Sequence Stratigraphy Research Articles

Evolution of Sequence Stratigraphy and Paleogeography, Case Study: M2 Member of the Muara Enim Formation

Sequence stratigraphy related to accommodation space as an area of potential sediment accumulation that is influenced by fluctuations in sea level and subsidence of the basin floor. Paleogeography, on the other hand, is the study of physical geographic features and their evolution throughout geological periods. The aim of this work is to shed light on the relationship between paleogeographic evolution and sequence stratigraphy, as well as coal accumulation in the South Sumatra Basin. The method used are geophysical logs and cores analysis to determine the system tracts, types of system tracts, and stratigraphic sequences, lithofacies and sedimentary facies analysis, paleogeographic analysis using modified single-factor and multi-factor and them mapped using IDW as a geostatistical method. The results indicate that the study area comprises four system tracts, namely TST-1, HST-1, TST-2 and HST-2. In TST-1 and TST-2, the rate of peat formation is balanced with the rate of accommodation space formation, resulting in continuous and very thick coal accumulation. In HST-1 and HST-2, the rate of accommodation space formation exceeds the rate of peat formation, leading to continuous coal accumulation that is quite thick to very thick. Sequence 1 consists of lagoon and tidal/mouth/distal bar paleogeographic unit with sand/shale ratio range 0.217 to 0.247. Sequence 2 consists of lagoon paleogeographic units with sand/shale ratio range 0.046 to 0.05.

Sequence stratigraphy, diagenesis and geological zonation of the lower Triassic carbonate reservoir of the Kangan formation from the central to Northern Persian Gulf

Sequence stratigraphy, diagenesis and geological zonation of the lower Triassic carbonate reservoir of the Kangan formation from the central to Northern Persian Gulf

Geological Modeling of Shale Oil in Member 7 of the Yanchang Formation, Heshui South Area, Ordos Basin

In recent years, the Chang 7 member of the Mesozoic Triassic Yanchang Formation in the Ordos Basin has emerged as a significant repository of abundant and distinctive unconventional oil resources. The Heshui area boasts substantial shale oil reserves, with reported third-level reserves surpassing 600 million tons. However, the region in the southern part of Heshui is marked by pronounced variability in reservoir quality, intricate oil–water dynamics, low formation energy, and suboptimal fluid properties, leading to divergent development outcomes for horizontal wells. There is an imperative need to devise and refine new geological models to underpin the efficient exploitation of shale oil in the southern Heshui area. This study focuses on the shale oil reservoir of the Chang 7 member in the southern Heshui area of the Ordos Basin, conducting detailed stratigraphic correlation and establishing a refined isochronous stratigraphic framework. Utilizing PetrelTM modeling software (version 2018), we integrate deterministic and stochastic modeling approaches, adhering to the principles of isochronous and phased modeling. By assessing the thickness of sand and mudstone layers and the overall stratigraphic sequence, we derive a geological probability surface. Subsequently, this surface is harnessed to constrain the lithofacies, yielding a constrained lithofacies model. Employing sequential indicator simulation and sequential Gaussian stochastic simulation, we develop a reservoir attribute model that is anchored in the lithofacies model and its controls, culminating in a robust and dependable static model. Employing the geological probability surface constraint method, we meticulously construct the reservoir matrix model, amalgamating individual well data with the inherent certainty and randomness of reservoir plane thickness. This approach further enhances the model’s accuracy and mitigates the uncertainty and randomness associated with inter-well interpolation to a significant degree.

Retrogradation of carbonate platforms on a rifted margin: the late Ediacaran record of the northwestern Yangtze Craton (SW China)

The Late Ediacaran Dengying Formation, located in the Sichuan Basin of the northwestern Yangtze Craton, is of significant interest in oil and gas exploration due to its abundant pores and vugs within microbial mound-shoal complexes. However, there is still uncertainty regarding the spatiotemporal distribution and controlling factors of the platform margin. This study comprehensively analyzes the retrogradation pattern of the Dengying Formation platform margin using seismic data, well logs, field outcrops, and petrological characteristics. Our findings reveal that the Dengying Formation strata surrounding the rift basin at the northwestern of the Yangtze Craton can be divided into three main depositional facies: basin facies, slope facies, and platform margin facies. Additionally, based on the integration of lithological, log, and seismic characteristics, the Dengying Formation is subdivided into four third-order sequences, with five sequence boundaries and three seismic facies identified. Supported by sequence stratigraphy and geophysical data, we have reconstructed the tectono-sedimentary evolution of the multiple platform margins on the eastern side of the Deyang-Anyue rift in the Sichuan Basin during the late Ediacaran. Our findings indicate that the platform underwent two phases of retrogradation. The second-stage platform margin underwent retrogradation towards the interior, spanning a distance between 10 and 80 km, based on the initial configuration established by the first-stage platform margin. The main controls for progradation and retrogradation of carbonate platforms are eustatic sea-level changes and tectonic activity. Eustatic sea-level changes can be divided into constructive and destructive phases. Constructive phases are commonly observed in highstand systems tracts, while destructive phases are often associated with transgressive systems tracts and are related to platform retrogradation processes. However, sea-level changes alone cannot fully control the process of platform retrogradation. The thermal subsidence following mantle plume events likely played a significant role in the retrogradation of the platform in the study area. During this period, tectonic processes controlled the geometry of the platform and the deposition of carbonates in the platform margin-slope-basin environment. Additionally, karst-related mound-shoal complexes developed extensively along the platform margin of the Dengying Formation in the northwestern Yangtze Craton. The Lower Cambrian dark shales represent high-quality hydrocarbon source rocks, while the Dengying Formation exhibits an optimal source-reservoir configuration.

Multiproxy faunal analysis of the middle – upper Eocene deposits in the Fayum area, Egypt: Insights into sequence stratigraphy, trophic conditions, and oxygenation

The Eocene epoch experienced significant fluctuations in climate, ranging from intense greenhouse warming to icehouse cooling, which profoundly impacted the global depositional systems. The middle – upper Eocene deposits in Garet Gehannam, Fayum area, Egypt, present an exciting opportunity to explore paleoenvironmental dynamics using a multiproxy dataset of calcareous nannofossils, benthic foraminifera, ostracods, and molluscan assemblages. Calcareous nannofossil biostratigraphy constrained the studied sequence to the NP17 and NP-19-20 zones. Furthermore, three 3rd-order depositional sequences, BAR.SQ.1, BAR.SQ.2, and PR.SQ.3 were identified. The BAR.SQ.1 sequence encompasses the Gehannam Formation, with a transgressive systems tract (TST) and a highstand systems tract (HST). The BAR.SQ.2 sequence corresponds to the lower Birket Qarun Formation and exhibits a TST/HST pattern. The PR.SQ.3 sequence, however, consists solely of a TST spanning the upper Birket Qarun and Qasr El Sagha formations. The main trend of our multiproxy-based sea level curve shows an overall stepped Tethyan sea level regression within the 2nd-order cycle. This regression is characterized by a transition from outer neritic to inner settings, interrupted by two minor 3rd-order transgressive pulses. This sea level trend was likely driven by global eustatic changes and regional tectonic uplift related to the final collisional phase between Africa/Arabia and Eurasia, which led to the closure of the Neotethys Ocean. Multiproxy faunal analysis reveals a pronounced upsection shift from low-oxic and mesotrophic conditions to well-ventilated, oligotrophic settings tracking long-term sea level fall. The lowering of the sea level may have expanded aerobic ventilation windows on the continental shelf while potentially reducing nutrient influx. Our multiproxy sequence stratigraphic and paleoenvironmental analysis provides insights into the complex interplay of tectonic, eustatic, and climatic influences on the region during the middle – late Eocene episode along the southern Tethyan margin.

Sedimentology and clay mineralogy of the Palaeogene stratigraphic sequence of the Schneidlingen 1/2018 research well.

Sedimentology and clay mineralogy of the Palaeogene stratigraphic sequence of the Schneidlingen 1/2018 research well.

Updating the Upper Cretaceous (Campanian) Two Medicine Formation of Montana: Lithostratigraphic revisions, new CA-ID-TIMS U-Pb ages, and a calibrated framework for dinosaur occurrences

The Campanian Two Medicine Formation of northwestern Montana, USA, is richly fossiliferous, and discoveries made within the unit over the past century have greatly advanced our appreciation of dinosaur paleobiology and evolution. Previously undifferentiated from a lithostratigraphic perspective, the formation is now subdivided into four new members that include (from base to top) (1) the Rock City Member, (2) the Shields Crossing Member, (3) the Hagans Crossing Member, and (4) the Flag Butte Member. These new formal units and their associated fossil occurrences are also now included in an age model founded on eight high-resolution chemical abrasion−isotope dilution−thermal ionization mass spectrometry (CA-ID-TIMS) U-Pb ages. New age data confirm that the Two Medicine Formation accumulated during much of the Campanian, with deposition spanning ca. 82.4 Ma to 74.4 Ma. New age data further indicate that a major reorganization of depositional systems, marked by a shift from predominantly lacustrine to alluvial facies and accompanied by a dramatic increase in accommodation, transpired near the base of the new Flag Butte Member at ca. 76.3 Ma. This change in depositional regime correlates in age with the Judith River−Belly River discontinuity, which marks the contact between the McClelland Ferry and Coal Ridge Members in the Judith River Formation and coincides with the onset of the Bearpaw transgression in north-central Montana. The new lithostratigraphic and chronostratigraphic framework for the Two Medicine Formation serves to contextualize and calibrate the formation’s rich dinosaur fossil record, which can now be interrogated with increased clarity and precision. These results also provide ground truth for numerical models that explore the structure of the fossil record in relation to alluvial architecture and terrestrial sequence stratigraphy.

Intra-Turonian stratigraphic reorganization on the Arabian Plate

Shallow-marine carbonate deposition was widespread across the Arabian Plate during much of the Late Permian–Mesozoic but was significantly interrupted by a major tectonically driven stratigraphic reorganization that took place within the Turonian. Published literature terms this the ‘Wasia–Aruma Break’, the ‘mid-Turonian Unconformity’, or the ‘K150 Sequence Boundary (SB)’. It is widely understood that this event relates to subduction in a closing Neotethys Ocean and obduction onto the continental margin, especially in the southeastern part of the plate. As well as a change in facies, a hiatus of variable duration is present, associated with erosion of the underlying stratigraphy. Despite the event being known for several decades, precision on its timing has been lacking due to the limitations of biostratigraphic data and because few other chronostratigraphic proxies have been employed. In order to rectify this, all relevant biostratigraphic data from across the Arabian Plate have been synthesized and evaluated in the context of a review of chronostratigraphic calibration of standard biozones from multiple fossil groups. This shows that the youngest preserved rocks beneath the K150 SB can be assigned to the middle Turonian Helvetoglobotruncana helvetica planktonic foraminifera zone or Collignoniceras woollgari ammonite zone. The oldest rocks above the K150 SB can be assigned to the same biozones, supporting the assertions that it is a very short duration event. Whilst obduction may have initiated earlier (as supported by the recognition of precursor events), crustal loading was sufficient by 91.5 Ma to develop a forebulge in the eastern part of the plate with associated uplift and erosion. A review of relative sea-level change during the Turonian has been carried out to investigate eustatic signals during this time. In multiple sections around the world, a sea-level fall in the upper part of the woollgari Zone of European usage can be detected. This appears to coincide with an episode of climate cooling. However, despite there being correspondence between the K150 SB and a significant eustatic event, this seems mostly coincidental as the tectonic drivers at this time across Arabia were much more dramatic. This is especially true in southeastern Arabia. In northwestern Arabia, tectonic quiescence may have allowed eustasy to dominate. In any case, a eustatic fall would have amplified the effects of tectonics across the entire region.

Sedimentary Facies, Depositional Environment, and High-resolution Sequence Stratigraphy of Dernah Formation, N Cyrenaica Promontory, NE Libya

The depositional environment and high-order stratigraphic architecture of the Eocene Dernah Formation in N Cyrenaica Promontory, NE Libya, were interpreted through detailed sedimentary facies and sequence stratigraphic analyses of four measured sections located several kilometers apart. Five distinct lithofacies were delineated based on variations in lithology, grain composition, fossil content, texture, color, and stacking pattern. Dernah Formation mainly contains nummulitic limestone with a noticeable amount of Discocyclina and rare gastropods. The extraordinary presence of Nummulites indicates shallow-marine carbonate settings, perhaps a Nummulite bank environment, where the reworking of sediments by wave- or tide-induced currents and storms is high. Two complete fifth-order depositional sequences were defined. Each sequence was subdivided into a transgressive and a regressive hemicycle based on the vertical lithological variation and stacking pattern of facies. We conclude that each sequence may have formed as a result of a fifth-order sea-level cycle. This study reconstructs a three-dimensional model for the Nummulite bank environment in the Mediterranean region, which can serve as an analog for similar depositional systems elsewhere.

The volcanic architecture and tectono-magmatic framework of the Mount Grace carbonatites, southeastern Canadian Cordillera

The Mount Grace metamorphosed carbonatites (Late Devonian) outcrop as thin (0.5–4 m), laterally discontinuous, strata-bound mappable lenses within the Monashee complex of the southeastern Canadian Cordillera. The host stratigraphic sequence (Monashee cover gneiss) was metamorphosed and deformed in the Late Cretaceous to early Eocene followed immediately by exhumation of the Frenchman Cap and Thor Odin domes. We present seven stratigraphic logs for Mount Grace carbonatites including new and previously described outcroppings spanning ∼30 km. The Mount Grace carbonatite units were deposited regionally within or near the top of a shallow marine sedimentary sequence within miogeoclinal strata of the western margin of paleo-North America (Laurentia). The distribution of the Mount Grace carbonatite lithofacies and the preserved depositional structures and textures suggest that these are pyroclastic deposits resulting from phreatomagmatic eruptions. Our new data enhance the volcanological story with an eruption scenario involving phreatomagmatic reactions and deposition from pyroclastic density currents, sourced from multiple centers within a field of monogenetic maar volcanoes. The distribution of the Mount Grace carbonatites parallel to the western margin of the paleo-North American continent correlates well with regional Late Devonian alkaline magmatism associated with development of an extensional back-arc basin.

A revisit to the Early Pliocene site of Abla (Guadix-Baza Basin, southern Spain)

The Guadix-Baza Basin (southern Spain) displays one of the best continental records from the Late Miocene to the Middle Pleistocene in western Europe, with many localities of fossil small mammals in a quite complete and continuous stratigraphic sequence. The Late Miocene continentalization of the Guadix-Baza Basin was firstly mentioned in the 1980s based on the presumed presence of Hipparion gromovae granatensis at the site of Abla (Almería province). Subsequent discoveries of late Turolian deposits confirmed the Late Miocene continentalization of the basin. The interest in the Abla site led to a second sampling campaign to look for microvertebrate fossils, which proved successful. In this paper, a complete taxonomic study of the novel microvertebrate fauna from Abla is presented, providing updated information on the age of the locality. Representatives of the vertebrate families Cyprinidae, Alytidae, Anguidae, Soricidae, Cricetidae, and Muridae have been identified. The presence of Stephanomys specimens exceeding the size of latest Miocene-earliest Pliocene species allows us to correlate the Abla site with the Early Pliocene (Ruscinian), a younger age than initially stated. A qualitative paleoecological interpretation based on the herpetofauna suggests the dominance of open environments with presence of permanent water bodies during the deposition of the Abla site, under warmer and more humid climate conditions than today in the Guadix-Baza Basin. A revision of the Hipparion remains from this locality showed that the sample is closer to Hipparion fissurae than to the initially assigned species.

Middle and Late Pleistocene Denisovan subsistence at Baishiya Karst Cave

Genetic and fragmented palaeoanthropological data suggest that Denisovans were once widely distributed across eastern Eurasia1–3. Despite limited archaeological evidence, this indicates that Denisovans were capable of adapting to a highly diverse range of environments. Here we integrate zooarchaeological and proteomic analyses of the late Middle to Late Pleistocene faunal assemblage from Baishiya Karst Cave on the Tibetan Plateau, where a Denisovan mandible and Denisovan sedimentary mitochondrial DNA were found3,4. Using zooarchaeology by mass spectrometry, we identify a new hominin rib specimen that dates to approximately 48–32 thousand years ago (layer 3). Shotgun proteomic analysis taxonomically assigns this specimen to the Denisovan lineage, extending their presence at Baishiya Karst Cave well into the Late Pleistocene. Throughout the stratigraphic sequence, the faunal assemblage is dominated by Caprinae, together with megaherbivores, carnivores, small mammals and birds. The high proportion of anthropogenic modifications on the bone surfaces suggests that Denisovans were the primary agent of faunal accumulation. The chaîne opératoire of carcass processing indicates that animal taxa were exploited for their meat, marrow and hides, while bone was also used as raw material for the production of tools. Our results shed light on the behaviour of Denisovans and their adaptations to the diverse and fluctuating environments of the late Middle and Late Pleistocene of eastern Eurasia.

Selection and application of wavelet transform in high-frequency sequence stratigraphy analysis of coarse-grained sediment in rift basin

Wavelet transformation is a widely used method in high-frequency sequence stratigraphic analysis. However, the application is problematic since different wavelets always return the same sequence analysis results. To address this issue, we applied five commonly used wavelets to theoretical sequence models to document some application criteria. Five gradual scale-change sequence models were simplified from the glutenite succession deposition by gravity flows to form the fining-upwards cycle sequences (FUCS) and coarsening-upwards cycle sequences (CUCS). After conducting theoretical sequence model tests, the optimal wavelet (sym4) was selected and successfully used with actual data to identify the sequence boundaries. We also proposed a new method to optimize the scale of continuous wavelet transformation (CWT) for sequence boundary determination. We found that the balloon-like marks in scalograms of db4, sym4, and coif4 wavelet determine, respectively, the fourth-order sequence boundary, the thick succession sequence boundaries in FUCS, and the thick succession sequence in FUCS and CUCS. Comparing the sequence identification results shows that the asymmetric wavelets had an advantage in high-frequency sequence boundary determination and sedimentary cycle discrimination through the amplitude trend of the coefficient, in which the sym4 wavelet is the most effective. In conclusion, the asymmetry of wavelets is the first selection principle, of which asymmetric wavelets are more sensitive to sediment deposition by flood flows. The match of the wavelet between the sequence is the second selection principle, in which the correlation of time-frequency impacts the accuracy of sequence surface localization. However, the waveform of the wavelet is a visual and abstract parameter for sequence boundary detection. The appropriate wavelet for lacustrine sequence analysis is the asymmetric wavelet with a weak number of side lobes. The depositional flows, depositional process, and autogenic are three sedimentary factors that influence the sequence analysis results.

Facies Analysis and Sequence Stratigraphy of Plio-Pleistocene Fan Delta Deposits in the East Arm Sulawesi, a case study of Biak Formation, Luwuk, Banggai

Abstract Fan delta deposits were found widespread in the east arm of Sulawesi as the area experienced tectonic uplift during Plio-Pleistocene continental collision, known as Bongka Formation in the western part and Biak Formation in the eastern part. One of key outcrops for Biak Formation was observed in Biak Village, North Luwuk District, Banggai Regency, thus served as the lithotype location for the Biak Formation. The outcrop was a roadcut and had a 50 m long and 25 m high. In general it shows a coarse-grained heterolithic inclined strata dipping southward and overlain by horizontal strata of similar facies. Its sequence stratigraphy was analyzed by examine its facies, facies association, petrography, and paleontology, along a 1:100 scaled measured section. Six lithofacies were identified, namely conglomeratic coralline limestone, conglomeratic coralline limestone, parallel bedding – gradation conglomerate-sandstone, gravely sandstone, conglomerate-sandstone – conglomeratic corraline limestone and gradation conglomerate-sandstone with horizontal bedding. Their lithofacies deposited during Late Pliocene in a transition – inner neritic environment. Their facies association made several depositional system tracts, showing a complete cycle of Highstand System Tract (HST), Sequence Boundary/Correlative Conformity (SB/CC), Lowstand System Tract (LST), Transgressive System Tract (TST), Transgressive Surface (TS) later capped by younger HST and LST. Result of this study suggesting repetitive cyclic depositiona tracts dictated by sea-level eustacy and tectonic uplift. This location served as an ideal outcrop as a textbook example to study sequence stratigraphy in an outcrop scale.

Sequence Stratigraphy and Depositional Environment of the ‘Perahu’ Sand, Bekasap Formation, ‘DAP’ Field, Central Sumatera Basin

Abstract The ‘DAP’ Field is one of the oil and gas fields within the Central Sumatera Basin that is proven to have hydrocarbon reserves. One of the proven reservoirs in the ‘DAP’ Field is the ‘Perahu’ Sand, Bekasap Formation. This study aims to determine the depositional environment and facies distribution focusing on the ‘Perahu’ Sand, Bekasap Formation through a sequence stratigraphic approach. The research was based on an integrated analysis of sedimentary facies from one core data and a key well log to interpret the facies association. Then the key well is correlated to eight other well logs with the help of sequence stratigraphic concept to determine the depositional facies distribution and succession at the study interval. Lithofacies that are identified from core data were interpreted as floodplain, tidal channel, mud flat, mix flat, and sand flat, hence the depositional environment of ‘Perahu’ Sand was interpreted to be a tide-dominated estuarine. The parasequence set level of Bekasap Formation was interpreted to be in a transgressive system tract, with the ‘Perahu’ Sand divided into three flooding surfaces that is FS3, FS4, and FS5. The FS3 distribution consists of tidal-fluvial channel, crevasse splay and floodplain facies. The FS4 distribution consists of two tidal channels and one sand flat facies. The FS5 distribution consists of one sand flat facies. The depositional trend of the ‘Perahu’ Sand shows a northeast to southwest trend, with basinward toward southwest.

Late syn‐rift to early post‐rift basin fill dynamics of a mixed siliciclastic‐carbonate succession banked to a basement high, Hornsund, southwestern Spitsbergen, Arctic Norway

AbstractThe transition from syn‐rift to post‐rift sedimentation in rift basins is difficult to characterize in terms of stratigraphic architecture and dominating control on sedimentation, due to decreasing tectonic activity interplaying with regional subsidence, eustatic sea level changes, and differential compaction of underlying syn‐rift sediments. Our case study of the Late Palaeozoic Inner Hornsund Fault Zone targets late syn‐rift strata recorded in the (?Pennsylvanian – ?lower Permian) Treskelodden Formation in Hornsund, southern Spitsbergen, representing a mixed siliciclastic‐carbonate succession, with siliciclastics primarily sourced from the adjacent Sørkapp‐Hornsund High. We document local scale (<10 km) facies variability, sequence stratigraphy, and evolution of a succession deposited along a flank of the structural high during the late syn‐rift stage. We observe that during the transition towards rift termination (glacio‐)eustatic sea level changes and overall regional flooding became a more prominent forcing factor controlling sedimentation. Our dataset includes sedimentary logs, microfacies analysis, and high‐resolution digital outcrop models. We identify four progressively backstepping stratigraphic sequences, reflecting an evolution from (1) terrestrial siliciclastics through (2–3) nearshore mixed siliciclastic–carbonates, to (4) carbonate ramp deposits. On the small scale (<5 m) the internal sediment cyclicity of the succession was formed by autogenic processes, particularly the changing rate of sediment input from the southwestern source area (the uplifted Sørkapp‐Hornsund basement high). On the larger scale (10s of m), the importance of glacio‐eustatic sea‐level changes, driven by waxing and waning of ice caps in the southern hemisphere (Gondwana), increased as the rift‐related tectonics decreased. The interdisciplinary methods used in this study provide new knowledge of the Middle Pennsylvanian to Permian depositional evolution in southern Spitsbergen, besides a novel framework for comparison to adjacent basins in the region and similar basins elsewhere.

Ypresian–Lutetian platform evolution in the Indus Basin, Southwestern Pakistan: An interplay between local and regional tectonic changes

The present investigation aims to analyze the depositional environment, sequence stratigraphy, and geochemistry of the Early–Middle Eocene succession in the Laki Range of the Southern Indus Basin, Pakistan. The sequence is subsequently correlated with other sections within the Southern Indus Basin, Central Indus Basin, Upper Indus Basin, and Hazara Basin in Pakistan. For this study, the Lakhra and Laki formations were sampled from four sections in the Laki Range. Based on detailed outcrop observations, eight lithofacies were identified including four clastic lithofacies (CLF-1 to 4) and four limestone lithofacies (LLF-1 to 4). Similarly, based on detailed petrographic examination, seven microfacies were identified in limestone units. Considering the biotic paleoecology, facies texture, and chemical composition, depositional environments were assigned to the microfacies and lithofacies. All the microfacies, and the shale and sandstone lithofacies (CLF-1 and CLF-4) represent shallow inner to deeper outer-shelf settings whereas the other two lithofacies (CLF-2 and CLF-3) represent deltaic and tidal flat settings, respectively. All the microfacies and lithofacies information was used to establish sequence stratigraphy for the studied strata. The top of the Lakhra Formation and the whole of the Laki Formation in the Bara Nala Section (BNS) represent two complete, and two partial, third-order sequences, further divided into fourth order and small-scale cycles. The sequence's development is primarily influenced by regional and local tectonics. The regional correlation of the Indus Basin and Hazara Basin indicates that the regional basin's bathymetry and resultant depositional sequence were significantly influenced by the Himalayan Orogeny. The regional depositional pattern indicates that subsequent to India–Asia collision, the closure of eastern Tethys took place in a temporal succession from northwestern to the southwestern parts of the Indus Basin. In the Central Indus Basin, marine environments persisted until the Priabonian Stage (SBZ20) compared to those of the Upper (SBZ11–12) and Southern (SBZ13–14) Indus basins. This study offers valuable insights into both the local and regional depositional frameworks and the influence of local and regional tectonics on a carbonate platform evolution.

The fossil avian assemblage from Cova Foradada (Calafell, Spain) during the Late Pleistocene to Holocene transition

The end of the Pleistocene to the Holocene is a moment of particular interest, as several environmental changes coincided with some significant culture shifts: the Middle-to-Upper Palaeolithic and the Palaeolithic to Neolithic transitions. Here we present the analysis of the environmental conditions during this period in the Northeast Iberian Peninsula, based on the bird remains from Cova Foradada (Calafell, Tarragona), a site known for its archaeological record, including the symbolic use of imperial eagle phalanges. The stratigraphic sequence of the site is divided into five units, spanning from the Late Pleistocene (Units V to III) to the Northgrippian (Units II and I). A total of 1310 avian remains from these five units have been analysed, revealing the presence of at least 25 bird taxa. This suggests a landscape dominated by open areas with forest or scattered trees. The presence of four species, currently absent around the site, could be related to habitat expansions during colder periods, or to sporadic visits to the area. The layers in Unit IV show a trend towards a reduction in woodlands and an increase of open areas, which may be related to the Heinrich 4 event (ca. 40Ka). The layers in Unit III show the lowest proportion of woodlands and the highest proportions or rocky areas in the sequence. In the Holocene units the presence of water bodies is indicated by the presence of aquatic taxa. Diurnal birds of prey appear to be the main contributors to the bird accumulation, and probably also contributed to the accumulation of leporids. The impact of humans on birds at the site has been documented in several remains, confirming the mixed origin of the avian accumulation and contributing to increasing cases of interaction between humans and large diurnal raptors during Iberian prehistory.

Sandstone facies distribution of potential reservoirs within lower talang akar formation in ‘Jasmine’ Field, Northwest Java Basin

Abstract ‘Jasmine’ Field is an oil and gas field in the working area of a national oil company located in Northwest Java Basin. Lower Talang Akar Formation is considered to have one of the largest sandstone reservoir potentials in Northwest Java Basin based on earlier studies. This study aims to determine the depositional environment of Lower Talang Akar Formation and get the sandstone facies distribution of potential reservoirs in ‘Jasmine’ Field, as an early guideline for future production and drilling in new points within the field. Interpretation of this study was carried out by integrating 13 well log data, 13 well report data, 2 core data, and 1 3D seismic cube. Well log, well report, and core data were integrated to interpretate lithofacies, electrofacies, depositional environment, and stratigraphy sequence analysis. Sandstone body width vs. thickness ratio determination, fluid contact analysis, and RMS seismic attribute method were then carried to obtain the sandstone facies distribution of potential reservoir intervals of Talang Akar Formation in ‘Jasmine’ Field. The results shows that there are 2 intervals that has thick sandstone bodies as potential reservoirs in this study. The deposition direction for both Sandstone Body-A group and Sandstone Body-B group intervals is northeast-southwest. Sandstone Body-A group facies distribution is controlled by a braided river depositional environment and is distributed in the west side of the field. In the other hand, Sandstone Body-B group facies distribution is controlled by a distributary channel system in a lower delta-plain depositional environment and is distributed in both the west side and east side of the field.

The triassic formations of Kuwait: From geological concepts to numerical forward stratigraphic modelling applications

The Triassic exploration campaign onshore Kuwait initiated during the 1980s was mainly based on the evaluation of regional 2D seismic data. To date, few scattered wells have penetrated this succession reaching the Minjur, Jilh and Sudair mixed clastic and carbonate formations. The latter reservoirs are expected to hold potential gas and condensates that are yet to be proven. This communication aims at deciphering the spatial and temporal evolution of sedimentary architectures and associated Triassic depositional environments and facies along Kuwait. An integrated G&G assessment utilizing multi-disciplinary and multi-scale dataset allowed to identify the major petroleum system elements and develop sequential conceptual depositional models. The proposed models are then tested using numerical process-based forward stratigraphic applications. The seismic interpretation points to dominantly south to north oriented progradations centered on the Dibdibah low with thicknesses reaching around 1300 ft in the Sudair. In addition, progradations oriented from East to West highlight the location of the basin margins around the Kuwait Arch and its northern extension. These prograding tendencies are also identified in the overlying Jilh Formation. Onlapping reflectors point to transgressional systems related to flooding events that are expected to deposit marine fine-grained carbonatesand thus act as potential seals. Minjur Formation on the other hand, shows thick siliciclastic deposits along the southern sector of the Kuwait Arch. These fluvio-deltaic deposits are 150 feet thick and thin towards the west. Stratigraphic modelling allowed to test and constrain the paleobathymetric evolution of the system. The latter ranges between 0 and 20 m (inner ramp) and 20–40 m (Middle ramp) and reaches up to 80 m in the deeper sectors of the basin. The resultant facies at 3rd- 4th stratigraphic order highlights the evolution of lithologies and facies with regards to the various system tracts leading to a better understanding of the timing and spatial extent of mixed carbonate systems, evaporites and siliciclastics. Future works will focus on a higher resolution mapping of geobodies and prospects using integrated shared earth approaches including seismic multi-attribute assessment and 3D inversion and characterization driven by novel artificial intelligence workflows.