Thermal Channels Research Articles

A Novel Sapphire@PiGF@Sapphire Color Converter with High Luminescence Saturation Threshold for Laser Lighting

AbstractNext‐generation high‐brightness laser lighting confronts a key challenge in preparing static color‐converting materials with remarkable luminescence saturation. Herein, a novel architecture of transmissive Y3Al5O12: Ce3+ (YAG) phosphor‐in‐glass film (PiGF) with double‐sided sapphires, i.e., a sandwich structured sapphire@PiGF@sapphire (S@PiGF@S) composite, is designed and fabricated by a thermocompression sintering technology. This kind of material can tolerate high laser power density (LPD) for the efficient double‐sided thermal channels and the high‐energy laser spot away from the PiGF emitting layer. As a consequence, the optimized S@PiGF@S color converter yields white light with a high luminous flux (LF) of 7602 lm at a record luminescence saturation threshold of 46.47 W·mm−2 benefiting from its low working temperature of merely 284 °C, which is 6.3 times that of traditional PiGF@sapphire color converter (1205 lm@10.89 W·mm−2). These findings verify that the developed S@PiGF@S color converter enables preferably optical‐thermal performances for promising applications in high‐brightness laser lighting.

Influence of casting-warm pressing process on the thermal conductivity of micro–nano-Al2O3 substrate

Alumina substrates are increasingly used for high-power integrated circuits due to their high thermal conductivity, low thermal expansion coefficient, and excellent insulation properties. However, pores in the green tape from the tape casting process reduce the thermal conductivity and permittivity of the sintered ceramic substrate. Researchers have attempted to minimize ceramic porosity with chemical additives or by sintering pure alumina at temperatures above 1650 °C, but these methods often degrade thermal conductivity or quality of substrate evenness. This study proposes a low-cost casting-warm pressing process to densify pure alumina ceramic substrates using micro–nano-mixed alumina powders and sintering at relatively low temperatures. The results indicate that the relative density of the pure alumina ceramic substrate prepared at 1500 °C is 93%, a 4.4% improvement over the tape casting process. Additionally, the thermal conductivity of the alumina substrate from the casting-warm pressing process reaches 15.89 W/(m K), which is 1.4 times higher than that of the tape casting process. Microstructure analysis shows that the casting-warm pressing process with micro- and nano-multi-scale mixed alumina powders forms a novel thermal conduction enhancement mechanism. Large particles in the green tape overlap, while small particles fill the spaces between the large particles. The connected micrometer-sized particle skeletons form high thermal conduction net channels in the substrate, improving the thermal conductivity for heat transfer.

Optimizing the thermal stability of Tb3+-based phosphor through intervalence charge transfer compensation and charge transfer band edge red-shift

Thermal quenching (TQ) limits the large-scale practical application of most luminescent materials, so the investigation on thermal quenching phenomenon of phosphors has emerged as a prominent research area, garnering significant attention in academic circles. The thermal quenching performance is closely related to the charge transfer band (CTB) and intervalence charge transfer (IVCT) band. Herein, we study the correlation between CTB edge red-shift, IVCT band position and the thermal stability of Tb3+-based lithium tantalate phosphors, aiming to regulate the thermal quenching performance. The results show that totally anomalous thermal quenching (TATQ) was found to exist in LiTaO3:xTb3+ phosphors during the process of temperature rising, and the whole CTB edge absorption showed a red-shift and enhance with increasing temperature. Based on this characteristic phenomenon, under the excitation of CTB edge (270 nm), the phosphor exhibits obvious antithermal quenching. In addition, the existence of the Tb3+-Ta5+ IVCT band can be used as a compensation channel for Tb3+ 5D3 → 5D4 transition, which makes the phosphor produce stronger antithermal quenching performance. Accordingly, the co-regulation of the CTB edge red-shift and IVCT compensation effect was proposed. Modulation of Tb3+ concentration revealed that during thermal activation (λem = 547 nm), LiTaO3:0.005Tb3+ luminescence integral intensity (423 K) reaches 255.6% of the initial intensity, phosphor achieves the most excellent performance. The maximum absolute sensitivity (Sa) and relative sensitivity (Sr) for temperature sensing scheme based on the intensity ratio of excitation spectrum CTB and CTB-IVCT reaches 0.996%@523 K and 0.927%@523 K, respectively. The co-regulation strategy of thermal activation-induced CTB edge red-shift and IVCT compensation channel provides a promising research idea for developing Tb3+-based antithermal quenching luminescent materials.

Ablative property and mechanism of pitch-based carbon fiber modified C/C composites with high thermal conductivity

The novel C/C composites with thermal transport function were prepared using the mesophase-pitch carbon fibers (CFMP) as the thermal diffusion channels. The introduction of CFMP greatly improved the microstructure, thermal properties, and ablative resistance of the C/C composites. During the graphitization process, compared with PAN fibers (CFPAN), CFMP was more likely to be graphitized to form a highly ordered three-dimensional graphite structure. The highly organized microcrystalline structure of CFMP resulted in a tight interface with PyC that lessened the likelihood of flaws and cracks during graphitization. CFMP, which acted as a thermal conduction skeleton, significantly improved the thermal conductivity of C/C composites. After 3000 °C HTT, the thermal conductivity of C/C-3000-Z composites was increased to 51.70 and 225.02 W/(m K) in the XY and Z planes, respectively. During the ablation process, C/C-3000-Z specimen exhibited a lower temperature gradient and less thermal stress owing to the outstanding thermal properties and fewer defects. After 30 s ablation, the temperature difference of surface and backside was only 495.9 °C, and the mass and linear ablation rates were 0.3 μm/s and 0.9 mg/s, respectively.

Thermal regime of peatlands in Western Siberia near the southern border of the permafrost

Relevance. The permafrost degradation under the effect of global warming. It determines the necessity for a predictive assessment of permafrost stability to minimize disturbances to engineering installations in the permafrost zone. Aim. To assess the stability of frozen peatlands in the southern part of the zone of insular distribution of permafrost. Objects. Soils of flat-mound and high-mound palsa mires, which preserve permafrost on the southern border of the insular permafrost zone. Methods. Measurements of the temperature of peat and mineral soil in geocryological boreholes from 0 to 10 m deep using the SAM-N automatic monitoring surveillance network; determination of surface temperature from thermal channels of MODIS satellite images from 2000 to 2022; analysis of meteorological indices and determination of air temperature trends for predictive assessment of permafrost stability; calculation of indicator values of permafrost state, such as freezing degree-days and thawing degree-days, frost index, freezing and thawing N-factors. Results. Numerous features of unstable permafrost have been observed. In particular, the mean annual temperature of the surface layer was positive in all studied boreholes (+0.8...+1.3°C), and the temperature at the depth of zero amplitudes (10 m) is close to the melting point (with the predominance of temperatures in the range of –0.2...–0.3°C). Besides, a layer of soil that does not freeze throughout the year (non-merging permafrost) was identified. The thawing degree-days and frost number values correspond to areas with unfrozen soils. Positive trends in air temperature, Earth's surface temperature, and snow depth were observed. For 2000–2022, surface air temperature increased by 0.76°C/10 years on average. The land surface temperature increased in summer by an average of 0.42°C/10 years. If the positive trend in surface air temperatures continues, frozen peatlands in the southern part of the permafrost zone will completely melt in 50–70 years.

Covalent and non‐covalent action‐enhanced cellulose‐based thermally conductive composite (TCC) films fabricated via vacuum‐assisted self assembly with high thermally conductivity and superior mechanical performance

AbstractAs is known, to establish covalent or non‐covalent interaction between filler and matrix, which helps to reduce the interface thermal resistance (ITR) as well as construct good thermal conduction channels, is a good strategy for dealing with the risk of thermal runaway in the extreme service environment of electronic equipment. In this paper, carboxylated nanocellulose fiber (c‐CNF) was used as matrix, and a hybrid filler (M‐CoNPs@GNP) was fabricated by coating cobalt‐nanoparticles (CoNPs) and grafting maleimide on graphene nanosheets (GNPs). M‐CoNPs@GNP/c‐CNF thermally conductive composite (TCC) films were successfully fabricated by combining with c‐CNF. As zero‐dimensional particles, CoNPs can effectively prevent GNPs agglomeration due to surface effects, and “‐NH” in maleimide dehydrates with “‐COOH” in c‐CNF to form “C‐N‐C” covalent bonds, with strong hydrogen bond formed between filler and matrix, which remarkably enhances the interface compatibility between matrix and filler. The ITR has been reduced to form a well‐defined three‐dimensional thermal conduction path, achieving an ultra‐high in‐plane TC (35.9 W·m−1·K−1) for MCGC40, which is 7.9 times that of pure c‐CNF film, in addition to a sufficiently high tensile strength of 123.3 MPa. The combination of high in‐plane TC, excellent mechanical flexibility and good electrical insulation jointly justifies the potential application of M‐CoNPs@GNP/c‐CNF TCC films in effective thermal management of flexible electronic products.Highlights CoNPs effectively inhibit GNPs agglomeration. GNPs exhibit hydrophilicity after modification. Modified fillers interact fairly well with the matrix. High tensile strength and exceptional flexibility are achieved. TCC films exhibit both electrical insulation and hydrophobicity.

New strategy for fusion infiltration processed Cu/MoCu/Cu composites

Existing thermal management materials suffer from high thermal resistance, low strength and many interfacial defects. To solve these problems, in this study, Cu/Mo70Cu30/Cu (or CPC) composite was prepared by using fusion infiltration technology with Cu wrapped Mo (Cu@Mo) composite powder as the raw material, and CPC samples with a thickness of 1.8 mm and three layer thickness ratio of 1:4:1 were further processed using a jacket rolling process. Results showed that using the Cu@Mo composite powders and following melting and infiltration processes not only changed the interfacial homogeneous structures of composites from mechanical bonding to metallurgical bonding, but also created good thermal conductivity channels of Cu in the MoCu core structure. The large rolling rate of plastic deformation created a 0.7 μm wide transition zone at the Cu/MoCu interface, resulting in efficient heat and stress transfer between two phases of molybdenum and copper. The composites showed a high densification rate larger than 98 %, a thermal conductivity of 270.8 W/(m·K), a coefficient of thermal expansion of 7.96 × 10−6/K at 30 °C, and a tensile strength of up to 542.5 MPa.

Light-Induced Electron Transfer in a [NiFe] Hydrogenase Opens a Photochemical Shortcut for Catalytic Dihydrogen Cleavage.

[NiFe] hydrogenases catalyze the reversible cleavage of molecular hydrogen into protons and electrons. Here, we have studied the impact of temperature and illumination on an oxygen-tolerant and thermostable [NiFe] hydrogenase by IR and EPR spectroscopy. Equilibrium mixtures of two catalytic [NiFe] states, Nia-C and Nia-SR'', were found to drastically change with temperature, indicating a thermal exchange of electrons between the [NiFe] active site and iron-sulfur clusters of the enzyme. In addition, IR and EPR experiments performed under illumination revealed an unusual photochemical response of the enzyme. Nia-SR'', a fully reduced hydride intermediate of the catalytic cycle, was found to be reversibly photoconverted into another catalytic state, Nia-L. In contrast to the well-known photolysis of the more oxidized hydride intermediate Nia-C, photoconversion of Nia-SR'' into Nia-L is an active-site redox reaction that involves light-driven electron transfer towards the enzyme's iron-sulfur clusters. Omitting the ground-state intermediate Nia-C, this direct interconversion of these two states represents a potential photochemical shortcut of the catalytic cycle that integrates multiple redox sites of the enzyme. In total, our findings reveal the non-local redistribution of electrons via thermal and photochemical reaction channels and the potential of accelerating or controlling [NiFe] hydrogenases by light.

Observation and analysis of positive leader re-illumination in a 10 m ultra-high voltage transmission line gap under switching impulse voltages

The leader propagation is one of the most important stages in long air gap discharge. The mechanism behind leader re-illumination remains unclear. In high humidity conditions (20.0–30.1 g/m³), we have conducted experiments of long sparks in a 10 m ultra-high voltage (UHV) transmission line gap under switching impulse voltages. The positive leaders predominantly propagate discontinuously, with almost no significantly continuous propagation occurring. The leader channels are intensely luminous and each elongation segment is straight, with streamers resembling the “branch type” which differs from the “diffuse type” streamers at the front of continuous propagation leaders. The distribution of the propagation velocities is highly random (3.7–18.4 cm/μs), and the average velocity (9.2 cm/μs) significantly exceeds that of continuous propagation (1.5–2.0 cm/μs). Analysis suggests that the current-velocity models suitable for continuous leader propagation do not align well with the experimental data in re-illumination mode. Based on the discharge current waveforms and optical images, it is speculated that the newly elongated leader in re-illumination mode does not evolve gradually from the stem (about 1 cm) but rather evolves overall from a thermal channel much longer than stem.

Metrological non-classical correlations and quantum coherence in hybrid (1/2,1) system under decoherence channels

Abstract Our research focuses on the interplay between thermal noise and decoherence channels on quantum coherence and nonclassical correlations in a hybrid ( 1 / 2 , 1 ) Heisenberg model. This hybrid system integrates the Dzyaloshinsky–Moriya interaction (DMI) and operates under the influence of an external magnetic field. We use local quantum Fisher information (LQFI) for correlation estimation and relative entropy of coherence for coherence measurement in the considered system. Our investigation encompasses various parameters of the hybrid system, the strength of the DMI and the intensity of the external magnetic field. Our findings underscore that elevated temperature compromises both nonclassical correlations and coherence. On the other hand, the robustness of the DMI mitigates the impact of thermal noise on quantum Fisher information correlations and relative entropy of coherence in the hybrid system. Additionally, we inspect the impact of decohering channels-specifically, dephasing, phase flip, and bit- and trit-flip channels-on thermal coherence and quantum correlations. The introduction of various decoherence processes into the hybrid qubit-qutrit system leads to a competition with thermal fluctuations, thereby giving rise to out-of-equilibrium states. Our results indicate that as the decoherence strength parameter (p) increases, both LQFI and relative entropy of coherence exhibit similar behaviors in the dephasing and phase flip channels. These resources gradually diminish, eventually disappearing entirely at p = 1. In the context of the bit- and trit-flip channels, quantum coherence displays notable distinctions compared to what is observed under dephasing and phase flip channels, revealing that coherence can be preserved if the DMI is strong and the intensity of the external magnetic field is reduced. These findings are important since it is crucial to first understand the decoherence process, arising from the interaction with the environment, and then to find ways to hinder this decoherence in order to avoid the complete loss of the quantum resources necessary to quantum information processing.

Regulation of thermal migration channel in cellulose hydrogel to enhance thermopower

Ionic thermoelectric material is gaining increasing attention, and many attempts have been devoted to obtain huge ionic thermopower, which remains a big challenge. Herein, the idea of “ion thermal migration channel” was propose, and a high ionic thermopower was achieved by regulating the thermal migration channel in cellulose hydrogel system. It is found that the channels size as well as the channel-ion interaction played dominant roles. Initially, the channel size in cellulose/KCl hydrogel were optimized to enlarge the channel-Cl− interactions via counter-ion condensation effect, which improved the thermopower from 2.45 mV·K−1 to 8.13 mV·K−1. Then, sodium alginate as polyanion was doped and multi-valance ion cross-linking was carried out, to further enhance the channel-Cl− interaction, and a high thermopower of 22.09 mV·K−1 was realized. In addition, the cellulose based ionic thermoelectric hydrogel displayed viable basis for energy harvesting and temperature sensing as wearable flexible devices. The present work not only provides a systematic strategy for the thermopower regulation, but also supplies an applicable approach for the preparation of sustainable thermoelectric materials with biomass resources, demonstrating great potential in sustainability and green energy.

Effects of temperature-dependent viscosity on thermal drawdown-induced fracture flow channeling in enhanced geothermal systems

Harnessing geothermal energy from an enhanced geothermal system (EGS) highly depends on fracture flow and heat transport processes. Thermal drawdown-induced thermal stress has been characterized as a major reason for severe fracture flow channeling (short-circuiting), which further leads to premature thermal breakthrough and impairs long-term thermal performance. In the present study, we quantitatively analyzed a potential flow channeling mitigation mechanism, i.e., the increase of water viscosity with temperature reduction. Through a field-scale single-fracture EGS model that incorporates thermal-hydro-mechanical coupled processes and temperature-dependent water viscosity, we demonstrate that the increase of water viscosity during heat extraction promotes a dispersed fracture flow pattern, which can effectively mitigate thermal drawdown-induced flow channeling and improve long-term thermal performance. The mitigation effect is more noticeable for homogeneous aperture scenarios than for heterogeneous aperture scenarios, especially in the early period of heat production. With a higher in-situ stress and smaller rock Young's modulus, the flow channeling effect of thermal stress becomes weak, and therefore the temperature-dependent viscosity exhibits a more significant flow channeling mitigation effect. The results from the current study provide valuable insights into the optimization of fracture flow and heat transport to achieve more efficient and sustainable energy production from EGSs.

Structural features and electrical properties of si(al) thermal migration channels for high-voltage photovoltaic converters

The results of a study of the structural features and electrical properties of Si(Al) through thermomigration p-channels in a silicon wafer are presented. Structural studies were performed using X-ray methods of projection topography, diffraction reflection curves and scanning electron microscopy. It is shown that the channel-matrix interface is coherent without the formation of mismatch dislocations. The possibility of using an array of thermomigration p-channels of 15 elements to form a monolithic photovoltaic solar module in a Si(111) silicon wafer based on p-channels with a width of 100 microns with walls in the plane is shown. The monolithic solar module has a conversion efficiency of 13.1%, an idle voltage of 8.5 V and a short-circuit current density of 33 mA/cm².

Using the space-time evolution spectrum to investigate the transmission characteristics of lightning return stroke current

Exploring the physical characteristics of lightning discharge channels based on spectrum can help to reveal the microscopic mechanism of the discharge process and provide a theoretical basis for lightning protection research. According to the spectra of six cloud-to-ground lightning return stroke processes and plasma conduction theory, we investigated the evolution of the total intensity of ionic and atomic lines in the spectra, conductivity, and other parameters along the discharge channel at different stages of the return stroke. The results show that the intensity of ionic lines in the spectrum present an obvious decaying trend with increasing height along the channel during the initial current-rise phase of the return stroke. In the later stages, the decay of ionic line intensity along the channel height slowed down. The intensity of the atomic lines varied slightly with increasing height along the channel during the entire return stroke process. The different space-time evolution characteristics of the spectral line intensity with different excitation energies reflect the differences in the mechanism of light radiation in the core current-carrying and surrounding thermal channels. The spectral characteristics further confirm that the ionic line with higher excitation energy directly relates to the physical process in the core current-carrying channel, and its intensity can roughly reflect the change in current along the channel. The attenuation of the return stroke current along the channel was mainly manifested in the initial stage of the return stroke. The decay rate of conductivity along the channel height is slower than that of the ionic line intensity throughout the return stroke stage, which is related to the channel diameter, it is another key parameter affecting the current transmission in the discharge channel.

Experimental Validation of Enhanced Information Capacity by Quantum Switch in Accordance with Thermodynamic Laws.

We experimentally probe the interplay of the quantum switch with the laws of thermodynamics. The quantum switch places two channels in a superposition of orders and may be applied to thermalizing channels. Quantum-switching thermal channels has been shown to give apparent violations of the second law. Central to these apparent violations is how quantum switching channels can increase the capacity to communicate information. We experimentally show this increase and how it is consistent with the laws of thermodynamics, demonstrating how thermodynamic resources are consumed. We use a nuclear magnetic resonance approach with coherently controlled interactions of nuclear spin qubits. We verify an analytical upper bound on the increase in capacity for channels that preserve energy and thermal states, and demonstrate that the bound can be exceeded for an energy-altering channel. We show that the switch can be used to take a thermal state to a state that is not thermal, while consuming free energy associated with the coherence of a control system. The results show how the switch can be incorporated into quantum thermodynamics experiments as an additional resource.

Face Anti-Spoofing Detection with Multi-Modal CNN Enhanced by ResNet

The growing prevalence of face recognition technology in various applications, including mobile devices, access control, and financial transactions, highlights its importance. However, the vulnerability of face recognition systems to attacks has been demonstrated, underscoring the necessity of addressing potential weaknesses that attackers may exploit. The paper delves into face presentation attack detection (PAD) within biometric systems, which is crucial for ensuring the reliability and security of face recognition algorithms. To address this issue, the paper proposes a method for face presentation attack detection using ResNet-50 in conjunction with multi-modal data, incorporating RGB, depth, infrared (IR), and thermal channels. The method explores diverse strategies to combine results from each modality, investigating various fusion techniques such as majority voting, weighted voting, average pooling, and a stacking classifier. The system has been tested on the WMCA dataset. It exhibits strong performance compared to existing methods, notably achieving an impressive ACER ratio of 0.087% with the stacking classifier. This approach proves effective by consolidating multiple modalities without requiring individual scenario-specific models, indicating promise for real-world applications

Phonon Engineering in Solid Polymer Electrolyte toward High Safety for Solid-State Lithium Batteries.

Extensively-used rechargeable lithium-ion batteries (LIBs) face challenges in achieving high safety and long cycle life. To address such challenges, ultrathin solid polymer electrolyte (SPE) is fabricated with reduced phonon scattering by depositing the composites of ionic-liquid (1-ethyl-3-methylimidazolium dicyamide, EMIM:DCA), polyurethane (PU) and lithium salt on the polyethylene separator. The robust and flexible separator matrix not only reduces the electrolyte thickness and improves the mobility of Li+, but more importantly provides a relatively regular thermal diffusion channel for SPE and reduces the external phonon scattering. Moreover, the introduction of EMIM:DCA successfully breaks the random intermolecular attraction of the PU polymer chain and significantly decreases phonon scattering to enhance the internal thermal conductivity of the polymer. Thus, the thermal conductivity of the as-obtained SPE increases by approximately six times, and the thermal runaway (TR) of the battery is effectively inhibited. This work demonstrates that optimizing thermal safety of the battery by phonon engineering sheds a new light on the design principle for high-safety Li-ion batteries.

An optimizing study of silicon-based microchannels for enhanced thermal transfer

The thermal transport efficiency of microchannel heat sinks is critically influenced by the solid-liquid interface thermal resistance, an aspect that has historically been underappreciated in the design of these systems. We introduce a hybrid model that combines molecular dynamics simulations with computational fluid dynamics to rigorously investigate the interfacial heat transfer characteristics of microchannels. Our methodology involves constructing a nanochannel composed of silicon atoms and water molecules to accurately measure the thermal resistance at the Si–H2O interface. We then extend our analysis by developing two-dimensional rectangular microchannel models. These models are utilized to examine the effects of thermal resistance, channel dimensions, and inlet velocity on the overall interfacial heat transfer rate. Our findings indicate a pronounced size dependency in the variation of the total heat transfer rate, highlighting the critical role of scale in these systems. Significantly, enhancements in heat transfer efficiency are observed with an increase in inlet velocity and a reduction in thermal resistance. These results underscore the importance of optimizing both physical and operational parameters to enhance the efficiency of microchannel heat sinks. The findings are expected to inform future designs and promote more efficient thermal management solutions in various applications.

A wood-inspired epoxy-based electronic packaging material with vertically aligned thermally conductive channels for electromagnetic waves absorption and thermal management

Multifunctional materials integrating electromagnetic waves absorption (EMA) and heat conductivity functions are urgently desirable to tackle the heat emission and electromagnetic interference issues of advanced electronics. However, simultaneously mustering these features into one material remains a formidable challenge as the incompatibility between high thermal conductivity and excellent EMA performance. Herein, inspired by the water transport process of trees in nature, an epoxy-based electronic packaging material (CFS/EB) with vertical thermal conduction channels is fabricated by encapsulating high thermal conductivity boron nitride/epoxy hybrids into aerogel skeleton with good electromagnetic features. This ingenious design not only can defuse the issue of difficult coexistence of outstanding EMA and thermal conduction performance, but also delivers high through-plane thermal conductivity arised from vertical aligned channels. The resulting CFS/EB composite exhibits strong EMA performance with minimum reflection loss value of −59.2 dB and broad effective absorption bandwidth of 5.82 GHz. Synchronously, the composite also holds the high through-plane thermal conductivity of 1.51 W m−1 K−1 (655 % higher than pure epoxy resin) at low filler loading of 13.15 wt% as well as electrical insulation of 1.43 × 1012 Ω·cm. Such a superior comprehensive performance endows CFS/EB composite a great application prospects in electronic packaging fields, whilst the orientation structure design triggered by this bioinspired strategy offer facile yet feasible alternatives to address heat accumulation and electromagnetic interference problems for integrated electronics.

Integrating high-efficiency thermal channel construction and structural wave absorption design within vertically oriented SiC-coated carbon fibers/silicone resin composites

To match the increasing miniaturization and integration of electronic devices, higher requirements are put forward for the electromagnetic wave absorption (EWA) and thermal conductivity (Tc) of heat conduction-microwave absorption integrated materials (HCMWAIMs) to overcome the problems of electromagnetic wave (EMW) pollution and heat accumulation. Herein, a simple and efficient shear force induction technique is used to construct a carbon/magnetic isolation network within the silicone resin matrix, where ferrite particles are well dispersed in vertically oriented SiC-coated carbon fibers array. Benefiting from the orderly interconnection of CFs@SiC in the array, the prepared composites have a high Tc of 7.86 W m−1 K−1. The introduction of magnetic ferrite particles within the CFs@SiC array can induce electrical-magnetic coupling, optimize impedance matching, and enhance EMW attenuation. This synergy of V-CFs@SiC/ferrite isolation network structure gives the composites an excellent effective absorption bandwidth (EAB) of 5.88 GHz and a minimal reflection loss (RLmin) of −47.5 dB at a thickness of 1.5 mm. Moreover, the as-prepared composites exhibit outstanding elastic compressibility of 43.2 % and rebound rate of 45.1 % under a pressure of 35psi. This strategy offers a distinguishing understanding of preparing high-performance HCMWAIMs in modern electronic devices.