Test Methods Research Articles

A 2024 inventory of test methods relevant to thyroid hormone system disruption for human health and environmental regulatory hazard assessment

Thyroid hormone system disruption (THSD) is a growing concern in chemical hazard assessment due to its impact on human and environmental health and the scarce methods available for assessing the THSD potential of chemicals. In particular, the general lack of validated in silico and in vitro methods for assessing THS activity is of high concern. This manuscript provides an inventory of test methods relevant to THSD. Building on the Organisation for Economic Co-operation and Development (OECD) Guidance Document 150 and recent international developments, we highlight progress in in silico and in vitro methods, as well as in vivo assays. The provided inventory categorizes available methods according to the levels of the OECD Conceptual Framework, with an assessment of the validation status of each method. At Level 1, 12 in silico models that have been statistically validated and are directly related to THSD have been identified. At Level 2, 67 in vitro methods have been listed including those assessed in key initiatives such as the European Union Network of Laboratories for the Validation of Alternative Methods (EU-NETVAL) validation study to identify potential thyroid disruptors. At Levels 3-5, THSD-sensitive endpoints are being included in existing fish-based OECD Test Guidelines to complement amphibian assays. In total, the inventory counts 108 entries comprising established methods (e.g., OECD Test Guidelines) as well as citable methods that are under further development and in some cases are ready for validation or in the initial stages of validation. This work aims to support the ongoing development of strategies for regulatory hazard assessment, such as integrated approaches to testing and assessment (IATAs), for endocrine disruptors, addressing critical gaps in the current testing landscape for THSD in both human and environmental health contexts.

An accelerated corrosion-fatigue testing method for marine high-strength steel based on equivalence principle of fatigue crack growth

The corrosion-fatigue test is widely used to assess marine equipment. However, due to the low-frequency and high-cycle loading of marine equipment in service, conventional test methods require long cycle times and high costs. This makes it challenging to meet the rapid evaluation demands associated with equipment development effectively. In this study, an accelerated corrosion test method was proposed for steel by adjusting the composition, temperature, pH and H2O2 concentration of environment. Fatigue crack growth tests were conducted under various corrosion environments and load frequencies. The matching relationships between corrosion fatigue acceleration multiplier, corrosion environment parameters and load parameters were established. Additionally, a corrosion fatigue acceleration test method was proposed based on the equivalent principle of fatigue crack growth. The results show that effective coupling between corrosion and fatigue can be achieved by gradually reducing the load frequency as the stress intensity factor amplitude increases throughout the crack growth process. It is consistent with the trend of fatigue crack growth rate in the seawater environment. The 4.85% fatigue life deviation and the 15.68 times corrosion fatigue acceleration can be achieved by our method. This work improves the accuracy and reliability of fatigue performance evaluation for offshore equipment.

Atmospheric pressure plasma jet deposition of TiO2 layer on alumina/epoxy to improve electrical properties

Abstract In gas-insulated lines, basin-insulators can accumulate charge under non-uniform electric fields, distorting the field distribution and potentially causing surface flashover, which threatens the stability of power systems. In this study, Atmospheric Pressure Plasma Jet (APPJ) technology was used to deposit TiO2 on the surface of alumina/epoxy (Al2O3/EP) composites. The impact of deposition of TiO2 layer on the surface morphology and chemical composition of Al2O3/EP was studied using testing methods such as Scanning Electron Microscope, X-ray photoelectron spectroscopy, Fourier Transform Infrared Spectrometer, and Energy Dispersive Spectrometer. It was found that APPJ creates a dense, rough Ti-O layer on the Al2O3/EP surface, which bonds tightly with the substrate. The efficacy of APPJ was found to depend on processing time, with optimal results observed at 3 min, DC and AC flashover voltages increased by 29.6% and 15.7%, respectively. TiO2 layer enhances the conductivity of the resin and shallows trap levels. Through the synergistic effects of various factors, surface charges are efficiently dissipated and evenly distributed. This study not only reveals the physicochemical process of TiO2 deposition via APPJ but also integrates surface characteristics with electrical performance. The findings offer a new strategy to enhance surface flashover voltage and ensure equipment safety.

The relationship between childhood hunger experiences and activities of daily living disability: a mediating role of depression.

Hunger is an important public health issue. This study aims to explore the impact of childhood hunger experiences (CHEs) on activities of daily living (ADL) disability and to discover the mediating role of depression on this correlation. Data were derived from the China Health and Retirement Longitudinal Study 2011, 2013, 2015, 2018, and 2020. Depression was assessed using the Centre for Epidemiological Studies Depression Scale. ADL disability, basic ADL (BADL) disability and instrumental ADL (IADL) disability were assessed using the ADL scale. The relationships between CHEs, depression and ADL disability were estimated using probit methods, and the mediating effect of depression was estimated using the stepwise regression test and bootstrap methods. A total of 9,905 sample were included in the study. The study found that CHEs increased ADL disability by approximately 9.1% (β = 0.091, 95% CI: 0.028, 0.154), and increased the probability of IADL disability by approximately 8.0% (β = 0.080, 95% CI: 0.016, 0.144). CHEs increased ADL disability by approximately 29.8% (β = 0.298, 95% CI: 0.202, 0.393) in samples under 60 years of age. CHEs indirectly increased ADL (β = 0.062, 95% CI: 0.000, 0.124) by increasing the probability of depression. CHEs predicted ADL disability, and depression mediated this correlation. There is a need to focus on the impact of CHEs on mental and physical health. In particular, focusing on mental health is necessary to prevent impairment of physical functioning.

Scalable log-ratio lasso regression for enhanced microbial feature selection with FLORAL.

Identifying predictive biomarkers of patient outcomes from high-throughput microbiome data is of high interest, while existing computational methods do not satisfactorily account for complex survival endpoints, longitudinal samples, and taxa-specific sequencing biases. We present FLORAL, an open-source tool to perform scalable log-ratio lasso regression and microbial feature selection for continuous, binary, time-to-event, and competing risk outcomes, with compatibility for longitudinal microbiome data as time-dependent covariates. The proposed method adapts the augmented Lagrangian algorithm for a zero-sum constraint optimization problem while enabling a two-stage screening process for enhanced false-positive control. In extensive simulation and real-data analyses, FLORAL achieved consistently better false-positive control compared to other lasso-based approaches and better sensitivity over popular differential abundance testing methods for datasets with smaller sample sizes. In a survival analysis of allogeneic hematopoietic cell transplant recipients, FLORAL demonstrated considerable improvement in microbial feature selection by utilizing longitudinal microbiome data over solely using baseline microbiome data.

Uterine cysts in mares

This work is aimed at studying the etiology, prevalence, diagnosis, treatment of uterine cysts and their difference from the embryo during ultrasound examination. Endometrial cysts are often the cause of infertility and indicate pathological changes in the uterus, occurring in older mares. There are two types of uterine cysts: endometrial glandular cysts and lymphatic lacunar cysts. Endometrial cysts are usually smaller than lymphatic cysts located in the endometrium and are composed of endometrial glands. Lymphatic cysts cause obstruction of the lymphatic channels and appear as single or multilobular structures. Cysts can result from chronic degenerative changes in the endometrium and their clinical significance varies. For example, in terms of fertility, their influence is related to size, conditioning, content and location in the uterus. The presence of small cysts often indicates matte structures. In addition, larger or more active cysts have an impact on the course of pregnancy. Single large or small cysts can lead to embryonic pregnancy failure, which is the most difficult recognition of maternal pregnancy. Careful testing methods can effectively monitor the mare's condition and ensure the prospects for a successful pregnancy. This pathology is diagnosed using rectal and ultrasound examinations. There are many treatment options: they can be removed by surgery, hysteroscopic biopsy forceps, snare, laser (diode, CO2 or Nd/YAG laser), electrocoagulation or injection of 70 % ethanol (sclerotherapy method). But unfortunately, many cysts are prone to relapse. Sometimes the presence of cysts can interfere with the diagnosis of pregnancy or lead to an erroneous diagnosis of “multiple pregnancy”, since cysts under ultrasound exposure appear as filling fluid structures in the endometrial lumen. For this reason, it is important to be able to diagnose, predict consequences and treatment options in the mare.

The Genetic Basis of Non-Contact Soft Tissue Injuries-Are There Practical Applications of Genetic Knowledge?

Physical activity increases the risk of non-contact injuries, mainly affecting muscles, tendons, and ligaments. Genetic factors are recognized as contributing to susceptibility to different types of soft tissue injuries, making this broad condition a complicated multifactorial entity. Understanding genetic predisposition seems to offer the potential for personalized injury prevention and improved recovery strategies. The candidate gene analysis approach used so far, has often yielded inconclusive results. This manuscript reviews the most commonly studied genetic variants in genes involved in the musculoskeletal system’s structure and recovery processes (ACTN3, ACE, CKM, MLCK, AMPD1, IGF2, IL6, TNFα, CCL2, COL1A1, COL5A1, MMP3, and TNC). Referring to the literature, it was highlighted that single-gene analyses provide limited insight. On the other hand, novel genetic testing methods identify numerous variants of uncertain physiological relevance. Distinguishing between functionally important variants, modifying variants, and the thousands of irrelevant variants requires advanced bioinformatics methods and basic multiomics research to identify the key biological pathways contributing to injury susceptibility. Tools like the Total Genotype Score (TGS) and Polygenic Risk Score (PRS) offer a more holistic view by assessing the combined effect of multiple variants. However, these methods, while useful in research, lack clinical applicability. In conclusion, it is too early to determine the clinical implications of genetic variability as a tool for improving well-established training and injury prevention methods, as the predictive power of genetic testing for injury predisposition is currently low.

Comparison of three different ice hockey helmets using an ice hockey specific test protocol

Although there are currently no standard tests measuring rotational head motion for ice hockey, researchers have proposed test methods which induce rotational head motion from an impact and may reflect more closely how concussions occur in the sport. Recently, Meehan et al. developed a test method for ice hockey helmets to represent concussive injuries associated with ice hockey. While that provided a method that used impact parameters closer to what may be experienced, the research did not evaluate if different helmets would produce differing results under those loading conditions. The purpose of this study is to use the methods developed by Meehan et al. to evaluate the protective capacity of three different ice hockey helmet designs. This research used monorail drop rig and pneumatic ram systems to follow the protocol of Meehan with a bare headform condition and three different helmet designs, allowing for differences in linear and rotational acceleration, rotational velocity, and maximum principal strain to be determined. The results of this research found that the test method developed by Meehan et al. does result in significant differences between different helmets and helmet designs under identical impact conditions. However, these differences were limited which may be a reflection of the test method as well as commonality in terms of how ice hockey helmets are designed; the different models may not be sufficiently different enough to provide different results under these loading conditions.

Hematologic cancers and infections: how to detect infections in advance and determine the type?

Infection is one of the leading causes of death in patients with hematologic cancers. Hematologic cancer patients with compromised immune systems are already susceptible to infections, which come on even more rapidly and are difficult to control after they develop neutrophil deficiencies from high-dose chemotherapy. After patients have developed an infection, the determination of the type of infection becomes a priority for clinicians. In this review, we summarize the biomarkers currently used for the prediction of infections in patients with hematologic cancers; procalcitonin, CD64, cytokines, and CD14 et al. can be used to determine bacterial infections, and (1-3)-β-D-glucan and galactomannan et al. can be used as a determination of fungal infections. We have also focused on the use of metagenomic next-generation sequencing in infections in patients with hematologic cancers, which has excellent clinical value in infection prediction and can detect microorganisms that cannot be detected by conventional testing methods such as blood cultures. Of course, we also focused on infection biomarkers that are not yet used in blood cancer patients but could be used as a future research direction, e.g., human neutrophil lipocalin, serum amyloid A, and heparin-binding protein et al. Finally, clinicians need to combine multiple infection biomarkers, the patient’s clinical condition, local susceptibility to the type of infection, and many other factors to make a determination of the type of infection.

Kinetic Bacterial Endotoxin Testing Methods: Specifics of Analytical Conditions Exemplified by Medicinal Products from Different Classes

INTRODUCTION. Kinetic bacterial endotoxin (BE) testing methods based on amoebocyte lysate from the haemolymph of the horseshoe crab can quantify BEs in parenteral medicinal products across a broad range of concentrations. To develop a specific analytical procedure that is based on these methods and can be implemented into pharmaceutical quality control and standardisation, it is required to ascertain the conditions for its use, in particular, to determine the lowest product dilution that would neutralise interfering factors.AIM. This study aimed to develop an analytical procedure for the quantitative determination of BEs by the kinetic chromogenic method.MATERIALS AND METHODS. The study examined samples of medicinal products containing active substances from different classes, including a monoclonal antibody (mepolizumab) and a direct-acting anticoagulant (nadroparin). The BE limits for mepolizumab and nadroparin were ≤20 EU/mL and ≤95 EU/mL, respectively. The samples were tested at different dilutions, which did not exceed the maximum valid dilution. The measurements were performed using a BioТek EL×800 photocolourimeter and EndoScan-V software.RESULTS. The results for mepolizumab samples show that the kinetic chromogenic method can quantify BEs in mepolizumab medicinal products in the dilution range of 1:10 to 1:40. The study detected BEs in quantities of 0.0078–0.224 EU/mL within this dilution range. However, at a dilution ratio of 1:50 or higher, the method is suitable only for qualitative BE tests. For nadroparin medicinal products, the quantitative determination of BEs should start at a dilution of 1:1000 (the study demonstrated no influence of interfering factors at this dilution).CONCLUSIONS. The authors developed analytical procedures for the determination of BEs in mepolizumab and nadroparin medicinal products by the kinetic chromogenic method (method D). When developing analytical procedures for the quantification of BEs in individual medicinal products, the developer should determine the lowest sample dilution that would neutralise interfering factors. Subsequently, the dilution should be specified in the documentation for the analytical procedure. This approach can enhance assay accuracy and save time and resources in routine testing.

Analysis of Current Approaches to Monitoring the Content of Depressor Substances

INTRODUCTION. Raw materials of biological origin can contaminate medicines with depressor substances, such as histamine, acetylcholine, bradykinin, serotonin, and prostaglandins. In the Russian Federation, tests for the content of these impurities are conducted in anaesthetised healthy cats in accordance with the General Chapter Test for depressor substances of the State Pharmacopoeia of the Russian Federation. The global trend towards ending animal testing and the search for ways to eliminate animal tests for depressor substances motivate researchers to study international approaches to the determination of histamine-like substances.AIM. This study aimed to analyse Russian and international approaches to the control of biologicals for depressor substances and to consider the applicability of alternative instrument-based physicochemical methods for the determination of histamine-like impurities, with a view to reducing animal testing.DISCUSSION. The rationale for reducing the use of animals as test systems is set forth in Directive 2010/63/EU of the European Parliament and of the Council of 22 September 2010 on the protection of animals used for scientific purposes. In 2023, the European Pharmacopoeia Commission initiated the removal of in vivo tests for histamine-like substances from the European Pharmacopoeia. However, China and India use animal testing as the basic method for assessing the safety of medicines. In the Russian Federation, the control of depressor substances is regulated under General Chapter 1.2.4.0008.18 of the State Pharmacopoeia of the Russian Federation. Since the publication of General Chapter 42-0063-07 Test for histamine in edition XII in 2007, the State Pharmacopoeia of the Russian Federation has included a compendial text providing for a reduction in the number of cats used for testing. At present, Russian scientists are searching for targeted physicochemical and immunochemical methods for the determination of depressor substances. It has been demonstrated that a reasonable approach is to assess the need for testing a particular medicinal product in animals on a case-by-case basis. This approach will help minimise the number of in vivo tests and maintain an adequate quality of medicines at the same time.CONCLUSIONS. Despite the global trend towards ending animal testing, it is still necessary and required to control medicines for the content of depressor substances. Nevertheless, there is no global consensus on the need to use animals for this purpose. The absence of a separate general chapter/monograph, or references to it, will not change the fact that histamine-like substances are controlled worldwide. The decision to exclude in vivo methods from the European Pharmacopoeia necessitates the search for alternative test methods and the implementation of additional manufacturing controls to minimise the contamination risk for finished medicinal products. Studies have shown that high-performance liquid chromatography can determine the content of histamine in a limited amount of a medicinal product.

State Pharmacopoeia of the Russian Federation Edition XV: Development Priorities

INTRODUCTION. Regular reviews of the current portfolio of general chapters and monographs are essential to ensure the well-balanced development of the State Pharmacopoeia of the Russian Federation (Ph. Rus.) in line with the priorities of the national healthcare system.AIM. This study aimed to identify the most promising areas for further Ph. Rus. development through an analysis of recent legislative changes in Russia and the current compendial portfolio.DISCUSSION. This article compares Ph. Rus. editions XIV and XV, analyses the key features and structure of edition XV, and reviews amendments to the regulations governing the Ph. Rus. publication. The current compendial portfolio is dominated by monographs on chemical active substances; it also includes a substantial number of monographs on herbal drugs and herbal drug preparations. Noteworthy, edition XV is the first Ph. Rus. edition to include a separate section dedicated to monographs on excipients necessary for the development of pharmacy compounding. Moreover, this article analyses the coverage of active substances that are used for the production of listed vital and essential medicines.CONCLUSIONS. The authors outlined the priority areas for the development of quality standardisation. The Ph. Rus. should continue developing monographs on active substances that are used for the manufacturing and compounding of listed vital and essential medicines. In addition, the coverage of herbal drugs should be expanded. The Ph. Rus. should develop monographs on excipients that are used for the manufacturing and compounding of medicinal products. Finally, the Ph. Rus. should complete the development of requirements for biological medicinal products and relevant test methods.

Effects of superabsorbent polymer and natural zeolite on shrinkage, mechanical properties, and porosity in ultra-high performance concretes

The low water-to-binder ratio of ultra-high performance concrete (UHPC) often causes shrinkage and cracking due to early-age self-desiccation. This leads to significant initial dimensional instability, which may compromise structural integrity. As a promising solution, internal curing agents such as superabsorbent polymers (SAP) and natural zeolite have the potential to mitigate shrinkage and achieve self-stressing properties. This research aims to provide a comprehensive comparison between SAP and zeolite's effects within a consistent UHPC formulation. Six UHPC mixtures (including the reference mixture) were designed: three with SAP dosages of 0.2%, 0.4%, and 0.6% by cement mass, and two with zeolite replacing silica fume at 25% and 50% by mass. Various testing methods, including autogenous and drying shrinkage assessment, heat of hydration and thermogravimetric analysis, compressive strength evaluation, mercury intrusion porosimetry (MIP), nuclear magnetic resonance (NMR), were employed to assess the mixtures at different stages of curing. The result reveals that the incorporation of SAP and zeolite in the mixtures significantly reduces UHPC's early-age autogenous shrinkage. Moreover, SAP and zeolite additions impact mechanical properties, demonstrating that a balance between shrinkage control and compressive strength can be reached, through an optimization of the additions to achieve the desired performance. Microstructural analysis through MIP and NMR reveals increased overall porosity of the UHPC with SAP and zeolite, suggesting that low-field NMR can be a valuable tool for complementing conventional test methods. The outcome of this study provided valuable insights into optimizing the balance between durability and mechanical performance, paving the way for more sustainable and cost-effective applications of UHPC in modern construction practices.

Personalized Nutrition: Tailoring Diets Based on Genetic Profiles

Personalized nutrition represents a transformative approach in dietary science, utilizing genetic information to tailor dietary recommendations that enhance individual health outcomes. This field combines insights from nutrigenomics and nutrigenetics to understand how genetic variations influence nutrient metabolism, dietary preferences, and chronic disease susceptibility. By leveraging advancements in genetic testing methods, such as single nucleotide polymorphism (SNP) analysis and whole genome sequencing, healthcare professionals can offer customized dietary plans that align with an individual’s unique genetic profile. The implementation of these plans, while promising to improve health and wellness, faces challenges related to ethical considerations, accessibility, and the need for robust regulatory frameworks. This paper discusses the role of genetics in nutritional needs, examines various genetic testing methods, outlines the practical implementation of personalized nutrition plans, and evaluates the benefits and challenges associated with this innovative dietary approach. Keywords: Personalized Nutrition, Nutrigenomics, Nutrigenetics, Genetic Testing, Dietary Recommendations.

Dual‐Low Technology in Coronary and Abdominal CT Angiography: A Comparative Study of Deep Learning Image Reconstruction and Adaptive Statistic Iterative Reconstruction‐Veo

ABSTRACTTo investigate the application advantages of dual‐low technology (low radiation dose and low contrast agent dose) in deep learning image reconstruction (DLIR) compared to the adaptive statistical iterative reconstruction‐Veo (ASIR‐V) standard protocol when combing coronary computed tomography angiography (CCTA) and abdominal computed tomography angiography (ACTA). Sixty patients who underwent CCTA and ACTA were recruited. Thirty patients with low body mass index (BMI) (< 24 kg/m2, Group A, standard protocol) were reconstructed using 60% ASIR‐V, and 30 patients with high BMI (> 24 kg/m2, Group B, dual‐low protocol) were reconstructed using DLIR at high strength (DLIR‐H). The effective dose and contrast agent dose were recorded. The CT values, standard deviations, signal‐to‐noise ratio (SNR), and contrast‐to‐noise ratio (CNR) were measured. The subjective evaluation criteria were scored by two radiologists using a blind Likert 5‐point scale. The general data, objective evaluation, and subjective scores between both groups were compared using corresponding test methods. The consistency of objective and subjective evaluations between the two radiologists were analyzed using Kappa tests. Group B showed a remarkable 44.6% reduction in mean effective dose (p < 0.01) and a 20.3% decrease in contrast agent dose compared to Group A (p < 0.01). The DLIR‐H demonstrated the smallest standard deviations and highest SNR and CNR values (p < 0.01). The subjective score of DLIR‐H was the highest (p < 0.01), and there was good consistency between the two radiologists in the subjective scoring of CCTA and ACTA image quality (κ = 0.751 ~ 0.919, p < 0.01). In combined CCTA and ACTA protocols, DLIR can significantly reduce the effective dose and contrast agent dose compared to ASIR‐V while maintaining good image quality.

A methodology for selection of solid desiccants in energy recovery ventilators

Controlling indoor humidity levels is essential for maintaining acceptable indoor air quality in buildings. The use of energy recovery ventilators (ERVs) is an energy-efficient way to regulate indoor air humidity. Fixed-bed regenerators and rotary wheels are widely used ERVs because of their high sensible and latent effectiveness. These ERVs are made of desiccant-coated substrates, which enable them to transfer moisture between the supply and exhaust air streams. However, the moisture transfer ability of ERVs depends on the physiochemical and sorption properties of desiccants. Extensive, full-scale experiments are required to determine the best desiccant material for these systems. This paper presents a simplified method of selecting suitable desiccant materials for ERVs. The methodology involves important characterization methods, literature correlations for performance prediction, and cost-effective testing methods prior to full-scale testing, and full-scale test methods are discussed in detail. Furthermore, the performance of a few newly derived materials is evaluated and compared with that of conventional desiccants such as silica gel and molecular sieves. The highest latent effectiveness was obtained for composite of super absorbent polymer (SAP) with potassium formate (SAP-HCO2K-50 %), all-polymer porous solid desiccant (APPSD) and metal organic framework (MOF)–MIL–101 (Cr), followed by activated carbon fibre felt (ACF) Silica sol-LiCl30, SAP, silica gel, MOF–303, and molecular sieve. Researchers and manufacturers would benefit from the proposed methodology and presented data in developing new desiccant materials for ERV applications.

Progress in Zero-gravity Unloading Test and System Research of Solar Wing

Aim: The solar wing undertakes the important task of providing energy for spacecraft. The deployment test of the solar wing in a zero gravity environment using a zero gravity system on the ground is an important link to ensure the safe and stable deployment of the solar wing in space. This article briefly describes the development process and research progress of solar wings, introduces the ground zero gravity test methods and test platforms for solar wings, including some patents for improving the ground zero gravity test platform for solar wings, and points out some urgent problems that need to be solved in the zero gravity unloading test and system at present. Background: The solar wing needs to be deployed in the weightlessness environment of space before working. Objective: The objective of this study is to summarize the zero gravity experimental methods and systems of solar wings, introduce their categories, characteristics, and development. Methods: This article summarizes various scientific research achievements in the zero gravity test of solar wings, and introduces the advantages and disadvantages of the zero gravity test method of solar wings. Conclusion: Although research on zero-gravity unloading test systems for solar wings is continuously advancing, there are still several technological bottlenecks that need to be overcome in terms of system precision, payload capacity, dynamic simulation, method optimization, diversifying zero-gravity test methods and system universality for different types of solar panel unloading.

The Distribution of HR-HPV E6/E7 DNA and mRNA by Histological Grade and the Clinical Performance for Detection of Cervical Cancer and Precancer.

High-risk human papillomavirus (HR-HPV) testing, utilizing both DNA and RNA methods, offers enhanced sensitivity compared to cytology for detecting high-grade cervical intraepithelial neoplasia (CIN2+). Meanwhile, HR-HPV E6 and E7 mRNAs are more likely to differentiate the transient infection from the persistent than DNA. Aptima HPV can not only detect HPV mRNA but also HPV DNA though it is much more efficient at detecting HPV RNA than DNA. Currently, there are few studies on the distribution of HPV E6 and E7 mRNA and DNA in the same individual. It is interesting to compare the clinical performance of the Onclarity and Aptima HPV assays and to assess variations in viral load across different histological grades at both DNA and mRNA levels. The analysis included 1607 women (902 from a cervical cancer screening population and 705 inpatients and outpatients), with cervical cytological samples tested using the Aptima and Onclarity HPV assays. Both assays demonstrated high agreement for HPV types 18/45 and 16. Signal-to-cutoff (S/CO) values and Ct values for various HR-HPV types increased with histological severity from normal tissue to cancer. Notably, HPV18 Ct values exceeded those for HPV16 and 45 in women with ≥ CIN1 lesions but decreased sharply in cancer cases. Across the screening population, both assays showed similar sensitivity and predictive values for detecting CIN2+ lesions. The area under the curve (AUC) for CIN2+ and CIN3+ detection in the study population was robust (CIN2+: 0.880, 0.863; CIN3+: 0.881, 0.863). The DNA level for various HR-HPV types increased with histological severity from normal tissue to cancer, which might impact the performance of Aptima HPV assay. Both assays showed similar sensitivity and predictive values for detecting CIN2+ lesions.

Факторна структура підготовленості тхеквондистів 15-17 років

Purpose: to investigate the factor structure of preparedness of taekwondo players of 15-17 years old. Material and Methods. The following methods were used in the research: analysis of scientific and methodical literature, pedagogical testing, medical and biological methods, methods of mathematical statistics. Results: in the course of the research the factor structure of preparedness of taekwondoists of 15-17 years old by the general sample was studied and 9 orthogonal factors were separated in which the sum of loading variables ranges from 9,571 to 1,736, describing 84,804 % of the total variance. The contribution of the first factor, «morpho-functional», to the total variance is 22,788 % and consists of 10 indicators. The second factor accounts for 13,068 % of the total variance, which reflects the special high-speed abilities of taekwondo players of 15-17 years old in the structure of which 7 indicators are included. In the third factor, which accounts for 11,334 % of the total variance, 7 indicators were the main ones. The fourth orthogonal factor has a contribution of 9,259 % of the total variance, the highest correlation was found in 3 indicators. This factor is characterized as a manifestation of coordination abilities with a combination of high-speed endurance (coordination high-speed endurance). The most significant indexes of the fifth factor (6,868 %) are the power index on the left hand (r=0,529) and performance of a side kick with the left (r=0,682) and right (r=-0,569) foot with a deployment on 360° for 15 s. This factor determines the manifestation of strength and the performance of complex coordination kicks and is interpreted by us as «coordination strength». The structure of the sixth factor «Frequency of movements» with a total variance of 6,431 % includes 3 indicators. The seventh factor «ability to control movements» with a total variance of 5,720 % consists of 2 indicators with the highest correlation of lateral kicks with the left foot in the body for 15 s (r=-0,596) and fencing in motion before losing balance with the left foot (r=0,500). The eighth factor «keeping balance»has 2 indicators: fencing for 15 s in the upper level with the left foot (r=0,559) and tilt of a trunk forward from a sitting position (r=-0,514) with a contribution to the general variance of 5,203 %. This is due to the fact that when performing fencing for 15 s in the upper level with the left foot, the athlete stands on one leg and performs blows to the head with the other, to perform this technical technique, the taekwondo player needs a good display of flexibility. The ninth factor reflects reactivity of muscles of hands and has a contribution of 4,133 % of the general dispersion and is characterized by throwing a tennis ball on a distance (r=-0,519). Conclusions. The research has established a dependence between components of preparedness of taekwondo fighters of 15-17 years old, also the most significant factors which reflect morpho-functional indicators, a manifestation of special high-speed abilities, power, coordination and high-speed endurance have been established. With the help of factor analysis, 9 factors were separated, out of 42 considered indicators, the contribution of which is 22,788-4,133 % and is 84,804 % of the total variance. The largest contribution of 22,788 % to the total variance of the sample of taekwondoists of 15-17 years old has morphological and functional indicators.

Design and experimental verification of composite stiffened panel under combined compression-shear loads

Abstract As an important part of the aircraft, the panel structure accounts for a large proportion of the building block verification system. The real stress state of the aircraft panel is usually not a uniaxial compression or shear, but a combined loading condition in service. In the past, box structure was usually tested for structure selection in the aircraft’s preliminary design phase, which was limited by immature panel test methods and equipment. At present, a general panel test system considering the actual load form and boundary conditions was independently developed by the Aircraft Strength Research Institute of China. A large-scale composite stiffened panel was designed and tested on this test system in this paper. The whole process of the test was monitored by digital image correlation technology and strain gauge measurement. The test process and results were detailed and analyzed. Experimental results show that the failure modes of stiffened panels under combined compression-shear loads include mainly three forms. The first is in the upper part of the panel, which shows a typical shear failure mode and tears along the shear loading direction of the specimen. The second is the fracture of the reinforced piece in the bottom right-hand corner of the specimen due to compression loads. The third form is the large-scale cracking at the junction of the reinforced piece and skin, which may be related to the coupling effect of combined loading.