Tangent Sigmoid Research Articles

A novel computational approach based hyperbolic tangent sigmoid deep neural network for the hepatitis B virus model

A novel computational approach based hyperbolic tangent sigmoid deep neural network for the hepatitis B virus model

New strategy to optimize in-situ fenton oxidation for TPH contaminated soil remediation via artificial neural network approach

In-situ remediation of total petroleum hydrocarbon (TPH) contaminated soils via Fenton oxidation is a promising approach. However, determining the proper injection amount of H2O2 and Fe source over the Fenton reaction in the complex geological conditions for in-situ TPH soil remediation remains a daunting challenge. Herein, we introduced a practical and novel approach using soft computational models, a multilayer perception artificial neural network (MPLNN), for predicting the TPH removal performance. In this study, we conducted 48 sets of TPH removal experiments using Fenton oxidation to determine the TPH removal performance of a wide range of different ground conditions and generated 336 data points. As a result, a negative Pearson correlation coefficient was obtained in the Fe injection mass and the natural presence of Fe mineral in the soil, indicating that the excess of Fe could significantly retarded the TPH removal performance in the Fenton reaction. In addition, the MPLNN model with 6-6-1 training using Scaled conjugate gradient backpropagation (SCG) with tangent sigmoid as the transfer function demonstrated a high accuracy for TPH removal prediction with the correlation determination of 0.974 and mean square error value of 0.0259. The optimized MPLNN model achieved less than 20% error for predicting TPH removal performance in actual TPH-contaminated soil via Fenton oxidation. Hence, the proposed MPLNN can be useful in improving the Fenton oxidation of TPH removal performance in-situ soil remediation.

Security monitoring via sound analysis and voice identification with artificial intelligence

The article demonstrates the possibility of monitoring user access through authentication based on voice profiles using the means of Artificial Intelligence. A two-stage approach is proposed for sound analysis and voice recognition using Feed-Forward Neural Networks (FFNNs) and Cascade-Forward Neural Networks (CFNNs). Seven test voice profiles were pre-processed to extract quantitative sound features. The procedure involves registration of a set of sound parameters concerning three categories, respectively, for all audio and acoustic measurements in the entire sound spectrum, measurements up to and above 100 dBA. The neural architectures were trained with Scaled Gradient Descent (SCG) and Levenberg Marquardt (LM) algorithms, using different transfer functions in the output structural layers. In the initial phase of neural training, the entire sound spectrum of registered indicators was used, and high levels of Accuracy around 90.0% were reached. Subsequently, steps were taken to reduce the informative features when searching for similar levels of accuracy in order to limit the necessary computational procedures in neural training, but maintain the threshold of successful user authentication. In the analysis of neural performance, in addition to accuracy, additional criteria were used, namely Mean-Squared Error (MSE) and Root Mean Squared Error (RMSE). About the achieved and analyzed results, a synthesis was conducted of a set of four informative features with the highest significance, respectively LAE (A-weighted, sound exposure level), Laeq (A-weighted, equivalent sound level), LAF (A-weighted, fast time-constant, sound level) and LAS (A-weighted, slow time constant response, sound level). In the course of subsequent neural training processes, unsuitability was found when using the Log-sigmoid activation type with greatly underestimated accuracy readings and errors below 58.0% and above thresholds of 0.2300 and 0.4800. Positive performance indicators of voice recognition were achieved with Softmax and Hyperbolic tangent sigmoid activations in SCG and LM training procedures in levels of accuracy of 98.7 % and 96.1 % at FFNN models. Successful correct recognition of the test voice profiles on access and security personalization with a quantitative equivalent of 100.0 % accuracy was achieved in the Linear transfer function for Cascade-Forward Neural Networks. The proposed method and the synthesized neural models in the research can be used as units and modules in access control systems with biometric diagnostics and intelligent recognition of employees in company departments to electronically store classified information and physical access control.

Optimized artificial neural network application for estimating oil recovery factor of solution gas drive sandstone reservoirs

The most crucial aspect in determining field development plans is the oil recovery factor (RF). However, RF has a complex relationship with the reservoir rock and fluid properties. The application of artificial neural networks is able to produce complex correlations between reservoir parameters that affect the recovery factor. This research provides a new approach to improve the accuracy of the ANN model in the form of steps including removing outlier data, selecting input parameters, selecting transferring functions, selecting the number of neurons, and determining hidden layers. By applying these steps, an ANN model was selected with nine input parameters consisting of oil viscosity, water saturation, initial oil formation volume factor, formation thickness, initial pressure, permeability, specific gravity of oil, porosity, and original oil in place. Furthermore, based on the correlation coefficient, a tangent sigmoid transferring function, 30 neurons, and two hidden layers were determined. The proposed ANN correlation gives the best accuracy compared to the previous correlations. This is proved by the highest correlation coefficient of 0.91657.

Modelling reverse osmosis process and multiple effect evaporator process of common effluent treatment plant using artificial neural network

This paper presents the study on modeling the performance of Textile and Tannery Common Effluent Treatment Plant (CETP) using Artificial Neural Networks (ANN). The process of Reverse Osmosis (RO) Process and Multiple Effect Evaporator (MEE) process of CETP is modelled using ANNs. Two ANN models were developed to predict the performance of CETP dealing with highly saline effluents. Model-I (RO Model) predicts TDS Rejection (%) by taking pH, Electrical Conductivity (EC), Total Dissolved Solids (TDS), Chemical Oxygen Demand (COD) of RO feed as input parameters thus providing estimate of salt concentration. Model-II (MEE Model) predicts Steam Output needed by taking pH, TDS, Feed flow as input parameters. Levenberg-Marquardt backpropagation (trainlm) algorithm was used as training function for creation of both of ANN models and Hyperbolic Tangent Sigmoid (tansig) was used as transfer function. Separate model validation has been performed to test the predictability of the model and at last prediction accuracy were analysed to show its efficiency in prediction.

Justifying the prediction of major soil nutrients levels (N, P, and K) in cabbage cultivation

In a recent paper by Sajindra et al. [1], the soil nutrient levels, specifically nitrogen, phosphorus, and potassium, in organic cabbage cultivation were predicted using a deep learning model. This model was designed with a total of four hidden layers, excluding the input and output layers, with each hidden layer meticulously crafted to contain ten nodes. The selection of the tangent sigmoid transfer function as the optimal activation function for the dataset was based on considerations such as the coefficient of correlation, mean squared error, and the accuracy of the predicted results. Throughout this study, the objective is to justify the tangent sigmoid transfer function and provide mathematical justification for the obtained results.•This paper presents the comprehensive methodology for the development of deep neural network for predict the soil nutrient levels.•Tangent Sigmoid transfer function usage is justified in predictions.•Methodology can be adapted to any similar real-world scenarios.

Artificial Neural Network Accuracy Optimization Using Transfer Function Methods on Various Human Gait Walking Environments

A bionic leg with ergonomic functionality can increase the user’s independence. However, an ergonomic bionic leg can be challenged to be developed. One of its challenges is related to functionality, where the bionic leg motor can be rugged to adapt to the user. One of the solutions for the bionic leg challenge is the application of a motor driver controlled by the user’s muscle signal. EMG signal can be utilized as the user’s signal source. The EMG signal is then fed back into the motor device. EMG signals obtained during a natural walking environment can result in smooth and natural movement. This study classifies EMG signals into 8 classes: a controlled walking environment (treadmill walking with various speeds) and a natural walking environment (ground walking, upstairs and downstairs walking). This research aims to optimize the ANN method using transfer function variations. The best method will be used to train EMG-driven motors for future studies related to bionic legs. The best ANN parameter in this research using Levenberg-Marquardt backpropagation as a training algorithm with transfer function pairing of the exponential function: Hyperbolic tangent sigmoid transfer function and SoftMax transfer function with 98.8% accuracy and 0.036 MSE value. The best method from the experiment and ANN classification can be used as a training method for a bionic leg in future research.

OUTPUT POWER ESTIMATION OF A PHOTOVOLTAIC PANEL BY EXTREME LEARNING MACHINE

In this study, the output power of a PV panel under different operating conditions was estimated with the help of an extreme learning algorithm (ELM). For this purpose, a PV panel with a power of 180W was installed, and the open circuit voltage, short circuit current, panel temperature, and solar radiation of this panel were measured and recorded at regular intervals. A total of 75 measurement data were obtained. The maximum power of the panel was calculated using the open circuit voltage and short circuit current information. While panel temperature and solar radiation were given as inputs to the regression model of the PV panel based on ELM, the output of the regression model was taken as the maximum power of the PV panel. To improve the prediction accuracy of ELM, the number of input neurons of ELM and the type of activation function used in the hidden layer were determined by trial and error method. The generated PV data set is separated into training and testing sets. The performance of the method was examined with the 5-fold cross-validation method. For this purpose, the dataset was divided into 5 equal parts. One of these parts was used for testing the ELM and the remaining four sets were used for training the ELM, and this was done by changing the test set each time. Thus, the network was trained and tested 5 times with different sets, and the test result of the network was obtained by averaging the sum of the performances of all test functions. Regression results obtained from ELM are given for different numbers of hidden layer neurons and different types of activation functions in the hidden layer. The best prediction result of ELM was obtained for the case where the hidden layer activation function was tangent sigmoid and the number of hidden layer neurons was 20. From the results obtained, it has been seen that ELM predicts the output power of the PV panel with very high accuracy. It is concluded that ELM is a useful tool for estimating the PV panel output power.

Tribological Behaviour of Hypereutectic Al-Si Composites: A Multi-Response Optimisation Approach with ANN and Taguchi Grey Method

An optimisation model for small datasets was applied to thixocasted/compocasted composites and hybrid composites with hypereutectic Al-18Si base alloys. Composites were produced with the addition of Al2O3 (36 µm/25 nm) or SiC (40 µm) particles. Based on the design of experiment, tribological tests were performed on the tribometer with block-on-disc contact geometry for normal loads of 100 and 200 N, a sliding speed of 0.5 m/s, and a sliding distance of 1000 m. For the prediction of the tribological behaviour of composites, artificial neural networks (ANNs) were used. Three inputs were considered for ANN training: type of reinforcement (base alloy, Al2O3 and SiC), amount of Al2O3 nano-reinforcement (0 and 0.5 wt.%), and load (100 and 200 N). Various ANNs were applied, and the best ANN for wear rate (WR), with an overall regression coefficient of 0.99484, was a network with architecture 3-15-1 and a logsig (logarithmic sigmoid) transfer function. For coefficient of friction (CoF), the best ANN was the one with architecture 3-6-1 and a tansig (hyperbolic tangent sigmoid) transfer function and had an overall regression coefficient of 0.93096. To investigate the potential of ANN for the prediction of two outputs simultaneously, an ANN was trained, and the best results were from network 3-5-2 with a logsig transfer function and overall regression coefficient of 0.99776, but the predicted values for CoF in this case did not show good correlation with experimental results. After the selection of the best ANNs, the Taguchi grey multi-response optimisation of WR and CoF was performed for the same combination of factors as the ANNs. For optimal WR and CoF, the combination of factors was as follows: composite with 3 wt.% Al2O3 micro-reinforcement, 0.5 wt.% Al2O3 nano-reinforcement, and a load of 100 N. The results show that developed ANN, the Taguchi method, and the Taguchi grey method can, with high reliability, be used for the optimisation of wear rate and coefficient of friction of hypereutectic Al-Si composites. Microstructural investigations of worn surfaces were performed, and the wear mechanism for all tested materials was light abrasion and adhesion. The findings from this research can contribute to the future development of hypereutectic Al-Si composites.

Modeling and estimation of water activity for the ionic-liquid-based aqueous ternary systems by smart paradigms

In this study, different artificial intelligence (AI) techniques are employed to determine the water activity of ionic liquid-based ternary systems as a function of pressure, temperature, and the type and concentration of the components. The proposed model has been selected among five artificial neural networks (ANNs), bagged trees (BT), decision trees (DT), gaussian process regression (GPR), adaptive neuro-fuzzy inference systems (ANFIS), and least square support vector machines (LS-SVM) by trial-and-error process and ranking analysis of statistical and computational indicators. The most accurate model is the cascade feed-forward neural network with fifteen hidden neurons which are equipped with logarithm and hyperbolic tangent sigmoid transfer functions. This model estimates 1829 empirical water activity for ionic liquid-based ternary systems with AARD=0.25 %, MSE=1.73 × 10−5, RMSE=4.16 × 10−3, and R2=0.9919.

A fast computational technique based on a novel tangent sigmoid anisotropic diffusion function for image-denoising

A fast computational technique based on a novel tangent sigmoid anisotropic diffusion function for image-denoising

Prediction of River Water Treatment Plant Operational Performances using Optimization Approach in Artificial Neural Network Model

Uncontrolled development at the upstream of the river catchment have led to detrimental effect to the environment, including degradation of river water quality. River Water Treatment Plant (RWTP) technology was introduced to reduce the contamination loading into the river water system, worldwide. The technology offers the best biological treatment process including simplicity and stable removal efficiency. However, the plant performance plan is difficult task to predict, thus might have influence the operational control. Recently, artificial neural network (ANN) models have been widely applied in environmental engineering area due to the ability to skip the complexity process to assume of the unknown variables compare to conventional physical based model. In this study, the results of 3-yrs performance using ANN of RWTP were developed. Feed-forward back-propagation using Levenberg–Marquardt (trainlm) used as for this predictive approach. The ideal configuration involves utilizing the tangent sigmoid transfer function (Tansig) in the hidden layer and a linear transfer function (Purelin) in the output layer, with 25 neurons. This configuration yields an R2 value of 0.963 and the most least mean square error (MSE) of 30.39. From the comparison between two model (bio-kinetic and ANN), performance indicator for ANN model shows the best and the most optimum model. Ultimately, RWTP optimization using black-box model ANN is more reliable and timesaving as compared to conventional bio-kinetic model. The development of the proposed model can be implemented and used for various water quality improvement facilities and predict the effluent target parameter in RWTP with higher degree of accuracy.

A novel deep learning model to predict the soil nutrient levels (N, P, and K) in cabbage cultivation

Cabbage (Brassica oleracea) is a green cruciferous vegetable. Major nutrients (nitrogen, phosphorus, and potassium) are frequently applied to the soil due to low fertility levels. However, optimizing required fertilizer levels are extremely important to avoid any overuse and underuse. Therefore, it is important to develop a comprehensive methodology for evaluating the major nutrients in the soil. In this research, a deep learning model was introduced to predict the nitrogen, phosphorus, and potassium content of the soil by analyzing the growing characteristics of the plants, such as plant height, the number of leaves, and the average leaf area of the plant. To achieve this, the growing characteristics of the cabbage plants were recorded weekly along with the respective soil nitrogen, phosphorus, and potassium content of the nearby soil. After the data was trained using the Levenberg–Marquardt algorithm and tested with different transfer functions such as logarithmic sigmoid, pure linear, and tangent sigmoid, better predictions were obtained through the model. According to the Pearson correlation values, pure linear and tangent sigmoid showed higher values, ranging from 0.99 for training, testing, validation, and all data points from the model, indicating a strong relationship between the actual and predicted values. According to the Mean Square Error values, the tangent sigmoid transfer function outperformed the others, giving a value of 1.0813, indicating better predictions of the soil nitrogen, phosphorus, and potassium content from the model.

Nonlinear Autoregressive Neural Network for Forecasting COVID-19 Confirmed Cases in Malaysia

A nonlinear autoregressive neural network (NARNN) model is a feedforward neural network for handling complex nonlinear time series problem. In this study, the tangent sigmoid (tansig) activation function with different number of past values and different number of hidden neurons for NARNN model is determined. The COVID-19 daily confirmed cases in Malaysia are collected with different amount of sample used which are 100, 500 and 900. Therefore, data of 100, 500 and 900 days prior to 21 September 2022 are extracted for the NARNN model training, validation and testing procedure. The lowest average mean squared error (MSE) are considered as the best combination. Result shown that the past value 1:10 and number of neurons of 10 when the sample size is 100. At sample size 500, past values of 1:10 and number of neurons of 8 enables the model to perform at its best. Whereas for sample size 900, network setting of 1:5 past value and 5 hidden neurons gives the least MSE. Multi-step ahead time series forecasting is conducted to forecast the number of COVID-19 confirmed cases in 7 days which is from 22 to 28 September 2022. The result shown for 7-days-ahead confirmed cases forecasting Malaysia datasets, the best forecasting outcome occurs when 900 samples are inputted.

Binary Honey Badger Algorithm for 0-1 Knapsack Problem

Honey Badger Algorithm (HBA) is one of the recently proposed optimization techniques inspired by the foraging behavior of honey badger. Although it has been successfully applied in solving continuous problems, the algorithm cannot be implemented directly in binary problems. A binary version of HBA is proposed in this study for the 0-1 Knapsack Problem (0-1 KP). To adapt the binary version of HBA, V- Shaped, S-Shaped, U-Shaped, T-Shaped, Tangent Sigmoid, O-Shaped, and Z-Shaped transfer functions are used. Each transfer function was tested by computational experiments over 25 instances of 0-1 KP and compared results. According to the results obtained, it was observed that O1 was the best TF among 25 TFs. In addition, the proposed algorithm was compared with three different binary variants, such as BPSO, MBPSO, and NGHS. Experimental results and comparison show that the proposed method is a promising and alternative algorithm for 0-1 KP problems.

Modeling the effect of meteorological variables on streamflow estimation: application of data mining techniques in mixed rainfall-snowmelt regime Munzur River, Türkiye.

Revealing the dynamic link between rainfall and runoff, which are the main components of the hydrological cycle, is significant for the planning and managing water resources, disaster risk management, and construction of water structures. This study used feed-forward neural network (FFNN), adaptive neuro-fuzzy inference system (ANFIS), and long short-term memory (LSTM) network to model the rainfall-runoff relationship. Various variations of lagged precipitation, temperature, relative humidity, and flows were presented as inputs, and the flow values of Munzur River were estimated as outputs. During the selection of input parameters, variables with high correlation to flow values were utilized. The model's success was tested using several statistical indicators, including the coefficient of correlation (R), coefficient of determination (R2), and root mean square error (RMSE). When measuring values and model results are compared, FFNN and ANFIS models show accurate predictive results with high accuracy, while LSTM prediction results are not satisfactory. However, it was concluded that the FFNN model with the hyperbolic tangent sigmoid transfer function and Levenberg-Marquardt training algorithm made a slightly more accurate estimation. In addition, it was revealed that the best ANFIS-Sugeno model was obtained with a hybrid learning algorithm, Gaussmf membership function, and eight subsets. As a result of the analysis, it has been found that FFNN is superior to ANFIS in flow prediction. These results provide policymakers and planners with helpful information for developing flood and drought management strategies.

Machine learning assisted coupled frequency analysis of skewed multi-phase magnetoelectric composite plates with temperature and moisture dependent properties

In this article, the application of an artificial neural network (ANN)-based machine learning (ML) strategy to predict the coupled frequency of geometrically skewed multiphase magnetoelectric (MME) composite plate exposed to hygrothermal environment is presented. The ANN model is trained using a dataset comprising more than one million simulations conducted using an in-house developed finite element formulation. The underlying multiphysics governing equations are derived using Hamilton’s principle and higher-order shear deformation theory (HSDT). The influence of the hygrothermal environment on the elastic stiffness of MME composites is defined by the empirical constants in the constitutive relations. Four prominent combinations of the empirical constants leading to different elastic stiffness relations have been considered in this study. Alongside, the influence of geometrical skewness on the coupled fundamental frequency is also assessed. For the training of the ANN model, the Levenberg–Marquardt optimization algorithm with 30 neurons along with a tangent sigmoid activation function is used. The trained ANN model is tested on an unseen dataset, different from the training data, and it is shown to accurately predict the natural frequency of MME plate with a maximum error of 2.3%. Further, excluding the training time and considering the computational time alone, the ANN model is found to be 6.3 times faster than the FE simulations. It is anticipated that such ML-based reduced order models can be effective in the design process, especially in complex multiphysics problems, such as the one considered in the work, involving a multitude of geometric, loading and material parameters.

Dry-sliding wear properties of 3D printed PETG/SCF/OMMT nanocomposites: Experimentation and model predictions using artificial neural network

In this article, an attempt has been made to experimentally investigate the synergistic effect of organically modified montmorillonite (OMMT) nanoclay and short carbon fibers (SCFs) on the tribological behaviour of additively manufactured Polyethylene Terephthalate Glycol (PETG) based nanocomposites. The tribo-specimens are 3D printed using fused deposition modelling (FDM). The tribological properties, that is, specific wear rate (SWR) and coefficient of friction (CoF) of various PETG/SCF/OMMT nanocomposites were assessed by performing dry-sliding wear test. In addition, an artificial neural network (ANN) methodology is proposed to accurately predict the wear performance of PETG nanocomposites. The ANN model is trained using the datasets obtained from the experimentation. For the training of the ANN model, the Levenberg–Marquardt optimisation algorithm with 10 neurons along with a tangent sigmoid activation function is utilised. Additional experimentation was performed for arbitrary load and sliding velocity which were not used for training the ANN model and the results were compared to assess the predictive capability of the ANN model on unseen data. The proposed ANN methodology predicted the SWR and CoF with agreeable accuracy. It is believed that by adopting the proposed ANN methodology, the experimentation costs and time can be significantly reduced without compromising on the accuracy of the results.

Evaluating energy absorption of sustainable rubber crumb/kenaf composites through artificial neural network strategies for low‐velocity impact loads

AbstractThis study presents an innovative approach utilizing Artificial Neural Network (ANN) strategies to evaluate the energy absorption capabilities of eco‐friendly rubber crumb/kenaf composites subjected to low‐velocity impact loads. The primary objectives of this research were to assess the energy absorption characteristics of these sustainable composites, understand their mechanical behavior under the impact, and provide valuable insights into their potential applications. To achieve these objectives, an experimental methodology was employed. Rubber crumb/kenaf composites with varying compositions were prepared, and low‐velocity impact tests were conducted using a drop‐weight impact testing apparatus to assess their energy absorption behavior and these parameters were used as inputs for training the ANN models. The weight percentage of waste tire rubber particle (WTRP), type of impactor and impact energies are considered as input data, whereas the absorbed energy is treated as the output. Through the advanced ANN strategies, accurate predictions of energy absorption performance were achieved for the rubber crumb/kenaf composites. The Levenberg–Marquardt optimisation algorithm with ten neurons and a tangent sigmoid activation function is used to train the ANN model. The trained ANN model is tested on an unseen dataset, different from the training data. It is shown to accurately predict the energy absorption characteristics of WTRP/KRE composites with a maximum error of 4.54%. The results revealed that the composite's energy absorption capabilities were influenced by the ratio of rubber crumb to kenaf, as well as the impact velocity. Additionally, the ANN models demonstrated excellent predictive capabilities, enabling efficient estimation of energy absorption behavior. The significance of these results lies in the potential applications of eco‐friendly rubber crumb/kenaf composites. By understanding their energy absorption characteristics, these composites can be effectively utilized in various industries. For instance, they could be employed in automotive parts manufacturing to enhance occupant safety during low‐velocity impact events. Furthermore, these composites can find applications in sports equipment, protective gear, and other impact‐prone products, contributing to sustainable and environmentally friendly materials. It is believed that by adopting the proposed ANN methodology, the experimentation costs and time can be significantly reduced without compromising the accuracy of the results. The obtained results provide valuable insights into the mechanical behavior of these sustainable composites and open avenues for their implementation in diverse industries where impact resistance is crucialHighlights Development of sustainable Rubber crumb/kenaf composites Application of advanced ANN based predictive assessment of the impact response Parametric study of impactor shape and height of impact is performed The damage mechanism contributing to energy absorption is micrographically studied

A promising artificial intelligence-based tool to simulate the efficient and sustainable hydrogen sulfide elimination using deep eutectic solvents

This work applies artificial intelligence (AI) methodologies and relevance tests to investigate the hydrogen sulfide (H2S) elimination capacity of a wide range of DESs (deep eutectic solvents). A great deal of effort is made to deploy a practical model to predict the H2S removal ability of eighteen different DESs as a function of DES chemistry, equilibrium conditions, and H2S-DES interaction. Multiple linear regression and Pearson’s correlation methods are employed to measure the direction and relative influence of hydrogen bond acceptor (HBA), hydrogen-bond donor (HBD), the HBA and HBD concentration, water dose, pressure, temperature, and absorption enthalpy on the DES capacity to absorb H2S molecules. Both tests approve that absorption enthalpy (ΔH) of H2S by DESs, hydrogen bond acceptor (HBA), pressure, and temperature mainly control the considered separation process. The relevance tests also identify that the H2S solubility in DESs improves by either a decrease in ΔH, HBA molecular weight, and temperature or an increase in pressure. Then, five diverse AI types are applied to estimate H2S molality in DESs as a function of the involved explanatory variables, and their accuracy is compared. The sensitivity analysis clarifies that the cascade neural network (CNN) with only 20 hidden nodes is the most reliable AI tool to simulate the considered problem. Further investigations approve that the CNN tool provides more accurate predictions for H2S solubility in DESs when it is equipped with the logarithm and tangent sigmoid transfer functions in the hidden and output neuronic layers. Also, amongst eleven checked training algorithms, the Levenberg-Marquardt presented the best performance. This structure-regulated CNN tool can predict 512 actual H2S solubility records in DESs with the MSE = 0.0031, MAE = 0.02, RAE = 2.03%, AARE = 3.03%, and multiple-R = 0.99943.