Optimization Of Tensile Strength Research Articles

Optimization of Tensile Strength and Shrinkage on R-Abs and Abs Blend using Taguchi and Pcr-Topsis Method

Optimization of Tensile Strength and Shrinkage on R-Abs and Abs Blend using Taguchi and Pcr-Topsis Method

Optimization of tensile strength in 3D printed PLA parts via meta-heuristic approaches: a comparative study

Optimization of tensile strength in 3D printed PLA parts via meta-heuristic approaches: a comparative study

Optimization of Tensile Strength in the Paper Material Cutting Process Based on CO2 Laser Process Parameters

This paper examines the impact of the CO2 laser parameters on the tensile strength, which is one of the most important properties of paper packaging in the process of cutting paper material. The study was performed on a paper material sample Fbb Board/Ningbo Spark C1S Ivory Board by examination of the influence of four independent variables: paper material grammage, cutting speed, laser power, and resolution on the tensile strength by using definitive screening design. Optimum process conditions of four variables that maximize the tensile strength were predicted and validated accordingly. Results confirm that laser power, paper material grammage, and cutting speed are the main process parameters that mostly affect the tensile strength. Besides individual parameters, two statistically significant interactions were obtained: laser power and cutting speed, and cutting speed and laser resolution. Maximum tensile strength values (20.37 N/mm) were achieved using the laser power of 60.6%, cutting speed of 3.24%, resolution of 2500 Hz, and a paper material grammage of 326.85 g/m2. With laser power at middle values and at a lower speed, a maximum tensile strength value can be obtained. Increasing the laser power and cutting speed will produce a slight lowering of tensile strength.

Optimization of Tensile Strength and Young's Modulus of CNT-CF/Epoxy Composites Using Response Surface Methodology (RSM).

Composites such as carbon fiber are used extensively by automotive, aerospace, marine, and energy industries due to their strong mechanical properties. However, there are still many areas it is lacking in testing, especially related to its electrophoretic deposition. In this research work, the tensile strength and Young’s modulus of CNT–CF/epoxy composites were measured using the tensile test by varying the electrophoretic deposition (EPD) process parameters. Response surface methodology (RSM) was used to optimize the three main parameters in this EPD process: the volume ratio (water as the basis), deposition voltage, and time to obtain the maximum tensile properties of the composites. There were four volume ratios (0%, 20%, 80% and 100%) used in this design of experiment (DoE) with ratios’ pairs of 0%, 100%, and 20%, 80%. For this study, water and methanol were used as the suspension medium. This design’s deposition voltage and time were 10 to 20 V and 5 to 15 min. ANOVA further verified the responses’ adequacy. The optimum conditions for the first Design of Experiment (DoE) (0% and 100%) were identified as a volume ratio of 99.99% water, deposition voltage of 10 V, and 12.14 min. These conditions provided the maximum strength of these composites with a tensile strength of 7.41 N/mm2 and Young’s modulus of 279.9 N/mm2. Subsequently, for the second DoE (20% and 80%), tensile strength of 7.28 N/mm2 and Young’s modulus of 274.1 N/mm2 were achieved with the ideal conditions: volume ratio of 44.80% water, deposition voltage of 10.04 V, and time of 6.89 min. It can be concluded that the ideal interaction between these three EPD parameters was necessary to achieve composites with good tensile properties.

Optimization of wire type and current welding on the strength of welding connection in two types of material testing via response surface methodology

The number of types of wire welding that circulate on the market and the development of welding technology, especially related to current welding, create a lack of information related to the quality of welding results for several types of materials. This can cause the strength of the welding connection to not be maximized. Therefore, this study aims to optimize the use of three types of wire welding and three current welding on the strength of the welding connection in two types of material testing using the response surface methodology. Box-Behnken, coupled with the RSM and the desirability function, was used to optimize the strength of the welding connection of the wire types (RD-46, LB-52, and RB-26), and current welding (100, 130, and 160 A) against two types of material testing (IWF-150 and ASTM-A517-G70). The strength of the welding connection observed in response included the tensile strength, Charpy impact-absorbed energy, hardness values in the welding metal and the hardness values in the main metal. Optimization of the strength of the welding connection in this study recommends the application of wire types RB-26, current welding of 100 A, and ASTM-A517-G70 material testing with the highest desirability value of 71.6%. Optimization of tensile strength, Charpy impact-absorbed energy, hardness values in welding metal, and hardness values in main metal by applying this parameter are 575.64 MPa, 110.69 J, 216.75 (HV10) and 126.6 (HV10), respectively. The results proved that an appropriate welding connection strength could be achieved using wire welding types and current welding in material testing.

Analysis and Optimization of Tensile Strength for Loess Stabilized by Calcium Carbide Residue

Analysis and Optimization of Tensile Strength for Loess Stabilized by Calcium Carbide Residue

Rubber Strap Quality Improvement by Optimization of Tensile Strength and Time Curing Using Response Surface Methodology

Rubber Strap Quality Improvement by Optimization of Tensile Strength and Time Curing Using Response Surface Methodology

Optimization of Tensile Strength and Shrinkage of Talc-Filled Polypropylene as a Packaging Material in Injection Molding

Polypropylene (PP), as a rigid and low-cost packaging material, has been used to make many packaging products such as containers, tubs, buckets, and various closures, etc. The addition of talc in PP brings many benefits such as enhanced stiffness, lower coefficient of thermal expansion, reduced water vapor and oxygen transmission, etc. Thus, talc-filled polypropylene (TFPP) has been widely used in packaging and automotive industry. For injection-molded TFPP packaging products, tensile strength and dimensional accuracy are two important quality characteristics. Both are heavily influenced by the molding conditions. One molding window for enhancing the tensile strength may not be favorable to shrinkage control and dimensional accuracy. This paper presents a Taguchi-based design approach, developed for multi-objective optimization, with the combined goals of maximizing the tensile strength and minimizing the shrinkage of injection-molded TFPP parts under the same molding condition. With the Taguchi optimization approach, it turned out that the tensile strength was increased from 22.07 to 24.40 MPa and the shrinkage was reduced from 3.25 to 2.28%. The optimizing approach and the tensile and shrinkage behaviors of TFPP can be used in other manufacturing processes, wherein two or more quality objectives are to be optimized.

Optimization of tensile strength in TIG welding using the Taguchi method and analysis of variance (ANOVA)

The main criteria discussed in this paper concern the welding optimization parameters and tensile strength of duplex stainless steel 2205 by tungsten inert gas welding based on Taguchi method and analysis of variance. Taguchi method of orthogonal L9 design experiment is carried out using orthogonal array for defining the problem occur on welding process and to reduce the error occurred in the neural network for the prediction of output. The neural network is a mathematical prediction model for the optimization process using back propagation algorithm. Analysis of variance (ANOVA) is a decision tool for detecting the variation of process parameters, it is a statistical technique for find out the optimal level of factors for the verification of the optimal design parameters through confirmation experiments. The purpose of this paper to increase the tensile strength, hardness and depth of weld by varying the parameters such as current, time, speed, variation of oxide fluxes, electrode diameter and gas flow rate. The Mat lab software is used for analyzing results and it shows that neural network coupled with Taguchi method and Anova is an effective method for optimizing the weld quality of material.

Optimization of Tensile Strength during Ultrasonic Lap Welding of Dissimilar Metals Using Taguchi’s Philosophy

Ultrasonic welding (USW) is a solid-state joining process in which the joint is created between the workpieces by the application of high frequency ultrasonic waves under pressure. Poor weld strength is one of the major problem experienced in the application of such weldments. It is mainly due to improper selection of process parameters. In order to achieve satisfactory weld strength optimization of welding process parameters is indeed essential. In this present context, the USW has been carried out to join dissimilar materials like A1100 aluminum alloy and CuZn37 brass plates of thickness 0.1 mm using Taguchi’s L16 orthogonal array design of experiments. The process parameters like amplitude, weld pressure and weld time have been taken into consideration. Taguchi’s S/N ratio concept has been employed to study the effect of different process parameters on the response like tensile strength; and finally, the optimum setting of process parameters has been decided in view of maximizing tensile strength. The predicted result of the optimized tensile strength has been validated by conducting a confirmatory test. This analysis shows that the high quality and efficient joints can be generated by exploring optimized setting of process parameters which is fruitful in mass production as well as off-line quality control of such a welding practice.

Investigation on Mechanical Properties of Pulsed Nd:YAG Laser Welding on AISI 304 Stainless Steel to AISI 1008 Steel

Product with low cost, lightweight and enhanced mechanical properties were the main reasons welding dissimilar materials thrived by most of the industries. The laser welding technique which has high-energy density beam was found suitable of carrying this task. This paper attempts to investigate welding of AISI 304 stainless steel to AISI 1008 steel through Nd:YAG pulse laser method. The main objective of this study was to find out the weldability of these materials and investigate the mechanical properties of the welded butt joints. Peak power, pulse duration and weld speed combinations were carefully selected with the aims of producing weld with a good tensile strength, minimum heat affected zone (HAZ) and acceptable welding profile. Response surface methodology (RSM) approach was adopted as statistical design technique for tensile strength optimization. Statistical based mathematical model was developed to describe effects of each process parameters on the weld tensile strength and for response prediction within the parameter ranges. The microstructure of the weld and heat affected zones were observed via optical microscope. The results indicate the developed model can predict the response within ±9% of error from the actual values.

Optimization of Tensile Strength and Ductility of Grade 2 Ti, Conditioned by Severe Plastic Deformation

Among the materials employed for orthopedic implants, Ti-6Al-4V is definitely the best choice due to its excellent properties. However, a more intense use is hindered by high cost and the presence of harmful elements, viz. Al and V. A solution can be found in commercially pure Ti, provided its tensile and fatigue properties can be upgraded by some process of Severe Plastic Deformation. In the present work, Grade 2 Ti was submitted to up to four Equal Channel Angular Pressing passes, followed by cold rolling (30 70 and 90% reduction ratio) Hardness and tensile properties were determined, paying attention to the work hardening behavior. Results show that Severe Plastic Deformation gives a 442 MPa increase over the yield strength of annealed Grade 2 Ti (originally 337 MPa), while elongation reached 21%. Best results were obtained with four passes followed by 70% cold rolling reduction. Finally, the microstructural stability was assessed by hardness measurements.

Tensile strength optimization and characterization of chitosan/TiO 2 hybrid film

This text prepared the chitosan/TiO 2 hybrid film by sol–gel method and optimized the tensile strength through the response surface method (RSM). Based on single factor experiment, it studied the influence of chitosan, acetic acid, tetrabutyl titanate (TBT) and normal butyl alcohol mixture using a full factorial design. The optimum proportion of these three factors was calculated through retrogressive method: chitosan is 0.27 g, acetic acid is 11.6 ml and the mixture is 0.54 ml. Under present condition, the forecast value of tensile strength is 1731 cN nearly to the experimental data. FT-IR, X-ray powder diffraction (XRD), and thermogravimetric analysis (TGA) were used to characterize the as-obtained hybrid nanostructures. It indicates Ti O bond is formed in the hybrid film through IR spectra and TiO 2 is amorphous in the hybrid film toward XRD. TGA demonstrates that the chitosan/TiO 2 hybrid film exhibits better thermal stability.

The stress transfer efficiency of a single-walled carbon nanotube in epoxy matrix

This paper investigates the effects of tube length and diameter on the distributions of tensile stress and interfacial shear stress of a single-walled carbon nanotube in epoxy matrix. It was shown that a smaller tube diameter has a more effective reinforcement and there exists an optimal tube length at which reinforcement is maximized. It was also found that a carbon nanotube has a greater stress transfer efficiency than a solid fibre, providing flexibility for toughness and tensile strength optimization.