Due to the ever-increasing discharge of antibiotic residues into different water bodies, there is a significant need to improve existing water treatment methods. In this study, we synthesized calcium oxide nanoparticles from periwinkle shells using the sol-gel method for applications in the adsorption and photodegradation of tetracycline from wastewater. The nanoparticles were characterized using FTIR, UV-Visble spectroscopy, XRD, SEM-EDX, TEM, BET and TGA/DTA. The nanostructure produced showed strong crystalline, optical, structural and surface properties. With an average crystallite size of 25 nm, particle size of 2.09 nm, BET surface area of 582.68 m2/g, specific surface area of 90.08 m2/g, bandgap of 4.8 eV and other properties that supported their functionality as adsorbent and photocatalyst for the removal of tetracycline residue from water. The adsorption experiment gave a maximum efficiency of about 80% while the photodegradation catalysed by the nanoparticles indicated efficiency up to 97%. Both adsorption and photodegradation showed strong dependency on pH, tetracycline concentration, catalyst load and concentration of KI. Response surface analysis and subsequent experimental validation indicated that degradation approaching 100% for tetracycline is feasible under optimum conditions involving concentration = 500 ppm, time = 50 min, catalyst load = 1.25 g and KI concentration = 0.25 M. Computational calculations gave results that are in good match with experimental data and further proved that the degradation is limited by adsorption and is majorly controlled by oxidation facilitated by O2*.
Read full abstract