Wastewater Treatment Technologies Research Articles

Adsorptive removal of phosphate from aqueous solutions using FeCl3‐immobilized melamine‐formaldehyde‐urea resin

AbstractThe surplus phosphorus in aquatic environments trigger eutrophication, an irreversible pollution stage marked by the rapid growth of algae and water plants, a decline in dissolved oxygen levels, and the emergence of dead zones. To address this critical issue, this study focuses on the removal of phosphorus in form of phosphate from aqueous solutions. The research involves the synthesis and characterization of FeCl3‐immobilized melamine‐formaldehyde‐urea resin, an innovative adsorbent, its characterization through Fourier transform infrared spectroscopy, and the evaluation of its adsorption capacity based on Langmuir and Freundlich equilibrium models. The experimental adsorption data fits well with pseudo‐second order kinetic model. Optimal adsorption parameters are carried with batch adsorption technique for 60 min using 0.5 g of adsorbent at pH = 2, achieving 15.55 mg g−1 adsorption capacity, and conducting experiments with tap‐water samples to replicate real‐world scenarios. The research findings have the potential to advance sustainable wastewater treatment technologies and contribute to the mitigation of nutrient pollution in aquatic ecosystems, addressing a pressing environmental concern.

Design, preparation, and performance of different adsorbents based on carboxymethyl chitosan/sodium alginate hydrogel beads for selective adsorption of Cadmium (II) and Chromium (III) metal ions

Developing cost-effective and efficient adsorbents for heavy metals in multicomponent systems is a challenge that needs to be resolved to meet the challenges of wastewater treatment technology. Two adsorbents were synthesized, characterized, and investigated for the removal of Cd2+ and Cr3+ as model heavy metals in their single and binary solutions. The first adsorbent (ACZ) was a nanocomposite formed of O-Carboxymethyl chitosan, sodium alginate, and zeolite. While, the other (ACL) contained ZnFe layered double hydroxides instead of the zeolite phase. Adsorbents were characterized using XRD, FTIR, SEM, and swelling degree analysis. For single heavy metal adsorption isotherms, data for both adsorbents was best fitted and indicated a multilayer adsorption nature. For binary adsorption, Langmuir model with interacting parameters showed the best results compared to other models for both pollutants. For single system, Avrami model was found to be the best model representing the adsorption kinetics data, which indicates that the mechanism of adsorption follows multiple kinetic orders that may change during duration of adsorption process. Numerous interaction mechanisms can occur between the heavy metals and functional groups in the synthesized hydrogels such as NH2, COOH, and OH groups leading to efficient adsorption of metal ions.

Starch-chitosan blends: A comprehensive review on the preparation, physicochemical properties and applications.

Starch and chitosan, polysaccharides derived from natural sources, have significant potential across various domains. Starch is extracted from starch-bearing plants, such as potatoes, whereas chitosan is obtained from the exoskeletons of marine animals, fungi and insects. However, the original forms of starch and chitosan have several limitations, such as low solubility and weak mechanical strength. Interestingly, the combined effects of starch and chitosan resulted in the development of starch-chitosan blends with markedly improved functional properties. These blends demonstrated high tensile strength, improved hydrophilicity and increased adsorption capacity. Furthermore, modification of starch-chitosan blends by techniques such as crosslinking and incorporation of other functional materials contributes to diverse characteristics and functionalities. This review addresses a crucial gap in the literature by providing an overview and up-to-date analysis of starch-chitosan blends. The preparation methods and functional properties of these blends in various forms, such as films, beads and hydrogels, have been extensively discussed. Emphasis is placed on the versatile applications of these blends in research, development and industries such as pharmaceuticals, wastewater treatment, agriculture and food technology. This review aims to provide an insightful overview of starch-chitosan blends and stimulate broader interdisciplinary research interests. By providing concluding insights and prospects, this review highlights the potential for further exploration of the impact of starch-chitosan blends on consumers and the environment.

Treatment of pharmaceutical industry wastewater for water reuse in Jordan using hybrid constructed wetlands

Developing cost-efficient wastewater treatment technologies for safe reuse is essential, especially in developing countries simultaneously facing water scarcity. This study developed and evaluated a hybrid constructed wetlands (CWs) approach, incorporating tidal flow (TF) operation and utilising local Jordanian zeolite as a wetland substrate for real pharmaceutical industry wastewater treatment. Over 273 days of continuous monitoring, the results revealed that the first-stage TFCWs filled with either raw or modified zeolite performed significantly higher reductions in Chemical Oxygen Demand (COD, 58 %–60 %), Total Nitrogen (TN, 32 %–37 %), and Phosphate (PO4, 46 %–64 %) compared to TFCWs filled with normal sand. Water quality further improved after the second stage of horizontal subsurface flow CWs treatment, achieving log removals of 1.09–2.47 for total coliform and 1.89–2.09 for E. coli. With influent pharmaceutical concentrations ranging from 275 to 2000 μg/L, the zeolite-filled hybrid CWs achieved complete removal (>98 %) for ciprofloxacin, ofloxacin, erythromycin, and enrofloxacin, moderate removal (43 %–81 %) for flumequine and lincomycin, and limited removal (<8 %) for carbamazepine and diclofenac. The overall accumulation of pharmaceuticals in plant tissue and substrate adsorption accounted for only 2.3 % and 4.3 %, respectively, of the total mass removal. Biodegradation of these pharmaceuticals (up to 61 %) through microbial-mediated processes or within plant tissues was identified as the key removal pathway. For both conventional pollutants and pharmaceuticals, modified zeolite wetland media could only slightly enhance treatment without a significant difference between the two treatment groups. The final effluent from all hybrid CWs complied with Jordanian treated industry wastewater reuse standards (category III), and systems filled with raw or modified zeolite achieved over 95 % of samples meeting the highest water reuse category I. This study provides evidence of using hybrid CWs technology as a nature-based solution to address water safety and scarcity challenges.

Cellulose nanocrystals mediated spontaneous weaving of ZIF-67 hybrid networks: Enhanced peroxymonosulfate activation and rapid removal of dye

Inter-connected zeolite imidazolate framework-67 (ZIF-67) hybrid networks were successfully synthesized by a cellulose nanocrystals (CNCs) mediated spontaneous weaving strategy, which was denoted as ZIF-67@CNC, and was applied to activate peroxymonosulfate (PMS) for Rhodamine B (RhB) degradation. Characterizations results demonstrated that the ZIF-67 nanocrystals are encapsulated within CNCs and subsequently arranged in a string-like configuration. In comparison to pristine ZIF-67, the ZIF-67@CNC catalyst presented superior performances for RhB dye removal both in terms of degradation efficiency and rate, as the kinetic rate constant increased 5.8-fold. This finding was attributed to the improvement in oxygen-containing groups and meso/microporous structures after the introduction of CNCs, leading to efficient binding to compounds and rapid molecular diffusion. Moreover, the ZIF-67@CNC exhibited remarkable stability throughout the catalysis process in aqueous solutions owing to the robust crosslinking between negatively charged CNCs and positively charged cobalt ions, which significantly mitigated the potential secondary pollution of cobalt to the environment. This research opens up new possibilities for the design of highly efficient and durable ZIF-67-based catalysts to promote future wastewater treatment technology.

ROOT ZONE TECHNOLOGY FOR WASTE WATER TREATMENT

In India, the primary cause of surface and ground water pollution is the discharge of untreated sewage, according to a 2007 study by the Central Pollution Control Board. In India, there is a significant delay between the generation and treatment of household wastewater. India's insufficient treatment capacity is not the only issue; there are also sewage treatment plants that exist, but they are not being maintained or operated. Because of poor design, inadequate maintenance, unreliable electricity supplies, absentee staff, and incompetent management, the majority of government-owned sewage treatment plants remain closed for the most part of the year. Usually, the wastewater produced in these places evaporates or percolates into the soil. Uncollected waste builds up in urban areas, releasing pollutants that seep into surface and groundwater and creating unsanitary conditions. Furthermore, industrialists prefer not to treat the waste produced and instead to dump it untreated into rivers in the areas where these treatment plants are located because the cost of treatment is so high.The Root Zone Treatment System (RZTS), sometimes referred to as the reed bed system or the constructed wetland system, is a sealed filter bed that is planted with vegetation that can grow in wetlands and is made up of a sand, gravel, and soil system, sometimes with a cohesive element. The wastewater flows through the filter bed, where biodegradation of the wastewater occurs, after the coarse and floating material has been removed. Complex physical, chemical, and biological processes that are the outcome of the interaction of wastewater, wetland plants, filter bed material, and microorganisms define the functional mechanisms in the soil matrix that are in charge of the mineralization of biodegradable matter.

Hazard Identification and Risk Analysis of Liquid Effluent Treatment Plant Apply in Chemical Process Industry

The chemical process industry is one of the categories of highly polluting industries and generates strong wastewater of high COD along with hazardous waste which requires effective treatment and disposal/reuse of effluents. In this review, the various sources of wastewaters in the chemical industry are identified and the best available technologies to remove them are critically evaluated. The aim of the present research work was to determine the behavior of various parameters of the chemical wastewater. During the entire study evaluate, monitor, and check various environmental parameters whether they are complying with a given standard or not given by regulatory authority at chemical Industry,. The India based industry produced bulk drugs, fatty acids, fatty alcohol, food additives, personal care products, and others. The monitoring data of the effluent treatment plant will give information on the pollution control by the company and the management of waste. Overall analysis showed that there is no significant difference in pH, BOD, COD, and ammoniacal Nitrogen. The use of conventional treatment methods along with membrane reactors and advanced post-treatment methods resulting in a Coagulation wastewater treatment technology appears to be the best

Synthetic greywater treatment using a scalable granular activated carbon bioelectrochemical reactor

Greywater reuse has emerged as a promising solution for addressing water shortages. However, greywater needs treatment before reuse to meet the required water quality standards. Conventional wastewater treatment technologies are unsuitable for recreating highly decentralized domestic greywater. This study evaluated bioelectrochemical reactors (BERs) with granular activated carbon (GAC) as a sustainable alternative for developing decentralized and low-cost biological treatment systems. BERs using GAC as the anode material and conventional GAC biofilters (BFs) for synthetic greywater treatment were operated in batch mode for 110 days in two stages: (i) with polarized anodes at −150 mV vs. Ag/AgCl and (ii) as a microbial fuel cell with an external resistance of 1 kΩ. Anode polarization produced an electrosorption effect, increasing the ion removal of the BERs. Power production during the operation and cyclic voltammetry tests of the extracted granules revealed electrochemically active biofilm development on the BERs. Although low power density (0.193 ± 0.052 µW m−3) was observed in BERs, they showed a similar performance in sCOD removal (BER = 91.6–89.6 %; BF = 96.2–93.2 %) and turbidity removal (BER = 81–82 %; BF = 30–62 %) to BFs that used 50 % aeration. Additionally, scanning electron microscopy of sampled granules showed higher biomass formation in BER granules than in BF granules, suggesting a higher contribution of sessile (vs. planktonic) cells to the treatment. Thus, the results highlight the synergistic removal effect of the GAC-based BER. The scalable design presented in this study represents a proof-of-concept for developing BERs to use in decentralized greywater treatment systems.

Technical and financial feasibility of a chemicals recovery and energy and water production from a dairy wastewater treatment plant

Due to the high volume of wastewater produced from dairy factories, it is necessary to integrate a water recovery process with the treatment plant. Today, bipolar membrane electrodialysis units (BMEUs) are increasingly developed for wastewater treatment and reutilizing. This article aims to develop and evaluate (technical and cost analyses) a combined BMEU/batch reverse osmosis unit (BROU) process for the recovery of chemicals and water from the dairy wastewater plant. The combined BROU/BMEU process is able to simultaneously produce water and strong base-acid, and reduce power consumption due to the injection of concentrated feed flow into the BMEU. A comprehensive comparative analysis on the performances of two combined and stand-alone BMEU configurations are developed. The proposed combined technology for dairy factory wastewater treatment is designed on a new structure and configuration that can address superior cost analysis compared to similar technologies. Further, the optimal values of permeate flux and current density as two vital and influencing parameters on the performance of the studied dairy wastewater treatment process were calculated and discussed. From the outcomes, the total cost of production in the combined configuration has been reduced by approximately 26% compared to the stand-alone configuration. Increasing the feed concentration rate using the batch reverse osmosis process for the dairy wastewater treatment process can be an ideal solution from an economic point of view. Moreover, point (current density, feed concentration rate, total unit cost) = 328.9,7,14.37\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\left(328.9, 7, 14.37\\right)$$\\end{document} can be considered as an optimal point for the economic performance of the studied wastewater treatment process.

Influence of Different Proportions of the Addition of Electrocoagulated Metal Sludge (EMS) Obtained from Oily Wastewater Treatment on the Properties of Laboratory Bricks

Electrochemical wastewater treatment technologies are increasingly being used in practice, and the combination of electrocoagulation with advanced oxidation processes has been shown to increase treatment efficiency. The treatment of oily wastewater produces electrocoagulated metal sludge (EMS). In this work, the possibility of using different ratios of EMS produced during oily wastewater treatment was investigated. EMS was dried conventionally in an oven at 105 °C and used as a partial substitute for clay in the manufacture of laboratory bricks. The main research objectives of this study were to examine the possibility and justification of introducing EMS in brick production. The results show that an increase in the proportion of EMS in the manufacturing of bricks leads to a deterioration in the quality of the bricks. Bricks with an addition of 1 wt% and 5 wt% EMS showed the best properties. The loss on ignition (LOI), compressive strength, boiling water absorption and initial water absorption were determined at 5.7%; 49 N/mm2, 16%, 14 g/min/200 cm2, 15% for modified bricks with 1 wt% EMS and 6.3%, 48 N/mm2, 20%, 15 g/min/200 cm2 for modified brick with 5 wt%.

Performance evaluation of a microbial fuel cell for resource recovery as struvite and bioelectricity generation from slaughterhouse wastewater

AbstractBACKGROUNDThe microbial fuel cell (MFC) is a potential cost‐effective technology for the energy‐neutral treatment of wastewater. However, the successful implementation of this technology in resource recovery is still limited. In this study, a microbial electrochemical cell was designed and operated for 30 days. Critical factors for removal and recovery of nitrogen and phosphorus as struvite from wastewater were assessed.RESULTSOptimization studies on critical factors such as the chemical oxygen demand (COD) of wastewater (500–2000 mg L−1) and cathode aeration rate (45–135 mL min−1) were conducted using a pure culture of Escherichia coli. The system yielded an average power density of 465 mW m−2, average current density of 915 mA m−2 and phosphorus recovery at an extent of 40% as struvite. Additionally, a maximum reduction in the COD of 90% with an average coulombic efficiency of about 82% was obtained at a short interval of 30 days. Solubility studies of the recovered struvite for 12 h at different pH values from 4.5 to 9 showed a maximum solubility of 80% at pH 4.5 and a minimum of 3.5% at pH 9.CONCLUSIONThis study moves one step closer to applying MFC technology for nitrogen‐ and phosphorus‐rich wastewater treatment with concurrent struvite precipitation and electricity production. In this way, Sustainable Development Goals 2, 6 and 7 can be achieved through resource recovery, clean water and bioenergy. © 2024 Society of Chemical Industry (SCI).

Bibliometric Analysis of Nanostructured Anodes for Electro-Oxidative Wastewater Treatment

Last decade, a growing emphasis on developing sustainable and environmentally friendly technologies for electro-oxidative wastewater treatment has catalyzed innovation and spurred research efforts worldwide. Researchers may explore the use of renewable energy sources to drive electrochemical processes, as well as the development of eco-friendly electrode materials for wastewater treatments. The integration of nanostructured anodes into the electrolytic system for wastewater treatment has led to significant advancements in the removal of pollutants via electro-oxidation. Despite the great number of research articles related to the development and use of nanostructured anodes for electro-oxidative wastewater treatment, to our knowledge, no bibliometric analysis has been published in this domain. Therefore, this work presents a bibliometric study of publications on the designated theme, retrieved from the Web of Science Core Collection database, which were published over the last decade. The visual and network analysis of co-authorship among authors, organizations, countries, co-citation of authors, citation of documents and sources, as well as the co-occurrence of author keywords was performed using two compatible pieces of scientometric software, namely VOSviewer (version 1.6.18) and CiteSpace (version 6.2.R4). From 2013 to 2023, there has been a gradual increase in the number of publications regarding the development and use of nanostructured anodes for electro-oxidative wastewater treatment. It suggests a steady advancement in this field. The People’s Republic of China emerges as the most productive country, and it is a leader in international collaborations. Also, the United States of America, South Korea, and European Union countries have significant impacts on the research in this domain. The development and application of nanostructured materials for urea electro-oxidation is a main and prospective research theme. This bibliometric analysis allowed for the visualization of the present landscape and upcoming trends in this research field, thereby facilitating future collaborative research endeavors and knowledge exchange.

The water energy food nexus: A multi-objective optimization tool

Many methods and tools are used to model and optimize various aspects of the water energy food nexus (WEFN). This work presents a novel software tool for the multi-objective optimization of the WEFN (MOO-WEFN). The model underlying the tool captures all three nexus sectors and the interlinkages between them. In addition, the model imposes constraints that mimic forces affecting the nexus, such as economics, environment, health, and nutrition. The software tool couples Excel with Python, which facilitates the tool's accessibility and ease of use due to its widespread usage and availability. A case study application demonstrates the tool's execution and provides examples of how changes can be made to the data to simulate different nexus developments. Five scenarios are applied to reflect such changes with results demonstrating the overall impact on resource production and consumption. Removing one of the less water-intensive food items results in a 20 % increase in water consumption. Limiting the availability of surface water results in a reallocation of water resources such that 80 % of water needs are satisfied from surface water and groundwater and 20 % from wastewater, compared to the baseline of 100 % surface water. Moreover, upon introduction of the conventional activated sludge treatment technology for wastewater (compared to the incumbent membrane bioreactor technology), energy consumption decreased by 10 %. These results show changes beyond the immediate sector of change and reflect the necessity for integrated modeling that captures the impact of one change on the nexus as a whole, in terms of resource consumption and allocation. Thus, the tool supports the capability of testing how new resources, technologies, and limitations will impact nexus interactions. Furthermore, the tool facilitates carrying out sensitivity and Pareto analyses for data generation and result evaluation.

Impact of Nitrate on the Removal of Pollutants from Water in Reducing Gas-Based Membrane Biofilm Reactors: A Review.

The membrane biofilm reactor (MBfR) is a novel wastewater treatment technology, garnering attention due to its high gas utilization rate and effective pollutant removal capability. This paper outlines the working mechanism, advantages, and disadvantages of MBfR, and the denitrification pathways, assessing the efficacy of MBfR in removing oxidized pollutants (sulfate (SO4-), perchlorate (ClO4-)), heavy metal ions (chromates (Cr(VI)), selenates (Se(VI))), and organic pollutants (tetracycline (TC), p-chloronitrobenzene (p-CNB)), and delves into the role of related microorganisms. Specifically, through the addition of nitrates (NO3-), this paper analyzes its impact on the removal efficiency of other pollutants and explores the changes in microbial communities. The results of the study show that NO3- inhibits the removal of other pollutants (oxidizing pollutants, heavy metal ions and organic pollutants), etc., in the simultaneous removal of multiple pollutants by MBfR.

High-performance internal circulation anaerobic granular sludge reactor for cattle slaughterhouse wastewater treatment and simultaneous biogas production

This research investigates the efficacy of a high-performance pilot-scale Internal Circulation Anaerobic Reactor inoculated with Granular Sludge (ICAGSR) for treating cattle slaughterhouse wastewater while concurrently generating biogas. The primary objective is to assess the efficiency and performance of ICAGSR in terms of organic pollutant removal and biogas production using granular anaerobic sludge. The research methodology entails operating the ICAGSR system under ambient conditions and systematically varying key parameters, including different Hydraulic Retention Times (HRTs) (24, 12, and 8 h) and Organic Loading Rates (OLRs) (3.3, 6.14, and 12.83 kg COD/m³. d). The study focuses on evaluating pollutants’ removal and biogas production rates. Results reveal that the ICAGSR system achieves exceptional removal efficiency for organic pollutants, with Chemical Oxygen Demand (COD) removal exceeding 74%, 67%, and 68% at HRTs of 24, 12, and 8 h, respectively. Furthermore, the system demonstrates stable and sustainable biogas production, maintaining average methane contents of 80%, 76%, and 72% throughout the experimental period. The successful operation of the ICAGSR system underscores its potential as a viable technology for treating cattle slaughterhouse wastewater and generating renewable biogas. In conclusion, this study contributes to wastewater treatment and renewable energy production by providing a comprehensive analysis of the ICAGSR system’s hydrodynamic properties. The research enhances our understanding of the system’s performance optimization under varying conditions, emphasizing the benefits of utilizing ICAGSR reactors with granular sludge as an effective and sustainable approach. Identifying current gaps, future research directions aim to further refine and broaden the application of ICAGSR technology in wastewater treatment and renewable energy initiatives.

Salt stimulates sulfide−driven autotrophic denitrification: Microbial network and metagenomics analyses

Sulfur autotrophic denitrification (SADN) is a promising biological wastewater treatment technology for nitrogen removal, and its performance highly relies on the collective activities of the microbial community. However, the effect of salt (a prevailing characteristic of some nitrogen−containing industrial wastewaters) on the microbial community of SADN is still unclear. In this study, the response of the sulfide−SADN process to different salinities (i.e., 1.5 % salinity, 0.5 % salinity, and without salinity) as well as the involved microbial mechanisms were investigated by molecular ecological network and metagenomics analyses. Results showed that the satisfactory nitrogen removal efficiency (>97 %) was achieved in the sulfide−SADN process (S/N molar ratio of 0.88) with 1.5 % salinity. In salinity scenarios, the genus Thiobacillus significantly proliferated and was detected as the dominant sulfur−oxidizing bacteria in the sulfide−SADN system, occupying a relative abundance of 29.4 %. Network analysis further elucidated that 1.5 % salinity had enabled the microbial community to form a more densely clustered network, which intensified the interactions between microorganisms and effectively improved the nitrogen removal performance of the sulfide−SADN. Metagenomics sequencing revealed that the abundance of functional genes encoding for key enzymes involved in SADN, dissimilatory nitrate reduction to ammonium, and nitrification was up−regulated in the 1.5 % salinity scenario compared to that without salinity, stimulating the occurrence of multiple nitrogen transformation pathways. These multi−paths contributed to a robust SADN process (i.e., nitrogen removal efficiency >97 %, effluent nitrogen <2.5 mg N/L). This study deepens our understanding of the effect of salt on the SADN system at the community and functional level, and favors to advance the application of this sustainable bioprocess in saline wastewater treatment.

EVALUATION OF THE CARBON FOOTPRINT IN THE TREATMENT OF URBAN WASTEWATER IN THE CANARY ISLANDS (SPAIN)

ABSTRACT: Wastewater treatment plants play an important role within the urban water cycle to prevent the natural water environment and human health from being negatively affected by human activities. However, wastewater treatment processes, such as effluent discharge and indirect emissions resulting from energy or chemical production, also negatively affect the environment. Footprints have been used to track human influence on the environment in different areas of interest and have been applied to assess the sustainability of wastewater treatment plants. In this article, a comprehensive review of footprint assessment was investigated to evaluate the wastewater treatment process in wastewater treatment plants. The review showed that carbon footprinting was used to assess the sustainability of WWTPs, and that other footprint assessment applications (such as nitrogen and phosphorus footprinting) were also introduced to assess eutrophication of water bodies. To promote the application of footprint assessment, this article regulates the study objectives, frameworks, system boundaries, data processing methods, and the resulting interpretation process. The pros and cons of the footprint assessments were discussed and investigated in detail, examining the CO2 production on each island of the Canary archipelago, and several suggestions were proposed to improve the footprint assessments. Analysis of footprint assessments at different wastewater treatment plants revealed that wastewater treatment technologies and scales had a significant impact on footprints. Furthermore, research hotspots identified using a keyword network diagram showed that the water-carbon-energy nexus was a promising direction for future studies. The purpose of the study is to improve the reduction of the carbon footprint both at the level of direct and indirect emissions factors using new tools and methodologies. Key Words: Footprint; Waste water; Canary Islands

Phytic acid metal complex as precursor for fabrication of superhydrophilic membrane with photo-Fenton self-cleaning property for microalgae dewatering and oil/water emulsion separation

Membrane technology is regarded as one of the most effective approaches for microalgae dewatering in the biofuel production industrial and oil/water emulsion separation. However, it inherently suffers from the issue of membrane fouling, particularly irreversible membrane fouling, which is hard to remove by physical methods. Herein, a robust superhydrophilic membrane combined with photo-Fenton self-cleaning property was developed for microalgae dewatering and oil/water emulsion separation. Phytic acid (PA) and FeIII formed a hydrophilic PA-FeIII complex on the polyethersulfone (PES) membrane as the precursor for the in situ growth of β-FeOOH nanorods. When used for microalgae filtration, the irreversible fouling that blocked membrane pores could be degraded by the photo-Fenton reaction. Hence, the obtained PES/PA@β-FeOOH membrane possessed a flux recovery rate (FRR) of 90.2 % (within 30 min), which was significantly higher than that of the PES membrane (32.9 %). The proteins and polysaccharides (extracellular organic matter) attached on the PES/PA@β-FeOOH membrane with photo-Fenton cleaning were 11.2 and 9.1 mg/m2, which was considerably lower than that of PES after hydraulic cleaning (184.1 and 334.9 mg/m2). Moreover, due to the superhydrophilic, the prepared PES/PA@β-FeOOH membrane also exhibited excellent oil/water emulsion separation ability. This work presents a facile and mild strategy to design an anti-fouling coating with superhydrophilic and photo-Fenton activity, which can be used in membrane technology for microorganism filtration and wastewater treatment.

Natural mineral raw materials as granular filtering materials in industrial and waste water treatment

Analysis of currently existing methods of natural and waste water treatment from heavy metals has shown that one of the most promising is the sorption method using natural inorganic materials as sorbents: zeolite, diatomite, and vermiculite. The relevance of the topic is dictated by the need to develop an original technology of wastewater treatment and water treatment, which allows constant monitoring of the level of pollution of natural waters by industrial wastewater from metallurgical enterprises. The proposed methods of sorbent modification create a basis for studying the structure, porosity, and sorption capabilities of the mentioned natural materials. All three minerals: zeolite, diatomite, and vermiculite belong to highly porous, structured materials, promising for use as stable sorption systems in water treatment and water purification. The influence of physical and chemical characteristics of natural sorbents and the application of new promising environmentally safe materials and reagents for water treatment are considered. The sorption of copper ions on natural zeolite material before and after its modification by hydrothermal method was investigated. The activity of sorbents was estimated by the value of sorption capacity, i.e. the amount of heavy metal ions absorbed by a unit mass of sorbent based on zeolite and its modified form.

N-coordinated single cobalt atoms catalyst triggering concerted radical-nonradical process in catalytic ozonation for efficient water decontamination

Heterogeneous catalytic ozonation (HCO) has been developed as a promising technology for wastewater treatment, while traditional radical-based HCO process still suffers from insufficient mineralization of organic pollutants. Herein, we constructed a N-coordinated single cobalt atoms catalyst (CoSAC-N-C) triggering concerted radical-nonradical process in catalytic ozonation for efficient decontamination of pollutants. Experiments and theoretical calculations proved that mediate O in O3 obtained electrons from electron-rich N sites for hydroxyl radical (·OH) production, and the terminal O in O3 was attracted on electron-deficient Co sites for nonradical *O generation by O-O cleavage. The synergistic oxidation of ·OH and *O enabled excellent pollutants mineralization, surpassing most of conventional HCO catalysts. CoSAC-N-C exhibited excellent treatment performance for the coking wastewater in a continuous-flow reactor with COD reducing from 86 mg/L to less than 50 mg/L. This work provided a viable strategy of developing dual-site HCO catalysts to promote concerted radical-nonradical oxidations for wastewater treatment.