Thermally Activated Delayed Fluorescence Materials Research Articles

Design of Thermally Activated Delayed Fluorescence Materials: Transition from Carbonyl to Amide-Based Acceptors.

Benzophenone skeletons containing a carbonyl unit (O=C) have been widely used as electron acceptors in the thermally activated delayed fluorescence (TADF) materials. Herein, we present a novel molecular design concept for TADF materials by transitioning from a carbonyl to an amide (O=C-N) skeleton as the acceptor. The amide unit, compared to its carbonyl counterpart, offers a more stable electronic configuration. Leveraging this insight, we have developed a series of high-performance TADF molecules based on benzoyl carbazole and carbazoline acceptors. These molecules exhibit exceptionally small singlet-triplet energy gaps and pronounced aggregation-enhanced emission properties, achieving photoluminescence quantum yields in neat films as high as 99%. Consequently, these materials serve as efficient emitters in non-doped organic light-eimtting diodes (OLEDs), reaching a maximum quantum efficiency (EQEmax) of up to 26.0%, significantly higher than the 17.0% obtained with benzophenone acceptor-based TADF molecules. Additionally, they have been used as TADF hosts in narrowband red fluorescent OLEDs, setting a record-high EQEmax of 22.4%.

Multireference Ab Initio Calculations on Excited Electronic States of Carbazole-Based Organic Compounds for Thermally Activated Delayed Fluorescence.

The emerging technology of organic light-emitting diodes takes advantage of the thermally activated delayed fluorescence (TADF) mechanism for improved efficiency. Carbazole-based organic molecules are suitable for TADF emission because of charge transfer excitations between the electron-donor carbazole and an electron-acceptor unit. Computational design of new TADF molecules with the desired properties is challenging because charge-transfer excitations cannot be predicted accurately by time-dependent density functional theory. Four groups of carbazole-based donor-acceptor molecules have been studied using multireference ab initio methods to understand the nature of excited electronic states. The state-averaged complete active space self-consistent field (SA-CASSCF) and the N-electron valence state perturbation theory (NEVPT2) were used to calculate energies and oscillator strengths for multiple excited electronic states. The number of active electrons and orbitals and the number of excited states included in state-averaged CASSCF were selected such that the accuracy of ab initio predictions could be improved systematically. The procedure introduced here for the calculation of multiple excited electronic states of TADF candidates can be used to accelerate the computational search for efficient TADF materials.

Excited-State Engineering Enables Efficient Deep-Blue Light-Emitting Diodes Exhibiting BT.2020 Color Gamut.

Organic luminescent materials that exhibit thermally activated delayed fluorescence (TADF) can convert non-emissive triplet excitons into emissive singlet states through a reverse intersystem crossing (RISC) process. Therefore, they have tremendous potential for applications in organic light-emitting diodes (OLEDs). However, with the development of ultra-high definition 4K/8K display technologies, designing efficient deep-blue TADF materials to achieve the Commission Internationale de l'Éclairage (CIE) coordinates fulfilling BT.2020 remains a significant challenge. Here, an effective approach is proposed to design deep-blue TADF molecules based on hybrid long- and short-range charge-transfer by incorporation of multiple donor moieties into organoboron multiple resonance acceptors. The resulting TADF molecule exhibits deep-blue emission at 414nm with a full width at half maximum (FWHM) of 29nm, together with a thousand-fold increase in RISC rate. OLEDs based on the champion material achieve a record maximum external quantum efficiency (EQE) of 22.8% with CIE coordinates of (0.163, 0.046), approaching the coordinates of the BT.2020 blue standard. Moreover, TADF-assisted fluorescence devices employing the designed material as a sensitizer exhibit an exceptional EQE of 33.1%. This work thus provides a blueprint for future development of efficient deep-blue TADF emitters, representing an important milestone towards meeting the blue color gamut standard of BT.2020.

Investigating Hydrogen Bonding in Quinoxaline-Based Thermally Activated Delayed Fluorescent Materials.

In recent years, hydrogen bonding (H bonding) as an intramolecular locking strategy has been proposed to enhance photoluminescence, color purity, and photostability in thermally activated delayed fluorescence (TADF) materials. Rigidification as a design strategy is particularly relevant when using electron-deficient N-heterocycles as electron acceptors, because these materials often suffer from poor performance as orange to near-infrared emitters as a result of the energy gap law. To critically evaluate the presence of H bonding in such materials, two TADF-active donor-acceptor dyads, ACR-DQ and ACR-PQ, were synthesized. Despite their potential sites for intramolecular H bonding and emissions spanning yellow to deep red, computational analyses (including frequency, natural bond orbital, non-covalent interaction, and potential energy surface assessments) and crystal structure examinations collectively suggest the absence of H bonding in these materials. Our results indicate that invoking intramolecular H bonding should be done with caution in the design of rigidified TADF materials.

Aggregation Enhanced Thermally Activated Delayed Fluorescence through Spin‐Orbit Coupling Regulation

Integrating aggregation‐induced emission (AIE) into thermally activated delayed fluorescence (TADF) emitters holds great promise for the advancement of highly efficient organic light emitting diodes (OLEDs). Despite recent advancements, a thorough comprehension of the underlying mechanisms remains imperative for the practical application of such materials. In this work, we introduce a novel approach aimed at modulating the TADF process by manipulating dynamic processes in excited states through aggregation effect. Our findings reveal that aggregation not only enhances both prompt and delayed fluorescence simultaneously but also imposes constraints on molecular reorientation. This constraint reinforces spin‐orbit coupling and reduces the energy gap between singlets and triplets. These insights deepen our understanding of the fundamental mechanisms governing the aggregation effect on TADF materials and provide valuable guidance for the design of high‐efficiency photoluminescent materials.

Aggregation Enhanced Thermally Activated Delayed Fluorescence through Spin-Orbit Coupling Regulation.

Integrating aggregation-induced emission (AIE) into thermally activated delayed fluorescence (TADF) emitters holds great promise for the advancement of highly efficient organic light emitting diodes (OLEDs). Despite recent advancements, a thorough comprehension of the underlying mechanisms remains imperative for the practical application of such materials. In this work, we introduce a novel approach aimed at modulating the TADF process by manipulating dynamic processes in excited states through aggregation effect. Our findings reveal that aggregation not only enhances both prompt and delayed fluorescence simultaneously but also imposes constraints on molecular reorientation. This constraint reinforces spin-orbit coupling and reduces the energy gap between singlets and triplets. These insights deepen our understanding of the fundamental mechanisms governing the aggregation effect on TADF materials and provide valuable guidance for the design of high-efficiency photoluminescent materials.

Multifunctional Deep-Blue Thermally Activated Delayed Fluorescence Based on an Oxygen-Bridged Boron Acceptor for Highly Efficient Organic Light-Emitting Diodes.

Until now, thermally activated delayed fluorescence (TADF) materials based on bridged boron-based acceptors have been primarily developed as dopants. However, in this study, we synthesized and characterized multifunctional deep-blue TADF materials─t-OBO-DMAC and t-OBO-DPAC─using bridged boron-based acceptors in combination with dimethylacridine or diphenylacridine as donors. These materials serve as both dopants and hosts. Theoretical calculations and experimentally measured photophysical properties of t-OBO-DMAC reveal a smaller singlet-triplet energy difference, higher photoluminescence quantum yield, and more efficient reverse intersystem crossing compared to t-OBO-DPAC. When evaluated as TADF emitters, t-OBO-DMAC and t-OBO-DPAC exhibited maximum external quantum efficiency (EQE) of 14.4 and 7.3% with deep-blue color coordinates of (0.14, 0.11) and (0.15, 0.07), respectively. Both materials were further assessed as hosts in various configurations, including host-only, TADF, phosphorescent, and phosphor-sensitized fluorescence (PSF)-emitting systems. Notably, t-OBO-DMAC demonstrated a high maximum EQE of 13.9% with deep-blue color coordinates of (0.15, 0.07) in a nondoped host-only device. Remarkably, both materials achieved EQEs exceeding 20% in the PSF devices. Our study marks a critical advancement in the field that breaks the conventional boundaries of the dopant and host and demonstrates unprecedented multifunctionalities for advanced organic light-emitting diodes.

Two-Coordinate Thermally Activated Delayed Fluorescence Coinage Metal Complexes: Molecular Design, Photophysical Characters, and Device Application.

Since the emergence of the first green light emission from a fluorescent thin-film organic light emitting diode (OLED) in the mid-1980s, a global consumer market for OLED displays has flourished over the past few decades. This growth can primarily be attributed to the development of noble metal phosphorescent emitters that facilitated remarkable gains in electrical conversion efficiency, a broadened color gamut, and vibrant image quality for OLED displays. Despite these achievements, the limited abundance of noble metals in the Earth's crust has spurred ongoing efforts to discover cost-effective electroluminescent materials. One particularly promising avenue is the exploration of thermally activated delayed fluorescence (TADF), a mechanism with the potential to fully harness excitons in OLEDs. Recently, investigations have unveiled TADF in a series of two-coordinate coinage metal (Cu, Ag, and Au) complexes. These organometallic TADF materials exhibit distinctive behavior in comparison to their organic counterparts. They offer benefits such as tunable emissive colors, short TADF emission lifetimes, high luminescent quantum yields, and reasonable stability. Impressively, both vacuum-deposited and solution-processed OLEDs incorporating these materials have achieved outstanding performance. This review encompasses various facets on two-coordinate TADF coinage metal complexes, including molecular design, photophysical characterizations, elucidation of structure-property relationships, and OLED applications.

A figure of merit for efficiency roll-off in TADF-based organic LEDs

Organic light-emitting diodes (OLEDs) are a revolutionary light-emitting display technology that has been successfully commercialized in mobile phones and televisions1,2. The injected charges form both singlet and triplet excitons, and for high efficiency it is important to enable triplets as well as singlets to emit light. At present, materials that harvest triplets by thermally activated delayed fluorescence (TADF) are a very active field of research as an alternative to phosphorescent emitters that usually use heavy metal atoms3,4. Although excellent progress has been made, in most TADF OLEDs there is a severe decrease of efficiency as the drive current is increased, known as efficiency roll-off. So far, much of the literature suggests that efficiency roll-off should be reduced by minimizing the energy difference between singlet and triplet excited states (ΔEST) to maximize the rate of conversion of triplets to singlets by means of reverse intersystem crossing (kRISC)5–20. We analyse the efficiency roll-off in a wide range of TADF OLEDs and find that neither of these parameters fully accounts for the reported efficiency roll-off. By considering the dynamic equilibrium between singlets and triplets in TADF materials, we propose a figure of merit for materials design to reduce efficiency roll-off and discuss its correlation with reported data of TADF OLEDs. Our new figure of merit will guide the design and development of TADF materials that can reduce efficiency roll-off. It will help improve the efficiency of TADF OLEDs at realistic display operating conditions and expand the use of TADF materials to applications that require high brightness, such as lighting, augmented reality and lasing.

Ultrafast spin-flip exciton conversion and narrowband sky-blue luminescence in a fused polycyclic selenaborin emitter.

Thermally activated delayed fluorescence (TADF) materials with high photoluminescence quantum yields and fast reverse intersystem crossing (RISC) capabilities are highly desirable for applications in high-efficiency organic light-emitting diodes. Herein, we report the synthesis as well as structural and photophysical properties of 5,9-diselena-13b-boranaphtho[3,2,1-de]anthracene (SeBSe) as a narrowband-emissive TADF material. The incorporation of two selenium atoms into the boron-fused pentacyclic π-core results in a small singlet-triplet energy gap (ΔE ST) and thereby significant TADF properties. Moreover, theoretical calculations revealed a noticeable spin-orbit coupling enhancement between the singlet and triplet manifolds in SeBSe by virtue of the heavy-atom effect of selenium atoms. Consequently, SeBSe allows ultrafast spin-flip RISC with the rate constant surpassing 108 s-1, which far exceeds the corresponding fluorescence radiative decay rate (∼106 s-1), enabling an ideal singlet-triplet superimposed excited state.

Extended Conjugation Strategy Enabling Red-Shifted and Efficient Emission of Orange-Red Thermally Activated Delayed Fluorescence Materials.

In account of the energy gap law, the development of efficient narrow-band gap thermally activated delayed fluorescence (TADF) materials remains a major challenge for the application of organic light-emitting diodes (OLEDs). The orange-red TADF materials are commonly designed with either large π-conjugated systems or strong intramolecular donor-acceptor (D-A) interactions for red-shift emission and small singlet-triplet energy gap (ΔEST). There are rare reports on the simultaneous incorporation of these two strategies on the same material systems. Herein, two orange-red emitters named 1P2D-BP and 2P2D-DQ have been designed by extending the conjugation degree of the center acceptor DQ and increasing the number distribution of the peripheral donor PXZ units, respectively. The emission peak of 1P2D-BP is red-shifted to 615 nm compared to 580 nm for 2P2D-DQ, revealing the pronounced effect of the conjugation extension on the emission band gap. In addition, the distorted molecular structure yields a small ΔEST of 0.02 eV, favoring the acquisition of a high exciton utilization through an efficient reverse intersystem crossing process. As a result, orange-red OLEDs with both 1P2D-BP and 2P2D-DQ have achieved an external quantum efficiency (EQE) of more than 17%. In addition, the efficient white OLED based on 1P2D-BP is realized through precise exciton assignment and energy transport modulation, showing an EQE of 23.6% and a color rendering index of 82. The present work provides an important reference for the design of high-efficiency narrow-band gap materials in the field of solid-state lighting.

Regulating Triplet Excitons of Organic Luminophores for Promoted Bioimaging.

Afterglow materials with organic room temperature phosphorescence (RTP) or thermally activated delayed fluorescence (TADF) exhibit significant potential in biological imaging due to their long lifetime. By utilizing time-resolved technology, interference from biological tissue fluorescence can be mitigated, enabling high signal-- to-background ratio imaging. Despite the continued emergence of individual reports on RTP or TADF in recent years, comprehensive reviews addressing these two materials are rare. Therefore, this review aims to provide a comprehensive overview of several typical molecular designs for organic RTP and TADF materials. It also explores the primary methods through which triplet excitons resist quenching by water and oxygen. Furthermore, we analyze the principal challenges faced by afterglow materials and discuss key directions for future research with the hope of inspiring developments in afterglow imaging.

Diradical-Based Strategy in Designing Narrowband Thermally Activated Delayed Fluorescence Molecules with Tunable Emission Wavelengths.

In the design of thermally activated delayed fluorescence (TADF) materials, narrow-band emission is of particular importance for the development of organic light-emitting diodes (OLEDs). In this work, we proposed a new strategy for designing TADF molecules utilizing degenerate nonbonding (NB) orbitals of diradical parent molecules, and these designed molecules are termed NB-TADF molecules. Based on this strategy, a series of NB-TADF molecules is finely designed and systematically studied by theoretical calculations. Taking advantage of the nonbonding properties, these NB-TADF molecules exhibit desirable narrowband emissions and high quantum yields. More importantly, the emission bands can be easily tuned from blue to near-infrared by changing the conjugate length of the parent group in the NB-TADF molecules. We hope that this new strategy can open a new door for the design of novel TADF materials.

Thermally Activated Delayed Fluorescent Binuclear Copper(I) Alkynyl Complexes with Cuprophilic Interactions.

Copper(I)-based thermally activated delayed fluorescence (TADF) emitters have been conceived to be promising candidates for display and lighting applications because of their multifarious structures and strong photoluminescence. Herein a string of binuclear Cu(I) complexes bearing pronounced cuprophilic interactions have been designed and synthesized. [Cu2(dppb)2(μ2-η1-C≡C-Ph)2] (1 a) and [Cu2(dppb)2(μ2-η1-C≡C-PPXZ)2] (1 b) display photoluminescence quantum yields of up to 67 % in doped films and solid states via TADF and exhibit reversible bicolor luminescence switching upon mechanical stimuli. Computational studies manifest that the metal-to-ligand charge transfer predominant transitions ensure a small energy splitting (ΔEST) between the lowest singlet (S1) and triplet (T1) excited states and cuprophilic interactions promote the spin-orbit coupling (SOC), favoring the reverse intersystem crossing (RISC) process. This study provides a new strategy for the construction of stimuli-responsive metal-based TADF materials.

Exploring the Theoretical Foundations of Thermally Activated Delayed Fluorescence (TADF) Emission: A Comprehensive TD-DFT Study on Phenothiazine Systems.

This study conducts a thorough theoretical investigation of Thermally Activated Delayed Fluorescence (TADF) in phenothiazine-based systems, examining ten molecular configurations recognized experimentally as TADF-active. Employing Time-Dependent Density Functional Theory (TD-DFT), our analysis spans the investigation of singlet-triplet energy gaps (ΔEST), spin-orbit coupling, and excitation characteristics using Multiwfn. This approach not only validates the adherence to El Sayed's rule across these systems but also provides a detailed understanding of charge transfer dynamics, as visualized through heat maps. A significant aspect of our study is the exploration of different oxidation states of sulfur and site substitutions on phenothiazine. This systematic variation aims to identify additional TADF-active compounds, drawing parallels with properties characterizing other known TADF emitters. Our investigation into Reverse Intersystem Crossing (rISC) rates and the analysis of dihedral angles in relation to ΔEST values offer nuanced insights into the TADF behaviours of these molecules. By integrating rigorous computational analysis with practical implications, we provide a foundational understanding that enhances the design and optimization of phenothiazine-based materials for optoelectronic applications. This work not only advances our theoretical understanding of TADF in phenothiazine derivatives but also serves as a guide for experimentalists and industry professionals in the strategic design of new TADF materials.

Planar Chiral Thermally Activated Delayed Fluorescence Materials Based on Di[2.2]paracyclophane for Circularly Polarized Electroluminescence

AbstractIn this study, featuring di[2.2]paracyclophane (DpCp) amine derivatives as electron donors and 4‐(4,6‐diphenyl‐1,3,5‐triazin‐2‐yl)phenyl (Trz) as the electron acceptor, four thermally activated delayed fluorescence (TADF) molecules are disclosed. The C2 symmetric molecules, DpCpN‐Trz and DpCpCz‐Trz, bearing a chair‐like planar chiral di[2.2]paracyclophane moiety, are obtained as optically pure enantiomers (R/S)‐C‐DpCpN‐Trz and (R/S)‐C‐DpCpCz‐Trz. And the compounds B‐DpCpN‐Trz and B‐DpCpCz‐Trz with a bridge‐like di[2.2]paracyclophane skeleton are meso‐compounds, thus without optically activity. All emitters show blue emissions peaking from 464 to 485 nm, accompanied by high photoluminescence quantum efficiency (up to 93%). The enantiomers (R/S)‐C‐DpCpN‐Trz and (R/S)‐C‐DpCpCz‐Trz exhibit symmetric circularly polarized photoluminescence spectra with dissymmetry factors (|gPL|) ranging from 3.8 × 10−4 to 6.7 × 10−4 in toluene and films. The organic light‐emitting diodes (OLEDs) fabricated with these emitters achieve maximum external quantum efficiencies of up to 19.5%. Notably, the circularly polarized OLEDs (CP‐OLEDs) with (R/S)‐C‐DpCpN‐Trz and (R/S)‐C‐DpCpCz‐Trz demonstrate |gEL| factors of up to 7.6 × 10−4. This study demonstrates a feasible way to design TADF materials and enantiomers by incorporating DpCp derivatives for CP‐OLEDs.

Recent Progress in Phenoxazine-Based Thermally Activated Delayed Fluorescent Compounds and Their Full-Color Organic Light-Emitting Diodes.

Third-generation organic light-emitting diodes (OLEDs) based on metal-free thermally activated delayed fluorescent (TADF) materials have sparked tremendous interest in the last decade due to their nearly 100% exciton utilization efficiency, which can address the low-efficiency issue of the first-generation fluorescent emitters and the high-cost issue of the second-generation organometallic phosphorescent emitters. Construction of efficient and stable TADF-OLEDs requires utilizing TADF materials with a narrow singlet-triplet energy gap (ΔEST), high photoluminescence quantum yield (PLQY) and short TADF lifetime. A small ΔEST is necessary for an efficient reverse intersystem crossing (RISC) process, which can be achieved through theeffective spatial separation of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO). TADF emitters have been generally designed as intramolecular charge transfer (ICT) molecules with highly twisted donor-acceptor (D-A) molecular architectures. A wide variety of combinations of electron donors and acceptors have been explored. In this review, we shall focus on recent progress in organic TADF molecules incorporating strong electron-donor phenoxazine moiety and their application as emitting layer (EML) in OLEDs.

Chiral Sulfonyl Binaphthalene‐Based Thermally Activated Delayed Fluorescence Materials for Circularly Polarized Electroluminescence

AbstractChiral emitters capable of producing circularly polarized luminescence (CPL) with high dissymmetry factors (g) are crucial for circularly polarized organic light‐emitting diodes (CP‐OLEDs) and 3D display. Herein, sulfonyl binaphthalene is incorporated as both electron acceptor and chiral source into three pairs of thermally activated delayed fluorescence (TADF) enantiomers, (R/S)‐BPSTCZ, (R/S)‐BPSDMAC, and (R/S)‐BPSPXZ, for the first time, combining tert‐butylcarbazole, 9,9‐dimethyl‐9,10‐dihydro‐acridine and phenoxazine electron donors, respectively. These TADF compounds exhibit tunable emissions spanning from deep blue to green, accompanied by high photoluminescence quantum yields. Due to the large distorted angles caused by two sulfonyl units, all enantiomers exhibit pronounced CPL with |gPL| factors of up to 6.0 × 10−3 in doped films. The corresponding CP‐OLEDs display good performances with external quantum efficiencies of up to 28.5% and notable |gEL| factors of up to 8.8 × 10−3, surpassing most CP‐OLEDs based on chiral TADF materials.

Circularly Polarized Organic Light-Emitting Diodes Based on Chiral Hole Transport Enantiomers.

The circularly polarized organic light-emitting diodes (CP-OLEDs) demonstrate promising application in 3D display due to the direct generation of circularly polarized electroluminescence (CPEL). But the chiral luminescence materials face challenges as intricated synthetic route, enantiomeric separation, etc. Herein, fresh CP-OLEDs are designed based on chiral hole transport material instead of chiral emitters. A pair of hole transport enantiomers (R/S-NPACZ) exhibit intense dissymmetry factors (|gPL|) about 5.0 × 10-3. With R/S-NPACZ as hole transport layers, CP-OLEDs are fabricated employing six achiral phosphorescence and thermally activated delayed fluorescence (TADF) materials with different wavelengths, in consistence with the generated CPEL spectra. The CP-OLEDs based on achiral red, green, and blue iridium(III) complexes exhibit external quantum efficiencies (EQEs) of 14.9%, 30.7%, and 14.1% with |gEL| factors of 8.8 × 10-4, 2.3 × 10-3, and 2.0 × 10-3, respectively. Moreover, the devices using achiral blue, blueish-green, and green TADF materials display EQEs of 24.1%, 17.9%, and 25.4% with |gEL| factors of 1.0 × 10-3, 3.6 × 10-3, and 2.2 × 10-3, respectively. As far as known, it is the first example of CP-OLEDs based on chiral hole transport materials, which act as the organic circularly polarizers and have potential to generate CPEL from achiral luminescence materials.

Positional isomeric effect: A simple and feasible strategy for constructing efficient red TADF materials

In order to investigate the effect of positional isomerization on the photoelectric properties of thermally activated delayed fluorescence (TADF) emitters, thereby fully stimulating the potential of the molecular backbone, herein, two red TADF isomers, oTPA-PPP and mTPA-PPP, were developed and synthesized by linking triphenylamine (TPA) donor into different positions of the pyrido [2′,3′:5,6] pyrazino [2,3-f] [1,10] phenanthroline (PPP). Their photoluminescent quantum yields (PLQYs) and external quantum efficiencies (EQEs) were significantly different by manipulating the substitution position of the donor. Compared with mTPA-PPP, oTPA-PPP exhibited higher PLQY benefiting from intramolecular hydrogen bonding and larger fluorescence radiative decay rate, as confirmed by both theoretical and experimental analyses. As a result, oTPA-PPP-based organic light-emitting diode (OLED) realized high EQEmax of 19.2 % with red emission at 603 nm, whereas mTPA-PPP achieves an EQEmax of 7.9 % at 596 nm. This work provides a simple and feasible molecular design strategy to design and select red TADF emitters with excellent properties.