Temperature-dependent Fluorescence Research Articles

Reorientation of interfacial water molecules during melting of brain sphingomyelin is associated with the phase transition of its C24:1 sphingomyelin lipids

Melting of brain sphingomyelin (bSM) manifests as a broad feature in the DSC curve that encompasses the temperature range of 25 – 45 °C, with two distinguished maxima originating from the phase transitions of two the most abundant components: C24:1 (Tm,1) and C18:0 (Tm,2). While C24:1/C18:0 sphingomyelin transforms from the gel/ripple phase to the fluid/fluid phase, the dynamics of water molecules in the interfacial layer remain completely unknown. Therefore, we carried out a calorimetric (DSC), spectroscopic (temperature-dependent UV-Vis and fluorescence) and MD simulation study of bSM in the absence/presence of Laurdan® (bSM ± L) suspended in Britton-Robinson buffer with three different pH values, 4 (BRB4), 7 (BRB7) and 9 (BRB9), and of comparable ionic strength (I = 100 mM). According to DSC, T̅m, 1 (≈ 34.5 °C/≈ 32.1 °C) and T̅m, 2 (≈ 38.0 °C/≈ 37.2 °C) of bSM suspended in BRB4, BRB7, and BRB9 in the absence/presence of Laurdan® are found to be practically pH-independent. Turbidity-based data (UV-Vis) detected both qualitative and quantitative differences in the response of bSM suspended in BRB4/BRB7/BRB9 (T̅m: ∼ 35 °C/32.0 ± 0.2 °C/36.4 ± 0.4), suggesting an intricate interplay of weakening of van der Waals forces between their hydrocarbon chains and of increased hydration in the polar headgroups region during melting. The temperature-dependent response of Laurdan® reported a discontinuous, pH-dependent change in the reorientation of interfacial water molecules that coincides with the melting of C24:1 lipids (on average, T̅m (LTC/HTC): ≈ 31.8 °C/30.6 °C/30.5 °C). MD simulations elucidated the impact of Laurdan® on a change in the physicochemical properties of bSM lipids and characterized the hydrogen bond network at the interface at 20 °C and 50 °C.

Regulating the luminescence properties of Eu2W3O12 red-emitting phosphor via rare-earth ions doping for optical thermometry, white light-emitting diode and plant growth applications

To fulfil various applications, series of rare-earth (RE) ions (i.e., La3+, Gd3+, Sm3+) doped Eu2W3O12 (EWO) phosphors were synthesized. All the designed phosphors can emit glaring visible lights from Eu3+ and their fluorescence intensities were significantly enhanced through RE ions doping. To explore the impact of RE ions doping on the symmetric properties of Eu3+ in studied samples, theoretical calculation based on Judd-Ofelt theory was performed. Moreover, through utilizing temperature-related emission spectra, the thermal quenching behaviors of resultant phosphors were studied and found that their thermal stability had been improved by adding RE ions. Furthermore, the thermometric properties of designed phosphors were examined through adopting the single-band ratiometric technique to analyzing the temperature-dependent fluorescence intensity ratio of the emission band arising from 5D0 → 7F2 transition of Eu3+. It is found that maximum absolute and relative sensitivities of resulting phosphors were 0.197 and 1.202 % K−1, respectively. Additionally, two types of devices, i.e., white light-emitting diode (white-LED) and red-emitting LED, where the prepared phosphors play as red-emitting components, were fabricated. The packaged white-LEDs can emit warm white light with high color rendering index and low correlated color temperature, which are insensitive to operating current. Considering the red-emitting LEDs, their emission bands overlap with the absorption bands of plant pigments, which can promote plant growth and it was verified by peppermint growth experiments. These results verify that the introduction of RE ions is a feasible approach to modify the luminescence performances of phosphors to realize diversified applications.

Hydration- and Temperature-Dependent Fluorescence Spectra of Laurdan Conformers in a DPPC Membrane.

The widely used Laurdan probe has two conformers, resulting in different optical properties when embedded in a lipid bilayer membrane, as demonstrated by our previous simulations. Up to now, the two conformers' optical responses have, however, not been investigated when the temperature and the phase of the membrane change. Since Laurdan is known to be both a molecular rotor and a solvatochromic probe, it is subject to a profound interaction with both neighboring lipids and water molecules. In the current study, molecular dynamics simulations and hybrid Quantum Mechanics/Molecular Mechanics calculations are performed for a DPPC membrane at eight temperatures between 270K and 320K, while the position, orientation, fluorescence lifetime and fluorescence anisotropy of the embedded probes are monitored. The importance of both conformers is proven through a stringent comparison with experiments, which corroborates the theoretical findings. It is seen that for Conf-I, the excited state lifetime is longer than the relaxation of the environment, while for Conf-II, the surroundings are not yet adapted when the probe returns to the ground state. Throughout the temperature range, the lifetime and anisotropy decay curves can be used to identify the different membrane phases. The current work might, therefore, be of importance for biomedical studies on diseases, which are associated with cell membrane transformations.

Impact of the spatial structure of alkyl chains on properties of thiophene-substituted diketopyrrolopyrroles: Part II – Spectroscopic study

The study concerns the impact of a difference in geometry of the side alkyl chains of oligothiophene derivatives of diketopyrrolopyrrole (DPP) on their spectroscopic properties and aggregation in solutions, in Langmuir layers, and thin films. Using a combination of theoretical and experimental approaches, this study aims to explain the aggregating behaviour of thiophene-substituted DPP derivatives. Various methods were used to characterise the dyes, including absorption spectroscopy also with polarized light, fluorescence spectroscopy, Langmuir techniques, and time-dependent density functional theory (TD-DFT) calculations. The presented results emphasise a significant impact of side alkyl chains on DPP's molecular behaviour, notably evident in thin-layer structures. Interestingly, the deconvolution of the absorption spectra revealed three bands in the red region. Insightful analysis of temperature-dependent absorption, excitation, and emission fluorescence spectra indicates the co-existence of monomer, dimer, and a higher aggregate forms, most likely a tetrameric structures. Moreover, such a complexity of molecular organisation of dyes appears already in the solution. Differences in spectral properties of the dyes studied are robustly visible in changes in the spectra of the air–water interface, where the dye with the branched side group changes the mutual orientation in dimeric structures, leading to the formation of H-type aggregates, which was observed as an almost 20-nm spectral blue shift during Langmuir layer compression. The results presented highlight the need for care in interpretation of the intensity ratio of DPP spectra and spectral shift as the sole determinants of the aggregation state.

Interaction between polydopamine-based IONPs and human serum albumin (HSA): a spectroscopic analysis with cytotoxicity impact

Iron oxide nanoparticles (IONPs) have been extensively explored in biomedicine, bio-sensing, hyperthermia, and drug/gene delivery, attributed to their versatile and tunable properties. However, owing to its numerous applications, the functionalization of IONPs with appropriate materials is in demand. To achieve optimal functionalization of IONPs, polydopamine (PDA) was utilized due to its ability to provide a superior functionalized surface, near-infrared light absorption, and adhesive nature to customize desired functionalized IONPs. This notion of involving PDA led to the successful synthesis of magnetite-PDA nanoparticles, where PDA is surface-coated on magnetite (Fe3O4@PDA). The Fe3O4@PDA nanoparticles were characterized using techniques like TEM, FESEM, PXRD, XPS, VSM, and FTIR, suggesting PDA’s successful attachment with magnetite crystal structure retention. Human serum albumin (HSA), the predominant protein in blood plasma, interacts with the delivered nanoparticles. Therefore, we have employed various spectroscopic techniques, along with cytotoxicity, to inspect the effect of Fe3O4@PDA NPs on the stability and structure of HSA. The structural alterations were examined using circular dichroism (CD) and synchronous fluorescence spectroscopy (SFS). It has been observed that there are no structural perturbations in the secondary structure of the HSA protein after interaction with Fe3O4@PDA. Studies using steady-state fluorescence revealed that the inherent fluorescence intensities of HSA were suppressed after interaction with Fe3O4@PDA. In addition, temperature-dependent fluorescence measurements suggested that the type of quenching consists of both static and dynamic quenching simultaneously. A cytotoxicity study in Drosophila melanogaster larvae revealed no cytotoxic effects but did show a minor genotoxic effect only at higher concentrations.

Luminescence and Energy Transfer Properties of Color-Tunable Dy3+, Eu3+ co-Activated NaGdSiO4 Phosphor for WLED with Great Thermo-Stability.

A series of NaGd1-x-ySiO4: y Dy3+-x Eu3+ phosphors were synthesized by a high-temperature solid-phase method. The optimal doping ion concentration of Dy3+ ions for this phosphor was determined to be 1 % from the emission spectra. The energy transfer between Dy3+ and Eu3+ ions at 351 nm was investigated by photoluminescence spectra and fluorescence decay curves. At the excitation wavelengths of 275 nm, 351 nm, 366 nm, and 394 nm, a change from yellow to white to red light can be realized by adjusting the doping concentration of Eu/Dy ions. Particularly, by testing the temperature-dependent fluorescence spectrum of the phosphor, it can be found that the luminous intensity of the phosphor is as high as 96 % when 394 nm excitation is employed at 413 K. It was the maximum at this temperature comparing with other phosphors as far as we know. The color coordinate values show that the NaGd1-x-ySiO4:×Dy3+-y Eu3+ phosphors are very close to the white light color coordinates (x=0.33, y=0.33) under 351 nm excitation. Meanwhile, the correlated color temperature is between 5062-7104 K. These results indicate that this phosphor is a promising candidate for high-quality WLED.

Energy Barriers and Gap Between Two Excited States in a Dual-Emissive Carborane.

A thorough understanding of the internal conversion process between excited states is important for the designing of ideal multiple-emissive materials. However, it is hard to experimentally measure both the energy barriers and gaps between the excited states of a compound. For a long time, it is dubious if what was measured is the energy gap or barrier between two excited states. In this paper, we designed 1-(pyren-2'-yl)-9,12-di(p-tolyl)-o-carborane (2), which shows dual-emission in solution. Temperature-dependent fluorescence measurements show that the two emission bands in hexane are corresponding to two different excited states. The ratio of the emission bands is controlled by thermodynamics at higher temperatures and by kinetics at lower temperatures. Thus, the energy barrier and energy gaps between the two excited states of 2 can be experimentally estimated.

Revealing the interaction mechanism between bovine serum albumin (BSA) and a fluorescent coumarin derivative: A multispectroscopic and in silico approach

The interaction of biomacromolecules with each other or with the ligands is essential for biological activity. In this context, the molecular recognition of bovine serum albumin (BSA) with 4-(Benzo[1,3]dioxol-5-yloxymethyl)-7-hydroxy-chromen-2-one (4BHC) is explored using multispectroscopic and computational techniques. UV–Vis spectroscopy helped in predicting the conformational variations in BSA. Using fluorescence spectroscopy, the quenching behaviour of the fluorophore upon interaction with the ligand is examined, which is found to be a static type of quenching; fluorescence lifetime studies further verify this. The binding constant is discovered to be in the range of 104 M−1, which indicates the moderate type of association that results in reversible binding, where the transport and release of ligands in the target tissue takes place. Fourier-transform infrared spectroscopy (FT-IR) measurements validate the secondary structure conformational changes of BSA after complexing with 4BHC. The thermodynamic factors obtained through temperature-dependent fluorescence studies suggest that the dominant kind of interaction force is hydrophobic in nature, and the interaction process is spontaneous. The alterations in the surrounding microenvironment of the binding site and conformational shifts in the structure of the protein are studied through 3D fluorescence and synchronous fluorescence studies. Molecular docking and molecular dynamics (MD) simulations agree with experimental results and explain the structural stability throughout the discussion. The outcomes might have possible applications in the field of pharmacodynamics and pharmacokinetics.

Temperature- and pH-modulated Förster resonance energy transfer for establishment of white light emission

Heteroatom doping is an efficient approach for increasing fluorescence efficiency of carbon dots (CDs). Co-doping with heteroatoms may add additional active sites to CDs and expand their different capabilities. A simple and low-cost hydrothermal method was used to prepare nitrogen- and also nitrogen- and sulfur-rich CDs-decorated graphene oxide, NCDs-GO and N,SCDs-GO, respectively. The as-prepared hybrid CDs-GO samples are responsive to pH and temperature variations, implying pH and temperature-dependent fluorescence properties. The different properties of the CDs-GO hybrids were investigated using transmission electron microscopy and also energy-dispersive X-ray, Raman, and Fourier transform infrared spectroscopies. The ternary mixture of N,SCDs-GO, poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA), and rhodamine B (RB) was also used to detect pH changes via the Förster resonance energy transfer (FRET) process, where N,SCDs-GO and RB play the role of donor and acceptor, respectively, in the PDMAEMA aqueous solution medium. Fluorescence and ultraviolet–visible spectroscopies were used to assess the feasibility and efficiency of the FRET process. The donor–acceptor ratio was changed to get the broadly adjustable photoluminescence emission from blue to red, and especially white light. The aqueous ternary mixture has a wide range of potential applications in pH sensing, temperature monitoring, and anticounterfeiting. This colloidal system with controllable fluorescence and white light emission was used to design anticounterfeiting inks for security-marking of wood samples.

Excimer Fluorescence of Acriflavine Dye in Glycerol and Ethylene Glycol.

This research investigates the excimerisation of acriflavine dye in ethylene glycol and glycerol solvents. Acriflavine, a member of the acridine dye family, exhibits unique fluorescence properties with applications in various fields, including cellular nucleus observation, nucleic acid analysis, and dye laser active media etc. The study explores the impact of solvent and concentration on acriflavine's emission properties, with a focus on excimer formation, which can influence its suitability as a dye laser active medium. UV-Visible absorption spectroscopy reveals concentration-dependent absorption profiles, with distinctive monomer bands. Steady-state fluorescence studies demonstrate the emergence of red-shifted excimer fluorescence bands as concentrations increase in both solvents. Temperature-dependent fluorescence studies reveal the dynamics of excimer formation, suggesting dynamic diffusion as the excimerisation mechanism. Time-resolved fluorescence spectroscopy confirms the singlet character of both monomer and excimer states, providing insights into the excimerisation process. Critical concentration values are determined, representing the equilibrium between monomeric and excimeric forms. The study also explores pH-induced spectral shifts, highlighting the influence of acidity on fluorescence properties. Overall, this research deepens our understanding of acriflavine's excimerisation in ethylene glycol and glycerol, offering insights that can enhance its diverse applications, especially in laser technologies.

Bisphenol a modification and how its structure influences human serum albumin binding force

Bisphenol A (BPA) is an environmental hormone with substantial physiological toxicity to the human body. Three electron-withdrawing derivatives of BPA are synthesized in this study to reduce its toxicity. The interaction mechanism between BPA and its three derivatives with human serum albumin (HSA) is investigated using molecular docking, electrochemistry, circular dichroism spectrum analysis, and fluorescence spectroscopy. Temperature-dependent tests and time-resolved fluorescence spectra reveal that all four compounds dynamically quench the internal fluorescence of HSA. Based on molecular docking and site competition outcomes, four compounds are primarily bound to site I's active pocket. Thermodynamic parameters indicate that the compounds’ interaction with HSA is spontaneous, and introducing weak electron-withdrawing groups changes the action force. Circular dichroism and synchronous fluorescence measurements suggest four compounds impact HSA's structure. The substituents' electron attraction capacity determines their impact. Electrochemical studies examine the effect of electron-absorbing groups on the BPA and HSA binding capacity. Pharmacokinetics showed that nitro-substituted BPA may be a potential superior substitute for BPA. These results indicate crucial practical value, providing theoretical support for future research.

Spectroscopic investigation and molecular docking analysis of an FRET probe: Trypsin from bovine pancreas@Coumarin 440 dye conjugate

Herein, a systematic investigation of energy transfer from bovine pancreas trypsin to coumarin 440 (C440) dye is presented with an aim to design a FRET probe, as trypsin is an important enzyme for absorption and digestion of nutrients in the small intestine. Conformational changes in trypsin upon interaction with C440 dye are studied by employing both spectroscopic and molecular docking techniques. Steady state and time resolved measurements validate the formation of trypsin-C440 complex via dynamic quenching, that confirms the role of C440 as an inhibitor to suppress the activity of trypsin. Spectral overlap integral, Förster's distance, rate and energy transfer efficiency are calculated from steady state measurements. The observed blue shift in fluorescence suggests conformational changes due to hydrophobicity that arises in trypsin structure on binding with C440 possibly due to their interaction through H-bond (SER195 and GLN192), hydrophobic (GLN192 and HIS57) and π-π stacking bonding (HIS57). The stability of trypsin@C440 bio-conjugate at higher temperature was established from temperature dependent PL studies and the thermodynamic parameters determined agree with second law of thermodynamics. The thermodynamic parameters such as change in enthalpy (ΔH=172.2Jmol−1), change in entropy (ΔS=15.3Jmol−1K−1) and the respective approximately same and unity values of Gibb's free energy (ΔG) and Hill coefficient (n), as well as binding affinities determined from temperature dependent fluorescence studies validate the hydrophobic, spontaneous, exothermic process engaged in trypsin@C440 bio-conjugate.

Ultrasound-switchable fluorescence thermometry with dual detection channels using temperature-sensitive liposomes.

Temperature measurements in biological tissues play a crucial role in studying metabolic activities. In this study, we introduce a noninvasive thermometry technique based on two-color ultrasound-switchable fluorescence (USF). This innovative method allows for a local temperature mapping within a microtube filled with temperature-sensitive liposomes as nano imaging agents. By measuring the temperature-dependent fluorescence emission of the liposomes using a spectrometer, we identify four characteristic temperatures. The local background temperature can be estimated by analyzing the corresponding appearance time of these four characteristic temperatures in the dynamic USF signals captured by a camera-based USF system with two detection channels. Simultaneous measurements with an infrared (IR) camera showed a 0.38°C ± 0.27°C difference between USF thermometry and IR thermography in a physiological temperature range of 36.48°C-40.14°C. This shows that the two-color USF thermometry technique is a reliable, noninvasive tool with excellent spatial and thermal resolution.

A novel laser-induced fluorescence concept for thermometry measurements in machining lubricoolants

This study investigates a two-colour laser-induced fluorescence (LIF) technique for thermometry in cooling lubricants (CL) for machining. The diagnostic technique should enable a simultaneous determination of cooling film thickness and film temperature, which is relevant for typical machining processes like turning and milling processes. The temperature determination is based on a temperature-sensitive fluorescence intensity ratio of a special dye determined in suitable spectral regions representing common band pass filters. For this purpose, two CL emulsions CL6 (6 vol.% CL, 94 vol.% water; normal machining) and CL10 (10 vol.% CL, 90 vol.% water; heavy machining) and its individual components were doped with the fluorescence dye Eosin-Y. Temperature dependent spectral LIF intensities were recorded in the range of 273–313 K, which are relevant for milling and cutting operations. Furthermore, absorption spectra were analysed as well. The temperature-dependent fluorescence measurements revealed a temperature limit for the emulsion stability. The emission peaks of Eosin-Y are shifted with increasing temperature towards longer wavelengths. The sensitivities of CL10 (1.88%/K) and CL6 (1.58%/K) are comparable to or even higher than the sensitivities of other LIF dyes provided in the literature. The literature-based dyes were however not determined in those CL. The measurements showed, that the investigated tracer-CL/water emulsions mixed with the dye enable a reliable temperature determination.

Two-Dimensional Hybrid Perovskite with High-Sensitivity Optical Thermometry Sensors.

Optical thermometry has gained significant attention due to its remarkable sensitivity and noninvasive, rapid response to temperature changes. However, achieving both high absolute and relative temperature sensitivity in two-dimensional perovskites presents a substantial challenge. Here, we propose a novel approach to address this issue by designing and synthesizing a new narrow-band blue light-emitting two-dimensional perovskite named (C8H12NO2)2PbBr4 using a straightforward solution-based method. Under excitation of near-ultraviolet light, (C8H12NO2)2PbBr4 shows an ultranarrow emission band with the full width at half-maximum (FWHM) of only 19 nm. Furthermore, its luminescence property can be efficiently tuned by incorporating energy transfer from host excitons to Mn2+. This energy transfer leads to dual emission, encompassing both blue and orange emissions, with an impressive energy transfer efficiency of 38.3%. Additionally, we investigated the temperature-dependent fluorescence intensity ratio between blue emission of (C8H12NO2)2PbBr4 and orange emission of Mn2+. Remarkably, (C8H12NO2)2PbBr4:Mn2+ exhibited maximum absolute sensitivity and relative sensitivity values of 0.055 K-1 and 3.207% K-1, respectively, within the temperature range of 80-360 K. This work highlights the potential of (C8H12NO2)2PbBr4:Mn2+ as a promising candidate for optical thermometry sensor application. Moreover, our findings provide valuable insights into the design of narrow-band blue light-emitting perovskites, enabling the achievement of single-component dual emission in optical thermometry sensors.

Cell-resistant wavelength-shifting molecular beacons made of L-DNA and a clickable L-configured uridine.

Wavelength-shifting molecular beacons were prepared from L-DNA. The clickable anchor for the two dyes, Cy3 and Cy5, was 2'-O-propargyl-L-uridine and was synthesized from L-ribose. Four clickable molecular beacons were prepared and double-modified with the azide dyes by a combination of click chemistry on a solid support for Cy3 during DNA synthesis and postsynthetic click chemistry for Cy5 in solution. Cy3 and Cy5 successfully formed a FRET pair in the beacons, and the closed form (red fluorescence) and the open form (green fluorescence) can be distinguished by the two-color fluorescence readout. Two molecular beacons were identified to show the greatest fluorescence contrast in temperature-dependent fluorescence measurements. The stability of the L-configured molecular beacons was demonstrated after several heating and cooling cycles as well as in the cell lysate. In comparison, D-configured molecular beacons showed a rapid decrease of fluorescence contrast in the cell lysate, which is caused by the opening of the beacons, probably due to degradation. This was confirmed in cell experiments using confocal microscopy. The L-configured molecular beacons are potential intracellular thermometers for future applications.

Ratiometric dual-emitting thermometers based on rhodamine B dye-incorporated (nano) curcumin periodic mesoporous organosilicas for bioapplications.

This study explores the potential of combining periodic mesoporous organosilicas (PMOs) with a fluorescent dye to develop a ratiometric thermometry system with enhanced stability, sensitivity, and biocompatibility. PMOs, ordered porous materials known for their stability and versatility, serve as an ideal platform. Curcumin, a natural polyphenol and fluorescent dye, is incorporated into PMOs to develop curcumin-functionalized PMOs (C-PMO) and curcumin-pyrazole-functionalized PMOs (CP-PMO) via hydrolysis and co-condensation. These PMOs exhibit temperature-dependent fluorescence properties. The next step involves encapsulating rhodamine B (RhB) dye within the PMO pores to create dual-emitting PMO@dye nanocomposites, followed by a lipid bilayer (LB) coating to enhance biocompatibility and dye retention. Remarkably, within the physiological temperature range, C-PMO@RhB@LB and CP-PMO@RhB@LB demonstrate noteworthy maximum relative sensitivity (Sr) values of up to 1.69 and 2.60% K-1, respectively. This approach offers versatile means to create various ratiometric thermometers by incorporating different fluorescent dyes, holding promise for future temperature sensing applications.

Efficient monodisperse upconversion composite prepared using high-density local field and its dual-mode temperature sensing.

Enhanced upconversion via plasmonics has considerable potential in biosensors and solar cells; however, conventional plasmonic configurations such as core-shell assemblies or nanoarray platforms still suffer from the compromise between the enhancement factor and monodispersity, which has failed to meet the requirement of the materials for the in vivo all-solution-prepared solar cells and biosensors. We herein report a monodisperse metal-dielectric-metal (MDM) type upconverted hybrid material with high efficiency. The lanthanide-doped upconversion nanoparticles (UCNPs) were sandwiched by two gold nanodisk mirrors, and the highly localized excitation field around the UCNPs together with the efficient coupling enhanced the upconversion. The upconversion intensity can then be effectively regulated and improved by three to four orders of magnitude. As per the measurement of the temperature-dependent fluorescence intensity and spectra shift, a dual-mode nanothermometer based on our proposed hybrid materials was demonstrated. This MDM-type upconverted hybrid material demonstrated the merits of high efficiency and monodispersity, which demonstrated promise in in vivo biosensors and solar cell fabrication techniques such as spin-coating and roll-to-roll.

Substituent effects on spin-crossover Fe(II)N4O2 pyrenylhydrazone complexes.

Multifunctional magnetic materials have broad application prospects in molecular switches and information storage. In this study, four mononuclear Fe(II) complexes are synthesized using a series of pyrenylhydrazone ligands HL1-4. Two deprotonated ligands are coordinated to the iron(II) ions in an enolic form, leading to neutral complexes FeII(Lx)2·xsol with a FeIIN4O2 octahedral coordination environment. Magnetic measurements suggest that complex Fe(L1)2·2ACE (1·2ACE, ACE = acetone) is mainly low spin below 300 K and complex Fe(L3)2·ACE (3·ACE) is high spin, whereas complexes Fe(L2)2 (2) and Fe(L4)2·6H2O (4·6H2O) exhibit gradual spin crossover behavior. The spin states of complexes 1-4 are confirmed by single-crystal X-ray diffraction analysis. The substituent effect on the magnetic properties of the complexes is significant in this system. Temperature-dependent fluorescence emission spectra show the coexistence but no coupling effect of spin crossover and fluorescence for complexes 2 and 4·6H2O.

Probing the heterogeneity of molecular level organization of ionic liquids: a comparative study using neutral Nile red and cationic Nile blue sulfate as fluorescent probes for butyrolactam-based protic ionic liquids.

Ionic liquids (ILs) are liquid salts composed of cations and anions, known for their significant local heterogeneity at the molecular level. To understand the microheterogeneity with regard to their local polarity and local viscosity, we have used two structurally similar but chemically distinguishable fluorescent probes: Nile red (NR), a neutral molecule, and Nile blue sulfate (NBS), a charged molecule. A comparative study of the response of the two probes to the molecular level heterogeneity of ILs is expected to provide a better clarity of understanding regarding the charged polar domain and the uncharged hydrophobic domain of ILs. Towards this, we synthesized two butyrolactam-based protic ionic liquids (PILs), i.e., BTF and BTD, with the same ionic headgroup ([BT]+) and different alkyl tails ([RCOO]-), where {R = H, C11H23}. BTF has no significant hydrophobic domain, whereas BTD has a larger hydrophobic domain. Temperature-dependent fluorescence parameters such as fluorescence intensity, lifetime, and anisotropy were measured for both NR and NBS molecules. The use of a pair of structurally similar but ionically different probes enables differential estimation of parameters like the microviscosity of a domain using the fluorescence anisotropy parameter (r). The absorption and emission spectra of both probe molecules are observed to be blue shifted upon going from BTF to BTD. NR showed a significant blue shift in absorption and emission band maxima. Conversely, NBS exhibited a small wavelength shift, possibly influenced by the preferred location of their charged head group domain. Temperature-dependent rotational relaxation time (θ) of NR in BTD is smaller than that of NBS by 60-70%, indicating that stronger charge-charge interactions exist between the polar domain of BTD and NBS. Moreover, it is observed that the local viscosity of the BTF IL around both probes is similar, whereas there is a considerable difference for the BTD IL. These results are an indication that NBS being charged prefers to locate itself in the charged head group region of the IL, whereas NR being neutral tends to reside both in the hydrophobic domain and in the head group but is predominantly located in the hydrophobic domain.