Cracks have been developed in a large lecture hall on the University of Mosul Campus. These cracks exist along two sides of the building. Multi Analysis Surface Wave and Electrical Resistivity Tomography surveys were conducted at the surrounding building to investigate the nature and distribution of shallow subsurface soil/rock. The MASW’s data show three layers: the first layer is characterized by low shear wave velocity ranges between 210 and 420 m/s which is attributed to infill materials, the next layer is attributed to a river terrace (fairly competent rock) which has Vs ranging from 430m/s to 840 m/s. It is recognized by a gradual increase in mechanical characteristics as depth increases. In-depth between about 2.5m and 6.0 m the shear wave velocity drops in the top contact of this layer. The causes of low velocity may be due to weathering of the medium because of a sinkhole. The Electrical Resistivity Tomography profile shows four electrical zones, the first zone has 50-70 Ω.m. with a variable thickness from 0.5-1.5 m which indicates infill materials. The second zone has very low resistivity value, and a depth ranges 0.5m - 3.5 m, which might be interpreted to be increased clay, silt and water content (high water-saturated zone). The third zone is characterized by a high-resistivity value (>100 Ω.m) that could be related to a dry conglomerate rock and gravels belong to river terraces. The fourth zone has a low-resistivity value (<20 Ω.m) associated with a water-saturated marl bed. We could be definitively correlated the resistivity and velocity anomalies to sinkhole activity in were identified and characterized using combined geophysical methods. The Multi Analysis Surface Waves and Electrical Resistivity Tomography were shown to complete each other in the evaluation. The variations in Vs (low velocity) and resistivity (conductive zone) within the river terrace were detected and proposed to be indicative of dissolution and the subsidence responsible for structural damage implied by the change in the velocity and resistivity. The roughness of the top terrace surface strongly influences the nature of the velocity and resistivity values. This roughness is suggestive of dissolution or erosion.