Tension Band Plate Research Articles

Tension band plating of an anterior tibial stress fracture nonunion in an elite athlete, initially treated with intramedullary nailing: a case report

BackgroundLeg pain in athletes is a common condition and is often related to tibial stress fracture. When non-operative treatment fails, the optimal surgical treatment is controversial. The aim of this study was to report a case of tension band plating of an anterior tibial stress fracture nonunion, treated previously with intramedullary nailing. To the best of our knowledge, this is the first reported case in which tension band plating was placed without removing the preexisting intramedullary nail.Case presentationThe tibial shaft is a common location of stress fracture in athletes. Anterior tibial stress fractures are difficult to manage. When conservative treatment fails, intramedullary nailing is the mainstay of treatment. However, nonunion is a serious complication. In our case, a non-united anterior tibial stress fracture, treated with intramedullary nailing, was addressed with the application of a compression prebended plate over the nail in a 23-year-old French man of African origin who is an elite football player. At 3-months postoperatively he was pain free and started light exercises. At 6-months postoperatively, complete radiologic union of the fracture was evident. He was symptom free; he resumed at that time a full training program and he returned to play football at preinjury high competition level.ConclusionsCompression plating is a valuable method of treating non-united anterior tibial stress fractures. We believe that anterior tension band plating is superior to intramedullary nailing in managing anterior tibial stress fractures, not only after failure of intramedullary nailing, but also as a first-line surgical treatment. This technique offers advantages, such as no violation of the extensor mechanism and risk of anterior knee pain, and directly addresses the underlying problem of distraction forces acting on the anterior tibial cortex and compromising fracture healing. Especially in high-level athletes, who cannot tolerate prolonged inactivity, early surgical intervention of anterior tibial stress fractures with tension band plating is a reliable option that can accelerate recovery.

The Role of Taylor Spatial Frame in the Treatment of Blount Disease.

Alteration of the posteromedial part of the proximal tibia is the main characteristic of Blount's disease and if left untreated, leg alignment and normal development of the lower limbs may be compromised. To report treatment outcomes in children with Blount's disease using the Taylor Spatial Frame (TSF). From January 2007 to December 2014, 16 young children (24 tibia) with a mean age of 7.5 years (range of 3-14 yrs) and severe Blount's disease were treated using TSF. Preoperative long standing radiographs were performed and anatomic medial proximal tibial angle (MPTA), diaphyseal-metaphyseal tibial angle (Drennan), femoro-tibial angle and leg length discrepancy (LLD) were measured. Post-operative improvement of all measurements was observed. MPTA increased from a mean of 71.8° (58° - 79°) to 92.5° (90° - 95°), the Drennan decreased from 16.6° (14° - 18°) to 3.6° (0° - 6°), the F-T angle changed from 15.4° (10° - 25°) of varus to 5.9° (2° - 10°) of valgus and the LLD decreased from 208 mm (150-320) to 69 mm (0- +120). Mean follow-up was 45.6 months. According to Paley's criteria pin track infection was present in 6 tibiae, while in 5 patients software changes were necessary. Recurrence was observed in 3 patients (triplets). Complete restoration of the mechanical axis was obtained at the end of the treatment. In the last decades, different surgical treatments have been proposed for Blount's disease (tension band plate, staples, osteotomies using external or internal fixation). External fixation using the TSF allows gradual safe correction of multiplanar deformities and is a well-tolerated technique by patients with Blount's disease.

Vertical shear pelvic injury: evaluation, management, and fixation strategies.

Vertical shear pelvic ring fractures are rare and account for less than 1% of all fractures. Unlike severely displaced antero-posterior compression and lateral compression pelvic fractures, patients' mortality is lower. Nevertheless, patients must be managed acutely using well-defined ATLS protocols and institution-specific protocols for haemodynamically unstable pelvic ring fractures. The definitive treatment of vertical shear pelvic fractures is however more controversial with a paucity of literature to recommend the ideal reduction and fixation strategy. While the majority of injuries can be reduced and fixed in a closed manner, orthopaedic traumatologists should be familiar with the contraindications to those techniques as well as options such as tension band plating and lumbo pelvic fixation. Our paper reviews the acute management, associated injuries and definitive reduction and fixation strategies of vertical shear pelvic fractures. In addition, we propose a treatment algorithm for the selection of the most appropriate fixation technique.

Orthopaedic Management of Leg-length Discrepancy in Proteus Syndrome: A Case Series.

Proteus syndrome (PS) is a rare mosaic disorder comprising asymmetric bony and soft tissue overgrowth leading to significant morbidity. Placement of growth inhibition hardware with subsequent epiphyseal arrest improves leg-length and angular deformities in pediatric patients without PS. The purpose of this study was to review the surgical approach and present outcomes, complications, and recommendations in 8 patients with PS and leg-length discrepancy (LLD). We conducted a retrospective chart review of 8 patients with PS whose primary reason for surgery was LLD. Patients were eligible if they met clinical diagnostic criteria for PS and if the National Institutes of Health team performed at least 1 of their surgical interventions between 2005 and 2015. Surgical techniques included growth inhibition, with tension band plates, applied ≥1 times, and epiphyseal arrest. Eight patients, followed for an average of 4.6 years (range, 1.0 to 7.1 y) after the index procedure, were included in this analysis. Average age at first LLD surgery was 9.4 years (range, 6.1 to 13.6 y); the average LLD was 3.4 cm (range, 0.4 to 7.0 cm) at presentation, and 5.0 cm (range, 1.8 to 10.0 cm) at the time of the first LLD surgery. Participants underwent 23 total surgeries (range, 1 to 5 per patient) and 7 patients have completed surgical intervention. For the 7 patients who did not require overcorrection the average LLD at the last clinical encounter was 2.6 cm (range, 0.6 to 7.2 cm). We encountered 2 complications: 2 patients developed mild knee valgus, which responded to standard guided growth techniques. This case series suggests that growth inhibition and epiphyseal arrest in children with PS can reduce LLD with few complications. Careful monitoring, rapid mobilization, deep venous thrombosis prophylaxis, and sequential compression devices were also integral elements of our surgical protocol. Level IV.

Torsional Growth Modulation of Long Bones by Oblique Plating in a Rabbit Model.

There is evidence that oblique tension band plating can affect torsional growth in long bones. This study sought to determine if the torsional growth could be modulated based on the angles of the tension band plating and whether or not oblique plating affected overall longitudinal growth. New Zealand White rabbits (10.5 wk old) had one screw placed on the metaphyseal side and one on the epiphyseal side of both medial and lateral sides of the right knee distal femoral physis. The sham group (n=5) included screw placement only. For the plate group (n=13), unlocked plates, angled from 0 to 76 degrees, connected the screws and spanned the physis. Radiographs were taken at biweekly intervals. After 6 weeks of growth, hindlimbs were harvested and microCT scans performed. Femoral length, distances between screw heads and angle between the plates were measured on radiographs. Femoral length differences were compared between groups. Femoral version was measured from 3D microCT. Plate angle changes were correlated to the difference in femoral version between limbs using Pearson correlation (significance was set to P<0.05 for all comparisons). Femur length difference between the contralateral and the operative side was significantly greater in the plate group compared with the sham group over time (P=0.049). Medial and lateral screw distances changed significantly more in the sham group than the plate group on both sides (P<0.001). A greater initial angle between plates resulted in a greater change in the angle between plates (P<0.001). Significant correlations were found between right-left side femoral version differences and initial plate angle (P=0.003) and plate angle change (P=0.014). The torsional effect of oblique plating seems to correlate with the amount of initial plate angle, with an additional, not negligible, longitudinal growth effect. Placing plates at given angles across open physes may result in predictable changes in bone torsion allowing for a safer and less invasive option when treating childhood torsional deformities, but the resulting shortening of the ipsilateral femur must be considered.

Guided growth: preliminary results of a multinational study of 967 physes in 537 patients.

BackgroundGuided growth by tension band plating is commonly used to correct coronal plane deformity. The purpose of this study was to measure the effect and further define parameters that influence results in coronal plane deformity around the knee.MethodsThe retrospective multicentre study included data on 967 physes in 537 patients, with an average follow-up of 16 months after plate insertion. Alignment analysis was compared preoperatively and in at least two measurements postoperatively, as well as with parameters that influence the rate and amount of correction.ResultsAverage age at plate implantation was 11.35 years (SD 3.29).Of those with femoral deformities, 85% of the patients finished the treatment and of those, 70% were corrected to standard alignment, while 14% have not yet achieved correction, and are still growing.Of those with tibial deformities, 75% of the patients finished the treatment and of those 80% were corrected to standard alignment, while 25% have not yet achieved correction and are still growing.The calculated rate of correction was 0.77°/month for the femur and 0.79°/month for the tibia.In terms of complications, the overall rate of infection was 1.48%. In three patients (0.55%) screw breakage was recorded.Factors found to significantly influence the amount of correction were age at plate implantation and direction of deformity.ConclusionTemporary hemiepiphysiodesis takes the advantage of physiological physeal growth to effectively treat angular deformities. Success of treatment is influenced by the age of the patient at plate implantation and direction of deformity.Level of EvidenceIV

The Using of "Guided Growth" for Correction of Coronal Deformities around the Knee in Skeletally Immature Children (Systematic review and Metaanalysis)

Introduction: Angular deformities of the lower limbs are common during childhood. The concept of guided growth using a tension band plate is a breakthrough in the surgical correction of angular deformities. This approach has yielded satisfactory results and has low complication rates. Patients and methods: We reviewed 210 papers with overall 433 patients and 809 deformities. Inclusion criteria included papers published from 2010 to 2017 in English literature. A Meta-analysis was done on 16 papers with seven outcomes: Change in mechanical axis deviation, Tibiofemoral angle, rate of excellent outcomes, implant breakage, implant migration, inadequate reduction and rebound phenomenon. Results: Thirty two studies were included. Fifteen of them studied treatment of angular deformities by guided growth, three of them discussed the complications of using guided growth and five studies discussed Biomechanics of using guided growth. Sixteen studies were included in our cumulative meta-analysis. Conclusion: Guided growth is effective in treating coronal deformities around the knee in skeletally immature children wither the cause was idiopathic or pathological. There is no limitation except if physeal bar is developed or the patient near maturity. Few complications are associated with guided growth techniques including rebound phenomenon, inadequate reduction, implant breakage and implant migration. Level of Evidence: 3 (systematic review of type 1, 2, 3 studies).

Guided growth for angular correction in children: a comparison of two tension band plate designs.

III.

Reduction and temporary stabilization of Tile C pelvic ring injuries using a posteriorly based external fixation system.

Tile C pelvic ring injuries are challenging to manage even in the most experienced hands. The majority of such injuries can be managed using percutaneous reduction techniques, and the posterior ring can be stabilized using percutaneous transiliac-transsacral screw fixation. However, a subgroup of patients present with inadequate bony corridors, significant sacral zone 2 comminution or significant lateral/vertical displacement of the hemipelvis through a complete sacral fracture. Percutaneous strategies in such circumstances can be dangerous. Those patients may benefit from prone positioning and open reduction of the sacral fracture with fixation through tension band plating or lumbo-pelvic fixation. Soft tissue handling is critical, and direct reduction techniques around the sacrum can be difficult due to the complex anatomy and the fragile nature of the sacrum making clamp placement and tightening a challenge. In this paper, we propose a mini-invasive technique of indirect reduction and temporary stabilization, which is soft tissue friendly and permits maintenance of reduction during definitive fixation surgical.

Failure of tension band plating: a case series.

Growth modulation with tension band plates (TBP) has been shown to be a very useful method for the treatment of angular deformities in growing children. Recently, we have observed cases of failure where the epiphyseal screw was drawn through the physis into the metaphysis. This study describes a series of children who developed this complication. Patients who developed TBP failure after operative treatment of lower limb angular deformities were identified from the databases at four institutions over a 5-year period. The medical records were reviewed to record demographics, primary diagnoses, details of the operative procedure, development of physeal arrest, and recurrence of the original deformity. Six patients (five girls) with nine implant failures were identified. The mean age of the children at the time of implant insertion was 7.2 years (range, 4-10 years). The primary diagnoses included hypophosphatemic rickets (n=7), congenital pseudoarthrosis of the tibia associated with neurofibromatosis 1 (n=1), and post-traumatic malunion after distal tibial fracture (n=1). Of the nine TBP that presented with the complication, four were inserted into the medial distal femur (one bilateral case), two into the medial proximal tibia (one bilateral case), two into the lateral distal tibia, and one into the medial distal tibia. None of these patients developed physeal growth arrest at the last follow-up as assessed on the latest radiographs. The use of TBP for guided growth in patients younger than 10 years old with rickets, neurofibromatosis, or other conditions that produce osteopenia leads to an increased risk for implant failure. In these cases, it is important to confirm that the epiphyseal screw has good purchase. Patients with these features should be monitored closely for early detection of this complication.

Triceps Aponeurosis Tongue Shape Flap: A New Technique to Solve the Wound Problem in Olecranon Fracture Fixation

Background: Internal fixations for olecranon fractures, like tension band wiring and plates, have some complications such as prominence of the devices, neurovascular injuries, superficial infection, and skin irritation. In this study, a new triceps aponeurosis tongue shape flap technique was used to solve the problem in patients with olecranon fracture fixation. Materials and methods: Nine patients with olecranon fractures were evaluated. After fixation by tension band wiring and plate, the free aponeurosis triceps muscle in a tongue-shaped flap was used and rotated 180° to cover the whole the pin wire or plate. The surgeon then began to suture it to the anconeus, extensor carpi ulnaris and flexor carpi ulnaris muscles, fully around, with absorbable sutures. The follow-up time was eight weeks and a Mayo elbow performance score (MEPS) was filled for all patients. Results: Nine patients were analysed. Two cases were male and seven was female. The meanage was 49.11±10.37 years. Extension was full in six patients and was 170 in three. Flexion was full in all patients. No complications were recorded. The MEPS results showed that it was good and excellent in all the patients (number for patients was in the range of 80-95). Conclusion: According to results of present study, this technique can help to surgical fixation of olecranon fractures with different devices to have fewer complications, especially prominence of fixator systems and with this method tension band wiring can be remained as a gold standard in olecranon fracture fixation.

Orthopaedic management of leg length discrepancy in Proteus syndrome: a case series

Introduction Proteus syndrome (PS) is a rare mosaic disorder comprising asymmetric bony and soft tissue overgrowth leading to significant morbidity. Placement of growth inhibition hardware with subsequent epiphyseal arrest improves leg-length and angular deformities in pediatric patients without PS. The purpose of this study was to review the surgical approach and present outcomes, complications, and recommendations in 8 patients with PS and leg-length discrepancy (LLD). Methods We conducted a retrospective chart review of 8 patients with PS whose primary reason for surgery was LLD. Patients were eligible if they met clinical diagnostic criteria for PS and if the National Institutes of Health team performed at least 1 of their surgical interventions between 2005 and 2015. Surgical techniques included growth inhibition, with tension band plates, applied ≥1 times, and epiphyseal arrest. Results Eight patients, followed for an average of 4.6 years (range, 1.0 to 7.1 y) after the index procedure, were included in this analysis. Average age at first LLD surgery was 9.4 years (range, 6.1 to 13.6 y); the average LLD was 3.4 cm (range, 0.4 to 7.0 cm) at presentation, and 5.0 cm (range, 1.8 to 10.0 cm) at the time of the first LLD surgery. Participants underwent 23 total surgeries (range, 1 to 5 per patient) and 7 patients have completed surgical intervention. For the 7 patients who did not require overcorrection the average LLD at the last clinical encounter was 2.6 cm (range, 0.6 to 7.2 cm). We encountered 2 complications: 2 patients developed mild knee valgus, which responded to standard guided growth techniques. Conclusions This case series suggests that growth inhibition and epiphyseal arrest in children with PS can reduce LLD with few complications. Careful monitoring, rapid mobilization, deep venous thrombosis prophylaxis, and sequential compression devices were also integral elements of our surgical protocol. Level of evidence Level IV.

Rebound Deformity After Growth Modulation in Patients With Coronal Plane Angular Deformities About the Knee: Who Gets It and How Much?

With observed success and increased popularity of growth modulation techniques, there has been a trend toward use in progressively younger patients. Younger age at growth modulation increases the likelihood of complete deformity correction and need for implant removal before skeletal maturity introducing the risk of rebound deformity. The purpose of this study was to quantify magnitude and identify risk factors for rebound deformity after growth modulation. We performed a retrospective review of all patients undergoing growth modulation with a tension band plate for coronal plane deformity about the knee with subsequent implant removal. Exclusion criteria included completion epiphysiodesis or osteotomy at implant removal, ongoing growth modulation, and <1 year radiographic follow-up without rebound deformity. Mechanical lateral distal femoral angle, mechanical medial proximal tibial angle, hip-knee-ankle angle (HKA), and mechanical axis station were measured before growth modulation, before implant removal, and at final follow-up. In total, 67 limbs in 45 patients met the inclusion criteria. Mean age at growth modulation was 9.8 years (range, 3.4 to 15.4 y) and mean age at implant removal was 11.4 years (range, 5.3 to 16.4 y). Mean change in HKA after implant removal was 6.9 degrees (range, 0 to 23 degrees). In total, 52% of patients had >5 degrees rebound and 30% had >10 degrees rebound in HKA after implant removal. Females below 10 years and males below 12 years at time of growth modulation had greater mean change in HKA after implant removal compared with older patients (8.4 vs. 4.7 degrees, P=0.012). Patients with initial deformity >20 degrees had an increased frequency of rebound >10 degrees compared with patients with less severe initial deformity (78% vs. 22%, P=0.002). Rebound deformity after growth modulation is common. Growth modulation at a young age and large initial deformity increases risk of rebound. However, rebound does not occur in all at risk patients, therefore, we recommend against routine overcorrection. Level IV-retrospective study.

Internal fixation of S1-S3 iliosacral screws and pubic screw as the best configuration for unstable pelvic fracture with unilateral vertical sacral fracture (AO type C1.3).

Although internal fixation is the definitive treatment in unstable pelvic fractures with disruption of the anterior arch and a vertical fracture of the sacrum (AO type C1.3), there have been no agreement of the best technique of internal fixation yet. We aimed to derive comparable objective data on stiffness and load to failure in this type of fracture fixations. Synbone was modified into AO type C1.3 fracture model, while treatments were divided into six internal fixation treatment groups using tension band plate (TBP), symphysis pubis plate (SP) with iliosacral screw at S1 and S2 (IS S1-S2), pubic screw (PS) with iliosacral TBP, PS and IS S1-S2, SP and IS S1-S3, PS and S1-S3 and finally PS and IS S1-S3. Sensor was applied to detect the shifting and rotation of fracture fragments. Mechanical strength test conducted with the application of axial force on the sacrum vertebra (S1). The highest translational stiffness was observed in the group IS S1-S3 + PS (830.36 N/mm, p = 0.031) and there was no difference on the rigidity of the rotation between the groups posterior fixation using IS S1-S2 and IS S1-S3 ( p = 0.51). Meanwhile the highest load to failure was found in group IS S1-S3 + PS (1522.20 N). PS provided advantages compared to the use of plate. Group of PS and S1-S3 IS is the configuration of internal fixation with best translational and rotational stiffness and the largest load to failure compared to other techniques in AO type C1.3 fracture.

Progress in treatment of elbow fracture-dislocation combined with coronary fractures

Elbow fracture-dislocations are typically high-energy injury. Fractures of the coronoid process are usually part of this injury. Successful management of elbow fracture-dislocations associated with coronoid fracture requires recognition of the injury pattern and early treatment to obtain adequate elbow stability. Although some special cases of terrible triad of the elbow can be managed non-operatively, the majority of the frac-ture-dislocations are repaired by surgery. Tip fractures are usually repaired with a lasso suture, steel wire tension band or loop plating along with repair or replacement of the radial head and the lateral collateral ligament. Fractures of the anteromedial coronoid are theorized to occur from varus posteromedial rotatory injury. A subset of the injury can be managed non-operatively. Internal fixation with a buttress plate and reattachment of the lateral collateral ligament is recommended for injuries associated with large fracture fragments or elbow instability. Transolecranon fracture-dislocations are best treated surgically with stable restoration of the trochlear notch. If the elbow is still unstable, it is required to repair the medial collateral ligament or to apply hinged external fixators to maintain concentric reduction and initiate early exercises. Key words: Elbow joint; Dislocations; Fractures, bone; Surgical procedures, operative

Limits of Growth Modulation Using Tension Band Plates in the Lower Extremities.

Growth modulation using tension band plates (TBP) has been shown to be a safe, effective, and popular method for correcting pediatric frontal plane angular deformity around the knee. Recently, TBPs have been used to achieve reversible epiphysiodesis to treat limb-length discrepancy. Many surgeons have expanded the indications to include diagnoses other than frontal plane angular deformities, anatomic sites other than the knee, and correction of sagittal and oblique plane deformities. Despite the rapid acceptance of TBPs, the limits of this option have not been explored. We undertook a systematic literature review and found that the success rate for idiopathic cases approaches 100% with a low complication rate. Pathologic cases have a slightly lower success rate and a higher complication rate. The potential to avoid osteotomy with growth modulation makes TBPs a reasonable option for all but the most extreme pediatric frontal and sagittal plane lower extremity deformities. Applications to hip deformities remain unproven.

Guided growth for tibia vara (Blount's disease).

Blount's disease is commonly attributed to an intrinsic, idiopathic defect in the posteromedial proximal tibial physis resulting in progressive bowing of the leg, intoeing, and lateral knee thrust. Treatment has historically included bracing, physeal stapling, or corrective osteotomy, and was determined primarily by age at presentation. As we feel the pathology is not necessarily age dependent, we have elected to use the technique of guided growth using a lateral tension band plate to correct limb alignment as a first-line treatment in all patients presenting to our clinic as long as they had growth remaining and no evidence of a physeal bar.We identified 17 patients with tibia vara (27 limbs) who were managed by means of guided growth of the proximal tibia, from age 1.8 years to 15.1 years. Clinical and radiographic parameters were followed pre- and postoperatively. The response to guided growth was documented as were any related complications.Twenty-one (78%) limbs had complete normalization of their mechanical axis (middle 50% of knee). Time to correction averaged 13.5 months (8–19 months). There were no peri-operative complications. We observed hardware failure in 3 patients; 2 with screw breakage and 1 patient with hardware migration, none requiring subsequent osteotomy or further treatment. Two patients had rebound varus: one is being observed and another has undergone a repeat procedure.Patients with pathologic tibia vara present at various ages and have historically undergone various treatments ranging from bracing to tibial osteotomy based on age at presentation. We have found that guided growth utilizing tethering plates can be used effectively as first-line treatment in all patients with growth remaining. This minimally invasive method is predictable and well tolerated. Recurrent deformity, though unlikely, is easily remedied by repeating the process and does not preclude osteotomy if eventually needed. Concomitant resolution of ligamentous laxity and inward torsion can be anticipated as the mechanical axis is restored to neutral. The only contraindications for guided growth include an unresectable physeal bar or skeletal maturity.

Rotational gait patterns in children and adolescents following tension band plating of idiopathic genua valga.

Literature suggests that children and adolescents with idiopathic genua valga present with considerable gait deviations in frontal and transverse planes, including altered frontal knee moments, reduced external knee rotation, and increased external hip rotation. This study aimed to evaluate gait parameters in these patients after surgical correction using tension band plating (TBP). We prospectively evaluated 24 consecutive, skeletally immature patients, who received full-length standing radiographs and three-dimensional gait analysis before and after correction, and compared the results observed to a group of 11 typically developing peers. Prior to TBP the cohort showed significantly decreased (worse) internal frontal knee moments compared to the control group. After axis correction the mean and maximum knee moments changed significantly into normalized knee moments (p < 0.0001). In the transverse plane, only the foot progression angle (p = 0.020) changed significantly following intervention. Post-correction knee moments were similar to controls (p = 0.175), but the patient cohort exhibited a significantly decreased knee external rotation (p = 0.004) and increased external hip rotation (p < 0.001) during gait. In addition, the effect of transverse plane changes on knee moments in patients with restored, straight limb axis was calculated. Hence, patients with restored alignment but persistence of decreased external knee rotation demonstrated significantly greater knee moments than those without rotational abnormalities (p = 0.001). This study found that frontal knee moments during gait normalized in children with idiopathic genua valga after surgery. However, decreased external knee rotation and increased external hip rotation during gait persisted in the study cohort. Despite radiological correction, decreased external rotation during gait was associated with increases in medial knee loading. Surgical correction for children with genua valga but normal knee moments may be detrimental, due to redistribution of dynamic knee loading into the opposite joint compartment. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1617-1624, 2017.

Correction of angular deformities caused by osteochondrosis using a tension band plate in a Siberian husky

A 4-month-old intact male, Siberian husky dog, weighing 14.6 kg, was initially presented to the Gyeongsang National University Animal Medical Center (GAMC) with a history of bilateral forelimb lameness and angular deformity. Physical examination revealed forelimb lameness and valgus deformities. Radiography showed a conical shaped, radiolucent, thickened and irregular marginated distal growth plate in both distal ulnar physis. Thickening of distal growth plate also was evident at both the distal radial physis, and the presence of osteophytes was observed. A diagnosis of angular deformity was made on the basis of a shortened ulna associated with osteochondrosis. Temporary hemiepiphysiodesis was implemented by surgical insertion of tension band plate. The plates were implanted for 6 weeks. Pre- and post-operative radiographs of both forelimbs were evaluated to determine the angle of frontal plane alignment (FPA) and sagittal plane alignment (SPA) over a 8-week period. FPA was corrected into the normal range in the right forelimb, and SPA was close to the reference range in the both forelimbs. Furthemore, a reduction in osteochondrosis was revealed by radiography. This case report establishes that temporary hemiepiphysiodesis with a tension band plate should be option in dogs with angular deformities during a growing period and is minimally invasive with a lower morbidity than traditional osteotomy. Moreover, this treatment facilitates the resolution of osteochondrosis lesions.

Solid screw insertion for tension band plates: A surgical technique tip

PurposeGrowth modulation with tension band plates (TBPs) and cannulated screws is the current mainstay of treatment for pediatric lower extremity angular deformities. Solid screws have been used as an alternative to cannulated screws to decrease the risk of screw failure, particularly in obese children. The downside of solid screws is the decrease in precision of placement. This study describes a surgical technique to insert solid TBP screws accurately.MethodsTBP insertion starts with the same conventional steps by inserting the guidewires into the epiphysis and metaphysis, straddling the physis. After fluoroscopic confirmation of the position of the guidewires, the cannulated drill bit is used to broach the cortex to a depth of 5 mm in the bone. A standard 4.5-mm cannulated screw from the TBP set is used to tap the screw tract over the guidewires for approximately three-quarters of the planned screw length. After removing the guidewires, the solid screws are then inserted in each hole to follow the tapped tracts.ResultsThis technique was used in five patients including four with Blount disease and one with bilateral genu varum.ConclusionIt is recommended to use solid screws with TBPs in patients with a high body mass index to avoid screw fracture. Our technique describes using a cannulated screw as a tap to create a tract to ease accurate insertion of the solid screws, and prevent the solid screw from deviating outside the desired path.