Thermal Energy Research Articles

A More Transparent Infrared Window

AbstractThe infrared window region (780–1,250 cm−1, 12.8 to 8.0 μm) is of great importance to Earth's climate due to its high transparency and thermal energy. We present here a new investigation of the transparency of this spectral region based on observations by interferometers of downwelling surface radiance at two DOE Atmospheric Radiation Measurement program sites. We focus on the dominant source of absorption in this region, the water vapor continuum, and derive updated values of spectral absorption coefficients for both the self and foreign continua. Our results show that the self continuum is too strong in the previous version of Mlawer‐Tobin_Clough‐Kneizys‐Davies (MT_CKD) water vapor continuum model, a result that is consistent with other recent analyses, while the foreign continuum is too weak in MT_CKD. In general, the weaker self continuum derived in this study results in an overall increase in atmospheric transparency in the window, although in atmospheres with low amounts of water vapor the transparency may slightly decrease due to the increase in foreign continuum absorption. These continuum changes lead to a significant decrease in downwelling longwave flux at the surface for moist atmospheres and a modest increase in outgoing longwave radiation. The increased fraction of surface‐leaving radiation that escapes to space leads to a notable increase (∼5–10%) in climate feedback, implying that climate simulations that use the new infrared window continuum will show somewhat less warming than before. This study also points out the possibly important role that aerosol absorption may play in the longwave radiative budget.

Quantifying vertical borehole heat exchanger sustainability from a geothermal resource perspective in the UK

Low-temperature geothermal energy is viewed as a renewable resource that could contribute to the decarbonization of residential heating in the UK. Here, we constrain the geothermal potential of the shallow subsurface to provide the heating requirements of a typical single-family house via a vertical borehole heat exchanger (BHE), to provide a preliminary framework for the heat resource licensing of such systems. Through analytical and numerical models, we calculate the heat balance for a typical house with a garden located in a Carboniferous sedimentary basin, which represents a large proportion of the UK land mass and the regions where energy poverty is more common. Neglecting the heat recharge via groundwater flow, our results indicate that geothermal, solar heat flux and radiogenic heat production can only replenish up to 5% of the heat extracted annually by a 100 m-long BHE in heat extraction-only mode. The lack of natural recharge causes the continuous expansion of the thermal footprint at an average rate of 18 m 2 a −1 over 30 years, considering a ground thermal conductivity of 2.2 W m −1 °C −1 , with the area cooled by 1°C extending beyond the current minimum BHE spacing guidelines of 6 m. In Scotland, reinjecting c . 35% of the yearly heat requirements, which could be accomplished through borehole thermal energy storage, is shown to safeguard against resource over-exploitation and interference risks between neighbouring users in the majority of the high-demand areas. In view of a large deployment of BHEs, it is crucial to incorporate such reinjection strategies into a regulatory framework to ensure a resilient and sustainable utilization of shallow geothermal resources.

Mechanical properties of hcp Fe at high pressures and temperatures from large-scale molecular dynamics simulations

We study the elastic behavior of hexagonal close-packed (hcp) Fe at the high temperature and pressure conditions of the Earth Core, using an embedded-atom method interatomic potential adjusted to those conditions. We calculate diffusivity, elastic constants, density, bulk modulus, shear modulus, and sound velocities vs temperature. We obtain reasonable agreement with ab initio simulations and with other empirical potential simulations. Our densities and shear modulus are slightly higher than those in the preliminary reference earth model for the core. Phase stability is discussed in terms of the Born criteria and free energies, finding that hcp is mechanically stable and that the free energy difference between hcp and body-centered cubic (bcc) is very small compared to the thermal energy. We compare our simulated shear modulus G to several analytical models, obtaining excellent agreement with the Atom in Jelium model by Swift and co-workers. Assuming that the yield strength Y is equal to the shear modulus G, Y=G/30, we find reasonable agreement with a recent parametrization of the Steinberg–Guinan model. These results can lead to future large-scale, multi-million simulations of Fe under core conditions for samples with microstructure like grain boundaries and twins, which might be present under those conditions.

Elastocaloric Performance of Natural Rubber in Solid State Cooling: Evaluation of the Effect of Crosslinking Density

Elastocaloric cooling is recognized as a promising alternative to modern vapor-compression cooling systems, which often rely on environmentally hazardous refrigerants. Natural rubber (NR), a well-known renewable resource, stands out among elastomers exhibiting elastocaloric behavior due to a peculiar combination of nontoxicity, low cost, softness, long-life fatigue and high caloric power. Despite these properties, research on the refrigeration potential of NR is still in its early stages, and several aspects require attention. This work investigates, for the first time, the effect of crosslinking density on the elastocaloric properties of NR. Samples with three different crosslinking densities (2.9, 4.0 and 5.2 mol·10−4/cm3) were produced by internal compounding and hot pressing, and thermo-mechanically characterized. The assessment of the elastocaloric effect of the produced samples revealed that reducing the crosslinking degree significantly enhanced the elastocaloric properties. To compare the cooling capacity of the samples, a qualitative coefficient of performance (COPmat) was evaluated as the ratio between extracted thermal energy and deformational work per unit volume. The results highlight that the least crosslinked sample achieved the higher COPmat, equal to 2.4. These results underscore the significance of crosslinking density as one of the primary factors to be considered to enhance the refrigeration potential of NR.

Current role of focal therapy in prostate cancer.

Thanks to the improved accuracy of multiparametric Magnetic Resonance Imaging (mpMRI) to detect and localize the dominant index lesion on prostate cancer (PCa), the concept of minimally invasive focal treatments (FT) has gained popularity. Nevertheless, although high-quality evidence that FT has favorable functional outcomes, definitive proof of its oncological effectiveness compared to standard treatments remains underreported. This study aims to explore the efficacy, safety, oncologic and functional outcomes of different type of FT for PCa. A non-systematic literature review was conducted by searching on PubMed "prostate cancer" AND "focal treatment" OR "HIFU" OR "irreversible electroporation" OR "cryoablation" OR "focal laser ablation." Overall, 22 articles published in English literature from 2018 to 2023 describing FT techniques for PCa were included. Related to the field ablated, focal therapies include hemiablation (half gland), focal ablation (zonal-base) or targeted therapy (lesion-based). FT modalities can be categorized in thermal and non-thermal energy: thermal energy techniques include high-intensity focused ultrasound (HIFU), cryotherapy, radiofrequency ablation (RFA), and focal laser ablation (FLA). Focal brachytherapy, irreversible electroporation (IRE), and vascular-targeted photodynamic therapy (VTP) are classified as non-thermal ablation. Each focal ablative treatments could be promising alternative to conventional radical therapies to treat PCa in term of mid-term oncologic and functional outcomes, however, limited data are available in comparison with standardized radical treatments. HIFU and Cryo are the most studied techniques and seem to be superior to radical treatments in term of functional outcomes despite associated with higher recurrence and retreatment rate. Current evidences of oncologic and functional outcomes of FT are based mainly on retrospective, non-comparative and single center studies. Thus, none of the focal therapies available should be considered safe alternative to standardized treatments in routine practice and should be offered only for well selected PCa patients with low or at least favorable-intermediate risk disease, unfit for radical options.

Study of Ionanofluids Behavior in PVT Solar Collectors: Determination of Thermal Fields and Characteristic Length by Means of HEATT® Platform

Solar electric and solar thermal energies are often considered as part of the solution to the current energy emergency. The pipes of flat plate solar devices are normally heated by their upper surfaces giving rise to an asymmetric temperature field in the bulk of the fluid, which influences the heat transfer process. In the present work, a study of the characteristic length of tubes, or most efficient distance at which heat transfer occurs, in flat photovoltaic-thermal (PVT) hybrid solar devices has been carried out using three heat transfer fluids: water, [Emim]Ac ionic liquid and ionanofluid of graphene nanoparticles suspended in the former ionic liquid. The mean objective of the study was to know whether the heat transfer occurs in optimal conditions. Experimental measurements have been made on a commercial PVT device, and numerical simulations have been performed using the HEATT® platform to determine the characteristic length of the process. The tests conducted showed a clear improvement in the temperature jump of the fluid inside the collector when INF is used compared to water and ionic liquid and even a higher overall energy efficiency. Electricity generation is not greatly affected by the fluid used, although it is slightly higher when water is used. Slower fluid velocities are recommended if high fluid outlet temperatures are the goal of the application, but this penalizes the overall thermal energy production. The characteristic process length is not typically achieved in parallel tube PVT collectors with ordinary flow rates, which would require a speed, and consequently, a flow rate, about 10 times lower, which penalizes the performance (up to four times), although it increases the fluid outlet temperature by 234%, which can be very interesting in certain applications. Ionanofluids may in the medium term become an alternative to water in flat plates or vacuum solar collectors for applications with temperatures close to or above 100 °C, when their costs will hopefully fall. The results and methodology developed in this work are applicable to solar thermal collectors other than PVT collectors.

Thermoanalytical and Kinetic Studies for the Thermal Stability of Emerging Pharmaceutical Pollutants Under Different Heating Rates

Emerging pharmaceutical pollutants like ciprofloxacin (CIP) and ibuprofen (IBU) are frequently detected in aquatic environments, posing risks to ecosystems and human health. Since pollutants rarely exist alone in the environment, understanding the thermal stability and degradation kinetics of these compounds, especially in mixtures, is crucial for developing effective removal strategies. This study therefore investigates the thermal stability and degradation kinetics of CIP and IBU, under different heating rates. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were employed to examine the thermal behavior of these compounds individually and in mixture (CIP + IBU) at heating rates of 10, 20, and 30 °C/min. The kinetics of thermal degradation were analyzed using both model-fitting (Coats–Redfern (CR)) and model-free (Kissinger–Akahira–Sunose (KAS), Flynn–Wall–Ozawa (FWO), and Friedman (FR)) methods. The results showed distinct degradation patterns, with CIP decomposing between 280 and 550 °C and IBU between 152 and 350 °C, while the mixture exhibited multistep decomposition in the 157–500 °C range. The CR model indicated first-order kinetics as a better fit for the degradation (except for IBU). Furthermore, CIP exhibits higher thermal stability and activation energy compared to IBU, with the KAS model yielding activation energies of 58.09 kJ/mol for CIP, 11.37 kJ/mol for IBU, and 41.09 kJ/mol for CIP + IBU mixture. The CIP + IBU mixture generally showed intermediate thermal properties, suggesting synergistic and antagonistic interactions between the compounds. Thermodynamic parameters (ΔH°, ΔG°, ΔS°) were calculated, revealing non-spontaneous, endothermic processes for all samples (except in the FWO method) with a decrease in molecular disorder and positive ΔG° values across all models and heating rates. The study found that higher heating rates led to less thermodynamically favorable conditions for degradation. These findings provide important information concerning the thermal behavior of these pharmaceutical pollutants, which can inform strategies for their removal from the environment and the development of more effective waste-treatment processes.

Exergy Analysis of a District Heating System with a Predictive Model Based on Neural Network Algorithms

The article presents an exergy analysis of a district heating system (DHS) that incorporates a predictive model based on neural network algorithms. The study focuses on evaluating the thermodynamic efficiency of the DHS when these methods are applied, enabling the prediction of temperature changes and rapid adjustment of system parameters to enhance efficiency. The impact of increasing the number of connected consumers on the exergy efficiency of the DHS with the predictive model (DHPM) is examined. The use of neural network algorithms, such as LSTM, significantly enhances the system's ability to predict external temperature changes and respond promptly, resulting in optimized energy consumption and improved exergy efficiency, particularly at the beginning and end of the heating season. A comparative analysis of the exergy efficiency of traditional DHS and the system with the predictive model is included. The exergy analysis is based on modeling the system’s performance with varying numbers of consumers. The results indicate that an increase in the number of consumers leads to a rise in exergy efficiency due to better energy distribution management. The potential for significant thermal energy savings and reduced operational costs through the use of predictive methods is discussed. The study confirms that applying neural network algorithms in predictive models of DHS can substantially improve efficiency and reliability, leading to a more rational use of energy resources, cost reduction, and minimized environmental impact. The findings support the adoption of these methods in large-scale district heating systems for optimization and enhanced energy efficiency.

Enhancing thermal performance of phase change materials in building envelopes

AbstractPhase change material in conjunction with a passive latent heat thermal energy storage approach is a potentially effective way to solve the growing concerns about building energy usage. This research examines the thermal performance of building envelopes in Miskolc, Hungary. The factors impacting the thermal performance of phase change material integrated into the building envelope were assessed. The findings indicate that the enthalpy and melting temperature of the phase change material significantly impact the effectiveness of phase change material-based walls. It was determined the optimal location of the phase change material layer is possible. This determination is intricately related to the thermal properties of the phase change material and the prevailing environmental conditions.

Innovative Strategies for Thermal Energy Optimization and Renewable Energy Integration in Net-Zero-Energy Buildings: A Comprehensive Review

The thermal performance and energy efficiency of buildings are critical factors in achieving sustainable energy systems as energy needs for heating and cooling are expected to represent more than 50% of global final energy consumption. This study analyzes conventional renewable energy systems for heating and cooling in buildings, focusing on strategies for developing net-zero-energy buildings. This review covers the integration of renewable energy, the use of intelligent energy management systems, and the optimization of thermal processes. It also compares various systems based on their advantages and limitations and analyzes emerging trends in the thermal management of buildings in different climate zones. The synthesis of recent literature highlights practical recommendations for achieving high thermal performance in buildings, including the importance of selecting appropriate energy systems based on local climatic conditions, optimizing system efficiency, and taking advantage of new materials and advanced technologies. This review aims to contribute to promoting sustainable construction practices with the integration of renewable energy sources and improving the energy efficiency of buildings.

Light-Triggered Droplet Gating Strategy Based on Janus Membrane Fabricated by Femtosecond Laser.

The characteristics of the directed transport of liquids based on Janus membranes play a crucial role in practical applications in energy, materials, physics, chemistry, medicine, biology, and other fields. Although extensive progress has been made, it is still difficult to realize the accurate controllability of liquid directional transmembrane transport. The current gating strategies for the directed transport of liquids based on Janus membranes still have some limitations: (a) using magnetic fluid may cause contamination due to the addition of new substances and (b) utilizing hydrophobicity/hydrophilicity conversion of titanium dioxide requires a long switching time (over 30 min). Herein, a strategy is proposed to precisely control liquid directional transport by altering the wettability of droplets on Janus films prepared by a femtosecond laser through photothermal effects. Infrared laser irradiation on Janus film coated with CNTs can effectively convert light energy into thermal energy, rapidly increase the surface temperature of Janus film, and change the wettability of the liquid on the film. Liquid transmembrane directional transport can be achieved within a few seconds without contaminating the transported liquid. The proposed gating strategy can enable the application of Janus membranes in various scenarios such as microchemical reactions, biological cell culture, and interface self-propulsion.

Heat Transfer Efficiency While Cooling with a Water Spray, Air-Assisted Water Spray and Water Jet Under Boiling and Single-Phase Forced Convection Conditions

The main purpose of this paper was to determine and compare the boundary conditions of heat transfer on the cooled surface of a cylindrical sensor made of Inconel 600 alloy while cooling with a water jet, water spray and air-assisted water spray under high-temperature conditions. The inverse method for the heat conduction equation was used to determine the boundary conditions. Experimental tests were carried out, including temperature measurements at several points inside the cylinder while cooling with all the tested systems from a temperature of 900 °C for three values of water pressure: 0.05 MPa, 0.1 MPa and 0.2 MPa. Temperature measurements were used as the input data to identify the heat transfer boundary conditions. The temperature field of the axially symmetric sensor was determined using the finite element method. The boundary conditions were determined as average values of the heat transfer coefficient and heat flux and local values of the heat transfer coefficient. A comparison of the amount of thermal energy dissipating from the sensor surface as a result of boiling and a forced single-phase convection is also presented in the paper. The highest uniformity of cooling was obtained during air-assisted water spray-cooling.

A rare case of endotracheal tube cuff leakage with no detectable decrease in cuff pressure.

Common causes of air leakage around an endotracheal tube include insufficient endotracheal tube cuff inflation and damage to the cuff, while damage to the pilot balloon or pilot balloon tubing is relatively rare. A 74-year-old female with vertebral osteomyelitis was scheduled for an extreme lateral interbody fusion followed posterior fixation. A fiber-optic light was utilized as part of the surgical illuminator. A sudden decrease in tidal volume and airway pressure was noted intraoperatively. We suspected leakage around the endotracheal tube cuff; however, no decrease in cuff pressure was detected. Despite the normal cuff pressure, we decided to inject a small amount of air which led to a significant increase in the cuff pressure. Upon careful inspection of the endotracheal tube, we discovered that the pilot balloon tubing was damaged as a result of thermal energy emitted by the fiber-optic light, which had ignited the surgical drape. The pilot balloon tubing was partially severed in which the section proximal to the endotracheal tube cuff was burned and punctured, causing the cuff leak. Meanwhile, the section proximal to the pilot balloon had melted and occluded the lumen, resulting in a falsely normal cuff pressure reading followed by an elevated cuff pressure when a small amount of air was injected into the pilot balloon during troubleshooting. Appropriate ventilation was resumed after extubation and re-intubation with a new endotracheal tube. We experienced an endotracheal tube cuff leakage caused by a damaged pilot balloon tubing due to thermal energy of the fiber-optic light. Our case report emphasizes the importance of suspecting damage to the endotracheal tube cuff and inflation system despite a normal cuff pressure reading, given that the measurement may be falsely elevated depending on the specific location of the damage. In addition, all operating personnel should be familiarized with safety warnings and cautions related to handling.

Exact solutions of a class of generalized nanofluidic models

Abstract Nanofluid, a significant branch of fluid mechanics, plays a pivotal role in thermal management, optics, biomedical engineering, energy harvesting, and other fields. The nanoparticles present in the fluid render the continuum mechanics ineffective, necessitating the adoption of fractional calculus to elucidate the effects of nanoparticles on the motion properties of the nanofluid. This article applies the modified extended tanh-function technique to solve two classical Schrödinger equations, the fractional Phi-4 model and the conformable fractional Boussinesq model, for nanofluids. Multiple exact solutions are obtained, and the corresponding graphical representations are provided to elucidate the basic properties of the nanofluid. This article provides new research perspectives for the development of nanofluids.

Assessing thermal and economic performance of solar dryers in sustainable strategies for bottle gourd and tomato preservation.

The traditional approach of open-sun drying is facing contemporary challenges arising from the widespread adoption of energy-intensive methods and the quality of drying. In response, solar dryers have emerged as a sustainable alternative, utilizing solar thermal energy to effectively dehydrate vegetables. This study investigates the performance of a single-basin, double-slope solar dryer utilizing natural convection for drying bottle gourds and tomatoes, presenting a sustainable alternative to traditional open-sun drying. The solar dryer exhibited superior moisture removal efficiency, achieving a 94.42% reduction in tomatoes and 83.87% in bottle gourds, compared to open-sun drying. Drying rates were significantly enhanced, with maximum air and plate temperatures reaching 54.42°C and 63.38°C, respectively, accelerating the dehydration process. Moisture diffusivity analysis revealed a marked improvement in drying behavior under solar drying, with values ranging from 3.12 × 10-11 to 4.31 × 10-11 m2/s for bottle gourds, and 4.65 × 10-11 to 2.31 × 10-11 m2/s for tomatoes. Energy efficiency assessments highlighted the solar dryer's advantage, with exergy efficiency peaking at 61.78% for bottle gourds and 68.5% for tomatoes. Furthermore, the activation energy required for drying was significantly lower in the solar dryer (29.14-46.41kJ/mol for bottle gourds and 27.16-55.42kJ/mol for tomatoes) compared to open-sun drying, enhancing energy conservation. Visual inspections confirmed the superior quality of the solar-dried vegetables, free from dust and impurities. An economic analysis underscored the system's viability, with payback periods of 2 years for bottle gourds and 1.6 years for tomatoes. Overall, this study demonstrates the efficacy of solar dryers in optimizing vegetable preservation while promoting energy efficiency, aligning with global sustainability goals by reducing post-harvest losses and supporting eco-friendly practices.

Fractional modeling of bioconvection in Jeffrey nanofluids with gyrotactic organisms

AbstractThe current study examines how mass and heat transfer affect mobility of Jeffrey fluid while taking sun radiation across the vertical plate into account. In the polyvinyl alcohol water base fluid, the study combines gyrotactic organisms with copper nanoparticles. Microorganisms classified as gyrotactic respond to gravitational and viscous forces by swimming and orienting themselves, which results in the formation of patterns known as bioconvection, which is the result of the collective movement of these microorganisms. The main goals are to address the growing uses of solar plates by creating a unique mathematical model for flow and thermal properties of the parabolic trough solar collector (PTSC) installed on solar panel. Sunlight is directed onto a single focal line by curved mirrors in PTSCs, which heat the fluid moving over the plate at this focused line. The momentum, heat, and mass equations are solved by the model using Fourier and Fick's laws. The Laplace transform is then used to convert the solution sets into dimensionless Partial differential equation (PDE) for the velocity, energy, and mass fields. The innovative aspect of this model is its in‐depth examination of non‐Newtonian nanofluids, which are boosted by the addition of gyrotactic organisms and copper nanoparticles to increase heat transfer efficiency. The impacts of several factors on flow characteristics, including the Lewis number, mass Grashof number, Grashof number for bioconvection, magnetic and electric parameters, Peclet number, chemical reaction parameter, and Prandtl number, are shown graphically. Increasing the radiation parameters and volume fraction results in a noticeable improvement in the temperature profile. By demonstrating the superior heat transfer capabilities of non‐Newtonian nanofluids in solar energy applications, this work advances the field. It is particularly relevant to microchip cooling, solar energy systems, and thermal energy systems. In summary, the work provides a comprehensive model that advances our understanding of heat and mass transfer in non‐Newtonian nanofluids that are exposed to ambient sunlight. In the future, the model will be employed in real solar energy systems to confirm its effectiveness. The findings have applications in the development of temperature control technology and solar energy systems that are more effective.

Unit commitment in solar‐based integrated energy distribution systems with electrical, thermal and natural gas flexibilities: Application of information gap decision theory

AbstractThe depleting oil reserves, air pollution and increasing energy demand, have overturned the focus of the scientific community to renewable energy sources. Among which the photovoltaic (PV) systems occupy more than half of the market share and are generally installed at the distribution level. The volatile and uncertain nature of these PV productions necessitates flexible resources in energy systems. To this end, the district heating systems have an outstanding flexibility on account of their high thermal inertia. This study investigates the optimal unit commitment scheduling for gas‐fired and non‐gas‐fired distributed generation units (NGU) in an integrated energy distribution system (IEDS) within the physical constraints of the electrical, natural gas and thermal energy distribution networks. Moreover, a planning‐based optimization framework is proposed to investigate the investment of battery storage systems in the electric distribution network under the high penetration of PV systems with the aim of enhancing flexibility and reducing the operating costs of the IEDS. In this framework, the information gap decision theory is deployed under risk‐averse and risk‐seeker strategies to deal with uncertain PV energy production. Additionally, the environmental emissions are considered in a multi‐objective approach. The IEDS is embodied through IEEE 33‐bus EDS, 20‐node natural gas network and an 8‐node district heating systems. Eventually, The proposed approach makes a noteworthy contribution to the advancement of solar energy systems in IEDS.

Integration of a solid oxide electrolysis system with solar thermal and electrical energy: A testing campaign for operation and control strategy definition

AbstractThe EU project PROMETEO has the scope of testing a 25 kW solid oxide electrolysis system integrated with a concentrated solar power plant via thermal energy storage in a relevant environment. Given the plant layout and the hydrogen demand characteristics, this work aims to identify how to operate the system effectively when renewable electricity is unavailable and how to modulate the load during hydrogen generation, thus defining the system's operation modes and control strategy. A 5 kWe stack has been tested at the FBK facility. The hot standby tests show that feeding a reducing gas at the negative electrode and air at the positive electrode, without polarizing the stack, effectively keeps the stack hot at 750°C and prevents degradation. Conversely, the electric protection approach leads to significant stack degradation (15% voltage drop in 200 h for one cluster). Regarding modulation of hydrogen generation, with low steam flowrates, the stack current and the flow rate of produced hydrogen mainly depend on the steam flow rate, while it is not affected by the stack temperature; conversely, with high steam flowrates, the current depends only on the stack temperature (from 25 A at 670°C to 65 A at 760°C). Based on the results, two hot standby modes and two load control strategies to be implemented and tested in the PROMETEO prototype are proposed.

Thermal Analysis of a Simplified Railway Brake Model with Numerical Simulation

The braking system is the most important safety device in all vehicles. When braking, the kinetic energy of the vehicle is converted into thermal energy. The use of friction brakes can cause problems in the long term, as the brake can heat up, reducing its coefficient of friction. Heating and cooling have a harmful effect on all frictional elements, causing material fatigue. As a result of the negative effects, the hot brake cannot reduce the velocity of the vehicle at the correct rate. In this paper, the propagation of frictional heat is analysed in a test specimen made of cast iron material using different numerical simulations. The computational results are validated with the results obtained during measurement. With proper validation, the brake discs are able to be modelled at different designs and materials without having to manufacture a test specimen for each case. In the study, it is important to point physical quantities to carry out the simulation.

Overexpression of HvVDE gene improved light protection in transgenic tobacco (Nicotiana tabacum).

Hosta is commonly acknowledged as a popular and preferred plant for landscaping and gardening. The 'sunburn' caused by prolonged exposure to strong sunlight is reducing the ornamental values of Hosta plants. However, there is a scarcity of research focusing on the genetic components linked to light-induced harm in Hosta . Here, the violaxanthin de-epoxidase (VDE) homolog from Hosta ventricosa was isolated and functionally identified through conducting HvVDE -overexpression tobacco (Nicotiana tabacum ) lines. The results showed that HvVDE encodes a putative protein comprising 481 amino acids with a molecular weight of 54.304kDa. The phylogenetic analysis found that HvVDE exhibited close similarity to JcVDE. Besides, the expression patterns of HvVDE found that HvVDE was expressed differently across tissues, withexpression induced by high light intensities. And overexpression of HvVDE led to the restoration of non-photochemical quenching in tobacco, suggesting that HvVDE plays a role in dissipating excess light energy as thermal energy in H. ventricosa . These findings underscore the significance of HvVDE in mitigating photoinhibition and enhancing photoprotection mechanisms in H. ventricosa .