Technological Operations Research Articles

Justification of range limits of root spray angle of an adaptive spraying device

BACKGROUND: Oscillations of the sprayer field boom in the transverse-vertical plane causes a decrease in the quality of the technological operation. This is especially true in relation to the operation of small-sized single-support barrow-type sprayers. One of the possible solutions to compensate the effect of transverse oscillations of the boom on the quality of spraying is the use of adaptive sprayers with a variable root angle of the spray jet, responding to the position taken by the sprayer in relation to the surface being treated. AIM: Justification of the necessary limits for changing the spray angles of an adaptive sprayer for a single-support spraying device. The novelty of the research lies in the fact that insufficient attention is paid to the implementation of technologies using means of small-scale mechanization, unlike industrial agricultural machinery. METHODS: A prototype of a single-support boom motor sprayer was used as the study object. The field experiment was carried out at the experimental area of the Oryol State Agrarian University. Data acquisition on the deviation of the sprayer from the vertical axis was carried out using a specially developed angle gauge. A spreadsheet processor in the Microsoft Excel environment was used to perform mathematical processing of the decrypted experimental data. The study of the obtained analytical dependencies was carried out in the environment of the Mathcad 14.0 mathematical calculation system. RESULTS: It has been experimentally found that the maximum deviations of the sprayer from the vertical can be up to 30° during operation. At the same time, the average amplitude of the transverse operating oscillations of the boom of a single-support barrow-type boom sprayer ranges from +11° to -18°. The amplitude of the transverse oscillations of a single-support sprayer depends on the operator’s skills and the unit motion velocity. Balancing the sprayer is important due to the moment of force caused by the weight of the one-sided field boom. A formula for calculation of the spray width of one sprayer, taking into account the geometric parameters of a single-support sprayer, as well as its inclination angle in the transverse-vertical plane, has been derived. An analytical relationship that makes it possible to calculate the required limits of the root angle of the spray jet of an adaptive sprayer, taking into account the installation distance of the sprayer relative to the vertical plane passing through the support point of the sprayer, has been obtained. The values of the root spray angles for the deflectors of adaptive sprayers, with the sprayer oscillations amplitude from -18° to +11° in the transverse-vertical plane, were found. CONCLUSIONS: The practical value of the study lies in the potential of using the formula to determine the range limits of root spray angles when designing and developing adaptive sprayers.

A Review on the Recovery and Separation of Gallium and Indium from Waste

Gallium and indium are crucial metals in various industries, such as the medical and telecommunication industries. They can find applications as pure metals, alloys and alloy admixtures, oxides, organometallic compounds, and compounds with elements such as nitrogen or arsenic. Recovery of these two metals from waste is an important issue for two main reasons. First, gallium and indium are scattered in the Earth’s crust and their minerals are too rare to serve as a primary source. Second, e-waste contributes to the rapidly growing problem of Earth littering, as its amount increased significantly in recent years. Therefore, it is essential to develop and implement procedures that will enable the recovery of valuable elements from waste and limit the emission of harmful substances into the environment. This paper discusses technological operations and methods that are currently used or may be used to produce pure gallium and indium or their oxides from waste. The first step was described—waste pretreatment, including disassembly and sorting in several stages. Then, mechanical treatment as well as physical, chemical, and physicochemical separations were discussed. The greatest emphasis was placed on the hydrometallurgical methods of gallium and indium recovery, to be more precise on the extraction and various sorption methods following the leaching stage. Methods of obtaining pure metals or metal oxides and their refining processes were also mentioned.

ЭФФЕКТИВНОСТЬ ИСПОЛЬЗОВАНИЯ ОКУЧИВАЮЩИХ РАБОЧИХ ОРГАНОВ С МУЛЬЧИРУЮЩИМ РЕАКТИВНЫМ УСТРОЙСТВОМ В ГРЕБНЕВОЙ ТЕХНОЛОГИИ ВОЗДЕЛЫВАНИЯ КАРТОФЕЛЯ

An analysis of machines and equipment for hilling potato plantings is given, the timing of technological hilling operations is considered, starting from the pre-emergence period until the tops are closed in ridges and rows. The geometric shapes of the bed during the process of hilling potatoes are considered in the form of drawings according to the phases of development and height of the plants. To implement the task, a Hiller with a device for mulching the surface of the ridge is proposed, which allows you to keep the tuberous nest from overheating in hot weather, destroy germinating weeds and retain moisture in the ridge, it is proposed to be used to implement the task. This is a hiller with flaps, behind the body of which grinding devices are installed in the form of rotating disks with blade fingers mounted on an axis. A rod with a spring for copying the surface of the ridge by the mulching device is installed at an angle in the flaps of the hiller body with a pitch equal to twice the diameter of the fingers of the chopping device. It is noted that the use of the proposed hilling device makes it possible to perform interrow cultivation in one pass, combine the operation of destroying the pruned soil layer and crushing it, destroying weeds and mulching the surface of the ridge. The results of a study of the use of an experimental hiller in practice show that in the created fine-lumpy ridge layer from the soil, it is saturated with air oxygen, which accelerates the anaerobic and aerobic processes occurring in it, contributing to the accelerated decomposition and mineralization of soil organic matter. A comparison of the performance indicators of serial and experimental hillers has been carried out. It has been established that the experimental hiller allows the cultivator to operate at increased speeds of up to 2.6 m/s and to create a cover of the ridge with a mulching layer of soil of 3–4 cm, with the size of lumps on the surface layer of the ridge of 1–1.5 cm, to destroy weed seedlings in comb up to 95%. During the research, it was found that the effectiveness of the introduction of an experimental hiller will increase potato yields by 5-7%.

МОДЕЛЬ ОЦЕНКИ ПОТЕРЬ ПРИ УБОРКЕ СОИ

Soybean losses during combine harvesting, depending on conditions, can reach more than 30%. This has a significant impact on the profitability of soybean production as a whole. The article is devoted to modeling possible losses when harvesting soybeans in an agricultural enterprise. The results of monitoring the quality of soybean harvesting and information materials published in periodicals were used in the research process. Total losses were considered as the sum of self-shedding losses due to harvesting delays and losses directly behind the combines. Three options for soybean harvesting are considered: within the agricultural period, partially within the agricultural period and completely beyond the agricultural period. Modeling of losses by self-shedding is performed depending on the harvesting option and the duration of work over the agricultural period. Modeling of soybean losses for a separate combine is carried out on the basis of dependencies that take into account changes in losses from the duration of work over the agricultural period, operating speed, cutting height and lodging. A distinctive feature of the model is the prediction of the reliability of combines, depending on the operating time since the start of operation. The initial data of the model is formed by the following indicators: cleaning conditions; consumer properties of combines; technological operating modes of combines when harvesting soybeans. The model provides for each combine harvester to determine performance indicators based on operating time. Based on this, the following are determined: the total operational productivity of combines and the duration of soybean harvesting without taking into account and taking into account delays due to weather conditions. Next, the technological losses behind each combine, the total losses of soybeans behind the combines, and the losses of soybeans by shedding during the period of operation after the agricultural period are modeled. As a result, the total soybean losses in the agricultural enterprise during the harvesting period are estimated. The simulation results make it possible to select the most favorable scenario for using combines in an enterprise from the point of view of minimizing losses.

Development of programmed trajectories based on the mobility degrees of manipulation robot with a spherical coordinate system for removing oxide film in the production of commercial magnesium

The object of this study is to robotize the technological operation of removing the oxide film from the surface of a magnesium melt poured into continuously moving molds of a casting conveyor for the production of commercial magnesium. To robotize this technological operation, it is proposed to use a two-armed manipulation robot with a spherical coordinate system, which has six degrees of mobility. Software trajectories have been developed according to the degrees of mobility of the manipulation robot in terms of position, speed, and acceleration to perform the technological operation of removing the oxide film from the surface of the magnesium melt poured into the moving molds of the foundry conveyor. Programmed trajectories are described by quadratic polynomials that satisfy restrictions on the values of the generalized coordinate, velocity, and acceleration. These limitations are determined by the design features and energy capabilities of the degrees of mobility drives of the manipulation robot. Programmed trajectories along the first and second degrees of freedom compensate for the continuous movement of the molds of the foundry conveyor. Programmed trajectories along the third and fourth degrees of mobility enable the collection of the oxide film from the surface of the magnesium melt. Programmed trajectories along the fifth and sixth degrees of freedom enable the discharge of the collected oxide film into a special container. The reliability of the developed programmed trajectories is confirmed by the simulation results using MATLAB version R2015b. Based on the results, a cyclogram for controlling a manipulation robot has been constructed to perform the technological operation of removing the oxide film in the production of commercial magnesium. The results could be used in the robotization of technological processes for removing the oxide film in the production of commercial magnesium or similar foundries

Computational studies of electromagnetic field propagation and deforming of structural elements for a thin-walled curved workpiece and an inductor

Introduction. At the present stage of industrial development, the electromagnetic field is widely used in various technological processes. The force effect of an electromagnetic field on conductive materials is used in a class of technological operations called electromagnetic forming. Problem. Under the conditions of electromagnetic forming, the main element of the technological equipment – the inductor – is simultaneously subjected to the force impact with the workpiece. At certain levels of the electromagnetic field, the deformation of the inductor becomes so significant that it can lead to a loss of its efficiency. Goal. Computational analysis of a thin-walled curved workpiece and a two-turn inductor under the conditions of electromagnetic processing of the workpiece corner zone. Determining the distribution of quantitative characteristics of the electromagnetic field and the stress-strain state and conducting assessments based on them regarding the efficiency of the technological operation. Methodology. Computational modeling using the finite element method as a method of numerical analysis. The results on the distribution of quantitative characteristics of the electromagnetic field and components of the stress-strain state for a thin-walled workpiece and an inductor are obtained. It is shown that for the specified characteristics of the technological operation, the inductor remains operational, and plastic deformations occur in the workpiece. A series of calculations were carried out, in which some parameters of the technological system were varied. Originality. For the first time, the results of the calculation analysis of the quantitative characteristics distribution of the electromagnetic field of the deformation process for the «inductor – thin-walled curved workpiece» system are presented. Practical value. The presented design scheme of a curved thin-walled workpiece and a two-turn inductor, the method of calculation analysis and some obtained results can be used in the analysis of electromagnetic processing of thin-walled structures that contain curved elements.

Development of Resource Conservation Technologies and Complexes of Machines for Cultivation of Vegetable Crops

The main activities of leading foreign companies are currently the development and production of agricultural machinery, taking into account new legislative requirements both for agricultural production in general and directly for the machinery itself. There is a clear trend towards the widest use of modern computer and information technologies in the design of agricultural machines, which allows to increase productivity and quality of technological operations while reducing operating costs, as well as improve working conditions of employees, management and control of work performed. Intensive resource conservation technologies are technologies related to the introduction of the latest high-performance combines, tractors and a plume of wide-range or combined agricultural units. The next type of resource conservation technologies is based on knowledge and respect for the laws of nature. These are resource conservation technologies through the biologization of agriculture. Resource conservation activities in crop production are based on the complete restoration of land fertility after the removal of nutrients from the soil by agricultural crops. This is ensured by the integrated application of organic and inorganic fertilizers, green manure, bacterial fertilizers, as well as peat and sapropel. All crop production technologies should be resource conservation, environmentally balanced, and have a pronounced zonal character. Moisture conservation technologies in crop production have great prospects due to the development of new crop rotations with an expanded set of crops.

Розвиток інтелектуальних транспортних систем

The purpose of the article is to develop a refined methodology for the general design of a container terminal. The difference between the given design methodology and the existing ones is that a decision is proposed to change its throughput (annual container flow passing through it), without changing the dimensions of the container yard and the way containers are stored, that is, for the same capacity of the container yard. Such cases occur, for example, when it is necessary to reconstruct a container terminal. Cargo terminals for containers are a specific field of logistics and cargo delivery system, where cargo is processed in consolidated transport modules - containers.
 Considered the main stages of designing a container terminal as a complex stochastic technical system: setting the task (it should be a single one); selection and determination of elements of technological zones and the structure of the container terminal, as various connections between system elements; analysis of system functioning (including its modeling); account of interaction of the system with the environment; consideration of the results of the container transport and technological system and operation. It is determined that this general methodology can be used during the creation or analysis of any other transformation of a technical or social system that receives a stream of some objects with one set of parameters, processes it through its structure and outputs them from other parameters. This method of formalizing the functioning of the container terminal can be used for its calculations, modeling, research and optimization. In the processes of interaction with environmental systems, the container terminal passes from one state to another, which is characterized by the types and volume of technological operations that must be performed at a certain moment, cargo that must be stored, delivered to and from the terminal, assembled, sorted, business employee processes, forklifts, cranes and other equipment in use. The functioning of the container terminal (part of the warehouse system) as a procedure of transitions from one state to another can be represented in the form of a graph or transition probability matrix.

Удосконалення методики проєктування контейнерного терміналу

The purpose of the article is to develop a refined methodology for the general design of a container terminal. The difference between the proposed design methodology and the existing ones is that a solution is proposed to change its throughput (annual container flow passing through it), without changing the dimensions of the container yard and the way containers are stored, that is, with the same capacity of the container yard. Such cases occur, for example, when it is necessary to reconstruct a container terminal. Cargo terminals for containers are a specific area of logistics and cargo delivery systems, where cargo is processed in consolidated transport modules – containers. The main stages of analyzing or projecting a warehouse as a complex stochastic technical system should be considered: objective setting (it should be single); selection and determination of elements of technological areas and warehouse structure, as various connections between system elements; analyzing of system functioning (including its simulation); consideration of system interaction with surrounding environment; consideration of results of the warehouse system performance, and operation. It is interesting to point out that this general methodology can be used while creating or analyzing any other transformation of technical or social system, which receives a flow of some objects with one set of parameters, processes it through its structure, and gives them out with other values of parameters. 
 This method of formalizing the functioning of the container terminal can be used for its calculations, modeling, research and optimization. In the processes of interaction with environmental systems, the container terminal passes from one state to another, which are characterized by the types and volume of technological operations that must be performed at the moment, cargo that must be stored, delivered to and from the terminal, assembled, sorted, business employee processes, forklifts, cranes and other equipment in use. The functioning of the container terminal (part of the warehouse system) as a procedure of transitions from one state to another can be represented in the form of a graph or transition probability matrix.

Справочная информационная система FLR-Library для адаптивного лесовосстановления: информационная модель

The process of restoring forest landscapes in the context of global urbanization and deforestation of relict stands,
 as well as climate change, is complex and important for studying, planning stages and technological operations and
 predicting the results of vitality and growth of stands. To solve this problem, a reference information system for adaptive
 reforestation is being developed. In this paper, the modeling and description of the adaptive reforestation process is carried
 out using functional diagrams constructed using the IDEF0 methodology, and the description of the arrows of the context
 diagram with explanations of the processes is given in detail. For a detailed analysis of the subject area and modeling of
 the adaptive reforestation process, we decomposed the context diagram into diagram A1, which shows the implementation
 of the process of choosing a technology for the restoration of the forest landscape from the point of view of technology
 and technical means, and diagram A2, which examines the restoration technology from the point of view of several
 forestry descriptors, which takes into account the specifics of the industry. As a result of the simulation, diagrams A0,
 A1, A2 were obtained, which show a structured image of the system functions, information and objects connecting these
 functions.

Рекуперация и очистка газовых выбросов целлюлозного производства

For pulp production, large-scale enterprises have been built which, while in operation, are subject to new requirements, different from the design ones, for economic efficiency, labour safety, as well as impact on the local population and the environment. Significant success in this work has been achieved by changing the liquor recovery technology, switching to burning black liquor of increased concentration, which makes it possible to almost completely eliminate the largest source of hydrogen sulfide and methyl mercaptan emissions with flue gases, reduce sulfur losses and improve energy efficiency of soda recovery boilers. Another significant source of soda recovery boiler emissions is a smelt dissolving tank vent. An important technological operation of dissolving molten sodium salts with weak white liquor supplied from the causticization shop takes place in the tank. The modern development of smelt leaching technology is related to the improvement of equipment compatible with the technology of regeneration of chemical reagents for pulp production. Heat exchangers and gas purifiers of “gas-liquid” systems, easier to adapt to technological requirements compared to other systems, are installed on the dissolving tank vent. The installation of such equipment provides the change in the smelt leaching technology, and affects the technology of causticization and lime recovery. This article covers the research of the relationship between the technical solutions ensuring the safety of personnel in the boiler shop, heat and chemicals recovery, as well as purification of gas emissions and the changes in the technology of smelt leaching in the soda recovery boiler of the pulp mill. On the basis of experimental data and a mathematical model of the movement of the vapour-gas mixture in the smelt dissolving tank vent, the technological feasibility of installing heat exchangers at different heights of the vent and the possibility of effective purification of gas emissions using a direct-flow sprayer have been considered. The applicability of the irrigation of the steam-gas flow with weak white liquor, which is formed during the cycle of chemical regeneration in pulp production, as well as the conditions for ensuring reliable operation of gas purification equipment, have been investigated. The quantitative characteristics of the necessary change in consumption and composition of weak white liquor and the methods of its supply to the dissolving tank have been obtained.

ELECTRON-BEAM GUN FOR MANUAL ELECTRON-BEAM WELDING IN LUNAR SURFACE CONDITIONS

In recent years, increasing attention in space topics has been paid to the exploration of the Moon. Not the least attention is paid to solving problems related to providing the necessary living conditions for astronauts, with the construction and assembly of a large number of technical devices and structures on site. The operation and development of orbital complexes, as well as the promising tasks of creating structures on the lunar and Martian surfaces, involve the introduction of technologies for the installation and repair of space objects. When working in open space, there are a large number of operations (first of all, repair and restoration or fixation of fragments of large-sized structures), for which it is difficult and impossible to prepare in advance. In addition, there is a possibility of emergencies that require urgent cutting, welding, or soldering technological operations, in which the process and volume of the operation will be determined by the cosmonaut directly on the spot, where he will be able to assess the volume and method of performing the necessary work. Therefore, the creation of modern electron-beam equipment for manual welding, which will contribute to the extension of the life of space objects and sometimes to the preservation of the lives of crews, is necessary. This equipment must be compact and efficiently perform operations on electron beam welding and related technologies under lunar surface conditions. The results of manual electron beam welding experiments carried out in open space indicate that the equipment, which was created earlier, makes it possible to weld stainless steels, titanium and aluminum alloys up to 1.5 mm thick. At the same time, the thickness of the material used in the manufacture of shells of manned space vehicles reaches 4...6 mm, and the length of welding seams can reach several meters. The purpose of this work is to create a new generation of equipment that will solve the problem of welding materials from 4 to 6 mm, which are mainly used in modern aerospace technology.

Laser Rangefinder Methods: Autonomous-Vehicle Trajectory Control in Horticultural Plantings

This article presents a developed motion control system for a robotic platform based on laser-ranging methods, a graph traversal algorithm and the search for the optimal path. The algorithm was implemented in an agricultural building and in the field. As a result, the most efficient algorithm for finding the optimal path (A*) for the robotic platform was chosen when performing various technological operations. In the Rviz visualization environment, a program code was developed for planning the movement path and setting the points of the movement trajectory in real time. To find the optimal navigation graph in an artificial garden, an application was developed using the C# programming language and Visual Studio 2019. The results of the experiments showed that field conditions can differ significantly from laboratory conditions, while the positioning accuracy is significantly lower. The statistical processing of the experimental data showed that, for the movement of a robotic platform along a given trajectory in the field, the most effective conditions are as follows: speed: 2.5 km/h; illumination: 109,600 lux; distance to the tree: 0.5 m. An analysis of the operating parameters of the LiDAR sensor showed that it provides a high degree of positioning accuracy under various lighting conditions at various speeds in the aisles of a garden 3 m wide with an inter-stem distance of 1.5 m and a tree crown width of 0.5 m. The use of sensors—rangefinders of the optical range—allows for the performance of positional movements of the robotic platform and ensures the autonomous performance of the basic technological operations of the units in intensive gardens with a deviation from the specified trajectory of no more than 8.4 cm, which meets the agrotechnical requirements.

Экономическое обоснование уборки зерновых культур ранних фаз спелости очесом и приготовления корма из необмолоченного вороха

Abstract. The stripping of grain allows organizing the separate harvesting of grain for feed in early phases and for food purposes in the phase of full ripeness. Purpose. To carry out the economic justification of the technology of harvesting early ripening grains by stripping without threshing and the technology of preparing pelleted fish feed for fish from unthreshed ears and additives. Methods. Economical estimation of the technology of winter wheat harvesting by stripping in early phases of ripeness without threshing and its processing into feed has been carried out by comparing operational and indicated expenses of the total technological operations. Scientific novelty lies in the joint estimation of the economic efficiency of technologies of harvesting and processing of grain crops. Results. The prime cost of harvesting cereals without threshing and separation is 2.65 times lower than that of the harvesting technology with combine threshing and separation. The cost of performing operations under the traditional (from grain) and the new (from ears) technologies of pelleted fish feed production is almost equal. However, the total cost of technological operations of harvesting grain without threshing and preparation of pelleted feed from unthreshed ears using the new technology is 24.3 % lower than that of traditional technology of harvesting with threshing and preparation of feed from grain. The use of non-grain part of ears of early ripeness in the composition of feed will increase the amount of raw material from hectare of sown area by 20–30 %. The proposed technologies is cost-effective and promising for implementation in the agricultural enterprises of southern Russia.

Обучение рабочих и специалистов для горнодобывающей отрасли в аспекте безопасности труда

Labor safety in the mining industry is a set of measures aimed at improving the production environment that affects the health and operability of a person at work and the continuous professional development of employees. The objective assessment of safety of all stages of the production process is a crucial aspect of the enterprise’s activities. It is based on compliance with the requirements of regulatory authorities in the field of labor protection and industrial safety, occupational standards as characteristics of labor conditions, qualifications and professional competence of an employee, as well as compliance with the federal state educational standards as a basis of training of a specialist or a worker who are the main participants of the technological process in mining. The formation of professional competencies of each employee that ensure safe operation at the site or enterprise, the in-depth knowledge, development of operational algorithms, and the skill to perform technological operations at the workplace primarily depend on the basic education of employees obtained under the programs of secondary vocational education. The Federal State Educational Standards existing since 2013 became outdated and were gradually updated in 2022–2023. The training terms were normatively determined within the framework of the federal project «Professionalism» which aimed to resume close cooperation between educational organizations and enterprises. Educational organizations were enabled to increase the time to practice. The qualification of graduates under skilled worker training programs has become universal and does not specify the type of activity, whereas a new type of professional activity, namely ensuring the functioning of the occupational health and industrial safety management system at the site (or enterprise), was introduced for midlevel specialists. All this should ensure the future training of new personnel in compliance with the requirements of Federal Law of July 21, 1997 № 116–FZ «On industrial safety of hazardous production facilities» and the Russian Federation Government Decree of August 17, 2016 № 806 «On application of the risk-oriented approach in the organization of certain types of state control (supervision) and introducing amendments to some acts of the Government of the Russian Federation».

Investigation and establishment of rational geometric factors of die in the deep drawing without a blank holder

Deep drawing is an operation to transform flat or hollow blanks to create hollow parts of the required shape and size. Deep drawing is an essential operation in sheet-forming technology to manufacture hollow parts. These parts are commonly used in the automobile, aviation, and household appliances industries. To prevent wrinkles on the rim part, a blank holder will be used to compress and flatten the workpiece before the metal is pulled into the die by the punch. Deep drawing without using workpiece holding force is applied to form hollow parts with low depth. In this case, the mould has a simple structure, helping to reduce manufacturing time and costs and making it easier to maintain and repair. The radius of the die is an essential parameter in deep drawing; it greatly affects the quality of products (making wrinkles and tears). However, this study has shown that, in deep drawing without using a blank holder, the cone angle of the die α has a major influence on the quality of the body and rim of the products, such as the products may or may not have wrinkles, either being thinned or thickened. This cone angle also affects the drawing force. This study has determined that, with α>120°, wrinkling begins to appear in the part wall, and wrinkling tends to increase as the angle α increases. The cone angle of the die for quality products is in the range of 100°<α≤120°. The taper angle smaller than 120° simultaneously increases the quality of the products and the cost of manufacturing die, so the most optimal value is determined by simulation and experimental verification as α=120°. The results of this study can be applied to fabricate hollow cylindrical parts with similar shapes when using the deep drawing method without using the blank holder

A modification of explicit time integrator scheme for unsteady power-law nanofluid flow over the moving sheets

This paper introduces an exponential time integrator scheme for solving partial differential equations in time, specifically addressing the scalar time-dependent convection-diffusion equation. The proposed second-order accurate scheme is demonstrated to be stable. It is applied to analyze the heat and mass transfer mixed convective flow of power-law nanofluid over flat and oscillatory sheets. The governing equations are transformed into a dimensionless set of partial differential equations, with the continuity equation discretized using a first-order scheme. The proposed time integrator scheme is employed in the time direction, complemented by second-order central discretization in the space direction for the momentum, energy, and nanoparticle volume fraction equations. Quantitative results indicate intriguing trends, indicating that an increase in the Prandtl number and thermophoresis parameter leads to a decrease in the local Nusselt number. This modified time integrator is a valuable tool for exploring the dynamics of unsteady power-law nanofluid flow over moving sheets across various scenarios. Its versatility extends to the examination of unstable fluid flows. This work improves engineering and technological design and operation in nanofluid dynamics. Improving numerical simulations’ precision and computational efficiency deepens our comprehension of fundamental physics, yielding helpful information for enhancing systems that rely on nanofluids.

Investigation of factors influencing the process of cement formation and its contacts with casing pipes on the example of Mangystau region fields

This work is devoted to the study of factors affecting the formation of cement stone and its contacts with casing pipes, the development of recommendations and technological methods to improve the quality of well cementing. The main task of cementing wells is hermetic separation of rocks with different saturation patterns. The solution to this problem is quite difficult, because it depends on many factors.
 Based on the analysis of the results of acoustic cement bond logging and field studies of wells, it was found that the quality coefficient of cementing with a slight error can characterize the annulus integrity. In this regard, when conducting skilled or experimental work, the quality coefficient of cementing was used by us as the main parameter for evaluating the effectiveness of various technological operations carried out during well cementing.

Ensuring quick changeability of the working bodies of technological machines in the construction and maintenance of the landscape, road-building, and agricultural industries

The relevance of the subject matter is conditioned by the high-efficiency use of reconfigurable manufacturing systems during construction work and the associated need to develop and implement technological machines with replaceable working bodies. The purpose of this study is to analyze the invariance of the equipment used by types of work in landscape and landscape construction. The study used theoretical methods of analysis and synthesis of information on the principles of the practical application of a universal machine with a wide range of mounted technological working bodies. The results obtained indicate the high relevance of the issue of the rapid changeability of mounted technological working bodies. Its effective solution lies in the creation of reconfigurable production machines based on a universal wheelbase with replaceable working bodies of variable layout by type of work, for which a new design of an inter-module basing and fastening device is proposed. The possibility of its practical application in the BobCat loader system is considered. It is established that, in general, the use of the BobTach mounting frame during various technological operations ensures an increase in the efficiency of this technological equipment. In addition, it significantly increases the performance of the entire model range of equipment and testifies to the versatility of the specified mounting frame. The practical significance of the results obtained is conditioned by the possibility of their application in the development and implementation of modern technological machines with rapidly replaceable working bodies in the agricultural sector and road construction.

Assessment Framework for BIM-Digital Twin Readiness in the Construction Industry

This study introduces a pioneering structural equation modeling (SEM)-based framework to assess BIM-DT adoption readiness in sustainable construction. The research’s approach delves into the intricate correlation between key success factors (KSFs) and sustainable parameters (SPs), fostering BIM-DT deployment. This interdisciplinary perspective provides a holistic understanding of the impact of KSFs on BIM-DT adoption. The research aims to identify KSFs and parameters, prioritize their relative weights for BIM-DT implementation, analyze KSFs and SPs correlations, and offer practical insights into the findings. The results revealed the importance of sustainability considerations in BIM-DT adoption, with cost optimization and resource management playing pivotal roles. The findings also revealed that the readiness of the organization to adopt the technology, availability of technology operators, availability of standards and codes for the new technology, availability of knowledge, skills, and competencies to adopt the technology, and availability of funds and financial investment are the top-ranked KSFs contributing to the successful adoption of BIM-DT.