Abstract
Product with low cost, lightweight and enhanced mechanical properties were the main reasons welding dissimilar materials thrived by most of the industries. The laser welding technique which has high-energy density beam was found suitable of carrying this task. This paper attempts to investigate welding of AISI 304 stainless steel to AISI 1008 steel through Nd:YAG pulse laser method. The main objective of this study was to find out the weldability of these materials and investigate the mechanical properties of the welded butt joints. Peak power, pulse duration and weld speed combinations were carefully selected with the aims of producing weld with a good tensile strength, minimum heat affected zone (HAZ) and acceptable welding profile. Response surface methodology (RSM) approach was adopted as statistical design technique for tensile strength optimization. Statistical based mathematical model was developed to describe effects of each process parameters on the weld tensile strength and for response prediction within the parameter ranges. The microstructure of the weld and heat affected zones were observed via optical microscope. The results indicate the developed model can predict the response within ±9% of error from the actual values.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.