Thermal Resistance Research Articles

Physicochemical quality improvement of dried rice noodles by direct heat-moisture treatment during the drying process

In view of the advantage of heat-moisture treatment (HMT) in modifying the properties of starchy materials, the purpose of this study was to explore the effects of directly applying HMT during the drying process on the properties of dried rice noodles. As attained to prescribed moisture content (20%–35%), the rice noodles were subjected to HMT at 110 °C for 2 h. By HMT, the dried rice noodles exhibited greater structural orderliness and thermal resistance. The relative crystallinity increased from 8.73% to 11.50% and the short-range order (the absorbance ratio of 1047 cm-1/1022 cm-1) increased from 0.57 to 0.72. On the contrary, the lamellar thickness, the radius of gyration, and the mass fractal dimension and pasting viscosities were lowered. Then, HMT induced dried rice noodles with restricted starch leaching during rehydration and reduced cooking loss. HMT increased microstructure homogeneity and texture properties of the cooked rice noodles. Notably, the heat-moisture treated rice noodles at 20% moisture content showed a significant higher cooking yield, about threefold of extensibility, and 1.68 folds of chewiness than the control. Our findings, if generally applicable to the processing of rice noodles, could offer a streamlined approach to increasing the quality of dried rice noodles.

Design of Co-Cured Multi-Component Thermosets with Enhanced Heat Resistance, Toughness, and Processability via a Machine Learning Approach.

Designing heat-resistant thermosets with excellent comprehensive performance has been a long-standing challenge. Co-curing of various high-performance thermosets is an effective strategy, however, the traditional trial-and-error experiments have long research cycles for discovering new materials. Herein, a two-step machine learning (ML) assisted approach is proposed to design heat-resistant co-cured resins composed of polyimide (PI) and silicon-containing arylacetylene (PSA), that is, poly(silicon-alkyne imide) (PSI). First, two ML prediction models are established to evaluate the processability of PIs and their compatibility with PSA. Then, another two ML models are developed to predict the thermal decomposition temperature and flexural strength of the co-cured PSI resins. The optimal molecular structures and compositions of PSI resins are high-throughput screened. The screened PSI resins are experimentally verified to exhibit enhanced heat resistance, toughness, and processability. The research framework established in this work can be generalized to the rational design of other advanced multi-component polymeric materials.

Enhancing geopolymer performance with silane-functionalized graphene oxide: Efflorescence reduction, pore refinement, and improved high-temperature properties

Geopolymer materials offer environmental benefits and strong mechanical properties but face limitations such as efflorescence, shrinkage, thermal stability and poor mechanical performance at high temperatures. This study introduces a novel solution using silane-functionalized graphene oxide nanocomposites (GO-APTS) to address these challenges. Experiments on metakaolin-based geopolymers demonstrate that incorporating GO-APTS improves dispersion, enhances mechanical strength, refines pore structures, and boosts resilience to high temperatures while reducing shrinkage and efflorescence, without compromising the workability of the mixes. Although the structural integrity of the material at nanoscale degrades beyond certain temperatures, the overall thermal resistance is significantly increased, with treated geopolymers displaying a ∼6 % improvement in porosity, ∼20 % higher residual compressive strength and ∼15 % reduction in shrinkage compared to control samples after exposure to heat. Our work reveals the promising potential of silanized graphene oxide nanocomposites in crafting cementitious materials suitable for high-temperature applications, paving the way for their broader use in innovative construction and industry solutions.

Biologically inspired piezoresistive MEMS acoustic vector sensor for underwater applications

Underwater acoustics has assumed a pivotal role in the detection, navigation, communication, and target identification of ships and submarines. In recent years, advancements in noise reduction from marine vessels have underscored the significance of underwater acoustic vector sensors. This paper presents a novel approach to the design, fabrication, and characterization of a two-dimensional Micro-Electro Mechanical Systems (MEMS) vector acoustic sensor tailored for underwater environments. Traditional underwater acoustic vector sensors often employ doped polysilicon or silicon/germanium sensing films on rigid silicon substrates. The inflexible nature of silicon substrates necessitates labor-intensive and costly chemical-mechanical polishing processes to achieve submicron thickness, often requiring extended clean-room usage. In contrast, this work proposes a simplified, cost-effective, and scalable alternative. The sensor design utilizes reduced graphene oxide (rGO) as the sensing material and Kapton as the substrate, chosen for their unique properties. rGO exhibits high carrier mobility and low intrinsic noise, ensuring clear signals with minimal external interference, thereby improving measurement accuracy in challenging environments. Kapton provides excellent thermal stability, mechanical strength, and chemical resistance, along with superior insulating properties that reduce electrical noise, enhancing the signal-to-noise ratio. The designed vector sensor leverages the piezoresistive transduction principle, incorporating a thin piezoresistive film of rGO on a flexible Kapton substrate via a straightforward drop-casting method. Inspired by the sensory mechanisms of aquatic life, the two-dimensional vector sensor not only detects pressure associated with acoustic signals but also discerns the direction from which these low and ultralow frequency signals originate. The device's performance characteristics, sensitivity, and directivity are comprehensively evaluated through static, dynamic, and acoustic tests conducted in both air and water mediums. Static tests reveal the piezoresistive behavior of rGO under applied displacement, yielding displacement sensitivities of 0.0279 V/mm and 0.0276 V/mm for axial and radial displacements, respectively. Dynamic and acoustic tests demonstrate the sensor's capability to detect low-frequency signals spanning from 0.25 Hz to 200 Hz, exhibiting a smooth and favorable frequency response. In air, the sensor exhibits receiving sensitivities ranging from −15.18 dB to −19.75 dB (X-channel) and −13.67 dB to −16.67 dB (Y-channel). In the underwater environment, these values range from −134.40 dB to −138.93 dB (X-channel) and −131.83 dB to −136.93 dB (Y-channel). Notably, the variation in receiving sensitivity across channels in both air and water is limited to within 6 dB. Furthermore, the device showcases a symmetrical directivity pattern resembling the shape of an "8," with an approximate sensitivity of −136.66 dB, a significant improvement compared to the −165 dB sensitivity of conventional polysilicon underwater vector sensors. These experimental findings affirm the feasibility of the proposed underwater vector sensor, based on the piezoresistive effect and MEMS technology, highlighting its two-dimensional directivity capabilities.

Long-Term Estimation of Depositions on Heating Surface During Boiling of Long-Life Coolant

Abstract Long-term boiling experiments with long-life coolant have been made with the aim to apply a boiling cooling technology to the next generation high exothermic electronic devices. The long-life coolant commonly used for cooling electronic devices is a mixture of ethylene glycol and water with multiple antirust inhibitors as additives, which may result in some depositions on the heat transfer surface during the boiling. In this study, the heat transfer surface made of copper was set vertically, and long-term experiments have been performed under the pool boiling. The deposition process was monitored for constant heating conditions. From experimental results, a distinct surface temperature change was observed under constant heat flux conditions. Just after keeping constant heat flux, the surface temperature increases with time, a certain time later decreases, and finally takes a stable value. During the temperature rise, the deposition adheres to the heat transfer surface in dots, which may cause an increase in thermal resistance between the wall surface and the working fluid. However, during the temperature drop, large growth of dot-like depositions on the heat transfer surface could alter wettability and surface roughness, enhancing boiling heat transfer. In addition, to investigate the characteristics of the depositions adhered to the heat transfer surface, a component analysis has been performed, which shows that the main substance was strontium hydroxyapatite, which might be formed by chemical reaction between components in the additives under the boiling.

Design of strong-performance, high-heat dissipation rate, and long-lifetime triboelectric nanogenerator based on robust hexagonal boron nitride (hBN) nanosheets/polyvinyl chloride (PVC) composite films for rotational energy harvesting

Here, we design a rotational structure on a triboelectric nanogenerator (TENG) using a robust hexagonal boron nitride nanosheets/polyvinyl chloride (hBN nanosheets/PVC) composite film as a triboelectric material, leading to strong output performance, high heat-dissipation rate, and long lifetime. At a rotor-stator contact pressure of 0.85 N with a rotational speed of 400 r/min, the optimized 2 wt %-hBN nanosheets/PVC-based TENG can produce a peak output voltage of 142 V with a current of 272 μA, leading to a maximum power of 30.7 mW, which can continuously power some tiny electronics. Note that the surface temperature of the device is 2.4 °C lower than that of the pure PVC film-based TENG after 10 min of continuous operation at 250 r/min. Moreover, the 2 wt %-hBN nanosheets/PVC composite film exhibits the surface charge density, the thermal conductivity, and the friction coefficient of 620 μC/m2, 0.26 W/mk and 0.27, which are 87.3 % higher than, 36.8 % higher than, and 32.5 % lower than that of pure PVC film, providing a new strategy for designing triboelectric materials with high surface charge density, good thermal conductivity and low wear resistance.

Scalable Compliant Graphene Fiber-Based Thermal Interface Material with Metal-Level Thermal Conductivity via Dual-Field Synergistic Alignment Engineering.

High-performance thermal interface materials (TIMs) are highly desired for high-power electronic devices to accelerate heat dissipation. However, the inherent trade-off conflict between achieving high thermal conductivity and excellent compliance of filler-enhanced TIMs results in the unsatisfactory interfacial heat transfer efficiency of existing TIM solutions. Here, we report the graphene fiber (GF)-based elastic TIM with metal-level thermal conductivity via mechanical-electric dual-field synergistic alignment engineering. Compared with state-of-the-art carbon fiber (CF), GF features both superb high thermal conductivity of ∼1200 W m-1 K-1 and outstanding flexibility. Under dual-field synergistic alignment regulation, GFs are vertically aligned with excellent orientation (0.88) and high array density (33.5 mg cm-2), forming continuous thermally conductive pathways. Even at a low filler content of ∼17 wt %, GF-based TIM demonstrates extraordinarily high through-plane thermal conductivity of up to 82.4 W m-1 K-1, exceeding most CF-based TIMs and even comparable to commonly used soft indium foil. Benefiting from the low stiffness of GF, GF-based TIM shows a lower compressive modulus down to 0.57 MPa, an excellent resilience rate of 95% after compressive cycles, and diminished contact thermal resistance as low as 7.4 K mm2 W-1. Our results provide a superb paradigm for the directed assembly of thermally conductive and flexible GFs to achieve scalable and high-performance TIMs, overcoming the long-standing bottleneck of mechanical-thermal mismatch in TIM design.

Thermally Stable and Transparent Polyimide Derived from Side-Group-Regulated Spirobifluorene Unit for Substrate Application.

Advancements in flexible electronic technology, especially the progress in foldable displays and under-display cameras (UDC), have created an urgent demand for high-performance colorless polyimide (CPI). However, current CPIs lack sufficient heat resistance for substrate applications. In this work, four kinds of rigid spirobifluorene diamines are designed, and the corresponding polyimides are prepared by their condensation with 5,5'-(perfluoropropane-2,2-diyl) bis(isobenzofuran-1,3-dione) (6FDA) or 9,9-bis(3,4-dicarboxyphenyl) fluorene dianhydride (BPAF). The rigid and conjugated spirobifluorene units endow the polyimides with higher glass transition temperature(Tg) ranging from 356 to 468 °C. Their optical properties are regulated by small side groups and spirobifluorene structure with a periodically twisted molecular conformation. Consequently, a series of CPIs with an average transmittance ranging from 75% to 88% and a yellowness index (YI) as low as 2.48 are obtained. Among these, 27SPFTFA-BPAF presents excellent comprehensive performance, with a Tg of 422 °C, a 5wt.% loss temperature (Td5) of 562 °C, a YI of 3.53, and a tensile strength (δmax) of 140MPa, respectively. The mechanism underlying the structure-property relationship is investigated by experimental comparison and theoretical calculation, and the proposed method provides a pathway for designing highly rigid conjugated CPIs with excellent thermal stability and transparency for photoelectric engineering.

Mitochondrial Fission Is Involved in Heat Resistance in Zebrafish.

Global warming and extreme weather events pose a significant threat to global biodiversity, with rising water temperatures exerting a profound influence on fish conservation and fishery development. In this study, we used zebrafish as a model organism to explore the impact of a heat acclimation period on their survival rates. The results demonstrated that a 2-month heat acclimation period almost completely mitigated heat stress-induced mortality in zebrafish. Subsequent analysis of the surviving zebrafish revealed a predominance of hepatic mitochondria in a fission state. Remarkably, a short-term fasting regimen, which induced hepatic mitochondrial fission, mirrored the outcomes of the protective effect of heat acclimation and augmented animal survival under heat stress. Conversely, treatment with a mitochondrial fission inhibitor within the fasting group attenuated the elevated survival rate. Furthermore, zebrafish embryos subjected to brief heat acclimation also exhibited increased heat resistance, a trait diminished by a chemical intervention inhibiting mitochondrial fission. This suggests a shared mechanism for heat resistance between embryos and adult zebrafish. These findings underscore the potential use of inducing mitochondrial fission to enhance heat resistance in zebrafish, offering promise for fish biodiversity conservation in the face of global warming.

A Screening Apparatus for Comparing the Fouling Resistance of Heat Exchanger Surfaces

AbstractFouling is a challenge in many processes, especially in heat exchangers and evaporators. Even though many treatments have been developed to mitigate fouling on metallic surfaces, no standardized method exists to compare equipment based on its antifouling performance. In this work, a screening apparatus is presented, which allows to compare samples of treated metallic surfaces based on thermal fouling resistance. A parameter screening and a ranking of three differently treated metallic surfaces using two model substances, namely, whey protein concentrate (WPC) and calcium sulfate, are demonstrated.

A Poly(aryl Ether Sulfone) Containing Bis-phthalazinone with High Thermal Resistance

A Poly(aryl Ether Sulfone) Containing Bis-phthalazinone with High Thermal Resistance

Design and Simulation of Adiabatic–Damping Dual–Function Strut for LH2 Storage Tank

In the process of the on–board transportation of liquid hydrogen storage and transportation tanks, apart from considering the support strength and adiabatic performance, it is imperative to take into account the vibration characteristics of the carrying platform. The present work introduces a versatile support structure comprising a damping module and a ball contact insulation structure, enabling effective isolation of external vibrations while simultaneously providing support and insulation. The first step involves describing the principle of a flexible support structure and designing the mechanical structure. Subsequently, a damping analysis is conducted based on dynamic theory to establish the relationship between the spring and damping. Finally, the structural parameters of the dual–function strut are determined, followed by simulation of heat transfer performance. The results demonstrate that the dual–function strut exhibits exceptional vibration damping performance by reducing the amplitude of external vibrations greater than 5 Hz to less than 6%. Moreover, owing to the compact linear diameter spring structure of the vibration damping module and its ball contact effect, the thermal resistance of the dual–function strut is significantly enhanced, resulting in a mere heat leakage of only 22 W/m2 in a single rod section.

Improving energy consumption for dynamic intake and exhaust FAÇADES: A new setup design: Part B

Dynamic insulation technology adjusts thermal resistance to reduce building energy consumption in response to climate changes. Sustainable building practices prioritize optimizing the building envelope to enhance energy efficiency and regulate the interaction between indoor and outdoor environments. The previous part of this study (Part A) provided an overview of dynamic insulation technology and its potential effectiveness in Iraqi structures with intermittent heating and cooling. The successful implementation of dynamic thermal insulation necessitates careful planning and design solutions that balance performance and efficiency. This paper (Part B) three wall models (static, dynamic, modified dynamic) to evaluate their thermal performance during the heating season. The results demonstrate that the intake facade achieves a preheating efficiency of 77% for the dynamic wall and 81.8% for the modified dynamic wall at the maximum permissible fresh air limit. This improvement in efficiency enhances the quality and conditions of fresh air intake. Additionally, the modified dynamic wall exhibits a notable 50% reduction in pressure loss compared to the dynamic wall, resulting in lower intake or exhaust fan power and thus energy consumption. The results of this paper will guide the presentation of cooling season results and the experimental aspect of future work, offering valuable insights for further exploration. Practical applications This study aims to enhance the efficiency of dynamic facades by investigating the physical phenomena within wall layers. The paper delves into the determination of optimal airflow patterns within facades, the assessment of airflow path modifications, and the evaluation of energy efficiency achieved by implementing dynamic insulation at the intake and exhaust facades during the heating season. The findings contribute to streamlining design complexities and expanding design options for specific climates, thereby ensuring the pragmatic implementation of this technology.

Sandwich-structured In–Ga alloy phase change thermal pad with low thermal resistance and leakage prevention

Sandwich-structured In–Ga alloy phase change thermal pad with low thermal resistance and leakage prevention

Melting of PCM-graphite foam composites with contact thermal resistance: Pore-scale simulation

Latent heat energy storage systems have emerged as a solution to intermittency and instability in renewable energy sources, the phase transition of phase change materials (PCMs) within these systems is hindered by their poor thermal conductivity. Graphite foam, renowned for its superior thermal properties, stands as an ideal choice to improve the melting efficiency of PCMs. In the current study, the melting behavior of PCM-graphite foam composites is simulated by the pore-scale numerical simulation (PNS) by employing cubic idealized cells with spherical pores and cylindrical channels. The computed results demonstrate that the porosity and contact thermal resistance of graphite foam are key factors affecting the melting efficiency of PCMs. The full melting time (FMT) of PCMs increases with porosity, achieving a 53.1 % improvement as porosity decreases from 0.90 to 0.75. In addition, the absence of natural convection markedly diminishes the maximum melting rate of PCM, reducing it by 33.5 % to 50.3 % for porosity from 0.75 to 0.90. Notably, it needs to be emphasized that the melting rate of PCM is significantly reduced when the contact thermal resistance surpasses 1.0 × 10–4 m2·K·W−1. Compared to the idealized condition without contact thermal resistance, the dimensionless FMTs for porosities of 0.75, 0.80, 0.85, and 0.90 extend by 27.3 %, 27.1 %, 22.2 % and 23.9 % for a contact thermal resistance of 5.0 × 10–4 m2·K·W−1, respectively.

Investigating polyurethane foam loaded with high-z nanoparticles for gamma radiation shielding compared to Monte Carlo simulations

Since the beginning of research into radiation and protection against it, the importance of searching for proper materials against radiation hazards has been recognized. Gamma radiation protection materials usually deal with heavy elements with high prices, which are hard to maintain. Polyurethane-based (PU) materials are popular in sound and thermal insulation due to, their low-weight properties and, most importantly, fast and convenient construction ingredients. PU foams (PUF) can be used as radiation shield and noise and heat resistance due to their approachability, light-weight, high resistance, and comfortable construction. This study involved simulation and an experiment to construct and investigate the properties of Polyurethane material doped with lead oxide as a gamma shield. The shield was considered in several weight fractions of lead, yielding several samples. The MCNPX 2.6 Monte Carlo code has been utilized for simulation procedure, and 137Cs was employed as the gamma source in both simulation and experiment. The results offer a promising response against the gamma radiation and are suitable for attenuating gamma rays.

Wetsuit Thermal Resistivity Measurements

In recent years, attention to the realization and characterization of wetsuits for scuba diving and other sea sports or activities has increased. The research has aimed to establish reliable and standardized measurement methods to objectively assess wetsuit quality, particularly focusing on their mechanical and thermal properties. In this work, we describe and compare two different measurement methods for the characterization of neoprene wetsuit thermal resistivity. The first method follows the existing regulations in the field, while the second one, which we are originally proposing in this paper, offers an alternative yet accurate way based on a simplified experimental set-up and easier measurements. In both cases, the wetsuit sample under testing was shaped in the form of a cylindrical sleeve of proper dimensions and wrapped around a phantom containing water at a higher temperature and surrounded by water at a lower temperature. The wetsuit’s cylindrical surface allows heat flow from the warmer water on the inside to the colder water on the outside through the wetsuit area. In the first case, a thermal steady state was achieved, with constant heat flow from the phantom to the exterior. This was obtained with a power balance between two homogenous quantities. Electrically supplied thermal heating within the phantom was used to balance the thermal energy naturally flowing through the wetsuit’s surface. In this first case, a stable and fixed temperature difference was obtained between the inner and the outer surfaces of the wetsuit sample. In the second case, a thermal transient was analyzed during the cooling process of the phantom, and the thermal time constant was measured, providing the sample thermal resistance once the phantom thermal capacity was known. In both cases and methods, the heat flow and thermal resistance of other elements than the wetsuit must be evaluated and compensated for if they are not negligible. Finally, the thermal resistivity per unit area of the wetsuit material was obtained with the product of the wetsuit sample’s thermal resistance and the wetsuit area. The measurements, conducted until now by immersing the phantom in a free surface tank, show that both methods—under stationary and under transient temperature conditions—were valid to assess the wetsuit’s thermal resistivity. The stationary method somehow provided better accuracy while involving less well-known parameters but at the expense of a more complicated experimental set-up and additional energy consumption. The transitory method, on the other hand, is quite easy to implement and, after careful characterization of the phantom’s parameters, it provided similar results to the stationary one. An uncertainty budget was evaluated for both methods, and they did provide highly compatible measurement results, with resistivity values of 0.104(9) m2·K/W (stationary method) and 0.095(9) K·m2/W (transient method) for the same wetsuit sample under testing, which is also consistent with the values in the literature. We finally propose that the novel method is a valid alternative for characterization of the thermal insulation properties of a scuba diving wetsuit.

Heat transfer performance of the vapor chamber with spiral support-composite wick

Inefficient heat dissipation in vapor chambers (VCs) is a major challenge for their development and application. To investigate the effect of supports on VCs’ maximum thermal power and thermal resistance, the relationship between the number of supports and the vapor channel pressure drop is studied through pressure drop measurement. Composite Wick Vapor Chambers (CWVCs) with various supports are fabricated and tested with a constructed thermal performance test platform. The results indicate that the heat transfer performance of CWVC is related to the number of supports and the liquid filling ratio. The optimum filling ratio of the composite wick with 3-6 spiral supports (SS3-SS6) is 60%, 70%, 90%, and 70%, with corresponding maximum thermal power of 19.25 W, 25.61 W, 25.97 W, and 21.22 W. The thermal resistance of SS4-CWVC is lower overall. Additionally, when the power is 21 W, the surface temperature difference of the condenser of SS3-CWVC and SS6-CWVC is 2.3 °C and 1.3 °C, respectively. However, the condenser surface temperature difference of SS4-CWVC is 66.5% lower than that of SS3-CWVC and 40.8% lower than that of SS6-CWVC at the same power. Therefore, SS4-CWVC exhibits better temperature uniformity and has better heat transfer performance.

Advanced, high‐performance thermo‐insulating plaster

AbstractThe main purpose of many current studies regarding energy efficiency is the improvement of the thermal resistance of buildings. To fulfill this goal, the development of advanced insulating materials, to be incorporated in the building envelopes, is imperative. Aerogels are ultralight porous materials typically produced via the sol‐gel process followed by supercritical drying of the wet gel. They exhibit very high porosities and a mesoporous‐macroporous structure which endows aerogels with extremely low thermal conductivity. This makes them ideal candidates for ambient thermal insulation applications. However, the cost for aerogel insulation is considerably higher than the one of standard insulation products. In the present work, highly porous aerogel‐like materials based on silica and commercial novolac resin were developed and added to common mortars. The prepared materials were dried under ambient pressure to minimize the manufacturing cost. The bulk density of silica quasi‐aerogels was 0.03 g/cm3–0.09 g/cm3 and that of the novolac resin samples 0.09 g/cm3–0.21 g/cm3. The aerogels were incorporated in mortars and cured for 28 days before measurement of thermal conductivity. The values of the thermal conductivity coefficient of the measured samples were 0.047 W/m K–0.058 W/m K for the silica reinforced mortars and 0.036 W/m K–0.044 W/m K for the novolac reinforced ones.

Study on the flow and heat transfer characteristics inside high-porosity open-cell copper foams: Experimental and numerical explorations

A metal foam with an open-cell structure is a type of material with low flow resistance, high specific surface area, and strong fluid mixing ability. Open-cell metal foams have broad application prospects in electronic component cooling, multiphase heat exchangers, and compact heat exchangers for aerospace applications. This paper presented experimental and numerical analyses of the flow and heat transfer characteristics of five different copper foams under forced air convection. The pores per inch (PPI) of selected foams were 10, 20, 30, 40, and 60, with porosities ranging from 0.968 to 0.973. Analysis of the collected heat transfer and pressure drop data yielded the overall heat transfer coefficient, unit pressure drop, normalized average wall temperature, inertia coefficient, and resistance coefficient. The influence mechanisms of the porosity and flow velocity on heat transfer were analyzed and discussed. The numerical simulation and experiment fitted well. The results showed that increasing porosity led to a significant increase in heat transfer coefficient and unit pressure drop. The 60 PPI foam brought the maximum pressure drop while achieved the minimum thermal resistance.