Ternary Organic Solar Cells Research Articles

Dimerized small molecule donor enables efficient ternary organic solar cells

Ternary organic solar cells (OSCs) are the feasible and efficient strategy to achieve the high-performance OSCs. It is of great significance to develop a superior third component candidate for constructing efficient ternary OSCs. In this work, we intelligently designed and synthesized a dimerized small molecule donor by connecting two asymmetric small molecule donors with the vinyl group, which is named DSMD-βV. This innovative oligomeric molecule DSMD-βV not only exhibits the complementary absorption and the cascade energy level arrangement with PM6 and BTP-eC9, but also regulates the phase separation micromorphology based on PM6:BTP-eC9. Consequently, PM6:DSMD-βV:BTP-eC9 based ternary device exhibits the improved exciton dissociation, charge transport and decreased recombination, thus achieving a superior power conversion efficiency (PCE) of 18.26 %, surpassing PM6:BTP-eC9 based binary (17.63 %). This work indicates that the dimerized small molecule donor is able to become a promising third component candidate, which also opens up a unique idea for the construction of efficient ternary organic solar cells.

Enhanced Fill Factor and Efficiency of Ternary Organic Solar Cells by a New Asymmetric Non-Fullerene Small Molecule Acceptor.

Asymmetric non-fullerene small molecules acceptor (as-NF-SMAs) exhibit greater vitality in photovoltaic materials compared to their symmetric counterparts due to their larger dipole moments and stronger intermolecular interactions, which facilitate exciton dissociation and charge transmission in organic solar cells (OSCs). Here, we introduced a new as-NF-SMAs, named IDT-TNIC, as the third component in ternary organic solar cells (TOSCs). The asymmetric IDT-TNIC used indacenodithiophene (IDT) as the central core, alkylthio-thiophene as a unilateral π-bridge and extended end groups as electron-withdrawing. Due to the non-covalent conformational lock (NCL) established between O⋅⋅⋅S and S⋅⋅⋅S, the IDT-TNIC molecule preserves its coplanar structure effectively. Furthermore, IDT-TNIC exhibits complementary absorption and excellent compatibility with donor and acceptor materials, as well as optimized ladder energy level arrangement, resulting in a higher and more balanced μh/μe value, more homogeneous and suitable phase separation morphology in TOSCs. Thus, the PCE of the TOSCs reached 17 % when the weight ratio of PM6 : Y6 : IDT-TNIC was 1 : 1.1 : 0.1, and it is noteworthy that when the device area was increased to 1 cm2, the PCE could still be maintained at over 14 %. Detailed studies and analysis indicate that IDT-TNIC has great potential as a third component in OSCs and for large-scale printing in the future.

Designing A–D–A Type Fused‐Ring Electron Acceptors with a Bulky 3D Substituent at the Central Donor Core to Minimize Non‐Radiative Losses and Enhance Organic Solar Cell Efficiency

AbstractDesigning and synthesizing narrow band gap acceptors that exhibit high photoluminescence quantum yield (PLQY) and strong crystallinity is a highly effective, yet challenging, approach to reducing non‐radiative energy losses (▵Enr) and boosting the performance of organic solar cells (OSCs). We have successfully designed and synthesized an A–D–A type fused‐ring electron acceptor, named DM‐F, which features a planar molecular backbone adorned with bulky three‐dimensional camphane side groups at its central core. These bulky substituents effectively hinder the formation of H‐aggregates of the acceptors, promoting the formation of more J‐aggregates and notably elevating the PLQY of the acceptor in the film. As anticipated, DM‐F showcases pronounced near‐infrared absorption coupled with impressive crystallinity. Organic solar cells (OSCs) leveraging DM‐F exhibit a high EQEEL value and remarkably low ▵Enr of 0.14 eV‐currently the most minimal reported value for OSCs. Moreover, the power conversion efficiency (PCE) of binary and ternary OSCs utilizing DM‐F has reached 16.16 % and 20.09 %, respectively, marking a new apex in reported efficiency within the OSCs field. In conclusion, our study reveals that designing narrow band gap acceptors with high PLQY is an effective way to reduce ▵Enr and improve the PCE of OSCs.

Designing A-D-A Type Fused-Ring Electron Acceptors with a Bulky 3D Substituent at the Central Donor Core to Minimize Non-Radiative Losses and Enhance Organic Solar Cell Efficiency.

Designing and synthesizing narrow band gap acceptors that exhibit high photoluminescence quantum yield (PLQY) and strong crystallinity is a highly effective, yet challenging, approach to reducing non-radiative energy losses (▵Enr) and boosting the performance of organic solar cells (OSCs). We have successfully designed and synthesized an A-D-A type fused-ring electron acceptor, named DM-F, which features a planar molecular backbone adorned with bulky three-dimensional camphane side groups at its central core. These bulky substituents effectively hinder the formation of H-aggregates of the acceptors, promoting the formation of more J-aggregates and notably elevating the PLQY of the acceptor in the film. As anticipated, DM-F showcases pronounced near-infrared absorption coupled with impressive crystallinity. Organic solar cells (OSCs) leveraging DM-F exhibit a high EQEEL value and remarkably low ▵Enr of 0.14 eV-currently the most minimal reported value for OSCs. Moreover, the power conversion efficiency (PCE) of binary and ternary OSCs utilizing DM-F has reached 16.16 % and 20.09 %, respectively, marking a new apex in reported efficiency within the OSCs field. In conclusion, our study reveals that designing narrow band gap acceptors with high PLQY is an effective way to reduce ▵Enr and improve the PCE of OSCs.

Highly Efficient Organic Solar Cells with the Highly Crystalline Third Component as a Morphology Regulator.

The morphology of the active layer is crucial for highly efficient organic solar cells (OSCs), which can be regulated by selecting a rational third component. In this work, the highly crystalline nonfullerene acceptor BTP-eC9 is selected as the morphology regulator in OSCs with PM6:BTP-BO-4Cl as the main system. The addition of BTP-eC9 can prolong the nucleation and crystallization progress of acceptor and donor molecules, thereby enhancing the order of molecular arrangement. Meanwhile, the nucleation and crystallization time of the donor is earlier than that of the acceptors after introducing BTP-eC9, which is beneficial for obtaining a better vertical structural phase separation. The exciton dissociation, charge transport, and charge collection are promoted effectively by the optimized morphology of the active layer, which improves the short-circuit current density and filling factor. After introducing BTP-eC9, the power conversion efficiencies (PCEs) of the ternary OSCs are improved from 17.31% to 18.15%. The PCE is further improved to 18.39% by introducing gold nanopyramid (Au NBPs) into the hole transport layer to improve photon utilization efficiency. This work indicates that the morphology can be optimized by selecting a highly crystalline third component to regulate the nucleation and crystallization progress of the acceptor and donor molecules.

19.3% Efficiency ternary organic solar cells enabled by the alkyl side-chain effect of guest non-fullerene acceptors

19.3% Efficiency ternary organic solar cells enabled by the alkyl side-chain effect of guest non-fullerene acceptors

Efficient and Photostable Organic Solar Cells Achieved by Alloyed Dimer Acceptors with Tailored Linker Structures

AbstractHigh power conversion efficiency (PCE) and long‐term stability are prerequisites for commercialization of organic solar cells (OSCs). Herein, two dimer acceptors (DYTVT and DYTCVT) are developed with different properties through linker engineering, and study their effects as alloy‐like acceptors on the photovoltaic performance and photostability of OSCs. These ternary OSCs effectively combine the advantages of both dimer acceptors. DYTVT, characterized by its high backbone planarity, ensures elevated electron mobility and high glass‐transition temperature (Tg), leading to efficient charge transport and enhanced photostability of OSCs. Conversely, DYTCVT, with its significant dipole moment and electrostatic potential, enhances compatibility of the alloy acceptors with donors and refines the blend morphology, facilitating efficient charge generation in OSCs. Consequently, D18:DYTVT:DYTCVT OSCs exhibit higher PCE (18.4%) compared to D18:MYT (monomer acceptor, PCE = 16.5%), D18:DYTVT (PCE = 17.4%), and D18:DYTCVT (PCE = 17.0%) OSCs. Furthermore, owing to higher Tg of alloy acceptors (133 °C) than MYT (Tg = 80 °C) and DYTCVT (Tg = 120 °C), D18:DYTVT:DYTCVT OSCs have significantly higher photostability (t80% lifetime = 4250 h under 1‐sun illumination) compared to D18:MYT (t80% lifetime = 40 h) and D18:DYTCVT OSCs (t80% lifetime = 2910 h).

Extrapolative Machine Learning for Accurate Efficiency Prediction in Non‐Fullerene Ternary Organic Solar Cells: Leveraging Computable Molecular Descriptors in High‐Throughput Virtual Screening

Adding a third component to binary organic solar cells (OSCs) enhances ternary OSCs, boosting power conversion efficiency (PCE). However, developing and optimizing appropriate donors, acceptors, and ternary materials remains a complex and demanding task. This study presents four machine‐learning (ML) predictive models using XGBoost and ANN approaches, utilizing both experimental and DFT‐derived HOMO and LUMO levels for efficient high‐throughput virtual screening (HTVS) of top candidates based on PCE. Two distinct latent databases were employed for HTVS: one consisting of 429 413 uniquely recombined ternary OSC systems from experimentally available data, and another comprising ≈2.3 million unique donor molecules from the Harvard Clean Energy Project database (CEPDB). The four ML models demonstrated notable predictive accuracy for PCE on a test dataset containing molecules closely aligned with the training set (interpolation). However, the XGBoost model showed constrained extrapolative ability for molecules significantly divergent from those in the training dataset. In contrast, the ANN models displayed a robust extrapolative capacity in HTVS, successfully predicting new potential ternary OSC systems and leading donors with PCE values exceeding 20%. Our ML models use HOMO and LUMO inputs for donors, acceptors, and ternaries, facilitating efficient optimization via rapid HTVS of high‐performance ternary materials.

Halogenated Dibenzo[f,h]quinoxaline Units Constructed 2D-Conjugated Guest Acceptors for 19% Efficiency Organic Solar Cells.

Halogenation of Y-series small-molecule acceptors (Y-SMAs) is identified as an effective strategy to optimize photoelectric properties for achieving improved power-conversion-efficiencies (PCEs) in binary organic solar cells (OSCs). However, the effect of different halogenation in the 2D-structured large π-fused core of guest Y-SMAs on ternary OSCs has not yet been systematically studied. Herein, four 2D-conjugated Y-SMAs (X-QTP-4F, including halogen-free H-QTP-4F, chlorinated Cl-QTP-4F, brominated Br-QTP-4F, and iodinated I-QTP-4F) by attaching different halogens into 2D-conjugation extended dibenzo[f,h]quinoxaline core are developed. Among these X-QTP-4F, Cl-QTP-4F has a higher absorption coefficient, optimized molecular crystallinity and packing, suitable cascade energy levels, and complementary absorption with PM6:L8-BO host. Moreover, among ternary PM6:L8-BO:X-QTP-4F blends, PM6:L8-BO:Cl-QTP-4F obtains a more uniform and size-suitable fibrillary network morphology, improved molecular crystallinity and packing, as well as optimized vertical phase distribution, thus boosting charge generation, transport, extraction, and suppressing energy loss of OSCs. Consequently, the PM6:L8-BO:Cl-QTP-4F-based OSCs achieve a 19.0% efficiency, which is among the state-of-the-art OSCs based on 2D-conjugated Y-SMAs and superior to these devices based on PM6:L8-BO host (17.70%) and with guests of H-QTP-4F (18.23%), Br-QTP-4F (18.39%), and I-QTP-4F (17.62%). The work indicates that halogenation in 2D-structured dibenzo[f,h]quinoxaline core of Y-SMAs guests is a promising strategy to gain efficient ternary OSCs.

Alkyl chain modulation of asymmetric hexacyclic fused acceptor synergistically with wide bandgap third component for high efficiency ternary organic solar cells

Alkyl chain modulation of asymmetric hexacyclic fused acceptor synergistically with wide bandgap third component for high efficiency ternary organic solar cells

Simultaneous enhancement of photocurrent and open circuit voltage in ternary organic solar cells by red fluorescent material as third component materials

Ternary organic solar cells (OSCs) were constructed using D18-Cl:Y6 as the host photoactive layer and the red fluorescent material [4-(dicyano-methylene)-2-methyl-6-(p-dimethyl aminostyryl)-4H-pyran] (DCM) as the third component material. The optimized ternary OSCs (optimized weight ratio of D18-Cl:Y6:DCM is 1:1.4:0.1) showed a power conversion efficiency (PCE) of 17.36 %, a short-circuit current density (JSC) of 26.79 mA cm−2, an open-circuit voltage (VOC) of 0.89 V, and a fill factor (FF) of 72.8 %. Since the absorption peak of DCM is located in the red light region and the photoluminescence peak of DCM is covered by the absorption peak of D18-Cl, DCM significantly improves the short-wavelength light absorption of the optimized ternary photoactive layer and facilitates the energy transfer from DCM to D18-Cl. While increasing the DCM content, the LUMO level of the blend acceptor is shifted upwards, which favors the VOC value. However, excessive amount of DCM would damage the phase separation, bulk and surface morphology of the ternary film. The results showed that the red fluorescent material DCM has great potential as a third component material for realizing highly efficient ternary OSCs.

All chlorination strategy on end-group of guest acceptor enables 18.39 % efficiency and high VOC for ternary organic solar cells

The ternary strategy has been proven to be an effective method to improve the power conversion efficiency (PCE) of organic solar cells (OSCs). In this work, a new non-fullerene fused-ring acceptor (BTMe-8Cl) with 3,8-dimethylbenzo[b]benzo[4,5]thieno[2,3-d]thiophene (BTMe) core and all chlorination end-group (4,5,6,7-tetrachloro-1H-indene-1,3(2H)-dione) is synthesized and incorporated as a guest electron acceptor in PM6:Y6:BTMe-8Cl ternary system. The addition of BTMe-8Cl effectively improves the open-circuit voltage (VOC) of the ternary OSCs due to the higher lowestunoccupied molecular orbital (LUMO) energy level of BTMe-8Cl than that of Y6. Fine-tuning the proportion of BTMe-8Cl in ternary OSCs results in the optimal phase separations in the ternary films. Finally, an excellent PCE of 18.39 % and a VOC of 0.896 V are achieved for the ternary OSCs based on PM6:Y6:BTMe-8Cl (1:1.2:0.2). Especially, the VOC of 0.896 V is the highest value for PM6:Y6 system up to now.

Improved performance of ternary organic solar cells based on both bulk and pseudo-planar heterojunction active layer

The high photovoltaic conversion efficiency (PCE) of ternary organic solar cells (OSCs) based on PTB7-Th, PC71BM and IEICO-4F material is obtained, the short-circuit current density (J SC), fill factor (FF), and open-circuit voltage is 25.90 mA cm−2, 73.20% and 0.71 V, respectively. PCE is as high as 13.53%. It is the highest PCE of ternary OSCs based on PTB7-Th, PC71BM and IEICO-4F materials for all we know. The narrow bandgap material of IEICO-4F is deposited on PTB7-Th:PC71BM bulk heterojunction (BHJ) by layer-by-layer process. We constructed the dual bandgap active layer both BHJ and pseudo-planar heterojunction (P-PHJ), it could be defined as ternary BHJ/P-PHJ of OSCs. This type of OSCs is not only the complementary bandgap material of the active layer, but also increasing the donor/acceptor (D/A) interface. The excitons generation and collection of the device are increased leading a higher J SC and FF. The semitransparent OSCs (ST-OSCs) is prepared by varying the thickness of Ag electrode and PCE can reach 9.70%, and the average visible light transmittance and light use efficiency of ST-OSCs are improved effectively.

Ethylenedioxythiophene-Based Small Molecular Donor with Multiple Conformation Locks for Organic Solar Cells with Efficiency of 19.3 .

Ternary organic solar cells (T-OSCs) represent an efficient strategy for enhancing the performance of OSCs. Presently, the majority of high-performance T-OSCs incorporates well-established Y-acceptors or donor polymers as the third component. In this study, a novel class of conjugated small molecules has been introduced as the third component, demonstrating exceptional photovoltaic performance in T-OSCs. This innovative molecule comprises ethylenedioxythiophene (EDOT) bridge and 3-ethylrhodanine as the end group, with the EDOT unit facilitating the creation of multiple conformation locks. Consequently, the EDOT-based molecule exhibits two-dimensional charge transport, distinguishing it from the thiophene-bridged small molecule, which displays fewer conformation locks and provides one-dimensional charge transport. Furthermore, the robust electron-donating nature of EDOT imparts the small molecule with cascade energy levels relative to the electron donor and acceptor. As a result, OSCs incorporating the EDOT-based small molecule as the third component demonstrate enhanced mobilities, yielding a remarkable efficiency of 19.3 %, surpassing the efficiency of 18.7 % observed for OSCs incorporating thiophene-based small molecule as the third component. The investigations in this study underscore the excellence of EDOT as a building block for constructing conjugated materials with multiple conformation locks and high charge carrier mobilities, thereby contributing to elevated photovoltaic performance in OSCs.

An Asymmetric Coumarin-Anthracene Conjugate as Efficient Fullerene-Free Acceptor for Organic Solar Cells.

Asymmetric wide-band gap fullerene-free acceptors (FFAs) play a crucial role in organic solar cells (OSCs). Here, we designed and synthesized a simple asymmetric coumarin-anthracene conjugate named CA-CN with optical band gap of 2.1 eV in a single-step condensation reaction. Single crystal X-ray structure analysis confirms various multiple intermolecular non-covalent interactions. The molecular orbital energy levels of CA-CN estimated from cyclic voltammetry were found to be suitable for its use as an acceptor for OSCs. Binary OSCs fabricated using CA-CN as acceptor and PTB7-Th as the donor achieve a power conversion efficiency (PCE) of 11.13 %. We further demonstrate that the insertion of 20 wt % of CA-CN as a third component in ternary OSCs with PTB7-Th : DICTF as the host material achieved an impressive PCE of 14.91 %, an improvement of ~43 % compared to the PTB7-Th : DICTF binary device (10.38 %). Importantly, the ternary blend enhances the absorption coverage from 400 to 800 nm and improves the morphology of the active layer. The findings highlight the efficacy of an asymmetric design approach for FFAs, which paves the way for developing high-efficiency OSCs at low cost.

An Asymmetric Coumarin‐Anthracene Conjugate as Efficient Fullerene‐Free Acceptor for Organic Solar Cells

Asymmetric wide‐bandgap fullerene‐free acceptors (FFAs) play a crucial role in organic solar cells (OSCs). Here, we designed and synthesized a simple asymmetric coumarin‐anthracene conjugate named CA‐CN with optical bandgap of 2.1 eV in a single‐step condensation reaction. Single crystal X‐ray structure analysis confirms various multiple intermolecular non‐covalent interactions. The molecular orbital energy levels of CA‐CN estimated from cyclic voltammetry were found to be suitable for its use as an acceptor for OSCs. Binary OSCs fabricated using CA‐CN as acceptor and PTB7‐Th as the donor achieve a power conversion efficiency (PCE) of 11.13%. We further demonstrate that the insertion of 20 wt% of CA‐CN as a third component in ternary OSCs with PTB7‐Th:DICTF as the host material achieved an impressive PCE of 14.91%, an improvement of ~43% compared to the PTB7‐Th:DICTF binary device (10.38%). Importantly, the ternary blend enhances the absorption coverage from 400 to 800 nm and improves the morphology of the active layer. The findings highlight the efficacy of an asymmetric design approach for FFAs, which paves the way for developing high‐efficiency OSCs at low cost.

Advancing Integration of Direct C-H Arylation-Derived Star-Shaped Oligomers as Second Acceptors for Ternary Organic Solar Cells.

Organic solar cells (OSCs) could benefit from the ternary bulk heterojunction (BHJ), a method that allows for fine-tuning of light capture, cascade energy levels, and film shape, in order to increase their power conversion efficiency (PCE). In this work, the third components of PM6:Y6 and PM6:BTP-eC9 BHJs are a set of four star-shaped unfused ring electron acceptors (SSUFREAs), i.e., BD-IC, BFD-IC, BD-2FIC, and BFD-2FIC, that are facilely synthesized by direct C-H arylation. The four SSUFREAs all show complete complementary absorption with PM6, Y6, and BTP-eC9, which facilitates light harvesting and exciton collection. When BFD-2FIC is added as a third component, the PCEs of PM6:Y6 and PM6:BTP-eC9 binary BHJs are able to be improved from 15.31% to 16.85%, and from 16.23% to 17.23%, respectively, showing that BFD-2FIC is useful for most effective ternary OSCs in general, and increasing short circuit current (JSC) and better film morphology are two additional benefits. The ternary PM6:Y6:BFD-2FIC exhibits a 9.7% percentage of increase in PCE compared to the PM6:Y6 binary BHJ, which is one of the highest percentage increases among the reported ternary BHJs, showing the huge potential of BFD-2FIC for ternary BHJ OSCs.

A new alcohol-soluble dye-tetraphenyl porphyrin functionalized copolymer: Inside the role as a third component/cathode interlayer in halogen-free OSCs

Development and step-by-step characterizations of a novel cationic thiophene based copolymer (P1buP), including ionic phosphonium salt and dye-tetraphenylporphyrin (TPP) moiety in side chains, with an iconic property of solubility in a wide range of polar solvents is reported. Synthesized by using simple, low-cost, and straightforward procedures, the material is used to fabricate completely halogen-free (i.e., from ethanol) ternary organic solar cells (OSCs), in the presence of an alcohol-soluble ionic 3,4-dialkoxythiophene based homopolymer (P2buP) and a serinol-fullerene derivative (C60-Ser). Indeed, thanks to co-sensitization techniques, where multiple dyes harvest different parts of the solar spectrum, the power conversion efficiency of the best final device dramatically increases up to nearly 5.0%, as the light absorption is usually optimized. Additionally, since the use of a cathode interlayer in OSCs also plays a pivotal role in electron extraction and device stability, a possible application of the ionic TPP material as the interfacial layer is also investigated. Furthermore, to improve and optimize the best performing device, a successful post-metalation with Zn of the porphyrin core is carried out, and a ternary OSC (P1buP:P2buP:C60-Ser = 0.33:0.67:1 w/w) is fabricated, resulting in a photoconversion efficiency (PCE) of ∼6.0%.

Impact of PCBM as a Third Component on Optical and Electrical Properties in Ternary Organic Blends.

This paper investigates the influence of constituent weight ratios on optical and electrical properties, with a particular focus on the intrinsic properties (such as electrical mobility) of ternary organic blends, highlighting the role of a third component. The study explores novel donor:acceptor1:acceptor2 (D:A1:A2) matrix blends with photovoltaic potential, systematically adjusting the ratio of the two acceptors in the mixtures, while keeping constant the donor:acceptor weight ratio (D:A = 1:1.4). Herein, depending on this adjustment, six different samples of 100-400 nm thickness are methodically characterized. Optical analysis demonstrates the spectral complementarity of the component materials and exposes the optimal weight ratio (D:A1:A2 = 1:1:0.4) for the highest optical absorption coefficient. Atomic force microscopy (AFM) analysis reveals improved and superior morphological attributes with the addition of the third component (fullerene). In terms of the electrical mobility of charge carriers, this study finds that the sample in which A1 = A2 has the greatest recorded value [μmax=1.41×10-4cm2/(Vs)]. This thorough study on ternary organic blends reveals the crucial relationship between acceptor ratios and the properties of the final blend, highlighting the critical function of the third component in influencing the intrinsic factors such as electrical mobility, offering valuable insights for the optimization of ternary organic solar cells.

Ternary Polymer Solar Cells: Impact of Non-Fullerene Acceptors on Optical and Morphological Properties

Ternary organic solar cells contain a single three-component photoactive layer with a wide absorption window, achieved without the need for multiple stacking. However, adding a third component into a well-known binary blend can influence the energetics, optical window, charge carrier transport, crystalline order and conversion efficiency. In the form of binary blends, the low-bandgap regioregular polymer donor poly(3-hexylthiophene-2,5-diyl), known as P3HT, is combined with the acceptor PC61BM, an inexpensive fullerene derivative. Two different non-fullerene acceptors (ITIC and eh-IDTBR) are added to this binary blend to form ternary blends. A systematic comparison between binary and ternary systems was carried out as a function of the thermal annealing temperature of organic layers (100 °C and 140 °C). The power conversion efficiency (PCE) is improved due to increased fill factor (FF) and open-circuit voltage (Voc) for thermal-annealed ternary blends at 140 °C. The transport properties of electrons and holes were investigated in binary and ternary blends following a Space-Charge-Limited Current (SCLC) protocol. A favorable balanced hole–electron mobility is obtained through the incorporation of either ITIC or eh-IDTBR. The charge transport behavior is correlated with the bulk heterojunction (BHJ) morphology deduced from atomic force microscopy (AFM), contact water angle (CWA) measurement and 2D grazing-incidence X-ray diffractometry (2D-GIXRD).