Autotransplantation Of Teeth Research Articles

Periodontal status after autologous tooth transplantation (ATT) of premolars and wisdom teeth.

This study explored the clinical and radiological outcomes after autologous premolar and wisdom tooth transplantation, with a focus on periodontal status. A systematic search was conducted using all relevant databases up to April 5, 2024. The inclusion criteria were as follows: a) human participants, b) a sample size of at least five autotransplanted teeth, c) molar or premolar transplants, d) English language use, and e) at least 1 year of follow-up. The following parameters were assessed: probing pocket depth, recession, tooth mobility, ankylosis, bone level, and tooth loss. Our search identified 466 records, and after our selection process, 25 articles were suitable for analysis, with a total of 3732 teeth (569 premolars and 350 molars) with a mean follow-up duration of 6.1 years. The 10-year survival rate of autologous tooth transplants ranged from 33.8% to 100%, and the mean complication rates of root resorption and ankylosis were 8.9% (13 studies) and 14.0% (10 studies), respectively. Periodontal complications such as periradicular radiolucency, periodontal defects, and attachment loss occurred in less than 10% of patients. The premolars exhibited superior clinical and radiological outcomes compared with the molars. In conclusion, the survival rate and periodontal status after autologous tooth transplantation (ATT) of premolars and molars were consistent with those of traditional dental implants. Therefore, autotransplantation may be considered in cases where dental implants are indicated. As specific reports on periodontal complications are scarce, further research is warranted to identify the specific factors associated with periodontal complications in autologous transplant recipients.

A New Approach for Analyzing Root Development in Autogenous Tooth Transplants Using Computed Tomography.

The aim of this study was to evaluate root development in autotransplanted teeth using cone-beam computed tomography (CBCT) images. Twelve premolars with incomplete root formation, which were selected to replace prematurely lost upper central incisors, were analyzed by CBCT on two different occasions. The first CBCT examination (T1) was conducted before tooth autotransplantation. The second CBCT examination (T2) was performed over a follow-up period of at least 12 months and < 5 years. Three previously calibrated evaluators assessed root development. The positions of the tomographic planes were standardized. The mean root length in sagittal and coronal tomographic sections was used to validate the root length at T1 and T2. Longitudinal root development of the transplanted tooth was determined by calculating the difference in root length between T2 and T1. The intraclass correlation coefficient (ICC), paired t-test, and Pearson test were applied, with significance set at 5%. The mean time elapsed between T1 and T2 was 962 days/2.6 years. The ICC was > 0.75. The measurements obtained at T2 were significantly greater than at T1 (p = 0.001). The mean increase in root length was 2.83 mm. There was no significant correlation (p = 0.413; r = 0.261) between root length increase and the time elapsed between T1 and T2. Premolar teeth with incompletely formed roots transplanted to the upper central incisor region showed continued root development during postoperative follow-up.

"In Their Own Words": Families' Experiences With Tooth Autotransplantation for the Replacement of Maxillary Incisors in Children.

To examine families' experiences, including motivation and barriers to undergoing tooth autotransplantation (AT), and their perceptions of associated esthetic and functional outcomes. Semi-structured, in-depth-interviews (IDIs) were conducted in person with families who had children that underwent the AT procedure. Interviews were audio recorded and transcribed. Transcripts were coded and thematically analyzed both deductively and inductively. A facilitatorsand barriers matrix and journey maps were created to draw inferences on patterns arising from main themes. Twenty families selecting AT as a solution for a missing maxillary incisor were recruited and interviewed. Overall, all families interviewed had a positive experience with the AT procedure. Motivating factors for undergoing the AT procedure included wanting an earlier intervention for the missing incisor, wishing to mitigate negative psychosocial effects, and the anticipated positive outcomes that would last into adulthood. Barriers to uptake of the AT procedure included the lack of dental practitioner awareness of AT as a potential solution and a large number of appointments and travel. Families were also initially concerned over potential complications that could arise from their child undergoing this procedure. The cost of the procedure was both a barrier and a facilitator for treatment. The study results demonstrate that the overall AT is favorably considered by the families of growing children for the replacement of maxillary incisors and highlight factors that may act as motivators or barriers to its uptake.

Využití 3D tisku při autotransplantaci moláru – kazuistika

The aim of this study is to show the experience with autotransplanted 3D model development and its use during surgery. The development of a 3D model has undergone three phases: building the virtual model, 3D printing and finally sterilisation. A 37-year-old female patient was recommended to our department for treatment of the 2nd quadrant. After planning the extraction of 26, 27 and consequently autotransplantation of tooth 28 was decided. According to CBCT data, two 3D models of the autotransplanted tooth were built and plasma sterilisation was done. After extraction of 26 and 27, a tooth cavity was prepared for the 3D model phantom and the autotransplantation was finished; extra alveolar time of tooth 28 was only 21 seconds. Healing period had no adverse problems and the patient was very satisfied with the result. Autotransplantation is one of the possible choices when treating malformation or tooth loss. The use of a 3D phantom during surgery leads to shortening of surgery time, thus lowering the risk of periodontal tissue damage by repeated testing of the right size of the tooth position and size.

Enucleation of a unicystic ameloblastoma associated with tooth autotransplantation

Enucleation of a unicystic ameloblastoma associated with tooth autotransplantation

Development and validation of a robotic system for milling individualized jawbone cavities in oral and maxillofacial surgery

ObjectivesThis study aimed to develop and validate a robotic system capable of performing accurate and minimally invasive jawbone milling procedures in oral and maxillofacial surgery. MethodsThe robotic hardware system mainly includes a UR5E arm (Universal Robots, Denmark) and the binocular positioning system (FusionTrack 250, Atracsys LLC, Switzerland). The robotic software (Dental Navi 3.0.0, Yakebot Technology Ltd., China) is capable of generating cutting tool paths based on three-dimensional shape description files, typically in the stereolithography format, and selected cutting tool parameters, as well as designing surgical accessories. Fully impacted supernumerary tooth models in the maxilla were fabricated using software and three-dimensional printing. Following the planning of a customized cavity to fully expose the tooth, maxillary bone milling was performed on both the robot and static guide groups (n = 8). After milling, all models underwent scanning for assessment. ResultsIn the experiment with fully buried supernumerary tooth models in the maxilla, the root mean square, translation error, over-removal rate, and maximum distance were significantly smaller in the robot group compared to the static guide group. Moreover, the overlap ratio and Dice coefficient were significantly greater in the robot group. No statistically significant differences were observed between the two groups in terms of the rotation error (P = 0.80) or under-removal rate (P = 0.92). ConclusionsThis study has developed a robotic system for milling individualized jawbone cavities in oral and maxillofacial surgery, and its accuracy has been preliminarily verified to meet clinical requirements. Clinical significanceThe robotic system can achieve precise, minimally invasive, individualized jawbone milling in a variety of oral and maxillofacial surgeries, including tooth autotransplantation, surgical reshaping for zygomatic fibrous dysplasia, removal of fully impacted supernumerary or impacted teeth, and endodontic microsurgery, among other relevant clinical applications.

Digital Simulation and Designing of a Novel Osteotomy Guide for Autotransplantation in the Anterior Region.

Autotransplantation of teeth (ATT) is a viable treatment option for replacing teeth lost due to various reasons. Periodontal ligament (PDL) on the donor tooth is one of the most crucial factors determining the success of ATT. To preserve the PDL during surgery and improve the success rate of ATT, digital dentistry has been applied to ATT. In this article, a digital workflow including surgical simulation, a three-dimensional (3D) replica fabrication, and a novel osteotomy guide design is introduced. Digital simulation of ATT on a patient's integrated model enables visualization of anatomical structures and the 3D position of the donor tooth prior to the actual surgery. The 3D-printed osteotomy guide allows the transfer of the direction and depth of the planned osteotomy into the intraoral environment. The 3D replica helps prepare the recipient site before the actual transplantation, which minimizes the extra-alveolar time of the donor tooth and decreases trauma during the try-in process. The proposed virtual planning and the use of the guide and the 3D replica can facilitate the surgical procedures while minimizing complications.

From Concept to Clinical Practice: A Review of Autotransplantation Techniques and Their Impact on Dentistry.

The goal of autotransplantation of teeth (ATT) is to provide the patient with a functioning tooth to replace a missing one. In dentistry, this surgery has gained significant approval and popularity; nonetheless, there is still a shortage of thorough evidence about its long-term effects. Tooth transplantation has a rich historical pedigree, and the main factors determining its success are the extra-alveolar period, proper splinting, periodontal ligament treatment, and root growth stage. With its high reported survival rate, autotransplantation is a potential therapeutic option, especially when it comes to replacing damaged anterior maxillary teeth. Collaboration between orthodontists, pediatric dentists, restorative dentists, and oral and maxillofacial surgeons is necessary for the successful execution of this treatment. The extra-alveolar period, proper splinting, periodontal ligament treatment, and the stage of root growth are the main factors that determine success. Although there are many applications for autotransplantation, a good functional and cosmetic result depends on careful patient selection and a proper surgical approach. It is not practical to replace lost teeth in children and teenagers with bridgework or implants as this may interfere with the proper development of the alveolar process and other facial bones. As such, these techniques are not recommended. Alternatively, implanting a tooth from the same person without fully forming its roots might be a good substitute. This method promotes improved mastication, speech, dentofacial development, aesthetics, and arch form integrity by enabling unhindered alveolar growth and root development. Although tooth autotransplantation has not been widely used in clinical dentistry, it is currently seen as a viable option that can replace traditional prosthetics and implant rehabilitation in both financialand medical terms. This review examines several benefits, possible iatrogenic harms, side effects, and important variables that might affect the result of the transplant, in addition to suitable criteria for the best-case selection. It also offers recommendations based on the literature.

Stereolithography (STL) model in dental autotransplant: A case report

The goal of this case report was to describe the use of the stereolithography (STL) model in dental autotransplantation. This report described autotransplantation of the lower wisdom tooth (48) to replace a missing lower first molar (46) due to caries. This approach used an STL model of 48 fabricated in the laboratory from cone-beam computed tomography (CBCT) images to assist in recipient site preparation before autotransplant. In conclusion, the use of the STL model could potentially increase the success rate of autotransplantation as it can help to preserve the periodontal ligament (PDL) cells on the root surface of the donor tooth, shorten the extraoral time of the donor tooth, and provide optimum contact between the recipient bone and the root surface of the transplanted tooth.

Dental Autotransplantation or Immediate Single Implant for the Replacement of a Hopeless Molar: A Comparative Case Series Study.

Dental autotransplantation (ATT) of mature teeth in adult patients has recently been supported by a growing body of evidence. Thus, ATT can be considered as an alternative to single implants for the replacement of a compromised tooth. This case series study aims to provide an initial comparison between ATT (test group) and immediate implant treatment (IIT standard group), in terms of volumetric changes and patient-related outcome measures (PROMs). Thirty-one interventions (29 patients) were grouped into two similar cohorts. Measurements were made on the superimposed STL files before and at least six months after treatment, and PROMs were obtained from a questionnaire in two follow-up checks. Data were analyzed using descriptive and inferential statistics. Adverse events and complications were also recorded. Volume reduction was 3 to 4 times less in the ATT group than in the ITT group (p<0.05). Patients in the ATT group reported higher levels of perceived inflammation than the IIT group (p&#61;0.015), although patients rated satisfaction similarly between the two treatments, above 9 on a scale of 1-10. Although this research should be considered an initial step requiring larger samples and follow-up, it supports the trend of including ATT as an alternative option to IIT in molar replacement.

Tooth autotransplantation and resin composite reshaping as a multidisciplinary approach for treating dental agenesia: A 10-year follow-up.

This case report describes the multidisciplinary approach performed in a 9-year-old male patient with dental agenesia affecting teeth 21 and 22. Autotransplantation of the right upper second premolar with incomplete rhizogenesis to the missing area was combined with coronary reshaping with resin composite and orthodontic therapy. The treatment began with the extraction of the deciduous upper left central incisor, bone preparation for the recipient site of the donor tooth, atraumatic extraction of the right upper second premolar and immediate autotransplantation in the surgically prepared recipient site. Subsequently, sutures to reposition the flap and a rigid splint were performed. After 12 months, coronary reshaping of the autotransplanted tooth with resin composite was carried out. Orthodontic treatment involving the use of a fixed appliance was used to correct the interdental spaces and achieve adequate occlusion. Clinical and radiographic follow-up 10 years after tooth autotransplantation and 9 years after reshaping revealed partial obliteration of the pulp chamber, root resorption, ankylosis and the presence of endodontic treatment. The long-term outcomes highlighted that tooth autotransplantation represents a biologically and cost-effective procedure for replacing missing teeth in young patients, particularly in cases of incomplete rhizogenesis of the autotransplanted tooth. This case report discusses tooth autotransplantation and resin composite reshaping as viable and long-term clinical options for treating young patients with dental agenesis.

Tooth Autotransplantation using Surgical Guides and a Printed Donor Tooth Replica

Tooth Autotransplantation using Surgical Guides and a Printed Donor Tooth Replica

Knowledge, attitudes, and practices among patients with combined dentition defect and non-functional impacted teeth toward tooth autotransplantation

BackgroundTooth autotransplantation (TAT) is a surgical procedure involving the extraction of a tooth from one location and its subsequent transplantation into another alveolar socket within the same individual. This innovative treatment approach holds significant promise. Nonetheless, the potential recipients exhibit a limited level of awareness and understanding of this procedure. This study investigated the knowledge, attitudes, and practices (KAP) among patients with combined dentition defects and non-functional impacted teeth toward TAT.MethodsThis web-based cross-sectional study was conducted between December 2022 and February 2023 at one hospital. A self-designed questionnaire was developed to collect demographic information of the patients and assess their knowledge, attitudes, and practices toward TAT.ResultsA total of 533 valid questionnaires were collected. The mean knowledge, attitude, and practice scores were 5.55 ± 2.38 (possible range: 0–10), 26.82 ± 2.46 (possible range, 8–40), and 27.45 ± 7.40 (possible range, 9–45), respectively.ConclusionThe participants had insufficient knowledge, negative attitudes, and passive practices toward TAT. Targeted interventions should be implemented to improve the understanding and practice of TAT among patients with dentition defects.

Tooth Autotransplantation, Autogenous Dentin Graft, and Growth Factors Application: A Method for Preserving the Alveolar Ridge in Cases of Severe Infraocclusion-A Case Report and Literature Review.

Background: Tooth infraocclusion is a process in which a completely or partially erupted tooth gradually moves away from the occlusal plane. Submerged teeth can lead to serious complications. Treating teeth with infraocclusion is very challenging. One of the procedures allowing for the replacement of a missing tooth is autotransplantation. The aim of this paper is to review the literature on teeth autotransplantation, supported by a case report involving the autotransplantation of a third mandibular molar into the site of an extracted infraoccluded first mandibular molar, as well as the utilization of advanced platelet-rich fibrin (A-PRF) alongside autogenous dentin grafts for bone tissue regeneration. Methods: A severely infraoccluded first permanent right mandibular molar was extracted and then ground to obtain the dentin graft. A-PRF clots (collected from the patient's peripheral blood) were added to the autogenous dentin graft, to create the A-PRF membrane. An atraumatic extraction of the lower left third molar was performed and then it was transplanted into the socket of tooth no. 46. Immediately after transplantation, tooth no. 38 was stabilized with orthodontic bracket splints for 3 months. The patient attended regular follow-up visits within 12 months. Results: After one year, the patient did not report any pain. In the clinical examination, the tooth and surrounding tissues did not show any signs of infection. However, radiographically, cervical inflammatory resorption, unchanged pulp canal dimensions, absent root growth, periapical radiolucency, and lack of apical and marginal healing were observed. Reconstruction of the bone defect was obtained and the alveolar ridge of the mandible was preserved. Due to poor stability of the tooth and severe resorption, the tooth needed to be extracted. Conclusions: This study is designed to critically evaluate the efficacy of autotransplantation, the application of growth factors, and the integration of autogenous dentin grafts in remedying dental deficiencies resulting from reinclusion. We aim to point out the possible causes of treatment failure.

Multiple Autotransplantation of Teeth in a Young Individual

The tooth autotransplantation is currently considered as a reliable method of replacing a lost tooth, especially in young individuals. In these persons, due to skeletal growth, conventional dental implants cannot be used, which have a negative impact on the growth of the alveolus and jaw at the anchorage. In contrast, the use of own teeth allows uninterrupted growth of both the alveolus and the jaw, and the fully integrated autograft behaves similarly to a naturally grown tooth in that location. This case report shows the use of autotransplantation for upper canine retention and subsequent replacement of the upper molar with a lower molar.

Tooth autotransplantation with adjunctive application of enamel matrix derivatives using a digital workflow: A prospective case series

ObjectivesDigital protocols and bioactive materials may reduce complications and improve tooth autotransplantation (ATT) success and survival rates. This prospective study assesses the performance of a fully digital autotransplantation protocol of close-apex molars with the adjunctive application of Enamel Matrix Derivatives (EMD). MethodsTwelve adult patients with 13 hopeless molar teeth were replaced with autotransplantation of closed apex third molars. Outcomes, including success and survival rates, clinical, endodontic, radiographic, patient-reported outcome measures (PROMs), and digital image assessments, were conducted over a two-year follow-up period. ResultsSurvival and success rates were 100% and 91.2%, respectively, with no progressive inflammatory or replacement root resorption (ankylosis) except for one tooth presenting radiographic furcation involvement. A significant probing depth reduction of 2.4 ± 2.58 mm and CAL gains of 2.8 ± 3.03 mm were observed in transplanted teeth compared to the hopeless receptor teeth. Radiographic bone levels remained stable throughout the study period (-0.37 ± 0.66 mm), and digital image assessments showed minimal alveolar ridge width changes (-0.32 to -0.7 mm) and gingival margin changes (-0.95 to -1.27 mm) from baseline to last visit. PROMs indicated very high patient satisfaction. ConclusionThe use of a digital ATT protocol with adjunctive use of EMD in closed-apex third molars demonstrated promising short-term high success and survival rates. Additionally, this type of therapy adequately preserves the dimensions of the alveolar ridge in the receptor site. Clinical significanceThis is the first prospective clinical study examining the effect of a digital tooth autotransplantation protocol combined with the application of EMD. It demonstrates that this approach is an effective treatment for replacing hopeless teeth and also validates the digital assessment of ATT alveolar ridge preservation at the recipient site.

Combined application of artificial bone powders and concentrated growth factor membranes on the autotransplantation of mature third molars: A 5-year retrospective case series.

This study aimed to observe the efficacy and outcomes of the combined application of artificial bone powder and concentrated growth factor (CGF) membranes for tooth transplantation in cases with wide recipient sockets and small donor teeth. A total of 36 teeth from 36 patients with wide recipient sockets and small donor teeth were enrolled. Autogenous tooth transplantation was performed using bone powders and CGF membranes. After transplantation, the visual analog scale (VAS) score, Landry Wound Healing Index, probing depth (PD), mobility, and gray value of the alveolar bone around the transplanted teeth were measured, and a patient satisfaction questionnaire was administered. All patients underwent clinical and radiographic examinations during follow-up. The VAS score of 16 (44.4%) cases after 1 week was 0, and 26 (72.2%) patients showed excellent gingival healing after 2-4 weeks. The PD of a few cases was deeper than 3 mm during the first month; however, returned to normal after 3 months. Although the majority of the transplanted teeth possessed mobility greater than grade I during the first month, the mobility gradually improved within 3 months. The gray value of the alveolar bone around the transplanted teeth, 1 year postoperatively showed no difference with pre-operation (p > .05). During the mean follow-up period of 42.7 months (range 20-72 months), 33 of the 36 transplanted teeth remained insitu without clinical or radiographic complications, with an overall success rate of 91.7%. Although the PD and mobility of the transplanted teeth were not ideal during the early stages of healing, most of the transplanted teeth had good clinical outcomes. In cases with large recipient sites accompanied by small donor teeth, autotransplantation of teeth using artificial bone powder combined with CGF membranes is a viable option and can lead to optimistic results with favorable success rates.

Long-Term Evaluation of Tooth Transplantation: An Umbrella Review.

Aim/Objective: This umbrella review of systematic reviews aims to summarize the available data regarding both success and survival rates of tooth autotransplantation, in addition to analyzing the risk factors that are connected to those rates. Methods: This umbrella review was performed according to the evaluation of various meta-analyses and systematic reviews following AMSTAR2 guidelines. A systematic search of literature on PubMed, Scopus, MEDLINE, EMBASE, and the Cochrane Database. Six systematic reviews were included. Explicit inclusion and exclusion criteria were applied. It is registered in PROSPERO under the registration number (CRD-42023415623). Results: The studies reviewed were written from 2014 to 2018, which extracted the information from various studies spanning from 1968 to 2014. According to the selected studies regarding autotransplanted teeth in humans, they showed the following: A survival rate overall of 87.39% and a success rate overall of 90.29%. These factors were the most common in relation to the success of the autotransplanted teeth: age, gender, and stage of root development. On the other hand, common unfavorable results linked to the transplanted teeth in these studies were failure, ankylosis, and internal root resorption, followed by extraction and hypermobility. Conclusions: The wide body of evidence gathered illustrates that autotransplantation is an operation that dispenses high rates of survival and success. Furthermore, risk factors like root development stage, recipient site, and donor tooth type established a remarkable association with the negative outcomes of the procedure. For successful tooth autotransplantation, patient selection is crucial. Younger patients and those with donor teeth at an optimal stage of root development typically experience better outcomes. Preoperative planning should include comprehensive evaluations and advanced imaging techniques to accurately assess both the donor tooth and the recipient site. Nonetheless, on account of heterogeneity and the quality of the studies included in this investigation, caution should be taken when interpreting the mentioned results.

A digital approach to tooth autotransplantation: a case report

In this article, we present a case report on the autotransplantation of an upper left canine (UL3) into the site of a retained upper left deciduous canine (ULC) in a 36-year-old male using a digital guided approach. The procedure involved meticulous pre-operative planning, careful extraction of the ULC and UL3, and the use of a stereolithic tooth and a surgical guide created using cone beam computed tomography (CBCT) data. Follow-up included endodontic treatment post-transplantation. The successful outcome of this case underscores the importance of how imaging techniques can help to provide successful and predictable autotransplantation results. This case report highlights the successful integration of a transplanted tooth and the unique approach to the techniques used. CPD/Clinical Relevance: Autotransplantation of an impacted tooth can be considerd as a treatment option for the adult patient with a single tooth edentulous space or retained deciduous tooth.

Accuracy assessment between computer-guided surgery planning and actual tooth position during tooth autotransplantation.

This study aims to evaluate the precision and efficacy of utilizing computer-aided design (CAD) in combination with three-dimensional printing technology for tooth transplantation. This study analysed 50 transplanted teeth from 48 patients who underwent tooth transplantation surgery with the aid of CAD and positional guides. A consistent coordinate system was established using preoperative and postoperative cone-beam computed tomography images. Linear displacements and angular deviations were calculated by identifying key regions in both virtual designs and actual transplanted teeth. Additionally, an analysis was conducted to explore potential factors influencing these deviations. The mean cervical deviation, apical deviation, and angular deviation among the 50 transplanted teeth were 1.16 ± 0.57 mm, 1.80 ± 0.94 mm, and 6.82 ± 3.14°, respectively. Cervical deviation was significantly smaller than apical deviation. No significant difference in deviation was observed among different recipient socket locations, holding true for both single-root, and multi-root teeth. However, a significant difference was noted in apical deviation between single-root and multi-root teeth. Our analysis identified a correlation between apical deviation and root length, leading to the development of a prediction model: Apical deviation = 0.1390 × (root length) + 0.2791. The postoperative position of the donor teeth shows discrepancies compared to preoperative simulation when utilizing CAD and 3D printed templates during autotransplantation procedures. Continual refinement of preoperative design is a crucial endeavour.