Tensile Modulus Research Articles

Description of non-ideal effects in composite membranes by a new theoretical approach

In present study, a theoretical model is introduced to calculate the gas permeability of mixed matrix membranes (MMMs) containing porous fillers. This model is based on analogy of gas permeation in MMMs with tensile modulus in composites. The representative parameters of MMM morphologies such as polymer chains tightening around the filler (β<1), unselective channel formation (β>1) and polymer chains penetrating into filler pores (0≤α≤1) which leads to the filler pore blocking are all included in the model. Furthermore, the interphase thickness (t) which is a critical parameter of MMMs participates in calculation equation along with the other parameters. To validate the proposed model, an experimental study with poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) blend as polymer matrix and zeolite 4A and NH2-MOF-199 as fillers is performed. The obtained gas permeability data of constructed MMMs and some of the literature data are employed to be fitted with the proposed model. The details of the existence morphologies of MMMs can be described by earning the mentioned parameters ranges. Therefore, by this model, by having a measure of t, the gas permeation of MMM can be achieved accompany with details of the related morphologies. All the theoretical investigations are done utilizing one equation which contains all parameters simultaneously.

Enhancement of tensile strength and elastic modulus using bio-waste based carbon nanospheres doped polymer nanocomposites

Enhancement of tensile strength and elastic modulus using bio-waste based carbon nanospheres doped polymer nanocomposites

Synthesis of star‐shaped epoxy resin with excellent mechanical properties using triazine as a skeleton

AbstractThe high‐performance development of advanced resin matrix composites has resulted in higher requirements for the mechanical strength and toughness of epoxy resin matrices. However, enhancing the toughness of the epoxy resin while maintaining its mechanical strength remains a considerable challenge. In this study, we utilized triazine rings as the skeleton, and introduced flexible chain segments and other forces into the polymer cross‐linked network to fabricate a star‐shaped epoxy resin (CNE) with exceptional mechanical properties. Benefiting from its meticulously designed rigid‐flexible integrated structure, after curing by 4,4′‐diaminodiphenylmethane (DDM), it demonstrated outstanding mechanical properties. The storage modulus of CNE/DDM was measured at up to 5.48 GPa; moreover, its tensile modulus and strength went as high as 5.04 GPa and 134.72 MPa respectively, and it also exhibited an elongation at break of up to 3.35%. The mechanical properties of CNE/DDM are far superior to those of AFG‐90 (N,N‐diglycidyl‐4‐glycidyloxyaniline)/DDM. Over all, the findings of this study thus provide an effective synthesis pathway toward achieving epoxy resins with high modulus, strength, and toughness.

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber’s capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 µm and 772 µm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Starch-based films affected by the addition of collagen from Prochilodus magdalenae residues and HPMC: Application in Andean blackberry (Rubus glaucus Benth) coatings.

Starch-based films offer the advantages of biodegradability, edibility, barrier properties, flexibility, and adaptability. This study compared the physicochemical properties of starch-based films by adding raw fish collagen and hydroxypropylmethylcellulose (HPMC). The tensile properties were evaluated, and the interaction with water was analyzed. Barrier properties, such as water vapor and oxygen permeability, were examined, and optical properties, such as gloss and good internal transmittance, were evaluated. The films were evaluated as coatings on Andean blackberries (Rubus glaucus Benth) for 2 weeks at 85% RH and 25°C. The results showed that the inclusion of collagen caused a reduction in the tensile strength and elastic modulus of the films. Also, the formulation with the highest collagen concentration (F7) exhibited the lowest weight loss and water vapor permeability, also it had the highest collagen concentration and showed the highest reduction in Xw and WAC, with values of 0.048 and 0.65 g water/g dry film, respectively. According to analyzing the optical properties, F1 presented the highest bright-ness and transmittance values, with 18GU and 82 nm values, respectively. In general, the films and coatings are alternatives to traditional packaging materials to prolong the shelf life of these fruits.

Analysis of Fracture Damage Mechanical Properties of Particle Reinforced Polymer Composite Film Based on Micro-macro Finite Element Method

Abstract The particle reinforcement and related effect on fracture damage mechanical properties of polymers have been studied in this paper. Based on the uniaxial tensile test result of particle reinforced PVDF composites, the parameters of macro elastic-plastic finite element model and the micro particle reinforced model are obtained. The effects of boundary conditions, shape and size of damage notch on fracture damage mechanical properties of PVDF composites are studied from macroscopic view. The uniaxial tensile mechanical properties and elastic modulus are increased with notch angle. The damage analysis of the micro model shows that the reinforcement of composite is best when the content of SiO2 is 6%. Debonding between particles and matrix indicates have great effect on crack propagation. The micro-macro finite element model is effective tool to study the damage mechanical properties of particle reinforced polymers.&amp;#xD;

Epoxy/Graphene Nanoplatelet (GNP) Nanocomposites: An Experimental Study on Tensile, Compressive, and Thermal Properties

This paper presents an experimental investigation of nanocomposites composed of three ratios of epoxy/graphene nanoplatelets (GNPs) by weight. The 0.1, 0.2, and 0.3 wt.% specimens were carefully manufactured, and their mechanical and thermal conductivity properties were examined. The tensile strength and modulus of epoxy/GNPs were enhanced by the large surface area of graphene nanoplatelets, causing crack deflection that created new fracture fronts and friction because of the rough fracture surface. However, the compressive strength was gradually reduced as GNP loading percentages increased. This was probably due to severe plastic yielding on the epoxy, leading to catastrophic axial splitting caused by premature fractures. Furthermore, the highest thermal conductivity was 0.1283 W/m-K, representing a 20.92% improvement over neat epoxy (0.1061 W/m-K) when 0.3 wt.% GNPs were added to the epoxy. This was because of efficient heat propagation in the GNPs due to electron movement through percolative paths. The tensile failure mode in epoxy/GNP nanocomposites showed a few deflected and bifurcated rough cracks and brittle, dimple-like fractures. Contrarily, compressive failure mode in GNP-added epoxy showed plastic flexural buckling and brittle large-axial splitting. The epoxy/GNP nanocomposites were considered a damage-tolerant material.

Lightweight, Strong, and Transparent Wood Films Produced by Capillary Driven Self-Densification.

Wood delignification and densification enable the production of high strength and/or transparent wood materials with exceptional properties. However, processing needs to be more sustainable and besides the chemical delignification treatments, energy intense hot-pressing calls for alternative approaches. Here, this study shows that additional softening of delignified wood via a mild swelling process using an ionic liquid-water mixture enables the densification of tube-line wood cells into layer-by-layer sheet structures without hot-pressing. The natural capillary force induces self-densification in a simple drying process resulting in a transparent wood film. The as-prepared films with ≈150µm thickness possess an optical transmittance ≈70%, while maintaining optical haze >95%. Due to the densely packed sheet structure with a large interfacial area, the reassembled wood film is fivefold stronger and stiffer than the delignified wood in fiber direction. Owing to a low density, the specific tensile strength and elastic modulus are as high as 282MPacm3g-1 and 31GPacm3g-1. A facile and highly energy efficient wood nanotechnology approach are demonstrated toward more sustainable materials and processes by directly converting delignified wood into transparent wood omitting polymeric matrix infiltration or mechanical pressing.

Tough bilayer thermo‐responsive hydrogel actuator reinforced by Fe3+ complexation

AbstractHydrogel actuators usually suffer from the poor mechanical property, which hinders their wide applications. In this study, we propose a tough bilayer hydrogel actuator that can respond quickly to temperature. The hydrogels are composed of poly(N‐isopropylacylamide) (PNIPAM) layer and poly(acrylamide‐co‐acrylic acid) (P(AAm‐co‐AAc)) layer strengthened through Fe3+ complexation with carboxyl groups. By optimizing the PNIPAM content, the resulting bilayer hydrogel P(NIPAM0.9/AAm‐co‐AAc)‐Fe3+ exhibits fast and large‐amplitude bending and recovery in response to temperature. It also shows excellent mechanical properties with a tensile strength of 2.54 MPa, tensile modulus of 3.7 MPa, and toughness of 9.4 MJ/m3, respectively. Besides, the multiple noncovalent interactions within the hydrogels, including Fe+‐mediated coordination and hydrogen bonds, can serve as dynamic but stable associations, leading to a good self‐healing ability. The bilayer hydrogel is further made into a gripper that can effectively and sensitively respond to temperature to capture and release an object, showing its potential application in artificial intelligent devices.

Multifunctional 3D-printed composites based on biopolymeric matrices and tomato plant (Solanum lycopersicum) waste for contextual fertilizer release and Cu(II) ions removal

The production of tomatoes faces significant challenges, including the high amount of waste generated during the harvest stage and copper-contaminated soil due to pesticide use. To address these issues and to promote a more sustainable agriculture, innovative biodegradable green composites for contextual controlled soil fertilization and Cu removal were produced by 3D-printing technology. These composites were made by incorporating NPK fertilizer flour and tomato plant waste particles (SLP) into three different biodegradable polymeric matrices: polylactic acid (PLA); a commercial blend of biodegradable co-polyesters (Mater-Bi®, MB) and their blend (MB/PLA, 50:50). Rheological characterization suggested the potential processability of all of the composites by FDM. Morphological analysis of printed samples confirmed the good dispersion of both filler and fertilizer, which also acted as reinforcement for MB and MB/PLA composites. SLP and NPK moduli were evaluated by powder nanoindentation and, for almost composites, the theoretical Halpin-Tsai model satisfactorily fitted the actual tensile moduli. The decrease in NPK fertilizer release rate and the increase in Cu(II) removal efficiency were achieved using whole 3D-printed composites. By selecting the appropriate matrix and incorporating SLP particles, it was possible to tune the NPK release rate and achieve copper absorption efficiency. Notably, MB samples containing SLP particles displayed the fastest release and the highest Cu(II) removal efficiency.Graphical abstract

Thermo‐mechanical properties of epoxy composites filled with inorganic particulate fillers for robust solder mask application

AbstractFiller components play a crucial role as thermo‐mechanical reinforcement to the epoxy‐based solder mask, ensuring effective insulation and passivation. This study investigates the impact of different inorganic filler types (talc, silica (SiO2), boron nitride (BN) and barium sulfate (BaSO4)) and loadings (5 and 15 wt%) on the tensile and thermal properties of the epoxy composites. The composites were blended, cast and thermally cured. Of these composites, only 15 wt% SiO2/epoxy composite exhibits notable increments in both tensile strength and modulus, surpassing unfilled epoxy by 11.65% and 31.9%, respectively. It also displays the highest elongation at break, supported by small particle size, high specific surface area and minimal void volume fraction. For thermal tests, the addition of all fillers increases the storage modulus in both glassy and rubbery regions, especially 15 wt% talc/epoxy composite with 30.09% increment at 25 °C. Additionally, all fillers raise the glass transition temperature (Tg), notably improving it by 9 °C in the 15 wt% BN/epoxy composite. Moreover, their inclusion generally enhances the onset decomposition temperature (Tonset) and reduces weight loss during decomposition. © 2024 Society of Chemical Industry.

Cellulose fibres enhance the function of hemostatic composite medical sealants.

Tissue adhesives and sealants offer promising alternatives to traditional wound closure methods, but the existing trade-off between biocompatibility and strength is still a challenge. The current study explores the potential of a gelatin-alginate-based hydrogel, cross-linked with a carbodiimide, and loaded with two functional fillers, the hemostatic agent kaolin and cellulose fibres, to improve the hydrogel's mechanical strength and hemostatic properties for use as a sealant. The effect of the formulation parameters on the mechanical and physical properties was studied, as well as the biocompatibility and microstructure. The incorporation of the two functional fillers resulted in a dual micro-composite structure, with uniform dispersion of both fillers within the hydrogel, and excellent adhesion between the fillers and the hydrogel matrix. This enabled to strongly increase the sealing ability and the tensile strength and modulus of the hydrogel. The fibres' contribution to the enhanced mechanical properties is more dominant than that of kaolin. A combined synergistic effect of both fillers resulted in enhanced sealing ability (247%), tensile strength (400%), and Young's modulus (437%), compared to the unloaded hydrogel formulation. While the incorporation of kaolin almost did not affect the physical properties of the hydrogel, the incorporation of the fibres strongly increased the viscosity and decreased the gelation time and swelling degree. The cytotoxicity tests indicated that all studied formulations exhibited high cell viability. Hence, the studied new dual micro-composite hydrogels may be suitable for medical sealing applications, especially when it is needed to get a high sealing effect within a short time. The desired hemostatic effect is obtained due to kaolin incorporation without affecting the physical properties of the sealant. Understanding the effects of the formulation parameters on the hydrogel's properties enables the fitting of optimal formulations for various medical sealing applications.

Production and Characterization of Recycled Polypropylene Composite Reinforced with Cotton Fabric Waste

Composite materials have played an important role throughout human history, from housing early civilizations to enabling future innovations. This study explores the development of composite materials from recycled polypropylene and cotton fabric waste targeted for different applications. The composites were manufactured by the melt-mixing method. The effects of cotton fabric waste content on various composite characteristics were investigated using tensile strength, tensile modulus, flexural strength, flexural modulus, impact strength, compressive strength, and water absorption. The study showed that with an increase in cotton fabric waste content, properties such as tensile strength, tensile modulus, flexural strength, flexural modulus, impact strength, and compressive strength increase up to the optimum level, while a decrease in these properties is observed after the optimal level. The maximum tensile strength of 57.84 MPa, tensile modulus of 1.31 GPa, flexural strength of 55.32 MPa, flexural modulus of 2.7 GPa, impact strength of 33.06 kJ/m2, and compressive strength of 53.68 MPa were obtained. The water absorption rate increased with an increase in the cotton fabric waste weight proportion. From the result of this study, it can be concluded that the optimal mechanical and water absorption properties were achieved at 30% cotton fabric waste content. Therefore, creating composites from recovered polypropylene and cotton fabric waste can have both environmental and financial benefits.

Functionalized boron nitride nanosheets and their polypropylene nanocomposites: influence on thermal, mechanical, rheological and wear behaviour

ABSTRACT The few-layer hexagonal boron nitride (hBN) nanosheets with hydroxyl (−OH) functional group at edges are synthesized using heat treatment of micron size hBN powder followed by sonication. These nanosheets are modified with a silane coupling agent, 3-Aminopropyl,triethoxysilane (APTES). The synthesized hBN nanosheets are mixed with the PP matrix using twin-screw extrusion followed by injection moulding. In case of APTES-modified hBN nanosheets incorporation in the PP matrix with PP-grafted maleic anhydride (PP-g-MA) shows the formation of an imide bond between the MA functional group of PP-g-MA and the amine group of APTES modified hBN nanosheets revealing compatibilization. The flow behaviour index values are lower for hBN nanosheets filled PP nanocomposites showing the improved processability from Rheological characterization. The few-layered – OH and APTES modified hBN nanosheet incorporation in the PP matrix improves the tensile and thermal properties. The incorporation of APTES modified hBN nanosheet in the PP matrix shows an increase in tensile modulus (18.1%) and tensile strength (8.1%) respectively. Wear studies show the incorporation of – OH and APTES modified hBN nanosheets in the PP matrix decreases the coefficient of friction and wear rate significantly. The wear rate at 4 min of wear testing for modified hBN nanosheet in the PP nanocomposites is ~ 96% less in comparison with neat PP. The wear mechanism is established from wear measurements and scanning electron microscopy (SEM) of worn-out wear surfaces of PP nanocomposites.

Basalt/polypropylene composites: The effects of mechanical reprocessing on their morphological, thermal, rheological and mechanical behavior

Considering the increasing spread of basalt fibers on the market as bio-based alternative to glass and the massive use of polypropylene (PP) in the automotive sector, the end-of-life of PP/basalt composites through mechanical reprocessing was addressed. Their thermal, rheological and mechanical properties were investigated up to seven reprocessing cycles and the main relationship between their changes and composites fibers length reduction was disclosed. The composites displayed a parabolic increase in their melt volume rate for increasing reprocessing cycles and were characterized by an improved flowability compared to the neat matrix at the fifth cycle, i.e., 89.3 against 74.8 cm3/10min, due to the intimate contact between the fibers and the matrix which causes a stronger degradation in PP molecular weight. Concerning the mechanical response, the logarithmic decrease in stiffness and strength was not directly proportional to fibers length reduction due to a progressive better orientation of the fibers along the injection direction. Finally, the comparison of the mechanical results obtained with the data available for PP composites reinforced with vegetable fibers allowed to conclude that PP/basalt composites are competitive with this type of composites up to the fifth cycle, displaying a tensile modulus of 3.5 GPa and tensile strength of 38 MPa.

Development and characterization of groundnut shell‐derived biocarbon‐reinforced polylactic acid composite filaments for FDM

AbstractBiochar, a carbon‐rich biomass material has emerged as promising reinforcement and offers versatile applications and potential benefits in various fields, especially in fused deposition modeling (FDM). This study focuses on the development and characterization of groundnut shell‐derived biocarbon (GNSC) reinforced polylactic acid (PLA) filaments for FDM. The GNSC was synthesized through pyrolysis using a tubular furnace at temperatures 700, 800, and 900°C. Synthesized carbon was characterized using Raman spectroscopy, XRD, and SEM analysis. The results showed that the synthesized carbon particles were graphitic, spherical, and nanosized with an average diameter of 40 nm. The preferred biocarbon material, GNSC800 was selected for its high carbon content (98.25%) observed through EDX analysis. Composite filaments were produced with different GNSC800 loadings of 0.25%, 0.5%, and 0.75% using solvent casting and extrusion techniques. Thermal stability was evaluated using TGA and DSC, which showed improved properties with the addition of biocarbon. The mechanical properties and electrical conductivity were enhanced with the inclusion of biocarbon. The data were also validated using ANOVA and Tukey's test. Filament with the 0.5 wt% loading showed the most favorable thermomechanical properties exhibiting a 39.8% increase in tensile strength and a 17.5% improvement in tensile modulus.

Effects of fiber characteristics on tensile and impact properties of long fiber reinforced High‐Density Polyethylene

AbstractDue to the requirements of high stiffness and impact strength of HDPE pipes, in this article, long fiber reinforced HDPE were developed and the effects of fiber length, volume fraction, types, and matrix/fiber interface on the mechanical properties were investigated. Tensile properties, notched impact strength, as well as microstructures were tested. The results showed that fibers increased the tensile strength, modulus, and impact strength, but decreased their plastic deformation. Larger fiber fraction indicates more fibers are involved in load bearing, but easy agglomeration. With ascending fiber length, tensile, and impact strength first increased and then decreased, whereas tensile modulus first increased and then maintained an almost constant value. Carbon fibers showed no advantages over glass fibers and basalt fibers in reinforcing HDPE due to the relatively poor interface bonding strength. Interface modification with KH550 improved the mechanical performance of composites, but the enhancement was limited. More effective methods should be developed for better performance.Highlights Fiber increases strength and modulus, but decreases plastic deformation. Critical fiber length for basalt LFT is 2.6 mm obtained from SEM. Larger fiber volume and length lead to agglomerations. Difference in BF, CF, and GF reinforced HDPE is determined by interface. Interface modification enhances mechanical properties of LFT but limited.

Degradation characteristics of 3D printed continuous fibre-reinforced PA6/chopped fibre composites in simulated saltwater

AbstractThis paper investigates the performance of continuous fibre-reinforced 3D printed components in salt water medium at room temperature. Markforged® Mark Two 3D printer was employed to fabricate standard specimens made of Onyx and reinforced Onyx specimens with continuous carbon, high-strength high-temperature glass, and Kevlar fibres. Aging process was conducted to characterize the long-term effect of salt water on the mechanical behaviour of fibre-reinforced 3D printed samples. Several mechanical tests including tensile, 3-point bending test and indentation testing have been carried out on the dry and aged standard samples to evaluate tensile strength, flexural strength, micro-hardness, and modulus of elasticity in micro-scale. The mechanical tests revealed the degradation and loss in mechanical properties of the printed samples after aging in salt water. The data highlighted that Onyx samples without continuous fibres experienced the most significant reduction in both tensile (33.54%) and flexural (63.47%) strengths after 1 year, while continuous carbon fibre-reinforced Onyx samples showed comparatively lower strength reductions (28.46% in tensile strength and 18.73% in flexural strength). Optical and scanning electron microscopy were performed to investigate the fracture behaviour of the tested specimens. In addition, the DSC assessment showed a slight change in the thermal properties of aged specimens.

The synergy of the matrix modification and fiber geometry to enhance the thermo‐mechanical properties of basalt fiber‐polypropylene composites for automotive applications

AbstractBasalt fiber reinforced polypropylene composites with two initial fiber lengths (3.2 and 6.4 mm) were fabricated using twin‐screw extrusion compounding. In the case of composites with smaller initial fiber length, basalt fibers predominantly served as nucleating agents for polypropylene thereby resulting in an increase in the degree of crystallinity. The addition of polypropylene‐g‐maleic anhydride (PP‐g‐MA) caused the matrix to become amorphous, which was due to the establishment of a fiber–matrix interphase. This behavior was different for the composites with relatively larger initial fiber length especially at higher fiber content. The reduction in fiber length in the composites caused a decrease in crystallinity, as this hindered the ability of the polypropylene matrix to form crystals. Addition of PP‐g‐MA established a fiber–matrix interphase thereby synergistically contributing to the increased matrix amorphousness of the basalt fiber reinforced polypropylene composites with 6.4 mm initial fiber length. Reduced fiber length due to processing also accelerated the thermal degradation of the composites with an initial fiber length of 6.4 mm. However, the reduction in fiber length due to processing resulted in increased fiber orientation, which contributed to the improvement in tensile and flexural properties of the basalt fiber reinforced polypropylene composites with an initial fiber length of 6.4 mm. At 30% fiber content, the tensile strength and modulus of basalt fiber reinforced matrix modified polypropylene composites with 6.4 mm initial fiber length improved by 18% and 13% as compared with the composites with 3.2 mm initial fiber length.

Tensile and compressive properties of bamboo scrimber under different temperature conditions

AbstractBamboo scrimber demonstrates vulnerability to environmental temperature fluctuations, such as exposure to cold or fire, when deployed in structural applications. Consequently, its mechanical properties can substantially diverge from the intended design values under varying thermal conditions. This study aims to study the tensile and compressive properties of bamboo scrimber under different temperatures to provide data support for studying bamboo scrimber under low and high temperatures. The compressive properties of bamboo scrimber under temperatures ranging from −30°C to 250°C and the tensile properties under −20°C to 250°C were determined by a series of tests with a total of 125 specimens. The results show that the mass loss of bamboo scrimber increases gradually with the increase in temperature, and the increasing trend intensifies after 120°C. With the increase of temperature, the failure mode of the specimens under compression changes from the bottom compression cracking damage to the local destabilization of longitudinal fibers, while the tensile damage modes aren't influenced by temperature, and both “straight‐line” and “folded‐line” types of damage modes occur at different temperatures. The tensile and compressive strengths and elastic modulus of the specimens decreased with the increase in temperature, and the strength was more susceptible to the temperature than the elastic modulus: a rise in temperature from 20°C to 250°C resulted in a reduction of compressive strength and tensile strength by 80.80% and 84.11%, respectively, the compressive modulus and tensile modulus experienced decreases of 49.51% and 53.28%. Furthermore, equations of temperature influence coefficients of strength and elastic modulus were established based on the test results.Highlights Bamboo scrimber's mechanical properties under different temperatures are studied. Tendency and explanation of temperature influence coefficients are analyzed. Temperature coefficient equations for strength and elastic modulus are proposed.