Test Group Research Articles

Developing a Chinese Language Course Integrating Deep Learning Theory and OBE: Promote Critical Thinking Skill for Undergraduate Students in Guangzhou, China

This study aims to develop and evaluate a Chinese language course designed to enhance college students' critical thinking skills through the integration of deep learning theory and Outcome-Based Education (OBE). The research specifically addresses two questions: (1) What are the characteristics of a Chinese language course that integrates Deep Learning Theory and OBE? (2) What are the effects of this course on promoting critical thinking skills among undergraduate students? The study employs a quasi-experimental design, involving 120 undergraduate students divided into a control group and a test group from Nan fang College, Guangzhou, China. The control group received conventional teaching methods, while the test group participated in the newly developed course. Data were collected through pre-tests and post-tests using California critical thinking skills test (Chinese version), as well as semi-structured interviews. Results indicate a significant improvement in the critical thinking skills of students in the test group compared to the control group. The test group showed higher mean scores and lower standard deviations in post-test results, demonstrating the effectiveness of the course in enhancing critical thinking abilities. Qualitative data from interviews supported these findings, highlighting increased student engagement and deeper understanding of course materials. The findings suggest that this integrated approach can be effectively implemented in other educational contexts to achieve similar outcomes.

Impact of anti leukemia inhibitory factor antibody on immune related gene expression in breast cancer Balb/c mouse model

Leukemia inhibitory factor (LIF) is involved in the progression of different cancers. In this study, we investigated the effect of anti-LIF antibodies on immune-related gene expression in the Balb/c mouse model of breast cancer. To immunize mice against LIF, recombinant LIF with Freund adjuvant was injected into the test group, whereas the control group received phosphate-buffered saline with adjuvant. Tumor induction (4T1 cell line) was performed by increasing the antibody titer. The expression of immune-related genes was evaluated by real-time PCR. The anti-LIF titer was significantly increased in the immunized group. The expression of genes related to the differentiation of T helper (Th)-1, Th-2, and Th-17 cells was significantly higher in the immunized group than in the control group. In addition, anti-LIF did not have a significant effect on the expression of genes related to the differentiation of regulatory T cells, and immune checkpoint-associated genes. Additionally, the test group had higher survival and lower tumor development rates. The results demonstrated that the anti-LIF antibody may potentially play a role in the differentiation of immune cells or immune responses. However, further studies utilizing advanced techniques are necessary to validate its function.

Synthetic lumbar MRI can aid in diagnosis and treatment strategies based on self-pix networks

CT and MR tools are commonly used to diagnose lumbar fractures (LF). However, numerous limitations have been found in practice. The aims of this study were to innovate and develop a spinal disease-specific neural network and to evaluate whether synthetic MRI of the LF affected clinical diagnosis and treatment strategies. A total of 675 LF patients who met the inclusion and exclusion criteria were included in the study. For each participant, two mid-sagittal CT and T2-weighted MR images were selected; 1350 pairs of LF images were also included. A new Self-pix based on Pix2pix and Self-Attention was constructed. A total of 1350 pairs of CT and MR images, which were randomly divided into a training group (1147 pairs) and a test group (203 pairs), were fed into Pix2pix and Self-pix. The quantitative evaluation included PSNR and SSIM (PSNR1 and SSIM1: real MR images and Pix2pix-generated MR images; PSNR2 and SSIM2: real MR images and Self-pix-generated MR images). The qualitative evaluation, including accurate diagnosis of acute fractures and accurate selection of treatment strategies based on Self-pix-generated MRI, was performed by three spine surgeons. In the LF group, PSNR1 and PSNR2 were 10.884 and 11.021 (p < 0.001), and SSIM1 and SSIM2 were 0.766 and 0.771 (p < 0.001), respectively. In the ROI group, PSNR1 and PSNR2 were 12.350 and 12.670 (p = 0.004), and SSIM1 and SSIM2 were 0.816 and 0.832 (p = 0.005), respectively. According to the qualitative evaluation, Self-pix-generated MRI showed no significant difference from real MRI in identifying acute fractures (p = 0.689), with a good sensitivity of 84.36% and specificity of 96.65%. No difference in treatment strategy was found between the Self-pix-generated MRI group and the real MRI group (p = 0.135). In this study, a disease-specific GAN named Self-pix was developed, which demonstrated better image generation performance compared to traditional GAN. The spine surgeon could accurately diagnose LF and select treatment strategies based on Self-pix-generated T2 MR images.

Comparative Analysis of Calcium and Hydroxyl Ion Release from Pulp Dressing Materials in Pulpotomized Premolars.

BACKGROUND The aim of this study was to evaluate the time-dependent release of calcium (Ca⁺⁺) and hydroxyl (OH⁻) ions from 3 different pulp dressing materials used to cap root canal orifices in pulpotomized premolars. MATERIAL AND METHODS Freshly extracted (n=40) premolars were subjected to standardized pulpotomy procedure and finally restored in 5 groups using resin-modified glass ionmmer liner (RMGI) and bonded resin composite directly against the pulp chamber's floor (Control, G2) and over 3 different orifices' capping materials - Dycal (G3), Endo Sequence root repair material (ESRRM, G4), and mineral trioxide aggregate (MTA) Angelus (G5). Another 10 sound premolars served as the Reference group (G1). The restored teeth were incubated at 37±1°C in sealed containers filled with deionized water to assess Ca⁺⁺ and OH⁻ ions release after 24 h and at 1, 4, and 8 weeks. Two-way ANOVA and Tukey's comparisons at alpha=0.05 were used to statistically analyze the collected data. RESULTS Two-way ANOVA revealed significant differences in Ca⁺⁺ ions between test groups at different testing time intervals (P<0.05). Despite the constant (Tukey's, P<0.05) pH levels (OH⁻ release), Group 5 specimens exhibited higher Ca⁺⁺ ion release in comparison to Groups 4 and 3 at different testing timepoints (Tukey's, P<0.05). CONCLUSIONS Although all the assessed pulp dressing materials had equivalent and stable pH levels, ESRRM and MTA-Angelus had the highest Ca⁺⁺ ion release at the assessment intervals.

Pengembangan Media Pembelajaran Berbasis Video Canva pada Materi Ajar Aborsi Mata Pelajaran Pendidikan Agama Katolik

The purpose of this study is to determine the effectiveness and feasibility of Canva application-based video media on Chatolic Religious Education material “abortion”. The method used in this study is developmental studies. The development of this Canva application-based video product uses the ADDIE model type, which consists of five steps: analyze, design , development, implementation, and evaluation. The target group for product testing is high school students. This product was validated by 1 design expert, 1 media expert, 1 material expert, 5 students for small group trials and 30 students big group trials. result of this research is the development of Canva-based video learning media in Chatolic Religious Education class in material “abortion” in eleventh grade learning obtained feasible and effective results as a developed learning media.

Experimental study on grinding process of Al-Mg2Si aluminum matrix composites

As an aluminum-based reinforcement, Mg2Si particles have excellent properties such as high hardness, high melting point, and high elastic modulus compared with other reinforcements and are widely used in aerospace and automobile fields. However, there is little research on the cutting mechanism of this material. In order to explore the surface grinding mechanism of Mg2Si/Al composites, Grinding simulation of low-volume fraction Mg2Si/Al composites was carried out by ABAQUS, and the influence of different positions of matrix and particle removal on the surface quality of Mg2Si/Al composites was expounded. The plane reverse grinding test was carried out by using CBN (boron nitride) grinding wheel. The L16(43) orthogonal test and three groups of single factor tests were designed. The orthogonal results show that the linear velocity of the grinding wheel has the greatest influence on the surface roughness, and the feed rate and grinding depth are significantly smaller. The range analysis shows that the optimal grinding parameters are: vs = 35 m/s, vw = 0.75 m/min, ap = 0.015 mm. The regression equation for surface roughness was established by using MATLAB. The single factor results show that the surface quality is obviously improved by increasing the linear velocity of the grinding wheel and reducing the feed rate and grinding depth through the observation of the morphology of the processed specimen. The analysis results show that defects such as pits, protrusions, burrs, and a small amount of fish-scale-like on the machined surface are mainly caused by the linear velocity of the grinding wheel, the pulling force of the grinding wheel, and the adhesion of the debris. The defects such as particle micro-cracks, particle pull-out, and matrix cracking on the subsurface, are mainly caused by the compressive stress of the grinding wheel and the stress concentration of the particles. The research results have guiding significance for future composite material cutting research and actual cutting processing.

Coagulation disorders in myocardial infarction with nonobstructive coronary arteries

Aim. To investigate the state of the platelet and plasma components of hemostasis in patients with myocardial infarction with non-obstructive coronary arteries (MINOCA).Material and methods. The study included 42 patients with non-ST-segment elevation myocardial infarction (NSTEMI): MINOCA (n=24) and MI-CAD (n=18). Platelet aggregation ability in response to activation was evaluated using Solar AP2110 and LASCA aggregometers. Platelet functional activity and calcium signaling were assessed using flow cytometry methods. The plasma component of hemostasis, in addition to routine coagulation tests was evaluated using the global coagulation test "Thrombodynamics". The control groups for tests consisted of healthy volunteers.Results. When analyzing the ability of platelets to form aggregates by the aggregometry tests, it was found that platelets in the MINOCA group formed aggregates significantly worse upon ADP stimulation at various concentrations compared to the MI-CAD group. However, when platelets were stimulated with collagen, the opposite effect was observed: in the MI-CAD group, there was a noticeable decrease in aggregate formation in terms of light scattering amplitude compared to the MINOCA group. Flow cytometry using the functional platelet activity test protocol revealed that both groups showed a significantly increased platelet size after activation, reduced platelet granularity) both at rest and upon activation, significantly decreased number of procoagulant phosphatidylserine-positive platelets, and reduced dense granule release upon activation compared to healthy volunteers. The calcium signaling test showed a weakened calcium release in response to ADP in the MINOCA group compared to the MI-CAD group. In the study of the plasma component, no significant differences between the groups or deviations were found according to both routine tests and the "Thrombodynamics" test.Conclusion. Platelet activity did not differ significantly between the MINOCA and MI-CAD groups; however, in the MINOCA group, platelet activity was lower in some tests compared to the MI-CAD group. In the study of the plasma hemostasis component, normocoagulation was recorded in both groups.

A Randomized Controlled Trial on the Timing of Soft-Tissue Augmentation in Immediate Implant Placement: Hard-Tissue Changes and Clinical Outcome.

To assess the impact of the timing of soft-tissue augmentation (STA) on mean buccal bone changes following immediate implant placement (IPP) in the anterior maxilla. Patients with a failing tooth and intact buccal bone wall in the anterior maxilla (15-25) were enrolled in this randomized controlled trial. Following single IIP and socket grafting, they were randomly allocated to the control group (immediate STA performed during the same surgical procedure) or the test group (delayed STA performed 3 months later). Implants were placed with a surgical guide and immediately restored with an implant-supported provisional crown. Changes in bone dimensions were assessed using superimposed CBCT images taken prior to surgery and at 1-year follow-up. Clinical outcomes were registered at 1-year follow-up. Twenty patients were randomized to each group (control: 16 females, 4 males, mean age 57.6; test: 9 females, 11 males, mean age 54.2). Ten patients in the control group and 13 patients in the test group had a thick bone wall phenotype. Estimated marginal mean horizontal buccal bone loss at 1 mm below the implant shoulder was -0.553 and -0.898 mm for the control and test group, respectively. The estimated mean difference of 0.344 mm in favour of the control group was not significant (95% CI: -0.415 to 1.104; p = 0.363). Also at all other horizontal and vertical levels, no significant differences could be observed between the groups. The combination of socket grafting and STA enabled counteraction of any buccal soft-tissue loss (≥ 0 mm) at 1 mm below the implant shoulder in 82% of the patients in the control group and in 75% of the patients in the test group (p = 1.000). The clinical outcome was favourable in both groups, yet implants in the control group demonstrated slightly less marginal bone loss (median difference 0.20 mm; 95% CI: 0.00-0.44; p = 0.028). In patients with an intact and mainly thick buccal bone wall in the anterior maxilla, the timing of STA following IIP had no significant impact on mean buccal bone loss. ClinicalTrials.gov identifier: NCT05537545.

Interpretable Machine Learning Model Based on Superb Microvascular Imaging for Non-Invasive Determination of Crescent Status of IgAN.

To assess the crescentic status of IgA nephropathy (IgAN) non-invasively using a superb microvascular imaging (SMI)-based radiomics machine learning (ML) model. IgAN patients who underwent renal biopsy from June 2022 to October 2023, with two-dimensional ultrasound (US) and SMI examinations conducted one day prior to the renal biopsy. The patients selected were divided randomly into a training group and a test group in a 7:3 ratio. Radiomic features were extracted from US and SMI images, then radiomic features were constructed and ML models were further established using logistic regression (LR) and extreme gradient boosting (XGBoost)XGBoost to determine the crescentic status. The utility of the proposed model was evaluated using receiver operating characteristics, calibration, and decision curve analysis. The SHapley Additive exPlanations (SHAP) was utilized to explain the best-performing ML model. A total of 147 IgAN patients were included in the study, with 103 in the training group and 44 in the test group .Among them, the US-SMI based XGBoost model achieved the best results, with an the area under the curve (AUC) of 0.839 (95% CI,0.756-0.910) and an accuracy of 78.6% in the training group.In the test group, the AUC was 0.859 (95% CI,0.721-0.964), and the accuracy was 81.8%, significantly surpassing the ML model of a single modality and the clinical model established based on occult blood. Additionally, the decision curve analysis (DCA) demonstrated that the XGBoost model provided a higher overall net benefit in the both groups. The SMI radiomics ML model has the capability to accurately predict the crescentic status of IgAN patients, providing effective assistance for clinical treatment decisions.

Slow drilling technique may enhance peri-operative patient-reported outcomes in dental implant surgery.

A randomized, controlled, single-blind clinical trial. To assess and compare patient-reported outcome measures (PROMs) between low-speed drilling without irrigation and high-speed drilling with irrigation for implant site preparation. The study adhered to the Declaration of Helsinki principles, obtained approval from the local Ethics Committee, was registered on ClinicalTrials.gov, and was written in accordance with CONSORT guidelines. Included were adult patients with single posterior edentulism who exhibited good oral hygiene, sufficient bone dimensions for implant placement, adequate keratinized mucosa, stable occlusion, and a healthy periodontium. Patients were randomly assigned to either the test group (low-speed drilling (150 rpm) without irrigation) or the control group (high-speed drilling (800 rpm) with irrigation). A single dental implant was placed for each patient, with all surgeries conducted by the same experienced operator according to a standardized protocol. Patient satisfaction during surgery, including drilling-time perception, vibration, pressure, noise, comfort, and drowning sensation, as well as postoperative pain and inflammation, were assessed using a 100-mm visual analog scale. Quality of life (QOL) was evaluated using a 5-graded Likert scale for mouth opening, chewing, speaking, sleeping, daily routine, and job. Follow up extended on daily basis for 7 days. The PROMs were collected and analyzed in a blinded manner by independent researchers and a statistician to prevent bias. The study included 66 patients (33 males and 33 females) with a mean age of 54.5 years. Patients in the test group reported a lower perception of drilling time, vibration, and noise but a higher perception of pressure compared to the control group; however, these differences were not statistically significant. Compared to the test group, patients in the control group experienced significantly greater drowning sensation and lesser comfort measures (p < 0.001). There was a moderate inverse correlation between drowning sensation and comfort (r = -0.57). The real drilling time was significantly longer in the test group compared to the control group (p < 0.001). The test group reported significantly lower pain levels during the first 12 h (p < 0.05), and significantly lower inflammation levels at the second day (p < 0.05) compared to the control group. No significant differences were observed between the groups at any time point for any of the QOL parameters (p > 0.05). For a single implant site preparation, low-speed drilling without irrigation seems to offer greater patient comfort compared to high-speed drilling with irrigation, mainly due to reduced drowning sensation. Patients reported less postoperative pain and inflammation with the low-speed technique. Confirming these findings will require more research.

The Effect of Tideglusib Application on Type 1 and Type 3 Collagen Expressions by Human Dental-Pulp Derived Stem Cells: A Preliminary Study.

Although Tideglusib cytotoxicity studies and its effects on human dental pulp-derived stem cells (DPSCs) have been examined in previous studies, there is no study investigating the expression of type 1 collagen and type 3 collagen by Tideglusib. The purpose of this study is to examine the effect of Wnt signaling activation using Tideglusib execution on human DPSC to determine its potential efficacy in collagen expression. Stem cell isolation was performed from five human third molar wisdom tooth pulps. DPSCs identified in only one sample were treated with 50 nM Tideglusib for 24 h and 1 week. Axin-2, type 1 and type 3 collagen expressions were evaluated by Western blot analysis. DPSCs without treatment served as a negative control. The Mann-Whitney U test was used for statistical analysis. The levels of type 1 collagen and Axin-2 in the test group were significantly higher than those in the control group at 24 h (P = 0.000, P = 0.001, respectively). Compared to the control group, a slight increase in type 3 collagen expression was observed in the test group at 24 h (P value = 0.063). Application of 50 nM Tideglusib for 1 week revealed marked decreases in type 1 and type 3 collagen expressions (P = 0.029, P = 0.038, respectively). In contrast, there was a significant increase in the level of Axin-2 (P = 0.000) compared to the control group. The fact that Wnt signaling pathway activation obtained by Tideglusib application on DPSCs confirmed by the finding in the increase of Axin-2 at short and long-term evaluation periods which is resulted in the increase in the type 1 collagen expression at 24 h and decrease at 1 week together with the decrease in type 3 collagen expression at 1 week warrants further studies to evaluate the effect of Tideglusib on extracellular matrix expression.

Reproductive Analysis of Bryophyllum pinnatum Leaf extract against Cadmium Induced Testicular Damage

The purpose of this study is to explore if treatment with aqueous leaf extract of Bryophyllum pinnatum was effective in minimising cadmium induced testicular damage on the testes of male wistar rats. Twenty (20) mature male wistar rats was collected from Animal House of the Faculty of Basic medical Sciences, Nnamdi Azikiwe University, Awka. Four subgroups, each consisting of four rats, were created from them. Group I was the control group and was given unlimited access to food and water for a period of two weeks. Group II was given a two-week treatmet of B. pinnatum together with CdcT + lovv. Group III had B. pinnatum at a medium dosage together with Cdcl for a fortnight. For two weeks, group IV received a high dosage of B. pinnatum along with Cdcl. Upon completion of the final dosage, the rats were sedated, and a blood sample was taken from each one via ocular puncture using a micro capillary tube for biochemical analysis and an epididymis dissection for semen analysis. All particulate parameters were analysed according to standard protocols. The results indicated a significant (p&lt;0.05) decrease in the rats’ final body weights in groups B and D in comparison to the control group. When the test groups’ testicular weight was compared to the control group, it dropped considerably (p&lt;0.05). Comparing all test groups to control, there was a significant (p&lt;0.05) decrease in both FSH and testosterone. When comparing the test groups to the control, there was a substantial (p&lt;0.05) decrease in the motility of active sperm, but there was a significant (p&lt;0.05) increase in the motility of sluggish and non-motile sperm. This study shown that Bryophyllum pinnatum leaf extract cannot reverse the reproductive harm caused by cadmium in rats. Keywords: Testes, Cadmium, Bryophyllum pinnatum, Reproductive Analysis, Cadmium and Testicular Damage

Clinical effectiveness of medical marijuana in patients with amyotrophic lateral sclerosis

Following legalization, Medical Marijuana (MM), has been used to treat the symptoms of Amyotrophic Lateral Sclerosis (ALS), yet data regarding Medical Marijuana's efficacy is lacking. Thus, we conducted a retrospective cohort study to assess Medical Marijuana's impact on ALS symptoms and progression. We reviewed the charts of all ALS patients treated in our clinic over a two-year period to collect data related to the primary outcome measures of symptoms of pain, poor appetite, anxiety, spasticity, insomnia, ALSFRS-R score, BMI, and MM use. Two groups were defined: a control group with target symptoms but no MM prescription, and a test group that filled a MM prescription, including a subgroup on MM for ≥3 visits. Outcomes were correlations between MM usage and symptom prevalence, and between MM usage and BMI and ALSFRS-R decline slope, analyzed using descriptive statistics and qualitative analysis via local regression. Data included 344 ALS patients. We found MM use correlated with alleviation of pain, poor appetite, and anxiety in the short term, but not with spasticity or insomnia. There was no correlation between MM use BMI maintenance. Notably, MM usage correlated with faster ALS progression, although patients using MM exhibited higher symptom burden and progressed faster than controls even pre-MM prescription. In conclusion, MM shows correlation with managing pain, poor appetite, and short-term anxiety in ALS, but is also correlated with faster disease progression based on ALSFRS-R scores. We suggest a multi-center, randomized controlled trial to evaluate both the clinical efficacy and safety of MM in the treatment of ALS.

Visualisation and quantification of subcutaneous injections of different volumes, viscosities and injection rates: An ex-vivo micro-CT study

The effects of subcutaneous (SC) injection parameters such as drug formulation volume, viscosity and injection rate on therapeutic performance and tolerability have not been established for any drug product. In this study four groups of SC injections were performed on fresh ex vivo minipig abdominal tissue samples, varying volume (0.5-1 mL), viscosity (1-11 cP) and rate (0.02-0.1 mL/s). Micro-CT provided high resolution (50 micron) imaging of the SC tissues before and after injection, enabling a detailed 3D visualisation and analysis of how both injection parameters and tissue microstructure influence spatial distribution of injectables. We found that volume was the only significant factor for spatial distribution of injectate within our design space, and there were no significant factors for tissue backpressure. Variability within test groups was typically greater than differences between group means. Accordingly, whilst the higher viscosity formulations consistently exhibited reduced spatial distribution, the sample size was not large enough to establish confidence in this result. Comparing our findings to clinical evidence, we conclude that injection site and depth are more likely to influence PK and bioavailability than volume, viscosity and rate within our experimental space.

A novel prognostic model based on telomere-related lncRNAs in gastric cancer.

Telomeres are specialized structures at the ends of chromosomes that are important for their protection. Over time, long non-coding RNAs (lncRNAs) have gradually come into the spotlight as essential biomarkers of proliferation, migration, and invasion of human malignant tumors. Nevertheless, the impact of telomere-related lncRNAs (TRLs) in gastric cancer is currently unknown. In the present study, we screen the TRLs and identify a prognostic TRLs signature in gastric cancer. First, telomere-related genes (TRGs) were retrieved from the website, and RNA sequencing (RNA-seq) data and clinical data of stomach adenocarcinoma (STAD) patients were gathered from The Cancer Genome Atlas (TCGA) database. Gastric cancer patients' lncRNAs and overall survival (OS) were found to be related using univariate Cox regression analysis. Next, least absolute shrinkage and selection operator (LASSO) regression analysis and multifactorial Cox regression analysis were used to further screen telomere-related differentially expressed lncRNAs (TRDELs), and finally six lncRNAs were obtained, including LINC01537, CFAP61-AS1, DIRC1, RABGAP1L-IT1, DBH-AS1, and REPIN1-AS1. According to these six TRDELs, a prognostic model for gastric cancer was constructed. The samples were divided into the training group and the testing group at random, and the reliability of prognostic model was validated in both groups and overall samples. In addition, we performed Kaplan-Meier (K-M) survival curve analysis, independent prognostic analysis, and functional enrichment analysis to validate the predictive value and independence of the model, as well as immune cell correlation analysis, clustering analysis, and principal component analysis (PCA) to further explore the relationship between this model and the tumor cells. Finally, we performed the drug sensitivity analysis to identify a few small molecules that may have a therapeutic effect on gastric cancer. Finally, we constructed a prognostic model for gastric cancer consisting of six TRDELs. According to the K-M curve, the prognosis of the low-risk group was noticeably superior than that of the high-risk group. Multivariate Cox regression analysis suggested that risk score was an independent prognostic element. Receiver operating characteristic (ROC) curves, nomogram, and calibration curve indicated that the prognostic model had good predictive ability. Functional enrichment analysis demonstrated major pathways with high- and low-risk groups. Next, both tumor microenvironment (TME) and immune correlation analysis showed discrepancy in the high- and low-risk groups. Through drug sensitivity analysis, we screened four small molecules that might be beneficial for gastric cancer treatment. A prognostic model consisting of these six TRDELs was capable to predict the prognosis of gastric cancer patients.

Developing and validating risk predicting models to assess venous thromboembolism risk after radical cystectomy.

Radical cystectomy (RC) patients are at significant risk for venous thromboembolism (VTE). Current predictive models, such as the Caprini risk assessment (CRA) model, have limitations. This research aimed to create a novel predictive model for forecasting the risk of VTE after RC. This single-center study involved RC patients treated between January 1, 2010 and December 31, 2019. The individuals were divided into training and testing groups in a random manner. Multivariate and stepwise logistic regression were utilized to create two novel models. The models' performance was compared to the commonly used CRA model, employing metrics including net reclassification improvement (NRI), integrated discrimination improvement (IDI), and receiver operating characteristic (ROC) curve analyses. A total of 272 patients were enrolled, among whom 36 were diagnosed with VTE after RC. Model A and Model B were then conducted. The area under ROC of Model A and Model B is 0.806 [95% confidence interval (CI): 0.748-0.856] and 0.833 (95% CI: 0.777-0.880), respectively, which were also determined in the testing cohorts. The two new Models were superior both in classification ability and prediction ability (NRI >0, IDI >0, P<0.01). Model A and Model B had a concordance index (C-index) of 0.806 and 0.833, respectively. In decision curve analysis (DCA), the two new models provided a net benefit between 0.02 and 0.84, suggesting promising clinical utility. Regarding predictive accuracy, both models surpass the existing CRA model, with Model A being advantageous due to its fewer variables. This easy-to-use model enables swift risk assessment and timely intervention for high-risk groups, yielding favorable patient outcomes.

Efficacy of Mucosamin Spray as an Adjunct for Prevention of Oral Mucositis in Children under Chemotherapy: A Two-Center Randomized Clinical Trial.

Chemotherapy-induced mucositis is the most common complication during cancer treatment. This complication can lead to pain, increased risk of infection and malnutrition. Therefore, it is important to find a solution to reduce the severity and duration of side effects. This study aimed to assess the efficacy of Mucosamin spray as an adjunct for prevention of oral mucositis in children under chemotherapy. This parallel-design clinical trial evaluated 48 patients aged 5 to 15 years with leukemia and lymphoma presenting to the Hematology Department of Mofid and Mahak Hospitals. The patients were randomly divided into two groups (n=24). Before starting chemotherapy, all patients received oral hygiene instructions (toothbrushing without flossing). Patients in both groups were requested to use a mouthwash composed of nystatin, aluminum-magnesium hydroxide suspension (aluminum MgS), and diphenhydramine for 1 min every morning on a daily basis starting the day before treatment. Patients in the intervention group were also requested to spray their entire oral mucosa with Mucosamin spray 3 times a day in addition to using the mouthwash. Patients were requested to refrain from eating and drinking for 1h after spraying. The patients were clinically examined by a senior dental student once every other day for 20 days regarding the occurrence, severity, and duration of oral mucositis. Data were analyzed using the Chi-square and Mann-Whitney tests, Kaplan-Meier survival analysis, and log rank test. No significant difference was noted between the two groups in the incidence, severity, or time of development of mucositis (p> 0.05). The 7-day non-recovery percentage was 72.7% (SE= 13.4) and 25.0% (SE= 15.3) in the control and test groups, respectively, indicating shorter duration (faster healing) of mucositis in the intervention group (p= 0.01). Within the limitations of this study, it seems that prophylactic application of Mucosamin spray can shorten the course of oral mucositis, in case of its occurrence.

The Effect of Cold Plasma and Low-Level Laser Therapy on Oral Fibroblast Proliferation

Background: Wound healing is a complex physiological process involving multiple phases and cellular mechanisms that restore damaged tissue. The oral cavity presents unique challenges for wound healing due to the presence of microorganisms and the impact of various diseases and treatments. Recent advancements, including low-level laser therapy (LLLT) and cold plasma, offer promising approaches to enhance wound healing by promoting cell proliferation and reducing inflammation. This study aimed to investigate the effects of cold plasma and low-level 980nm laser on the growth of oral fibroblasts and compare their respective impacts on wound healing. Methods: Human gingival fibroblasts were divided into nine study groups, including a control group. Two groups were exposed to low-level 980nm diode laser irradiation for 15 and 30 seconds, while six groups received cold plasma irradiation with helium gas at flow rates of 1.85, 2.78 and 5.56 cm3/s for the same durations. Fibroblast proliferation was evaluated on days 1, 3, and 5 after treatment using the MTT assay. Results: The results showed that on the 5th day after irradiation, 30 seconds of 980 nm laser irradiation significantly increased fibroblast proliferation compared to the other groups. In contrast, 15 seconds of plasma irradiation at a flow rate of 1.85 cm3/s had the least effect on promoting fibroblast proliferation. On the 1st day after radiation, plasma irradiation at flow rates of 2.78 and 5.56 cm3/s exhibited a greater impact on fibroblast proliferation compared to the other five test groups. Conclusion: The 980nm diode laser demonstrated a greater capacity to enhance the proliferation of oral fibroblasts compared to cold plasma using helium gas.

Efficacy and adverse reactions of arthroscopic medial collateral ligament release for medial meniscus injury: A meta-analysis

The posterior root tear of the medial meniscus has received increasing attention from scholars in recent years, with its incidence rate accounting for 10.1%–27.8% of all meniscal tears. A comprehensive search of eight databases was conducted to identify studies on the efficacy and negative consequences of arthroscopic medial collateral ligament release for medial meniscus damage. Data analysis was performed using RevMan 5.3 software, following a thorough assessment of the literature quality. A total of seven studies were included in this meta-analysis. Based on the data from these studies, there was no statistically significant difference between the test group and the control group in terms of Lysholm scores [standardized mean difference (SMD): 3.23; 95% confidence interval (CI): −1.61, 8.06; P = 0.191], IKDC scores (SMD: 0.42; 95% CI: −3.54, 4.37; P = 0.837), VAS scores (SMD: −0.48; 95% CI: −1.36, 0.40; P = 0.283), and operation time (SMD: −24.87; 95% CI: −41.68, −8.05; P &amp;lt; 0.01). According to Lysholm scores, IKDC scores, VAS scores, operation time, and adverse reactions, the findings of this research imply that arthroscopic medial collateral ligament release may be favorable to people who have medial meniscus injury. Nevertheless, current outcomes require confirmation by additional studies of excellent quality.

Cumulative effect of digital manufacturing techniques, preparation taper and finish line designs on the retention of aged temporary molar crowns − An in vitro study

ObjectiveThis study evaluated the effects of finish-line design, tooth preparation taper or total occlusal convergence (TOC), and digital production technology on the retention of provisional crowns for molars. Material and MethodsDifferent taper angles (10° TOC and 20° TOC) and finish line designs (chamfer and shoulder) were used to prepare four mandibular first molar teeth. Two subgroups of the prepared teeth received temporary crowns that were either “Computer-Aided Design” and “Computer-Aided Manufacturing (CAD/CAM) milled or 3D printed. Hence, eight test groups of temporary crowns containing 10 samples each were created. Groups 1–4 were milled, and Groups 5–8 were 3D printed specimens. A consistent procedure was used to cement 80 temporary crowns. The specimens were thermocycled for a total of 5000 heat cycles, initially at 5 °C for 30 s (dwell time) and then at 55 °C for 30 s. The pull-off force necessary to remove the temporary crowns was recorded, and the tensile strength, which served as the dependent variable, was calculated. Analysis of variance (ANOVA) was used to assess the variations in retention forces among the test groups. ResultsThe mean tensile strengths at maximum load [MPa] were higher in Groups 5, 6, 7, 8 (6.6 MPa, 6.91 MPa, 7.65 MPa, and 7.45 MPa respectively) as compared to the mean tensile strengths at maximum load [MPa] in Groups 1, 2, 3, 4 (2.35 MPa, 3.52 MPa, 3.21 MPa, and 2.45 MPa respectively). ConclusionFor extended periods, 3D-printed crowns with steeper preparation tapers (20° TOC) and shoulder finish lines exhibited enhanced retention.