Tangential Filtration Research Articles

Purification of crude glycerol derived from biodiesel production process using ceramic membranes: Experimental studies and modeling of flux behavior

Large-scale biodiesel production generates large quantities of glycerol with high impurities levels, and new purification processes are needed to add value to this by-product of biodiesel production. Thus, this study evaluated the application of ceramic membranes for glycerol purification from biodiesel production and the influence of the mean pore diameter of the membrane, pressure, temperature, and the addition of acidified water to the mixture to be purified. The experiments were carried out in a tangential filtration module with ceramic membranes of 5 kDa, 20 kDa, 0.05 μm, and 0.2 μm, varying the pressure by 1, 2, and 3 bar and the temperature by 25, 40, and 60 °C. The results showed that increasing the pressure, average pore diameter and temperature caused an increase in the permeate flux. Furthermore, adding acidified water increased permeate fluxes and glycerol concentrations for all membranes and pressures used. A higher glycerol content (91.13 %) was obtained with the 5 kDa membrane at 3 bar and 60 °C. The traditional fouling mechanism models failed to fit most of the experimental data. On the other hand, the proposed generalized model adequately predicted the experimental permeate flux data for the different types of fouling mechanisms observed.

Intensified production of recombinant vesicular stomatitis virus-based vectors by tangential flow depth filtration

Intensified production of recombinant vesicular stomatitis virus-based vectors by tangential flow depth filtration

Dynamic filtration in baleen whales: recent discoveries and emerging trends

Recent findings have greatly improved our understanding of mysticete oral filtration, and have upended the traditional view of baleen filtration as a simple process. Flow tank experiments, telemetric tag deployment on whales, and other lab and field methods continue to yield new data and ideas. These suggest that several mechanisms arose from ecological, morphological, and biomechanical adaptations facilitating the evolution of extreme body size in Mysticeti. Multiple lines of evidence strongly support a characterization of baleen filtration as a conceptually dynamic process, varying according to diverse intraoral locations and times of the filtration process, and to other prevailing conditions. We review and highlight these lines of evidence as follows. First, baleen appears to work as a complex metafilter comprising multiple components with differing properties. These include major and minor plates and eroded fringes (AKA bristles or hairs), as well as whole baleen racks. Second, it is clear that different whale species rely on varied ecological filtration modes ranging from slow skimming to high-speed lunging, with other possibilities in between. Third, baleen filtration appears to be a highly dynamic and flow-dependent process, with baleen porosity not only varying across sites within a single rack, but also by flow direction, speed, and volume. Fourth, findings indicate that baleen (particularly of balaenid whales and possibly other species) generally functions not as a simple throughput sieve, but instead likely uses cross-flow or other tangential filtration, as in many biological systems. Fifth, evidence reveals that the time course of baleen filtration, including rate of filter filling and clearing, appears to be more complex than formerly envisioned. Flow direction, and possibly plate and fringe orientation, appears to change during different stages of ram filtration and water expulsion. Sixth, baleen’s flexibility and related biomechanical properties varies by location within the whole filter (=rack), leading to varying filtration conditions and outcomes. Seventh, the means of clearing/cleaning the baleen filter, whether by hydraulic, hydrodynamic, or mechanical methods, appears to vary by species and feeding type, notably intermittent lunging versus continuous skimming. Together, these and other findings of the past two decades have greatly elucidated processes of baleen filtration, and heightened the need for further research. Many aspects of baleen filtration may pertain to other biological filters; designers can apply several aspects to artificial filtration, both to better understand natural systems and to design and manufacture more effective synthetic filters. Understanding common versus unique features of varied filtration phenomena, both biological and artificial, will continue to aid scientific and technical understanding, enable fruitful interdisciplinary partnerships, and yield new filter designs.

Production of recombinant vesicular stomatitis virus-based vectors by tangential flow depth filtration

Cell culture-based production of vector-based vaccines and virotherapeutics is of increasing interest. The vectors used not only retain their ability to infect cells but also induce robust immune responses. Using two recombinant vesicular stomatitis virus (rVSV)-based constructs, we performed a proof-of-concept study regarding an integrated closed single-use perfusion system that allows continuous virus harvesting and clarification.Using suspension BHK-21 cells and a fusogenic oncolytic hybrid of vesicular stomatitis virus and Newcastle disease virus (rVSV-NDV), a modified alternating tangential flow device (mATF) or tangential flow depth filtration (TFDF) systems were used for cell retention. As the hollow fibers of the former are characterized by a large internal lumen (0.75 mm; pore size 0.65 μm), membrane blocking by the multi-nucleated syncytia formed during infection could be prevented. However, virus particles were completely retained. In contrast, the TFDF filter unit (lumen 3.15 mm, pore size 2–5 μm) allowed not only to achieve high viable cell concentrations (VCC, 16.4–20.6×106 cells/mL) but also continuous vector harvesting and clarification. Compared to an optimized batch process, 11-fold higher infectious virus titers were obtained in the clarified permeate (maximum 7.5×109 TCID50/mL).Using HEK293-SF cells and a rVSV vector expressing a green fluorescent protein, perfusion cultivations resulted in a maximum VCC of 11.3×106 cells/mL and infectious virus titers up to 7.1×1010 TCID50/mL in the permeate. Not only continuous harvesting but also clarification was possible. Although the cell-specific virus yield decreased relative to a batch process established as a control, an increased space-time yield was obtained.Key points• Viral vector production using a TFDF perfusion system resulted in a 460% increase in space-time yield• Use of a TFDF system allowed continuous virus harvesting and clarification• TFDF perfusion system has great potential towards the establishment of an intensified vector production

Short-Term Effect of Biopolymer-Based Coatings on Surface Hardness and Color of Limestone Exposed to Tropical Outdoor Conditions

It has previously been shown that epilithic bacterial biopolymers used as coatings influenced the physical properties (surface hardness and color change) at different levels and decreased the surface disaggregation of experimental limestone when evaluated at the laboratory level. A short-term study (30 days) was conducted to evaluate the performance under natural conditions of limestone blocks exposed to tropical conditions of a selected bacterial biopolymer (TM1B-488, after the producing bacterium) and a previously unreported Mayan plant biopolymer known as “Escobilla”, Sida rhombifolia (Malvaceae) used in conservation procedures. Surface hardness (Leeb units) and color (L*a*b* coordinates) were measured and statistically tested for two types of limestone blocks (sound and deteriorated limestone). Both biopolymers increased surface hardness, decreased surface disaggregation, and did not alter color. Escobilla polymer is a carbohydrate-rich biopolymer characterized by tangential filtration, global chemical composition, and monosaccharide composition of hydrolyzed polymer. These results indicate that biopolymers of a heteropolysaccharide nature are constituted by some anionic charge residues that could contribute to surface stabilization and consolidation, but compatibility with traditional building materials (mortars) and longer time of exposure (a year) are necessary to fully assess their applicability in the restoration of architectural heritage.

Effects of preconditioning with TNFα and IFNγ in angiogenic potential of mesenchymal stromal cell-derived extracellular vesicles.

Introduction: Mesenchymal stromal cells (MSCs) have demonstrated therapeutic properties both in vitro and in vivo to treat various diseases, including anti-inflammatory, immunomodulatory and pro-angiogenic effects. These therapeutic effects are mediated by their secretome composed of soluble factors and extracellular vesicles (EVs). The composition of EVs reflects the molecular and functional characteristics of parental cells. MSC preconditioning can alter the composition of EVs, thereby influencing their therapeutic potential. Methods: MSCs were subjected to preconditioning with two cytokines, TNFα and IFNγ. Following 24h of preconditioning, MSC-EVs secreted into the culture supernatant were isolated through tangential filtration. Particle concentration and size distribution were measured by nanoparticle tracking analysis, and the surface antigen expression of the EV-specific CD63 was quantified via Enzyme Linked ImmunoSorbent Assay. The angiogenic potential of MSCEVs obtained after preconditioning MSCs was assessed by the analysis of their protein composition and their influence on human umbilical vein endothelial cell (HUVECs) proliferation, migration, and tube-forming ability. Results: Preconditioning with TNFα and IFNγ did not influence the MSC-EV profile but did induce changes in their protein content. Indeed, the expression of pro-angiogenic proteins increased in EVs from preconditioned MSCs compared to EVs from no-preconditioned MSCs. EVs from preconditioned MSCs tend to stimulate HUVEC migration, proliferation and tubeforming ability. These observations imply the presence of a pro-angiogenic potential in EVs obtained after preconditioning of MSCs with TNFα and IFNγ. Discussion: In conclusion, it appears that the pro-angiogenic potential of EVs is enhanced through preconditioning of MSCs with TNFα and IFNγ. The use of these MSCs-EVs in therapy would circumvent the limitations of current cell-based therapies. Indeed, the therapeutic potential of MSC-EVs presents an attractive strategy for exploiting the clinical benefits of MSC therapy. For example, in the field of regenerative medicine, the exploitation of cell-free therapy using highly pro-angiogenic MSC-EVs is of great interest.

Intensified Influenza Virus Production in Suspension HEK293SF Cell Cultures Operated in Fed-Batch or Perfusion with Continuous Harvest.

Major efforts in the intensification of cell culture-based viral vaccine manufacturing focus on the development of high-cell-density (HCD) processes, often operated in perfusion. While perfusion operations allow for higher viable cell densities and volumetric productivities, the high perfusion rates (PR) normally adopted-typically between 2 and 4 vessel volumes per day (VVD)-dramatically increase media consumption, resulting in a higher burden on the cell retention device and raising challenges for the handling and disposal of high volumes of media. In this study, we explore high inoculum fed-batch (HIFB) and low-PR perfusion operations to intensify a cell culture-based process for influenza virus production while minimizing media consumption. To reduce product retention time in the bioreactor, produced viral particles were continuously harvested using a tangential flow depth filtration (TFDF) system as a cell retention device and harvest unit. The feeding strategies developed-a hybrid fed-batch with continuous harvest and a low-PR perfusion-allowed for infections in the range of 8-10 × 106 cells/mL while maintaining cell-specific productivity comparable to the batch control, resulting in a global increase in the process productivity. Overall, our work demonstrates that feeding strategies that minimize media consumption are suitable for large-scale influenza vaccine production.

Characterization of the Effect of a Novel Production Technique for 'Not from Concentrate' Pear and Apple Juices on the Composition of Phenolic Compounds.

The consumption of 'not-from-concentrate' (NFC) fruit juices can be a convenient and enjoyable way to incorporate the nutritional benefits and flavors of fruits into one's diet. This study will focus on the effect of production of juices from apple and pear fruits, by using centrifugal decanter and tangential filtration, on the profile of polyphenols as a valuable source of bioactive compounds. Likewise, by-products from the juice industry were characterized in order to understand the high-value-added potential based on their composition of polyphenols. Briefly, apple and apple juice showed great contents of chlorogenic acid (0.990 ± 0.021 mg/g of DW), the dihydrochalcone phloridzin (1.041 ± 0.062 mg/g of DW), procyanidins (0.733 ± 0.121 mg/g of DW) and quercetin derivatives (1.501 ± 0.192 mg/g of DW). Likewise, the most abundant compounds in pear and pear juices were chlorogenic acid (0.917 ± 0.021 mg/g of DW), caffeoylquinic acid (0.180 ± 0.029 mg/g of DW), procyanidins (0.255 ± 0.016 mg/g of DW) and quercetin derivatives (0.181 ± 0.004 mg/g of DW). Both temperature and tangential speed affect the amount of phenolic compounds in fruit juices, highlighting the need to control the technological process to obtain a more nutritious/healthier beverage. Overall, NFC juices arise as a better option when compared with concentrated juices. Furthermore, the higher yield of phenolic compounds found in fruit pomace clearly open new ways for upcycling this fruit by-product as a high-value-added ingredient.

Determination of parameters of chick embryos used in the production of inactivated influenza vaccines

The results of determining the parameters of chicken embryos for obtaining inactivated influenza vaccines are presented. The studies were carried out at LLC "Fort" (Ryazan region). 8.736 million chicken embryos were used from chickens of egg crosses Rhodonit-3, Hisex brown. In the course of the research, the dependence of the development of a chicken embryo on various growth periods was revealed. It has been established that the optimal parameters for the use of chicken embryos in the production of influenza vaccines are the life span of 7–9 days, the weight of the embryo is 2–3 g. high yield of hemagglutinin (up to 70%) compared to other groups of the sample (P<0.001). It has been shown that the increase in allantoic fluid largely depends on the purification systems used in production. The most optimal cleaning method is a tangential filtration system, which ensures high purity of the substrate obtained using chick embryos.

Modulating and optimizing Pluronic F-68 concentrations and feeding for intensified perfusion Chinese hamster ovary cell cultures.

Perfusion culture is often performed with micro-sparger to fulfill the high oxygen demand from the densified cells. Protective additive Pluronic F-68 (PF-68) is widely used to mitigate the adverse effect in cell viability from micro-sparging. In this study, different PF-68 retention ratio in alternating tangential filtration (ATF) columns was found to be crucial for cell performance of different perfusion culture modes. The PF-68 in the perfusion medium was found retained inside the bioreactor when exchanged through ATF hollow fibers with a small pore size (50 kD). The accumulated PF-68 could provide sufficient protection for cells under micro-sparging. On the other hand, with large-pore-size (0.2μm) hollow fibers, PF-68 could pass through the ATF filtration membranes with little retention, and consequently led to compromised cell growth. To overcome the defect, a PF-68 feeding strategy was designed and successfully verified on promoting cell growth with different Chinese hamster ovary (CHO) cell lines. With PF-68 feeding, enhancements were observed in both viable cell densities (20%-30%) and productivity (~30%). A threshold PF-68 concentration of 5g/L for high-density cell culture (up to 100 × 106 cells/mL) was also proposed and verified. The additional PF-68 feeding was not observed to affect product qualities. By designing the PF-68 concentration of perfusion medium to or higher than the threshold level, a similar cell growth enhancement was also achieved. This study systematically investigated the protecting role of PF-68 in intensified CHO cell cultures, shedding a light on the optimization of perfusion cultures through the control of protective additives.

Deep Study on Fouling Modelling of Ultrafiltration Membranes Used for OMW Treatment: Comparison Between Semi-empirical Models, Response Surface, and Artificial Neural Networks

Olive oil production generates a large amount of wastewater called olive mill wastewater. This paper presents the study of the effect of transmembrane pressure and cross flow velocity on the decrease in permeate flux of different ultrafiltration membranes (material and pore size) when treating a two-phase olive mill wastewater (olive oil washing wastewater). Both semi-empirical models (Hermia models adapted to tangential filtration, combined model, and series resistance model), as well as statistical and machine learning methods (response surface methodology and artificial neural networks), were studied. Regarding the Hermia model, despite the good fit, the main drawback is that it does not consider the possibility that these mechanisms occur simultaneously in the same process. According to the accuracy of the fit of the models, in terms of R2 and SD, both the series resistance model and the combined model were able to represent the experimental data well. This indicates that both cake layer formation and pore blockage contributed to membrane fouling. The inorganic membranes showed a greater tendency to irreversible fouling, with higher values of the Ra/RT (adsorption/total resistance) ratio. Response surface methodology ANOVA showed that both cross flow velocity and transmembrane pressure are significant variables with respect to permeate flux for all membranes studied. Regarding artificial neural networks, the tansig function presented better results than the selu function, all presenting high R2, ranging from 0.96 to 0.99. However, the comparison of all the analyzed models showed that depending on the membrane, one model fits better than the others. Finally, through this work, it was possible to provide a better understanding of the data modelling of different ultrafiltration membranes used for the treatment of olive mill wastewater.

Use of scanning electron microscopy and energy dispersive X-ray spectroscopy to identify key fouling species during alternating tangential filtration.

Alternating tangential flow filtration (ATF) has become one of the primary methods for cell retention and clarification in perfusion bioreactors. However, membrane fouling can cause product sieving losses that limit the performance of these systems. This study used scanning electron microscopy and energy dispersive X-ray spectroscopy to identify the nature and location of foulants on 0.2μm polyethersulfone hollow fiber membranes after use in industrial Chinese hamster ovary cell perfusion bioreactors for monoclonal antibody production. Membrane fouling was dominated by proteinaceous material, primarily host cell proteins along with some monoclonal antibody. Fouling occurred primarily on the lumen surface with much less protein trapped within the depth of the fiber. Protein deposition was also most pronounced near the inlet/exit of the hollow fibers, which are the regions with the greatest flux (and transmembrane pressure) during the cyclical operation of the ATF. These results provide important insights into the underlying phenomena governing the fouling behavior of ATF systems for continuous bioprocessing.

Tangential microfiltration of lime and pineapple juices using inexpensive tubular ceramic membrane and analysis of fouling mechanism

A non-thermal tangential filtration of lime and pineapple juices using an indigenously elaborated inexpensive bentonite-based tubular ceramic membrane (96 $/m2) is discussed in the present work. The fabricated membrane exhibited a porosity of 37% with 0.11 µm pore size and possessed adequate flexural stability of 18 MPa. Microfiltration experiments were conducted for both centrifuged juice (CJ) and Enzymatic treated centrifuged juice (ETCJ) of lime and pineapple at various operating pressures (69 – 345 kPa) and crossflow rates (110 – 150 Lph) to evaluate their effects on the resulting permeate flux and clarified juice properties. The membrane provided a maximum permeate flux of both ETCJ of lime and pineapple juices as 2.22 × 10−5 m3/m2s and 1.31 × 10−5 m3/m2s, respectively, at operating conditions of 345 kPa pressure and 150 Lph flowrate. Enzymatic pretreatment considerably enhanced the permeate fluxes of both juices. Also, comparatively a high clarity and complete removal of alcohol-insoluble solids were observed for permeate streams of ETCJ. In all the cases, the desirable characteristics of citrus juices, including pH, total soluble solids, and citric acid content, were unaltered, ensuring the uniqueness of the membrane separation processes. Furthermore, fouling analysis was carried out using Hermia's models, revealing experimental data best fits into the cake filtration model for pineapple juice and intermediate pore blocking model for lime juice clarification are identified as dominant mechanisms, respectively.

Process intensification for lentiviral vector manufacturing using tangential flow depth filtration

For gene therapies to become more accessible and affordable treatment options, process intensification is one possible strategy to increase the number of doses generated per batch of viral vector. Process intensification for lentiviral vector manufacturing can be achieved by enabling perfusion in the production bioreactor when applied in tandem with a stable producer cell line, allowing for significant expansion of cells and production of lentiviral vectors without the need for transfer plasmids. Tangential flow depth filtration was used to achieve an intensified lentiviral vector production by enabling perfusion to expand cell density and allow for continuous separation of lentiviral vectors from producer cells. Hollow-fiber depth filters made of polypropylene with 2- to 4-μm channels demonstrated high filter capacity, extended functional life, and efficient separation of lentiviral vectors from producer cells and debris when used for this intensified process. We anticipate that process intensification with tangential flow depth filtration at 200-L scale from a suspension culture can produce on the order of magnitude of 10,000 doses per batch of lentiviral vectors required for CAR T or TCR cell and gene therapy that would require approximately 2×109 transducing units per dose.

Protective Effect of Treated Olive Mill Wastewater on Target Bacteria and Mitochondrial Voltage-Dependent Anion-Selective Channel 1.

Olive mill wastewater, a by-product of the olive oil industry, represents an important resource, rich in bioactive compounds with antioxidant activity. In this study, two strategies to concentrate the bioactive components were used: the tangential membrane filtration (ultrafiltration and reverse osmosis) and the selective resin extraction. The concentrates were evaluated for physico-chemical characteristics and antioxidant activity. Furthermore, the antimicrobial activity and the effect on the mitochondrial voltage-dependent anion selective channel 1 were evaluated. The chemical results highlighted that the highest concentration of hydroxytyrosol (as 7204 mg/L) was revealed in the sample obtained by inverse osmosis while the highest concentration of oleuropein (10005 mg/L) was detected in the sample obtained by resin extraction. The latter sample exhibited the highest antimicrobial effects against Listeria monocytogenes, Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa. Both samples exhibited a high impact on the electrophysiological parameters of VDAC1 activity. These results showed that both valorization techniques, which can be reproduced at industrial scale, provided phenolic concentrates with antioxidant and antimicrobial activity useful for different future perspectives.

AAV process intensification by perfusion bioreaction and integrated clarification.

Adeno-associated viruses (AAVs) demand for clinical trials and approved therapeutic applications is increasing due to this vector's overall success and potential. The high doses associated with administration strategies challenges bioprocess engineers to develop more efficient technologies and innovative strategies capable of increasing volumetric productivity. In this study, alternating tangential flow (ATF) and Tangential Flow Depth filtration (TFDF) techniques were compared as to their potential for 1) implementing a high-cell-density perfusion process to produce AAV8 using mammalian HEK293 cells and transient transfection, and 2) integrating AAV harvest and clarification units into a single step. On the first topic, the results obtained demonstrate that AAV expression improves with a medium exchange strategy. This was evidenced firstly in the small-scale perfusion-mocking study and later verified in the 2L bioreactor operated in perfusion mode. Fine-tuning the shear rate in ATF and TFDF proved instrumental in maintaining high cell viabilities and, most importantly, enhancing AAV-specific titers (7.6 × 104VG/cell), i.e., up to 4-fold compared to non-optimized perfusion cultures and 2-fold compared with batch operation mode. Regarding the second objective, TFDF enabled the highest recovery yields during perfusion-based continuous harvest of extracellular virus and lysate clarification. This study demonstrates that ATF and TFDF techniques have the potential to support the production and continuous harvest of AAV, and enable an integrated clarification procedure, contributing to the simplification of operations and improving manufacturing efficiency.

Production of Lentiviral Vectors Using a HEK-293 Producer Cell Line and Advanced Perfusion Processing.

The field of lentiviral vector (LV) production continues to face challenges in large-scale manufacturing, specifically regarding producing enough vectors to meet the demand for treating patients as well as producing high and consistent quality of vectors for efficient dosing. Two areas of interest are the use of stable producer cell lines, which facilitates the scalability of LV production processes as well as making the process more reproducible and robust for clinical applications, and the search of a cell retention device scalable to industrial-size bioreactors. This manuscript investigates a stable producer cell line for producing LVs with GFP as the transgene at shake flask scale and demonstrates LV production at 3L bioreactor scale using the Tangential Flow Depth Filtration (TFDF) as a cell retention device in perfusion mode. Cumulative functional yields of 3.3 x 1011 and 3.9 x 1011 transducing units were achieved; the former over 6 days of LV production with 16.3 L of perfused media and the latter over 4 days with 16 L. In comparing to a previously published value that was achieved using the same stable producer cell line and the acoustic filter as the perfusion device at the same bioreactor scale, the TFDF perfusion run produced 1.5-fold higher cumulative functional yield. Given its scale-up potential, the TFDF is an excellent candidate to be further evaluated to determine optimized conditions that can ultimately support continuous manufacturing of LVs at large scale.

Phenols recovered from olive mill wastewater as natural booster to fortify blood orange juice

In the present study, a tangential membrane filtration system was applied to recover phenols from olive mill wastewater. The obtained concentrates were characterised for physico-chemical traits, antioxidant activity and antimicrobial effects. Results indicated that the highest concentration of hydroxytyrosol (7203.7 mg/L) was detected in the concentrate obtained by reverse osmosis, which also showed the highest antioxidant and antimicrobial activity. Moreover, the same concentrate was added, at different ratio, up to 4:250 v/v, into a commercial blood orange juice. The fortified juice with the addition of the concentrate, up to 2:250 v/v ratio, did not show off-flavour and off-odour compared to the control. Furthermore, after 60 days of refrigerated storage, the fortified juice exhibited a hydroxytyrosol content still complying with the daily intake recommended by EFSA health claim. The obtained results can be industrially useful in producing orange juice added with a natural antioxidant concentrate as a ‘clean label’ ingredient.

Study of the permeability of tubular mineral membranes: application to wastewater treatment

This research work opens up the possibility of developing tubular mineral membranes from Moroccan clay powders and their use in water permeability tests and wastewater treatment. The aim is to show the possibility of using clay as a low-cost raw material for the production of ceramic membranes with high mechanical and chemical performances.In a first step, we developed ceramic membranes by extruding a prepared plastic paste with the addition of an optimized amount of wood powder as organic matter (OM) to improve the porosity characteristics of the final products after firing. Several parameters are controlled such as the chemical and mineralogical composition of the starting clay powder, the granulometry and the final sintering temperature.The effect of sintering temperature in the range from 800 to 1000 °C, and OM addition (5, 10, 15wt%) on tubular membrane properties such as mechanical and chemical resistance, porosity and permeability were investigated. It was found that the incorporation of OM in the raw clay enhance the pore volume and the permeate flux but it was also accompanied by a decrease in mechanical strength. The membrane sintered at 1000 °C with 15wt% of OM is considered as optimized membrane and it was applied for the second stage of this work. This stage concerns the treatment of wastewater from a thermal complex located 12 km south of the city of Meknes, Morocco, through a treatment by a biological disk microstation. The filtrate obtained then undergoes tangential filtration by the membranes elaborated and optimized following the evolution of the pollution parameters. Based on physicochemical and biological analyses of wastewater after treatment by the coupled system, the membranes obtained have a good permeability and an excellent pollution removal performance.

Characterization of ceramic pieces shaped from clay intended for the development of filtration membranes

This research work is focused in study of the dilation/retreat properties of ceramic membranes and its characterization. The clay used in this work is collected in the region of Midelt in Morocco. This raw material has been characterized by XRD, FTIR, TGA/DTA and X-ray fluorescence. These analyzes show that this clay consists essentially of Quartz and Kaolinite. Then, the clay pastes containing different proportions of the organic additive are aged and used to develop rods and bricks of known geometric dimensions. However, the pastilles were developed by dry process. After drying in the open air with a different percentage of the organic matter (0–15%), the parts are treated at different temperatures (700, 800, 900, 1000 and 1050 °C) according to a suitable heating program, taking into account the initial mineralogical composition and the TGA/DTA thermograms of the samples. The dilation/retreat properties of the processed samples are discussed according to the variation of predetermined parameters such as weight loss, length, height and diameter. The evolution of the porosity, the mechanical and chemical resistance of the samples is determined. It has been found that the organic additive increases the porosity of the parts prepared by its degradation by the heat treatment and the results obtained show that the prepared materials have a high mechanical strength and chemical resistance and they have improved porosity. Indeed, the clay studied will be used to develop tubular membranes intended for the tangential filtration of wastewater, which will be the subject of the second part of this study.