Coconut Research Articles

The Effect of Adding Coconut Dregs (Cocos nucifera L.) on “Wajik” Characteristics

This study aims to determine the effect of adding coconut dregs on the characteristics of wajik based on organoleptic and chemical tests. The research design used was a Completely Randomized Design (CRD) with 5 treatments, namely A (without adding coconut dregs), B (addition of 1% coconut dregs), C (addition of 2% coconut dregs), D (addition of 3% coconut dregs), and E (addition of 4% coconut dregs) with 3 replications. The research data were statistically analyzed using Analysis of Variance (ANOVA) and continued with Duncan's New Multiple Range Test (DNMRT) analysis at the 5% level. The results showed that adding coconut dregs had a significant effect on, fat content, crude fiber, sucrose, total energy, and organoleptic including color, aroma, taste, and texture. However, it had no significant effect on ash content. The best treatment was wajik with the addition of 3% coconut dregs, with ash content of 0.78%, fat content of 14.31%, protein content of 2.58%, crude fiber of 6.42%, total energy of 329.51 kcal, and a liking level for color 3.80 (like), aroma 3.84 (like), taste 3.60 (like), and texture 3.80 (like).

Efficiency of Ceramic Composite Filter Produced Using Nano Particulate Carbonaceous Material

Millions of people have no access to safe water. This has led to continued incidence of waterborne diseases with severe cases of complications and sometimes death. Attempts to use silica sand-based materials for the production of filters by researchers are still evolving. In this study a novel hybrid clay-nanoparticulate agro-waste blend water filter with appropriate pore size and flow rate for contaminant-free water filtration was produced. The composite filters were produced using hydraulic pressing and sintering process. Four different ratios of clay, activated carbon and nanoparticle coconut shell (60:30:10, 60:20:20, 60:10:30, and 60:0:40 wt %) were mixed and fired at 700 °C, 750 °C, 800 °C, 850°C, 900 °C, 950 °C, and 1000 °C respectively at the rate of 75 °C/hr. E. Coli, Total Coliform, and turbidity tests were carried out on the influent water collected from Lagos Lagoon, and effluent water samples were filtered using the produced samples. The result of water tests revealed that all the filters produced removed between 86.81 % to 99% Escherichia Coliform (E. coli), and 81.81% to 93.31%% total coliform in the water sample. The blend of 60:10:30 fired at 850 °C and 900 °C showed improved properties with a flow rate value of 2.83 l/hr and 2.77 l/hr. In conclusion, the study established that synthesis of nanoparticle coconut shell and activated carbon is a suitable material for producing clay composite filters that can purify water to Nigerian Standards for Drinking Water Quality (NSDWQ) acceptable level.

Administration of Young Coconut (Cocos nucifera L.) Juice Ameliorates Memory Impairment in a Menopausal Rat Model.

In Southeast Asia, the traditional use of young coconut (Cocos nucifera L.) juice (YCJ) by women to alleviate postmenopausal symptoms suggests potential estrogenic properties. However, few studies explore the impact of YCJ on pathologies associated with estrogen deficiency in postmenopausal animal models. This study examines the impact of YCJ supplementation on memory impairment and depression-like behavior in ovariectomized (Ovx) rats. Ten-week-old female rats underwent either a sham operation (Sham) or bilateral Ovx. The rats in the Ovx + YCJ group received 5×-concentrated YCJ by gavage at a dose of 15 mL/kg body weight. Twelve weeks later, the Morris water maze and forced swim tests were used to evaluate hippocampus-dependent spatial memory and depression-like behavior, respectively. The Ovx rats displayed significant memory impairment (p < 0.05) and depression-like behaviors (p < 0.05), while the memory performance in the rats in the Ovx + YCJ group resembled that of the Sham rats. However, the administration of YCJ did not result in the improvement of depression-like behavior. These findings suggest that YCJ consumption may help ameliorate memory impairment in postmenopausal women.

THERMAL TREATMENT OF AGRICULTURAL WASTE AS AN ALTERNATIVE FOR PRODUCING SOLID BIOFUELS

Brazil stands out in terms of the composition of its energy matrix, with biofuels playing an important role, with many different raw materials requiring study. This article seeks to evaluate thermal treatment's effect on different biomass species to improve their energy characteristics, through an analysis of immediate chemical composition (as standardized by the American Society for Testing and Materials), spectroscopy in the infrared region, and thermogravimetry. This paper details the energy potential for each biomass, establishing the torrefaction processes with the best yield from agricultural residue of peanuts (Arachis hypogaea L.), cacao (Theobroma cacao L.), sugarcane (Saccharum spp.), coconut (Cocos nucifera L.), palm oil (Elaeis guineensis Jacq.), and papaya (Carica papaya L.). The thermal treatment of biomass proved effective in obtaining a solid biofuel with a higher heating value, as diagnosed through immediate chemical analyses.

Sensitization and allergy to pineapple and coconut juice in patients followed up for allergic diseases in Parakou, Benin

Objectives: Little is known about adverse food reactions. The aim of this study was to investigate the sensitization and allergy to two tropical fruits, pineapple (Ananas comosus) and coconut (Cocos nucifera), among patients followed up for allergic disease in Borgou Teaching Hospital in Parakou, Benin. Materials and Methods: A prospective cross-sectional study was conducted in 2021. Adult patients (≥18 years) who were followed up for allergic asthma, rhinitis, or conjunctivitis were included in the study. Information on clinical manifestations following pineapple juice or coconut water drinking was collected, and skin prick testing was carried out. Results: Overall, 101 patients were enrolled, male-female ratio of 0.4:1 and mean age of 33.4 (±14.4) years. Clinical manifestations were triggered by pineapple in 53.5%, mainly mouth and lip pruritus (38.6%). The prevalence of sensitization was 36.6%. Allergy was diagnosed in 24.8% (or 46.3% of those who complained) and was associated with mouth and lip pruritus (odds ratio [OR] = 4.1; 95% confidence interval [CI] = 1.6–10.6; P = 0.003), bronchospasm (OR = 3.7;95%CI = 1.1–12.7; P = 0.031), allergic rhinitis (OR = 3.5; 95%CI = 1.2–10.4; P = 0.020), and conjunctivitis (OR = 4.4; 95%CI = 1.6–12.5; P = 0.007). Clinical manifestations after ingestion of coconut water reportedly occurred in 18.8% and were mostly bronchospasm (8.9%). The prevalence of sensitization was 20.8%. Allergies were diagnosed in 6.9% (or 33.3% of those who complained), with no association found with demographic or clinical characteristics. Conclusion: Pineapple is a common cause of food allergy among patients who are followed up in Borgou Teaching Hospital, while coconut is less responsible for this disorder. More studies are required to improve knowledge of allergic diseases in Sub-Saharan Africa, which is facing an epidemiological transition.

Development and Evaluation of Sulfate-Free Charcoal Toothpaste from Coconut Shell and Rice husk

Development and Evaluation of Sulfate-Free Charcoal Toothpaste from Coconut Shell and Rice husk

Dynamics of flavonoid metabolites in coconut water based on metabolomics perspective.

Coconut meat and coconut water have garnered significant attention for their richness in healthful flavonoids. However, the dynamics of flavonoid metabolites in coconut water during different developmental stages remain poorly understood. This study employed the metabolomics approach using liquid chromatography-tandem mass spectrometry (LC-MS/MS) to investigate the changes in flavonoid metabolite profiles in coconut water from two varieties, 'Wenye No.5'(W5) and Hainan local coconut (CK), across six developmental stages. The results showed that a total of 123 flavonoid metabolites including chalcones, dihydroflavonoids, dihydroflavonols, flavonoids, flavonols, flavonoid carboglycosides, and flavanols were identified in the coconut water as compared to the control. The total flavonoid content in both types of coconut water exhibited a decreasing trend with developmental progression, but the total flavonoid content in CK was significantly higher than that in W5. The number of flavonoid metabolites that differed significantly between the W5 and CK groups at different developmental stages were 74, 74, 60, 92, 40 and 54, respectively. KEGG pathway analysis revealed 38 differential metabolites involved in key pathways for flavonoid biosynthesis and secondary metabolite biosynthesis. This study provides new insights into the dynamics of flavonoid metabolites in coconut water and highlights the potential for selecting and breeding high-quality coconuts with enhanced flavonoid content. The findings have implications for the development of coconut-based products with improved nutritional and functional properties.

Kinetic modeling and optimization of triclosan adsorption onto coconut shell activated carbon

This study investigates the efficacy of activated carbon derived from coconut shells for the removal of Triclosan (TCS) from aqueous solutions. Experimental results demonstrate the impressive efficiency of coconut shell-derived activated carbon in eliminating TCS from water. Statistical analysis underscores the significant role of agitation in enhancing adsorption efficiency, with increased agitation leading to higher contaminant removal rates. Equilibrium is rapidly achieved, with removal efficiencies exceeding 85 %. Kinetic analysis reveals rapid adsorption kinetics, predominantly following the pseudo-second-order model. Additionally, intraparticle diffusion analyses provide insights into TCS diffusion within activated carbon pores, highlighting its dependence on solute concentration. These findings underscore the potential of coconut shell-derived activated carbon as a viable solution for mitigating TCS contamination in water sources, contributing to the development of effective water treatment strategies.

A biochar-based amendment improved cadmium (Cd) immobilization, reduced its bioaccumulation, and increased rice yield

Cadmium (Cd) contamination of soil threatens human health, food security, and ecosystem sustainability. The in situ stabilization of Cd has been recognized as a potentially economical technology for the remediation of Cd-contaminated soil. Recently, biochar (BC) and activated carbon (AC) have received widespread attention as eco-friendly soil amendments that are more beneficial for plant growth, soil health, and remediation of contaminated soil. An experiment was performed in a paddy field to investigate the effects of two different types of BC (maize straw biochar and bamboo biochar) and AC (coconut shell activated carbon) in combination with rape organic fertilizer (R), calcium magnesium phosphate fertilizer (P), and fulvic acid (F), respectively, on soil Cd immobilization, Cd accumulation in rice, and yield. The results indicated that the BC/AC-based amendments reduced soil bioavailable Cd (DTPA-Cd) and brown rice Cd by 9.58%–27.06% and 19.30%–71.77%, respectively. The transformation of exchangeable Cd (Ex-Cd) to carbonate-bound Cd (Ca-Cd), Fe-Mn oxide bond (Ox-Cd), and residual (Re-Cd) in soil accounted for the mitigation of Cd uptake and enrichment by rice. Additionally, BC-/AC-based amendments altered soil physicochemical properties, which significantly increased the soil pH and cation exchange capacity (CEC), total nitrogen (TN), total phosphorus (TP), soil organic carbon (SOC), and dissolved organic carbon (DOC), directly promoting soil health. All BC-/AC-based amendments significantly increased FeIMP and MnIMP concentrations by 47.31%–160.34% and 25.72%–73.09% in the Fe/Mn plaque (IMP), respectively. Maize straw and bamboo biochar-based amendments significantly increased rice yield by 10.46%–20.41% and 9.94%–16.17%, respectively, while coconut shell-activated carbon severely reduced rice yield by 65.06%–77.14%. The correlation analysis revealed that leaf Cd and IMP primarily controlled Cd uptake by rice, and soil pH, Eh, CEC, SOC, IMP, and TP influenced DTPA-Cd in soil. This field study demonstrated that maize straw and bamboo biochar-based amendments not only reduced soil DTPA-Cd in paddy fields but also decreased the accumulation of Cd in brown rice, as well as improved rice yield, which has potential application in Cd-contaminated agriculture fields. Coconut shell-activated carbon severely decreased rice yields, which is not appropriate for rice production.

Drilling liquid from plant based oil using carbon based nanoparticles

The risks of disposal associated with using mineral-based drilling liquids have prompted the search for alternatives. Despite their long-standing use in the industry, mineral-based liquids pose challenges due to their eco-toxicity, poor biodegradability, and low fire resistance. Recently, vegetable-based liquids have gained attention for their excellent environmental friendliness and high fire resistance. In this study, a green drilling liquid was developed from non-food grade vegetable oil. The base liquid was extracted and the oil underwent epoxidation to enhance the thermal stability. Two different carbon-based nanoparticles were synthesized from coconut shells and graphite. The graphene nanoparticles derived from graphite exhibited a higher surface area compared to those from coconut shells. The properties of the developed graphene nanomud, such as gel strength, thermal conductivity, specific gravity, mud viscosity, mud filtrate properties, cutting carrying index, electrical conductivity, and toxicity, were investigated and compared with diesel-based nanomud. Results showed that neem graphene nanomuds possess properties that are comparable to, and in some cases better than diesel-based oil mud. The addition of 0.25 wt% to 2.0 wt% of graphene nanoparticles increased the electrical conductivity of the fluid from 58.7 to 229.5 µS/cm at 25 °C, enabling the use of resistivity imaging techniques for wellhole geological studies. Additionally, the nanofluids demonstrated desirable thermal conductivity, ranging from 0.138 W/m·K to 0.267 W/m·K at 25 °C, making them suitable coolants. Furthermore, toxicity tests using bean plants demonstrated that graphene-based nanomuds are environmentally friendly and could offer a cleaner, more sustainable option for drilling operations.

Design of Biomaterial Absorber using coconut shell charcoal for 38 GHz frequency

Abstract Activated carbon derived from coconut shells has gained significant attention as an effective and sustainable absorber material. The process involves carbonizing coconut shells to create a carbon-rich base, followed by activation through heat and steam, leading to a porous structure with a vast surface area. In this research, coconut shell charcoal is used to make an absorber for microwave application. We used relative permittivity (ε) 3.178, relative permeability, (µ) 1.215 and dielectric loss tangent (σ) 0.0719 to simulate the material based of coconut shell charcoal. We investigate the absorption in terms of design and the size of the proposed absorber in the frequency region of 26.5 GHz to 40 GHz (Ka band). The optimal absorption was achieved with a transmission factor of -29.22 dB and -52.94 dB in both simulation and measurement. The absorption percentage &gt; 99 % for the flat design of the coconut shell charcoal design with the thickness of 16.9 mm.

Design and experiment of coconut picking robot with climbing

Due to the height of coconut trees and the high risks associated with manual picking, there is a severe shortage of labor in the coconut picking industry in Hainan. To address this issue, a coconut picking robot was designed and constructed. In this study, the robot was mainly composed of tree climber and 3 degree of freedom (DoF) manipulator. The robot integrated two functions of tree climbing and coconut picking. The 3D model of the picking robot was designed through SOLIDWORKS. Furthermore, the statics and dynamics simulation of the robot were implemented through ANSYS and ADAMS. With STM32 as the core, an embedded remote control system based on CAN bus communication protocol was developed. And a multi-channel remote controller handle was used to control the robot to realize tree climbing and coconut picking. According to the test results, the robot could successfully climb trees up to 13.42 m tall. The average climbing time of coconut picking robot on 10 coconut trees was 152.3 s, and the average picking time was 222.1 s. Specifically, for coconut trees with height ranging from 7.03 m to 11.5 m, inclination ranging from 78° to 90° and diameter ranging from 21.08 cm to 30.20 cm, the average climbing time of the coconut picking robot was 147.7 s. The average climbing time for the remaining trees was 162.9 s. For the above types of trees, the robot could climb to the top of the trees more quickly, demonstrating better climbing performance. This study provides technical support for mechanized coconut picking and will inspire the development of coconut picking robots.

Synthesis and Characterization of Nano Iron Oxide Biochar Composite for Efficient Removal of Crystal Violet from Water

In the present study, Coconut Husk Biochar (CHB) was synthesise from widely available, locally sourced agro waste, coconut husk and characterized using different techniques like scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) analysis, Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). CHB was tested for its ability to adsorb crystal violet (CV), a commonly used cationic dye, from water. It was capable of adsorbing more than 98% of CV from water and follows Freundlich isotherm model with pseudo second order kinetics though the overall process was unfavourable. Moreover, separation of CHB from water after adsorption is a cumbersome process. Thus, unmodified CHB is not suitable for use as an adsorbent for CV. Magnetic nano iron oxide Biochar Composite (MBC) was synthesized by deposition of nano iron oxide (Fe3O4) onto its surface by co-precipitation method and characterized using SEM, XRD and FTIR. SEM analysis provided visual evidence of this deposition which was further confirmed by XRD and FTIR analysis. MBC was also effective in adsorbing more than 90% of CV from aqueous solution though a decrease in adsorption capacity was observed. Adsorption data followed Langmuir isotherm model and pseudo second order kinetics. MBC is superparamagnetic and is strongly attracted to a small bar magnet, facilitating easy removal from water after CV adsorption.

Adsorption Behavior of Methylene Blue Onto Activated Coconut Shells: Kinetic, Thermodynamic, Mechanism and Regeneration of the Adsorbent.

Adsorption techniques are widely used to remove some classes of pollutants from waters, especially those which are not easily biodegradable. The removal of Methylene blue (MB), as a pollutant, from waste waters of textile, paper, printing and other industries has been addressed by the researchers. The aim of this study is to eliminate MB by Activated Coconut Shells (ACS) produced at low cost by adsorption in batch mode. The ACS was characterized by the FTIR spectroscopy and point of zero charge (pHpzc: 5.06). Some examined factors were found to have significant impacts on the MB uptake of ACS like the initial dye concentration Co (40-120mg/L), solution pH (2-8), ACS dose (1-12g/L), agitation speed (50-500 r/min), particles size (1.0-1.2mm) and temperature (298-333K). The best capacity was found at pH 6 with an adsorbent dose 8g/L, an agitation speed 200 r/min and a contact time of 60 min. Modeling Kinetics and Isotherms shows that the pseudo-second-order kinetic model with R 2 (0.935 -0.998) and Langmuir adsorption isotherm model provide better fitness to the experimental data with the maximum adsorption capacity of 30.30mg/g at 25°C. The separation factor RL (0.933-0.541) in the concentration range studied (10-120mg/L) shows a favorable adsorption. The isotherms at different temperatures have been used for the determination of the free energy ΔG° (198-9.72kJ/mol); enthalpy ΔH° (82.082kJ/mol) and entropy ΔSo (245.689J/K mol) to predict the nature of MB adsorption process. The positive values of (ΔGo) and (ΔHo) indicate a non-spontaneous and endothermic MB adsorption with a chemisorption. The adsorbent elaborated from Coconut Shells was found to efficient and suitable for the removal of MB dye from aqueous solutions, due to its availability, low cost preparation and good uptake capacity.

Synthesis and performance evaluation of bio-derived and synthetic carbon as lithium-sulfur battery cathode

The next-generation of batteries need be both energy dense and environment friendly. Lithium sulfur batteries (LSBs) satisfy both criteria but their practical implementation is marred by the highly resistive nature of sulfur. Carbon-based cathodes play a vital role in mitigating the issue because their high conductivity allows for effective electron transfer during electrochemical cycling. Synthesis and electrochemical evaluation of carbon-based cathodes from two different sources for LSBs was carried out. Herein, two kinds of carbon, namely bio-derived carbon from coconut shells (CC500) and N-doped carbon (NC) from polyacrylonitrile fibers were synthesized and sulfur was incorporated via the melt diffusion route. The composites are characterized by PXRD and TGA, which determined 80 wt% mass loading of sulfur. The higher intensity of G-band over D-band in Raman spectroscopy indicates greater graphitic character for CC500 compared to NC. SEM images show large macro-pore like tunnels in CC500 while NC appears are irregular chunks. EDAX spectra showed 20 wt% N content in NC while CC500 is largely carbon with some minor surface oxygen. In galvanostatic charge–discharge cycling of coin cells, bare CC500/S shows better specific capacity compared to NC/S samples but the trend flips once a separator modified with 4 mg of graphene oxide (GO) is introduced (indicated as NC/S/GO4 and CC500/S/GO4). This points towards synergy between N-doped carbon and GO layer in retaining the soluble polysulfides in the catholyte region. NC/S/GO4 exhibited better capacity i.e., 1453, 1024, 866, 787, 697 mAh/g versus 1016, 779, 672, 551, 441 mAh/g offered by CC500/S/GO4 when discharged at 50, 100, 200, 300 and 500 mA/g, respectively.

Unveiling the apoptotic potential of antioxidant-rich Bangladeshi medicinal plant extractives and computational modeling to identify antitumor compounds

Nowadays, there has been a significant surge in the exploration of anticancer compounds derived from medicinal plants due to their perceived safety and efficacy. Therefore, our objective was to investigate the antioxidant and antiproliferative properties, along with the phytoconstituents, of methanol extracts from various parts of 15 selected Bangladeshi medicinal plants. Standard spectrophotometric methods and confocal microscopy were utilized to assess the antioxidant and antiproliferative potential of these extracts. Additionally, phytochemical profiling was executed through gas chromatography-mass spectrometry (GC-MS) analysis. Among the extractives, Bombax ceiba bark exhibited the highest scavenging capacity against DPPH (IC50: 10.3 ± 0.7 μg/mL) and hydroxyl (IC50: 3.9 ± 0.1 μg/mL) free radicals. Furthermore, the total antioxidants, reducing power, and polyphenols of B. ceiba bark were higher than those of other extracts. B. ceiba bark also showed significant antiproliferative capacity against MCF-7 cells (86.67 %) in the MTT assay, followed by Cocos nucifera roots (83.92 %), Bixa orellana leaves (44.09 %), and Leea macrophylla roots (25 %). Moreover, B. ceiba bark, L. macrophylla roots, C. nucifera roots, and B. orellana leaves-treated Ehrlich ascites carcinoma (EAC) cells demonstrated growth inhibition rates of 87.27 %, 80.45 %, 42.9 %, and 37.27 %, respectively. Fluorescence microscopic analysis of EAC cells treated with these extracts revealed apoptotic features such as condensed chromatin, cell shrinkage, nucleus fragmentation, and membrane blebbing compared to untreated EAC cells. The GC-MS analysis of B. ceiba bark identified 18 compounds, including various alcohols, alkenes, and esters. Additionally, a molecular docking study revealed oxalic acid, cyclohexyl dodecyl ester as the most potent compound (−6.5) active against breast cancer. In summary, our results demonstrate that B. ceiba bark possesses robust antioxidant and antiproliferative properties, along with potent antitumor compounds, which could be utilized in the treatment of carcinoma.

Impact of coconut husk biochar on soil physical and biological properties, growth characters and yield of banana

Impact of coconut husk biochar on soil physical and biological properties, growth characters and yield of banana

In vitro cluster buds regeneration and control of shoot tip necrosis in tissue cultures of Trichosanthes cucumerina L.

Trichosanthes cucumerina L. is a medicinal vine with great potential that can be used as a vegetable. In this study, an efficient in vitro regeneration system of T. cucumerina was established by inducing adventitious buds and controlling Shoot Tip Necrosis (STN) in the in vitro culture. The results of hormone single factor and orthogonal experiments showed that 6-BA had a significant effect on inducing adventitious buds. The best medium for bud proliferation was MS + 6-BA 3.0 mg·L− 1 + KIN 2.0 mg·L− 1 + NAA 0.5 mg·L− 1, and the proliferation capacity was 14.68. However, after three consecutive subcultures, a higher incidence of STN (78.86%) was observed. The results of the STN control experiment showed that reducing the concentration of inorganic salt, shortening the subculture interval, and increasing the Ca2+ in the medium could effectively control the occurrence of STN. However, reducing the concentration of inorganic salt and shortening the subculture interval excessively reduces the proliferation capacity significantly. Considering both the incidence of STN and proliferation capacity, the measures proposed in this study to alleviate STN were to keep the concentration of inorganic salt unchanged, adjust the subculture interval from 45 days to 40 days, and increase the Ca2+ concentration in the medium to 480 mg·L− 1. When the subculture interval was 40 d, the stem segments obtained the lowest STN incidence (8.3%) and higher shoot proliferation capacity (10.02) on the medium of MS + 3.0 mg·L− 1 6-BA + 2.0 mg·L− 1 KIN + 0.5 mg·L− 1 NAA + 360.36 mg·L− 1 Ca2+ (360 mg·L− 1 is the concentration of additional calcium to be added, and after this addition, the total calcium concentration in the MS medium was 480.48 mg·L− 1). The best rooting medium for stem segments was MS + 0.50 mg·L− 1 NAA; the rooting rate was 100%, and no STN occurred. After acclimation, the survival rate of the rooted plantlet reached 95% after 40 days in the soil matrix of coconut husk: humus soil: perlite = 2: 2: 1 (v/v). The results of this study not only reveal the mechanism of STN in T. cucumerina, but also provide technical support and a theoretical basis for its further breeding and cultivation.

Effect of biochar on soil chemical properties of tidal wetland in Jambi, Indonesia, and growth and yield of various rice varieties

The study aimed to determine the effect of biochar on the growth and yield of several rice varieties in a tidal wetland agroecosystem. This research used a split-plot design with the main plot was biochar application, consisting of three levels (no biochar, rice husk biochar, and coconut shell biochar), and the subplot was rice variety consisting of ten varieties (Inpara, Inpari 30, Kuning, Karya Rendah, Bujang Pelawah, Pandan Wangi, Bujang Berinai, Kwatek Tinggi, Candu, and Serai). Plant parameters observed were plant height, number of tillers, productive tillers, panicle length, number of grains per panicle, number of empty grains per panicle, milled rice weight, and weight of 1,000 grains. Results of this study showed that the application of biochar improved soil fertility by increasing organic carbon, available phosphorus and potassium, cation exchange capacity, and reducing the soluble iron in the soil. However, the application of biochar did not significantly affect the height of rice plants. The application of coconut shell biochar yielded the best results in increasing the number of productive tillers, the number of grains per panicle, grain dry weight, and reducing the number of empty grains per panicle.

Pengaruh variasi besar butir dan variasi komposisi bahan terhadap kinerja briket arang tempurung kelapa dan sekam padi

Abundant biomass waste is often thrown away. Careless disposal of waste will have a negative impact on environmental quality. Research regarding variations in composition and grain size of biomass waste charcoal briquettes on briquette performance is feasible. The aim of the research is to obtain briquettes that have high performance. The research method used was experimental research, coconut shell charcoal and rice husk charcoal, made in sizes 20 mesh, 60 mesh and 100 mesh. Then mixed with 15% starch adhesive with variations in the composition of coconut shell charcoal (TK): rice husk charcoal (SP), namely: I (75%:25%), II (50%:50%) and III (25%:75% ), After printing, the biket is dried in the sun and in the oven until it reaches a moisture content of (14-15)%. After the briquettes are dry, the heating value, flame duration and water boiling time are tested. In the calorific value test, the greater the composition (TK), the greater the calorific value produced. The highest heating value of 5937 kcal/kg was obtained from composition I, mesh 60 and the lowest heating value of 3714 kcal/kg was obtained from composition III mesh 60. The shortest flame duration of 1386.6 seconds occurred in mesh 20 composition III and the longest flame duration was 1933.2 seconds. obtained on mesh 100 composition I. In the Boilling Time test, it was found that the larger the grain size and the greater the composition of the coconut shell charcoal mixture in bioarang briquettes, the faster the water boiling time.