Terminus Residues Research Articles

A Pore-blocking Hydrophobic Motif at the Cytoplasmic Aperture of the Closed-state Nav1.7 Channel Is Disrupted by the Erythromelalgia-associated F1449V Mutation

Sodium channel Na(v)1.7 has recently elicited considerable interest as a key contributor to human pain. Gain-of-function mutations of Na(v)1.7 produce painful disorders, whereas loss-of-function Na(v)1.7 mutations produce insensitivity to pain. The inherited erythromelalgia Na(v)1.7/F1449V mutation, within the C terminus of domain III/transmembrane helix S6, shifts channel activation by -7.2 mV and accelerates time to peak, leading to nociceptor hyperexcitability. We constructed a homology model of Na(v)1.7, based on the KcsA potassium channel crystal structure, which identifies four phylogenetically conserved aromatic residues that correspond to DIII/F1449 at the C-terminal end of each of the four S6 helices. The model predicted that changes in side-chain size of residue 1449 alter the pore's cytoplasmic aperture diameter and reshape inter-domain contact surfaces that contribute to closed state stabilization. To test this hypothesis, we compared activation of wild-type and mutant Na(v)1.7 channels F1449V/L/Y/W by whole cell patch clamp analysis. All but the F1449V mutation conserve the voltage dependence of activation. Compared with wild type, time to peak was shorter in F1449V, similar in F1449L, but longer for F1449Y and F1449W, suggesting that a bulky, hydrophobic residue is necessary for normal activation. We also substituted the corresponding aromatic residue of S6 in each domain individually with valine, to mimic the naturally occurring Na(v)1.7 mutation. We show that DII/F960V and DIII/F1449V, but not DI/Y405V or DIV/F1752V, regulate Na(v)1.7 activation, consistent with well established conformational changes in DII and DIII. We propose that the four aromatic residues contribute to the gate at the cytoplasmic pore aperture, and that their ring side chains form a hydrophobic plug which stabilizes the closed state of Na(v)1.7.

Role of the acidic hirudin-like COOH-terminal amino acid region of factor Va heavy chain in the enhanced function of prothrombinase.

Prothrombinase activates prothrombin through initial cleavage at Arg320 followed by cleavage at Arg271. This pathway is characterized by the generation of an enzymatically active, transient intermediate, meizothrombin, that has increased chromogenic substrate activity but poor clotting activity. The heavy chain of factor Va contains an acidic region at the COOH terminus (residues 680−709). We have shown that a pentapeptide from this region (DYDYQ) inhibits prothrombin activation by prothrombinase by inhibiting meizothrombin generation. To ascertain the function of these regions, we have created a mutant recombinant factor V molecule that is missing the last 30 amino acids from the heavy chain (factor VΔ680−709) and a mutant molecule with the 695DYDY698 → AAAA substitutions (factor V4A). The clotting activities of both recombinant mutant factor Va molecules were impaired compared to the clotting activity of wild-type factor Va (factor VaWt). Using an assay employing purified reagents, we found that prothrombinase assembled with factor VaΔ680−709 displayed an ∼39% increase in kcat, while prothrombinase assembled with factor Va4A exhibited an ∼20% increase in kcat for the activation of prothrombin as compared to prothrombinase assembled with factor VaWt. Gel electrophoresis analyzing prothrombin activation by prothrombinase assembled with the mutant molecules revealed a delay in prothrombin activation with persistence of meizothrombin. Our data demonstrate that the COOH-terminal region of factor Va heavy chain is indeed crucial for coordinated prothrombin activation by prothrombinase because it regulates meizothrombin cleavage at Arg271 and suggest that this portion of factor Va is partially responsible for the enhanced procoagulant function of prothrombinase.

Structural Basis for the Recognition of Histone H4 by the Histone-Chaperone RbAp46

SummaryRbAp46 and RbAp48 (pRB-associated proteins p46 and p48, also known as RBBP7 and RBBP4, respectively) are highly homologous histone chaperones that play key roles in establishing and maintaining chromatin structure. We report here the crystal structure of human RbAp46 bound to histone H4. RbAp46 folds into a seven-bladed β propeller structure and binds histone H4 in a groove formed between an N-terminal α helix and an extended loop inserted into blade six. Surprisingly, histone H4 adopts a different conformation when interacting with RbAp46 than it does in either the nucleosome or in the complex with ASF1, another histone chaperone. Our structural and biochemical results suggest that when a histone H3/H4 dimer (or tetramer) binds to RbAp46 or RbAp48, helix 1 of histone H4 unfolds to interact with the histone chaperone. We discuss the implications of our findings for the assembly and function of RbAp46 and RbAp48 complexes.

Regulation of TIP60 by ATF2 Modulates ATM Activation

TIP60 (HTATIP) is a histone acetyltransferase (HAT) whose function is critical in regulating ataxia-telangiectasia mutated (ATM) activation, gene expression, and chromatin acetylation in DNA repair. Here we show that under non-stressed conditions, activating transcription factor-2 (ATF2) in cooperation with Cul3 ubiquitin ligase promotes degradation of TIP60, thereby attenuating its HAT activity. Inhibiting either ATF2 or Cul3 expression by small interfering RNA stabilizes the TIP60 protein. ATF2 association with TIP60 on chromatin is decreased following exposure to ionizing radiation (IR), resulting in enhanced TIP60 stability and activity. We also identified a panel of melanoma and prostate cancer cell lines whose ATF2 expression is inversely correlated with TIP60 levels and ATM activation after IR. Inhibition of ATF2 expression in these lines restored TIP60 protein levels and both basal and IR-induced levels of ATM activity. Our study provides novel insight into regulation of ATM activation by ATF2-dependent control of TIP60 stability and activity.

The Crystal Structure of Pectate Lyase PelI from Soft Rot Pathogen Erwinia chrysanthemi in Complex with Its Substrate

The crystallographic structure of the family 3 polysaccharide lyase (PL-3) PelI from Erwinia chrysanthemi has been solved to 1.45 A resolution. It consists of an N-terminal domain harboring a fibronectin type III fold linked to a catalytic domain displaying a parallel beta-helix topology. The N-terminal domain is located away from the active site and is not involved in the catalytic process. After secretion in planta, the two domains are separated by E. chrysanthemi proteases. This event turns on the hypersensitive response of the host. The structure of the single catalytic domain determined to 2.1 A resolution shows that the domain separation unveils a "Velcro"-like motif of asparagines, which might be recognized by a plant receptor. The structure of PelI in complex with its substrate, a tetragalacturonate, has been solved to 2.3 A resolution. The sugar binds from subsites -2 to +2 in one monomer of the asymmetric unit, although it lies on subsites -1 to +3 in the other. These two "Michaelis complexes" have never been observed simultaneously before and are consistent with the dual mode of bond cleavage in this substrate. The bound sugar adopts a mixed 2(1) and 3(1) helical conformation similar to that reported in inactive mutants from families PL-1 and PL-10. However, our study suggests that the catalytic base in PelI is not a conventional arginine but a lysine as proposed in family PL-9.

Comparison of Apo- and Heme-bound Crystal Structures of a Truncated Human Heme Oxygenase-2

Heme oxygenase (HO) catalyzes the first step in the heme degradation pathway. The crystal structures of apo- and heme-bound truncated human HO-2 reveal a primarily alpha-helical architecture similar to that of human HO-1 and other known HOs. Proper orientation of heme in HO-2 is required for the regioselective oxidation of the alpha-mesocarbon. This is accomplished by interactions within the heme binding pocket, which is made up of two helices. The iron coordinating residue, His(45), resides on the proximal helix. The distal helix contains highly conserved glycine residues that allow the helix to flex and interact with the bound heme. Tyr(154), Lys(199), and Arg(203) orient the heme through direct interactions with the heme propionates. The rearrangements of side chains in heme-bound HO-2 compared with apoHO-2 further elucidate HO-2 heme interactions.

A Motif in the Clathrin Heavy Chain Required for the Hsc70/Auxilin Uncoating Reaction

The 70-kDa heat-shock cognate protein (Hsc70) chaperone is an ATP-dependent "disassembly enzyme" for many subcellular structures, including clathrin-coated vesicles where it functions as an uncoating ATPase. Hsc70, and its cochaperone auxilin together catalyze coat disassembly. Like other members of the Hsp70 chaperone family, it is thought that ATP-bound Hsc70 recognizes the clathrin triskelion through an unfolded exposed hydrophobic segment. The best candidate is the unstructured C terminus (residues 1631-1675) of the heavy chain at the foot of the tripod below the hub, containing the sequence motif QLMLT, closely related to the sequence bound preferentially by the substrate groove of Hsc70 (Fotin et al., 2004b). To test this hypothesis, we generated in insect cells recombinant mammalian triskelions that in vitro form clathrin cages and clathrin/AP-2 coats exactly like those assembled from native clathrin. We show that coats assembled from recombinant clathrin are good substrates for ATP- and auxilin-dependent, Hsc70-catalyzed uncoating. Finally, we show that this uncoating reaction proceeds normally when the coats contain recombinant heavy chains truncated C-terminal to the QLMLT motif, but very inefficiently when the motif is absent. Thus, the QLMLT motif is required for Hsc-70-facilitated uncoating, consistent with the proposal that this sequence is a specific target of the chaperone.

Structure of Compstatin in Complex with Complement Component C3c Reveals a New Mechanism of Complement Inhibition

Undesired complement activation is a major cause of tissue injury in various pathological conditions and contributes to several immune complex diseases. Compstatin, a 13-residue peptide, is an effective inhibitor of the activation of complement component C3 and thus blocks a central and crucial step in the complement cascade. The precise binding site on C3, the structure in the bound form, and the exact mode of action of compstatin are unknown. Here we present the crystal structure of compstatin in complex with C3c, a major proteolytic fragment of C3. The structure reveals that the compstatin-binding site is formed by the macroglobulin (MG) domains 4 and 5. This binding site is part of the structurally stable MG-ring formed by domains MG 1-6 and is far away from any other known binding site on C3. Compstatin does not alter the conformation of C3c, whereas compstatin itself undergoes a large conformational change upon binding. We propose a model in which compstatin sterically hinders the access of the substrate C3 to the convertase complexes, thus blocking complement activation and amplification. These insights are instrumental for further development of compstatin as a potential therapeutic.

HC-Pro Protein of Potato Virus Y Can Interact with Three Arabidopsis 20S Proteasome Subunits In Planta

The multifunctional protein helper component proteinase (HC-Pro) is thought to interfere with the activity of the 20S proteasome; however, no sites of interaction have been identified for either protein. Here, we first show that the Potato virus Y (PVY) HC-Pro protein can interact with three Arabidopsis 20S proteasome subunits (PAA, PBB, and PBE), using a yeast two-hybrid system and the bimolecular fluorescence complement assay. In addition, yeast two-hybrid analysis of the interaction between several mutant subunits of the 20S proteasome and PVY HC-Pro confirmed that residues 81 to 140 of PAA, 1 to 80 of PBB, and 160 to 274 of PBE are necessary for binding PAA, PBB, and PBE to PVY HC-Pro, respectively. Deletion mutant analysis of PVY HC-Pro showed that the N terminus (residues 1 to 97) is necessary for its interaction with three Arabidopsis 20S proteasome subunits. The ability of HC-Pro to interact and interfere with the activity of the 20S proteasome may help explain the molecular basis of its multifunctional character.

Small Ubiquitin-like Modifier Modification Regulates the DNA Binding Activity of Glial Cell Missing Drosophila Homolog a

Glial cell missing Drosophila homolog a (GCMa) is an essential transcription factor for placental development, which controls the differentiation of the syncytiotrophoblast layer. Although the activity of GCMa can be post-translationally regulated by protein phosphorylation, ubiquitination, and acetylation, it is unknown whether GCMa activity can be regulated by sumoylation. In this report, we investigated the role of sumoylation in the regulation of GCMa activity. We demonstrated that Ubc9, the E2 component of the sumoylation machinery, specifically interacts with the N-terminal domain of GCMa and promotes GCMa sumoylation on lysine 156. Moreover, GCMa-mediated transcriptional activation was repressed by sumoylation but was enhanced in the presence of the SUMO-specific protease, SENP1. The repressive effect of sumoylation on GCMa transcriptional activity was attributed to decreased DNA binding activity of GCMa. Furthermore, structural analysis revealed a steric clash between the SUMO1 moiety of sumoylated GCMa and the DNA-binding surfaces of GCMa, which may destabilize the interaction between GCMa and its cognate DNA sequence. Our study demonstrates that GCMa is a new sumoylation substrate and its activity is down-regulated by sumoylation.

The Host Immune Regulator Factor H Interacts via Two Contact Sites with the PspC Protein of Streptococcus pneumoniae and Mediates Adhesion to Host Epithelial Cells

Pneumococcal surface protein C (PspC) of Streptococcus pneumoniae is a key virulence factor that mediates adhesion to host cells and immune evasion of the host complement. PspC binds the host immune and complement regulator factor H, which is composed of 20 short consensus repeats (SCR). This interaction contributes to pneumococcal virulence. In this study, we identified within the factor H protein two separate PspC binding regions, which were localized to SCR8-11 and SCR19-20, by using recombinant factor H deletion constructs for Western blotting assays and surface plasmon resonance studies. A detailed analysis of binding epitopes in these SCR by peptide spot arrays identified several linear binding regions within the sequences of SCR8-11 and SCR19-20. In addition, the factor H binding site was mapped within the pneumococcal PspC protein to a 121-aa-long stretch positioned in the N terminus (residues 38-158). Factor H attached to the surface of pneumococci via PspC significantly enhanced pneumococcal adherence to host epithelial and endothelial cells. This adhesion was specific and was blocked with a truncated N-terminal factor H-binding fragment of PspC. In conclusion, the acquisition of factor H by pneumococci via PspC occurs via two contact sites located in SCR8-11 and SCR19-20, and factor H attached to the surface of the pneumococcus promotes adhesion to both host epithelial and endothelial cells.

A Novel TRAF6 Binding Site in MALT1 Defines Distinct Mechanisms of NF-κB Activation by API2·MALT1 Fusions

The recurrent translocation t(11;18)(q21;q21) associated with mucosa-associated lymphoid tissue (MALT) lymphoma results in the expression of an API2.MALT1 fusion protein that constitutively activates NF-kappaB. The first baculovirus IAP repeat (BIR) domain of API2 and the C terminus of MALT1, which contains its caspase-like domain, are present in all reported fusion variants and interact with TRAF2 and TRAF6, respectively, suggesting their contribution to NF-kappaB signaling by API2.MALT1. Also, the involvement of BCL10 has been suggested via binding to BIR1 of API2 and via its interaction with the immunoglobulin domains of MALT1, present in half of the fusion variants. However, conflicting reports exist concerning their roles in API2.MALT1-induced NF-kappaB signaling. In this report, streptavidin pulldowns of biotinylated API2.MALT1 fusion variants showed that none of the fusion variants interacted with endogenous BCL10; its role in NF-kappaB signaling by API2.MALT1 was further questioned by RNA interference experiments. In contrast, TRAF6 was essential for NF-kappaB activation by all fusion variants, and we identified a novel TRAF6 binding site in the second immunoglobulin domain of MALT1, which enhanced NF-kappaB activation when present in the fusion protein. Furthermore, inclusion of both immunoglobulin domains in API2.MALT1 further enhanced NF-kappaB signaling via intramolecular TRAF6 activation. Finally, binding of TRAF2 to BIR1 contributed to NF-kappaB activation by API2.MALT1, although additional mechanisms involving BIR1-mediated raft association are also important. Taken together, these data reveal distinct mechanisms of NF-kappaB activation by the different API2.MALT1 fusion variants with an essential role for TRAF6.

Electron Paramagnetic Resonance Spectroscopy of Site-directed Spin Labels Reveals the Structural Heterogeneity in the N-terminal Domain of ApoA-I in Solution

Apolipoprotein A-I (apoA-I) is the major protein constituent of high density lipoprotein (HDL) and plays a central role in phospholipid and cholesterol metabolism. This 243-residue long protein is remarkably flexible and assumes numerous lipid-dependent conformations. Consequently, definitive structural determination of lipid-free apoA-I in solution has been difficult. Using electron paramagnetic spectroscopy of site-directed spin labels in the N-terminal domain of apoA-I (residues 1-98) we have mapped a mixture of secondary structural elements, the composition of which is consistent with findings from other in-solution methods. Based on side chain mobility and their accessibility to polar and non-polar spin relaxers, the precise location of secondary elements for amino acids 14-98 was determined for both lipid-free and lipid-bound apoA-I. Based on intermolecular dipolar coupling at positions 26, 44, and 64, these secondary structural elements were arranged into a tertiary fold to generate a structural model for lipid-free apoA-I in solution.

A novelAmoeba proteus120 kDa actin-binding protein with only 1 filamin repeat and a coiled-coil region

A novel 120 kDa actin-binding protein (ApABP-F1) was found in Amoeba proteus. It was distributed throughout the cytoplasm, mainly in the subplasma membrane and perinuclear-nuclear areas, enriched in actin. The full-length cDNA of ApABP consisted of 2672 nucleotides with an open reading frame of 878 amino acids, giving a ~95 kDa protein with a theoretical pI value of 5.11. It had a novel domain organization pattern: the N terminus (residues 1-104) contained 1 calponin-homology (CH) domain, followed by only 1 region that was homologous to the filamin repeat (FR, residues 209-324), and a central region (residues 344-577) exhibiting a very high probability of coiled-coil formation, probably engaged in the observed protein dimerization. A phylogenetic tree constructed for CH domains from 25 various proteins revealed that the CH domain of ApABP was most related to that of the hypothetical mouse KIAA0903-like protein, whereas not much relationship to either filamins or the gelation factor (ABP-120) of Dictyostelium discoideum and Entamoeba histolytica was found.

A tale of two tails: why are terminal residues of proteins exposed?

It is widely known that terminal residues of proteins (i.e. the N- and C-termini) are predominantly located on the surface of proteins and exposed to the solvent. However, there is no good explanation as to the forces driving this phenomenon. The common explanation that terminal residues are charged, and charged residues prefer to be on the surface, cannot explain the magnitude of the phenomenon. Here, we survey a large number of proteins from the PDB in order to explore, quantitatively, this phenomenon, and then we use a lattice model to study the mechanisms involved. The location of the termini was examined for 425 small monomeric proteins (50-200 amino acids) and it was found that the average solvent accessibility of termini residues is 87.1% compared with 49.2% of charged residues and 35.9% of all residues. Using a cutoff of 50% of the maximal possible exposure, 80.3% of the N-terminal and 86.1% of the C-terminal residues are exposed compared to 32% for all residues. In addition, terminal residues are much more distant from the center of mass of their proteins than other residues. Using a 2D lattice, a large population of model proteins was studied on three levels: structural selection of compact structures, thermodynamic selection of conformations with a pronounced energy gap and kinetic selection of fast folding proteins using Monte-Carlo simulations. Progressively, each selection raises the proportion of proteins with termini on the surface, resulting in similar proportions to those observed for real proteins.

Crystal Structure of the γ-Glutamyltranspeptidase Precursor Protein from Escherichia coli: STRUCTURAL CHANGES UPON AUTOCATALYTIC PROCESSING AND IMPLICATIONS FOR THE MATURATION MECHANISM

Gamma-glutamyltranspeptidase (GGT) is an extracellular enzyme that plays a key role in glutathione metabolism. The mature GGT is a heterodimer consisting of L- and S-subunits that is generated by posttranslational cleavage of the peptide bond between Gln-390 and Thr-391 in the precursor protein. Thr-391, which becomes the N-terminal residue of the S-subunit, acts as the active residue in the catalytic reaction. The crystal structure of a mutant GGT, T391A, that is unable to undergo autocatalytic processing, has been determined at 2.55-A resolution. Structural comparison of the precursor protein and mature GGT demonstrates that the structures of the core regions in the two proteins are unchanged, but marked differences are found near the active site. In particular, in the precursor, the segment corresponding to the C-terminal region of the L-subunit occupies the site where the loop (residues 438-449) forms the lid of the gamma-glutamyl group-binding pocket in the mature GGT. This result demonstrates that, upon cleavage of the N-terminal peptide bond of Thr-391, the newly produced C terminus (residues 375-390) flips out, allowing the 438-449 segment to form the gamma-glutamyl group-binding pocket. The electron density map for the T391A protein also identified a water molecule near the carbonyl carbon atom of Gln-390. The spatial arrangement around the water and Thr-391 relative to the scissile peptide bond appears suitable for the initiation of autocatalytic processing, as in other members of the N-terminal nucleophile hydrolase superfamily.

Ligand-induced Structural Changes of the CD44 Hyaluronan-binding Domain Revealed by NMR

CD44, a major cell surface receptor for hyaluronan (HA), contains a functional domain responsible for HA binding at its N terminus (residues 21-178). Accumulating evidence indicates that proteolytic cleavage of CD44 in its extracellular region (residues 21-268) leads to enhanced tumor cell migration and invasion. Hence, understanding the mechanisms underlying the CD44 proteolytic cleavage is important for understanding the mechanism of CD44-mediated tumor progression. Here we present the NMR structure of the HA-binding domain of CD44 in its HA-bound state. The structure is composed of the Link module (residues 32-124) and an extended lobe (residues 21-31 and 125-152). Interestingly, a comparison of its unbound and HA-bound structures revealed that rearrangement of the beta-strands in the extended lobe (residues 143-148) and disorder of the structure in the following C-terminal region (residues 153-169) occurred upon HA binding, which is consistent with the results of trypsin proteolysis studies of the CD44 HA-binding domain. The order-to-disorder transition of the C-terminal region by HA binding may be involved in the CD44-mediated cell migration.

A Catalytic Mechanism Revealed by the Crystal Structures of the Imidazolonepropionase from Bacillus subtilis

Imidazolonepropionase (EC 3.5.2.7) catalyzes the third step in the universal histidine degradation pathway, hydrolyzing the carbon-nitrogen bonds in 4-imidazolone-5-propionic acid to yield N-formimino-l-glutamic acid. Here we report the crystal structures of the Bacillus subtilis imidazolonepropionase and its complex at 2.0-A resolution with substrate analog imidazole-4-acetic acid sodium (I4AA). The structure of the native enzyme contains two domains, a TIM (triose-phosphate isomerase) barrel domain with two insertions and a small beta-sandwich domain. The TIM barrel domain is quite similar to the members of the alpha/beta barrel metallo-dependent hydrolase superfamily, especially to Escherichia coli cytosine deaminase. A metal ion was found in the central cavity of the TIM barrel and was tightly coordinated to residues His-80, His-82, His-249, Asp-324, and a water molecule. X-ray fluorescence scan analysis confirmed that the bound metal ion was a zinc ion. An acetate ion, 6 A away from the zinc ion, was also found in the potential active site. In the complex structure with I4AA, a substrate analog, I4AA replaced the acetate ion and contacted with Arg-89, Try-102, Tyr-152, His-185, and Glu-252, further defining and confirming the active site. The detailed structural studies allowed us to propose a zinc-activated nucleophilic attack mechanism for the hydrolysis reaction catalyzed by the enzyme.

Minimum Length Requirement of the Flexible N-Terminal Translocation Subdomain of Colicin E3

The 315-residue N-terminal T domain of colicin E3 functions in translocation of the colicin across the outer membrane through its interaction with outer membrane proteins including the OmpF porin. The first 83 residues of the T domain are known from structure studies to be disordered. This flexible translocation subdomain contains the TolB box (residues 34 to 46) that must cross the outer membrane in an early translocation event, allowing the colicin to bind to the TolB protein in the periplasm. In the present study, it was found that cytotoxicity of the colicin requires a minimum length of 19 to 23 residues between the C terminus (residue 46) of the TolB box and the end of the flexible subdomain (residue 83). Colicin E3 molecules of sufficient length display normal binding to TolB and occlusion of OmpF channels in vitro. The length of the N-terminal subdomain is critical because it allows the TolB box to cross the outer membrane and interact with TolB. It is proposed that the length constraint is a consequence of ordered structure in the downstream segment of the T domain (residues 84 to 315) that prevents its insertion through the outer membrane via a translocation pore that includes OmpF.

Functional Characterization of PmHS1, a Pasteurella multocida Heparosan Synthase

Heparosan synthase 1 (PmHS1) from Pasteurella multocida Type D is a dual action glycosyltransferase enzyme that transfers monosaccharide units from uridine diphospho (UDP) sugar precursors to form the polysaccharide heparosan (N-acetylheparosan), which is composed of alternating (-alpha4-GlcNAc-beta1,4-GlcUA-1-) repeats. We have used molecular genetic means to remove regions nonessential for catalytic activity from the amino- and the carboxyl-terminal regions as well as characterized the functional regions involved in GlcUA-transferase activity and in GlcNAc-transferase activity. Mutation of either one of the two regions containing aspartate-X-aspartate (DXD) residue-containing motifs resulted in complete or substantial loss of heparosan polymerizing activity. However, certain mutant proteins retained only GlcUA-transferase activity while some constructs possessed only GlcNAc-transferase activity. Therefore, it appears that the PmHS1 polypeptide is composed of two types of glycosyltransferases in a single polypeptide as was found for the Pasteurella multocida Type A PmHAS, the hyaluronan synthase that makes the alternating (-beta3-GlcNAc-beta1,4-GlcUA-1-) polymer. However, there is low amino acid similarity between the PmHAS and PmHS1 enzymes, and the relative placement of the GlcUA-transferase and GlcNAc-transferase domains within the two polypeptides is reversed. Even though the monosaccharide compositions of hyaluronan and heparosan are identical, such differences in the sequences of the catalysts are expected because the PmHAS employs only inverting sugar transfer mechanisms whereas PmHS1 requires both retaining and inverting mechanisms.