Thermal Process Research Articles

Combined membrane separation and photocatalysis process for the recovery and decomposition of micro/nanoplastics from polyester fabrics

The mismanagement of plastic waste has had a disastrous impact on the aquatic and terrestrial environment This study aims to develop and evaluate an innovative system for treating polyester-polluted water by combining membrane separation and photocatalytic processes. The research objective is to concentrate polyester fibers using membrane technologies and subsequently decompose them through a photocatalytic process using different oxidants, such as hydrogen peroxide and sodium peroxodisulfate.The results, compared in terms of permeate flux, water permeability, fouling index (FI %) and cleaning efficiency (CE %), indicated nanofiltration as the membrane process that allowed not only the complete recovery of fibers from water as with all processes used, but also the almost complete recovery of the initial performance of the membrane used (CA 2kDa NF) with a cleaning efficiency of 98% and a low fouling index (16%).Preliminary photocatalytic tests on some recovered polyester fibers by membrane process showed a decrease in their length and thickness with a weight loss of 13.52% in 48h, highlighting the potential of the photocatalytic process to degrade polyester fibers. Furthermore, these results indicated that the photocatalytic process can be tuned to allow the decomposition of polyester avoiding the use of dangerous and costly methods such as the thermal process that can produce toxic by-products. The proposed system, which combines the membrane separation process and the photocatalysis process, could lead to an effective integrated process for the treatment of MPs/NPs from polluted water.

Increased interlayer spacing N-doping Ti3C2Tx MXene-based mezzanine heterostructure for enhanced performance lithium/sodium storage

Structure of the electrode materials play a critical role in electrochemical performance for both lithium-ion batteries and sodium ion batteries. Herein, MXene modified by element doping and compositing metal–organic frameworks (MOF)-based Fe2O3@Carbon nanofibers (CNFs) with a mezzanine heterostructure, is constructed to achieve low interfacial impedance, high specific capacity stability in lithium/sodium storage processes. The prepared mezzanine heterostructure Fe2O3@C@N-Ti3C2Tx composite is highly conductive and mesoporous. During the nitrogen-doping thermal treatment process, the interlayer spacing of Ti3C2Tx MXene was increased, providing wider ion transport channels. Additionally, inert carbon atoms were transformed into electrochemically active nitrogen atoms, leading to the construction of more active centers and surface defects. The spatial confinement of N-Ti3C2Tx MXene during the electrochemical process, effectively mitigating volume expansion and maintaining structural stability upon applied as electrode materials. Benefitting from the unique 3D conductive network, the mezzanine heterostructure Fe2O3@C@N-Ti3C2Tx composite nanofibers exhibits excellent Li/Na storage performance. In LIBs, it delivers a capacity of 226 mAh/g at 10 A/g and retains 314 mAh/g after 2800 ultra-long cycles at 5 A/g. For SIBs, it exhibits a capacity of 135 mAh/g at 5 A/g and maintains 209 mAh/g after 3000 cycles at 2 A/g.

Thermal decomposition behavior of ZrO2 barrier layer against Cr/Zr inter-diffusion under high temperature

The Cr/Zr inter-diffusion has been becoming a critical issue for Cr-coated Zr alloys as accident tolerant fuel (ATF) cladding. Here, ZrO2 barrier layers against Cr/Zr inter-diffusion were successfully fabricated between the Cr layer and Zry4 substrate. Thermal decomposition of ZrO2 is confirmed under high temperatures, and ZrO2 is transformed into oxygen-stabilized α-Zr (O), which is effective for mitigating the Cr/Zr inter-diffusion. In-situ transmission electron microscopy (TEM) results indicate that the ZrO2 thermal decomposition process becomes more obvious under 500 ℃. In addition, Cr/α-Zr (O) inter-diffusion leads to the thin Zr(Cr, Fe)2 interface layer due to the high stability of the α-Zr (O) phase.

Reactions of citrinin with amino compounds modelling thermal food processing

AbstractCitrinin (CIT) is a nephrotoxic mycotoxin, produced by several species of Penicillium, Aspergillus, and Monascus. The foodstuffs most frequently contaminated with CIT include cereals, cereal products, and red yeast rice. Studies on the occurrence of CIT in food have shown that the CIT concentrations in processed cereal-based products are generally lower than in unprocessed industry cereal samples. One possible explanation is the reaction of CIT with major food components such as carbohydrates or proteins to form modified CIT. Such modified forms of CIT are then hidden from conventional analyses, but it is possible that they are converted back into the parent mycotoxin during digestion. The aim of this study is therefore to investigate reactions of CIT with food matrix during thermal processes and to gain a deeper understanding of the degradation of CIT during food processing. In this study, we could demonstrate that CIT reacts with amino compounds such as proteins, under typical food processing conditions, leading to modified forms of CIT.

Evolution and modeling of texture changes and drying kinetics of bamboo shoots under high-humidity air-impingement blanching.

This study investigated the effect of hot water blanching (HWB), high-humidity air-impingement blanching (HHAIB), different HHAIB blanching times (2, 4, 6, 8, and 10min), and different HHAIB blanching temperatures (80, 85, 90, and 95°C) on texture quality, lignin content, weight loss, color, microstructure, and drying kinetics of bamboo shoots. After HWB treatment, the lignin content of bamboo shoots was apparently lower than that of HHAIB and the samples obtained the highest weight loss value of 6.13%. Both the texture values (brittleness and chewiness) and lignin content of bamboo shoots exhibited an overall downward trend as the HHAIB blanching time and blanching temperature increased. Specifically, the lignin content of bamboo shoots decreased from 5.59% to 4.58% with an increase in HHAIB blanching time from 2 to 10min and dropped from 5.48% to 4.63% as HHAIB blanching temperature increased from 80 to 85°C, respectively. The lignin content was proved to be positively correlated (p<0.05) with texture attributes (brittleness and chewiness). A second polynomial model was obtained for fitting the variation kinetics of lignin content during thermal processing. Reducing the HHAIB blanching time and blanching temperature would obtain a lower weight loss and a better color performance (ΔE and L*). Additionally, microstructure observation revealed that the distribution density of microchannels initially increased and then decreased with the extension of blanching time, while it continuously became firmer as HHAIB blanching temperature increased. Overall, the optimal processing parameters were achieved under the HHAIB blanching temperature of 85°C for 6min, ensuring a high-quality performance of bamboo shoot products.

Investigation of airflow thermal ice melting process under various flight conditions

The challenge of preventing and removing ice from exposed regions of aircraft is a significant engineering concern. Understanding the melting process of ice due to aerodynamic heating during flight is essential for developing UAV flight strategies in icy conditions. This paper analyzes the heat transfer mechanisms involved in airflow over ice and introduces a theoretical model to estimate the ice melting rate, using principles of turbulent heat transfer at the stagnation point. The study also discusses the impact of environmental conditions on ice melting rates. Findings indicate that the melting speed of the ice surface exhibits a negative linear correlation with the initial temperature of the ice, whereas it shows a nonlinear correlation with airflow velocity and total temperature of the incoming flow. Lower airflow velocity or total temperature of the incoming flow enhances the sensitivity of ice melting speed to changes. Additionally, lower ice density results in a higher melting speed, showing an exponential relationship with factors like average droplet diameter, airflow velocity, and airfoil leading edge diameter in the cloud field during icing. Experiments conducted using a small jet test bench and an icing wind tunnel confirmed the impact of varying conditions on ice melting rates. The deviation between experimental results and theoretical predictions was under 5 %. These conclusions offer valuable insights for flight safety planning of unprotected iced aircraft in challenging environments.

Comprehensive Measurement and Simulation of Prototype Injection Moulds

The injection moulding industry is dynamically developing. The growing demand for more customizable products can be served by low or middle volume production using prototype moulds and inserts. The conventional material of prototype moulds is aluminum because of its excellent machinability, acceptable strength and stiffness and outstanding thermal conductivity. Prototype moulds are gaining ground in the injection moulding industry, yet their operational behavior (including exact mechanical and thermal process parameters) is largely unknown. We created a comprehensive state monitoring system that measures the operational strain, cavity pressure and temperature of different prototype injection moulds. This way, all important process parameters can be measured and the relations between the moulding parameters and the operational pressure loads, deformations and temperatures can be quantified and analysed.

Geological factors in the sustainable management of mine water heating, cooling and thermal storage resources in the UK

Re-use of the UK's coal mine water heating, cooling and thermal storage resource is increasing in scale and the number of schemes. The upward trajectory requires 3D planning, regulation and licensing to manage sustainable deployment. We review geological factors controlling thermal and flow processes in the anthropogenically-altered subsurface, critical for resource management with multiple users of the same space. Potential interactions of mine water geothermal schemes with the wider environment are also summarized, leading towards concepts of 3D mine water thermal blocks, protection zones, or management strategies integrating heating, cooling and storage demands. Factors such as the magnitude, extent and timescale of thermal processes to underpin management approaches are poorly quantified by data measured at-scale under varying pumping rates and thermal loads. We demonstrate early insights of how two infrastructures, the UK Geoenergy Observatory in Glasgow and the Coal Authority's Mine Water Heat Living Lab in Gateshead, can measure and monitor heat-flow processes in real world settings to provide an evidence base. For example, a thermal storage test at Glasgow showed rapid temperature changes in the rock and mine workings at the re-injection borehole and indicated an influence of lithologically-controlled transmissivity and thermal conductivity on temperature dissipation and recovery.

Multifunctional Radiation Conditioning Emitter for Laser and Infrared with Adaptive Radiative Cooling.

With the development of technology, multifunctional multiband emitters have been paid much attention due to their wide range of applications, such as LIDAR detection, spectroscopic sensing, and infrared thermal management. However, the development of such emitters is impeded by incompatible structural requirements of different electromagnetic wavebands. Here, we demonstrate coupled modulation between near-infrared (NIR) laser-wavelength and long-wavelength-infrared by constructing a multifunctional emitter (MFE) with a structure of Al/HfO2/VO2, utilizing the phase transition of VO2. The MFE displays excellent thermal modulation capability within the 8-14 μm range, achieving a thermal insulation effect (ε8-14μm = 0.18) at low temperatures, and heat dissipation effect (ε8-14μm = 0.64) at high temperatures. The MFE's radiation power regulation capability is 145.06 W m-2 between a temperature of 0 to 60 °C. Moreover, the MFE possesses a large reflectivity modulation value of 0.78 at NIR laser-wavelength (1.06 μm) with a short phase transition time of 1003 ms under 3 W cm-2 laser irradiation. This study provides a guideline for the coordinated control of electromagnetic waves and intelligent collaborative thermal management through simple structural design, thus, having broad implications in energy saving and thermal information processing.

Mechanistic insights into the pyrolysis of pine resin sludge based on experiments and ReaxFF-MD simulation: High-value bio-oil production, nitrogen conversion, kinetics and environmental risk assessment

Forestry and agro-industrial waste conversion into high-value chemicals and fuels is considered one of the hottest ongoing research and industrial topics toward sustainable development. As one of the forestry and agro-industrial waste, pine resin sludge (PRS) with amino acids, pine resin residues and their derivatives such as abietic acid and 4-Epidehydroabietal, have ecological toxicity and require environmentally friendly treatment. Herein, a thermal process of PRS that generates high-value biofuels while reducing environmental pollution was reported. The results of the experiment and simulation reveal that the N of bio-oil is the major evolution direction of N, and the nitrogenous gas product is mainly NH3, a useful synthesis gas. ReaxFF-MD simulations elucidated the migration and conversion mechanism of nitrogen in amino acids. The main products of amino acid pyrolysis are 3-oxo-2-Propenenitrile, 2,4-Cyclopentadien-1-ylidenemethanone and 4R)-4-amino-5,5-dihydroxypentanoic acid. PRS's thermal weightlessness was divided into three phases, and the average activation under non-isothermal conditions was calculated at 78.17, 85.68, 206.42 kJ/mol (thermal decomposition) and final 117.78, 149.31, 195.54 kJ/mol (thermal oxidation). Thermal decomposition and oxidation process followed Avrami-Erofeev model (n=2), three-dimensional diffusion model (n=3) and mampel power (n=1). PY-GC/MS analysis shows that pyrolysis at different temperatures recovered mainly 4-Epidehydroabietal (37.15–89.67 %) for potential use as the biosynthesis of dehydrofolate. The bio-oil from PRS pyrolysis shows an excellent yield (31.43 %) and a high calorific value (37.21 MJ/kg), which is comparable to biodiesel. This work focused on offering an appealing and instructive guide for the logical treatment of sludge from pine resin production.

APPLICATION OF OHMIC HEATING IN THE FOOD INDUSTRY, IMPACT ON FOOD COMPONENTS AND "HURDLE APPROACH"

The application of thermal processes in the food industry causes a decrease in the quality of the final product, such as nutritional value and organoleptic characteristics. Many alternative methods offer uniform and rapid heating and provide the desired microbial lethality without reducing overall product quality. Ohmic heating is an emerging technique for food processing that has been used in recent decades as an alternative to conventional heating. It is a rapid heating method with big potential in the food industry. More particularly, ohmic heating of food is used for microbial inactivation, blanching, fermentation, gelatinization, peeling, evaporation, drying, extraction, pasteurization, and sterilization. This review summarizes the application of ohmic heating to different types of food products, the impact on food components, as well as the synergistic effect of ohmic heating with other non-thermal preservation techniques as well as the case of its combination with packed food items. The optimization of the ohmic heating approach reduces the duration of the process, achieves microbial and enzyme stability, increases the yield, and preserves the organoleptic and bioactive components in food commodities. Applying ohmic heating in combination with other non-thermal food preservation techniques such as UV-C radiation, pulsed electric field, high pressure, ultrasound, vacuum and the addition of preservatives contributes to reducing the intensity of the applied electric field, the temperature, and the treatment. In addition, it contributes to the extension of the shelf life as well as preserving the nutritional and organoleptic quality of food.

Trapped-atom Otto engine with light-induced dipole-dipole interactions

Abstract Finite-time quantum heat engines operating with working substances of quantum nature are of practical relevance as they can generate finite-power. However, they encounter energy losses due to quantum friction, which is particularly pronounced in many-body systems with non-trivial coherences in their density operator. Strategies such as shortcuts to adiabaticity and fast routes to thermalization have been developed although the associated cost requirements remain uncertain. In this study, we theoretically investigate the finite-time operation of a trapped-atom Otto engine with light-induced dipole-dipole interactions and projection measurements in one of the isochoric processes. The investigation reveals that when atoms are sufficiently close to each other and their dipoles are oriented perpendicularly, light-induced dipole-dipole interactions generate strong coherent interactions. This has enhanced engine efficiency to near unity and accelerate the thermalization process by sixtyfold. The interactions also boost engine performance during finite-unitary strokes despite the significant quantum friction induced by the time-dependent driving field. Furthermore, the projection measurement protocol effectively erases quantum coherences developed during both the finite-unitary expansion and finite thermalization stages and allows finite-time engine operation with an output power. This setup presents a compelling avenue for further investigation of finite-time many-body quantum heat engines and provides an opportunity to explore the full potential of photon-mediated dipole-dipole interactions.

Effects of different thermal processing methods on amino acid, fatty acid, and volatile flavor substance contents of Aohan millet (Golden seedling millet)

AbstractAohan millet has been cultivated for 8000 years and has rich nutritional value, such as high‐quality fatty acids and amino acids. Thermal processing is a conventional approach to food preparation. However, the effect of thermal processing on the formation of flavor substances in millet has not been clarified. Therefore, in this study, the effects of three different thermal processing techniques, namely, steaming, stir‐frying, and puffing, on the amino acids, fatty acids, and volatile flavor substances of Aohan millet were investigated using high‐speed automatic amino acid analyzer, headspace solid‐phase microextraction method, combined with gas chromatography–mass spectrometry (HS‐SPME/GC–MS) and gas chromatography (GC) with Aohan millet from Inner Mongolia as the raw material. All three thermal processing methods notably reduced the levels of protein, starch, polyphenols, and flavonoids in Aohan millet when compared to the raw millet (p &lt; .05). Amino acid and fatty acid contents demonstrated an increase in fried and puffed millet relative to steamed millet, with notable distinctions in amino acid and fatty acid contents between these two groups. Following the steaming process, there was a significant increase in the flavor compounds of Aohan millet, rising from 53 to 80, while this increase was not observed in the other two groups. The correlation analysis suggested that the formation of flavor compounds was predominantly influenced by the types and levels of amino acids. The study suggested that different heat treatments affected the amino acid, fatty acid, and more significantly flavor material content and composition of Aohan millet. In conclusion, steaming treatment could retain more nutrients and richer flavor substances; while puffing treatment would enhance amino acid and fatty acid content, which provides a fundamental basis for scientifically guided processing and rational culinary application of Aohan millet.

A review on advancements in emerging processing of whey protein: Enhancing functional and nutritional properties for functional food applications

AbstractWhey protein (WP) isolates are widely used in food products because they improve protein content, functional properties, and health benefits. It has been observed that WP can form conjugates with essential micronutrients, improving their dietary delivery and biological availability. WP and its derived bioactive peptides have potential health benefits in preventing chronic diseases. However, the off‐flavor and bitter peptides of WP are limiting factors that can be used in the food and beverage industries. Emerging innovative processing technologies, such as high hydrostatic pressure, ultrasonication, and extrusion, improve WP gelling ability, gel strength, and storage stability, providing high‐quality and healthy functional products. The integration of technological advancements into WP‐loaded fortified food products (FFPs) has increased the uptake rate of bioactive compounds, resulting in increased bioavailability and bioaccessibility in the human body. Furthermore, WP‐based FFPs treated with advanced thermal and nonthermal processing techniques possess better rheological properties, expansion ratios, and textural properties. Therefore, WP would be a promising and sustainable ingredient for developing stable functional foods. This review explores recent advancements in the processing technologies of WP, emphasizing their role in enhancing its bioavailability and functional properties for different food applications.

Analysis of thermal behavior and mass transport for manufacturing deep-small hole by ultra-high frequency induction-assisted laser wire deposition

Synchronous ultra-high frequency (UHF) induction-assisted laser deposition is an effective approach to tackle the extreme heat input and common defects that originate from laser direct deposition. The added auxiliary induction heat source can reduce the energy input of the laser heat source which guarantees the geometric integrity of the embedded tube and decreases temperature gradient. Meanwhile, the effective preheating of the induction heat source assures the metallurgical bonding among the substrate, deposited track and embedded tube. Experiments showed that the effective bonding can be formed among substrate-deposited track and deposited track-embedded tube under suitable combination parameters of the laser heat and induction heat. To gain insight into the hybrid deposition, a 3D numerical model coupled with multi-physical fields was established to explore the thermal process and flow behavior with assistance of induction heat. Results indicated that the electromagnetic force produced by induction coil promotes the flow velocity, which increases heat convection. Investigation on the induction heat parameter demonstrated that raising current intensity can accelerate the flow velocity from 0.07 m s-1 to 0.09 m s-1 while the maximum temperature of the molten pool declined from 2610 K to 2440 K owing to the reinforced heat convection. The experimental cross-section of the deposited tracks and the detected element distribution in transition areas are well tested against the numerical simulation results. The grain size in the top region of the deposited track is refined with increasing current intensity, which is experimentally and numerically verified by observed microstructure and G*R value. Meanwhile, the fabricated deposited track with average friction coefficient of 0.445 can be obtained when the laser and induction parameters are 1000 W and 400A, respectively.

Upcycling linear low-density polyethylene waste to turbostratic graphene for high mass loading supercapacitors

Linear low-density polyethylene (LLDPE) waste is difficult to upcycle into more valuable carbon materials because it tends to completely decompose into small molecules during thermal processing. In this work, LLDPE is upcycled into a high quality turbostratic graphene using a pre-treatment step to oxidatively crosslink the polymer with the assistance of solid additives (KCl and K2CO3) that improve crosslinking by increasing the effective surface area of the polymer melt during processing. After this pretreatment step, the crosslinked polymer could then be carbonized and catalytically graphenized between 400–950 °C without decomposition of the polymer feedstock. The LLDPE derived graphene (LLDPE-G) obtained from this process has a Brunauer–Emmett–Teller (BET) specific surface area, up to 1800 m2 g−1 and average Raman ID/IG and I2D/IG ratios of 0.85 and 0.57, respectively, indicating high quality graphene. When used as an electrode material in symmetric supercapacitors, LLDPE-G possesses a specific capacitance up to 175 Fg−1 at a mass loading of 20 mgcm−2, which is two times the commercial requirement, yielding an areal capacitance of 3.5 Fcm−2. Moreover, LLDPE-G exhibits exceptional cycling stability with a capacitance retention of 95.8 % after 100,000 cycles at a current density of 4.0 Ag−1. Additionally, the KCl and K2CO3 solids are recycled and reused over 3 complete reaction cycles to make new LLDPE-G with the material quality and electrocapacitive performance retained and verified after each cycle. Our approach creates new opportunities for upcycling waste LLDPE and other varieties of polyethylene into a higher value graphene used for electrochemical energy storage applications.

Tailoring thermal transport and confinement effect of GaN/Si3N4 nanowires utilizing core–shell architecture

The thermal transport properties of nanowires (NWs) can be significantly influenced by the implementation of a core-shell structure, which introduces interface scattering and phonon localization effects, opening avenues for novel applications. In this paper, we use the method of non-equilibrium molecular dynamics to simulate the effects of system temperature, cross-sectional width, and nanopillar interface on the thermal transport of GaN/Si3N4core-shell NWs. The thermal transport process of phonons in core-shell NWs is studied by calculating the vibrational density of states, phonon participation rate, and dispersion curve. The results show that the core-shell NWs characterized by smooth interfaces exhibit a 17.4% decrease in thermal conductivity (TC) at room temperature when contrasted with pristine GaN NWs. Furthermore, the TC of GaN/Si3N4core-shell NWs can be further reduced by adding nanopillars at the interface. Due to resonance effect, thus effectively regulating the thermal transport. The presence of nanopillars increases phonon-surface scattering intensity at low-frequency and modifies phonon dispersion to decrease the group velocity. In addition, the hybridization of phonon modes between those of the nanopillars and the Si3N4shell gives rise to numerous dispersionless resonance phonon modes that span the entire phonon spectrum. This research delves into the effects of nanopillars and interfaces on thermal transport, providing important guidance for understanding confinement effects and establishing a robust theoretical basis for the regulation of thermal transport.

Adsorptive removal of naproxen onto nano magnesium oxide-modified castor wood biochar: Treatment of pharmaceutical wastewater via sequential Fenton's-adsorption process.

This current investigation explored the thermal conversion process of castor wood into biochar, which was subsequently harnessed for removing naproxen from pharmaceutical industrial effluent via adsorption. Surface composition analyses conducted through scanning electron microscopy-energy dispersive X-ray, laser-induced breakdown spectroscopy, and Fourier-transform infrared studies unveiled the presence of nano MgO particles within the adsorbent material. Employing optimization techniques such as response surface methodology facilitated a refined approach to batch study. The optimized conditions for batch naproxen sodium (NPX) adsorption on nano-MgO-modified biochar were identified as pH 4, 1.5 g/L adsorbent dosage, and a 120-min contact time maintaining a constant NPX concentration of 10 mg/L. The adsorption capacity was calculated to be 123.34 mg/g for a nano-magnesium oxide-modified castor wood biochar (modified biochar) and 99.874 mg/g for pristine castor wood biochar (pristine biochar). Fenton's reagents comprising 15 mM of FeSO4 (7H2O) and 25 mM of H2O2 have been scrutinized under conditions of pH 3.0, a reaction time of 30 min, a temperature of 30°C, and stirring at 120 rpm, followed by batch adsorption treatment. The COD, NH3-N, NO3 -, PO4 3-, and NPX removal percentages was found to be 90%, 87%, 79%, 80%, and 90%, respectively. Thus nano MgO-modified biochar holds promise of treatment of pharmaceutical effluent.

Surface Nanojunction Enabled by Vapor‐Assisted π‐Conjugation Modification of Carbon Nitride for Enhanced Photocatalytic Water Splitting

The unsatisfied visible light harvesting, slow charge separation, and limited practical surface area of carbon nitride (CN) constrain its performance in photocatalytic water splitting and environmental remediation. Herein, the thermal vapor‐assisted π‐conjugation modification of CN by grafting with p‐aminophenoxy groups was developed to tune the photophysical properties of CN to enhance its photocatalytic activity. Besides extending the light absorption, the surface modification constructed a nanojunction across the depth direction, which leads to facilitated charge separation and transfer. In addition, the thermal vapor modification process thermally etches and trims the pristine CN to be highly holey structure, resulting to &gt;10 times increase in specific surface area. Photocatalysis results showed that the obtained modified CN yielded hydrogen from photocatalytic water splitting at a rate of 7.82 mmol/g/h, over 7‐folds as that of pristine CN, with quantum yield of 3.28% at 400 nm. The π‐conjugation modified CN also demonstrated enhanced photocatalytic environmental remediation application, exemplified by much faster photodegradation of tetracycline hydrochloride. This work provides the thermal vapor surface chemical modification of CN as a promising integrated pathway of multiple favorable photophysical properties towards efficient photocatalysis application.

Experimental evolution reveals that males evolving within warmer thermal regimes improve reproductive performance under heatwave conditions in a model insect.

Climate change is increasing mean temperatures, and intensifying heatwaves. Natural populations may respond to stress through shorter-term acclimation via plasticity and/or longer-term inter-generational evolution. However, if the pace and/or extent of thermal change is too great, local extinctions occur; one potential cause in ectotherms is identified to be the heat-liability of male reproductive biology. Recent data from several species, including the beetle Tribolium castaneum, confirmed that male reproductive biology is vulnerable to heatwaves, which may constrain populations. However, such reproductive-damage may be overestimated, if there is potential to adapt to elevated mean temperatures associated with climate change via evolution and/or acclimation. Here, we tested this to evaluate whether pre-exposures could improve heatwave tolerance (adaptation or acclimation), by experimentally evolving T. castaneum populations to divergent thermal regimes (30°C versus 38°C). Findings across assays revealed that relative to 30°C-regime males, males from the 38°C regime, maintained constantly at 8°C warmer for 25 generations, displayed an increase; i) in post heatwave (42°C) reproductive fitness by 55%, ii) survival by 33% and iii) 32% larger testes volumes. Unexpectedly, in the acclimation assay, warm-adapted males' post-heatwave survival and reproduction were best if they experienced cool developmental acclimation beforehand, suggesting a cost to adapting to 38°C. These results help progress knowledge of the potential for survival and reproduction to adapt to climate change; trait specific adaptation to divergent thermal regimes can occur over relatively few generations, but this capacity depended on the interaction of evolutionary and thermal acclimatory processes.