Tape Test Research Articles

Grafts of hydrogel-embedded electrically stimulated subventricular stem cells into the stroke cavity improves functional recovery of mice

The major aim of stroke therapy is to stimulate brain repair and improve behavioral recovery after cerebral ischemia. One option is to stimulate endogenous neurogenesis in the subventricular zone and direct the newly formed neurons to the damaged area. However, only a small percentage of these neurons survive, and many do not reach the damaged area, possibly because the corpus callosum impedes the migration of subventricular zone-derived stem cells into the lesioned cortex. A second major obstacle to stem cell therapy is the strong inflammatory reaction induced by cerebral ischemia, whereby the associated phagocytic activity of brain macrophages removes both therapeutic cells and/ or cell-based drug carriers. To address these issues, neurogenesis was electrically stimulated in the subventricular zone, followed by isolation of proliferating cells, including newly formed neurons, which were subsequently mixed with a nutritional hydrogel. This mixture was then transferred to the stroke cavity of day 14 post-stroke mice. We found that the performance of the treated animals improved in behavioral tests, including novel object, open field, hole board, grooming, and “time-to-feel” adhesive tape tests. Furthermore, immunostaining revealed that the stem cell marker nestin, the neuroepithelial marker Mash1, and the immature neuronal marker doublecortin-positive cells survived in the transplanted area for 2 weeks, possibly due to reduced phagocytic activity and supportive angiogenesis. These results clearly indicate that the transplantation of committed subventricular zone stem cells combined with a protective nutritional gel directly into the infarct cavity after the peak of stroke-induced neuroinflammation represents a feasible approach to improve neurorestoration after cerebral ischemia.

Evaluation of carbonated fossil bone consolidation by induction of calcium hydroxide nanoparticles in a Miocene Cheirogaster richardi specimen

In this research, calcium hydroxide nanoparticles, as a carbonate consolidation method, have been evaluated on carbonated fossil bone samples from decontextualized Cheirogaster richardi specimens’ fragments.The main objective was to assess whether the treatment improved fossil bone surface cohesion and mechanical strength by creating a consolidated carbonate matrix in fossil substrate. Treatment penetration capacity and chemical compatibility without causing observable alterations in substrate porosity and external appearance were considered as significant questions to be assessed. Samples were analysed both before and after treatment using scanning electron microscopy, spectrophotometry, weight measurement control, water absorption assessment, conductivity and pH measurement, Vickers microindentation and tape testing. During analysis and evaluation, changes in fossil bone after treatment compared to its original condition have been taken into account.Results point out that hardness and cohesion increased significantly after treatment, bonding together disaggregated particles via a calcium carbonate micrometric layer, with almost negligible changes in surface topography and colour. In addition, calcium hydroxide nanoparticles penetration depth was remarkable. Conductivity, pH and weight hardly changed and porosity reduction was observed without complete pore blockage. To sum up, the treatment was effective and suitable for carbonate fossil bones having a highly compatibility with carbonate fossil bones substrates.

High-precision silver electrode based on PEN substrate with robust mechanical performance

Wearable electronics are becoming more and more popular, and in order to ensure the safety and accuracy of wearable electronics, the requirements for the refinement and stability of flexible electrodes are getting higher and higher. The reduction of the amount of ink jet and the reduction of surface charge density and electrostatic stress near the nozzle hole can significantly improve the jetting state of the ink. And nozzle voltage is a key factor that affects them. The spreading of ink droplets on the substrate and the formation of a specific pattern is a dynamic process, which is closely related to the properties of the substrate and the state of the ink droplets. In this paper, PEN is used as the substrate to print silver electrode, with its good thermal stability and good mechanical properties. In order to solve these problems and improve the accuracy of the electrode pattern on PEN substrate, a joint control method of ink drop spacing and nozzle voltage is proposed. It is found that the accuracy of the pattern increases with the increase of the drop spacing. At 45 μm, 90.91 % of the pattern accuracy with the ideal pattern can be achieved. As the nozzle voltage decreases, so does the satellite spot. And at 25 V, it can achieve satellite-free spot printing. Because this method avoids the adjustment of ink properties and the regulation of voltage waveform, this advancement provides a simpler solution for patterned high-precision printed silver electrodes based on flexible substrates. In addition, a silver electrode with a resistivity of 3.43 μΩ·cm was obtained at an annealing temperature of 160 °C. The resistivity change of the electrode only 7.58 % under 5000 times of bending. This is very rare in flexible electrodes.The silver film on the PEN substrate exhibited excellent adhesion under the tape test. XPS depth profiling was used to characterize the elemental states of the films at different depths. The results indicated that the coordination bond between the PEN substrate and the Ag film resulted in good bending resistance, which gives a persuasive explanation for the first time. This result is also due to the precise handling of the film, which also results in a homogeneous distribution of the film. It solves the problem of poor adhesion of silver electrodes based on other substrates or other preparation methods. Therefore, silver electrodes based on PEN substrates have a broad application prospect in the field of flexible wearable electronics.

Influence of laser treatment on the adhesion force of metallized carbon fiber reinforced polymer (CFRP) composite

Carbon fiber reinforced polymer (CFRP) is an engineering composite material with excellent performance. After metallization, the CFRP composite exhibits unique properties such as electromagnetic shielding and high electrical conductivity. In this study, we utilized laser treatment process to enhance the adhesion strength of the copper layer electrolessed on CFRP composite. The surface microstructure of CFRP and the copper layer was determined using an optical microscope, and the adhesion force of the copper layer on CFRP composite was measured through 3M tape and pull-out tests. The results indicate that with an increase in the number of laser treatment cycles, the trenches depth on the surface of CFRP composite also increases, leading to high surface roughness and thus enhancing the adhesion strength between the copper layer and the composite. The adhesion state of the copper layer on laser-treated CFRP composite can be qualitatively classified as grade 5B. Additionally, both mechanical cutting and laser treatment can improve the adhesion strength of the samples. The samples treated by mechanical cutting and the laser scan with ±45° exhibit the highest adhesion strength of 5.48 MPa. This is 415 % higher than that of the untreated sample, with a minimum damage area after pull-out testing, approximately 10 %. Compared to the sandblasting pretreatment process, the adhesion strength of the sample by laser treatment increased by 119 %.

The Optimal Parameter for Coating ZnO Nanoparticle on Orthodontic Molar Tube by Electrophoretic Deposition Method (An Invitro Study)

The fixed orthodontic appliance may enhance devious pathogens and increase biofilm accumulation around the orthodontic molar tube (OMT) surface, which may cause demineralization of the tooth surface. However, the stainless-steel OMT coated with ZnO nanoparticles may enhance antimicrobial efficacy and reduce biofilm accretion. The study aimed to identify the optimal parameter for coating orthodontic molar tubes with antimicrobial ZnO nanoparticles by the electrophoretic deposition (EPD)cell. 36 orthodontic molar tubes were included in this study. The coating process was carried out using an EPD cell. Various concentrations (7.5, 10, 20, 33) g/L of ZnO nanoparticles suspension were conducted in this study, in addition to multiple times and voltages. After the coating process, the samples were left to dry for 24 hours at room temperature. To confirm the coating and adhesion a qualitative tape test and the Scanning Electron microscope were used to study the morphological, topographical, and surface characteristics and the size of nanoparticles on the surface of the coated OMT. The innovative ZnO nanoparticles exhibit promising antibacterial properties against oral pathogens, leading to a decrease in plaque buildup, which may decrease tooth cavities and gingival irritation through orthodontic treatment. There was an increase in nanoparticle surface adhesion on the orthodontic molar tube surface at 2 mins deposition time while reduced surface adhesion as increased deposing time. The coating process was verified at a currency voltage of 30V, reducing nanoparticle agglomeration. A concentration of 10g/L of ZnO suspension shows the most stable and homogenous suspension.

Exploring the potential of Gigantochloa levis and Gigantochloa scortechinii bamboo species for plybamboo production

Gigantochloa levis and G. scortechinii bamboo species were evaluated as material for plybamboo production. Plybamboo was composed of three layers with 12 mm thickness and used phenol formaldehyde (PF) as their binder. Representative samples were cut and tested for bonding, physical, mechanical, and finishing properties. Results indicated that G. levis plybamboo exhibited higher bending strength property compared to G. scortechinii plybamboo, as indicated by its higher modulus of rupture (121 N/mm2) and modulus of elasticity (16300 N/mm2). The G. levis plybamboo also displayed higher bond shear strength and was dimensionally stable compared to G. scortechinii plybamboo. The finishing properties revealed that all coatings performed well in the cross-cut tape and pull-off tests. Notably, plybamboo from both bamboo species showed excellent coating film adhesion. Based on minimum standard requirement, results revealed that both bamboo species were suitable to be used in plybamboo production for general use. The findings showed that those species are valuable renewable natural resources for plybamboo production and had potential to be utilized as a substitute for wood in board production.

Comparison of diagnostic methods for laboratory diagnosis of the zoonotic tapeworm Dipylidium caninum in cats

The tapeworm Dipylidium caninum is the most widely distributed cestode infecting dogs, cats, and sometimes humans, worldwide. The diagnosis of the infection caused by D. caninum is achieved via the visualization of proglottids in feces or with traditional microscopic tests, but both lack sensitivity. The present study has evaluated and compared the diagnostic performance of a PCR protocol on different feline biological samples to detect D. caninum. A sample of feces, a Scotch tape test from the perianal area, and a rectal swab were collected from a total of 100 privately owned cats from Italy and Greece. All fecal samples were subjected to macroscopic examination and to floatation. Based on the results of the above tests the cats were divided in three groups, i.e. (i) cats positive for D. caninum (regardless of positivity for other endoparasites (Group A; n = 50 cats), (ii) cats negative for D. caninum but infected by other helminths (Group B; n = 25 cats), and (iii) cats negative for intestinal endoparasites (Group C; n = 25 cats). For each sample, the DNA was extracted from feces, floatation supernatant, Scotch tape test and rectal swabs and subjected to PCR. For 33 cats from Group A, at least one sample type scored positive at PCR. Of these, all were PCR-positive in the floatation aliquot, while nine and one cats were positive by PCR on feces and Scotch tape test, respectively. Swabs were negative by PCR for all the cats. None of the samples from cats of Groups B and C was positive by any PCR. Sequences obtained from amplicons generated from samples of cats enrolled in Italy had 99–100 % identity with the recently described D. caninum feline genotype. The data presented here suggest that PCR could be a useful tool for diagnosing D. caninum infections, under certain circumstances, e.g. when proglottids are unidentified, unseen or overlooked, even though it has limitations, e.g. false negative results due to fecal PCR inhibitors, uneven distribution of parasitic elements, or to intermittent proglottid and/or egg shedding. Thus, it may not be, currently, the best diagnostic choice for dipylidiosis.

What About Water? Implications for Body Composition Assessment in Military Personnel.

Sergi, TE, Roberts, BM, and Heileson, JL. What About Water? Implications for Body Composition Assessment in Military Personnel. J Strength Cond Res 38(9): e534-e540, 2024-Body composition standards ensure service members maintain physical fitness, wellness, and support mission readiness. Anthropometric techniques (i.e., height/mass, circumference-based "tape test") have been the primary screening and percent body fat (%BF) assessment method in military personnel for about 4 decades. Recently, the Army and Marine Corps have implemented more advanced body composition assessment methods, such as air displacement plethysmography (ADP), multifrequency bioelectrical impedance analysis (MF-BIA), and dual-energy x-ray absorptiometry (DXA), to serve as supplemental %BF assessment after failing the tape test. Although supplemental assessments are intended to improve on the accuracy and precision of the tape test, preassessment standardization, specifically regarding acute water ingestion (AWI), is lacking. Thus, the purpose of this narrative review was to (a) summarize the available literature regarding the influence of AWI on body composition estimates derived from ADP, MF-BIA, and DXA and (b) provide evidence-based recommendations for researchers and practitioners. Studies indicate that AWI increases %BF estimates with ADP (4 of 6 [4/6] observations) and MF-BIA (6/7), whereas AWI increases muscle mass (6/6) and likely decreases %BF (2/3) when obtained by DXA. In conclusion, ADP, MF-BIA, and DXA are susceptible to confounding from AWI, leading to inaccurate body composition estimates that may negatively affect the careers of military personnel. Based on the findings from this narrative review, military practitioners and researchers should (a) follow manufacturer guidelines for calorie intake [food and fluid] and exercise avoidance, (b) conduct urine-specific gravity testing [if possible], and (c) limit AWI to <250 ml before assessment.

Photocatalytic coatings with self-cleaning properties for indoor air treatment

In this work we have studied the photocatalytic and self-cleaning properties of TiO2 layers immobilized on polymeric panels, as passive elements for air treatment. In order to achieve easy scale-up technologies for the preparation of coatings, roller-coating technique was selected, comparing the results with those prepared by dip-coating. Composites were characterized by SAXRD, UV–Vis DRS spectroscopy, profilometry, N2 adsorption–desorption, SEM and AFM microscopy. The adherence of the coating was evaluated according the ASTM D3359 standard adhesive tape test. The photocatalytic properties of the materials were evaluated by the photodegradation of trichloroethylene or formaldehyde, as model volatile organic compounds, in the gas phase. The hydrophilic-hydrophobic properties were measured by studying the in-situ variation of the water contact angle with time and UV-A irradiation. Moreover, the self-cleaning properties were analyzed according to ISO 27448:2009 for oleic acid removal. Although coatings of approximately ca. 250 nm layer thickness can be prepared by both techniques, roller-coating allows the material deposition with a coral-like structure in a single and simple step. Surface roughness was promoted by roller process. The developed materials present high photocatalytic performance for the elimination of both model pollutants in the gas phase. Aging tests under outdoor conditions and Scotch tape test show the stability and resistance of the coatings. In-situ irradiation measurements show the superhydrophilic character of the coatings. Water contact angle lower than 10 ° after 300 min of UV-A irradiation was achieved for oleic acid removal. The combination of TiO2 nanoparticles with different crystal structures and sizes improves the photocatalytic performance. A correlation between the ability for pollutants degradation in gas phase and the self-cleaning properties (in-situ or oleic acid measurements) was determined.

Interlayer design for strong adhesion in the double-layer flexible copper clad laminate via HiPIMS deposition

By designing different interlayers (Al, Si/SixNy and Cr interlayer) and oxygen plasma pretreatment of the substrate, strong adhesion was realized for the double-layer flexible copper clad laminate on polyimide (PI) substrate via high power impulse magnetron sputtering (HiPIMS) technology. The microstructures and properties of Cu films on PI substrate were characterized by an X-ray powder diffractometer (XRD), X-ray photoelectron spectroscope (XPS), atom force microscopy (AFM), scanning electron microscope (SEM), nano-scratch test, scotch tape test and four-probe detector. With the introduction of interlayer and oxygen plasma pretreatment, the critical load of Cu film (300 nm thick) peaked at 43.5 mN and the sheet resistance ranged from 124 to 227 mΩ/sq. The oxygen plasma pretreatment resulted in the drastic oxidation to generate functional groups on the PI substrate surface, which contributed to the improvement of adhesion strength by chemical interaction in terms of the film with Si/SixNy or Cr interlayer. Besides, for the Cu film with Si/SixNy interlayer, the resistance against copper diffusion by the SixNy layer can also promote the enhancement of adhesion strength.

Characterization of a Food‐Safe Colorimetric Indicator Based on Black Rice Anthocyanin/PET Films for Visual Analysis of Fish Spoilage

ABSTRACTThe safety of food products is of prime importance for consumers and manufacturers. Many means can be used to validate a food product's safety before it is consumed. This study is about the preparation, characterization and evaluation of a generally recognized as safe (GRAS) sensitive colorimetric sensor that detects volatile gases (TVB‐N) resulting from fish spoilage, thus indicating the pH variation of packaged fish products. This is performed by coating a thin layer of ink sensors on the surface of the supporting matrix (corona‐treated PET). Various visual pH indicators were prepared based on black rice anthocyanin as an FDA‐approved dye. Black rice, which contains more than 80% cyanidin‐3‐glucoside, is the most prevalent anthocyanin component. Because of its low toxicity and high concentration, it can be utilized as a natural food colourant. pH indicators based on black rice can show distinct colours in various pH: from red (low pH) to violet (4–6) and deep purple/blue (6–7), blue (7–9) to yellowish/light brown (9–13) throughout the acid–base reaction by the analyte. The ink formulation was prepared by incorporating a binder system (PVOH‐PEG) for higher surface wettability, a crosslinking agent (citric acid) for higher adhesion, an antifoaming agent (natural vanillin) and acetic acid as a pH fixing agent. Corona treatments affected substrate surface chemistry in this study. The samples with thermal treatment passed the ASTM D3330 tape test, the 8000 passages for dry sponge and the 25 passages for wet sponge through the abrasion method. Anthocyanin concentration in formulated ink based on calculation by UV–vis spectra is 0.240 mg/100 g. Sensitivity tests towards TVB‐N gases were carried out at a temperature of 4°C to evaluate the performance of colorimetric films with formulated ink along with thermal treatment (temperature: 165°C, time: 5 min) using the volatile gases emitted by the fish sample inside the package.

Design and realization of versatile durable fluorine-free anti-corrosive coating with robust superhydrophobicity

Bio-inspired superhydrophobic coatings are of increasing interest in marine corrosion protection due to their superior barrier and shielding effects. However, some difficult problems like weak mechanical strength, the use of costly and toxic reagents, and intricate preparation processes have long hindered the practical application of the superhydrophobic coatings. Herein, a durable, self-cleaning and anti-corrosion superhydrophobic coating based on epoxy resin matrix was successfully fabricated, avoiding the use of fluorine materials. The prepared coating possessed excellent superhydrophobicity and was applicable to a variety of substrates, which was ascribed to the effect of modified kaolin particles on lowering surface energy. Through SEM and LSCM, the superhydrophobic coatings manifested the morphology feature of "hills+mountain", which could store air to reduce solid-liquid contact. The prepared coating had been proven to have greater impedance modulus and charge transfer resistance by EIS test, and displayed outstanding durability in salt spray environment compared with pure epoxy coating. In addition, the sandpaper abrasion, standard cross-cut tape and self-cleaning tests indicated that the superhydrophobic coatings satisfied robust mechanical stability and excellent resistance to contaminants, laying the foundation for the application of superhydrophobic coating in practical environment.

Robust and Superhydrophobic Polydimethylsiloxane/Ni@Ti3C2Tx Nanocomposite Coatings with Assembled Eyelash-Like Microstructure Array: A New Approach for Effective Passive Anti-Icing and Active Photothermal Deicing.

To solve the problem of ice condensation and adhesion, it is urgent to develop new anti-icing and deicing technologies. This study presented the development of a highly efficient photothermal-enhanced superhydrophobic PDMS/Ni@Ti3C2Tx composite film (m-NMPA) fabricated cost-effectively and straightforwardly. This film was fabricated utilizing PDMS as a hydrophobic agent, adhesive, and surface protector, while Ni@Ti3C2Tx as a magnetic photothermal filler innovatively. Through a simple spraying method, the filler is guided by a strong magnetic field to self-assemble into an eyelash-like microstructure array. The unique structure not only imparts superhydrophobic properties to the surface but also constructs an efficient "light-capturing" architecture. Remarkably, the m-NMPA film demonstrates outstanding superhydrophobic passive anti-icing and efficient photothermal active deicing performance without the use of fluorinated chemicals. The micro-/nanostructure of the film forms a gas layer, significantly delaying the freezing time of water. Particularly under extreme cold conditions (-30 °C), the freezing time is extended by a factor of 7.3 compared to the bare substrate. Furthermore, under sunlight exposure, surface droplets do not freeze. The excellent photothermal performance is attributed to the firm anchoring of nickel particles on the MXene surface, facilitating effective "point-to-face" photothermal synergy. The eyelash-like microarray structure enhances light-capturing capability, resulting in a high light absorption rate of 98%. Furthermore, the microstructure aids in maintaining heat at the uppermost layer of the surface, maximizing the utilization of thermal energy for ice melting and frost thawing. Under solar irradiation, the m-NMPA film can rapidly melt approximately a 4 mm thick ice layer within 558 s and expel the melted water promptly, reducing the risk of secondary icing. Additionally, the ice adhesion force on the surface of the m-NMPA film is remarkably low, with an adhesion strength of approximately 4.7 kPa for a 1 × 1 cm2 ice column. After undergoing rigorous durability tests, including xenon lamp weathering test, pressure resistance test, repeated adhesive tape testing, xenon lamp irradiation, water drop impact testing, and repeated brushing with hydrochloric acid and particles, the film's surface structure and superhydrophobic performance have remained exceptional. The photothermal superhydrophobic passive anti-icing and active deicing technology in this work rely on sustainable solar energy for efficient heat generation. It presents broad prospects for practical applications with advantages such as simple processing method, environmental friendliness, outstanding anti-icing effects, and exceptional durability.

Single‐ and Double‐Layer Embedded Metal Meshes for Flexible, Highly Transparent Electromagnetic Interference Shielding

AbstractSimulation and experimental studies are carried out on single‐layer and double‐layer embedded metal meshes (SLEMM and DLEMM) to assess their performance as transparent electromagnetic interference (EMI) shielding. The structures consist of silver meshes embedded in polyethylene terephthalate (PET). As a transparent electrode, SLEMMs exhibit a transparency of 82.7% and a sheet resistance of 0.61 Ωsq−1 as well as 91.0% and 1.49 Ωsq−1. This performance corresponds to figures of merit of 3101 and 2620, respectively. The SLEMMs achieve 48.0 dB EMI shielding efficiency (SE) in the frequency range of 8–18 GHz (X‐ and Ku‐bands) with 91% visible transmission and 56.2 dB EMI SE with 82.7% visible transmission. Samples exhibit stable performance after 1000 bending cycles with a radius of curvature of 4 mm and 60 tape test cycles. DLEMMs consist of fabricating SLEMM on opposite sides of the substrate where the distance can be varied using a spacer. Simulations are performed to investigate how varying spacer distance between two layers of metal meshes influences the EMI SE. DLEMMs are fabricated and achieved an EMI SE of 77.7 dB with 81.7% visible transmission. SLEMMs and DLEMMs may have a wide variety of applications in aerospace, medical, and military applications.

Revealing the mechanism of interfacial adhesion enhancement between the SiO2 film and the GaAs substrate via plasma pre-treatments

The formation mechanism of a highly adherent silicon dioxide (SiO2) film on gallium arsenide (GaAs) substrate by plasma enhanced chemical vapor deposition (PECVD) is proposed. Ar, N2, and NH3 were used as pre-treatment gas to improve the interfacial adhesion. The interfacial adhesion was measured by the cross-cut tape test. By the measurement of spectroscopic ellipsometry and x-ray photoelectron spectroscopy (XPS), it is revealed that nitrogen plasma pre-treatment had formed a very thin GaN transition layer on the surface, which was responsible for the improvement of interfacial adhesion. XPS depth-profiling further confirmed various pre-treatment gases generate plasma mixtures and form thin film layers with different compositions on the GaAs surface. These layers have a significant impact on the adhesion of the subsequently prepared SiO2 film. The primary mechanism for improving interfacial adhesion is the renovation of the substrate composition via plasma pre-treatment by PECVD, which forms a transition layer of nitrides that eliminates the negative effects of oxides on adhesion. This study reveals the mechanism of interfacial adhesion enhancement between SiO2 film and GaAs substrate, which is of significant importance in fabricating high-performance and reliable semiconductor devices.

Ginsenoside RH1 Improves Neurological Function By Inhibiting Oxidative Stress and Promoting the Expression of Neurotrophic Factors in Cerebral Ischemia-Reperfusion Rats

Ginseng, a valued herb in China, showed efficacies for treatment or prevention of a series of conditions in patients. Ginsenoside Rh1 is the major active component of ginseng. The aim of this study was to investigate the neuroprotective effects of ginsenoside Rh1 on injury of cerebral ischemia-reperfusion in rats. Middle cerebral artery occlusion and reperfusion were performed in male Sprague-Dawley rats. The ischemic stroke rats were treated with ginsenoside Rh1 at dose of 5 mg/kg and 10 mg/kg by gavage. After 7-day treatment, neurological functions of animals were evaluated by adhesive removal tape and beam walking tests. Neuron injury was assessed by immunohistochemical staining. The levels of MDA, BDNF, NGF and activities of SOD, CAT in the ischemic hemisphere were assayed. Treatment with ginsenoside Rh1 for 7 days could significantly improve the neurological functions (P &lt; 0.05)and increase the number of NeuN-positive cells in rats with cerebral ischemia(P &lt; 0.01).Ginsenoside Rh1 decreased significantly MDA level(P &lt; 0.01) and enhanced activitiesof SOD, CAT (P &lt; 0.05 or P &lt; 0.01).Further measurement showed that ginsenoside Rh1 also increased the levels of BDNF, NGF of the ischemic hemisphere(P&lt;0.05 or P&lt;0.01).The present findings demonstrated that ginsenoside Rh1 improved neurological function by inhibiting oxidative stress and promoting the expression of neurotrophic factors after cerebral ischemia-reperfusion.

Pinworm (Enterobius Vermicularis) Infestation: An Updated Review.

Pinworm infestation is an important public health problem worldwide, especially among children 5 to 10 years of age in developing countries with temperate climates. The problem is often overlooked because of its mild or asymptomatic clinical manifestations. The purpose of this article was to familiarize pediatricians with the diagnosis and management of pinworm infestation. A search was conducted in August 2023 in PubMed Clinical Queries using the key terms "Enterobius vermicularis," OR "enterobiasis," OR "pinworm." The search strategy included all clinical trials, observational studies, and reviews published within the past 10 years. Only papers published in the English literature were included in this review. The information retrieved from the above search was used in the compilation of the present article. Enterobiasis is a cosmopolitan parasitosis caused by Enterobius vermicularis. It affects approximately 30% of children worldwide and up to 60% of children in some developing countries. Predisposing factors include poor socioeconomic conditions, inadequate sanitation, poor personal hygiene, and overcrowding. Children aged 5 to 14 years have shown the highest prevalence of enterobiasis.. Egg transmission is mainly by the fecal-oral route. Approximately 30 to 40% of infested patients do not show any clinical symptoms of the disease. For symptomatic patients, the most common presenting symptom is nocturnal pruritus ani. The diagnosis of E. vermicularis infection is best established by the cellophane tape test. The sensitivity of one single test is around 50%; however, the sensitivity increases to approximately 90% with tests performed on three different mornings. If a worm is visualized in the perianal area or the stool, a pathological examination of the worm will yield a definitive diagnosis. As pinworms and eggs are not usually passed in the stool, examination of the stool is not recommended. The drugs of choice for the treatment of pinworm infestation are mebendazole (100 mg), pyrantel pamoate (11 mg/kg, maximum 1 g), and albendazole (400 mg), all of the above-mentioned drugs are given in a single dose and repeated in two weeks. Mebendazole and albendazole are both adulticidal and ovicidal, whereas pyrantel pamoate is only adulticidal. Given their safety and effectiveness, mebendazole and albendazole are currently the best available drugs for the treatment of pinworm infestation. For pregnant women, pyrantel is preferred to mebendazole and albendazole. Treatment of all household members should be considered, especially if there are multiple or repeated symptomatic infections because reinfection is common even when effective medication is given. In spite of effective treatment of pinworm infestation, recurrences are common. Recurrences are likely due to repeated cycles of reinfection (particularly, autoinfection) because of the short life span of adult pinworms. Good personal hygiene, such as frequent handwashing, especially after bowel movements and before meals, clipping of fingernails, avoidance of finger-sucking, nail-biting, and scratching in the anogenital area, are important preventive measures. Treatment of all household members should be considered, especially if there are multiple or repeated symptomatic infections.

Construction of A Physical Fitness Test Battery for Middle-Aged Women

Proper measuring tools can provide the exact information about an individual’s fitness level. The purpose of the study was to construct a suitable physical fitness test battery and to develop norms for middle-aged women in the Indian population. A total number of 405 middle-aged Indian women of 40-59 years were selected from three basic occupations of homemaking, office job, and manual labor. They were divided into two groups 40-49 years (n=230) and 50-59 years (n=175). The selected physical fitness variables for the construction of the physical fitness test battery were strength, strength endurance, agility, flexibility, balance, coordination, gait velocity, and cardiovascular endurance, which were measured by the standard and valid tests such as hand grip dynamometer, wall squat test, figure of eight-run test, sit and reach test, one leg stand test, plate tape test, and 6 min walk test respectively. Descriptive statistics, normality of the data, Pearson product-moment correlation, and Percentile score were calculated by SPSS version 21. Cajori’s 5-grade evaluation norms were applied. The External validity of the newly constructed test battery was examined by using Eviews software version 9. Results revealed that the obtained data was normal and the selected variables were highly correlated. The Percentile scale revealed that the score from P0 -P100 for each variable for both the groups and grading was expressed in five grades such as excellent, good, average, below average, and poor. External validity confirmed the validity of the physical fitness test battery for middle-aged women across the world.

Hybrid inorganic–organic coatings enhancing glass corrosion resistance

This work aims to prepare a functional hybrid organic–inorganic coating on glass using the sol–gel process. The sol–gel coatings are commonly used for changing and/or enhancing optical, chemical and mechanical properties of the substrate glass. The coatings prepared in this work should exhibit high transmittance and good chemical resistance, whereof should be achieved by the combination of default precursor tetraethoxysilane (TEOS) and various functionalized silicon alkoxides 3-(trimethoxysilyl)propyl methacrylate (MEMO) and isobutyl(trimethoxy)silane (IBTMS). Sols were applied on substrate glass via the dip-coating method at different withdrawal speeds. Coatings were dried 1 h at 200 °C in ambient atmosphere. Assessment of transmittance was done by UV-Vis spectrophotometry, chemical resistance was observed by accelerated weathering tests in a humidity chamber, mechanical properties were evaluated with the means of standardized pencil hardness test and cross-cut tape test, and moreover analysis of abrasion resistance was done by model test. The most efficient functionalization was combination of 1% IBTMS + 1% MEMO and functionalization with MEMO up to 2% alone. These coatings showed good resistance against damp heat, they can withstand certain loads of abrasion and concurrently still exhibit high transmittance in the visible spectrum.Graphical

Analysis of coated samples containing hydroxyapatite/multiwalled carbon nanotubes on 2205 DSS substrate

For biomedical applications, hydroxyapatite and carbon nanotubes are currently being applied over duplex stainless steel (DSS) alone in order to increase corrosion resistance and biocompatibility. A composite of hydroxyapatite and multi-walled carbon nanotubes was used to improve biocompatibility, osseointegration, and corrosion resistance on 2205 DSS using electrophoretic deposition. The study investigates the effects of potential and time on the properties of the deposited layer in order to determine electrophoretic deposition factor values that are appropriate. The coating properties and effective groups of the phase resulting from this process are determined by Fourier transform infrared spectroscopy and X-ray diffraction. The antibacterial properties of E. coli bacterial strains are investigated for the coated layer. The adhesion between the hydroxyapatite and multi-walled carbon nanotube layers on the 2205 duplex stainless steel substrate was qualitatively evaluated using the adhesive tape test. It was found that the optimal suspension, which consists of 65 weight percent hydrogen acetate and 35 weight percent multi-walled carbon nanotubes, had a homogeneous morphology, a thick structure, and no cracks when coated at 50 V for two minutes.