TAC Clones Research Articles

Genetic and physical mapping of the avirulence gene Avr-Pik m in Magnaporthe oryzae

The interaction between rice and the rice blast fungus Magnaporthe oryzae follows a gene-for-gene model. The pathotype of a strain is determined by its avirulence gene content. In this study, we crossed avirulent strain S1522 and virulent strain S159 to generate 108 progenies. We subsequently isolated the avirulence gene Avr-Pik m through classical genetic analysis. The segregation ratio in F1 population was 1:1 and confirmed the presence of a single locus in the genome of S1522. Two SCAR and five SSR markers linked to the avirulence gene were identified from the segregated population, and Avr-Pik m was mapped on the chromosome of M. oryzae. A genomic library of avirulence parental strain S1522 was then constructed; the library was screened using the markers SCE121406 and SSR47A18, which were linked to the AVR gene as probes. Using these procedures, a fine physical map was assembled to include five TAC clones. TAC clone 35C5 is 32 kb in length and contains the two above-mentioned SCE121406 and SSR47A18 probes, suggesting that the Avr-Pik m gene spans across the two markers located on the clone. These results provide support towards Avr-Pik m map-based cloning.

The transposable element landscape of the model legume Lotus japonicus.

The largest component of plant and animal genomes characterized to date is transposable elements (TEs). The availability of a significant amount of Lotus japonicus genome sequence has permitted for the first time a comprehensive study of the TE landscape in a legume species. Here we report the results of a combined computer-assisted and experimental analysis of the TEs in the 32.4 Mb of finished TAC clones. While computer-assisted analysis facilitated a determination of TE abundance and diversity, the availability of complete TAC sequences permitted identification of full-length TEs, which facilitated the design of tools for genomewide experimental analysis. In addition to containing all TE types found in previously characterized plant genomes, the TE component of L. japonicus contained several surprises. First, it is the second species (after Oryza sativa) found to be rich in Pack-MULEs, with >1000 elements that have captured and amplified gene fragments. In addition, we have identified what appears to be a legume-specific MULE family that was previously identified only in fungal species. Finally, the L. japonicus genome contains many hundreds, perhaps thousands of Sireviruses: Ty1/copia-like elements with an extra ORF. Significantly, several of the L. japonicus Sireviruses have recently amplified and may still be actively transposing.

Genetic and physical fine-mapping of theSc locus conferringindica-japonica hybrid sterility in rice (Oryza sativa L.)

Hybrid sterility is a major hindrance to utilizing the heterosis inindica-japonica hybrids. To isolate a geneSc conferring the hybrid sterility, the locus was mapped using molecular markers and an F2 population derived from a cross between near isogenic lines. A primary linkage analysis showed thatSc was linked closely with 4 markers on chromosome 3, on which the genetic distance between a marker RG227 andSc was 0.07 cM. Chromosome walking with a rice TAC genomic library was carried out using RG227 as a starting probe, and a contig of ca. 320 kb covering theSc locus was constructed. Two TAC clones, M45E14 and M90J01 that might cover theSc locus, were partially sequenced. By searching the rice sequence databases with sequences of the TACs and RG227 ajaponica rice BAC sequence, OSJNBb0078P24 was identified. By comparing the TAC and BAC sequences, six new PCR-based markers were developed. With these markers theSc locus was further mapped to a region of 46 kb. The results suggest that the BAC OSJNBb0078P24 and TAC M45E14 contain theSc gene. Six ORFs were predicted in the focused 46-kb region.

BIBAC and TAC clones containing potato genomic DNA fragments larger than 100 kb are not stable in Agrobacterium.

Development of efficient methods to transfer large DNA fragments into plants will greatly facilitate the map-based cloning of genes. The recently developed BIBAC and TAC vectors have shown potential to deliver large DNA fragments into plants via Agrobacterium-mediated transformation. Here we report that BIBAC and TAC clones containing potato genomic DNA fragments larger than 100 kb are not stable in Agrobacterium. We tested the possible factors that may cause instability, including the insert sizes of the BIBAC and TAC constructs, potato DNA fragments consisting of highly repetitive or largely single-copy DNA sequences, different Agrobacterium transformation methods and different Agrobacterium strains. The insert sizes of the potato BIBAC and TAC constructs were found to be critical to their stability in Agrobacterium. All constructs containing a potato DNA fragment larger than 100 kb were not stable in any of the four tested Agrobacterium strains, including two recA deficient strains. We developed a transposon-based technique that can be used to efficiently subclone a BAC insert into two to three BIBAC/TAC constructs to circumvent the instability problem.

Structural analysis of a Lotus japonicus genome. I. Sequence features and mapping of fifty-six TAC clones which cover the 5.4 mb regions of the genome.

A total of 56 TAC clones with an average insert size of 100 kb were isolated from a TAC library of the Lotus japonicus genome based on the expressed sequences tags (ESTs), cDNA and gene information, and their nucleotide sequences were determined according to the shot-gun based strategy. The total length of the sequenced regions is 5,473,195 bp. By comparison with the sequences in protein and EST databases and analysis with computer programs for gene modeling, a total of 605 potential protein-encoding genes with known or predicted functions, 69 gene segments, and 172 pseudogenes were identified. The average density of the genes assigned so far is 1 gene/8120 bp. Introns were identified in approximately 78% of the potential genes. There was an average of 3.8 introns per gene and the average length of the introns was 375 bp. DNA markers were generated based on the nucleotide sequences obtained, and each clone was mapped onto the linkage map using the F2 mapping population derived from a cross of L. japonicus Gifu B-129 and Miyakojima MG-20. The sequence data, gene information and mapping information are available through the World Wide Web at http://www.kazusa.or.jp/lotus/.

Structural analysis of Arabidopsis thaliana chromosome 3. I. Sequence features of the regions of 4,504,864 bp covered by sixty P1 and TAC clones.

Based on the physical map of Arabidopsis thaliana chromosome 3 previously constructed with CIC YAC, TAC, P1 and BAC clones (Sato, S. et al., DNA Res., 5, 163-168, 1998), a total of 60 P1 and TAC clones were sequenced, and the sequence features of the resulting 4,504,864 bp regions were analyzed by applying various computer programs for similarity search and gene modeling. As a result, a total of 1054 potential protein-coding genes were identified. The average density of the genes identified was 1 gene per 4066 bp. Introns were observed in 77% of the genes, and the average number per gene and the average length of the introns were 3.9 and 156 bp, respectively. These sequence features are essentially identical to those of chromosome 5 in our previous reports, but the gene density was slightly higher than that observed for chromosomes 2 and 4. The regions also contained 10 tRNA genes when searched by similarity to reported tRNA genes and the tRNA scan-SE program. The sequence data and information on the potential genes are available through the World Wide Web database KAOS (Kazusa Arabidopsis data Opening Site) at http://www.kazusa.or.jp/kaos/.

Structural analysis of Arabidopsis thaliana chromosome 5. X. Sequence features of the regions of 3,076,755 bp covered by sixty P1 and TAC clones.

In our ongoing project to deduce the nucleotide sequence of Arabidopsis thaliana chromosome 5, non-redundant P1 and TAC clones have been sequenced on the basis of the fine physical map, and as of January, 2000, the sequences of 16.6 Mb representing approximately 60% of chromosome 5 have been accumulated and released at our web site. Along with the sequence determination, structural features of the sequenced regions have been analyzed by applying a variety of computer programs, and we already predicted a total of 2697 potential protein coding genes in the 11,166,130 bp regions, which are covered by 159 P1 and TAC clones. In this paper, we describe the structural features of the 3,076,755 bp regions covered by newly analyzed 60 P1 and TAC clones. A total of 715 potential protein coding genes were identified, giving an average density of the genes identified of 1 gene per 4001 bp. Introns were observed in 80% of the genes, and the average number per gene and the average length of the introns were 4.5 and 147 bp, respectively. These sequence features are nearly identical to those in our latest report in which the data were compiled based on a new standard of gene assignment including the computer-predicted hypothetical genes. The regions also contained 12 tRNA genes when searched by similarity to reported tRNA genes and the tRNA scan-SE program. The sequence data and information on the potential genes are available through the World Wide Web database KAOS (Kazusa Arabidopsis data Opening Site) at http://www.kazusa.or.jp/kaos/.

Structural analysis of Arabidopsis thaliana chromosome 3. II. Sequence features of the 4,251,695 bp regions covered by 90 P1, TAC and BAC clones.

To deduce the entire sequence of the top arm of the Arabidopsis thaliana chromosome 3, the sequence determination was performed on a total of 90 P1, TAC and BAC clones chosen according to our sequencing strategy. Sequence features of the resulting 4,251,695 bp regions were analyzed with various computer programs for similarity search and gene modeling. As a result, a total of 941 potential protein-coding genes were identified. The average density of the genes identified was 1 gene per 4210 bp. Introns were observed in 73% of the genes, and the average number per gene and the average length of the introns were 3.6 and 159 bp, respectively. These sequence features are essentially identical to those of chromosomes 3 and 5 in our previous reports. The regions also contained 14 tRNA genes when searched by similarity to reported tRNA genes and the tRNA scan-SE program. The sequence data and information on the potential genes are available through the World Wide Web database KAOS (Kazusa Arabidopsis data Opening Site) at http://www.kazusa.or.jp/kaos/.

Structural analysis of Arabidopsis thaliana chromosome 5. IX. Sequence features of the regions of 1,011,550 bp covered by seventeen P1 and TAC clones.

In this series of projects sequencing the entire genome of Arabidopsis thaliana chromosome 5, non-redundant P1 and TAC clones have been sequenced according to the fine physical map, and as of May 7, 1999, the sequences of 16.2 Mb representing approximately 60% of chromosome 5 have been accumulated and released at our web site. In parallel, structural features of the sequenced regions have been analyzed by applying a variety of computer programs, and to date we have predicted a total of 2380 potential protein-coding genes in the 10,154,580 bp regions, which are covered by 142 P1 and TAC clones. In this paper, we newly analyzed the structural features of the 1,011,550 bp regions covered by additional 17 P1 and TAC clones, and predicted 298 protein-coding genes. The average density of the genes identified was 1 gene per 3394 bp. Introns were observed in 67% of the genes, and the average number per gene and the average length of the introns were 3.2 and 159 bp, respectively. The gene density became higher than the value estimated in the previously analyzed regions (1 gene per 4,267 bp), as the data in this paper were compiled based on a new standard of gene assignment including the computer-predicted hypothetical genes. The regions also contained 8 tRNA genes when searched by similarity to reported tRNA genes and the tRNA scan-SE program. The sequence data and information on the potential genes are available on the database KAOS (Kazusa Arabidopsis data Opening Site) at http://www.kazusa.or.jp/arabi/.

A sequence-ready contig map of the top arm of Arabidopsis thaliana chromosome 3.

A fine physical map of the top arm of Arabidopsis thaliana chromosome 3 has been constructed by ordering P1, TAC and BAC clones using the sequences of a variety of DNA markers and end-sequences of clones. The marker sequences used in this study were derived from 58 DNA markers, 93 YAC end-sequences, and 807 end-sequences of P1, TAC and BAC clones. The entire top arm of chromosome 3, except for the centromeric and telomeric regions, was covered by a single contig 13.3 Mb long. This fine physical map will facilitate gene isolation by map-based cloning experiments as well as genome sequencing of the top arm of chromosome 3. The map and end-sequence information are available on the web site KAOS (Kazusa Arabidopsis data Opening Site) at [http://www.kazusa.or.jp/arabi/].

Structural analysis of Arabidopsis thaliana chromosome 5. V. Sequence features of the regions of 1,381,565 bp covered by twenty one physically assigned P1 and TAC clones.

The nucleotide sequences of 21 P1 and TAC clones which have been precisely localized to the fine physical map of the Arabidopsis thaliana chromosome 5, were determined, and their sequence features were analyzed. The total length of the regions sequenced in this study were 1,381,565 bp, bringing the total length of the chromosome 5 sequences determined so far to 6,691,670 bp together with the regions of the 69 clones previously reported. By computer-aided analyses including similarity search against protein and EST databases and gene modeling with computer programs, a total of 337 potential protein-coding genes and/or gene segments were identified on the basis of similarity to the reported gene sequences. An average density of the genes and/or gene segments thus assigned was 1 gene/4,100 bp. Introns were identified in 76.7% of the potential protein genes for which the entire gene structure were predicted, and the average number per gene and the average length of the introns were 3.9 and 176 bp, respectively. These sequence features are essentially identical to those in the previously reported sequences. The numbers of the Arabidopsis ESTs matched to each of the predicted genes have been counted to monitor the transcription level. The sequence data and gene information are available on the World Wide Web database KAOS (Kazusa Arabidopsis data Opening Site) at http:@www.kazusa.or.jp@arabi

Structural analysis of Arabidopsis thaliana chromosome 5. VIII. Sequence features of the regions of 1,081,958 bp covered by seventeen physically assigned P1 and TAC clones.

A total of 17 Pl and TAC clones each representing an assigned region of chromosome 5 were isolated from P1 and TAC genomic libraries of Arabidopsis thaliana Columbia, and their nucleotide sequences were determined. The length of the clones sequenced in this study summed up to 1,081,958 bp. As we have previously reported the sequence of 9,072,622 bp by analysis of 125 P1 and TAC clones, the total length of the sequences of chromosome 5 determined so far is now 10,154,580 bp. The sequences were subjected to similarity search against protein and EST databases and analysis with computer programs for gene modeling. As a consequence, a total of 253 potential protein-coding genes with known or predicted functions were identified. The positions of exons which do not show apparent similarity to known genes were also assigned using computer programs for exon prediction. The average density of the genes identified in this study was 1 gene per 4277 bp. Introns were observed in 74% of the potential protein genes, and the average number per gene and the average length of the introns were 4.3 and 168 bp, respectively. The sequence data and gene information are available on the World Wide Web database KAOS (Kazusa Arabidopsis data Opening Site) at http://www.kazusa.or.jp/arabi/.

Structural analysis of Arabidopsis thaliana chromosome 5. VI. Sequence features of the regions of 1,367,185 bp covered by 19 physically assigned P1 and TAC clones.

Nineteen P1 and TAC clones, which have been mapped on the fine physical map of the Arabidopsis thaliana chromosome 5, were sequenced according to the shotgun-based strategy, and their structural features were analysed. The total length of the regions sequenced in this study was 1,367,185 bp. Combining this with the regions covered by 90 P1 and TAC clones previously reported, the total length of chromosome 5 sequenced to date becomes 8,058,855 bp. On the basis of similarity search against protein and EST databases and gene modeling with computer programs, a total of 330 potential protein-coding regions were identified, bringing an average density of the genes to approximately one gene per 4.1 kb. Introns were identified in 81.0% of the potential protein genes for which the entire gene structure was predicted, with an average number per gene of 4.2 and an average length of the introns of 180 bp. The RNA-coding genes identified were 9 tRNA genes corresponding to 8 amino acid species and 2 genes for U2 nuclear RNA. These sequence features are essentially identical to those in the previously reported sequences. The sequence data and gene information are available on the World Wide Web database KAOS (Kazusa Arabidopsis data Opening Site) at http://www.kazusa.or.jp/arabi/.

Structural analysis of Arabidopsis thaliana chromosome 5. IV. Sequence features of the regions of 1,456,315 bp covered by nineteen physically assigned P1 and TAC clones.

Nineteen P1 and TAC clones, which have been precisely localized to the fine physical map of Arabidopsis thaliana chromosome 5, were newly sequenced, and their sequence features were analysed. The total length of the clones sequenced was 1,456,315 bp. Together with the previously reported sequences, the regions of chromosome 5 that have been sequenced to date is now 5,310,105 bp. When the sequences determined in this study were subjected to similarity search against protein and expressed sequence tag (EST) databases and analysis with computer programs for gene modeling, a total of 354 potential protein-coding genes and/or gene segments were identified. The average density of the assigned genes and/or gene segments was one gene per 4,114 bp. Introns were identified in 75% of the potential protein genes, and the average number per gene and the average length of the introns were 3.7 and 194 bp, respectively. These sequence features are essentially identical to those in the previously reported sequences. The numbers of the Arabidopsis ESTs matched to each of the predicted genes have been counted to monitor the transcription level. The sequence data and gene information are available on the World Wide Web database KAOS (the Kazusa Arabidopsis data Opening Site) at http://www.kazusa.or.jp/arabi/.

A physical map of Arabidopsis thaliana chromosome 3 represented by two contigs of CIC YAC, P1, TAC and BAC clones.

We have constructed a physical map of Arabidopsis thaliana chromosome 3 by ordering the clones from CIC YAC, P1, TAC and BAC libraries using the sequences of a variety of genetic and EST markers and terminal sequences of clones. The markers used were 112 DNA markers, 145 YAC end sequences, and 156 end sequences of P1, TAC and BAC clones. The entire genome of chromosome 3, except for the centromeric and telomeric regions, was covered by two large contigs, 13.6 Mb and 9.2 Mb long. This physical map will facilitate map-based cloning experiments as well as genome sequencing of chromosome 3. The map and end sequence information are available on the KAOS (Kazusa Arabidopsis data Opening Site) web site at http://www.kazusa.or.jp/arabi/.

Structural analysis of Arabidopsis thaliana chromosome 5. VII. Sequence features of the regions of 1,013,767 bp covered by sixteen physically assigned P1 and TAC clones.

Sixteen P1 and TAC clones assigned to Arabidopsis thaliana chromosome 5 were sequenced, and their sequence features were analyzed using various computer programs. The total length of the sequences determined was 1,013,767 bp. Together with the nucleotide sequences of 109 clones previously reported, the regions of chromosome 5 sequenced so far now total 9,072,622 bp, which presumably covers approximately one-third of the chromosome. A similarity search against the reported gene sequences predicted the presence of a total of 225 protein-coding genes and/or gene segments in the newly sequenced regions, indicating an average gene density of one gene per 4.5 kb. Introns were identified in 72.4% of the potential protein genes for which the entire gene structure was predicted, and the average number per gene and the average length of the introns were 3.3 and 163 bp, respectively. These sequence features are essentially identical to those in the previously reported sequences. The sequence data and gene information are available on the World Wide Web database KAOS (Kazusa Arabidopsis data Opening Site) at http://www.kazusa.or.jp/arabi/.

A fine physical map of Arabidopsis thaliana chromosome 5: construction of a sequence-ready contig map.

A fine physical map of Arabidopsis thaliana chromosome 5 was constructed by ordering the clones from YAC, P1, TAC and BAC libraries of the genome using the sequences of a variety of genetic and EST markers and terminal sequences of clones. The markers used were 88 genetic markers, 13 EST markers, 87 YAC end probes, 100 YAC subclone end probes, and 390 end probes of P1, TAC and BAC clones. The entire genome of chromosome 5, except for the centromeric and telomeric regions, was covered by two large contigs 11.6 Mb and 14.2 Mb long separated by the centromeric region. The minimum tiling path of the chromosome was constituted by a total of 430 P1, TAC and BAC clones. The map information is available at the Web site http://www.kazusa.or.jp/arabi/.

Structural analysis of Arabidopsis thaliana chromosome 5. III. Sequence features of the regions of 1,191,918 bp covered by seventeen physically assigned P1 clones.

A total of 17 P1 and TAC clones each containing a marker(s) specifically mapped on chromosome 5 were isolated from P1 and TAC libraries of the Arabidopsis thaliana Columbia genome, and their nucleotide sequences were determined according to the shot gun-based strategy and precisely located on the physical map of chromosome 5. The total length of the clones sequenced in this study was 1,191,918 bp. As we have previously reported the sequence of 2,662,078 bp by analysis of 33 P1 clones, the total length of the sequences of chromosome 5 determined so far is now 3,853,996 bp. The sequences determined in this study were subjected to similarity search against protein and EST databases and analysis with computer programs for gene modeling, and a total of 310 potential protein-coding genes and/or gene segments with known or predicted functions were identified. The positions of exons which do not show apparent similarity to known genes were also predicted by computer-aided analysis. An average density of the assigned genes and/or gene segments was 1 gene/3,845 bp. Introns were identified in 78% of the potential protein genes, and the average number per gene and the average length of the introns were 3.7 and 185 bp, respectively. The numbers of the Arabidopsis ESTs matched to each of the predicted genes have been counted to monitor the transcription level. The sequence data and gene information are available on the World Wide Web database KAOS (Kazusa Arabidopsis data Opening Site) at http://www.kazusa.or.jp/arabi/.