Temperature Cycling Research Articles

Design and performance of indium seals for size-constrained tunable laser spectrometers.

Indium seals have been used extensively in ultra-high vacuum and cryogenic applications. Typically, these seals use indium alongside or in place of other metal gaskets in stainless-steel vacuum flanges, with some custom applications for flanges sealing directly with glass (optics or tubes). Here, we present the design and performance of three pressed indium seals (99.99% In) between aluminum and 0.5 in. diameter sapphire optics and aluminum and gold coated Kovar semiconductor packages (TO-66 and TO-39). Test fixtures were designed to mimic those of future tunable diode laser spectrometers for Earth, planetary, and manned spaceflight environmental monitoring applications. Successful high-hermeticity seals [<10-10 atm cc/s (He)] were achieved for all seals formed with sufficient pressure applied to allow indium to flow between mating surfaces. The hermeticity of the seals was maintained after temperature cycling (-10 to +80 °C, 20 cycles), with the optical seals surviving extended duration tests (-55 to +85 °C, per MIL-STD-883). Semiconductor packages (TO-39) subjected to these extended tests saw a moderate increase in leak rate [∼5 × 10-9 atm cc/s (He)]; however, further testing showed that either the glass-metal package seals or the indium were affected (the sample size was too small to draw firm conclusions for future applications). Overall, these results suggest long-term survivability of indium seals for Kovar-aluminum and sapphire-aluminum interfaces [>10 years at 10-10 atm cc/s (He)], where the coefficient of thermal expansion differs by approximately four times.

An advanced ceramifiable organic-inorganic hybrid polysiloxane coating with superior moisture-resistant property

A ceramifiable organic-inorganic hybrid polysiloxane, prepared via a straightforward solution blending method, was successfully coated on the surface of silicon dioxide ceramic via a scrapping method. A uniform and dense lithium aluminum borosilicon (LABS) vitrified layer in situ formed on the surface of silicon dioxide ceramics was successfully prepared through liquid phase filling method to fulfill the moisture resistance requirements under high temperature cycle conditions. Effects of aluminum content on the microstructure change process and moisture resistance properties of the ceramifiable organic-inorganic hybrid polysiloxane have been systematically researched. With the increase of aluminum content, the ceramic yield of the hybrid polysiloxane and the heat loss capacity of LABS glass-ceramics increase. The crack-free and high temperature fluid vitrified layer endows the LABS glass-ceramic with excellent thermal shock resistance cycle ability, self-healing ability and moisture resistance. Results showed that the LABS vitrified coating with an aluminum-boron ratio of 1:2 presents the most appealing thermal shock cycle resistance and crack self-healing ability after 20 thermal cycles, as well as a water absorption rate of 0.3814 %. By refining the application of modified polysiloxane moisture-resistant coatings in high-temperature circulation environments, this work shed lights on the importance of in situ growth LABS vitrified coating in accelerating surface reconstruction and improving moisture resistance, incenting additional innovative breakthroughs in the LAS-based glass-ceramic materials design and fabrication within the aviation field.

Synthesis and upconversion color Tunability luminescence of K5Yb(MoO4)4 phosphor doped with Er3+and optical temperature sensing applications

A series of double molybdates with palmierite-related structure phosphors K5Yb1-x (MoO4)4:xEr3+ were synthesized by a solid-state method. It has been demonstrated that the K5Yb1-x (MoO4)4: xEr3+ phosphors are capable of exhibiting the characteristic green and red UC emission of Er3+ ions with excitation at 980 nm. Moreover, the green light emission is far more than the red light emission, so that the sample emits a powerful green light, which belongs to the two-photon absorption process. The upconversion efficiency is peaked when the content of Er3+ ions is 10 mol %. The optical thermometry properties of phosphors were explored by observing that the green UC emission intensity is temperature dependent. The maximum sensor sensitivity of the studied phosphor was discovered to be about 1.61%K−1 at the optimum doping concentration. And the phosphor is demonstrated to have high thermal stability by temperature cycling test. Eventually, a green light-emitting diode device was realized by using synthesized particles and a 980 nm near-infrared chip, which can emit a more obvious green light when the voltage reaches 1.80 V and the current can reach 800 mA, thus confirming its applicability in solid-state lighting. And the LED devices have been tested for life stability with little or no light degradation. These properties make the phosphors not only suitable for non-contact optical temperature measurement, but also able to be applied to solid state lighting.

External short circuit of lithium-ion battery after high temperature aging

The microscopic and macroscopic changes of lithium-ion batteries after high temperature cycling and their effect on external short circuit (ESC) are studied in this study. The results indicate that solid electrolyte interphase and cathode electrolyte interphase cover the surface of anode and cathode. Transition metal, Mn is dissolved from the cathode. Capacity and resistance decreases and increases after cycling at high temperature. The safety of batteries after ESC is ranked as: 70 % state of health (SOH) > 100 % SOH > 80 % SOH > 90 % SOH. Thermal runaway only occurs to battery with 90 % SOH after ESC. Increase of resistance after cycling affects heat generation during ESC less. Onset temperature and thermal runaway temperature increases and decreases owing to solid electrolyte interphase growth and Mn dissolution. Compared to fresh battery, safety of battery with 70 % SOH after ESC increases. Fast discharging causes side reactions for aged batteries, which also generate heat. The heat generation effect of fast discharging decreases with the decrease of SOH after 90 % SOH. Local micro internal short circuit causes more heat generation for aged batteries. The results are important for safety control of lithium-ion battery.

Temperature manipulation during incubation: effect on embryo development and incidence of white striping and expression of related genes in broiler chickens from two commercial breeds

ABSTRACT 1. This study evaluated the effects of cyclic eggshell temperature between 10 and 14 d of embryogenesis on traits viz. the expression of MYOZ2, PPARγ and GPx7 in breast muscle, meat quality and incidence of white striping at slaughter age. 2. Eggs were obtained from Cobb and Ross broiler breeders to investigate the response of breeds to eggshell temperature, which regulated air temperature. A total of 784 eggs were incubated at either the control eggshell temperature (37.8°C) from 0 to 18 d or exposed to cyclic high eggshell temperature (CHT) at 38.8°C for 6 h/d between 10 and 14 d of incubation. The temperature was 36.8°C between 18 and 21 d. Hatched chicks were reared under optimum rearing conditions. The birds were sampled at 19 d of incubation, at hatch and at 42 d post-hatch. 3. There was no effect of eggshell temperature on yolk-free body weight and residual yolk sac weight. The CHT chicks had wider breasts on the day of hatching. 4. At hatch and 42d post-hatch, PPARγ expression in Cobb-CHT was upregulated 4.78-fold and downregulated 3.28-fold, respectively, compared to the Cobb-control. At slaughter age, chickens from Ross-CHT had 1.98- and 2.33-fold upregulated PPARγ and GPX7 expressions, respectively, compared to Ross-control. The CHT increased GPx7 expression in the Cobb-CHT day-old chicks compared to the Cobb-control. On ED19, MYOZ2 expression was upregulated in Cobb and downregulated in Ross by CHT. 5. The effects of breed and eggshell temperature on pH15, L*, a*, expressible juice and cooking loss were not significant. The CHT increased the incidence of severe white striping lesions in Ross chickens. 6. It was concluded eggshell temperature modulated embryo development, incidence of white striping and expression of related genes differently in the two commercial breeds.

Induced sexual reproduction ex situ reveals bidirectional sex change of the coral Montastraea cavernosa

Induction of gonad maturation and synchronized spawning of corals ex situ has been mostly used to propagate corals for restoration, but it also provides a unique opportunity to study the reproductive biology of species. We present, for the first time, the induction of gonad maturation and synchronous spawning of the coral Montastraea cavernosa in a laboratory. This was achieved by mimicking the annual temperature, sun and moon cycles experienced in the northern portion of Florida’s Coral Reef. Similarly to field observations, peak spawning of M. cavernosa colonies in the laboratory occurred 5–10 nights after the full moons of July, August, and/or September, 75–125 min after sunset. This coral species was known as gonochoric, meaning colonies are either females (release eggs) or males (release sperm). Yet, three consecutive years observing the same colonies ex situ revealed that these corals are capable of changing sexes annually, and they can do so in both directions. Spawning observations and histology showed corals shifting from male to female, others shifting from female to male, and several changing sex one year and reverting to their original sex in the following year. The sex change was not related to size, nor likely socially driven. A greater number of colonies was observed to shift from female to male when food provision was reduced. Further studies are required to determine if food availability drives sex change in this species.

A numerical algorithm for damage progression of reinforced concrete bridge piers during air temperature and solar radiation cycles

Reinforced concrete (RC) solid piers are unavoidably affected by air temperature changes and solar radiation during service life. Nevertheless, the deterioration of pier concrete with increased exposure age remains unclear. A novel thermal-mechanical numerical algorithm (finite element model) for characterizing the deterioration characteristics of RC structures under cyclic environmental loads has been suggested. The deterioration of RC pier concrete after 100 years of air temperature and solar radiation cycles is simulated. The numerical results demonstrate that tensile damage of pier concrete during air temperature and solar radiation cycles increases continuously with exposure age. After one year of exposure, the tensile damage value of pier surface concrete increased to 0.201 and further increased to 0.286 and 0.357 as the exposure age grew to 10 and 100 years. Pier concrete tensile damage can be mitigated by using surface short-wave absorption-reducing methods, controlling the thermal properties of concrete, and raising the concrete peak tensile strain. The proposed finite element framework and numerical solutions enable a viable simulation-based method for the analysis of bridge structural long-term deterioration behavior and design of the bridge engineering.

NaClO3 Crystal Growth and Dissolution by Temperature Cycling in a Sessile Droplet

Sodium chlorate is the most popular compound used to study spontaneous symmetry breaking by means of crystallization. Therefore, it is important to know the behavior of the solid particles. NaClO3 crystal growth and dissolution are investigated in an aqueous sessile droplet subjected to numerous temperature cycles. On cooling, in addition to the classical formation of repeated elongated fluid inclusions, there is a reproducible appearance of prismatic fluid inclusions (PFIs) at the corners of single crystals. The underlying mechanism involves the complete termination of the (110) face growth and the propagation of the {100} faces, which can close the PFIs. This study reports that on heating, transient donut-like single crystals formed, which could lead to their segmentation, even without stirring the suspension. The systematic addition of other sodium salts with chlorine atoms at different oxidation states did not change these observations.

Eocene maar sediments record warming of up to 3.5 °C during a hyperthermal event 47.2 million years ago

Eocene hyperthermal events reflect profound perturbations of the global carbon cycle. Most of our knowledge about their onset, timing, and rates originates from marine records. Hence, the pacing and magnitude of hyperthermal continental warming remains largely unaccounted for due to a lack of high-resolution climate records. Here we use terrestrial biomarkers and carbon isotopes retrieved from varved lake deposits of the UNESCO World Heritage site ‘Messel Fossil Pit’ (Germany) to quantify sub-millennial to millennial-scale temperature and carbon isotope changes across hyperthermal event C21n-H1 (47.2 million years ago). Our results show maximum warming of ca. 3.5 °C during C21n-H1. We propose that two components are responsible for the warming pattern across the hyperthermal: (1) the massive release of greenhouse gases into the atmosphere-ocean system and (2) half-precession orbital forcing indicated by ~12.000-year temperature cycles. The carbon isotope record of bulk organic matter indicates a sharp, 7‰ decrease at the peak of the hyperthermal, corresponding to increased organic carbon content and a shift in the lake algal community. Collectively, our proxy data reveal the structure of continental temperature response during the hyperthermal event that is characterized by overall warming with a superimposed pattern of sub-orbital scale temperature fluctuations.

Ru Passivation Layer Enables Cu-Cu Direct Bonding at Low Temperatures with Oxidation Inhibition.

Stacking semiconductor chips allows for increased packing density within a given footprint and efficient communication between different functional layers of the chip, leading to higher performance, improved speed, and reduced power consumption. In such vertical stacking, achieving homogeneous electrical and mechanical bonding between heterogeneous chips is crucial, which is termed Cu to Cu direct bonding (CCDB) technology. However, conventional CCDB required a high temperature of over 250 °C to allow Cu diffusion and a vacuum condition for inhibiting Cu oxidation, limiting its practical utilization. Here, we propose that the covering of the Ru layer enables a reliable CCDB as low as 200 °C without concerns regarding oxidation. The bonding strength was as high as 2.24 MPa, and it was endurable at the -45 and 125 °C temperature cycle test for 500 cycles. Through microscopic analysis, we have identified that Cu diffuses through the intercluster boundaries of the Ru layer and moves to the surface, and these atomic Cu ions are recrystallized at the bonding interface, enabling stable bonding at lower temperatures. Specifically, we observed a trade-off between Cu diffusion distance and oxidation inhibition capability depending on the thickness of Ru and found that a 6 nm-thick Ru is optimal, balancing these factors.

Study of the Bias Driven Threshold Voltage Drift of 1.2 kV SiC MOSFETs in Power Cycling and High Temperature Gate Bias Tests

Threshold voltage instability remains a challenging aspect for metal-oxide semiconductor-field-effect-transistors (MOSFETs) made from silicon carbide (SiC). SiC MOSFETs from two manufacturers, with planar and trench gate structure respectively, have been tested under different test procedures, including power cycling and high temperature gate bias tests. The standard power cycling test setup has been modified to enable an in situ threshold voltage read-out procedure with the hysteresis method. The recorded threshold voltage drift has been compared with results from high temperature gate bias tests applying a simple power law fit, with the intention to predict the drift in power cycling tests. For the group with trench MOSFETs comparable results between power cycling and gate stress tests have been achieved.

Comparison of fatigue characteristics and failure analysis of Ni-based superalloy subjected to thermomechanical fatigue under different phase conditions

In this research, the thermomechanical fatigue (TMF) characteristics of a second-generation Ni-based single-crystal superalloy were investigated. The combined effects of temperature cycling and mechanical stress were examined using a strain-controlled approach under different TMF testing conditions. The results indicated that cyclic softening occurred during the early stages during in-phase (IP) loading. In contrast, out-of-phase (OP) tests exhibited cyclic hardening, as evidenced by an increase in the stress range, which intensified at higher mechanical strain amplitudes. This resulted in a shorter fatigue life compared to the IP TMF case. The crack distribution patterns and damage mechanisms on the cross-sectional and fracture surfaces of the failed specimens were analyzed. In the OP TMF tests, oxidation-assisted cracking was identified as the primary damage mechanism. The dominance of oxide layers was a key distinguishing feature. Additionally, twinning-related deformation and topologically close-packed (TCP) phase particles were observed in specimens subjected to a higher mechanical strain of 0.6%, where they ran parallel to the main crack, contributing to a reduction in lifetime. Conversely, the IP TMF cases were mainly dominated by creep damage mechanisms, with some signs of oxidation penetration observed during testing. The application of the Ostergren model to the fatigue life prediction of a Ni-based single-crystal superalloy under both conditions was evaluated. As this model was insufficient, a modified Ostergren model was proposed by incorporating the maximum and amplitude stresses in the power law forms.

Self-healing and thermal transport behavior in catalytic vitrimer-graphene composite

Vitrimers are a distinct category of polymers that could conduct dynamic cross-linking in response to temperature stimuli. In this work, using a molecular dynamics simulation model, we explore self-healing and the thermal transport behavior of vitrimer-graphene composites to overcome its inherent slow self-healing process. The temperature-dependent reversible cross-link mechanisms, which possess the capacity to dynamically modify the mechanical properties of these substances, are studied by explicitly integrating the temperature-dependent reaction probabilities. This modeling approach efficiently predict the changes in the mechanical properties of vitrimers when undergoing temperature cycling both above and below the topological freezing point, as well as the damage healing and subsequent recuperation of mechanical behaviors. The heat transport behavior of the graphene-vitrimer composite is investigated using non-equilibrium molecular dynamics in conjunction with self-healing models. The thermal conductivity of vitrimer-graphene composites, calculated by including a bilayer graphene sheet with varied flake size and interlayer spacings, exhibits a considerable enhancement as compared to standalone vitrimers. Notably, the thermal conductivity is subject to change when the separation distance changes. These results shed light on the self-healing and heat transmission in vitrimer and open the door to possible applications in several fields, including electronics, energy efficiency, aerospace, and materials research.

Improved annual temperature cycle function for stream seasonal thermal regimes

AbstractSeasonal regimes of stream temperatures are important for ecological health as well as for societal water use. Seasonal regimes can be captured in the annual temperature cycle (the mean temperature for each day of the year) or in summary statistics such as seasonal mean temperatures, the former of which is the focus of this work. The annual temperature cycle is often characterized as a sine function, which performs satisfactorily for most streams. However, the sine function is unable to capture major seasonal variations, particularly for colder, drier, and high‐elevation regions. Seasonal summary statistics are effective for classification but do not capture the full time series, preventing the use of lost time‐series information, and lack context for the comparison of trends, hindering distinction between different causes of similar seasonal trends. We propose an improved function called the “three‐sine model” to describe the stream annual temperature cycle with higher accuracy and demonstrate its use in two case studies. The three‐sine model uses a cosine function over the entire year coupled with two seasonal anomaly sine functions. The three‐sine model captures the stream annual temperature cycle with eight parameters, reveals distinct spatial trends, and outperforms the sinusoidal model for all elevations and 99% of streams. We conclude that this approach can support improved stream temperature analysis by capturing detailed seasonal trends in context.

Effect of cyclic oxidation temperature on compressive strength of Cu-based brake pad for high-speed train

The cyclic oxidation tests of Cu-based brake pads at temperatures of 25, 300, 400, 500, 550, 600, 650 and 700 °C were conducted to simulate the oxidation of the friction surface under different braking speeds. Furthermore, the effect of cyclic oxidation temperature on the compressive strength was investigated. The results show that the cyclic oxidation process of Cu-based brake pads can be divided into three stages: mild oxidation (≤400 °C), moderate oxidation (500–600 °C) and severe oxidation (≥650 °C). Mild oxidation results in the formation of spherical Cu2O particles. The surface is covered by Cu2O and Fe2O3 nanosheets for moderate oxidation. Severe oxidation is characterized by a continuous thick CuO film, Fe2O3 nanosheets, and eroded graphite particles. The compressive strength and toughness of Cu-based brake pads show a declining trend as the cyclic oxidation temperature rises. The compressive strength of the Cu-based brake pad after oxidized at 700 °C, recorded at 30.56 MPa, is considerably lower than that of the original samples, which was 132.2 MPa. This reduction in compressive strength is attributed to the embrittlement of the metallic matrix and the formation of pores from graphite oxidation.

Decorrelation rate and daily cycle in sub-daily time series of SAR coherence amplitude

A dataset of sub-daily C-band data, acquired with a ground-based synthetic aperture radar, has been used to study soil and vegetation dynamics during a complete growing season in a controlled agricultural test site. The data have been exploited to analyse the rate and sources of decorrelation in the scene, as well as the consequences of the observation conditions of a sub-daily satellite (with either low, medium or geosynchronous orbit): short revisit times, availability of multiple acquisitions during a single day, and shallow observations at some incidence angles. Repeat-pass coherence is found to be less affected by temporal decorrelation when the primary image is acquired during nighttime or the last hours predawn. Regarding the incidence angle, VV has increased sensitivity to certain phenological stages as the incidence angle increases. Additionally, a periodic oscillation on a sub-daily scale is observed when creating coherence time series with increasing temporal baseline. Factors which strongly contribute to these oscillations are the daily cycles of temperature, soil moisture and vegetation water dynamics.

Self‐Powered Luminescent Solar Concentrators‐Integrated Temperature Detection System with High Thermal Tolerance by Reversible Thermal Photoluminescence Luminophores

AbstractIt is still a challenge to prepare the red‐emissive perovskite‐polymer composite with high photoluminescence quantum yield (PLQY) and reversible thermal photoluminescence (RTPL), which is key for improving the thermal tolerance of luminescent solar concentrators (LSCs). In this work, the red‐emissive (661 nm) CsPb(Br0.25I0.75)3‐PMMA composite with high PLQY of 85.96% and favorable RTPL below 160 °C is reported via a strategy of the defect passivation by halide ligand additives. The composite film possesses excellent long‐term stability in air, water, and high temperature environments. Then, a self‐powered temperature detection system, which consists of LSCs and a temperature detection module based on the RTPL composite film, is fabricated. On one hand, RTPL composite makes LSCs of superior thermal tolerance even after 100 cycles of temperature between room temperature and 160 °C. On the other hand, RTPL composite in the opaque box of the temperature detection module can give rise to the signal light without the interference of ambient light. As a result, the self‐powered temperature detection system achieves the quantitative temperature data display at different environment lights for 24 h in a day.

The potential for an increasing threat of unseasonal temperature cycles to dormant plants.

Two functional responses largely guide woody plants' survival to winter conditions: cold hardiness and dormancy. Dormancy affects budbreak timing based on chill accumulation. Effects of warming on dormancy may appear time-shifted: fall and winter warming events decrease chill accumulation, delaying budbreak observed in spring. The same warming events also affect cold hardiness dynamics, having immediate implications. As cold deacclimation rates increase with dormancy progression, the same amount of warming has greater damage risk the later it occurs in the season, depending on return of low temperatures. Should frequency of erratic weather increase with climate change, more instances of risk are expected. However, understanding how plants fare through seasons now and in future climates still requires better knowledge of winter physiology.

Rhythms in lipid droplet content driven by a metabolic oscillator are conserved throughout evolution

The biological clock in eukaryotes controls daily rhythms in physiology and behavior. It displays a complex organization that involves the molecular transcriptional clock and the redox oscillator which may coordinately work to control cellular rhythms. The redox oscillator has emerged very early in evolution in adaptation to the environmental changes in O2 levels and has been shown to regulate daily rhythms in glycerolipid (GL) metabolism in different eukaryotic cells. GLs are key components of lipid droplets (LDs), intracellular storage organelles, present in all living organisms, and essential for energy and lipid homeostasis regulation and survival; however, the cell bioenergetics status is not constant across time and depends on energy demands. Thus, the formation and degradation of LDs may reflect a time-dependent process following energy requirements. This work investigated the presence of metabolic rhythms in LD content along evolution by studying prokaryotic and eukaryotic cells and organisms. We found sustained temporal oscillations in LD content in Pseudomonas aeruginosa bacteria and Caenorhabditis elegans synchronized by temperature cycles, in serum-shock synchronized human embryonic kidney cells (HEK 293 cells) and brain tumor cells (T98G and GL26) after a dexamethasone pulse. Moreover, in synchronized T98G cells, LD oscillations were altered by glycogen synthase kinase-3 (GSK-3) inhibition that affects the cytosolic activity of the metabolic oscillator or by knocking down LIPIN-1, a key GL synthesizing enzyme. Overall, our findings reveal the existence of metabolic oscillations in terms of LD content highly conserved across evolutionary scales notwithstanding variations in complexity, regulation, and cell organization.Graphical abstract

Quantifying the main and interactive effects of the dominant factors on the diurnal cycles of land surface temperature in typical urban functional zones

The urban heat island (UHI) effect exists both during daytime and nighttime and varies with urban characteristics, such as 2D/3D urban morphology and socio-economics. However, there is a lack of quantitative understanding of the roles of these characteristics in influencing land surface temperature (LST) variations in different urban functional zones (UFZs) throughout the diurnal cycle. In this study, we examined the responses of diurnal LSTs in different UFZs to 2D/3D urban morphology and socio-economic variables. Results showed the following: (1) During daytime, the main drivers of LST varied with not only the UFZs but also the observation times; during nighttime, the LST variations across different UFZs were largely controlled by 3D urban morphology and socio-economic factors. (2) At 10:37, LST declined most rapidly when the percentage of tree cover (PER_Tree) exceeded a certain threshold. The threshold values of PER_Tree were 85%, 70%, 50%, and 60% for the residential, industrial, commercial, and public service zones, respectively. Irrespective of the UFZs, a nighttime cooling effect occurred only when sky view factor (SVF) exceeded 0.8. (3) For locations with high population density (Pop_Den) in the residential zone, whether urban trees induced a cooling effect depended on both the observation time and PER_Tree during daytime; however, a higher SVF tended to result in an increased LST during nighttime. In the public service zone, when Pop_Den exceeded 50, urban trees with high height contributed to nighttime LST cooling, whereas a warming effect occurred with trees with low height. The direct implications of this study suggest that 3D urban morphology and socio-economics are more efficient mitigation strategies for all UFZs at night, and the interactive effects between the dominant drivers of diurnal LSTs should be considered to cool the city most effectively.