Textile Materials Research Articles

Studying the quality indicators of acrylic paints with suede effect decorated in youth clothing

The article provides a comparative analysis of the types of national patterns in the formation and decoration of modern youth clothing. In the preparation of modern youth clothing, the structure and use of “tórt qulaq,” “qus qanaty,” and “óńirjıek” ornaments among the national ornaments of the Kazakh people were substantiated. According to the analysis results, the study used the methods of artistic decoration of national elements with volumetric acrylic paints, decorating with an artistic painting of ornaments of a collection of modern youth clothing formed. We studied the influence of dyeing textile materials of mixed composition with acrylic paints and the quality indicators of test samples decoratively decorated with acrylic paints on textile materials. When decoratively finishing brushed “poker with fleece” fabric with “Decola” acrylic paint, applying the paint to the test sample created difficulties. As a result, we discovered that the paint did not lie smoothly on the fabric’s surface. Test samples of the “milana” suit fabric and raincoat material using “Pebeo acrylic paint with suede effect” acquired a 3D volume. We studied the color fastness of washing test samples, and high-quality indicators of color fastness with artistic ornamental finishing in 3D volumes were obtained for the material “raincoat” and the suiting fabric “milana.” When studying the performance of test samples in terms of hygroscopic properties, the raincoat material had a higher waterproof rating, and the “milana” suit fabric had a lower waterproof rating. As a result of the hygroscopic properties of materials, in the manufacture of a collection of youth clothing, “milana” suit fabric was used, and the decorative detail of the “back yoke” was made of raincoat material with a high waterproof rating. As a result of the study, the ornaments will be decorated with artistic painting with “Pebeo acrylic paint suede effect” with 3D volume and made of “rain-coat” material and suiting fabric “milana” to create a collection of modern youth clothing. The artistic and decorative design of the clothing collection with 3D volumetric ornaments was formed, and modern clothing models that meet the tastes of youth, fashion trends, and market requirements were developed.

Safety research of textile materials with flame retardant properties

This article discusses the findings of a study that explored the use of new compositions containing tetraethoxysilane, sodium dihydrogen phosphate, and hexamethylenediamine to improve the flame retardancy of cellulose fiber materials. The impact of different components and temperatures on the fire-resistant properties of the fabric was examined. In an untreated sample measuring 17*22 cm, ignition occurred in 15 seconds and the fabric burned completely within 60 seconds, whereas a treated sample showed signs of retardation. Increasing the concentration of flame retardant impregnation at a temperature of 150 degrees had minimal effects on the material's strength, air permeability, and appearance. With the help of electron scanning device it was found that on the surface of the fibers of the treated sample morphological changes were observed in the form of film, which in turn contain particles of Si (25.48%), P (17.61%), Na (1.70%). The optimum conditions of fabric processing are determined, the influence of concentration of working solution, impregnation and thermofixation temperature on flame retardant properties of fabrics investigated, also processing can be carried out on standard equipment of finishing enterprises and laboratories. Cotton materials treated with a compound based on tetraethoxysilane, sodium dihydrophosphate and hexamethylenediamine provides adequate fire resistance.

Research of viscoelastic and hygroscopic properties of adhesive, textile materials and packages based on them

Materials with multifunctional properties are the future of modern clothing, and the creation of such materials is extremely urgent. When creating such materials, it is appropriate to use non-woven nano-modified materials as components of clothing details. At the same time, it is important to ensure the viscoelastic and hygroscopic properties of packages of materials for making clothes. This study presents the analysis of these important properties of tissue packages depending on the parameters of their duplication.

A Novel Method for Increasing Phase‐Change Microcapsules in Nanofiber Textile through Electrospinning

AbstractPhase‐change textiles can achieve temperature regulation in variable ambient environments, however, augmenting the amounts of phase‐change materials (PCMs) in textiles remains a significant challenge due to the occurrence of leakage with higher amounts. Herein, a novel approach is proposed for the fabrication of a hierarchical nanofiber textile embedded with a substantial quantity of phase‐change microcapsules (PCMC) using electrospinning. Such nanofiber textile is composed of a polyvinylidene fluoride‐hexafluoropropylene fibers (PVDF‐HFP) layer and a polyvinyl butyral fibers doped with 60 wt% of PCMC (PVB/PCMC‐60) layer. Gratifyingly, doped PCMC shows no signs of rupture and exhibits excellent cycling stability. Furthermore, the incorporation of the PCMC does not affect the spectral characteristics of the PVDF‐HFP layer while providing a substantial enthalpy of fusion (92.6 J g−1) to the PVB/PCMC‐60 layer. This serves to compensate for the deficiency in radiative cooling capacity and effectively mitigates temperature fluctuations and overheating of the textile. Outdoor test results indicate that the nanofiber textile can achieve temperature drops of 3.7 and 14.8 °C compared to textile without the PCMC (namely PVDF‐HFP/PVB) and cotton, and attains a subambient temperature drop of 6.5 °C. Additionally, the nanofiber textile exhibits desirable mechanical strength, flexibility, washability, breathability, moisture permeability, and sun protection.

Recent Advances in Wearable Textile-Based Triboelectric Nanogenerators.

We review recent results on textile triboelectric nanogenerators (T-TENGs), which function both as harvesters of mechanical energy and self-powered motion sensors. T-TENGs can be flexible, breathable, and lightweight. With a combination of traditional and novel manufacturing methods, including nanofibers, T-TENGs can deliver promising power output. We review the evolution of T-TENG device structures based on various textile material configurations and fabrication methods, along with demonstrations of self-powered systems. We also provide a detailed analysis of different textile materials and approaches used to enhance output. Additionally, we discuss integration capabilities with supercapacitors and potential applications across various fields such as health monitoring, human activity monitoring, human-machine interaction applications, etc. This review concludes by addressing the challenges and key research questions that remain for developing viable T-TENG technology.

Stiffness in compression therapy: Analytical estimation of pressure changes beneath textile compression devices

Compression pressure changes in dynamic conditions under textile compression devices have a critical impact on the success of compression therapy. Models exist to predict the level of compression pressure, but not the actual change in pressure. This paper aims to derive a formula to accurately determine the pressure change under textile compression devices, to investigate the factors influencing the pressure change and to verify their effects through theoretical analysis. Firstly, a formula based on Laplace’s law is presented which mathematically describes the dependencies of pressure changes. Secondly, a simulation is carried out to demonstrate the effect of these dependencies on pressure changes using theoretical textile curve functions. Finally, the effect of these dependencies is demonstrated by testing short- and long-stretch bandages in a tensile testing machine and using the recorded material curves to simulate a theoretical application of these bandages to the lower limbs. The results show that the change in pressure is not solely determined by the intrinsic properties of the material, but is influenced by several variables, including the mechanical performance of the textile materials during stretching, the target pressures for application of the textile material, and the body geometries to which the material is applied. Pressure change cannot be a constant for textile compression devices such as bandages. The research increases the understanding of the factors that influence pressure changes in compression device materials. The findings may have implications for the design and selection of compression textiles in clinical applications.

INVESTIGATION OF THE ENZYMATIC DEGUMMING AND STEAM EXPLOSION’S IMPACT ON THE CHEMICAL AND BIOLOGICAL PROPERTIES OF THE NATURAL FIBERS

Today the textile production is considered as one of the most polluted fields across the world. And the size of the global textile market is expected to be increased by 26% in 2030. The high demand for clothing has necessitated the search for sustainable alternatives to mitigate the environmental impact. One such alternative being studied is the utilizing natural fibers instead of synthetic fibers due to their promising properties. The major benefits of using natural fibers at industrial skills are sustainability, biodegradability, eco-friendliness and lightweight. Utilizing the natural fibers such as flax, hemp, jute, nettle can decrease the waste release. For the use of natural plant fibers as textile materials, the degumming process, also known as retting, must be performed in order to make fiber bundles become more separable from the wood’s part of the stem. Methods of fiber degumming have been divided into four categories: physical, enzymatic, chemical and biological. The suggestion of the use of steam explosion and enzymatic retting as eco-friendly methods that can reduce fiber damage without influencing on cellulosic structure are proposed. To determine and increase the effect of the degumming on the natural fibers, the flax, hemp fibers were taken as samples to perform the enzymatic degumming following the steam explosion method. For the enzymatic activity, pectate lyase (Bioprep100L, Novozymes) was used. As a chelator to remove Ca+ ions from the fibers, EDTA (Ethylenediaminetetraacetic acid) was proposed to utilize during the enzymatic retting to improve mechanical properties of the fibers. Three groups were observed to investigate the effects of enzymatic retting on natural fibers: the control group (utilizing water only), the second group using pectate lyase enzyme with water, and the third group employing a pectate lyase enzyme buffered solution with EDTA as a chelator. After enzymatic degumming, the obtained biomass from three groups were got through the steam explosion at 200 °C for 4 min. As a result, according to chemical analysis of sugar content using HPAE-PAD ion chromatography, it was revealed that the second group that is used only the pectate lyase and water following the steam explosion method showed the best result in comparison with the other groups. It was determined that the percentage of rhamnose and arabinan sugars, which represent the pectin content significantly decreased that cause a partial or a full elimination of pectin (≈ 0,05% for flax and ≈ 0 % for hemp), while the glucose content slightly increased (≈ 94,67% and ≈ 94,74%, respectively) meaning that cellulose was not damaged during the retting methods. It can also be suggested that the group with EDTA chelator did not lead to successful results due to its influence on pectate lyase, causing the inactivation of enzyme. Although the obtained results, demonstrating the efficient retting outcomes with pectate lyase that that can be used at industrial scale for the further processes of textile production, the additional analyses on mechanical properties, including determination of tensile strength, elongation must be performed.

Development of bio-active cotton fabric coated with betalain extract as encapsulating agent for active packaging textiles

The development of bio-active cotton fabric based on natural polymers and pigments has been a significant material for biodegradable textile packaging in recent years. Betalain extracted (BE) from Red beet root (RBR) is a rich source of natural pigments and has potential health benefits as an antioxidant and in biological activities which used as food, beverage, and drug colorant. However, BE pigments are photochromically unstable and have interest applications, thereby motivating the use of microencapsulation technology to maintain their stability and increase their shelf lifetime. Thus, in the present work Incorporating BE into gelatinized corn starch (GS) and Arabic gum (AG) for manufacturing stabilized BE microcapsules with tunable antioxidant and biological properties by freeze-drying method. The produced encapsulating agent (EA) powders were analyzed by scanning electron microscope (SEM) for particle morphology and FTIR of selected EA was carried out. Monitoring of coloring strength values (K/S) and Color parameters before and after storage as well as storage stability of these microcapsules at different pH’s was also studied. The current study was performed to design multifunctional cotton fabric, for this purpose the cotton fabric was treated with keratin to improve its affinity toward 100 % BE, with and without (BE) EA were determined using a pad dry process. The chemical properties, physical properties, mechanical properties, thermal stability, and functional properties of the coated fabrics with and without (BE) as well as color parameters were determined. The results showed that the fabric coated with 100 % BE and 30 % BE incorporating or encapsulating with 60 % GS and 10 % AG exhibited good mechanical properties, excellent thermal stability, and significant antioxidant and antimicrobial activity compared to the uncoated fabric. The antioxidant release of BTE from the fabric coated with 60/10/30 EA was controlled by diffusion. According to the results, the developed multifunctional coated fabrics with BE encapsulating agent can be considered as a good potential material for active packaging textiles for various applications.

Dress as the Agency of Power: Ozioma Onuzulike’s Ceramic Art

This study examines the ceramic works of a Nigerian artist, Ozioma Onuzulike, which vividly illustrate dress as an agency of power. His oeuvre features among other things the agbada, an extra-large clothing style prevalent in contemporary Nigeria, especially in elitist socio-political and cultural contexts. Over 25 years of Onuzulike’s ceramic art practice have consistently showcased modernist works that challenged conventional ceramic art and socio-political norms. His innovative use of clay and palm kernels to depict power dynamics in Nigeria has attracted some scholarly attention. This study employs compositional interpretation and contextual analysis to explore the visual, sociocultural, and political impact of Onuzulike’s hybrid ceramic art that depicts agbada. An iconological approach reveals the formal elements, historical, political, and social nuances embedded in the works. The concept of dress of power is used to unravel the multifaceted political significance of Onuzulike’s representations. Unpacking the visual vocabulary and metaphor of power in the works provides insights into the agbada as a status symbol in modern Nigeria. This artistic representation typifies a trend in contemporary African and diasporic art, where textile materials, forms, and ideas are central.

R2R3 MYB Transcription Factor GhMYB201 Promotes Cotton Fiber Elongation via Cell Wall Loosening and Very-Long-Chain Fatty Acid Synthesis.

Cotton fiber is the leading natural textile material, and fiber elongation plays an essential role in the formation of cotton yield and quality. Although a number of components in the molecular network controlling cotton fiber elongation have been reported, a lot of players still need to be functionally dissected to understand the regulatory mechanism of fiber elongation comprehensively. In the present study, an R2R3-MYB transcription factor gene, GhMYB201, was characterized and functionally verified via CRISPR/Cas9-mediated gene editing. GhMYB201 was homologous to Arabidopsis AtMYB60, and both coding genes (GhMYB201At and GhMYB201Dt) were preferentially expressed in elongating cotton fibers. Knocking-out of GhMYB201 significantly reduced the rate and duration of fiber elongation, resulting in shorter and coarser mature fibers. It was found that GhMYB201 could bind and activate the transcription of cell wall loosening genes (GhRDLs) and also β-ketoacyl-CoA synthase genes (GhKCSs) to enhance very-long-chain fatty acid (VLCFA) levels in elongating fibers. Taken together, our data demonstrated that the transcription factor GhMYB201s plays an essential role in promoting fiber elongation via activating genes related to cell wall loosening and VLCFA biosynthesis.

Textile omnidirectional antenna for wearable WiFi-7 applications using higher order modes

In WiFi 7 (IEEE 802.11be), Multiple Input Multiple Output (MIMO) technology plays a crucial role in enhancing throughput. This combination enables numerous applications for wearable WiFi devices. For instance, WiFi can be utilized for tracking and fall detection purposes. Additionally, wearable devices used in gaming, vital signal monitoring, and tracking can benefit from the implementation of wearable MIMO antennas. Despite the demand for wearable WiFi antennas, specifically in the new 6 GHz band, a significant gap exists in the investigation of antennas that are completely made of textile, are low profile, and provide vertical polarization and omnidirectional patterns. Addressing this gap, in this paper, a wearable planar antenna is introduced, which is specifically designed to offer an omnidirectional pattern and linear polarization. To ensure its practicality and ease of use, the antenna utilizes lightweight and wearable textile material. The design details and performance of the proposed antenna are presented. The antenna covers all three bands of WiFi, namely, 2.4 GHz, 5 GHz, and 6 GHz bands. The 10-dB return loss bandwidth is 2.4 GHz–2.5 GHz, and 4.6 GHz–7.2 GHz. The maximum Specific Absorption Rate (SAR) for an input power of 500 mW is calculated at 1.053 W/Kg for a 2 mm air gap between the antenna and tissue surface. The size of the antenna is given by a circular area of π × (50 mm)2, and a thickness of 6 mm.

Phase-Change Materials in Textiles. Methods of Preparation and Research Methods

Phase-Change Materials in Textiles. Methods of Preparation and Research Methods

Flexible and wearable multilayer structure fiber sensor for motion and human physiological signal monitoring

AbstractThe development of flexible piezoresistive sensors has increasingly attracted widespread attention due to their various potential applications in wearable devices, human–machine interfaces, and health monitoring systems. Developing high‐performance sensors that can accurately monitor movement and human health monitoring is very necessary. This study uses silver nanoparticles, MXene, and polypyrrole to prepare conductive fabrics based on various fabrics through layer‐by‐layer encapsulation. Finally, conductive fabrics with different layers were encapsulated to prepare a multilayer fiber sensor. Next, the series piezoresistive performance of sensors made of different fabric materials and sensors with different layers were tested. The experimental results show that the sensor prepared has the best performance when the selected fabric material is mulberry silk and the number of layers of the fabric is five. After testing, the sensitivity of the sensor is 4.9029 at low strain and 0.7901 at high strain. Moreover, it exhibits good stability during 1600 compression‐release cycles and temperatures range from −20 to 60°C. The designed sensor performs well in motion and human physiological signal monitoring. This study provides new ideas and references for the design and research of multilayer fiber sensors.

β-Cyclodextrin-Modified Cotton Fabric for Medical and Hospital Applications with Photodynamic Antibacterial Activity Using Methylene Blue

The use of cyclodextrins in textiles for the development of biofunctional fabrics represents an interesting alternative for the advancement of dental, medical, and hospital materials. Cyclodextrins can interact with the chemical groups present in cotton fibers, leading to the formation of a nanostructured surface with specific functional properties, including antibacterial activity. Although there are numerous antibacterial textile finishes, the use of methylene blue as a cyclodextrin host molecule for photodynamic applications in textile materials remains to be investigated. This is because methylene blue is a photosensitive dye capable of generating singlet oxygen (1O2) when illuminated, which inactivates the pathogenic microorganisms that may be present in wounds. The objective of this study was to develop a biofunctionalized and photoactivatable cotton fabric with antimicrobial properties for use in the cosmetic or medical industries. The materials obtained were characterized via scanning electron microscopy (SEM), Fourier transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), the determination of cotton fabric functionalization dyeing variables, colorimetry, UV-VIS spectrophotometry, degradation of 9,10-anthracenediyl-bis(methylene)dimalonic acid (ABDA), photodegradation tests, and microbiological analysis. The results showed that the textile was functionalized with β-cyclodextrin, mainly evidenced by the appearance of the band at 1730 cm−1, indicating the formation of the ester group. Thus, when exposed to light, the non-functionalized material showed greater photobleaching, about 60%, compared to the material treated with cyclodextrin. This result was also reflected in the ABDA degradation kinetics, with the treated material showing 592.00% (first phase) and 966.20% (second phase) higher degradation than the untreated sample. Finally, the photodynamic activity was determined based on the antimicrobial properties of the textile, showing a reduction of more than 99% without exposure to light and 100% when exposed to light. It is believed that this study could open avenues for future research and the development of antimicrobial fabrics, as well as demonstrate the efficiency of the treatment with cyclodextrin in relation to photobleaching.

Natural Inhibitory Treatment of Fungi-Induced Deterioration of Carbonate and Cellulosic Ancient Monuments: Isolation, Identification and Simulation of Biogenic Deterioration.

Fungi play a significant role in the deterioration of various types of monuments. Therefore, the protection of ancient monuments from fungal attacks is an important goal that must attract the attention of researchers worldwide. A total of 69 fungal isolates were recovered from 22 deteriorated objects compromising paper, textiles, wood, and stone in the National Museum of Egyptian Civilization (NMEC) storeroom, Cairo, Egypt. The isolates were identified as 12 different species categorized into three different genera, namely, Aspergillus (9 species), Penicillium (2 species) and Trichoderma (1 species). Among them, Aspergillus fumigatus was the most prevalent species. Three essential oils were assessed for antifungal activity and compared with the antifungal effects of five synthetic microcides to identify a natural inhibitory treatment. Thyme oil and sodium azide were found to be the most active growth inhibitors, with minimum inhibitory concentrations (MICs) of 625 and 100 ppm, with inhibition zone diameters of 19.0 ± 0.70 - 23.76 ± 1.15 and 13.30 ± 0.35 - 19.66 ± 0.54 mm, respectively. An in vitro simulation of the biodeterioration process was conducted using spores of the A. fumigatus strain NMEC-PSTW.1 on model cubes made of paper, textile, wood, and stone materials. The changes in the characteristics of the artificially deteriorated materials were analyzed using environmental scanning electron microscopy/energy dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy. The results revealed changes in the morphology, physical properties, and chemical composition induced by A. fumigatus NMEC-PSTW.1. Overall, thyme oil is recommended as a natural inhibitor to protect carbonate and cellulosic monuments in NMEC against fungal attack.

The Effect of Di-Ammonium Phosphate (DAP) towards Flammability Properties of Polyester-Cotton Military Fabrics

Polyester-cotton fabric is one of the most common materials used in military fabrics. The study of the suitable fabric material is critical because military personnel must prepare themselves from inevitable events such as heat exposure. Therefore, the purpose of this study was to examine the flammability features of various cotton compositions in polyester-cotton military textiles with and without the presence of Di-ammonium Phosphate (DAP). We performed a full flammability test, including a cone calorimeter test and a limited oxygen index (LOI) test on three distinct types of polyester-cotton textiles treated with 10% di-ammonium phosphate (DAP). The result shows that, the higher the percentage of cotton, the lower the fire-retardant properties. Besides that, this study also found that the di-ammonium phosphate (DAP) improves the flammable properties of the military fabric.

Formulation and evaluation of herbal wet wipes using non-woven fabrics

Herbal wet wipes are a viable substitute for conventional wipes, tackling worries regarding chemical composition and ecological effects while offering advantages for skin health. This research uses non-woven fabric as the substrate and focuses on the formulation and assessment of herbal wet wipes. Selected plant extracts or essential oils with antibacterial and skin-soothing qualities are incorporated into the recipe. Testing the herbal wet wipes' antimicrobial activity against common skin bacteria and fungus allows for an evaluation of their effectiveness. Testing for skin sensitivity is done to determine safety and suitability for different skin types. To guarantee product integrity under various storage circumstances, stability testing is carried out by incorporating extracts of Azadirachta indica (Neem), Aloe barbadensis, Tulsi, and Clove Extract. Thus, the final cloth will include qualities like softness, antimicrobial, and anti-allergy for adults and infants. The intended application of the fabric material is to improve skin health through the use of wet wipes.

Effect of natural agents on the mechanical and flame retardant properties of cotton fabrics – finishing technique

The current study carefully examines the antibacterial finished cotton fabric materials in terms of enhanced flame-retardant capability by eco-friendly herbal extracts to cotton fabrics while concurrently analysing their tensile strength qualities. Because active compounds have been incorporated into the fabric’s structure, the treated fabrics’ tensile strength has changed less over time than untreated fabrics. The plain weave cotton fabric with a specification of 140 g/m2 and a 15% finished concentration had a tensile strength of 238.92 kg/cm2, while cotton fabrics with specifications of 240 g/m2, terry weave with a 15% finished concentration, had a tensile strength of 294.43 kg/cm2. The finishing process has betterment in comparison to the untreated cotton fabrics had tensile strengths of of 140 g/m2 plain and 240 g/m2 terry weaves fabric which has 238.38 kg/cm2 and 288.47 kg/cm2, indicating that the ashwagandha-finished cotton fabrics performed better. The burning period increases from 35 sec for untreated 140 g/m2 plain cotton fabric, according to the flame reaction studies. According to tests on flame reaction, fabrics treated with a combination of banana peels and casein have a burning time rise from 35 s for untreated 140 g/m2 plain cotton fabric to 100 s, and up to 60 s for Ashwaganda and Ginger completed fabrics. The findings of the Limited Oxygen Index (LOI) test revealed that the completed fabrics made from a mixture of banana peels and casein had significantly higher LOI values of 23 than the other treated samples, which had an average LOI of 19 and 20, compared to the untreated cotton fabrics’ LOI of 18.

Self-Cooling Textiles—Substrate Independent Energy-Free Method Using Radiative Cooling Technology

Due to climate change, population increase, and the urban heat island effect (UHI), the demand for cooling energy, especially in urban areas, has increased and will further increase in the future. Technologies such as radiative cooling offer a sustainable and energy-free solution by using the wavelength ranges of the atmosphere that are transparent to electromagnetic radiation, the so-called atmospheric window (8–13 µm), to emit thermal radiation into the colder (3 K) outer space. Previous publications in the field of textile building cooling have focused on specific fiber structures and textile substrate materials as well as complex multi-layer constructions, which restrict the use for highly scaled outdoor applications. This paper describes the development of a novel substrate-independent coating with spectrally selective radiative properties. By adapting the coating parameters and combining low-emitting and solar-reflective particles, along with a matrix material emitting strongly in the mid-infrared range (MIR), substrate-independent cooling below ambient temperature is achieved. Moreover, the coating is designed to be easily applicable, with a low thickness, to ensure high flexibility and scalability, making it suitable for various applications such as membrane architecture, textile roofs, or tent construction. The results show a median daytime temperature reduction (7 a.m.–7 p.m.) of 2 °C below ambient temperature on a hot summer day.

Recent Advances in Utilizing Lignocellulosic Biomass Materials as Adsorbents for Textile Dye Removal: A Comprehensive Review.

This review embarks on a comprehensive journey, exploring the application of lignocellulosic biomass materials as highly effective adsorbents for the removal of textile dyes (cationic and anionic dyes) from wastewater. A literature review and analysis were conducted to identify existing gaps in previous research on the use of lignocellulosic biomass for dye removal. This study investigates the factors and challenges associated with dye removal methods and signifies their uses. The study delves into the pivotal role of several parameters influencing adsorption, such as contact time, pH, concentration, and temperature. It then critically examines the adsorption isotherms, unveiling the equilibrium relationship between adsorbent and dye and shedding light on the mechanisms of their interaction. The adsorption process kinetics are thoroughly investigated, and a detailed examination of the adsorbed rate of dye molecules onto lignocellulosic biomass materials is carried out. This includes a lively discussion of the pseudo-first, pseudo-second, and intra-particle diffusion models. The thermodynamic aspects of the adsorption process are also addressed, elucidating the feasibility and spontaneity of the removal process under various temperature conditions. The paper then dives into desorption studies, providing insights into the regeneration potential of lignocellulosic biomass materials for sustainable reusability. The environmental impact and cost-effectiveness of employing lignocellulosic biomass materials in textiles including Congo Red, Reactive Black 5, Direct Yellow 12, Crystal Violet, Malachite Green, Acid Yellow 99, and others dyes from wastewater treatment are discussed, emphasizing the significance of eco-friendly solutions. In summary, this review brings together a wealth of diverse studies and findings to present a comprehensive overview of lignocellulosic biomass materials as adsorbents for textile cationic and anionic dye removal, encompassing various aspects from influential parameters to kinetics, adsorption isotherms, desorption, and thermodynamics studies. Its scope and other considerations are also discussed along with its benefits. The collective knowledge synthesized in this paper is intended to contribute to the advancement of sustainable and efficient water treatment technologies in the textile industry.