Terminal Inverted Repeat Sequences Research Articles

Baculoviral Vector-Mediated Transient and Stable Transgene Expression in Human Embryonic Stem Cells

Human embryonic stem (hES) cells as a renewable cell source have great prospective applications in both developmental biology research and regenerative medicine. To realize these potentials, the development of effective and safe genetic manipulation methods in hES cells is an obvious demand. We report here that baculoviral vectors were able to transduce hES cells efficiently. In transient transduction experiments, a recombinant baculoviral vector equipped with a human elongation factor 1-alpha promoter and a woodchuck hepatitis post-transcriptional regulatory element transduced up to 80% of cells in hES cell clumps and embryoid bodies. For prolonged transgene expression, hybrid baculoviral vectors that have incorporated a rep gene and inverted terminal repeat sequences from adeno-associated virus were produced. These hybrid vectors yielded stable transgene expression during the prolonged undifferentiated proliferation of hES cells and after differentiation. Baculoviral transduction did not affect the normal growth, phenotype, and pluripotency of hES cells. Thus, baculoviral vectors suitable for both transient overexpression and long-term stable expression are an attractive option for genetic manipulation of hES cells.

Upstream AP1- and CREB-Binding Sites Confer High Basal Activity on the Adeno-Associated Virus Type 5 Capsid Gene Promoter

In contrast to the prototype adeno-associated virus type 2 (AAV2), the capsid gene P41 promoter of AAV5, within viral constructs that lack inverted terminal repeat sequences, displays a high basal level of expression in 293 cells in the absence of coinfecting adenovirus. Here we demonstrate that this was due to differences in the relative strengths of the core promoter elements and to the presence of active binding sites for the transcription factors CREB and AP1 within the upstream region of P41 that are absent from the AAV2 capsid gene promoter P40. These differences also governed the relative basal activity of the AAV capsid gene promoters within near-full-length viral genomes.

Emergence of two types of nondechlorinating variants in the tetrachloroethene-halorespiring Desulfitobacterium sp. strain Y51

Desulfitobacterium sp. strain Y51 exhibits a strong dechlorinating activity for tetrachloroethene (PCE), converting it to cis-1,2-dichloroethene via trichloroethene by the action of the PceA reductive dehalogenase (encoded by pceA). The gene organization around the pceA gene cluster was determined to be in the following order: orf4, orf3, ISDesp1, pceA-B-C-T-mcpA, and ISDesp2, where the pceA gene cluster is surrounded by two nearly identical copies of the ISDesp insertion sequence. Serial subculture of strain Y51 gave rise to variants that abolished the PCE-dechlorination activity. Southern hybridization analysis revealed two types of variants termed small deletion (SD) and large deletion (LD). The characterization of both variants revealed a genetic rearrangement around the pceAB gene cluster. In variant SD, ISDesp1 comprised of 1,572 bp was deleted, which includes the tnpAa encoding IS256 family transposase and unknown orf1. The ISDesp1 contained the inverted terminal repeat sequence and a -35 promoter stretch just upstream of the pceA gene, indicating that this IS element is involved in the formation of the variant SD. Loss of the pceA transcription changed the variant SD to the PCE-nondechlorinating phenotype. The variant LD lost the 6.5-kb region, including one copy of ISDesp and the pceABCT-mcpA gene cluster, confirming that the homologous recombination is associated with the emergence of this variant.

His1 and His2 are distantly related, spindle-shaped haloviruses belonging to the novel virus group, Salterprovirus

Spindle-shaped viruses are a dominant morphotype in hypersaline waters but their molecular characteristics and their relationship to other archaeal viruses have not been determined. Here, we describe the isolation, characteristics and genome sequence of His2, a spindle-shaped halovirus, and compare it to the previously reported halovirus His1. Their particle dimensions, host-ranges and buoyant densities were found to be similar but they differed in their stabilities to raised temperature, low salinity and chloroform. The genomes of both viruses were linear dsDNA, of similar size (His1, 14,464 bp; His2, 16,067 bp) and mol% G + C (∼40%), with long, inverted terminal repeat sequences. The genomic termini of both viruses are likely to possess bound proteins. They shared little nucleotide similarity and, except for their putative DNA polymerase ORFs, no significant similarity at the predicted protein level. A few of the 35 predicted ORFs of both viruses showed significant matches to sequences in GenBank, and these were always to proteins of haloarchaea. Their DNA polymerases showed 42% aa identity, and belonged to the type B group of replicases that use protein-priming. Purified His2 particles were composed of four main proteins (62, 36, 28 and 21 kDa) and the gene for the major capsid protein was identified. Hypothetical proteins similar to His2 VP1 are present in four haloarchaeal genomes but are not part of complete prophages. This, and other evidence, suggests a high frequency of recombination between haloviruses and their hosts. His1 and His2 are unlike fuselloviruses and have been placed in a new virus group, Salterprovirus.

Scalable Generation of High-Titer Recombinant Adeno-Associated Virus Type 5 in Insect Cells

We established a method for production of recombinant adeno-associated virus type 5 (rAAV5) in insect cells by use of baculovirus expression vectors. One baculovirus harbors a transgene between the inverted terminal repeat sequences of type 5, and the second expresses Rep78 and Rep52. Interestingly, the replacement of type 5 Rep52 with type 1 Rep52 generated four times more rAAV5 particles. We replaced the N-terminal portion of type 5 VP1 with the equivalent portion of type 2 to generate infectious AAV5 particles. The rAAV5 with the modified VP1 required alpha2-3 sialic acid for transduction, as revealed by a competition experiment with an analog of alpha2-3 sialic acid. rAAV5-GFP/Neo with a 4.4-kb vector genome produced in HEK293 cells or Sf9 cells transduced COS cells with similar efficiencies. Surprisingly, Sf9-produced humanized Renilla green fluorescent protein (hGFP) vector with a 2.4-kb vector genome induced stronger GFP expression than the 293-produced one. Transduction of murine skeletal muscles with Sf9-generated rAAV5 with a 3.4-kb vector genome carrying a human secreted alkaline phosphatase (SEAP) expression cassette induced levels of SEAP more than 30 times higher than those for 293-produced vector 1 week after injection. Analysis of virion DNA revealed that in addition to a 2.4- or 3.4-kb single-stranded vector genome, Sf9-rAAV5 had more-abundant forms of approximately 4.7 kb, which appeared to correspond to the monomer duplex form of hGFP vector or truncated monomer duplex SEAP vector DNA. These results indicated that rAAV5 can be generated in insect cells, although the difference in incorporated virion DNA may induce different expression patterns of the transgene.

Characterization of Adeno-Associated Virus Genomes Isolated from Human Tissues

Infection with wild-type adeno-associated virus (AAV) is common in humans, but very little is known about the in vivo biology of AAV. On a molecular level, it has been shown in cultured cells that AAV integrates in a site-specific manner on human chromosome 19, but this has never been demonstrated directly in infected human tissues. To that end, we tested 175 tissue samples for the presence of AAV DNA, and when present, examined the specific form of the viral DNA. AAV was detected in 7 of 101 tonsil-adenoid samples and in 2 of 74 other tissue samples (spleen and lung). In these nine samples, we were unable to detect AAV integration in the AAVS1 locus using a sensitive PCR assay designed to amplify specific viral-cellular DNA junctions. Additionally, we used a second complementary assay, linear amplification-mediated-PCR (LAM-PCR) to widen our search for integration events. Analysis of individual LAM-PCR products revealed that the AAV genomes were arranged predominantly in a head-to-tail array, with deletions and extensive rearrangements in the inverted terminal repeat sequences. A single AAV-cellular junction was identified from a tonsil sample and it mapped to a highly repetitive satellite DNA element on chromosome 1. Given these data, we entertained the possibility that instead of integrated forms, AAV genomes were present as extrachromosomal forms. We used a novel amplification assay (linear rolling-circle amplification) to show that the majority of wild-type AAV DNA existed as circular double-stranded episomes in our tissues. Thus, following naturally acquired infection, AAV DNA can persist mainly as circular episomes in human tissues. These findings are consistent with the circular episomal forms of recombinant AAV vectors that have been isolated and characterized from in vivo transduced tissues.

Identification of Novel Non-autonomous CemaT Transposable Elements and Evidence of their Mobility within the C. elegans Genome

We describe here two new transposable elements, CemaT4 and CemaT5, that were identified within the sequenced genome of Caenorhabditis elegans using homology based searches. Five variants of CemaT4 were found, all non-autonomous and sharing 26 bp inverted terminal repeats (ITRs) and segments (152-367 bp) of sequence with similarity to the CemaT1 transposon of C. elegans. Sixteen copies of a short, 30 bp repetitive sequence, comprised entirely of an inverted repeat of the first 15 bp of CemaT4's ITR, were also found, each flanked by TA dinucleotide duplications, which are hallmarks of target site duplications of mariner-Tc transposon transpositions. The CemaT5 transposable element had no similarity to maT elements, except for sharing identical ITR sequences with CemaT3. We provide evidence that CemaT5 and CemaT3 are capable of excising from the C. elegans genome, despite neither transposon being capable of encoding a functional transposase enzyme. Presumably, these two transposons are cross-mobilised by an autonomous transposon that recognises their shared ITRs. The excisions of these and other non-autonomous elements may provide opportunities for abortive gap repair to create internal deletions and/or insert novel sequence within these transposons. The influence of non-autonomous element mobility and structural diversity on genome variation is discussed.

Characterization of Stowaway MITEs in pea (Pisum sativum L.) and identification of their potential master elements.

We have investigated miniature inverted-repeat transposable elements (MITEs) of the Stowaway family and corresponding Mariner-like master elements that could potentially facilitate their mobilization in the genome of the garden pea (Pisum sativum L.). The population of pea Stowaway MITEs consists of 103-104 copies dispersed in the genome. Judging from a sequence analysis of 17 isolated Stowaway elements and their flanking genomic regions, the elements are relatively uniform in size and sequence and occur in the vicinity of genes as well as within repetitive sequences. Insertional polymorphism of several elements was detected among various Pisum accessions, suggesting they were still transpositionally active during diversification of these taxa. The identification of several Mariner-like elements (MLEs) harboring intact open reading frames, capable of encoding a transposase, further supports a recent mobilization of the Stowaway elements. Using transposase-coding sequences as a hybridization probe, we estimated that there are about 50 MLE sequences in the pea genome. Among the 5 elements sequenced, 3 distinct subfamilies showing mutual similarities within their transposase-coding regions, but otherwise diverged in sequence, were distinguished and designated as Psmar-1 to Psmar-3. The terminal inverted repeats (TIRs) of these MLE subfamilies differed in their homology to the TIRs of Stowaway MITEs. The homlogy ranged from 9 bp in Psmar-3 to 30 bp in Psmar-1, which corresponds to the complete Stowaway TIR sequence. Based on this feature, the Psmar-1 elements are believed to be the most likely candidates for the master elements of the Stowaway MITEs in pea.

An unusual Tn21-like transposon containing an ars operon is present in highly arsenic-resistant strains of the biomining bacterium Acidithiobacillus caldus

A transposon, TnAtcArs, that carries a set of arsenic-resistance genes was isolated from a strain of the moderately thermophilic, sulfur-oxidizing, biomining bacterium Acidithiobacillus caldus. This strain originated from a commercial plant used for the bio-oxidation of gold-bearing arsenopyrite concentrates. Continuous selection for arsenic resistance over many years had made the bacterium resistant to high concentrations of arsenic. Sequence analysis indicated that TnAtcArs is 12 444 bp in length and has 40 bp terminal inverted repeat sequences and divergently transcribed resolvase and transposase genes that are related to the Tn21-transposon subfamily. A series of genes consisting of arsR, two tandem copies of arsA and arsD, two ORFs (7 and 8) and arsB is situated between the resolvase and transposase genes. Although some commercial strains of At. caldus contained the arsDA duplication, when transformed into Escherichia coli, the arsDA duplication was unstable and was frequently lost during cultivation or if a plasmid containing TnAtcArs was conjugated into a recipient strain. TnAtcArs conferred resistance to arsenite and arsenate upon E. coli cells. Deletion of one copy of arsDA had no noticeable effect on resistance to arsenite or arsenate in E. coli. ORFs 7 and 8 had clear sequence similarity to an NADH oxidase and a CBS-domain-containing protein, respectively, but their deletion did not affect resistance to arsenite or arsenate in E. coli. TnAtcArs was actively transposed in E. coli, but no increase in transposition frequency in the presence of arsenic was detected. Northern hybridization and reporter gene studies indicated that although ArsR regulated the 10 kb operon containing the arsenic-resistance genes in response to arsenic, ArsR had no effect on the regulation of genes associated with transposition activity.

DNA-binding specificity of rice mariner-like transposases and interactions with Stowaway MITEs

Mariner-like elements (MLEs) are DNA transposons found throughout the plant and animal kingdoms. A previous computational survey of the rice (Oryza sativa) genome sequence revealed 34 full length MLEs (Osmars) belonging to 25 distinct families. This survey, which also identified sequence similarities between the Osmar elements and the Stowaway superfamily of MITEs, led to the formulation of a hypothesis whereby Stowaways are mobilized by OSMAR transposases. Here we investigate the DNA-binding activities and specificities of two OSMAR transposases, OSMAR5 and OSMAR10. Like other mariner-like transposases, the OSMARs bind specifically to the terminal inverted repeat (TIR) sequences of their encoding transposons. OSMAR5 binds DNA through a bipartite N-terminal domain containing two functionally separable helix-turn-helix motifs, resembling the paired domain of Tc1-like transposases and PAX transcription factors in metazoans. Furthermore, binding of the OSMARs is not limited to their own TIRs; OSMAR5 transposase can also interact in vitro with TIRs from closely related Osmar elements and with consensus TIRs of several Stowaway families mined from the rice genome sequence. These results provide the first biochemical evidence for a functional relationship between Osmar elements and Stowaway MITEs and lead us to suggest that there is extensive cross-talk among related but distinct transposon families co-existing in a single eukaryote genome.

DTL, the Drosophila Homolog of PIMT/Tgs1 Nuclear Receptor Coactivator-interacting Protein/RNA Methyltransferase, Has an Essential Role in Development

We describe a novel Drosophila gene, dtl (Drosophila Tat-like), which encodes a 60-kDa protein with RNA binding activity and a methyltransferase (MTase) domain. Dtl has an essential role in Drosophila development. The homologs of DTL recently described include PIMT (peroxisome proliferator-activated receptor-interacting protein with a methyltransferase domain), an RNA-binding protein that interacts with and enhances the nuclear receptor coactivator function, and TGS1, the methyltransferase involved in the formation of the 2,2,7-trimethylguanosine (m3G) cap of non-coding small RNAs. DTL is expressed throughout all of the developmental stages of Drosophila. The dtl mRNA has two ORFs (uORF and dORF). The product of dORF is the 60-kDa PIMT/TGS1 homolog protein that is translated from an internal AUG located 538 bp downstream from the 5' end of the message. This product of dtl is responsible for the formation of the m3G cap of small RNAs of Drosophila. Trimethylguanosine synthase activity is essential in Drosophila. The deletion in the dORF or point mutation in the putative MTase active site results in a reduced pool of m3G cap-containing RNAs and lethality in the early pupa stage. The 5' region of the dtl message also has the coding capacity (uORF) for a 178 amino acid protein. For complete rescue of the lethal phenotype of dtl mutants, the presence of the entire dtl transcription unit is required. Transgenes that carry mutations within the uORF restore the MTase activity but result in only partial rescue of the lethal phenotype. Interestingly, two transgenes bearing a mutation in uORF or dORF in trans can result in complete rescue.

The Caenorhabditis briggsae genome contains active CbmaT1 and Tcb1 transposons

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. We present evidence, based on searches of publicly available databases, that the nematode Caenorhabditis briggsae has several maT-like transposons, which we have designated as CbmaT elements, dispersed throughout its genome. We also describe two additional transposon sequences that probably share their evolutionary history with the CbmaT transposons. One resembles a fold back variant of a CbmaT element, with long (380-bp) inverted terminal repeats (ITRs) that show a high degree (71%) of identity to CbmaT1. The other, which shares only the 26-bp ITR sequences with one of the CbmaT variants, is present in eight nearly identical copies, but does not have a transposase gene and may therefore be cross mobilised by a CbmaT transposase. Using PCR-based mobility assays, we show that CbmaT1 transposons are capable of excising from the C. briggsae genome. CbmaT1 excised approximately 500 times less frequently than Tcb1 in the reference strain AF16, but both CbmaT1 and Tcb1 excised at extremely high frequencies in the HK105 strain. The HK105 strain also exhibited a high frequency of spontaneous induction of unc-22 mutants, suggesting that it may be a mutator strain of C. briggsae.

Characterization of a carbapenemase-producing clinical isolate of Bacteroides fragilis in Scandinavia: Genetic analysis of a unique insertion sequence

In 2003 a Bacteroides fragilis blood culture isolate (K2-28) was recovered from a 61-y-old male with severe general atherosclerosis during treatment with meropenem. K2-28 was shown to possess a functional metallo-beta-lactamase with a reduction in imipenem MIC from 256 to 3 mg/l in the presence of EDTA using the MBL E-test strip. PCR results were for positive for the cfiA gene. Analysis of the cfiA from K2-28 revealed it was 100% identical to previously described cfiA-1 genes. Analysis of the upstream region of cfiA revealed a novel insertion sequence (IS) element, being most similar (94% identity) to IS612 recently described from Japan designating the element within the IS4 family. The element possessed a perfect terminal inverted repeat sequence at the distal ends of the IS element and provided a putative promoter for transcription of the cfiA gene. The distance between the hybrid promoter and the cfiA start codon was 158 base pairs and inserted into a different DNA sequence upstream of cfiA to that previously reported. The -10 promoter region was most similar to that of IS613 (100%) and the -35 promoter region to IS612 (100%), demonstrating the plasticity of these genetic regions.

Inverted terminal repeat sequences are important for intermolecular recombination and circularization of adeno-associated virus genomes.

The relatively small package capacity (less than 5 kb) of adeno-associated virus (AAV) vectors has been effectively doubled with the development of dual-vector heterodimerization approaches. However, the efficiency of such dual-vector systems is limited not only by the extent to which intermolecular recombination occurs between two independent vector genomes, but also by the directional bias required for successful transgene reconstitution following concatemerization. In the present study, we sought to evaluate the mechanisms by which inverted terminal repeat (ITR) sequences mediate intermolecular recombination of AAV genomes, with the goal of engineering more efficient vectors for dual-vector trans-splicing approaches. To this end, we generated a novel AAV hybrid-ITR vector characterized by an AAV-2 and an AAV-5 ITR at opposite ends of the viral genome. This hybrid genome was efficiently packaged into either AAV-2 or AAV-5 capsids to generate infectious virions. Hybrid AV2:5 ITR viruses had a significantly lower capacity to form circular intermediates in infected cells than homologous AV2:2 and AV5:5 ITR vectors despite their similar capacity to express an encoded enhanced green fluorescent protein (EGFP) transgene. To examine whether the divergent ITR sequences contained within hybrid AV2:5 ITR vectors could direct intermolecular recombination in a tail-to-head fashion, we generated two hybrid ITR trans-splicing vectors (AV5:2LacZdonor and AV2:5LacZacceptor). Each delivered one exon of a beta-galactosidase minigene flanked by donor or acceptor splice sequences. These hybrid trans-splicing vectors were compared to homologous AV5:5 and AV2:2 trans-splicing vector sets for their ability to reconstitute beta-galactosidase gene expression. Results from this comparison demonstrated that hybrid ITR dual-vector sets had a significantly enhanced trans-splicing efficiency (6- to 10-fold, depending on the capsid serotype) compared to homologous ITR vectors. Molecular studies of viral genome structures suggest that hybrid ITR vectors provide more efficient directional recombination due to an increased abundance of linear-form genomes. These studies provide direct evidence for the importance of ITR sequences in directing intermolecular and intramolecular homologous recombination of AAV genomes. The use of hybrid ITR AAV vector genomes provides new strategies to manipulate viral genome conversion products and to direct intermolecular recombination events required for efficient dual-AAV vector reconstitution of the transgene.

Promoter activity of left inverted terminal repeat and downstream sequences of porcine adenovirus type 3

Early region 1 (E1) of porcine adenovirus type 3 (PAdV-3) consists of E1A and E1B transcription units. The authentic promoter region of E1A contains a TATA box at nucleotide position (nt) 449 and a bifunctional regulatory element between nt 374 and 431, which enhances the transcription of E1A, but represses that of E1B. Here, we investigated the role of the left inverted terminal repeat (ITR) and its downstream sequences (between nt 151 and 312) in the transcription of early viral genes, and viral replication. Mutant PAdV-3s without the authentic E1A promoter region could be rescued by transfection of mutant genomic DNA into fetal porcine retina cells. Moreover, the mutant PAdV-3s produced E1A-specific mRNA and remained viable in swine testis (ST) cells suggesting that the left-terminal 151 bp including the ITR, can serve as a promoter for E1A expression. However, mutant PAdV-3s containing deletion including authentic E1A promoter region, displayed both reduced steady-state levels of early gene mRNAs (E1A, E1B, E2A, E3, and E4) and decreased rate of viral replication in ST cells. Interestingly, mutant PAdV-3s containing the left-terminal 312 bp displayed increased transcription of early genes including E1A. Our results suggest that the left ITR of PAdV-3 contain the promoter like elements and the sequences (between nt 151 and 312) downstream of left ITR can enhance its promoter activity.

Tn XO1, a germination-associated class II transposon from Bacillus anthracis

Bacillus anthracis harbours two virulence plasmids, pXO1 (182 kb) and pXO2 (95 kb). Whereas pXO2 harbours the cap operon coding for the capsule, pXO1 contains the pag, lef, and cya genes coding for protective antigen, lethal, and oedema factors, respectively, as well as the atxA regulatory gene. These genes are located within a 44.8 kb long pathogenicity island flanked by insertion sequences. Here, we describe the presence in the same plasmid region of an 8679 bp genetic element displaying the structural features of a class II cointegrative transposon. This element, named Tn XO1, bears a transposase and a site-specific recombinase and is delineated by 38 bp terminal inverted repeats sequences similar to those of other members of this group of transposons. A putative res site has been identified in the 200 bp region between these genes. Interestingly, Tn XO1 also contains the gerX operon involved in the germination of B. anthracis spores within phagocytic cells. Such close association of a mobile DNA structure with known virulence determinants in a pathogen further prompted us to look for the presence of this transposable element in other members of the Bacillus cereus sensu lato group. No instance of Tn XO1 was detected outside of B. anthracis in PCR experiments, although it was found to be present in the genome sequence draft of one strain of B. cereus which has recently been shown to harbour a plasmid almost identical to pXO1.

Common structure of rare replication-deficient E1-positive particles in adenoviral vector batches.

The use of the PER.C6 adenovirus packaging cell line in combination with a designated vector plasmid system, whereby the cell line and vector with E1 deleted have no sequence overlap, eliminates the generation of replication-competent adenovirus during vector production. However, we have found cytopathic effect (CPE)-inducing particles in 2 out of more than 40 large-scale manufacturing lots produced in PER.C6 cells. The CPE inducer was detected at a frequency of 1 event in 7.5 x 10(12) vector particles. Despite amplification, it was not readily purified, indicating that the agent itself is replication deficient and requires the parental recombinant adenovirus serotype 5 (rAd5) vector for replication and packaging. Therefore, we designated the agent as a helper-dependent E1-positive region containing viral particle (HDEP). Here, we report the molecular structure of the HDEP genome, revealing an Ad comprised of E1 sequences derived from PER.C6 cells flanked by inverted terminal repeat, packaging signal, and transgene sequences. These sequences form a palindromic structure devoid of E2, E3, E4, and late genes. Since only 5 bp were shared between E1 sequences in the PER.C6 genome and viral vector sequences, the data strongly suggested that insertion of genomic DNA into an adenoviral genome had occurred essentially via nonhomologous recombination. HDEPs have been found in unrelated virus batches and appear to share a common structure that may explain their mechanism of generation. This finding allowed development of an HDEP assay to screen batches of rAd5 produced on the PER.C6 cell line and resulted in detection of seven HDEP agents from four different transgene-virus vector constructs in separate batches of Ad.

Inverted terminal repeat sequences of adeno-associated virus enhance the antibody and CD8 + responses to a HIV-1 p55Gag/LAMP DNA vaccine chimera

The immune responses to an HIV-1 p55Gag vaccine encoded as a DNA chimera with the lysosomal associated membrane protein-1 (LAMP) have been examined for the effect of the addition of the inverted terminal repeat (ITR) sequences of the adeno-associated virus (AAV) to the DNA plasmid construct, and of packaging the LAMP/ gag gene as a recombinant AAV vector (rAAV). DNA plasmids encoding Gag and the LAMP/Gag protein chimera were constructed in two vectors, the pcDNA3.1 and a corresponding plasmid containing the ITR sequences (pITR) flanking the expression elements of the plasmid, and the pITR LAMP/ gag DNA plasmid was encapsidated in the rAAV vector. Human 293 cells transfected in vitro with LAMP/ gag plasmids either in pcDNA3.1 or pITR produced much Gag protein in cell extracts (1.6 and 2.2 ng of Gag/mg of protein, respectively). The immune responses of mice to immunization with these constructs were examined under three protocols: DNA prime/DNA boost, DNA prime/rAAV boost, and a single rAAV immunization. The results demonstrated that under DNA prime/DNA boost protocol, the “naked” DNA vaccines encoding the LAMP/ gag chimera, either as pcDNA3.1 or pITR DNA plasmid constructs, elicited strong CD4 + T cell responses. In contrast, significantly higher levels of CD8 + and antibody responses were observed with the pITR-DNA constructs. Immunization with the rAAV vector under the DNA prime/rAAV boost protocol resulted in sustained T cell responses and a markedly increased antibody response, predominantly of the IgG 1 isotype resulting from the activation of the Th2 subset of CD4+ T cells, that was sustained for at least 5 months after immunization.

Stable transduction of large DNA by high-capacity adeno-associated virus/adenovirus hybrid vectors

Viral vectors with high cloning capacity and host chromosomal integration ability are in demand for the efficient and permanent genetic modification of target cells with large DNA molecules. We have generated a hybrid gene transfer vehicle consisting of recombinant adeno-associated virus (AAV) replicative intermediates packaged in adenovirus (Ad) capsids. This arrangement allows cell cycle-independent nuclear delivery of recombinant AAV genomes with lengths considerably above the maximum size (i.e., 4.7 kb) that can be accommodated within AAV capsids. Here we show that high-capacity AAV/Ad hybrid vector gene transfer mediates cellular genomic integration of large fragments of foreign DNA and accomplishes stable long-term transgene expression in rapidly proliferating cells. Southern blot and polymerase chain reaction analyses of chromosomal DNA extracted from clones of stably transduced cells revealed that most of them contained a single copy of the full-length hybrid vector genome with AAV inverted terminal repeat (ITR) sequences at both ends. The high-capacity AAV/Ad hybrid vector system can thus be used for the transfer and expression of transgenes that cannot be delivered by conventional integrating viral vectors.

Construction and sequencing of an infectious clone of the human parvovirus B19

Human parvovirus B19 has a nonenveloped, icosahedral capsid packaging a linear single-stranded DNA genome of 5.6 kb with long inverted terminal repeats (ITR) at both the 5′ and 3′ end. Previous attempts to construct a full-length B19 clone were unsuccessful due to deletions in the ITR sequences. We cloned the complete parvovirus B19 genome with intact ITRs from an aplastic crisis patient. Sequence analysis of the complete viral genome indicated that both 5′ and 3′ ITRs have two sequence configurations and several base changes within the ITRs compared to previous published sequences. After transfection of the plasmid into permissive cells, spliced and non-spliced viral transcripts and viral capsid proteins could be detected. Southern blot analysis of the DNA purified from the plasmid-transfected cells confirmed parvovirus B19 DNA replication. Production of infectious virus by the B19 plasmid was shown by inoculation of cell lysate derived from transfected cells into fresh cells. Together, these results indicate the first successful production of an infectious clone for parvovirus B19 virus.