Tectonic Processes Research Articles

Stratigraphic and structural evidence of transpressional Quaternary fault reactivation along the SE Korean Peninsula

Comprehending the nature, extent, and distribution of seismogenic structures, along with their seismogenic potential to induce destructive earthquakes in low seismic strain regions, holds significant socio-economic significance. Analyzing historical and paleoearthquakes becomes essential to understanding the influencing factors controlling the origin of earthquakes in intraplate regions, such as the Korean Peninsula. Based on current knowledge, the seismic pattern within the intraplate region, particularly along the Korean Peninsula, exhibits greater heterogeneity. This observation is drawn from historical seismic records, instrumentally detected seismic patterns, and paleoseismological analyses. Comprehensive paleoseismological studies play a crucial role in providing new evidence for fault activity, and hence they are an important contribution to the understanding of the seismic and structural evolution of faults. Existing paleoseismic investigations have predominantly focused on southeastern Korea, primarily along the Yangsan or Ulsan faults, with less attention given to other faults in the southeastern part of the Korean Peninsula. In the ongoing Korean Active Fault Mapping Project, this study specifically identifies a fault trace approximately 5.5–7 km long along the Ulsan-Dongnae Fault system named as Seokgye fault, named after the locality. Detailed paleoseismic investigations were carried out along the Seokgye fault. The fault presents a clear example of fault reactivation under the present compressional tectonic setting with a paleoearthquake during the late Pleistocene (∼121 ± 6 ka). Based on the length of the fault traced and observed displacement in the trench, Seokgye fault is capable of generating an earthquake of magnitude similar to the 2016 Gyeongju earthquake (Mw 5.8). This research enhances our understanding of the ongoing tectonic processes and Quaternary activities of fault systems in the southeastern Korean peninsula. Additionally, it contributes valuable insights for local-scale seismic hazard analysis in the area.

Tectonic and climatic significance of Oligocene-Miocene eolian sandstones in the Andean foreland basin of Argentina

Late Oligocene-early Miocene aridification in the retroarc foreland basin adjacent to the southern central Andes was recorded by widespread eolian conditions that coincided with accelerated subsidence driven by the main phase of Andean tectonic loading. An extensive eolian dune system, which is rare in most foreland basins, indicates specific conditions in terms of climate (aridity), atmospheric circulation, orography, sediment sources, dispersal patterns, and accommodation space. Detrital zircon U-Pb geochronological results for eolian sandstones spanning 20 foreland localities in northwestern to west-central Argentina, from 22°S to 36°S, reveal relatively localized Andean sources rather than regional cratonic provenance. Clastic detritus was largely derived from Phanerozoic igneous and sedimentary rocks of the Andean magmatic arc and retroarc fold-thrust belt during initial shortening-induced uplift of hinterland regions such as the Western Cordillera, Principal Cordillera, and Frontal Cordillera. This provenance record provides the earliest evidence for major westerly winds, transporting Andean detritus broadly eastward to the foreland basin (with common axial northward deflections) during a climate shift marked by the latest Oligocene-earliest Miocene inception of arid conditions. In addition to the climatic implications, independent stratigraphic data provide the basis for a compilation of sediment accumulation histories showing that eolian deposition was synchronous with accelerated subsidence attributable to enhanced Andean shortening. We propose that accelerated Andean uplift in the latest Oligocene-early Miocene generated rain-shadow conditions contemporaneous with increased sediment accommodation in the foreland basin, underscoring the important influence of tectonic processes on regional climate.

Variations of the effective elastic thickness evidence for a wide diffusive boundary between the North American and Eurasian plates in Siberia

Northeastern Eurasia is one of the least explored regions in the world. Very little geophysical data is available for this inaccessible area. Even the exact location of the plate boundary between Eurasia and North America remains a subject of ongoing debate. The effective elastic thickness (EET) of the lithosphere is a proxy for lithospheric strength and can provide insight into the thermal regime and tectonic processes. We have computed a high-resolution map of the EET for northeastern Eurasia using the fan wavelet coherence technique applied to the Bouguer gravity anomalies and topography/bathymetry data, appropriately adjusted to account for the influence of density variations within sediments. The results obtained provide insights into different tectonic regimes within this predominantly understudied region. In particular, we identify the boundary between the Eurasian and North American plates in Siberia as a rheologically weak diffusive zone extending from the Verkhoyansk and Sette-Daban Ranges to the eastern boundary of the Chersky Range. Unlike the Sette-Daban and Verkhoyansk Ranges, which were formed by plate collision and have an EET of 30–50 km, other mountainous regions have much lower EET values, usually less than 15 km. These areas have recently experienced tectonic activity that has weakened the lithosphere.

Metamorphic evolution of high-pressure and ultrahigh-temperature granulites from the Alxa Block, North China Craton: Implications for the collision and exhumation of Paleoproterozoic orogenic belts

High-pressure (HP) and ultrahigh-temperature (UHT) granulites with a high geothermal gradient (greater than 500 °C/GPa) are prominent features of Paleoproterozoic orogenic belts and may represent paired metamorphic belts present during the early stages of plate tectonics. Understanding their pressure−temperature−time (P-T-t) paths and metamorphic evolutionary relationships could provide valuable constraints on the tectonic processes of Paleoproterozoic orogenic belts. Here, we describe garnet mafic and clinopyroxene-orthopyroxene (Cpx-Opx) granulites from the Diebusige area of the Alxa Block in the western part of the Khondalite Belt, North China Craton. Through detailed petrographic, phase equilibrium modeling, and Ti-in-amphibole thermometric studies, we obtained the preserved peak mineral assemblages of two types of mafic granulites: garnet + clinopyroxene + amphibole + plagioclase + quartz + ilmenite, and clinopyroxene + orthopyroxene + plagioclase + amphibole + garnet (rare) + ilmenite. The preserved peak P-T conditions were determined to be 850−890 °C/11.4−13.2 kbar (HP granulite-facies) and 950−970 °C/8.2−9.2 kbar (UHT conditions), with thermal gradients of ∼70 °C/kbar (moderate differential temperature/differential pressure, dT/dP) and ∼110 °C/kbar (high dT/dP), respectively. Using sensitive high-resolution ion microprobe U-Pb dating and rare earth element analysis of zircons, we found that the garnet mafic granulite recorded an HP granulite-facies metamorphic age of ca. 1.95 Ga and a retrograde cooling age of ca. 1.8 Ga, while the Cpx-Opx granulite recorded a consistent retrograde cooling age of ca. 1.8 Ga. By combining these results with the metamorphic evolution and timing (ca. 1.92−1.91 Ga) of UHT rocks from the Khondalite Belt, we suggest that the garnet (HP) mafic and Cpx-Opx (UHT) granulites may represent different stages of the same metamorphic event, shedding light on the processes involved in the collision and subsequent exhumation of Paleoproterozoic orogenic belts.

Tectonics or rebound: Pleistocene fault reactivation in the highest mountains of the Carpathians

The steep morphology, highest elevation within the Carpathians, and distinct fault borders of the Tatra Mts. support the assumption of recent tectonic activity. However, for decades, the Quaternary tectonic activity of the Tatra Mts. has been poorly evidenced, and a late Pleistocene fault rupture was discovered recently. Using the protected environment of the caves, we have utilized 230Th/U dating of damaged speleothems to extend the record of Quaternary deformation of the Tatra Mts. up to 0.5 Ma. The results from ten caves reveal five periods of increased activity at 465–332, 280–260, 204.8–188.8, 127–86.6, and 29.5–10.11 ka ago. Three mechanisms of fault reactivation were identified through paleostress analysis of cave passage offsets: (1) gravitational sliding; (2) NNE–SSW transpression, likely associated with the Alps–Carpathians–Pannonian (ALCAPA) NNE motion; and (3) tectonic-driven SE-trending compression that reactivated the strike–slip and the gently dipping oblique lower-order faults. The geochronological data indicate that these three stress regimes operated during the late Pleistocene; however, our fault-slip data do not allow us to identify the dominant process. Herein, we suggest that the fault slip was caused by the isostatic response of the Tatra block to the unloading of mountain glaciers, coupled with sediment evacuation overlapping with regional-scale tectonic processes. These processes are locally obliterated by debuttressing. We also show that the distances between the caves and possible seismic sources (i.e., the Sub-Tatric and Ružbachy faults) are sufficiently short to break speleothems in response to oscillation. Given that for most caves an earthquake of >Mw6.5 would be destructive, it seems co-seismic deformations in caves are highly likely considering the Mw > 7 potential of the Sub-Tatric Fault.

CAUSES OF CONTINENTAL LITHOSPHERE DELAMINATION BENEATH THE ARABIAN-EURASIAN AND TIEN-SHAN (KYRGYZSTAN) COLLISION ZONES

The mantle processes occurring in collisional zones give rise to the occurrence of many tectonic and geodynamic processes on the surface which is associated with a high seismicity level. Seismic tomography studies showed that beneath some collision zones, such as for example, the Arabian-Eurasian and Tien-Shan, the mantle part of the continental lithosphere delaminates from the crust, with a further separation and plunge into the mantle which is also called delamination. This paper deals with a comparative analysis of the earlier obtained different-scale 3D models for seismic tomography of the crust and mantle of the Arabian-Eurasian and Tien-Shan collision zones to identify similarities and differences between the inhomogeneities observed. The paper also provides a review of the numerical modeling studies. A comparative analysis of seismotomographic models in combination with the results of mathematical modeling and the data on tectonic evolution allows making speculations about the causes of delamination in the studied regions.

Differential surface uplift and knickpoint evolution along the transient Teesta river in the eastern Himalayas

Tectonic and erosional processes that contribute to the gradual process of topographic uplift and erosion have shaped the Himalayan terrain. We used geomorphic proxies and previous published rates of erosion and exhumation across the Teesta River catchment to model the presence of transient segments. This helped us understand how the regional landscape has been changing over time due to surface uplift and channel incision. The Celerity model has been used to evaluate the knickpoint distribution and headward migration along the river system. Based on the river profile and Chi-(χ) analysis, the observed major knickpoints at about ∼ 2500–4000 m elevation comprise the fluvial erosion process, while higher elevation knickpoints suggest the glacial process. The strong significance of the model is shown by the observed correlation coefficient of 0.94 between the predicted and observed horizontal knickpoints. The analysis of relict reach for the paleo-channel reconstruction across the transient drainage channels shows a differential surface uplift of 3823 ± 252 m and 2372 ± 48 m with a corresponding relief gain. The rates of erosion and exhumation were spatially correlated with topographic metrics, precipitation intensity, knickpoint distribution, and surface uplift. The observation suggests that the rate of erosion tends to be more significant and spatially more varied than the long-term rate of exhumation. The rate of exhumation has been found to decline through topographic timescales from south to north, with rates as high as ∼ 1.0 mm/y in the southwest and as low as ∼ 0.4 mm/y in the northernmost Tessta catchment.

Along‐Arc Volcanism in the Western and Central Aleutian From 2015 to 2021 Revealed by Cloud‐Based InSAR Processing

AbstractLeveraging a cloud‐based interferometric synthetic aperture radar time‐series processing framework, we map the surface deformation along the western and central Aleutian volcanoes from 2015 to 2021. The observed crustal deformation from more than 15 volcanoes is attributed to a wide range of magmatic or tectonic processes, for example, magma accumulation in the magmatic reservoir, steady cooling or degassing of magma or hydrothermal systems, and faulting. More vigorous magmatism in the central Aleutian is noticed and appears to be related to higher magma production rates or higher magma ascent rates as a result of oblique subduction. New deformation patterns never observed in previous studies are detected and modeled at Tanaga, Great Sitkin and Yunaska. This study showcases the cloud‐processing capability to generate interferograms at scale and processing tools to analyze these time series over large, tectonically active areas.

Dispersion of sandy sediments during marine–continental transition: An integrated study from the Late Paleozoic western Ordos Basin

The western Ordos Basin is located at the intersection of multiple tectonic units and is a key area in the restoration of the palaeogeographic pattern of the East Asia region. The stability of the area and well-developed Paleozoic strata in the basin provide ideal conditions for revealing the relationships among the tectonic processes apparent there. However, within the constraints of extensive post-depositional modification, poor-quality seismic data, and a lack of wells, sediment dispersion differences, source attribution, and source-to-sink processes are still unclear. In this study, we integrated sedimentology, mineral, and geochemical data obtained from marine, continental, and marine-continental transition sedimentary environments in the study area in order to reveal the evolution from source-to-sink. The results show that the western Ordos Basin was predominantly supplied by the Alxa block, Yinshan orogenic belt, Qilian orogenic belt, and the North Qinling orogenic belt during the Late Paleozoic era. As a result of the closure of the Paleo Asian Ocean, the Alxa block and Yinshan orogenic belt became the primary source areas to the north, being composed of granite and alkaline basalt and some sedimentary rocks. In the southern area, the Qilian and the Northern Qinling orogenic belts were subjected to the PaleoTethys remnant ocean basin subduction during the Early Permian. Granite and alkaline basalt were the source rocks of the North Qinling orogenic belt, which became the source area during the Shanxi period. The Qilian orogenic belt contains some sedimentary rocks. The continuous uplift of the southern and northern orogenic belts. The tectonic setting of the northern source area transitions from a passive continental margin to an active continental margin with a mixture of continental arc. The tectonic setting of the southern source area transitions from a mixture of passive continental margin and active continental margin to an active continental margin and continental island arc. The climate changes gradually from humid to semi-arid and then to arid, and meanwhile, the sea level shows a decreasing trend, leading to an increasing distance of advancement for each source-to-sink system, and gradually converged in the central and eastern regions of the basin. Tidal and fan delta sandy sediments in the study area were transformed into fluvial delta sandy sediments in the northern two source-to-sink systems. The southern source-to-sink systems gradually changed from scattered sandbarrier and coastal sandy sediment to fluvial sandy sediment after the Shanxi Formation.

The Lower Ionosphere and Tectonic Processes on Earth

The Lower Ionosphere and Tectonic Processes on Earth

The onset of Neo-Tethys subduction in the Early Jurassic: evidence from the eclogites of the North Shahrekord Metamorphic Complex (Sanandaj-Sirjan Zone, W Iran)

AbstractGeodynamic models implying subduction of continental crust either consider this process happening during collision, when the continental margin of the lower plate attempts subduction, or in pre-collisional stages, when tectonic erosion of the upper plate or subduction of continental extensional allochthons drag continental crust in the subduction channel. In the Zagros orogen (W Iran), high-pressure rocks are known only from the Sanandaj-Sirjan Zone, NE of the Main Zagros Thrust. Here, eclogites of the North Shahrekord Metamorphic Complex suggest subduction of continental crust slices derived from the upper plate (Central Iran) during the onset of the Neo-Tethys subduction along the southern margin of Iran. Eclogites record a clockwise pressure-temperature-time path, with pre-eclogitic epidote-amphibolites-facies phase assemblages preserved in garnet cores, a high-pressure stage, and a subsequent retrogression at amphibolite-facies conditions. By means of forward thermodynamic modelling and 40Ar/39Ar geochronology, the peak metamorphism has been constrained at 1.9-2.1 GPa and 550-600 °C, in the 191-194 Ma time span. The following retrogression during exhumation lasted at least until 144 Ma. Our data suggest that the onset of the Neo-Tethys subduction traces back prior to 190 Ma, involving together with the Neo-Tethys oceanic lithosphere also slices of the upper plate continental crust scraped off by means of tectonic erosion processes.

Linkage analysis of factors influencing the sustainability of Lake Singkarak in West Sumatra Province, Indonesia

Lake Singkarak, located in the West Sumatra Province, resulted from a tectonic process affected by the Great Sumatran Fault. The lake has a total area of 107 km2 and is used for fisheries, tourism, hydroelectric power plant, etc. However, this lake is facing an array of issues and is even considered in a critical condition. Population growth, land use changes, agriculture development, and climate change are suspected to be the causes. It was also aggravated by the COVID-19 pandemic, wherein lake maintenance was neglected. The lake is a system, therefore maintenance of the lake cannot be performed partially and sporadically but must be integrated and comprehensive. This research analyses factors affecting the lake’s sustainability and the linkage between those factors. This research employed a system thinking approach. There are direct and indirect links between social, economic, and environmental factors, as illustrated in a Causal Loop Diagram. This diagram depicts how economic activities are constrained by available potential, which, at certain thresholds, may result in a drop in lake quality if managed in an unsustainable manner. Additionally, lake management appears to be an important factor in overcoming existing issues and establishing a sustainable lake.

Insights From Layered Anisotropy Beneath Southern New England: From Ancient Tectonism to Present‐Day Mantle Flow

AbstractSeismic anisotropy beneath eastern North America, as expressed in shear wave splitting observations, has been attributed to plate motion‐parallel shear in the asthenosphere, resulting in fast axes aligned with the plate motion. However, deviations of fast axes from plate motion directions are observed near major tectonic boundaries of the Appalachians, indicating contributions from lithospheric anisotropy associated with past tectonic processes. In this study, we conduct anisotropic receiver function (RF) analysis using data from a dense seismic array traversing the New England Appalachians in Connecticut to examine anisotropic layers in the crust and upper mantle and correlate them with past tectonic processes as well as present‐day mantle flow. We use the harmonic decomposition method to separate directionally‐dependent variations of RFs and focus on features with the same harmonic signals observed across multiple stations. Within the crust, there are multiple features that may be correlated with stratification in the Hartford Basin, faults in the Taconic thrust belt, shear zones formed during Salinic/Acadian terrane accretion events, and orogen‐parallel crustal flow in the Acadian orogenic plateau. We apply a Bayesian inversion method to obtain quantitative constraints on the direction and strength of intra‐crustal anisotropy beneath the Hartford Basin. In the upper mantle, we identify a fossil shear zone possibly formed during oblique subduction of Rheic Ocean lithosphere. We also find evidence for a plate motion‐parallel flow zone in the asthenosphere that is likely disturbed by mantle upwelling near the southern margin of the Northern Appalachian Anomaly in the eastern part of the study area.

Analysis of Crustal Movements in the Angren-Almalyk Mining Industrial Area Using GNSS Data

This study aims to investigate the potential of GNSS data in earthquake zoning and risk assessment in a seismically active region. The study area is located in Uzbekistan, where the interaction of several tectonic plates results in frequent earthquakes. The study focused on two periods from October to October of the next year, respectively, for 2018 and 2019, 2019 and 2020 to analyze GNSS velocities and earthquake zoning maps to identify areas at high risk of seismic activity. The study also utilized GIS and spline interpolation to create continuous surface maps of risk zones based on earthquake hazard data. The results showed that the entire study area is at high seismic risk, with a tendency for rotational movement in the zone of intersection of tectonic plates. Velocities range from 1.56-20.3 mm/yr and 1.64-14 mm/yr for the two periods. Moreover, the analysis of vertical earth surface displacements indicates a tendency towards soil subsidence in the western part and uplift in the northeastern part of the study area. The study concludes that GNSS analysis can provide valuable insights into seismic hazard assessment and improve our understanding of the tectonic processes leading to earthquakes.

Lateral changes of crustal extension and passive margin type along the Brazilian southeastern margin

For the last half century, studies based on an increasing, diverse data set, have focused on passive continental margin evolution, as a result of a sequence of tectonic processes that occur in crustal scale and in the geological time. Where extensive subsurface data exists, two distinct endmembers of continental margin architectures were first described along specific margins of the North Atlantic: 1) wide continent-ocean transitions or hyper-extended; 2) narrow continent-ocean transitions or hypo-extended. The lateral transition between these endmember margins, which can occur laterally in short distances, is still not fully understood. The same two endmember margin types are observed across passive margins around the world and notably along the South Atlantic margin. In an area known for controversial interpretations about the crustal nature and the limits of thinned continental crust, this investigation integrates crustal thickness, seismic interpretation, and facies analyses across ∼150,000 km of seismic data along the Brazilian southeastern margin. This study has implications for those investigating the crustal geometry variations for basin analysis and results impact hydrocarbon assessments for the southeastern margin of Brazil. We resume continental margin analyses, in a critical moment as hydrocarbon exploration advances from the continental slope to ultra-deep waters. Results indicate a marked change from a narrow, hypo-extended, sub-aerial, Iceland-like, plume-related volcanic crust in the Pelotas Basin, to a hyper-extended, Iberia-like, magma-rich crust in the Santos Basin, which is separated by a pronounced oceanic transform-fault zone. Dextral movement along this NW-oriented fault zone accommodated differential extensional rates between the hypo- and the hyper-extended margins. Lateral variations in magmatic content within these margin types are interpreted as result from the interaction with mantellic plumes. Margin architecture can locally be affected by pre-existing fault zones and be later modified by oceanic transform faults. The interactions between crustal extensional rates, crustal rheology, mantle underplating, and volcanic material exhumed through mantle-derived plumes, are the key controls for the evolution of continental margins. Tectonic framework classification proposed in this study presents an alternative, original model for continental passive margins evolution.

Jeptha Knob, Kentucky, a probable meteorite impact structure

AbstractJeptha Knob is a deformed structure, 4.5 km in diameter, composed entirely of carbonate rocks in the stable craton of North America. At Jeptha Knob, conventional evidence of meteorite impact, shock metamorphism, has not been found. I used calcite twin analysis to test the hypothesis that Jeptha Knob is a meteorite impact crater. Calcite twinning gives differential stresses of >170 MPa in rocks that were 600 to ≈800 m below the surface when the rocks were deformed. Under these conditions, high differential stresses cannot be explained by tectonic processes. In addition, twin intensities are >150 twins/mm which are >50% higher than the highest twin intensities observed in limestone from a wide variety of tectonic settings. Twin intensities and differential stresses are the same magnitudes as those found at Serpent Mound, a proven impact structure. Consistent with meteorite impact, differential stresses increase toward the center of the structure. If one accepts that Jeptha Knob is a marine impact crater, then (1) the presence of high temperature (>250°C) thick twins in calcite from a resurge deposit; (2) the extensive dolomitization of the central uplift with water/rock ratios >1.0; and (3) two episodes of calcite twin recorded incremental strains, are explained.

Continental‐scale shearing triggered by Oligocene subduction in Myanmar‐Indochina, SE Asia

Continental‐scale shear zones in Indochina record Cenozoic tectonic processes in SE Asia. Previous extrusion models link these shear zones to northward indentation of the Indian continent and conflict with distributed Oligocene conjugate strike‐slip pairs, formed by E‐W‐directed compression (present coordinates). This paper presents evidence of Oligocene shearing along the Mogok Metamorphic Belt in Myanmar, the western boundary of the Indochina block. The Kyanigan quarry at northern Mogok Metamorphic Belt exposes paragneiss, marble and quartzite schist with E‐W striking, which would be dragged from N‐S striking foliations of the main Mogok Metamorphic Belt by right‐lateral shearing of the brittle Sagaing Fault. After restoration, right‐lateral shearing ‘σ’ structures, cored with garnet, in paragneiss in the Kyanigan quarry are consistent with ‘σ’ and ‘δ’ structures in the Moulmein granitic mylonite to the south. U–Pb ages of metamorphic zircon of a sheared paragneiss and a leucogranite, cross‐cutting shear foliation in the Kyanigan quarry, and a biotite 39Ar‐40Ar age of mylonite at Moulmein constrain dextral shearing to 33–25.4 Ma, coeval with other 31–24.5 Ma shear zones in Indochina. The eleven NW‐striking left‐lateral shear zones and N‐S to NE‐striking right‐lateral shear zones define Oligocene conjugate fault patterns in Indochina. After restoration of ~80–45° clockwise rotation, these Oligocene conjugate shear zones, coupled with the anticlinal configuration of the Xuelongshan and Doi Inthanon‐Doi Suthep domes, reflect approximate N–S‐directed shortening. These structures to the north with coeval Myanmar‐Sumatra magmatic arc to the south demonstrate that they correspond to back‐arc contraction during northward subduction of the Indian Ocean. Oligocene continental‐scale intra‐continental shearing may be triggered by syn‐subduction compression in SE Asia.

Competing Roles of Evolving P–T Conditions, Equilibration Volume and Chemical Potential Landscape in the Formation of Corona Texture: a Case Study from the Southern Granulite Terrane, India

Abstract Corona texture is defined by the development of partial or complete rim of one or more minerals around a central reactant mineral depicting limited mass transport (local equilibration) in the length scale of the coronitic layers. The mineral assemblages forming corona texture in a metamorphic rock are commonly used to trace the P-T-X conditions through which the rock evolved during various tectonic processes. However, without a proper assessment of the changes in the equilibration volume (EV) and its effect on the mineralogy, any petrological interpretation deduced from the coronitic texture may be incorrect. In this study, we demonstrate that the double corona texture, observed in a suite of Mg-Al rich ortho-amphibole cordierite-bearing rock from the Cauvery Shear System (Southern Granulite Terrane, India), developed in response to the continuously evolving EV. The studied rock contains aluminosilicate porphyroblasts that are set in a matrix of ortho-amphibole ± quartz. The aluminosilicate porphyroblasts are rimmed successively by an inner symplectic corona of sapphirine + cordierite and an outer mono-mineralic corona of cordierite. Locally, patches of corundum with a rind of cordierite grow preferentially along the interface of aluminosilicate and the inner symplectic corona. Based on detailed petrography and mineral composition analyses, the corona textures are interpreted to have formed through a sequence of different chemical reactions that occurred in local micro-domains. We calculated quantitative P-T pseudosection in a NCFMASHT (Na2O-CaO-FeO-MgO-Al2O3-SiO2-H2O-TiO2) system and activity-adjusted P-T petrogenetic grid in a MASH (MgO-Al2O3-SiO2-H2O) system which, together, suggest that the coronitic assemblages were formed in response to a steeply decompressive retrograde P-T path from >8.8 kbar to <6 kbar, at a nearly constant temperature of ~700°C. Changes in EV in response to the limited transport of chemical components during the formation of corona texture were investigated through isothermal P-μMgO, P-μSiO2 and P-μMgO-μSiO2 MASH diagrams. Our results quantitatively model the continuously changing chemical potential landscape (P-μMgO- μSiO2 evolution path) around the central aluminosilicate porphyroblast within the corona-bearing micro-domain. The path demonstrates that a gradually shrinking EV around the central aluminosilicate during retrogression led to the sequential change of mineral reactions and equilibrium mineral assemblages and resulted in the formation of multiple coronae. Unavailability of fluids and/or rapid exhumation is considered as the most dominant factors responsible for the decreasing elemental mobility and the consequent shrinking in EV in the studied rock.

Modeling the Colatina lineament using geophysical methods: Insights into the geology of ES, Brazil

The study of the primary dikes in a given region is essential for comprehending its geological evolution. This study focuses on the offshore region in the state of Espírito Santo (ES), which encompasses one of the major oil sedimentary basins in the country, namely the Espírito Santo Basin. The study area is considered structurally complex due to the presence of numerous structural features, and the present work focuses on the Colatina Lineament. Despite several decades of oil and rock prospecting studies, the lateral and depth boundaries of the lineament are still unknown. Therefore, this study aims to utilize geophysical methods, including magnetic.and gravity, obtained from aerial and terrestrial surveys, respectively, to characterize the Colatina Lineament structurally. The study generated thematic maps using highlight filters to investigate the structural importance of the zone of influence. Additionally, 2.5D forward modeling was performed from gravity data, revealing numerous geological structures generated by crustal movements. To visualize the geological encompassed by the Colatina Lineament, a 3D inversion of the magnetic data was performed. The outcomes facilitated the visualization and mapping of the dike bundle and confirmed the impact of tectonic processes in the region.

Quaternary stratigraphic architecture of the Pearl River Mouth continental shelf, northern South China Sea: Unraveling stratigraphic imprints of tectonism, paleoceanography, and climate change

The complexity of continental shelf stratigraphy is determined by the interactions among various global or local factors. However, their specific roles are still poorly understood. Using a newly-acquired grid of single-channel seismic reflection profiles, combined with piston cores, shallow boreholes, and industrial wells, this study investigates the sequence stratigraphic architecture and evolution of the Quaternary continental shelf offshore the Pearl River Mouth (PRM), northern South China Sea (SCS). Three types of bounding surfaces have been identified according to their stratal terminations: erosional surfaces (ESs), flat-lying surfaces (FSs), and locally dipping surfaces (LDSs). Given the limited extent of LDSs, we utilized ES/FS couplets to subdivide the upper Quaternary section into six high-frequency sequences (SQ6–SQ1) and their corresponding systems tracts. Within each sequence, regional progradational clinoforms (RPCs) prevail across the entire shelf and are accompanied by downstepping shoreline trajectories, which we interpreted as deposits of falling-stage systems tract. RPCs are interrupted by intercalated sheeted units (ISUs) characterized by high-amplitude and continuous seismic reflections, which may consist of transgressive and lowstand deposits. In younger sequences particularly SQ2 and SQ1, progradational-aggradational clinoforms (PACs) with ascending shoreline trajectories are well developed but confined to the shelf margin, indicating efficient sedimentation during lowstand.Our results revealed significant spatial and temporal variability in stratigraphic architectures of the PRM shelf. Along the SW–NE direction, the stratigraphic pattern changes from progradation to retrogradation and back to progradation, resulting in three sectors with distinct shoreline trajectories. Retreating shoreline trajectories and retrogradational stacking patterns are preferentially present in areas adjacent to the Dongsha Rise, which are jointly influenced by several local factors such as tectonism and intense marine processes. Temporally, a dramatic change in stratigraphic patterns can be observed across a key surface ES4, dated ca. 0.8 Ma. Below ES4, fluvial incisions are scarce and RPCs are overall low-angle and capped with relatively thick ISUs. Also, no lowstand PACs were observed. Above ES4, large-scale incised valley networks appear, together with increased scale and dominance of RPCs and PACs. This stratigraphic imprint is attributed to the Mid-Pleistocene Transition (MPT), which caused a noticeable increase in periodicity, amplitude, and asymmetry of glacio-eustatic cycles. The increased scale of RPCs and PACs after the MPT may reflect increased sediment input due to high denudation rate under intensified monsoon climate.