Test Methods Research Articles

A New Sufficient & Necessary Condition for Testing Linear Separability Between Two Sets.

As a fundamental mathematical problem in the field of machine learning, the linear separability test still lacks a theoretically complete and computationally efficient method. This paper proposes and proves a sufficient and necessary condition for linear separability test based on a sphere model. The advantage of this test method is two-fold: (1) it provides not only a qualitative test of linear separability but also a quantitative analysis of the separability of linear separable instances; (2) it has low time cost and is more efficient than existing test methods. The proposed method is validated through a large number of experiments on benchmark datasets and artificial datasets, demonstrating both its correctness and efficiency.

Non-Contact Magnetometric Diagnostics of Pipelines Using the Metal Magnetic Memory Method

The non-contact magnetometric diagnostics (NCMD) of buried pipelines (oil and gas pipelines, heat lines, water supply lines, etc.) has been developed by Energodiagnostika Co. Ltd. since 2000 based on the 25-year experience of the metal magnetic memory (MMM) method application (ISO 24497-1:2007(E)). NCMD is based on measurement along the pipeline route of the Earth’s magnetic field intensity (HEarth) distortions caused by variation of the pipe metal magnetization in stress concentration zones (SCZs) and in zones of developing corrosion-fatigue damages. The paper describes the experience of complex diagnostics of buried pipelines based on NCMD, the MMM method and conventional methods of non-destructive testing. Based on NCMD results, the most strained pipeline sections are determined for their opening and additional control by the MMM method, ultrasonic testing and other NDT methods. On opened pipeline sections the MMM method is used to determine the presence of defects and the mechanical properties of the metal by hardness parameters. Inadmissible defects are removed, and the actual mechanical properties (yield strength and ultimate strength) are taken into account in check strength calculations. The inspection should provide the answer to the following question: “Where and when should a damage or an accident be expected?”. If this task is solved, then the possibility of timely replacement or repair of a potentially hazardous section is provided. Application of NCMD in combination with additional inspection of pipelines (UT, eddy current, etc.) in prospect holes determined by NCMD is aimed exactly at solution of this problem. The paper presents the experience of NCMD of buried polyurethane foam insulated pipelines in order to detect girth welded joints with developing damage.

Experimental study on grouting inspection of PC tendons by means of Ultrasonic Pulse Echo Tomography method

Evaluation of grouting condition of post-tensioned tendons in Prestressed Concrete (PC) structures is an important problem in a field of maintenance of civil engineering infrastructure. Existing methods of non-destructive testing (NDT) used for grouting inspection have some limitations. For example, Impact-Echo method has comparatively low accuracy and X-Ray method is expensive and time- and labor-consuming. At the same time, there are promising alternative methods of NDT, which can be used for grouting inspection. The authors carried out an experiment using several large-scale specimens simulating PC girders. Commercially available Ultrasonic Pulse Echo Tomography device with an array of dry-contact sensors was used. Several cases of grouting condition, PC sheath diameter and geometry and rebar placement were studied. It was confirmed that amplitude of reflected ultrasonic pulse in the case of not grouted PC sheath is larger, as compared with a case of a grouted PC sheath. However, depending on diameter of PC sheath, distance from PC sheath to concrete surface and presence of nearby reinforcement, evaluating grouting condition based only on amplitude of reflected ultrasonic pulse can be problematic. To solve this problem authors developed a more accurate method of evaluating grouting condition, which uses multiple parameters, such as amplitude of ultrasonic pulse reflected from PC sheath, backwall and phase of reflected ultrasonic pulse.

Real-Time Phased Array Ultrasonic Monitoring of Debonding Growth Under Cycling Loading in CFRP

Carbon Fibre Reinforced Polymer (CFRP) composites are widely employed in diverse industries due to their specific stiffness and strength, and corrosion resistance. However, over time, service-induced damage can initiate a failure that can threaten the operation’s safety and reliability, especially in critical industries like aerospace applications. The challenge lies in identifying and monitoring the defects before they escalate into serious issues. Non-Destructive Testing (NDT) methods play a pivotal role in this scenario, aiming to detect and evaluate defects without causing harm to the material. Detecting flaws in composite materials such as CFRP remains a complex task. Traditional NDT methods often struggle to effectively pinpoint and assess defects within these intricate structures. However, recent advancements in ultrasonic testing, especially Phased Array Ultrasonic Testing (PAUT), show promise in examining the internal composition of CFRP composites with higher accuracy and reliability. This study aims to demonstrate the applicability of PAUT for real-time monitoring of debond growth under dynamic loading. The loading was applied to the test specimens up to one million cycles, and 64 elements 2 MHz linear phased array probe was attached to the specimen. The acquired signals were analyzed and could also be recorded for offline processing or archiving. To validate the credibility of the findings, the performance of PAUT was compared to Acoustic Emission (AE), a well-established method for detecting and analysing high-frequency signals emitted by materials undergoing deformation or damage. Encouragingly, both methods exhibited similar trends in capturing the growth of debond. Furthermore, to verify the final defect lengths, post-test ultrasonic C-Scans utilizing the through transmission technique were conducted, complemented by visual inspections. These assessments served to confirm the accuracy and reliability of the results obtained through Phased Array Ultrasonic Testing. Real-time monitoring of composite structures using phased array technology comprises a valuable tool for real- time assessment of debonding in the composite. As industries continue to rely on Carbon Fibre Reinforced Polymer composites for multifaceted applications, the utilization of advanced Non-Destructive Testing methodologies like Phased Array Ultrasonic Testing emerges as a cornerstone in guaranteeing their continued integrity and performance.

Bone mineral density and osteoporosis related risk factors in type 2 diabetes mellitus

Diabetes mellitus negatively affects bone tissue and unfavourably impacts bone mineral density (BMD), therfore increasing the probability of fractures through pathological mechanisms. This study aimed to explore the factors associated with BMD and osteoporosis risk in individuals with a diagnosis of type 2 diabetes mellitus (T2DM). An investigation was undertaken involving 49 patients diagnosed with T2DM who fulfilled the specified criteria. These individuals underwent BMD assessment as part of a cross-sectional study. The analysis encompassed both univariate and bivariate approaches, utilizing the Chi-square test (X2) and binary logistic regression methods. A total of 30 participants (61%) have decreased BMD. Among the participants aged 60 years and above, 83.4% exhibited a decreased BMD status (osteopenia and osteoporosis), in contrast to the under 60 years age group, in which 40% displayed decreased BMD status. Older age (>60 years) is a risk factor for decreasing bone density onset of diabetes mellitus (DM) diagnosis, duration of DM, glycemic control, body mass index (BMI), use of thiazolidinediones (TZD) drugs, kidney function, were not associated with lower BMD in T2DM patients.

Production of low-CO2 ternary binder using red sandstone, cement, and granulated blast furnace slag: A comprehensive performance analysis

Red sandstone is rich in reserves, and using it as a mineral admixture to partially replace cement can save cement consumption and reduce carbon dioxide emissions. This study uses spectral characterization, electron microscopy image analysis, mechanical property testing and other methods to study the fluidity, compressive strength, heat of hydration, carbonation degree, microstructure and thermal damage of composite cement-based materials containing red sandstone and slag. The experiment results showed that in ternary mixed cement, the composite cement mixed with 5% slag and 10% red sandstone shows similar flow properties to cement paste. Moreover, as the mineral content (red sandstone and slag) increases, the dissolution peak of the Al phase appears earlier, and the degree of carbonation increases. Furthermore, the CO2 emissions per unit strength gradually decrease. After 28 days of curing, thermal damage experiments demonstrated that the strength of the sample increases by more than 3.6% when the mineral content is greater than 15% at 200℃. Samples were subjected to 600 °C and 900 °C, and the strength of the red sandstone sample with a content of 15% decreased significantly. Moreover, as the temperature increases to (600 °C and 900 °C), the lattice of CnS becomes more and more ordered.

Comprehensive Inspection Solution for Boiler Water Wall Tube Corrosion

A substantial number of domestic coal-fired boilers, most of which have been in operation for numerous years, are susceptible to corrosion and tube ruptures within their high-temperature environment, often resulting in unplanned shutdowns. Despite the annual planned maintenance shutdowns, which involve routine inspections of water wall and furnace tubes to detect potential corrosion and erosion, the current non-destructive testing methods are generally localized. This approach, particularly with the considerable height variation of the water wall tubes (ranging from approximately 10 to 25 meters), may overlook segments with severe corrosion during localized ultrasonic thickness gauging. Although the experience of inspection teams reduces the chance of defect oversight, the demand for a comprehensive and effective inspection technique remains a priority for boiler operators. This study utilizes the characteristic of guided waves to propagate over a certain distance along pipelines, initiating an exploration into a comprehensive inspection solution for water wall tubes. Finite element simulation results demonstrate the suitability of utilizing a 120 kHz frequency for shear horizontal mode (SH0) testing on the fire side of water wall tubes. This mode effectively screens for localized corrosion within a 3-meter range. In the field of on-site boiler inspection, electromagnetic coils are employed to generate guided waves within water wall tubes. The gathered signals from each electromagnetic guided wave testing (EMGWT) are consolidated into a distribution map, indicating suspicious signal locations. Pulse eddy current testing (PECT) is employed to identify potential issues with guided waves without requiring surface preparation. If PECT reveals anomalies, the affected surface is polished, and phased array ultrasonic testing (PAUT) is conducted to quantitatively measure the remaining wall thickness due to corrosion. The theoretical exploration and on-site inspection outcomes affirm the feasibility of this approach, aimed at enhancing operational safety for boiler water wall tubes and mitigating the risks of tube ruptures and leaks. This comprehensive inspection solution amalgamates three advanced detection technologies, each capitalizing on its unique inspection characteristics to facilitate corrosion screening, corrosion scanning, and wall thickness sizing. Through the integration of these technologies, the overall inspection strategy ensures the utmost level of reliability.

Analysis of the structural behavior of reinforced concrete components with acoustic emission analysis

The use of non-destructive testing methods can provide insights into processes within the interiors of structures. Acoustic emission testing is one of the non-destructive testing methods that allows the detection of material damage during its occurrence. When structures, such as concrete components, fail under load, elastic waves are generated, propagating within the component. These signals can be detected by acoustic emission sensors placed on the surface of the component, enabling the tracking of the material's condition and the location of failure. This paper summarizes recent applications of acoustic emission measurements on large-scale laboratory specimens made of reinforced concrete. The first example describes measurements during a tensile fatigue test on a large- scale reinforced concrete specimen to investigate the fatigue behaviour of an embedded concrete dowel. The second example involves measurements during a dynamic three-point bending test to examine the fatigue behaviour of a prestressed concrete railway sleeper. The third example describes a full-scale test conducted on a flat slab concrete test specimen with dimensions of 2.8 m × 2.8 m. The objective of these investigations is the development and optimization of new components to enhance punching shear resistance and provide an economical solution. To detect microcracking during loading acoustic emission measurement has been carried out using broadband sensors with a measurement frequency of up to 200 kHz which were especially developed for the detection of microcracks in concrete. For the three-dimensional location of the acoustic emission events, 16 of these acoustic emission sensors were attached to the surface of the specimens. Most of the events were in the centre of the sample in the punching area. These events form a circular structure with a diameter of approximately 1m. A visual inspection of the sample after the experiment shows that macroscopic cracks have formed in this area, which extend up to the surface of the sample.

Patented Formulations, Nanotherapeutics and Herbal Compound Applications for Dry Eye : A Review

Background: The defining features of dry eye syndrome, a frequent tear and ocular surface multifactorial disorder, are changes in the ocular surface epithelia linked with less tear production and elevated sensitivity of the ocular surface, which trigger an inflammatory response. Aqueous deficit dry eye and evaporated dry eye are the two common types of dry eye. A few of the testing methods used to detect Dry Eye Disease are the Schirmer’s test, Tear Meniscus Volume, Tear Break-up Time, Tear Film Thickness, Meibomian Gland Infrared Meibography, Lissamine Green Staining, and Rose Bengal Staining. Hyperosmolarity and instability are the main pathogenic processes of dry eye disease. These systems are intricately linked to one another and create a "vicious circle" that never ends. Objective: The objective of this review was to describe patented formulations, novel drug delivery systems and herbal drugs for Dry Eye Disease. Results: Following a thorough assessment, the current study has elaborated a number of patented formulations in the form of contact lenses, biomarkers, novel approaches, and emulsions (traditional dosage forms) as well as natural medicines. In comparison to standard dosage forms, contact lenses and novel approaches have longer contact times and higher bioavailability. Conclusion: In this paper, the diagnostic methods of dry eye disease, the outcomes of pathophysiology, herbal treatments, nanotherapeutics, and current patented medicine formulations are described.

System interactive reader using eye-tracker technology in ebook reader

Interest in using ebooks by the academic community is very high. Still, there is a problem when readers are reading through screens, tend to read fast, only scan the necessary parts, and don't focus on paying attention to the content they read, so this reduces the quality of reading because readers don't study the overall meaning of the sentence. Hence, this research aims to build an interactive reader system by integrating eye tracker technology with a webcam which is expected to solve the problem of decreasing the quality of reading through the screen by helping readers stay focused on their reading and providing an interactive system that makes it easier for readers to control the computer while reading. This research adopts the waterfall method and is divided into six stages. The system is designed using class diagrams, use case diagrams, and activity diagrams. Also, the system is built using the Python language with the Django framework. Then, the interactive reader system was tested using black box testing and usability testing methods. Based on the test results, it is shown that the interactive reader system that was built can help improve the quality and concentration when reading activities take place.

Unlocking the Future: Privacy-Preserving ML Experimentation

Abstract: Experiments with machine learning (ML) have become a key source of new ideas in many fields. However, growing worries about data privacy have made it clear that we need ML testing methods that protect privacy. There are new technologies in this piece that let you play around with machine learning without putting your data at risk. Differential privacy, secure multiparty computation (SMPC), homomorphic encryption, federated learning, trusted execution environments (TEEs), making fake data, and using temporary and nameless IDs are some of these technologies. By using these privacy-protecting solutions, businesses can utilize the full potential of machine learning experiments while protecting individuals' privacy rights and staying in line with strict rules.

VisionCart: Enhancing E-Commerce with Augmented Reality for an Immersive Shopping Experience Using Flutter and Arkit

Abstract: In the fast-paced digital era, VisionCart stands out as an innovative solution blending e-commerce and Augmented Reality (AR). VisionCart revolutionizes shopping by offering customers an immersive AR experience, allowing them to visualize products in their actual surroundings before making a purchase. This is achieved through the powerful combination of Flutter, ARKit, and Firebase. Central to our project is the ambition to redefine online shopping, with a special focus on enhancing accessibility for the visually impaired. VisionCart delivers a user-friendly interface, robust backend services, and advanced AR capabilities by seamlessly integrating these cutting-edge technologies. This abstract serves as an introduction to a detailed exploration of our project, covering its objectives, foundational technologies, implementation strategies, testing methods, and future prospects

Safe Insulation from the Inside as a Solution to the Energy and Climate Crisis

Along with rapid climate changes, issues related to energy efficiency and efficient use of energy are becoming more and more relevant in the EU. One of the energy-consuming sectors is buildings, which are responsible for about 40% of the EU final energy consumption and 36% of CO2 emissions. In addition to this, the current energy crisis has acutely raised the issue of energy poverty. Therefore, one of the ways to fight with energy poverty and high energy consumption in buildings is insulation from the inside. However, warming from the inside is risky due to hygrothermal processes and mold risks. This study assesses the hygrothermal performance of masonry walls with 9 interior insulation systems exposed to different external conditions in the climate chambers. Masonry walls were tested in a steady cycle, a dynamic cycle, a dynamic cycle with rain and a steady cycle as drying. Also, an identical simulation of the hygrothermal process was carried out in the DELPHIN software to compare results of both testing methods. Both vapor-open and vaportight systems were chosen as insulation systems. Results show that the hygrothermal behavior of vapor-open and vapor-tight insulation systems are different under different test cycles regarding different vapor diffusion resistance of materials. Mathematical simulations results are different from the climate chamber simulations, because of the change in material humidity, that are changing during climate chambers simulations. From this it can be concluded that mathematical simulations do not give a complete vision of hydrothermal processes, because they are dynamic, but in modeling the properties of materials are defined. The study provides valuable data on hygrothermal processes in different wall insulation systems from the inside.

Colistin, the last resort antibiotic: challenges in the implementation of its routine susceptibility testing

Background: colistin has become a critical antibiotic for lifethreatening multidrug resistance Gram-negative infections, particularly carbapenemase-producing bacteria. Detecting colistin resistance in routine microbiology laboratories is crucial for combating these fatal infections poses a challenge. Especially in developing countries, there is a need for a cost-effective, rapid, and user-friendly diagnostic method. Objective: implementing the various available methods for colistin testing is a significant challenge in resource-limited settings due to logistic difficulties and the need for technical expertise. Materials and Methods: this study shares experiences and insights gained while implementing in-vitro colistin susceptibility testing in a high-load bacteriology laboratory of a tertiary care center in Delhi, India. The following test methods for colistin susceptibility testing were incorporated in the routine antimicrobial susceptibility testing of our laboratory: Colistin Agar Test, Colistin Broth Disk Elution Test, Broth Microdilution susceptibility testing. Results: inconsistent growth patterns were observed in the colistin agar dilution Minimum Inhibitory Concentration (MIC) method, which could be resolved only after the preparation of fresh plates containing that specific concentration of colistin. The contamination issue of plates on use over a few days was addressed by pouring agar containing various concentrations of colistin in cottonplugged glass tubes. In the colistin broth disk elution test, due to the non-availability of screw-capped 10 mL glass tubes, MacCornety bottles (30 mL) were used. Subcultures were performed from the turbid wells to rule out the growth of contaminants when encountering discordant MIC values or skipped wells on the colistin broth microdilution test. Conclusions: despite several technical issues in in-vitro colistin susceptibility testing, we have successfully implemented it in our laboratory. Our experiences can offer guidance to laboratories that are still in the process of implementing it.

The evaluation of skin sensitization potential of the UVCB substance diisopentyl phthalate by in silico and in vitro methods.

Diisopentyl phthalate (DiPeP) is primarily used as a plasticizer or additive within the production of polyvinyl chloride (PVC), and has many additional industrial applications. Its metabolites were recently found in urinary samples of pregnant women; thus, this substance is of concern as relates to human exposure. Depending upon the nature of the alcohol used in its synthesis, DiPeP may exist either as a mixture consisting of several branched positional isomers, or as a single defined structure. This article investigates the skin sensitization potential and immunomodulatory effects of DiPeP CAS No. 84777-06-0, which is currently marketed and classified as a UVCB substance, by in silico and in vitro methods. Our findings showed an immunomodulatory effect for DiPeP in LPS-induced THP-1 activation assay (increased CD54 expression). In silico predictions using QSAR TOOLBOX 4.5, ToxTree, and VEGA did not identify DiPeP, in the form of a discrete compound, as a skin sensitizer. The keratinocyte activation (Key Event 2 (KE2) of the adverse outcome pathway (AOP) for skin sensitization) was evaluated by two different test methods (HaCaT assay and RHE assay), and results were discordant. While the HaCaT assay showed that DiPeP can activate keratinocytes (increased levels of IL-6, IL-8, IL-1α, and ILA gene expression), in the RHE assay, DiPeP slightly increased IL-6 release. Although inconclusive for KE2, the role of DiPeP in KE3 (dendritic cell activation) was demonstrated by the increased levels of CD54 and IL-8 and TNF-α in THP-1 cells (THP-1 activation assay). Altogether, findings were inconclusive regarding the skin sensitization potential of the UVCB DiPeP-disagreeing with the results of DiPeP in the form of discrete compound (skin sensitizer by the LLNA assay). Additional studies are needed to elucidate the differences between DiPeP isomer forms, and to better understand the applicability domains of non-animal methods in identifying skin sensitization hazards of UVCB substances.

A multicenter study on the accuracy of PAX1/JAM3 dual genes methylation testing for screening cervical cancer

Objective: To explore the value of cervical cytologic DNA methylation for screening cervical cancer. Methods: This study was a prospective multicenter study conducted from May to October 2022 in Peking Union Medical College Hospital, Zhejiang Provincial People's Hospital, and the Second Affiliated Hospital of Zhejiang University School of Medicine. Women who accepted opportunistic cervical cancer screening in gynecological outpatient clinics were subjected to liquid-based thin-layer cytology testing (TCT), high-risk human papillomavirus (hrHPV) DNA testing and PAX1/JAM3 dual-genes methylation testing (PAX1m/JAM3m). Colposcopy evaluation and biopsy were offered to women according to current guidelines. The accuracies of various testing methods and their combinations were compared based on histological diagnosis. Results: A total of 1 184 samples diagnosed by histopathology were included in this study, consisting of 541 cases (45.7%) of benign cervical tissue or chronic cervicitis, 273 (23.1%) of cervical intraepithelial neoplasia (CIN) 1, 168 (14.2%) of CIN2, 140 (11.8%) of CIN3, and 62 (5.2%) of cervical cancer. The sensitivity and specificity of PAX1m/JAM3m testing for detecting CIN2 or more severe lesions (CIN2+) were 74.1% and 95.9%, respectively. The sensitivity and specificity of PAX1m/JAM3m testing for detecting CIN3+were 87.6% and 86.8%, respectively. Receiver operating characteristic curve analysis showed that, for detecting CIN3+, the area under curve of PAX1m/JAM3m testing (0.872, 95%CI: 0.847-0.897) was significantly superior to TCT testing (0.580, 95%CI: 0.551-0.610) or hrHPV testing (0.503, 95%CI: 0.479-0.515) (all P values<0.05). Conclusions: The PAX1m/JAM3m test in cervical exfoliated cells has excellent accuracy for the diagnosis of both CIN2+and CIN3+, which is superior to traditional screening protocols and screening strategies.

Earning Moderates the Influence of CAR, NPL, and BOPO on Company Value in Conventional Banks Listed on the IDX for the 2020-2022 Period

The goal of research on traditional commercial banks listed on the Indonesia Stock Exchange (IDX) is to use earnings as a moderator to ascertain the impact of the capital adequacy ratio (CAR), non-performing loan (NPL), and BOPO on the value of the company. Variables This study uses a quantitative approach and sample data collection through purposive sampling. The samples obtained for this study are 69 samples that meet the standards of the Indonesia Stock Exchange (IDX) and financial statements for the 2020-2022 period. Classical hypothesis testing and moderate regression analysis (MRA) methods were used to analyze the results of this study. The results showed that the Capital Adequacy Ratio (CAR) did not have a significant effect on the value of the company, and non-performing loans (NPL) did not have a significant effect on the value of the company and operating costs. (BOPO) does not have a significant influence on the value of the company. Capital Adequacy Ratio (CAR) can be changed and affect company value, profit cannot moderate the impact of non-performing loans (NPL) on company performance Product value cannot reduce Operating Costs and Operating Income (BOPO) to company value.

Stability of Liposomal Membrane of Hemoglobin-Vesicles (Artificial Red Cells) for Over Years of Storage Evaluated Using Liquid Chromatography-Mass Spectrometry.

Hemoglobin-Vesicles (Hb-V) are artificial oxygen carriers encapsulating a purified and concentrated Hb solution in liposomes composed of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), cholesterol, 1,5-O-dihexadecyl-N-succinyl-l-glutamate (DHSG), and 1,2-distearoyl-sn-glycero-3-phosphatidylethanolamine-N-poly(ethylene glycol) (PEG5000) (DSPE-PEG). The safety and efficacy of Hb-V have been studied extensively by both preclinical and clinical test methods. Deoxygenation of Hb-V prevents autoxidation of Hb and can extend its shelf life to 2 years at room temperature. However, the lipid components raise concerns about hydrolysis because Hb-V is dispersed in saline. For this study, we attempted to estimate the lipid degradation of long-term stored Hb-V using liquid chromatography-mass spectrometry. Analyses of lipid components extracted from the stored Hb-V showed that the degradation increased depending on the storage temperature. The calculated % remaining of intact lipids of Hb-V were 98.1% after 4 years and 90.4% after 7.2 years at 4 °C, 95.8% after 1 year and 86.7% after 2 years at 25 °C, and 85.6% after 6 months at 40 °C. The main degradation products were lyso-PC and palmitic acid which are hydrolyzed at the ester bond of DPPC. A few hydrolyzed products of DHSG and DSPE-PEG were also detected in Hb-V, but almost no degradation or oxidation products derived from cholesterol could be identified. A shear test of Hb-V at 1500 s-1 showed no significant increase in Hb leakage after storage of 2 years at 25 °C and 6 months at 40 °C. Lipid degradation products including free fatty acids would decrease the pH of the Hb-V dispersion and synergistically facilitate degradation, but it maintained pH 6.5 during 6 years at 4 °C, 2 years at 25 °C, and 3 months at 40 °C because of its high buffering capacity. These results indicate that the storage conditions for Hb-V are appropriate to minimize lipid degradation in the long term.

Analysis of Road Surface Texture for Asphalt Pavement Adhesion Assessment Using 3D Laser Technology

Pavement adhesion plays a crucial role in driving safety, while traditional test methods exhibit some limitations. To improve the efficiency and accuracy of asphalt pavement texture characterization and adhesion assessments, this paper uses three-dimensional (3D) laser technology to detect the continuous point cloud data of road surface and reconstruct the 3D topography of pavement texture. On this basis, a volume parameter Volume of peak materials (Vmp) is innovatively proposed to comprehensively characterize the 3D spatial characteristics of road surface texture. The correlation analysis between the proposed Vmp and the traditional adhesion evaluation index Transversal Adhesion Coefficient (CAT) is conducted, and then refined graded adhesion prediction models based on the proposed Vmp are proposed. Results show that the proposed volume parameter Vmp can reliably and accurately characterize the asphalt pavement texture by considering more structural properties of the road surface texture. According to the research findings of this paper, it is feasible to achieve rapid and correct assessment of asphalt pavement adhesion using 3D laser detection technology by comprehensively considering the 3D characteristics of the road surface texture.

Sulfur Modified Carbon-Based Single-Atom Catalysts for Electrocatalytic Reactions.

Efficient and sustainable energy development is a powerful tool for addressing the energy and environmental crises. Single-atom catalysts (SACs) have received high attention for their extremely high atom utilization efficiency and excellent catalytic activity, and have broad application prospects in energy development and chemical production. M-N4 is an active center model with clear catalytic activity, but its catalytic properties such as catalytic activity, selectivity, and durability need to be further improved. Adjustment of the coordination environment of the central metal by incorporating heteroatoms (e.g., sulfur) is an effective and feasible modification method. This paper describes the precise synthetic methods for introducing sulfur atoms into M-N4 and controlling whether they are directly coordinated with the central metal to form a specific coordination configuration, the application of sulfur-doped carbon-based single-atom catalysts in electrocatalytic reactions such as ORR, CO2RR, HER, OER, and other electrocatalytic reaction are systematically reviewed. Meanwhile, the effect of the tuning of the electronic structure and ligand configuration parameters of the active center due to doped sulfur atoms with the improvement of catalytic performance is introduced by combining different characterization and testing methods. Finally, several opinions on development of sulfur-doped carbon-based SACs are put forward.