Since 2018, TNO has started the development of a next generation Solid Oxide Cell (SOC) electrolyzer technology to provide high performance and low-cost technological options for the electrification of the chemicals and fuels industry. The main emphasis of TNO developments on the SOC technology focuses on 1/ high temperature CO2-electrolysis and co-electrolysis of steam and CO2 for industrial CO2 re-use processes, aiming for green fuels and chemicals generation, and 2/ large scale high temperature steam electrolysis for hydrogen generation in existing industrial infrastructure, like refineries or ammonia plants. The ambition of the SOC technology development program is to assist the whole value chain, from cell manufacturing to end-users, by making the technology economically viable. This can be achieved through cost reduction at both system (< 500 €/kW in 2030) and stack level (< 200 €/kW in 2030), and improved stack lifetime (up to 60,000 hours by 2030). To achieve these performance and economical objectives, TNO focuses its SOC technology R&D activities on 1/ cell and stack development and 2/ techno-economic and business case studies on SOC technology integration in the industrial environment. These activities aim to support SOC technology demonstrations in the industrial environment.In the last two years, new SOC manufacturing and testing infrastructures have been created within TNO to this end. The Faraday Lab, an open innovation lab to develop the SOC technology on cell and stack level, has been realised. A lab-scale manufacturing line located in Petten, the Netherlands, focuses on developing high performance planar electrode- and electrolyte-supported solid oxide cells with cell dimensions up to 30x30 cm2, based on low-cost tape casting and screen-printing manufacturing techniques. Electrochemical testing facilities, including test stations for single cell testing from button cell to potentially 30x30 cm2 cell area and short stack testing up to 1 kW, have been realised at TNO locations in Petten and Delft, the Netherlands. The new test stations have been developed to assess cells and stacks performance and lifetime under steam-, CO2-electrolysis, steam/CO2 co-electrolysis and reversible SOFC/SOE operations. The SOC manufacturing and testing facilities are available for collaborations with industrial and academic partners directly and/or in national and European funding scheme-based collaborations. In addition, since 2020 TNO started the design of the “Field Lab Industrial Electrification”, a testing platform offering the possibility of testing multi-kW to MW size Solid Oxide Electrolyser pilots at the key location of Rotterdam Harbour, where industrial companies can benefit from the process integration possibilities of the SOC technology in an industrial environment.During the conference, an overview of the most recent status of SOC cell and stack developments within TNO will be presented with main emphasis on steam/CO2 co-electrolysis and CO2-electrolysis applications. The status of the cell and stack development, including the R&D efforts on carbon resistant fuel electrode development, cell performance and lifetime improvements and the scale-up of the SOC dimensions up to 30x30 cm2 will be discussed. As highlight for this communication, the first performance results of a fuel electrode-supported cells (10x10 cm2 with an active electrode area of 81 cm2) under steam/CO2 co-electrolysis conditions, aiming towards a syngas composition for methanol synthesis (m= (H2-CO2)/(CO+CO2) =2), are shown in the graph below. Figure 1
Read full abstract
Jul 13, 2023
Luana B.C Cavalcanti + 5
Open Access