Thermal Effects Research Articles

Analysis of APB in vertical wells with evaporite layers: A 1D axisymmetric multilayer thermomechanical model

Temperature increases and creep in saline rocks can cause annular pressure buildup (APB), presenting a significant challenge in oil well operations, particularly in deep and ultra-deep pre-salt fields. This paper proposes a one-dimensional axisymmetric multilayer thermomechanical model that accounts for the influence of evaporite layers and thermomechanical effects on APB. We developed a finite element model that integrates heat transfer and thermomechanical interactions, utilizing a double deformation mechanism as a constitutive model to represent the viscous behavior of the rock formation. Additionally, this model enables the iterative calculation of fluid properties based on temperature and pressure conditions. To validate the model, we conducted case studies using widely adopted commercial finite element software. Its consistent results provide a deeper understanding of the pressure increases caused by the influence of saline rock and thermal effects, offering valuable insights into the safe and efficient operation of oil wells using a model with reduced computational complexity.

Thermo-magnetic convection of MHD Casson fluid in a wavy triangular porous cavity with embedded a cold inverted triangle obstacle

The design of enclosures is crucial in thermal engineering applications and technologies, encompassing areas such as electronics, heat transfer devices, power reactors, heating systems, solar panels, and nuclear power plants. Thermal efficiency in microchannels is optimized and improved by using triangular enclosures with varying aspect ratios. Specifically, the purpose of these triangular enclosures with cool cylinders is to reduce energy loss in nanoscale thermal sinks and thermal exchange devices. The current study aims to explore the thermal radiation effects on magnetohydrodynamic MHD Casson fluid flow within a wavy triangular cavity that includes an embedded cold inverted triangle. The inner inverted triangle is kept at a lower temperature, while the wavy bottom wall of the outer triangular cavity acts as an isothermal heat source at a higher temperature. The numerical solution for this mathematical model is obtained using the open-source finite element software COMSOL. In this study, the wavy triangular enclosure is analyzed for key parameters such as Casson parameter β , Hartmann number Ha , Rayleigh number Ra , numbers of undulation N , radiation Rd and inclination γ . The study presents the local distribution of streamlines, velocity profiles, isothermals, and entropy production, along with the Nu avg . The results reveal the rate of heat transport and total entropy production raise with the increasing number of undulations N and the Casson parameter β , while they decrease with increasing Hartmann number Ha . The number Nu avg rises with the increasing radiation parameter Rd and Rayleigh number Ra . The maximum stream function is observed at an inclination angle of 60 ° .

YADE - An extensible framework for the interactive simulation of multiscale, multiphase, and multiphysics particulate systems

This contribution presents the key elements of YADE, an extensible open-source framework for dynamic simulations. During the past 19 years, YADE has evolved from “Yet Another Dynamic Engine” to a versatile multiscale and multiphysics solver, counting a large, active, and growing community of users and developers. The computationally intense parts of the source code are written in C++, using flexible object models that allow for easy implementation of new features. The source code is wrapped in Python, equipping the software with an interactive kernel used for rapid and concise scene construction, simulation control, post-processing, and debugging. The project, including documentation and examples, is hosted on https://yade-dem.org, while the source code is freely available on GitLab. Over the last decade, YADE has expanded in terms of capabilities thanks to the contribution of many developers from different fields of expertise, including soil and rock mechanics, chemical engineering, physics, bulk material handling, and mineral processing. The rapid growth of YADE can be attributed to (1) the careful and robust design of the framework core, (2) a continuous integration pipeline with fully embedded thorough tests which are executed upon each merge request, ensuring stable compilation for various operating systems, and (3) user-friendliness, facilitated by the Python interface, detailed documentation, and rigorous user support. In this paper, we review the main features of YADE, highlighting its versatility in terms of applications, its flexibility in terms of code development, as well as recent improvements in terms of computational efficiency. Program summaryProgram Title: YADE - Yet Another Dynamic EngineCPC Library link to program files:https://doi.org/10.17632/n4f5fw97rd.1Developer's repository link:https://gitlab.com/yade-dev/trunkLicensing provisions: GNU General Public License 2Programming language: C++, PythonNature of problem: Numerical simulation of many-particle systems requires accurate models for particle-to-particle interactions, efficient contact detection between objects of various shapes, and robust time integration. In addition, the flow of fluids, thermal effects, as well as other coupled problems in the presence of particles are found in many fundamental and practical applications and they need dedicated computational tools. YADE provides a computational framework to perform such simulations using the discrete element method and multiple extensions of it.Solution method:YADE simulates particulate systems using the Discrete Element Method (DEM) in a flexible platform combining C++ and Python. It provides a large variety of shape and interaction models, an explicit time-integration scheme, and many post-processing tools. YADE features dedicated solvers for both fluid and heat fluxes at the pore scale, and it supports couplings with third-party software such as Escript (finite element method) and OpenFOAM (computational fluid dynamics).

Pulsed laser induced plasma and thermal effects on molybdenum carbide for dry reforming of methane

Dry reforming of methane (DRM) is a highly endothermic process, with its development hindered by the harsh thermocatalytic conditions required. We propose an innovative DRM approach utilizing a 16 W pulsed laser in combination with a cost-effective Mo2C catalyst, enabling DRM under milder conditions. The pulsed laser serves a dual function by inducing localized high temperatures and generating *CH plasma on the Mo2C surface. This activates CH4 and CO2, significantly accelerating the DRM reaction. Notably, the laser directly generates *CH plasma from CH4 through thermionic emission and cascade ionization, bypassing the traditional step-by-step dehydrogenation process and eliminating the rate-limiting step of methane cracking. This method maintains a carbon-oxygen balanced environment, thus preventing the deactivation of the Mo2C catalyst due to CO2 oxidation. The laser-catalytic DRM achieves high yields of H2 (14300.8 mmol h−1 g−1) and CO (14949.9 mmol h−1 g−1) with satisfactory energy efficiency (0.98 mmol kJ−1), providing a promising alternative for high-energy-consuming catalytic systems.

An analytical study of thermal environment’s effect on the free vibration of FGM double curved FG shells

The main objectif of this work is to examine the thermal environment’s effect of on the free vibration of double curvature shells made of functionally graded materials. A new mathematical model based on higher order shear deformation theory, is developed to incorporate the influence of dependent and independent thermal stresses, which can be uniform, linear, nonlinear, or sinusoidal on the mechanical properties of the double curvature shell. Two material couples, ( S i 3 N 4 / SUS 304 , ZrO 2 /Ti‐6Al‐4V ) , are considered as progressive materials, accounting for temperature-dependent and temperature-independent heat conduction and material properties in the thickness direction. The temperature field is assumed to be uniform across the shell surface but varies only in the thickness direction. The accuracy of the analytical results is validated by comparing them with existing literature results for functionally graded material (FGM) shells with infinite radii under dependent and independent temperature conditions. The study aims to demonstrate the thermal effects on material composition, as well as various specific geometric shapes such as plates, cylinders, spheres and ellipses and how different temperature laws influence the frequencies of vibrating double curvature FGM shells. Both existing theories accurately predict temperature-independent and temperature-dependent vibration responses of the shells. By verifying and comparing the results with the literature, a better agreement is achieved, thereby paving the way for further research in this field.

An analytical study of thermal environment’s effect on the free vibration of FGM double curved FG shells

The main objectif of this work is to examine the thermal environment’s effect of on the free vibration of double curvature shells made of functionally graded materials. A new mathematical model based on higher order shear deformation theory, is developed to incorporate the influence of dependent and independent thermal stresses, which can be uniform, linear, nonlinear, or sinusoidal on the mechanical properties of the double curvature shell. Two material couples, ( S i 3 N 4 / SUS 304 , ZrO 2 /Ti‐6Al‐4V ) , are considered as progressive materials, accounting for temperature-dependent and temperature-independent heat conduction and material properties in the thickness direction. The temperature field is assumed to be uniform across the shell surface but varies only in the thickness direction. The accuracy of the analytical results is validated by comparing them with existing literature results for functionally graded material (FGM) shells with infinite radii under dependent and independent temperature conditions. The study aims to demonstrate the thermal effects on material composition, as well as various specific geometric shapes such as plates, cylinders, spheres and ellipses and how different temperature laws influence the frequencies of vibrating double curvature FGM shells. Both existing theories accurately predict temperature-independent and temperature-dependent vibration responses of the shells. By verifying and comparing the results with the literature, a better agreement is achieved, thereby paving the way for further research in this field.

Glass-Forming Ability, Mechanical Properties, and Energetic Characteristics of ZrCuNiAlNbHfY Bulk Metallic Glasses.

The effects of partially substituting Al for Cu in Zr59.62Cu18.4-xNi12Al6+xNb3Hf0.78Y0.2 (x = 0, 2, 4, 6, 8 at.%) bulk metallic glasses (BMGs) on their glass-forming ability (GFA), quasi-static and dynamic mechanical properties, and energy characteristics were investigated. The results showed that an appropriate substitution of Al for Cu can improve GFA and reach a critical casting size up to 10 mm. Additionally, with Al replacement of Cu, the change in the distribution and content of free volume inside the BMGs was the main reason for the quasi-static compression plasticity. In contrast, the BMGs exhibited no plasticity during dynamic compression and high-speed impact, owing to the short loading time and thermal softening effect. In terms of energy characteristics, all alloys have a high combustion enthalpy. And on the surface of the fragments collected from impact, the active elements Zr, Al, and Nb reacted because of the adiabatic temperature rise. Further, x = 4 at.% Zr-based BMG with its superior overall performance could penetrate a 6 mm Q235 plate at a speed of 1038 m/s, combining excellent mechanical properties and energy characteristics. This study contributes to the development of Zr-based BMGs as novel energetic structural materials.

Numerical simulation of local and upwind temperature stratification on flow and dispersion in a bi-dimensional street canyon.

The thermal effect mainly includes boundary temperature stratification and the local thermal effect. The combined effect of these factors on flow and dispersion in a bi-dimensional canyon was investigated by the RANS and LES methods to evaluate their performance. The results, including the flow field, turbulent kinetic energy, temperature, heat flux, pollutant concentration and fluxes, were compared with the data from wind tunnel experiments. The comparison results showed that the RANS method severely overestimated the impact of windward heating on the flow in the canyon because of the lack of simulated flow separation ability and the limitation of the Boussinesq model, leading to an incorrect flow field and an incorrect temperature and concentration. In contrast, LES performed better mainly because of its ability to simulate flow separation. LES regenerated the right vortexes, flow field and low wind velocity. LES slightly overestimates the overall temperature in the canyon because heat exchange is eliminated in LES but difficult to avoid in the experiment. The difference in the air exchange rate at the roof level between the LES and wind tunnel data was no more than 5%, and the pollutant concentration distribution of the LES was almost the same as that of the experiments. This work emphasizes that the RANS method has limited ability to simulate flow and dispersion when the thermal effect is considered even at a reduced-scale, while LES can simulate the combined effects of incoming flow temperature stratification and local thermal effects. It is therefore suggested that if computing resources are limited and the temperature difference is not large, a steady-state calculation RANS can be used. Otherwise, LES must be performed.

Roles of heat and stress transfer in triggering fault instability in conjugate faulted reservoirs

The presence of multiple conjugate but non-intersecting faults in geothermal reservoirs presents issues related to fault interaction in the presence of complex coupled thermo-hydro-mechanical (THM) processes in influencing the triggering of seismicity. We examine alternate strategies in stimulating such a conjugate-faulted geothermal reservoir analogous to that hosting the Mw 5.5 Pohang earthquake (2017). We evaluate the response of the reservoir to both short-term stimulation (1y) and long-term production (10y), both with and without thermal effects – for a large fault (F1) adjacent to a non-intersecting smaller fault (F2) and in a reverse faulting stress regime. Results suggest that the slip on either fault impacts the stress state on the other fault through stress transfer. Reactivation of the minor fault (F2) transfers stress towards to the upper part of primary fault (F1), inducing instability. The slip of the major fault is delayed by positioning the location of injection away from the junction between the two faults – decreasing the injection depth from 4087.5 m to 3712.5 m delays the time to slip by 2.61 y. Furthermore, thermal stress plays a decisive role in prompting late-stage fault reactivation for long-term fluid circulation where pore pressures have already reached steady state. The pattern of thermal unloading follows the path of fluid transport and heat transfer along the faults. Overall, this study not only advances our understanding of mechanisms of injection-induced fault instability in EGS reservoirs with multiple and closely-interacting faults, but also provides insights into how different injection strategies can delay or mitigate induced seismicity.

Rectification of heat current in Corbino geometry.

We prove analytically the ballistic thermal rectification effect (BTRE) in the Corbino disk characterized by an annular shape. We derive the thermal rectification efficiency (RE) and show that it can be expressed as the product of two independent functions, the first dependent on the temperatures of the heat baths and the second on the system's geometry. It follows that a perfect BTRE can be reached with the increase of the ratios of the heat baths' temperatures and of the radius of the outer edge to the inner edge of the disk. We also show that, by introducing a potential barrier into the Corbino disk, the RE can be greatly improved. Quite remarkably, by an appropriate choice of parameters, the thermal diode effect can be reversed. Our results are robust under variation of the Corbino geometry, which may provide a flexible route to manipulate the heat flow at the nanoscale.

Unveiling thermal and hemodynamic effects of aneurysm on abdominal aorta using power law model and finite element analysis

The objective of this study is to find causes of aortic diseases and investigating the ways for better treatment. The governing system of equations has been demonstrated to account for characteristics of blood. The governing system of equation has been solved using the finite element method with appropriate boundary conditions. We analyzed into the relationship between flow characteristics via the aneurysmal abdominal aorta and the aneurysm height, aneurysm length, and non-Newtonian behavior. It investigates how thermal and hemodynamics effects change across the abdominal aortic aneurysm. The velocity, pressure, and temperature surface plots of the results are displayed. There have also been graphic displays of line graphs of axial velocity, radial velocity, axial pressure, radial pressure, axial temperature and radial temperature across the aneurysm. The blood flow simulations obtained results show that increasing blood temperature, pressure and intake velocity all contribute to an increase in viscosity. The results indicate that while the temperature varies little to not at all, the blood flow pressure decrease and velocity significantly vary.

Ocena ryzyka przypadkowej inicjacji półfabrykatów zawierających artykuły pirotechniczne o przeznaczeniu technicznym w branży motoryzacyjnej

The identification of the danger of accidental initiation, respectively the establishment of the causes and the possibilities that can generate the triggering of pyrotechnic devices with a technical destination in the automotive field containing pyrotechnic articles of the P1 category, is carried out for each piece of equipment depending on the phases of the technological process of their manufacture. The protection against the accidental initiation of pyrotechnic devices intended for equipping auto vehicles is of particular interest for occupational safety in the manufacturing process of these types of products, because their triggering can endanger the life and health of workers as a result of the uncontrollable effects of functioning, with the generation of thermal and dynamic effects, as well as the emission of toxic reaction products that can affect the human component and/or destroy the work space. The paper highlights the way to analyse the risk of accidental initiation of pyrotechnic devices actuator type from the P1 category, using the latest generation technical-scientific tools in order to computerize the effects following their untimely triggering and establish the safety distances in relation to the amplitude of the degree of damage to the human component, respectively the destruction caused to the work space. In the case of pyrotechnic articles from category P1 type pyrotechnic actuator, the main risks of their accidental initiation are determined by the following technical factors: the production of an electrical discharge greater than 25 KV, the generation of a current with an intensity greater than 0.4 A at the terminals pyrotechnic device, their exposure to a temperature higher than 165°C. The main effects generated after the untimely initiations of these products are determined by: flame, thermal radiation, dynamic pressure waves, projected fragments and hazardous releases of chemical combustion products. Depending on the results obtained following the estimation and assessment of the assessed risks, preventive and countermeasures of a technical and organizational nature are established, in order to secure the predicTab. operations of specific operations with these types of products.

Precursor-Driven Catalytic Performances of Al2O3-Supported Earth-Abundant Ni Catalysts in the Hydrogenation of Levulinic Acid and Hydroxymethylfurfural into Added-Value Chemicals.

It has been shown that the nature of the metal precursor and the thermal effects during calcination determine the physicochemical properties of the catalysts and their catalytic activity in the levulinic acid (LA) and 5-hydroxymethylfurfural (HMF) hydrogenation reactions. The endothermic effect during calcination of the inorganic nickel precursor promoted higher metal dispersion and stronger interaction with the alumina surface. In contrast, the exothermic effects during the calcination of organic nickel precursors resulted in smaller metal dispersion and lower interaction with the support surface. A clear relationship was found between the size of the metal crystallites and the yield of LA hydrogenation reaction. The smaller crystallites were more active in the LA hydrogenation reaction. In turn, the size of the metal particles and their nature of interaction with the surface of the alumina influence the hydrogenation pathways of the HMF.

A comprehensive kinetic study on low-GHG hydrogen production from microwave-driven methane pyrolysis

The present study focuses on the cogeneration of hydrogen (H2) and solid carbon from microwave-driven methane pyrolysis in a fluidized bed of carbon pellets. Numerical simulations using a coupled gas-solid chemistry approach reveal that introducing microwave thermal effects improves methane conversion rate, H2 selectivity, and carbon deposition rate. The chemical pathways analysis divulges that once the leading reaction for decomposing CH4 into H2, i.e., CH4+H ↔ CH3+H2, is completed, the C2H2 deposition mechanism onto the carbon pellets is the dominant pathway for the solid carbon production, indicating almost no carbon black (i.e., nanoparticles) formation. Carbon pellets provide abundant surface area for the conversion of C2H2 to H2, enhancing H2 selectivity in the resulting products. More importantly, the importance of more complex molecules, such as polycyclic aromatic hydrocarbons, greatly diminishes when using carbon pellets in the pyrolysis process, implying that smaller kinetic mechanisms are equally effective and desirable.

Thermo-Chemo-Mechanical Modeling of Residual Stress in Unidirectional Carbon Fiber-Reinforced Polymers during Manufacture.

The application of carbon fiber-reinforced composite materials in marine engineering is growing steadily. The mechanical properties of unbonded flexible risers using composite tensile armor wire are highly valued. However, the curing process generates a certain amount of internal residual stress. We present a detailed analysis of epoxy resin laminates to assess the impact of thermal, chemical, and mechanical effects on the curing stress and strain. An empirical model that correlates temperature and degree of cure was developed to precisely fit the elastic modulus data of the curing resin. The chemical kinetics of the epoxy resin system was characterized using differential scanning calorimetry (DSC), while the tensile relaxation modulus was determined through a dynamic mechanical analysis. The viscoelastic model was calibrated using the elastic modulus data of the cured resin combining temperature and degree of the curing (thermochemical kinetics) responses. Based on the principle of time-temperature superposition, the displacement factor and relaxation behavior of the material were also accurately captured by employing the same principle of time-temperature superposition. Utilizing the empirical model for degree of cure and modulus, we predicted micro-curing-induced strains in cured composite materials, which were then validated with experimental observations.

ENVİRONMENTAL PROTECTİON AGAİNST THE EFFECTS OF CLİMATE CHANGE THE ROLE OF GIS İN İTS FORMATİON

The article provides information about climate changes, which have become one of the global problems, and their impact on the living world, which worries the world community more and more. Unstable weather conditions are felt not only in Azerbaijan but also in several countries of the world and create problems. Increasing attention to these problems is manifested in the holding of a number of international events, including scientific and practical conferences. According to the latest assessment report of the Intergovernmental Panel on Climate Change, the average temperature on Earth has increased by 0.8 degrees in the last 100 years. The increase in temperature is mainly due to anthropogenic factors. The basis of anthropogenic factors are gases that create a thermal effect: carbon, methane, nitrogen oxide, nitrogen 1 oxide and chlorine-fluorine compounds. Space observations of the last 100 years show that the intensity and frequency of storms and blizzards have increased. Hot winds, hurricanes, and precipitation have intensified. At the same time, the number of flood events has also increased. If the surface of the ocean used to heat up to a depth of 1000 meters, then the warming reaches up to a depth of 2000 meters; resulting in hot currents becoming even hotter. That is, the main factor in the increase of all these natural disasters is climate change.

ENVİRONMENTAL PROTECTİON AGAİNST THE EFFECTS OF CLİMATE CHANGE THE ROLE OF GIS İN İTS FORMATİON

The article provides information about climate changes, which have become one of the global problems, and their impact on the living world, which worries the world community more and more. Unstable weather conditions are felt not only in Azerbaijan but also in several countries of the world and create problems. Increasing attention to these problems is manifested in the holding of a number of international events, including scientific and practical conferences. According to the latest assessment report of the Intergovernmental Panel on Climate Change, the average temperature on Earth has increased by 0.8 degrees in the last 100 years. The increase in temperature is mainly due to anthropogenic factors. The basis of anthropogenic factors are gases that create a thermal effect: carbon, methane, nitrogen oxide, nitrogen 1 oxide and chlorine-fluorine compounds. Space observations of the last 100 years show that the intensity and frequency of storms and blizzards have increased. Hot winds, hurricanes, and precipitation have intensified. At the same time, the number of flood events has also increased. If the surface of the ocean used to heat up to a depth of 1000 meters, then the warming reaches up to a depth of 2000 meters; resulting in hot currents becoming even hotter. That is, the main factor in the increase of all these natural disasters is climate change.

Influence of scanning speed on microstructures and mechanical properties of SLM produced Hastelloy X: As-built and solution-treated

Abstract Hastelloy X (HX) alloys with ideal strength and ductility match can be obtained by selective laser melting (SLM) and a proper follow-up heat treatment. This work studies the influence of scanning speed on grain size, grain boundary distribution, recrystallization and mechanical properties of as-built HX. These influences are reevaluated after a solution treatment at 1175℃ for 4h. The results reveal that the average grain size decreases, while the aspect ratio, texture intensity and the proportion of high-angle grain boundaries (HAGBs) increases with the increase of scanning speed. A small amount of recrystallization has occurred in the as-built alloys due to the cyclic thermal effect of SLM scanning. The finer grains and larger aspect ratio imply the higher energy storage during SLM, which will increase the recrystallizing nucleation rate. Solution treatment eliminates the fiber texture of <100>//BD, significantly increases the HAGBs fraction and recrystallization fraction, reduces the grain aspect ratio, and coarsens the grains. With the increase of scanning speed, the strength of the Hastelloy X increases and the elongation decreases. The decrease of grain size is the main reason for the increase of yield strength.

Numerical modeling of systems based on SMA wires and pulleys: A finite element formulation within the Arbitrary Lagrangian–Eulerian framework

Thanks to their properties of superelasticity and shape memory effects, SMA wires are often considered for the design of damping devices or actuators coupled to pulleys. In order to dimension such devices for commercialization, it is necessary to develop reliable, robust and fast numerical tools. To this end, simplifying the management of the wire/pulley contact using an Arbitrary Lagrangian–Eulerian (ALE) formulation is an original and effective solution. In this work, the wires are modeled by three-dimensional truss thermo-mechanical finite elements associated with a superelastic law. For each node, the curvilinear abscissa is used as an additional degree of freedom in order to deal with material flow from one element to another. After presenting the ALE formalism and the necessary precautions (advection of variables), as well as the material behavior and thermo-mechanical contact laws at the pulleys, elementary validation tests are studied. Finally, two devices taken from the literature are modeled using the ALE formalism. The results obtained demonstrate the relevance and effectiveness of the approach adopted, as well as the importance of not neglecting friction at the pulleys and thermal effects on the material mechanical response.

Dynamic modeling and analysis of viscoelastic hard-magnetic soft actuators with thermal effects

Hard-magnetic soft materials (HMSMs) are a class of magnetoactive smart polymers capable of sustaining a high residual magnetic flux density and can undergo large actuation strains under an external magnetic excitation. Due to these exceptional characteristics, soft actuators based on HMSMs hold enormous potential for remote-controlled applications. The temperature and viscoelasticity considerably influence the performance of these materials during the operation. This work aims to develop an analytical framework for modeling the dynamic behavior of a planar hard-magnetic soft actuators (HMSA) considering temperature and viscoelastic effects. The constitutive behavior of the viscoelastic HMSA is described by employing an incompressible neo-Hookean model in conjunction with a Zener rheological model and the Rayleigh dissipation function. The dynamic governing differential equations of motion are derived by utilizing the non-conservative form of the Euler–Lagrange equation. This study delves into the collective influence of temperature and viscoelastic properties on the stability, periodicity, and resonance characteristics of nonlinear vibrations exhibited by HMSM-based planar actuator subjected to dynamic magnetic loading, presenting the findings through time-history responses, Poincaré maps, and phase-plane plots. The presented results can help in the efficient and robust design of HMSM-based actuators and can also serve as an initial step toward the development of advanced actuators exposed to dynamic loading under variable temperatures for diverse applications in the fields of engineering and medicine.