TE Modes Research Articles

A Dual-Passband Frequency Selective Surface with High Angular Stability and Polarization Insensitivity.

In this paper, a dual-passband frequency selective surface (FSS) with high angular stability and polarization insensitivity is proposed. The unit structure consists of a circular aperture, two annular apertures and four cross apertures. The designed FSS can achieve a double-passband at the interested frequencies of 8.45 GHz and 12.76 GHz with an insertion loss of less than 1 dB, and it can retain a stable transmission characteristic with the incident angle ranging from 0° to 86° for TE mode and from 0° to 83° for TM mode. Good agreement between the experimental results and the simulated response verifies the feasibility of the proposed FSS.

Manipulating terahertz guided wave excitation with Fabry-Perot cavity–assisted metasurfaces

Metasurfaces are emerging as powerful tools for manipulating complex light fields, offering enhanced control in free space and on-chip waveguide applications. Their ability to customize refractive indices and dispersion properties opens up new possibilities in light guiding, yet their efficiency in exciting guided waves, particularly through metallic structures, is not fully explored. Here, we present a new method for exciting terahertz (THz) guided waves using Fabry-Perot (FP) cavity-assisted metasurfaces that enable spin-selective directional coupling and mode selection. Our design uses a substrate-free ridge silicon THz waveguide with air cladding and a supporting slab, incorporating placed metallic metasurfaces to exploit their unique interaction with the guided waves. With the silicon thin layer and air serving as an FP cavity, THz waves enter from the bottom of the device, thereby intensifying the impact of the metasurfaces. The inverse-structured complementary metasurface could enhance excitation performance. We demonstrate selective excitation of TE00 and TE10 modes with directional control, confirmed through simulations and experimental validations using a THz vector network analyzer (VNA) system. This work broadens the potential of metasurfaces for advanced THz waveguide technologies.

Fusion design of six-port waveguide coupler integrating tight and loose coupling

This paper introduces a fusion design method of a six-port waveguide (WG) coupler integrating tight and loose coupling together. The couplers exhibit a compact size due to the stacked configuration of three WGs. A methodology for designing the integrating tight and loose coupler is presented. The tight and loose coupling is achieved by setting a rectangular slot in the common narrow wall along with one or two cross slots in the common broad wall. Inspired by the superposition of TE10 and TE20 modes used to design the short-slot −3-dB coupler. The loose-coupling part of the fusion design is analyzed theoretically utilizing modes superposition. Based on the theoretical analysis, the loose coupling can be precisely designed, meanwhile, low coupling-level fluctuation can be obtained in the operating band. For demonstration, two design examples are designed and a prototype centered at about 3.73 GHz is fabricated. The fractional bandwidth (FBW) (|S11| < −15 dB) is about 28.4 %. Within it, the tight coupling (−3 dB) coupler achieves ± 0.5 dB amplitude imbalance. Meanwhile, the loose coupling (−20 dB) coupler achieves little fluctuation of < 0.56 dB and its isolation is better than 25 dB.

Compact, low-loss, and high-polarized-extinction ratio terahertz TM-pass polarizer based on a hybrid plasmonic waveguide with a graphene ridge

A compact, low-loss, and high-polarized-extinction ratio TM-pass polarizer based on a graphene hybrid plasmonic waveguide (GHPW) has been demonstrated for the terahertz band. A ridge coated by a graphene layer and the hollow HPW with a semiround arch (SRA) Si core is introduced to improve structural compactness and suppress the loss. Based on this, a TM-pass polarizer has been designed that can effectively cut off the unwanted TE mode, and the TM mode passes with negligible loss. By optimizing the angle of the ridge, the height of the ridge, air gap height, and the length of the tapered mode converter, an optimum performance with a high polarization extinction ratio of 30.28 dB and a low insert loss of 0.4 dB is achieved in the 3 THz band. This work provides a scheme for the design and optimization of polarizers in the THz band, which has potential application value in integrated terahertz systems.

Compact multichannel reconfigurable mode demultiplexer enabled by phase change material

The reconfigurable mode demultiplexer is a crucial component for flexibly routing modes into different channels in on-chip multimode photonic systems with enhanced information processing capabilities. In this paper, we present a multichannel reconfigurable mode demultiplexer enabled by ultralow-loss phase-changing Sb2Se3. By harnessing the phase-change-mediated mode coupling in asymmetric directional couplers (ADCs), one or more of the higher-order modes including TE1, TE2 and TE3 modes could be selectively dropped from the bus waveguide with low losses. With an optimized ADCs structure, the proposed mode demultiplexer demonstrates insertion loss less than 0.227 dB in the ON (amorphous) state and the extinction ratios large than 23.28 dB over the C-band. By coupling the access waveguides of the higher-order mode in parallel on both sides of the bus waveguide, the device size can be compact with a footprint of ∼ 7 × 75 µm2, and this design approach can be further extended to enable more higher-order mode multiplexing.

Silicon nitride-based ultra-wideband ultra-long infrared metamaterial absorber with large angle and high absorption

In the study of mid-infrared band long wavelength infrared (LWIR) has attracted the attention of domestic and foreign researchers due to its great role in medical diagnosis and detection. Broadband absorption is also a key index for metamaterial absorption applications. In this paper, a design of a highly absorbing, large-angle ultra-wideband ultra-long infrared metamaterial absorber based on a single-layer square Si3N4 cavity array and an intermediate layer of Si3N4 thin film, as well as metal Ti as the substrate, is proposed. The ultra-long infrared metamaterial absorber has polarization insensitivity under the condition of positive incidence. Numerical simulations show that the effective absorption bandwidth with more than 90% absorption is 11.12 μm in the band range of 7.65–18.77 μm, in which the average absorption reaches 96.54%. Diffraction and impedance matching induced strong absorption and wide bandwidth. We can adjust the absorption performance by changing the structural size of the absorber. In addition, our design has a very wide operating range of incidence angles, and the TM and TE modes maintain ultra-high average absorption levels under 0°-60° incidence angles, it is worth mentioning that the absorption of the absorber can reach 95.08% at an incident angle of 60°. The absorber design proposed in this paper has a simple structure, the material is easily available and inexpensive, and the fabrication process is very simple, which makes it suitable for infrared imaging, medical detection, and thermoselectronic devices.

Multiphysics simulations of a cylindrical waveguide optical switch using phase change materials on silicon

This work presents the design and multiphysics simulation of a cylindrical waveguide-based optical switch using germanium-antimony-tellurium (GST) as an active phase change material. The innovative cylindrical architecture is theoretically analyzed and evaluated at 1550 nm wavelength for telecommunication applications. The dispersion relation is derived analytically for the first time to model the optical switch, while finite element method (FEM) and finite difference time domain (FDTD) techniques are utilized to simulate the optical modes, light propagation, and phase change dynamics. The fundamental TE01 and HE11 modes are studied in detail, enabling switching between low-loss amorphous and high-loss crystalline GST phases. Increasing the GST thickness is found to increase absorption loss in the crystalline state but also slows down phase transition kinetics, reducing switching speeds. A 10 nm GST layer results in competitive performance metrics of 0.79 dB insertion loss, 13.47 dB extinction ratio, 30 nJ average power consumption, and 3.5 Mb/s bit rate. The combined optical, thermal, and electrical simulation provides comprehensive insights towards developing integrated non-volatile photonic switches and modulators utilizing phase change materials.

Advancing electromagnetic field modeling in axially anisotropic media with conformal method in 3D cylindrical coordinate systems

A conformal methodology for solving electromagnetic fields in axially anisotropic media in 3D cylindrical coordinate systems is proposed for the investigation of high-power microwave devices filled with such media. This method leverages the material properties of axially anisotropic media and employs the finite integral technique for solution. A simplified conformal algorithm is utilized for the boundaries of the computational region, extending the traditional conformal method for axially anisotropic media in 3D cylindrical coordinates. The proposed methodology is validated through simulations of TM01 and TE01 mode propagation in a circular waveguide filled with the medium. Subsequently, the method is integrated into particle-in-cell simulations, and an X-band relativistic backward wave oscillator filled with an axially anisotropic medium exhibiting azimuthal conductivity is numerically modeled. The results demonstrate that the medium with azimuthal conductivity effectively mitigates asymmetric modes in the relativistic backward wave oscillator, aligning with published literature. This study offers technical insights for research on high-power microwave devices incorporating axially anisotropic media, potentially facilitating the development of innovative microwave devices with enhanced performance characteristics.

Polarization-insensitive multimode interference coupler based on a subwavelength grating structure.

A multimode interference (MMI) coupler is one of the basic components for photonic integrated circuits. However, MMI couplers realized by conventional waveguides are polarization sensitive, which is undesired for many applications, such as optical switches and communications. In this Letter, we propose a polarization-insensitive MMI coupler on a 220-nm silicon-on-insulator platform by constructing different effective interference lengths for TE and TM modes assisted with subwavelength grating structures. The designed MMI coupler shows an excess loss of <0.24(0.43) dB and a power imbalance of <0.6(0.5) dB for the TE(TM) mode over the wavelength range of 1.5-1.6 µm in theory. Experimentally, the fabricated MMI exhibits low excess loss <0.64(0.53) dB and power imbalance <1(0.85) dB for the TE(TM) mode over a wavelength range of 1.55-1.61 µm.

Millimeter‐wave end‐fire dual‐polarized frequency scanning antenna using LTCC technology

AbstractThis letter proposes a millimeter‐wave dual‐polarized (DP) end‐fire frequency scanning antenna utilizing low temperature co‐fired ceramic (LTCC) technology. The antenna features DP radiating elements, each comprising a quasi‐Yagi antenna for horizontal polarization (H‐pol) and a pyramidal horn antenna for vertical polarization (V‐pol). These elements are excited via a mode‐composited transmission line (MCTL), integrating substrate integrated coaxial line (TEM mode) with substrate integrated waveguide (TE10 mode). To mitigate phase imbalances between polarizations during beam scanning, a delay line is embedded in each quasi‐Yagi element, ensuring consistent scanning ranges for the two polarizations. Furthermore, the implementation of amplitude weighting in the feeding networks contributes to the enhancement of antenna efficiency. A 1 × 8‐element prototype was fabricated and its performance is assessed. The results show closely matched beam scanning ranges for the two polarizations (±28° for H‐pol and −30° to +34° for V‐pol) across the 26–29 GHz frequency band, with a measured maximum peak gain exceeding 9.2 dBi for both polarizations. The proposed design emerges as a promising candidate for compact mmW frequency scanning front‐end antenna systems.

Intrinsic polarization conversion and avoided-mode crossing in X-cut lithium niobate microrings

Compared with well-developed free space polarization converters, polarization conversion between TE and TM modes in the waveguide is generally considered to be caused by shape birefringence, like curvature, morphology of waveguide cross section and scattering. Here, we study the polarization conversion mechanism in 1-THz-FSR X-cut lithium niobate microrings with multiple-resonance condition, that is the conversion can be implemented by birefringence of waveguides, which will also introduce an avoided-mode crossing. In the experiment, we find that this mode crossing results in severe suppression of one sideband in local nondegenerate four-wave mixing and disrupts the cascaded four-wave mixing on this side. Simultaneously, we propose one two-dimensional method to simulate the eigenmodes (TE and TM) in X-cut microrings, and the mode crossing point. This work will provide one approach to the design of polarization converters and simulation for monolithic photonics integrated circuits, and may be helpful to the studies of missed temporal dissipative soliton formation in X-cut lithium niobate rings.

On-chip integrated few-mode erbium–ytterbium co-doped waveguide amplifiers

We propose for the first time, to the best of our knowledge, an on-chip integrated few-mode erbium–ytterbium co-doped waveguide amplifier based on an 800 nm thick Si3N4 platform, which demonstrates high amplification gains and low differential modal gains (DMGs) simultaneously. An eccentric waveguide structure and a co-propagating pumping scheme are adopted to balance the gain of each mode. A hybrid mode/polarization/wavelength-division (de)multiplexer with low insertion loss and crosstalk is used for multiplexing and demultiplexing in two operation wavebands centered at 1550 nm and 980 nm, where the light in these two bands serves as the signal light and pump light of the amplifier, respectively. The results demonstrate that with an input signal power of 0.1 mW, TE0 mode pump power of 300 mW, and TE1 mode pump power of 500 mW, the three signal modes (TE0/TM0/TE1) all exhibit amplification gains exceeding 30 dB, while maintaining a DMG of less than 0.1 dB.

Расчет фильтра для выделения излучения третьей гармоники циклотронной частоты сильноточного гиротрона Ka-диапазона

The calculation of a mode filter for a circular waveguide designed to isolate a high-order TE mode consistent with its field has been carried out. A theoretical justification and results of electrodynamic modeling are given using the example of identifying the third harmonic TE12,4 mode of the gyrotron against the background of predominant radiation at the fundamental cyclotron harmonic in the TE4,2 mode.

Highly efficient fiber to Si waveguide free-form coupler for foundry-scale silicon photonics

As silicon photonics transitions from research to commercial deployment, packaging solutions that efficiently couple light into highly compact and functional sub-micrometer silicon waveguides are imperative but remain challenging. The 220 nm silicon-on-insulator (SOI) platform, poised to enable large-scale integration, is the most widely adopted by foundries, resulting in established fabrication processes and extensive photonic component libraries. The development of a highly efficient, scalable, and broadband coupling scheme for this platform is therefore of paramount importance. Leveraging two-photon polymerization (TPP) and a deterministic free-form micro-optics design methodology based on the Fermat’s principle, this work demonstrates an ultra-efficient and broadband 3-D coupler interface between standard SMF-28 single-mode fibers and silicon waveguides on the 220 nm SOI platform. The coupler achieves a low coupling loss of 0.8 dB for the fundamental TE mode, along with 1 dB bandwidth exceeding 180 nm. The broadband operation enables diverse bandwidth-driven applications ranging from communications to spectroscopy. Furthermore, the 3-D free-form coupler also enables large tolerance to fiber misalignments and manufacturing variability, thereby relaxing packaging requirements toward cost reduction capitalizing on standard electronic packaging process flows.

Efficient ultra-broadband low-resolution astrophotonic spectrographs

Broadband low-resolution near-infrared spectrographs in a compact form are crucial for ground- and space-based astronomy and other fields of sensing. Astronomical spectroscopy poses stringent requirements including high efficiency, broad band operation (&gt; 300 nm), and in some cases, polarization insensitivity. We present and compare experimental results from the design, fabrication, and characterization of broadband (1200 - 1650 nm) arrayed waveguide grating (AWG) spectrographs built using the two most promising low-loss platforms - Si3N4 (rectangular waveguides) and doped-SiO2 (square waveguides). These AWGs have a resolving power (λ/Δλ) of ∼200, free spectral range of ∼ 200-350 nm, and a small footprint of ∼ 50-100 mm2. The peak overall (fiber-chip-fiber) efficiency of the doped-SiO2 AWG was ∼ 79% (1 dB), and it exhibited a negligible polarization-dependent shift compared to the channel spacing. For Si3N4 AWGs, the peak overall efficiency in TE mode was ∼ 50% (3 dB), and the main loss component was found to be fiber-to-chip coupling losses. These broadband AWGs are key to enabling compact integrations such as multi-object spectrographs or dispersion back-ends for other astrophotonic devices such as photonic lanterns or nulling interferometers.

Compact adiabatic mode (de)multiplexer using a subwavelength grating waveguide in the silicon-on-insulator platform

Mode-division multiplexing technology holds great promise for addressing the ever-increasing demand for data transmission capacity. This paper proposes a compact adiabatic mode (de)multiplexer [(de)MUX] using a subwavelength grating (SWG) waveguide in the silicon-on-insulator platform, with optimization for the TE0-TE1 and TE0-TE2 mode (de)MUXs. By introducing an SWG waveguide, the coupling strength of waveguides can be enhanced, making it possible for the realization of more compact adiabatic mode (de)MUXs. The adiabatic evolution lengths for TE0-TE1 and TE0-TE2 mode (de)MUXs are only 10 µm and 17.5 µm, respectively. The numerical simulation shows that the operating bandwidth of the proposed device is beyond 200 nm. For the TE0-TE1 mode (de)MUX, the insertion loss and mode crosstalk of TE0-TE1 mode conversion within the whole wavelength range of 1450–1650 nm are less than 0.25 dB and −32.0dB, respectively. For the TE0-TE2 mode (de)MUX, the insertion loss and mode crosstalk of TE0-TE2 mode conversion within the entire bandwidth are less than 0.26 dB and −27.4dB, respectively. The TE0-TE1 and TE0-TE2 mode (de)MUXs can be cascaded to form a three-mode (de)MUX. For TE0-TE0, TE0-TE1, and TE0-TE2 processes within the entire bandwidth, the mode crosstalks are less than −33.5dB, −26.1dB, and −25.8dB, respectively. The device is scalable to the conversion of TE0 mode to higher-order mode.

High performance polarizer on thin-film lithium niobate with width-tapered Euler bending.

In this Letter, we propose and demonstrate an integrated polarizer on thin film lithium niobate (TFLN). The polarizer consists of a width-tapered 180° Euler bending waveguide featuring thin thickness and bilevel mode convertors with silica cladding. Notably, the TE0 mode is efficiently confined in the waveguide, while the TM0 mode confronts significant bending losses. The measurements reveal that the excess loss remains below 1.5 dB, and the extinction ratio surpasses 19 dB within a working bandwidth spanning from 1480 to 1578 nm. The proposed polarizer holds considerable promise for enhancing polarization handling within TFLN photonic circuits.

An ultra-thin optical polarizer based on weyl semimetals

Recently, Weyl semimetals have been extensively studied due to their unique optical responses, especially in the mid-infrared region. However, the possibility of developing optical polarizers based on Weyl semimetals remains unexplored. In this paper, under the Voigt geometry, we numerically show that an ultra-thin Weyl semimetal film with thickness L = 100 nm can achieve an impressive polarization extinction ratio (more than 40 dB) with a wide acceptance angle. Further, the proposed sandwich structure can effectively adjust the position of the TE mode transmission peak alone, thus obtaining lower insertion loss (from 0.06 dB to 0.03 dB) and wider acceptance range of angle (from 49.5∘ to 71∘). The proposed gradient Fermi level structure eliminates the Fabry-Perot cavity resonance, thus resulting a wider bandwidth (approximately 60 % improvement). Our proposed ultra-thin and wide-angle polarizer may have potential applications in optical communication and omnidirectional polarization detectors.

Temperature-compensated high-sensitivity refractive index, liquid level and PH sensing realization enabled by a small-period microfiber long period grating cascaded with microfiber Bragg grating

Conventional reported optical fiber sensors could not have both good temperature-compensated characteristic and high PH sensing sensitivity. In this study, we proposed and fabricated a small-period microfiber long period grating (SP-mFLPG) cascaded with a line-by-line microfiber Bragg grating (mFBG) by using femtosecond (fs) laser directly writing technique for high-sensitivity temperature-compensated sensing refractive index(RI), liquid level(LL), PH value. To be the different from traditional LPG devices, the temperature sensitivities of SP-mFLPG was measured as −8.61 pm/℃ owing to the strong coupling occurred between the fundamental mode of TE11 mode and the higher-order mode of TE111, which could be compensated with the mFBG device with a temperature sensitivity of 7.85 pm/℃. On the basis of this temperature-insensitive sensing strategy, our proposed SP-mFLPG sensor can sense RI, LL and pH with high sensitivities of 866.343 nm/RIU, 7.224 nm/mm, −5.70 nm/PH, respectively. Our obtained PH sensitivity is much higher than numerous reported state-of-the-art optical fiber PH sensors. Thus, our proposed optical microfiber device can be found potential applications in real-time measuring some important biochemical reaction procedures.

Ultra-low loss compact active TM mode pass polarizer using phase change material in silicon waveguide

An active low-loss transverse magnetic (TM) pass polarizer, based on the phase change material (Ge2Sb2Te5), is proposed. The proposed polarizer is based on silicon-on-insulator technology that consists of a silicon waveguide that incorporates a thin layer of Si3N4 placed in-between GST. Enhancing the interaction between light and GST is achieved by strategically placing a double-layer GST adjacent to the slot waveguide. The polarizer’s tunability, on the other hand, depends on the shift in the refractive index (RI) of GST as it transitions between its crystalline and amorphous phases. By optimizing the structure, the polarizer exhibits negligible loss for both modes in the amorphous phase, and with the change of phase to crystalline, the loss of TE mode is more than 8 dB. In contrast, the loss of TM is less than 0.05 dB with a high ER of 21.82 dB, propagation length of 79.89 µm and Figure of merit reaches up to 108 at 1550 nm. Due to the combination of these performance parameters, the suggested active TM pass polarizer is an appealing and effective device for various photonic applications. In addition, the fabrication technique of the proposed active TM pass polarizer is explained.