Temperature Stress Research Articles

Evaluation of Foxtail Millet Varieties for Thermotolerance at Seedling Stage using Temperature Induction Response Technique (TIR)

In the present scenario of climate change, Foxtail millet is the best crop of choice and an indispensable component of dryland farming due to its C4 plant type and tolerance against the abiotic stresses. However, all the foxtail millet varieties may not sustain under severe temperature stress particularly at germination and seedling growth stages. Therefore, screening of varieties is required to identify the stress tolerant varieties in foxtail millet which can combat temperature stress at seed germination and early seedling growth stages which is the need of the hour under ever changing climatic conditions. Hence, A lab experiment was conducted to standardize the temperature induction response (TIR) protocol for foxtail millet seedlings using WGC-450 programmable plant growth chamber. Temperatures were standardized as sub lethal i.e. challenging temperatures as 38°C – 54°C for 5 hours and lethal temperatures as 56°C for 3 hours. Seven foxtail millet varieties (Suryanandi, SiA 3156, Srilakshmi, SiA 3085, Narasimharaya, Krishnadevaraya and Prasad) were screened for intrinsic tolerance using the standardized Thermo Induced Response (TIR) protocol. Out of the seven varieties evaluated, SiA 3085, Prasad, Suryanandi, Srilakshmi were identified to possess high level of thermo tolerance in terms of higher seedling survival with less reduction in root and shoot growth. The varieties with intrinsic heat tolerance can be explored for the development of heat stress tolerant varieties.

Competing effects of temperature and mechanical stress on polar vortex transition in oxide superlattices

Competing effects of temperature and mechanical stress on polar vortex transition in oxide superlattices

Influence of micro-milling machining parameters on residual stresses in alumina bioceramics-a three-dimensional finite element simulation study.

The formation and distribution of residual stress during the micro-milling process significantly affect the crack resistance and service life of alumina bioceramics. This study aims to optimize the surface residual stress distribution by adjusting machining parameters, thereby improving the machining quality of alumina ceramics. A three-dimensional finite element model of alumina bioceramics was developed, and numerical simulations were conducted to analyze the effects of feed per tooth, cutting depth, and spindle speed on temperature and residual stress. The study further explores the patterns of residual stress variation. The results show that both surface temperature and residual tensile stress exhibit systematic trends with parameter changes. Specifically, surface residual tensile stress increases with cutting depth initially but decreases sharply once the cutting depth exceeds 25 μm. Residual tensile stress increases with spindle speed, reaching its peak at 21,000 r/min before stabilizing. Additionally, the residual tensile stress rises with feed per tooth at first but gradually declines when the value exceeds 25 μm/z. This research reveals the mechanisms by which micro-milling parameters influence surface temperature and residual stress in alumina bioceramics, providing theoretical guidance for optimizing micro-milling processes. The findings can also be extended to the micro-milling of other hard-to-machine materials, offering broad engineering application potential.

Transcriptome Analysis Reveals the Crucial Role of Phenylalanine Ammonia-Lyase in Low Temperature Response in Ammopiptanthus mongolicus

Background: Ammopiptanthus mongolicus is a rare temperate evergreen shrub with high tolerance to low temperature, and understanding the related gene expression regulatory network can help advance research on the mechanisms of plant tolerance to abiotic stress. Methods: Here, time-course transcriptome analysis was applied to investigate the gene expression network in A. mongolicus under low temperature stress. Results: A total of 12,606 differentially expressed genes (DEGs) were identified at four time-points during low temperature stress treatment, and multiple pathways, such as plant hormones, secondary metabolism, and cell membranes, were significantly enriched in the DEGs. Trend analysis found that the expression level of genes in cluster 19 continued to upregulate under low temperatures, and the genes in cluster 19 were significantly enriched in plant hormone signaling and secondary metabolic pathways. Based on the transcriptome data, the expression profiles of the genes in abscisic acid, salicylic acid, and flavonoid metabolic pathways were analyzed. It was found that biosynthesis of abscisic acid and flavonoids may play crucial roles in the response to low temperature stress. Furthermore, members of the phenylalanine ammonia-lyase (PAL) family in A. mongolicus were systematically identified and their structures and evolution were characterized. Analysis of cis-acting elements showed that the PAL genes in A. mongolicus were closely related to abiotic stress response. Expression pattern analysis showed that PAL genes responded to various environmental stresses, such as low temperature, supporting their involvement in the low temperature response in A. mongolicus. Conclusions: Our study provides important data for understanding the mechanisms of tolerance to low temperatures in A. mongolicus.

Family Identification and Functional Study of Copper Transporter Genes in Pleurotus ostreatus

The copper transport (COPT/Ctr) family plays an important role in maintaining metal homeostasis in organisms, and many species rely on Ctrs to achieve transmembrane transport via copper (Cu) uptake. At present, the Ctr family is widely studied in plants. However, there are few reports on the use of Ctrs in edible mushrooms. In this study, the Pleurotus ostreatus CCMSSC00389 strain was used as the research object, and the addition of exogenous copper ions (Cu2+) increased the temperature tolerance of mycelia, maintained the integrity of cell membranes, and increased mycelial density. In addition, four PoCtr genes were further identified and subjected to bioinformatics analysis. Further research revealed that there were differences in the expression patterns of the PoCtr genes under different temperature stresses. In addition, the biological function of PoCtr4 was further explored by constructing transformed strains. The results showed that OE-PoCtr4 enhanced the tolerance of mycelia to heat stress and H2O2. After applying heat stress (40 °C), OE-PoCtr4 promoted the recovery of mycelia. Under mild stress (32 °C), OE-PoCtr4 promoted mycelial growth, maintained cell membrane integrity, and reduced the degree of cell membrane damage caused by heat stress. It is speculated that OE-PoCtr4 may maintain the integrity of the cell membrane and enhance the heat resistance of mycelia by regulating the homeostasis of Cu2+.

Mitigating excessive heat in Arabica coffee using nanosilicon and seaweed extract to enhance element homeostasis and photosynthetic recovery.

Global warming-related temperature increases have a substantial effect on plant and human health. The Arabica coffee plant is susceptible to growing in many places across the world where temperatures are rising. This study examines how nanosilicon and seaweed extracts can improve Arabica coffee plant resilience during heat stress treatment (49.0 ± 0.3°C) by maintaining mineral homeostasis and photosynthetic ability upon recovery. The principal component analysis arrangement of four treatments, nanosilicon (Si), seaweed extract (SWE), Si + SWE, and control (CT), showed each element ratio of magnesium, phosphorus, chloride, potassium, manganese, iron, copper, and zinc per silicon in ambient temperature and heat stress that found influenced upper shoot rather than basal shoot and root within 74.4% of largest feasible variance as first principal component. Magnesium and iron were clustered within the silicon group, with magnesium dominating and leading to a significant increase (p ≤ 0.05) in magnesium-to-silicon ratio in the upper shoot under heat conditions, especially in Si and Si + SWE treated plants (1.11 and 1.29 fold over SWE treated plant, respectively). The SWE and Si + SWE treated plants preserved chlorophyll content (15.01% and 28.67% over Si-treated plant, respectively) under heat stress, while the Si and Si + SWE treated plants restored photosynthetic efficiency (Fv/Fm) better than the SWE treated plant. The concomitant of the Si + SWE treatment synergistically protected photosynthetic pigments and Fv/Fm by adjusting the magnesium-silicon homeostasis perspective in Arabica coffee to protect real-world agricultural practices and coffee cultivation under climate change scenarios.

Heat Shock Proteins expression in malaria and dengue vector.

The survival of mosquitoes under changing climatic conditions particularly temperature, is known to be supported by Heat Shock Proteins (HSPs). In view of climate change, it is imperative to know whether the mosquito vectors will be able to withstand the increased temperatures or perish. Therefore, the present study was undertaken on the expression of HSPs' gene in An. stephensi and Ae. aegypti by exposing them to temperatures ranging from 5 to 45°C for 15-180-minutes for once and continuously or with rest in between. We compared the temperature-tolerance of both the vectors in terms of expression of HSP83, HSP70, and HSP26 genes at varying degrees of temperature and duration. HSP70 and HSP26 were found distinctively expressed in both the vectors as compared to HSP83. With continuous exposure up to 180-minutes at 35°C and 40°C, HSP70 was found upregulated up to 35 and 47 folds in Ae. aegypti while in An. stephensi, the expression was only 1 fold. Between the genes, HSP70 was highly expressed at different temperatures followed by HSP26 and HSP83. The manifold up-regulation of HSP genes in Ae. aegypti than An. stephensi may be attributed to the robustness of Aedes vector in terms of temperature tolerance. This study has shown that Ae. aegypti and An. stephensi can withstand considerable temperature stress by expressing HSPs when exposed to variable temperature and duration. In view of changing climate, the study provides a clue that the vector of dengue and zika virus will be difficult to control.

Strain‐Controlled Low‐Cycle Fatigue Behavior of a Superalloy Considering Extensive Temperature Range and Stress Concentration

ABSTRACTThis study aims to investigate the low cycle fatigue (LCF) behavior and fatigue life prediction method of an advanced solid solution–strengthened nickel‐based superalloy at various temperatures and stress concentrations. Cylindrical specimens as well as plates with three types of holes (including straight holes and inclined holes with different orientations) were designed and machined for fatigue tests. The test results revealed fatigue life decreases with the temperature increasing. Meanwhile, the fatigue lives of the plate specimens have decreased differently and are strongly dependent on the geometry and orientation of the holes. The key damage parameter related to the fatigue life was found on the strain gradient path. A criterion based on strain gradient is defined as the boundary of the damage process zone. The results show that the prediction was in good agreement with the experimental data, for the majority of the data are within a scatter band of ±2.

Transcriptome and Metabolome Analysis Reveals the Effect of Temperature on the Vegetative Mycelium of Morchella sextelata

Morchella, a highly valued medicinal and edible mushrooms, is experiencing an increasing demand; however, its cultivation is significantly influenced by climatic conditions and soil characteristics. Consequently, elucidating the mechanisms underlying Morchella mycelium’s response to temperature stress holds substantial importance for enhancing Morchella cultivation practices. In this study, we used Morchella sextelata as the research object and employed integrated transcriptomic and metabolomic analyses to evaluate the effects of cultivation temperatures set at 33 °C, 20 °C, and 4 °C on the vegetative mycelium of Morchella. Through these comprehensive analyses, we identified 2998 differentially expressed genes alongside 678 differentially accumulated metabolites. Utilizing Weighted Gene Co-expression Network Analysis (WGCNA), we constructed a co-expression network that revealed hub genes and metabolites within each module. Furthermore, through KEGG pathway analysis, we pinpointed significant metabolic pathways responsive to temperature stress—particularly those involved in purine metabolism, RNA degradation, two-component systems, ABC transporters, and pyruvate metabolism. Overall findings indicated that elevated temperatures exerted a more pronounced effect on M. sextelata mycelium compared to lower temperatures. These insights enhance our comprehension of the adaptive mechanisms of M. sextelata to thermal variations while providing valuable references for optimizing environmental temperature regulation in their cultivation as well as offering clues for selecting varieties capable of thriving under diverse thermal conditions.

Transcriptome-wide methylated RNA immunoprecipitation sequencing profiling reveals m6A modification involved in response to heat stress in Apostichopus japonicus.

Global warming-induced environmental stresses have diverse effects on gene expression and regulation in the life processes of various aquatic organisms. N6 adenylate methylation (m6A) modifications are known to influence mRNA transcription, localization, translation, stability, splicing, and nuclear export, which are pivotal in mediating stress responses. Apostichopus japonicus is a significant species in aquaculture and a representative of benthic organisms in ecosystems, thus there is a growing need for research on its heat stress mechanism. In this study, m6A-modified whole transcriptome profiles of the respiratory tree tissues of A. japonicus in the control (T18) and high-temperature stress (T32) groups were obtained using MeRIP-seq technology. The results showed that 7,211 common m6A peaks, and 9,459 genes containing common m6A were identified in three replicates T18 and T32 groups. The m6A peaks were found to be highly enriched in the 3' untranslated region, and the common sequence of the m6A peak was also enriched, which was shown as RRACH (R = G or A; H = A, C, or U). A total of 1,200 peaks were identified as significantly differentially enriched in the T32 group compared with the T18 group. Among them, 245 peaks were upregulated and 955 were downregulated, which indicated that high temperature stress significantly altered the methylation pattern of m6A, and there were more demethylation sites in the T32 group. Conjoint analysis of the m6A methylation modification and the transcript expression level (the MeRIP-seq and RNA-seq data) showed co-differentiated 395 genes were identified, which were subsequently divided into four groups with a predominant pattern that more genes with decreased m6A modification and up-regulated expression, including HSP70IV, EIF2AK1, etc. GO enrichment and KEGG analyses of differential m6A peak related genes and co-differentiated genes showed the genes were significantly associated with transcription process and pathways such as protein processing in the endoplasmic reticulum, Wnt signaling pathway, and mTOR signaling pathway, etc. CONCLUSION: The comparisons of m6A modification patterns and conjoint analyses of m6A modification and gene expression profiles suggest that m6A modification was involved in the regulation of heat stress-responsive genes and important functional pathways in A. japonicus in response to high-temperature stress. The study will contribute to elucidate the regulatory mechanism of m6A modification in the response of A. japonicus to environmental stress, as well as the conservation and utilization of sea cucumber resources in the context of environmental changes.

Mechanisms and control measures of low temperature storage-induced chilling injury to solanaceous vegetables and fruits

Low temperature storage is widely used for storage and transportation of fruits and vegetables after harvest. As a cold-sensitive fruit vegetable, post-harvest solanaceous vegetables and fruits are susceptible to chilling injury during low temperature storage, which reduces its sensory quality and edible quality and shortens its storage period, thus leading to huge economic losses. Therefore, it is an essential to clarify the occurrence mechanism of chilling injury caused by low temperature storage in solanaceous vegetables and fruits, and to propose corresponding prevention and control measures for chilling injury. In recent years, a series of progress has been made in the research on chilling injury prevention and control and low temperature stress tolerance of solanaceous vegetables and fruits. This paper describes the chilling injury symptoms of postharvest solanaceous vegetables and fruits, clarifies the physiological and biochemical mechanisms in the chilling injury process, the molecular mechanisms, and prevention and control measures, and summarizes the latest research advancements on chilling injury and chilling tolerance regulation of solanaceous vegetables and fruits, which can provide valuable references for low temperature storage and chilling injury prevention and control measures of solanaceous vegetables and fruits.

Analytical study on plastic loosening zone of weak surrounding rocks tunnel in high cold areas

AbstractThe analysis of plastic loosening zone of tunnels with cold condition, high in situ stress, and weak stratum is the key scientific problem of tunnel construction in cold areas. Based on the unified strength theory and considering the coupling effect of high in situ stress and low‐temperature field, the analytical model of the plastic loosening zone of tunnel surrounding rocks was proposed, and the influence laws of physical parameters (initial ground stress, freezing temperature, excavation radius, and intermediate principal stress) was explored. The results illustrate that: (1) with the coupling of low temperature and stress fields, the in‐situ stress has a more significant effect on the radius of the plastic loosening zone of the tunnel surrounding rocks, showing a nonlinear correlation. When the in situ stress is small, the influence of the temperature field on the radius of the plastic loosening zone is more obvious. (2) The radius of the plastic loosening zone of the tunnel surrounding rocks increases synchronously with the excavation radius and gradually decreases with the increase of the intermediate principal stress. (3) The greater the temperature difference in the low‐temperature field, the tunnel stability has a more significant response to the intermediate principal stress and is positively correlated with the coefficient of the intermediate principal stress. (4) In the actual project, the proposed model can well describe the mechanical behavior and deformation characteristics of tunnel surrounding rocks in low‐temperature environment, showing applicability. The research results are expected to provide a theoretical basis for the study of tunnel stability in cold areas.

High temperature stress induced changes in physiological, biochemical, hormonal and gene expression patterns in contrasting tomato genotypes

High temperature stress induced changes in physiological, biochemical, hormonal and gene expression patterns in contrasting tomato genotypes

Research on the design and thermal performance of vacuum insulation panel composite insulation materials

This study introduces a novel design methodology for composite insulation material aimed at reducing the operational energy consumption of buildings. Vacuum Insulation Panels (VIPs) are recognized for their excellent insulating properties due to their vacuum-sealed nature that minimizes thermal transmittance. However, VIPs are susceptible to damage from temperature stress and abrasion, which can compromise vacuum integrity and degrade performance over time. To mitigate this, a protective layer of rock wool board is adhered to the exterior of the VIP to create a composite insulation material. The thermal conductivity characteristics of the composite insulation materials are experimentally measured and then corroborated with simulations using ANSYS software to affirm the precision of finite element analysis methods. A composite Insulation wall model is constructed using ANSYS to analyze the impact of varying the thickness of the composite insulation materials and the pressure within the VIP on thermal performance. The findings demonstrate that the thermal transmittance coefficient of the composite insulated wall diminishes with increased insulation material thickness and rises with increased pressure within the VIP. Additionally, rock wool boards significantly enhance the durability of the composite insulation material.

Data-Driven Surrogate Modeling with Microstructure-Sensitivity of Viscoplastic Creep in Grade 91 Steel

AbstractTo support the development of advanced steel alloys tailored to withstand extreme conditions, it is imperative to account for the mechanical performance of components, while considering the influence of local microstructure on the macroscopic response. To this end, this study focuses on the development of microstructure-sensitive constitutive models for the mechanical response of Grade 91 steel exposed to extreme thermo-mechanical environments. Polynomial chaos expansion (PCE) surrogates are used to emulate high-fidelity polycrystal simulations of the viscoplastic response of Grade 91 steel as a function of the microstructure fingerprint (e.g., dislocations and precipitates). To cover a wide temperature–stress domain, two separate PCE surrogates—one that captures softening and the other that captures hardening behavior—are combined using another (sparse) Gaussian process regression model. The resulting constitutive creep surrogate model is integrated within the MOOSE finite element framework to simulate the intricate effects of microstructure, in particular MX-phase precipitates, on a component with a graded microstructure. Surrogate sensitivity analysis is applied to quantify the relevant impact of spatially varying microstructure on the creep response in a test-case involving a Grade 91 alloy with a prototypical weld.

Investigation of support structure configurations for selective laser melting of In718

The Selective Laser Melting (SLM), as a widely used metallic Additive manufacturing (AM) process, relies heavily on support structures. This study investigated the impact of different support structure configurations on the quality of In718 samples fabricated through SLM. On the basis of a comprehensive review of existing support structures configurations from the literature, three typical configurations: block, cone, and lattice, were designed to support cantilever parts for performance comparison. A coupled thermo-structural finite element simulation using ANSYS was performed to evaluate the temperature, deformation, and thermal stress evolution during the printing process of the three supported cantilever structures. The residual stress and deformation of the printed In718 cantilevers with different support structures were measured for validation. The results showed that block support exhibits the best strength and heat dissipation capability, making it the most effective support configuration for the SLM of In718 material. This research provides a fundamental procedure for evaluating the supporting performances among various support structures for the SLM process.

Comparative transcriptome analysis of low- and high-latitude populations of Charybdis japonica under temperature stress

Global climate change has caused rapid temperature changes in marine environments. Understanding how marine organisms respond to temperature changes can help predict their richness of future biodiversity. In this study, we examined the gene expression levels and the difference in the pathways that are responsive to acute temperature stress in low- and high-latitude populations of the shore swimming crab, Charybdis japonica. The two populations of C. japonica were exposed to low- and high-temperature stresses (15°C and 28°C) and used for transcriptome sequencing. Genetic regulatory ability changes were compared to determine the diverse response of the two crab populations to temperature change. The gene expression levels and functional enrichment analysis showed that the low-latitude crab regulated more genes (938) that were mainly enriched in DNA replication and metabolic pathways, whereas the high-latitude crab regulated less genes (309) that were mainly enriched in genetic information processing at low-temperature stress. Furthermore, the low-latitude crab regulated less genes (33) that were mainly enriched in genetic information processing, whereas the high-latitude crab regulated more genes (280) that were mainly enriched in signal transduction and cellular process at high-temperature stress. These results implied that the low-latitude population was more resilient to high-temperature stress, while the high-latitude population was more resilient to low-temperature stress. This study enhances our understanding of how different geographic C. japonica populations respond to varying temperature environments in their living zone, which could be helpful for predicting future biodiversity trends of intertidal crustaceans under global climate change.

Identification of Olea europaea CBF/DREB1 Family Genes in Abnormal Temperature Stress Response

Olea europaea, native to the Mediterranean region, has been widely cultivated for the nutritional content of its fruits and leaves. To adapt to climates beyond the Mediterranean, research on the climatic adaptation of O. europaea is urgently needed. Therefore, in this study, the CBF/DREB1 family genes in olives, which are related to cold tolerance, were genome-wide characterized. In total, four OeCBFs were screened; their open reading frame (ORF) were 552~684 bp in length, the encoded proteins were 20,786.60~25,235.16 Da, with 183~227 amino acids, and the theoretical isoelectric point (pI) were 4.91~9.13. The transcription of four OeCBFs was significantly different in olive tissues, especially OeCBF2 and OeCBF4, which were substantially more highly-expressed in aboveground tissues (terminal buds, young leaves, old leaves, and stems) than in underground tissues (thick and fine roots). Exposed to cold stress, OeCBF2 and OeCBF4 were up-regulated more obviously in olive leaves and stems, while OeCBF3 was induced to higher levels in the roots, implying the adaptation potential of the OeCBFs to low temperature stress. A comparison of the expression of the four OeCBFs in two varieties, Picholine (more tolerant to the other one) and Arbequina, found that the expression of OeCBFs was higher in most tissues of Picholine than that of Arbequina. When exposed to cold stress, the expression of the OeCBFs was also higher in the leaves and roots of Picholine than in Arbequina, further confirming the correlation between OeCBFs and cold tolerance of olive trees. This study not only deepens our understanding of the CBF gene family in olives, but also provides significant genetic information for olive breeding and improvement.

Flow rates alter the outcome of coral bleaching and growth experiments

It is important to consider flow rate explicitly in coral growth and bleaching studies across multiple species with differing life histories to guide coral conservation, management and captive culture. We quantified growth rates and coral bleaching responses to thermal stress (approx. 18 DHW) in flow-through aquaria with various current velocities to test whether flow conditions alter experimental outcomes. Across natural flow rates (< 1 to over 50 cm/sec), Montipora capitata, Pocillopora acuta, and Pocillopora meandrina showed increased growth and bleaching recovery at intermediate flow rates. Growth rates for all species increased from no flow to intermediate (50–100 turnovers-per-hour, ~ 10–30 cm/s), but then decreased at highest flow (> 190 tph, > 50 cm/s) although this trend was not significant for P. meandrina. The flow treatment with highest recovery from temperature stress differed across species, ranging from 4 tph in the flow-loving P. meandrina to 210 tph in the lagoonal M. capitata, indicating that natural flow regime alone is not predictive. Fragments from the same individual (e.g., P. acuta colony 8) held under identical thermal conditions continue bleaching and die under one flow regime (4 tph), whereas they recover from bleaching (30 tph) or grow fastest (105 tph) under different flow treatments. Flow is rarely reported in the literature, but uncontrolled flow effects may help to explain some of the variation in coral bleaching results reported across the literature. Significant differences among individual colonies, and colony-by-flow interactions, preclude generalizations beyond that flow rates can alter the outcome of both coral growth and bleaching experiments.

High temperature-induced Cscaspase-8 disrupts the developmental relationship between Chilo suppressalis and its endoparasitoid

Host hemolymph is an important place of growth and development for most endoparasitoids. Immunofluorescence assay showed that parasitism induced Chilo suppressalis larvae to produce large numbers of granulocytes, but high temperatures led to granulocytes apoptosis and loss of phagocytosis. In addition, high temperatures activated the endoplasmic reticulum apoptotic pathway, leading to apoptosis of prohemocytes. In the present study, the initiator Cscaspase-8 was obtained from the rice pest C. suppressalis. The results of real-time PCR showed that Cscaspase-8 expression was highest in hemocytes; furthermore, transcription was most highly in female adults. Cscaspase-8 was significantly induced when larvae were exposed to 39 °C for a 2-h period. Cscaspase-8 expression was significantly elevated after 2 d of parasitism. Results of the interference test showed that the survival rate of C. suppressalis larvae is not affected by Cscaspase-8 gene silencing under high temperature and parasitism stress. However, developmental delays were observed in Cotesia chilonis larvae when the host Cscaspase-8 gene was knocked down. These results contribute to the current knowledge on the regulatory mechanisms of apoptosis in insects subjected to high temperature and parasitism stress.