structural and photoluminescent characteristics were thoroughly investigated. To estimate the aggregate weight loss, glass transition temperature (Tg) and thermal stability factor (ΔT) of the prepared host glass matrix, thermogravimetric analysis-differential scanning calorimetry (TGA-DSC) were utilized. The non-crystalline character of the prepared TKWZBiEu glass was studied via XRD profile. Various vibrational functional groups were revealed via employing Fourier transform infrared (FT-IR) spectroscopy. The optical bandgap (Eopt) values for all prepared TKWZBiEu glasses have been evaluated by employing the absorption spectra. Under n-UV and blue excitations, all the prepared TKWZBiEu glasses are demonstrating reddish emission at 614 nm ascribed to the 5D0 → 7F2 transition, in which the intensity is increasing continuously with Eu3+ ion content up to 5.0 mol%. The experimental lifetime (τ) profiles demonstrate the single-exponential nature of prepared TKWZBiEu glasses under n-UV excitation. Furthermore, temperature dependent photoluminescence (TDPL) spectra indicate excellent thermal stability of the TKWZBiEu glass matrix with the highest value of activation energy (ΔE). The prototype organic epoxy resin/binder-free device has been developed using the 5.0 mol% Eu3+ doped with TKWZBi glass matrix and n-UV LED chip. All the aforementioned findings validate that the optimized TKWZBiEu glass is an auspicious candidate for the red component to fabricate organic epoxy-free w-LEDs.

Thermally Inducing Viscous Fluids to Generate Co-Based Perovskites Enriched with Active Species for the Removal of VOCs.

Various Co-based perovskites are synthesized through thermally driving viscous fluids. In this process, rare earth salts, cobalt salts, and citric acid do not require homogeneous mixing but only need to be heated until they melt into a molten viscous slurry. The physicochemical properties of cobalt-based perovskites were examined using techniques such as X-ray diffraction (XRD), electron paramagnetic resonance (EPR), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-Mapping-EDS), X-ray photoelectron spectroscopy (XPS), hydrogen temperature-programmed reduction (H2-TPR), oxygen temperature-programmed desorption (O2-TPD), and N2 adsorption-desorption. The results indicate that the surface-active species can be controlled by altering the A-site elements of cobalt-based perovskites. All catalysts synthesized through the thermal treatment of viscous mixtures exhibited a low activation temperature and a low apparent activation energy for the catalytic oxidation of toluene. Among all cobalt-based perovskites, LaCoO3 demonstrated the most outstanding catalytic activity, primarily attributed to its capacity to expose a larger number of surface-active sites and oxygen species, as well as its superior reducibility. Furthermore, the formation process of optimal LaCoO3 was monitored using thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), and the byproducts of the low-temperature catalytic oxidation of toluene by the catalyst were identified using gas chromatography-mass spectrometry (GC-MS). The possible mechanism of toluene oxidation was inferred by in situ diffuse reflection infrared Fourier transform spectroscopy (DRIFTS). Moreover, LaCoO3 exhibits a predominant resistance to high-temperature hydrothermal conditions. This work provides a scalable and innovative approach to fabricating exceptionally effective catalysts for the efficient purification of VOCs.

Performance and Mechanism of Using Low-Cost Fumed Silica Nanoparticles in Enhancing High Viscosity Modified Asphalt

Fumed silica nanoparticles (FSNPs) have shown significant potential in polymer modification due to their economic viability. This study aims to explore the impact of FSNPs on the performance of high viscosity modified asphalt (HVMA). For a comprehensive view, we also introduced Nano-SiO2 and Nano-TiO2, common nano-modifiers, for comparison with the results achieved by FSNPs. The morphology of these nano-modifiers was observed with Field Emission Scanning Electron Microscopy (FESEM). The changes in rheological, chemical, and thermal properties of HVMA before and after modification were evaluated using techniques such as Dynamic Shear Rheometer (DSR), Fluorescence Microscope, Fourier Transform Infrared Spectroscopy (FTIR), and Thermogravimetric Analysis-Differential Scanning Calorimetry (TGA-DSC). The FESEM results revealed that FSNPs form a branchlike network while Nano-SiO2 and Nano-TiO2 lack specific structures or clear interconnections. Further rheological testing reveals that, when compared to Nano-SiO2 and Nano-TiO2, FSNPs improve the high-temperature performance of HVMA by 2–3 times and bolster its fatigue resistance by 1.2–3 times, while reducing temperature sensitivity. These enhancements are attributed to the synergistic strengthening between the FSNP's branchlike network and the SBS polymer network structure, underlining the significance of FSNPs' shape and connectivity in HVMA rheological property improvement.