Physical properties and microstructural corrosion propertiesof Laser-bent 304 Stainless Steel Sheets

Abstract

Laser treatment by laser bending is a technique of treating sheet metal by thermal residual stresses generated by laser assisted heating without any externally applied mechanical forces. The advantages of laser assisted bending over conventional bending include flexibility of non-contact processing, amenability to materials with diverse shape/geometry, and high precision/productivity. Up to now, most of previous work on laser bending was concentrated on study of bending angles/shapes with laser operating conditions, and modelling of the thermal process, however, no work has been reported on corrosion behavior of the laser-bended components. Since the laser bending is a thermal process, it is believed that the thermal process could not only alter microstructure, but also affect corrosion performances, such as intergranular corrosion, due to possible sensitisation caused by repeating laser scans. The aim of the present work is to investigate corrosion performance of laser-bent 304 austenitic-steel sheet with thicknesses of 2 mm and 1.5 mm, respectively, using a 2 kW CO2 laser. After laser treatment, the laser-bent samples were characterised in terms of microstructural change within bent zones consisting of melt-zone and heat-affected zone, using optical microscopy and scanning electron microscopy (SEM). Hardness profiles were obtained across the bent zones. Corrosion performances of the laser-bent evaluated by means of electrolytic etching in oxalic acid and double-loop electrochemical potentiokinetic reactivation (DL-EPR) tests. Laser bending is a thermal process, it is believed that the thermal process could not only alter microstructure, but also affect corrosion performances, due to possible sensitisation caused by repeating laser scans.