Thermoelectric Generator Module Research Articles

Metal-Halogen Interactions Inducing Phase Separation for Self-Healing and Tough Ionogels with Tunable Thermoelectric Performance.

Ionic liquid-based thermoelectric gels become a compelling candidate for thermoelectric power generation and sensing due to their giant thermopower, good thermal stability, high flexibility, and low-cost production. However, the materials reported to date suffer from canonical trade-offs between self-healing ability, stretchability, strength, and ionic conductivity. Herein, a self-healing and tough ionogel (PEO/LiTFSI/EmimCl) with tunable thermoelectric properties by tailoring metal-halogen bonding interactions, is developed. Different affinities between polymer matrix and salts are exploited to induce phase separation, resulting in simultaneous enhancement of ionic conductivity and mechanical strength. Molecular dynamics (MD) simulations and spectroscopic analyses show that Cl- ions impair the lithium-ether oxygen coordination, leading to changes in chain conformation. The migration difference between cations and anions is thus widened and a transition from n-type to p-type thermoelectric ionogels is realized. Furthermore, the dynamic interactions of metal-ligand coordination and hydrogen bonding yield autonomously self-healing capability, large stretchability (2000%), and environment-friendly recyclability. Benefiting from these fascinating properties, the multifunctional PEO-based ionogels are applied in sensors, supercapacitors, and thermoelectric power generation modules. The strategy of tuning solvation dominance to address the trade-offs in thermoelectric ionogels and optimize their macroscopic properties offers new possibilities for the design of advanced ionogels.

Study of an LLC Converter for Thermoelectric Waste Heat Recovery Integration in Shipboard Microgrids

Static waste heat recovery, by means of thermoelectric generator (TEG) modules, constitutes a fast-growing energy harvesting technology on the way towards greener transportation. Many commercial solutions are already available for small internal combustion engine (ICE) vehicles, whereas further development and cost reductions of TEG devices expand their applicability at higher-power transportation means (i.e., ships and aircrafts). In this light, the integration of waste heat recovery based on TEG modules in a shipboard distribution network is studied in this work. Several voltage step-up techniques are considered, whereas the most suitable ones are assessed via the LTspice simulation platform. The design procedure of the selected LLC resonant converter is presented and analyzed in detail. Furthermore, a flexible control strategy is proposed, capable of either output voltage regulation (constant voltage) or maximum power point tracking (MPPT), according to the application demands. Finally, both simulations and experiments (on a suitable laboratory testbench) are performed. The obtained measurements indicate the high efficiency that can be achieved with the LLC converter for a wide operating area as well as the functionality and adequate performance of the control scheme in both operating conditions.

High-Performance W-Doped Bi0.5Sb1.5Te3 Flexible Thermoelectric Films and Generators.

Bi-Sb-Te-based thermoelectric materials have the best room-temperature thermoelectric properties, but their inherent brittleness and rigidity limit their application in the wearable field. In this study, W-doped p-type Bi0.5Sb1.5Te3 (W-BST) thin films were prepared using magnetron sputtering on polyimide substrates to create thermoelectric generators (TEGs). Bending tests showed that the thin film has excellent flexibility and mechanical durability, meeting the flexible requirements of wearable devices. W doping can significantly increase the carrier concentration, Seebeck coefficient, and electrical conductivity of BST thin films. At 300 K, the power factor of the W-BST film is 2.25 times higher than that of the undoped film, reaching 13.75 μW cm-1 K-2. First-principles calculations showed that W doping introduces significant impurity peaks in the bandgap, in which W d electrons remarkably hybridize with the Sb and Te p electrons, leading to an improved electrical conductivity of BST films. Furthermore, W doping significantly reduces the work function of BST films, thereby improving the carrier mobility. A TEG module fabricated from four layers of W-BST thin films achieved a maximum output power density of 6.91 mW cm-2 at a temperature difference of 60 K. Application tests showed that the flexible TEG module could power a portable clock using the temperature difference between body temperature and room temperature. At a medium temperature of 439 K, the assembled TEG module can provide a stable output voltage of 1.51 V to power a LED. This study demonstrates the feasibility of combining inorganic thermoelectric materials with flexible substrates to create high-performance flexible TEGs.

An electrical analogy model for performance evaluation of natural air-cooled TEG modules considering nonlinear effect of heat convection

With the outstanding merits of the simple principle and low computational cost, the electrical analogy model of thermoelectric generator (TEG) modules plays an important role in evaluating the performance of thermoelectric energy harvesting systems. However, owing to the simplification of the heat dissipation structure and difficulty in determining the heat dissipation parameters, it is difficult to accurately describe the nonlinear influence of thermal convection on the heat dissipation performance of the TEG module under natural air-cooled conditions, thereby reducing the estimation accuracy of the module temperature and output. A new nonlinear electrical analogy model to evaluate the performance of natural air-cooled TEG modules was proposed in this study. The proposed model more accurately describes the nonlinear influence of thermal convection on the thermal dynamic characteristics of the TEG module by introducing a heat transfer branch between the cold and hot side surfaces of the TEG module and the environment. A parameter extraction method based on multi-objective optimization and the non-dominated sorting genetic algorithm II (NSGA-II) was proposed to overcome the problem of the heat dissipation parameters of natural air-cooled TEG modules. The experimental results show that under natural convection conditions, the maximum estimation errors of the temperature and output voltage evaluated by the proposed model and parameter identification method are less than 6.18 % and 9.14 %, respectively. Under forced convection, the maximum estimation errors of the temperature and output voltage were less than 7.36 % and 8.71 %, respectively. The above estimation errors are significantly lower than the traditional model.

Hybridization of heat recovery from exhaust gas of boilers using thermoelectric generators

This study investigates the possibilities for energy recovery and environmental effect reduction of waste heat, a consequence of industrial activities. The main objective of the work is to integrate thermoelectric generators (TEGs) into industrial hybrid waste heat recovery system. The study consists of combining TEGs modules with a boiler waste heat recovery system with Rockwool insulation, taking into consideration variables like thermal resistance, power output, water temperature, and energy conversion efficiency. The results show that TEG placement has a major impact on system performance. One of the promising configuration is TEGs placed close to heat source, especially outside exhaust pipe outer walls, where electrical power up to 27 W can be generated and heat of 4215 W can be recovered from the exhaust gas.

Experimental and computational thermoelectric generator for waste heat recovery for aeronautic application

This study is a comprehensive exploration of a polymer nanocomposite-based Thermoelectric Generator (TEG) developed within the European project InComEss, specifically designed for aeronautical applications. The focus lies on evaluating the TEG's performance under thermal conditions representative of various aircraft flight stages. The TEG module, consisting of four sections with 17 p-n strips each, is constructed from aerospace-grade polycarbonate, exhibiting dimensions of 50 * 1 * 0.3 mm. In the laboratory phase, the TEG's performance is systematically assessed through a series of experiments. Temperature gradients, ranging from −15 °C to 55 °C, emulate conditions experienced during ascending and descending flight stages. The results indicate promising outcomes, showcasing the potential viability of polymer-based TEGs for aeronautical applications. Specifically, temperature gradients of 40–70 °C, representative of atmospheric conditions and wing leading edge skin conditions, are applied across four test trials. The model validation demonstrates creditable agreement between computational outcomes and experimental data. Insights gained from COMSOL Multiphysics simulations includes temperature distribution, electric potential, and flow dynamics. Simulations conducted under varied temperature ranges provide valuable insights into the TEG's performance variability. Key findings include temperature distribution profiles, electric potential outputs under open and closed-circuit conditions, and a detailed flow analysis within a controlled thermal environment. The validated computational model not only enhances understanding of the TEG's behaviour, but also establishes a foundation for optimizing design parameters to enhance thermoelectric efficiency. The error analysis underscores the model's reliability, exhibiting an average error of 5.68 % between computational and experimental results, reinforcing its suitability for scientific investigations of this nature.

Liquid metal-enhanced thermoelectric generator for high-temperature thermal harvesting

It is a challenge to achieve high output power of the thermoelectric generator (TEG) for high-temperature waste heat recovery due to the working fluids with low thermal conductivity (such as air) or low tolerance of temperature (water or oil). In this paper, the gallium-based liquid metal (LM) with a high boiling point (>1000 ℃) and thermal conductivity (>20 W/mK) are introduced to significantly enhance heat charging and discharging at the hot/cold sides of TEG. We also developed an electromagnetic induction pumping method for the effective LM-driven flow at high temperatures. A three-dimensional coupling multi-parameter optimization simulation model of LM-based TEG was developed to reveal the internal heat transfer and power generation mechanism for clarifying the impact factors of the performance. The results have shown that the power generation capacity can be effectively improved by increasing the inlet temperature (Thot-in). It is worth noting that the temperature difference (ΔT) of the TEG module is severely limited by the thermal resistance (Rcapacity) of the LM heat capacity, such as, when the flow rate of 2 L/min, the Rcapacity accounts for 90.6 % (0.020 ℃/W). It is easier to achieve a larger open circuit voltage by increasing the height of the thermoelectric leg, but the Pmax is constantly weakened. Compared with Xceltherm 600 and Solar salt, LM heat transfer fluid has more obvious advantages in enhancing the power generation performance of the system. The LM-based TEG experiment platform was established to study heat transfer and power generation characteristics. The results have demonstrated that good consistency was proved by comparing experimental and numerical data. And the Pmax of the LM-based TEG system is 0.16 W/cm2 at ΔT of 136 ℃. LM-based TEG can open new perspectives for broad applications in high-temperature waste heat recovery.

Thermoelectric Energy Harvesting from the Roof and Attics of a Building

Globally people are faced with difficulties in environmental pollution, increasing power costs, and global warming. As such researchers are focusing on enhancing energy-harvesting using thermoelectric generators for power generation to lessen the difficulties. Through the Seebeck effect, thermoelectric generators (TEGs) have proven their ability to convert thermal energy into electric power. Given the unique benefits they present, thermoelectric generators have arisen in the recent decade as a possible alternative to other green power generation technologies. A thermoelectric generator (TEG) is a solid-state device that converts thermal energy into electrical energy. TEG consists of elements of p and n-type semiconductors, connected thermally in parallel and electrically in series. In this paper, one hundred and ninety-two thermoelectric generators connected in series and parallel were used to investigate the thermal energy potential at the roof and attic area for domestic application for 20 days from the falling solar radiation on a residential prototype in Bashar, Wase Local government area of Plateau State. A theoretical analysis was used in determining the average output power (P) due to the delta T across the thermoelectric generator module junction. The load resistance value of the thermoelectric generator configuration was evaluated. The results show that the TEG generated power output ranging from 217 mW to 1.99 W throughout the day, 5.97 mW to 13.8 mW in the morning, and 6.8 mW to 36.9 mW in the evening. Furthermore, The finding also reveals that the attic side has the capacity to store thermal energy, which can be harnessed owing to the fast heat transfer to the surroundings during the convection process. In conclusion, solar irradiance has a major impact on the system.

Principal parameters of thermoelectric generator module design for effective industrial waste heat recovery

In the sustainable energy agenda, thermoelectric generators (TEG) can be a central technology for low-cost combined heat and power (CHP) systems. TEG module (TEM) is the combination of TEG cells, heat pipes, heat sinks and copper blocks that produce electrical power and thermal energy for low temperature heating simultaneously. Two TEG cells were used in each TEM for CHP in a bakery factory with a reference waste heat temperature of 250°C. Different designs of TEM affect the heat transfer mechanics through the components. However, actual testing of each design requires high cost and time consuming. Identifying the principal parameters affecting the desired output is indeed important before investing in actual design fabrication. One-dimensional model is developed in this manuscript to evaluate the fundamental interactions between each component. Parametric variation for nine main parameters characterized the steady-state response of each parameter under four novel heat sink configurations. The parameter sweeps approach benefits in designing a novel TEM for optimum system output. An improved TEM with 6 TEG cells was designed and it increased the heat recovery ratio from an initial 14% to 38%. The Reynolds number of streams are the major operating parameter as it influences the heat sink effectiveness. Large heat exchanger frontal area and copper block housing surface area are also significant parameters. Identification of these principle parameters would assist in effective designs of TEM systems for industrial CHP.

Boosting diesel generators power with thermoelectric generators and integrated oil tank – Thermal modeling and parametric study

In this paper, a unique method for using thermoelectric generators (TEGs) to generate electricity is introduced, a technique that makes use of a cold oil tank and hot exhaust gases from generators. A set of TEGs and an integrated cold oil tank are connected to the diesel generator as part of the suggested design. A pertinent thermal modeling was designed and a thorough parametric study was carried out to show the validity of this innovative concept. The parametric study has demonstrated that when the generator power and the thickness to thermal conductivity ratio of each TEG in the system are increased, the temperature differential in each TEG module and the power produced by the assembly of TEGs both exhibit linear increases. The length of the TEG plate and the height of the exhaust gas duct cause an exponential increase in the temperature differential across each TEG module. The TEG assembly's power output increases linearly with TEG surface length and decreases exponentially with exhaust gas duct height. Using an exhaust gas duct height of 0.05 m, and a TEGs plate length of 1 m, the parametric study showed that power generation of up to 2778 W is feasible under the predetermined circumstances of a diesel generator with an output of 125 kW. When compared to a conventional setup, the new hybrid generator in this scenario may be able to increase power generation by up to 2.22 %.

Deficiency-induced absence of topological insulator behavior in antiperovskite Dirac metal oxide Sr3-x SnO: a DFT study

This study focuses on Sr3SnO (SSO), an antiperovskite Dirac metal-oxide (ADMO), that exhibits improved and enhanced physical properties when decreasing the number of Strontium (Sr) atoms in the crystal structure Sr3-xSnO. Stability and electronic properties calculations were performed using the density functional theory (DFT). Furthermore, transport and thermoelectric properties were determined by solving the Boltzmann transport equation implemented in BoltzTraP code. We report a topological insulator behavior when applying spin–orbit coupling (SOC) to pristine SSO. This behavior became absent when Sr concentration decreased. Moreover, when increasing oxygen concentration (Sr3SnO2), we reveal an improvement in the system’s stability. Electrical conductivity enhanced, for both Sr deficient SSO and for oxygen excess, reaching a value of 1.8×10201/Ω.m.s for x = 1. In addition, we show that Sr3-xSnO possesses both p-type and n-type nature, depending on the value of Sr deficiency concentration x, which makes this compound a suitable candidate for a thermoelectric generator (TEG) module.

High figure-of-merit of single-walled carbon nanotubes films with metallic type conduction

Carbon nanotubes are promising candidates for thermoelectric power generation because of their one-dimensionality mediated high Seebeck coefficient, high electrical conductivity with added advantages of flexibility, light weight, and scalability. We report the temperature-dependent thermoelectric properties of single-walled carbon nanotube (SWCNTs) films. The SWCNTs films exhibit p-type metallic conduction with high Seebeck coefficient (∼69.5 μVK−1) and moderate electrical conductivity (∼76 Scm−1). The films exhibit low thermal conductivity (∼0.1 Wm−1 K−1) due to phonon scattering at the interjunction region. The synergetic combination of thermoelectric properties resulted in a high figure-of-merit of ∼0.11 at 305 K. A flexible thermoelectric generator based on SWCNTs films mounted on a curved hot surface exhibited an output of 17 mV and 54 μA under a small temperature gradient of 10 K. The present work provides possible avenues for developing wearable SWCNTs based thermoelectric power generation modules for harvesting body heat.

Hundred-Watt Implantable TEG Module for Large-Scale Exhaust Gas Waste Heat Recovery

In this study, we have designed and developed an implantable thermoelectric generator (TEG) module tailored for large-scale flue gas waste heat recovery. We also have established a test stand to simulate diverse operational conditions, and systematically examined the influence of different operating conditions, including flue gas temperature, flue gas velocity, and cooling water temperature, on the electrical performance of the TEG module. When the flue gas temperature is 139 °C, the flue gas flow rate is 3.4 m/s, and the cooling water temperature is 20 °C, the TEG module operates at its peak performance. It achieves an open-circuit voltage of 856.3 V and an output power of 150.58 W. Furthermore, the TEG module demonstrates a notable power generation capacity of 3.86 kW/m3 and a waste heat recovery capacity of 135.85 kW/m3. The results prove the TEG module as an effective solution for large-scale flue gas waste heat recovery in industrial settings, contributing to sustainable energy practices. This study supports the application of thermoelectric power generation in the industrial sector, offering significant potential for advancements in energy efficiency.

Efficiency Enhancement in Photovoltaic–Thermoelectric Hybrid Systems through Cooling Strategies

The integration of photovoltaic (PV) and thermoelectric (TE) modules in PV-TE systems has shown potential for expanding the utilization of the solar spectrum, enhancing the total power output, and reducing the space that is required for PV power plants. This paper discusses the characteristics of a practical PV-TE system model. Typically, to boost the power output of the TE component, a significant temperature difference is induced across the thermoelectric generator (TEG) module using various heat removal methods. These cooling techniques not only enhance the TEG module’s efficiency but may also improve the performance of the PV component. In this study, we evaluate the efficiencies of PV-TE systems that are equipped with polycrystalline silicon solar cells and seven distinct TEGs under four different conditions. Initially, the PV-TE hybrid systems are tested without a cooling mechanism at an ambient temperature of 25 °C (Standard Test Conditions EN/IEC 61215). Subsequently, we examine the systems with a passive cooling approach, employing aluminum heat sinks to facilitate improved heat dissipation. Further tests involve an active cooling system using water and then nanofluid as coolants. The results from these assessments aim to establish a benchmark for enhancing the efficiency of future PV-TE systems.

Dual response multi-function smart window: An integrated system of thermochromic hydrogel and thermoelectric power generation module for simultaneous temperature regulation and power generation

Thermochromic smart windows have the capability to intelligently adjust color and light transmission based on ambient temperature and light levels, attracting considerable attention due to their potential to enhance building energy efficiency and residential comfort. However, excessive sunlight exposure can lead to increased heat generation, potentially affecting the service life of the window. In this work, we present the development of an efficient intelligent solar thermal utilization window, incorporating heat collection, temperature regulation, and power generation functionalities. The smart window achieves light modulation by adjusting the glycerol content in the thermochromic hydrogel. In addition, the thermoelectric material is arranged in series and parallel to the smart window functioning as the power generation module. The developed smart window shows excellent sunlight modulation capability (91.2 % visible light transmittance and 99.2 % sunlight shielding rate). Meanwhile, the response temperature of the window can be adjusted from 34.5 °C to 29 °C. The thermoelectric hydrogel can generate continuous and stable current (∼75 µA) with a temperature difference of 40 ℃. The practical application proves that the generated power by the temperature difference can fully meet the switching needs of small electrical appliances. This transformation framework between photothermal-electricity conversion deserves attention in the design of future smart windows.

Development of thermoelectric exhaust energy recovery system of a hydrogen internal combustion engine in a city bus using a Three-Dimensional multiphysics model

In this study, individual thermoelectric generator (TEG) module was developed and validated through comprehensive analyses and experiments. A model of the TEG module was constructed and subsequently verified through a coherent alignment with experimental results, ensuring its viability and accuracy within the application of interest. A thermoelectric exhaust energy recovery (TEER) system designed with a robust rectangular structure was also developed for an urban mass transit bus, which operates using a hydrogen internal combustion engine. By accommodating 40 TEG modules, each complemented with cooling fins, and placing cooling channels at the top and bottom of the exhaust channel, it was demonstrated that a proportionality between the power output and load resistance of the TEER system through a dimensionless analysis. The system’s three-dimensional multiphysics model constructed concurrently with the actual system facilitated both optimization and validation, predicting an energy recovery of 1.0–1.1% from the hydrogen engine exhaust and an optimal load resistance of 3.2 Ω under various operating conditions.

A novel geothermal source integrated system to meet the building demands: Exergo-economic and optimization assessment

This study proposes a novel geothermal source integrated system to meet the building demands that combines a solid oxide fuel cell (SOFC), a geothermal source, and a thermoelectric generator (TEG) to achieve enhanced performance. The system is subjected to exergo-economic examination and optimization to determine its thermal performance and cost-effectiveness. Integrating geothermal energy with SOFC can help reduce waste heat and improve overall system performance. Based on the results, it is determined that the cooling system can generate 161.3 kW for building purposes, and the integrated turbine in the cooling system can also produce 891.9 kW of electrical output. The integrated thermoelectric generator modules produce 418.06 kW. Moreover, hybrid systems' energy and exergy efficiencies are 23.29 % and 19.26 %. The case study of the introduced system indicates that by variation of parameters, the systems have different behaviors from thermodynamic and cost points of view. Therefore, multi-criteria optimum finding according to the genetic algorithm is conducted. The optimization results present that in the selected optimal state while using the ideal state, the net output power and overall cost rate are 193307.12 kW and 77.96 $/h.

Waste heat regeneration from thermoelectric generator based improved biomass cookstove (TIBC): Modelling of TEG system utilizing DC-DC converter with fuzzy logic MPPT

Most of the people in the rural areas cook their food in traditional biomass cookstove which emits a lot of emission that leads to poor health of the women and children. This paper points out a technology that utilises a thermoelectric generator (TEG), which converts thermal energy into electrical energy directly. A TEG is a small plate made of semiconductor p-n junctions connected electrically in series and thermally in parallel. The difference in temperature produced on the hot side and cold side of the TEG is proportional to the voltage generated. The TEG is integrated into the wall of the inner combustion chamber of the biomass cookstove with the help of heat plate and the cold side of the TEG is connected to a flower-type heat sink to maintain the temperature difference. The power generated by the TEG is used to drive a 12 V DC fan which helps to keep the cold side of the TEG relatively cooler and direct the same air inside the inner combustion chamber of the cook stove through holes to increase the air-to-fuel ratio. As a result, it improves the cookstove's combustion, thereby reducing emissions and increasing thermal efficiency. For testing the efficiency of the TEGs available in the market, a hit and trial method is used by taking TEGs of different specifications and connecting them to a hot side and a cold side test bed and then finally the performance is realized. Therefore, for every different TEG, a hardware has to be made for final conclusion of the result. To eliminate the hit and trial method, the electrical characteristics of thermoelectric generator module has been analysed by modeling a TEG module in MATLAB/Simulink and implementing it with fuzzy logic control (FLC) based MPPT utilizing a DC-DC boost converter with a constant as well as variable load. This fuzzy logic-based scheme exhibits fast dynamic response and precisely tracks the maximum power point (MPP) from TEG under varying load conditions. Based on the robust performance of the obtained simulation results, the TEG module is integrated and tested in the laboratory using a thermoelectric generator based improved biomass cookstove (TIBC). The novelty lies on the concept of using MATLAB/Simulink platform by modeling the FLC based MPPT incorporating boost converter to test the performance of TEG module for its integration with TIBC and eliminating traditional hit and trial method. This TIBC is able to power the fan directly within just 2–3 min using the electricity generated by the TEG module. The maximum power generated from the TIBC is 6.25 W using a single TEG. The fan requires 1.4 W and rest of the power was used to charge auxiliary battery.

Experimental study of the influences of surface roughness and thermal interface material on the performance of a thermoelectric generator

Reducing surface roughness and using thermal interface materials (TIMs) at the interfaces between a thermoelectric generator (TEG), heat source, and heat sink are effective strategies for decreasing the thermal contact resistance (TCR) and enhancing the TEG performance. To evaluate the influences of parameters such as the surface roughness, the thermal conductivity of TIM and loading pressure, we conducted experiments to measure the open-circuit voltage and output power of the TEG under various installation conditions. We also analysed the changes in TCR and temperature difference across the TEG module. The experimental findings were validated with numerical simulations using COMSOL Multiphysics under specific conditions. Our results revealed that reducing surface roughness and using TIM could substantially reduce the TCR, increase the temperature difference across the TEG, and increase the output power from the TEG. In our experiments, we used a temperature controller, cartridge heaters and thermocouples to regulate and record the temperatures of the heat source and heat sink. When maintaining a temperature difference of 53 K between the heat source and heat sink, and loading pressure set at 0.2 MPa, without using TIM, as the surface roughness decreased from 2.2 μm to 0.37 μm and to 0.03 μm, leading to a reduction in the TCR from 0.22 K W−1 to 0.17 K W−1 and to 0.13 K/W. Simultaneously, the open-circuit voltage increased from 1.32 V to 1.65 V and to 1.86 V, and the maximum output power increased from 0.26 W to 0.44 W and to 0.58 W. Additionally, when the surface roughness was 0.37 μm, after using TIM with thermal conductivity of 1 W/m-K, 2 W m−1-K−1, and 5 W m−1-K−1, the open-circuit voltage reached 1.44 V, 1.74 V and 1.94 V, respectively, and the maximum power reached 0.31 W, 0.51 W and 0.65 W, respectively.

РАЗРАБОТКА АВТОНОМНОГО ИСТОЧНИКА ЭЛЕКТРОПИТАНИЯ С ПРИМЕНЕНИЕМ ВИХРЕВОГО ЭФФЕКТА РАНКА-ХИЛША

The relevance of the research is to develop an autonomous power source based on a closed organic Rankine cycle with the simultaneous use of the Ranque-Hilsch vortex effect, which can be used for the efficient generation of electrical energy at mining, transportation, preparation and processing facilities various gases, including at industrial sites located in hard-to-reach areas, significantly removed from the centralized power supply, as well as in areas with harsh climatic conditions. The article discusses the main positive characteristics and disadvantages of existing autonomous power plants used in this industry, as well as the design and operating principle of the developed autonomous power supply, the use of which will significantly reduce environmental pollution due to the lack of use of combustion products in the technological cycle, thereby increasing the environmental friendliness of the process of generating electrical energy, minimizing the economic costs of fuel and maintenance, as well as increasing the fire and explosion safety of the mentioned objects, a design option for an autonomous power supply, including a thermoelectric generator module, has also been considered.