Terminal Groups Research Articles

Biomimetic design of polyisoprene rubber with terminal synergistic effects leading to mechanical properties and creep resistance boost

The enhancement of polyisoprene rubber performance through biomimetic simulation of the terminal effect of natural rubber has been explored. So far, the presence of synergistic effects between different terminal groups and the challenge of controlling the relaxation behavior of non-covalent bonds while preserving their advantages remain open questions. In this study, we successfully prepared natural rubber biomimetic polymers with different functionalized terminals. Specifically, we constructed terminal-olefin cross-linking points at one end of the polymer chains, while dissociable oligopeptide assemblies were formed at the other end. Investigation of the viscoelastic behavior of the polymers and the structure of the rubber network confirmed the existence of synergistic effects between different terminal groups. The terminal-olefin cross-linking points effectively anchored the rubber network and stabilized the non-covalent bonds. Simultaneously, the non-covalent bonds formed by the oligopeptides acted as weak bonds, dissipating energy and improving the dimensional stability and mechanical properties of the vulcanized rubber.

On the Radiation Resistance of Tetrafluoroethylene Telomers with Terminal Hydroxyl Groups

On the Radiation Resistance of Tetrafluoroethylene Telomers with Terminal Hydroxyl Groups

Terminal {Ni(II)-SH} complex promoted anaerobic catalytic sulfur atom transfer reaction: implication to the sulfide oxidase function of Cu/Zn-superoxide dismutase.

In mitochondria, the detoxification of molar excess H2S as polysulfide proceeded via an oxidation process promoted by Cu/Zn containing superoxide dismutase (SOD1) enzyme, which has been very recently reported as the alternative enzyme for cytosolic H2S oxidation. Herein, we present Ni(II) complexes bearing the terminal SH group as a synthetic functional analogue for the sulfide oxidase function of SOD1. Synthesis, crystal structure and complete spectroscopic characterization of two sets of complexes, [NiLOMe/tBu(PPh3)] (2OMe/tBu) and tetraethyl salt of [NiLOMe/tBu(SH)]-1 (3OMe/tBu), were described (LOMe = (E)-2-methoxy-6-(((2-sulfidophenyl)imino)methyl)phenolate and LtBu = (E)-2,4-di-tert-butyl-6-(((2-sulfidophenyl)imino)methyl)phenolate). Under anaerobic conditions, 3OMe/tBu responded to a catalytic sulfur atom transfer (SAT) reaction with PPh3 to produce SPPh3. The SAT reaction was analyzed using detailed studies of 1H and 31P NMR spectra. Finally, the SAT reactivity pattern was compared with the same in the native enzyme of SOD1.

Interface strengthening for carbon fiber‐reinforced poly(ether‐ether‐ketone) laminated composites by introducing fluorene‐containing branched poly(aryl‐ether‐ketone)

AbstractFluorene‐containing branched poly(aryl‐ether‐ketone) (BFPAEK) with terminal hydroxyl groups is synthesized by random copolycondensation reaction; then, the CF@BFPAEK/PEEK laminated composite is prepared by the “powder impregnation‐high temperature compression molding” method with poly(ether‐ether‐ketone) (PEEK) as the matrix and BFPAEK‐modified carbon fiber (CF@BFPAEK) as the reinforcement. When the content of branched units in BFPAEK is 10% and the coating amount of BFPAEK on the carbon fiber (CF) surface is 3 wt%, the CF@BFPAEK/PEEK laminated composite has outstanding mechanical properties, with an interlaminar shear strength (ILSS) of 57.3 MPa and flexural strength of 589.4 MPa, which are 80.2% and 44.3% higher than those of the pure CF/PEEK laminated composite (31.8 and 408.4 MPa), respectively. After 288 h of hydrothermal aging and high/low‐temperature alternating aging, the corresponding retention rate of ILSS and flexural strength are respectively 87.9% and 84.7%, higher than those of pure CF/PEEK laminated composites (74.5% and 70.4%). The thermal conductivity coefficient and temperature for 5% weight loss of CF@BFPAEK/PEEK laminated composite are 1.85 W m−1 K−1 and 538.0°C, respectively.

Molten Salt Derived MXenes: Synthesis and Applications.

About one decade after the first report on MXenes, these 2D early transition metal carbides or nitrides have become among the best-performing materials in electrode applications related to electrical energy storage devices and power-to-fuels conversion. MXenes are obtained by a top-down approach starting from the appropriate 3D MAX phase that undergoes etching of the A-site metal. Initial etching procedures are based on the use of concentrated HF or the in situ generation of this highly corrosive and poisonous reagent. Etching of the MAX phase is one of the major hurdles limiting the progress of the field. The present review summarizes an alternative, universal, and easily scalable etching procedure based on treating the MAX precursor with a Lewis acid molten salt. The review starts with presenting the current state of the art of the molten salt etching procedure to obtain or modify MXene, followed by a summary of the applications of these MXene samples. The aim of the review is to show the versatility and advantages of molten salt etching in terms of general applicability, control of the surface terminal groups, and uniform deposition of metal nanoparticles, among other features of the procedure.

Tailoring Highly Branched Poly(β-amino ester)s for Efficient and Organ-Selective mRNA Delivery.

Development of mRNA therapeutics necessitates targeted delivery technology, while the clinically advanced lipid nanoparticles face difficulty for extrahepatic delivery. Herein, we design highly branched poly(β-amino ester)s (HPAEs) for efficacious organ-selective mRNA delivery through tailoring their chemical compositions and topological structures. Using an "A2+B3+C2" Michael addition platform, a combinatorial library of 219 HPAEs with varied backbone structures, terminal groups, and branching degrees are synthesized. The branched topological structures of HPAEs provide enhanced serum resistance and significantly higher mRNA expression in vivo. The terminal amine structures of HPAEs determine the organ-selectivity of mRNA delivery following systemic administration: morpholine facilitates liver targeting, ethylenediamine favors spleen delivery, while methylpentane enables mRNA delivery to the liver, spleen, and lungs simultaneously. This study represents a comprehensive exploration of the structure-activity relationship governing both the efficiency and organ-selectivity of mRNA delivery by HPAEs, suggesting promising candidates for treating various organ-related diseases.

Epoxidized Soybean Oil Toughened Poly(lactic acid)/Lignin-g-Poly(lauryl methacrylate) Bio-Composite Films with Potential Food Packaging Application

The application of lignin as a filler for poly (lactic acid) (PLA) is limited by their poor interfacial adhesion. To address this challenge, lignin-graft-poly(lauryl methacrylate) (LG-g-PLMA) was first blended with poly (lactic acid), and then epoxidized soybean oil (ESO) was also added to prepare PLA/LG-g-PLMA/ESO composite, which was subsequently hot pressed to prepare the composite films. The effect of ESO as a plasticizer on the thermal, mechanical, and rheological properties, as well as the fracture surface morphology of the PLA/LG-g-PLMA composite films, were investigated. It was found that the compatibility and toughness of the composites were improved by the addition of ESO. The elongation at break of the composites with an ESO content of 5 phr was increased from 5.6% to 104.6%, and the tensile toughness was increased from 4.1 MJ/m3 to 44.7 MJ/m3, as compared with the PLA/LG-g-PLMA composite without ESO addition. The toughening effect of ESO on composites is generally attributed to the plasticization effect of ESO, and the interaction between the epoxy groups of ESO and the terminal carboxyl groups of PLA. Furthermore, PLA/LG-g-PLMA/ESO composite films exhibited excellent UV barrier properties and an overall migration value below the permitted limit (10 mg/dm2), indicating that the thus-prepared biocomposite films might potentially be applied to environmentally friendly food packaging.

Effect of the Chemical Nature of MQ Copolymers on the Rheological Properties of Compositions on Their Basis

The rheological and rheokinetic properties of the compositions based on low-molecular rubber polyisoprene and MQ copolymer particles with decyl terminal groups were studied. The effect of the ratio of M and Q units in the copolymer on the rheological and mechanical properties of the compositions was analyzed. An increase in the length of a hydrocarbon substituent in M units was shown to lead to an increase in the affinity of the copolymer to the carbon-chain polymer matrix. An increase in the content of Q units facilitates the growth of the elastic modulus of the cured composites.

Hierarchical Self-Assembly and Aggregation-Induced EmissionEnhancement in Tetrabenzofluorene-based Red Emitting Molecules.

The newly synthesized chiral active [5]helicene-like tetrabenzofluorene (TBF) based highly red-emitting molecules exhibit flower-like self-assembly. These molecules display photophysical and structural properties such as intramolecular charge transfer, dual state emission, large fluorescence quantum yield, and solvatochromism. In TBFID, the indandione functional group attached on both sides as the terminal group offers an A-D-A push-pull effect and acts as a strong acceptor to cause more redshift in solution as well as in solid state as compared to TBFPA (TBF with benzaldehyde functional group in terminal position). The self-assembly studies of TBFID demonstrate the aggregation-induced emission enhancement (AIEE) attributed to the restriction of intramolecular rotation at the aggregated state. Furthermore, TBFID shows high quantum yield and intense red emission, making the molecule fit for organic light-emitting diodes (OLED) and bioimaging applications.

Leveraging High-Resolution Ion Mobility-Mass Spectrometry for Cyclic Peptide Soft Spot Identification.

Cyclic peptides are an important class of molecules that gained significant attention in the field of drug discovery due to their unique pharmacological characteristics and enhanced proteolytic stability. Yet, gastrointestinal degradation remains a major hurdle in the discovery of orally bioavailable cyclic peptides. Soft spot identification (SSID) of the regions in the cyclic peptide sequence susceptible to amide hydrolysis by proteases is used in the discovery stage to guide medicinal chemistry design. SSID can be an arduous task, traditionally performed using liquid chromatography-tandem mass spectrometry (LC-MS/MS), often resulting in complex and time-consuming manual analysis, particularly when isomeric linear peptide metabolites chromatographically coelute. Here, we present an alternative orthogonal approach that entails a high-resolution ion mobility (HRIM) system based on Structures for Lossless Ion Manipulation (SLIM) technology interfaced with quadrupole time-of-flight (QTOF) mass spectrometry to address some of the challenges associated with SSID. Two strategies were used to resolve linear isomeric peptide metabolites: labeled and label-free, both utilizing the HRIM platform. The label-free strategy leverages negative polarity to ionize the isomers which achieves better separation of the gas phase ions in the ion mobility (IM) dimension as compared to positive polarity, which is a more conventional approach when studying proteins and peptides. The second approach uses an isotope-labeled dimethyl tag on the terminal amine group, acting as a "shift reagent" to influence the mobility of isomers in the positive mode. This method resulted in baseline separation for the isomers of interest and produced unique product ions in the fragmentation spectra for unambiguous soft spot identification. Both label-free and labeled strategies demonstrated the ability to solve the challenges associated with SSID for cyclic peptides.

Mechanism and kinetics of polycarbonate synthesized from isosorbide: Identification on the reactivity of terminal groups

AbstractChallenges in the mechanistic and kinetic study on the polymerization with multiple functional monomers hinder the scale‐up for the controllable reaction process. Herein, poly (isosorbide carbonate) synthesized from isosorbide (ISB) was employed to investigate the reaction behavior of functional monomers during polymerization. DFT calculations not only determined the energetically preferable pathways but also provided explanations for the significant differences between terminal groups at the molecular level. Subsequently, the characteristic absorption bands were detected from 1000 to 1100 cm−1 for hydroxyls on ISB, providing a quantitative measure for asymmetric hydroxyls. The reaction network indicated that the reactivity was dominated by the types of terminal groups instead of the chain length. Thereafter, a functional group model with six kinetic parameters was built, acting a crucial role in reaction control and reactor design. This method can be promoted to other functional monomers, conducing to the industrialization of high‐performance polymers.

Biophysical and structural analyses of the interaction between the SHANK1 PDZ domain and an internal SLiM.

The PDZ (Postsynaptic density protein-95[PSD-95]/Discs-large) domain, prevalent as a recognition module, has attracted significant attention given its ability to specifically recognize ligands with consensus motifs (also termed PDZ binding motifs [PBMs]). PBMs typically bear a C-terminal carboxylate as a recognition handle and have been extensively characterized, whilst internal ligands are less well known. Here we characterize a short linear motif (SLiM) - EESTSFQGP - as an internal PBM based on its strong binding affinity towards the SHANK1 PDZ domain (SHANK1656-762 hereafter referred to as SHANK1). Using the acetylated analogue Ac-EESTSFQGP-CONH2 as a competitor for the interaction of SHANK1 with FAM-Ahx-EESTSFQGP-CONH2 or a typical fluorophore-labelled C-terminal PBM - GKAP - FITC-Ahx-EAQTRL-COOH - the internal SLiM was demonstrated to show comparable low-micromolar IC50 by competition fluorescent anisotropy. To gain further insight into the internal ligand interaction at the molecular level, we obtained the X-ray co-crystal structure of the Ac-EESTSFQGP-CONH2/SHANK1 complex and compared this to the Ac-EAQTRL-COOH/SHANK1 complex. The crystallographic studies reveal that the SHANK1 backbones for the two interactions overlap significantly. The main structural differences were shown to result from the flexible loops which reorganize to accommodate the two PBMs with distinct lengths and terminal groups. In addition, the two C-terminal residues Gly and Pro in Ac-EESTSFQGP-CONH2 were shown not to participate in interaction with the target protein, implying further truncation and structural modification using peptidomimetic approaches on this sequence may be feasible. Taken together, the SLiM Ac-EESTSFQGP-CONH2 holds potential as an internal ligand for targeting SHANK1.

Mechanism and kinetics of polycarbonate synthesized from isosorbide: Identification on the reactivity of terminal groups

Mechanism and kinetics of polycarbonate synthesized from isosorbide: Identification on the reactivity of terminal groups

A Tale of Two Tails: Rotational Spectroscopy of N-Ethyl Maleimide and N-Ethyl Succinimide.

Broadband microwave spectra of N-ethyl maleimide (NEM) and N-ethyl succinimide (NES) have been recorded using chirped pulse Fourier transform microwave spectroscopy in the Ka-band (26.5-40 GHz). The spectra for both molecules were fit to a Watson A-reduced Hamiltonian in the Ir representation to obtain best fit experimental rotational constants (NEM: A0 = 2143.1988(29), B0 = 1868.7333(22), C0 = 1082.98458(36); NES: A0 = 2061.47756(14), B0 = 1791.73517(12), C0 = 1050.31263(11)), centrifugal distortion constants, and nuclear quadrupole coupling constants. While the heavy atoms of the five-membered ring of both molecules are planar, the ethyl chain has its terminal methyl group perpendicular to the ring. Along the relaxed potential energy curve for the ethyl dihedral angle (θ1 = C(6)-C(5)-N-C(4)), the ethyl group experiences significant steric strain when it is in the plane of the ring, associated with the interaction of the ethyl group with the two carbonyl oxygens. This leads to calculated barriers of θ1 = 1469 cm-1 and θ1 = 1680 cm-1 in N-ethyl maleimide and N-ethyl succinimide, respectively.

Biomimetic Charge‐Neutral Anion Receptors for Reversible Binding and Release of Highly Hydrated Phosphate in Water

AbstractControl of phosphate capture and release is vital in environmental, biological, and pharmaceutical contexts. However, the binding of trivalent phosphate (PO43−) in water is exceptionally difficult due to its high hydration energy. Based on the anion coordination chemistry of phosphate, in this study, four charge‐neutral tripodal hexaurea receptors (L1–L4), which were equipped with morpholine and polyethylene glycol terminal groups to enhance their solubility in water, were synthesized to enable the pH‐triggered phosphate binding and release in aqueous solutions. Encouragingly, the receptors were found to bind PO43− anion in a 1 : 1 ratio via hydrogen bonds in 100 % water solutions, with L1 exhibiting the highest binding constant (1.2×103 M−1). These represent the first neutral anion ligands to bind phosphate in 100 % water and demonstrate the potential for phosphate capture and release in water through pH‐triggered mechanisms, mimicking native phosphate binding proteins. Furthermore, L1 can also bind multiple bioavailable phosphate species, which may serve as model systems for probing and modulating phosphate homeostasis in biological and biomedical researches.

Interfacial Crosslinking for Efficient and Stable Planar TiO2 Perovskite Solar Cells.

The buried interface between the electron transport layer (ETL) and the perovskite layer plays a crucial role in enhancing the power conversion efficiency (PCE) and stability of n-i-p type perovskite solar cells (PSCs). In this study, the interface between the chemical bath deposited (CBD) titanium oxide (TiO2) ETL and the perovskite layer using multi-functional potassium trifluoromethyl sulfonate (SK) is modified. Structural and elemental analyses reveal that the trifluoromethyl sulfonate serves as a crosslinker between the TiO2 and the perovskite layer, thus improving the adhesion of the perovskite to the TiO2 ETL through strong bonding of the ─CF3 and ─SO3 - terminal groups. Furthermore, the multi-functional modifiers reduced interface defects and suppressed carrier recombination in the PSCs. Consequently, devices with a champion PCE of 25.22% and a fill factor (FF) close to 85% is achieved, marking the highest PCE and FF observed for PSCs based on CBD TiO2. The unencapsulated device maintained 81.3% of its initial PCE after operating for 1000 h.

Enhancing bacterial control and daylight-driven water remediation with chitosan-impregnated MoC nanosheets.

The functionalization of nanoparticles with 2D nanosheets is an effective approach to enhance their functional properties for pollutant removal. This research outlines the synthesis of a 2D-delaminated molybdenum carbide (MXene) chitosan nanocomposite (2D-d-Mo2CTx-Cs NC) with bacterial control and photocatalytic properties for dye adsorption. The nanocomposite includes Tx-surface terminating groups O, OH, and F. In this investigation, the composite was synthesized using the etching method and its formation was confirmed through UV spectra at 288nm. It was characterized through FTIR, XRD, Particle size, Zetapotential, FESEM, HRTEM, EDAX, and XPS analyses. FTIR spectral analysis of NC suggests that amines are formed through a Schiff base reaction between glutaraldehyde and Cs, or through the interaction of terminal aldehydes and carbonyl groups. The XRD analysis confirmed the crystalline structure of the composite. FESEM images revealed irregularly structured nanosheets (NSs) material in the prepared 2D-d-Mo2CTx-Cs NC samples. HRTEM images revealed 2D-d-Mo2CTx NSs impregnated onto Cs with an average size of 50nm, as confirmed by a particle size analyzer, with a zeta potential value of -15mV. Additionally, Mo, C, N, and O are the most significant elements present in the NC, as confirmed by EDAX and XPS analyses. Further, biocompatibility testing of 2D-d-Mo2CTx-Cs NC yielded positive results. Moreover, under sunlight, the composites effectively adsorbed methylene blue with a 90% adsorption capacity, as confirmed by kinetic studies. Furthermore, the synergistic effect of Cs and d-Mo2CTx NSs resulted in significant antibacterial (50-200µl of 1mg/ml) and antibiofilm activity (100µl of 1mg/ml) against pathogenic bacteria. Furthermore, this study represents the first report on the use of 2D-d-Mo2CTx-Cs NC for daylight-influenced photocatalytic applications with a bacteria-controlling effect.

Double-bridged N–B←N bipyridyl-based airfoil-shaped small molecule dyes: π-bridge regulation on photovoltaic performance

The double-bridged N–B←N bipyridine unit (BNBP) with boron-nitrogen covalent bond and coordination bond can reduce the electronic energy level of the π-conjugated system, resulting in a reduction of band gap and a red shift in the absorption spectrum. Embedding the BNBP building block into organic optoelectronic materials provides a novel possibility in molecule design. In this paper, under the guidance of density functional theory (DFT) calculations, a series of 3D “airfoil-shaped” small molecule donors (SMDs) have been designed and successfully synthesized through Sonogashira, Suzuki and Stille coupling reactions. BNBP is adopted as the central electron-withdrawing unit and strong electron-rich triphenylamine (TPA) as the terminal group. The novel “airfoil-shaped” structure plays a supporting role in reducing the carrier recombination in the active layer. It reveals that molecular design engineering can achieve the expected results by the following steps: Firstly, the introduction of electron-rich alkoxy groups into the end of TPA through side chain engineering helps to improve the solubility and film-forming properties of the materials. Then, the π-bridge regulation not only extends the conjugate structure, but also plays a crucial role in the regulation of photovoltaic properties. It is worth noting that the compound BNBP(3TTPA)2 was synthesized by introducing thiophene oligomer into BNBP-based SMDs for the first time. Finally, the compound BNBP(EDPPTPA)2 was constructed by combining BNBP with DPP dye unit. Its narrow band gap is only 1.36 eV, which is one of the narrowest band gaps in small molecular organic-boron materials. In particular, compared with the starting compound BNBP(ETPA)2, the synergistic effects of DPP and BNBP broaden the edge absorption wavelength to 814 nm, resulting in a red shift of 170 nm. The power conversion efficiency (PCE) of 4.48 % is obtained in BNBP(EDPPTPA)2-based bulk heterojunction (BHJ) organic solar cells (OSCs), which is more than twice that of reference compound BNBP(ETPA)2. This work provides important references for the future development of 3D BNBP-based organic-boron SMDs and the structural regulation of materials through molecular engineering.

Observation of band gap enhancement and green-yellow emission of thermally stable MXene nanosheets

The known two-dimensional material MXene comprises carbide, carbonitride, and nitride. MXene processes are hydrophilic in addition to high electrical conductivity, thermal conductivity, flexibility, Young’s modulus, fracture toughness, etc. The present work synthesizes a thermodynamically stable titanium-based MXene using HF etchant at low temperatures. Also, the paper manifests how the functional group affects the conducting nature of MXene. The structural properties of synthesized MXene are examined using XRD patterns, where the shift in the (002) arises. This indicates the successful formation of MXene. The electron microscopy of MXene is done using FESEM and HRTEM, which shows the layered structure of MXene thickness ranging from 5nm to 8nm along with EDX spectra showing the pure form of MXene with -F, -O and -OH as the termination groups which is further confirmed by Raman spectroscopy and FTIR spectroscopy. The optical behavior is then examined using UV–Vis spectroscopy, and a large bandgap of symmetric MXene is observed, i.e., 1.1eV, due to the addition of a functional group at the surface of the MXene nanosheet. This demonstrates the semiconducting nature of MXene and the small particle size. Photoluminescence (PL) and Zeta-potential were also used to analyze the excellent stability of MXene after the material was confirmed, and the results indicate the green-yellow emission of the material. This prudent the thermally-stable MXene over the period both before and after 20 days. The electrical properties were then examined through current–voltage measurement, which predict the semiconducting nature of MXene.Consequently, the material can be used in numerous energy and optoelectronic applications.

Preparation of hyperbranched polysiloxane containing terminal amino group and research on their luminescence properties

Preparation of hyperbranched polysiloxane containing terminal amino group and research on their luminescence properties